pH-Dependent Chemical Transformations of Humic-Like Substances and Further Cognitions Revealed by Optical Methods

Molecular characteristics of dissolved organic matter regulate the binding and migration of tungsten in porous media

Tungsten (W) is an emerging contaminant that poses potential risks to both the environment and human health. While dissolved organic matter (DOM) can significantly influence the W's environmental behavior in natural aquifers, the mechanisms by which DOM's molecular structure and functional group diversity impact W binding and migration remain unclear. Using molecular weight-fractionated soil and sediment DOM (<1 kDa, 1-100 kDa, and 100 kDa-0.45 μm), this study systematically investigated the relationship between DOM molecular characteristics and tungstate (WO42-) binding properties using multiple spectroscopic methods, including FTIR, fluorescence spectroscopy and XPS. The migration behavior of WO42- in porous media was also investigated through quartz sand column experiments. Results revealed that approximately 75 % of W was controlled by DOM, with over 50 % binding to low molecular weight DOM (<1 kDa). Tungsten bound to medium-high molecular weight DOM (1-100 kDa, >100 kDa) showed a greater propensity for retention, with the >100 kDa fractions demonstrating stronger selective binding to W, exhibiting distribution coefficients (Kmd) of 6.11 L/g and 10.69 L/g, respectively. Further analysis indicated that W primarily binds with aromatic rings, phenolic hydroxyls, polysaccharides, and carboxyl groups in DOM, potentially affecting DOM structural stability and consequently influencing W migration characteristics. Free W migration in quartz sand was primarily controlled by Langmuir monolayer adsorption, leading to local enrichment (Da = 6.83, Rd = 86.98). When bound to DOM, W's migration ability significantly increased (Rd = 8-10), with adsorption shifting to a Freundlich multilayer model, primarily controlled by convective transport (Npe = 27-62> > 1.96), while adsorption effects weakened (Da ≈ 1). This study, for the first time, systematically reveals the regulatory mechanisms of DOM molecular characteristics on tungsten's environmental behavior. It offers crucial parameter support for constructing tungsten migration models and provides important guidance for tungsten pollution risk assessment and remediation strategies.

Effects of copper on chemical kinetics and brown carbon formation in the aqueous ˙OH oxidation of phenolic compounds

Many phenolic compounds (PhCs) in biomass burning and fossil fuel combustion emissions can partition into atmospheric aqueous phases (e.g., cloud/fog water and aqueous aerosols) and undergo reactions to form secondary organic aerosols (SOAs) and brown carbon (BrC). Redox-active transition metals, particularly Fe and Cu, are ubiquitous species in atmospheric aqueous phases known to participate in Fenton/Fenton-like chemistry as a source of aqueous ˙OH. However, even though the concentrations of water-soluble Cu are close to those of water-soluble Fe in atmospheric aqueous phases in some areas, unlike Fe, the effects that Cu have on SOA and BrC formation in atmospheric aqueous phases have scarcely been studied and remain poorly understood. We investigated the effects of Cu(II) on PhC reaction rates and BrC formation during the aqueous oxidation of four PhCs (guaiacol, catechol, syringol, and vanillin) by ˙OH generated from Fenton-like chemistry under different pH conditions. While the PhCs reacted when both H2O2 and Cu(II) were present in the absence (i.e., dark oxidation) and presence (i.e., photooxidation) of light, the reaction rates were at least one order of magnitude higher during photooxidation. Higher PhC reaction rates were measured at higher pH during both dark oxidation and photooxidation as a result of higher ˙OH concentrations produced by Fenton-like chemistry. Only water-soluble BrC was formed during dark oxidation and photooxidation when Cu(II) was present. Mass absorption coefficients (103 to 104 cm2 g-1) comparable to those of biomass burning BrC were measured during dark oxidation and photooxidation when Cu(II) was present. Light absorption was enhanced at higher pH during dark oxidation and photooxidation, which indicated that higher quantities and/or more absorbing BrC chromophores were formed at higher pH. The effects that Cu(II) had on the PhC reaction rates and the composition of SOAs and BrC formed depended on the PhC base structure (i.e., benzenediol vs. methoxyphenol). Overall, these results show how aqueous reactions involving Cu(II), H2O2, and PhCs can be an efficient source of daytime and nighttime water-soluble BrC and SOAs, which can have significant implications for how the atmospheric fates of PhCs are modeled for areas with substantial concentrations of water-soluble Cu in highly to moderately acidic cloud/fog water and aqueous aerosols.

Biogenic and Anthropogenic Secondary Organic Aerosols Become Fluorescent after Highly Acidic Aging

Primary biological aerosol particles (PBAPs) and secondary organic aerosol (SOA) both contain organic compounds that share similar chemical and optical properties. Fluorescence is often used to characterize PBAPs; however, this may be hindered due to interferences from fluorophores in SOA. Despite extensive efforts to understand the aging of SOA under elevated particle acidity conditions, little is known about how these processes affect the fluorescence of SOA and thereby their interference with the measurements of PBAPs. The objective of this study is to investigate the fluorescence of SOA and understand the influence of acidity on the optical properties of organic aerosols and potential interference for the analysis of bioaerosols. The SOA was generated by O3- or OH-initiated oxidation of d-limonene or α-pinene, as well as by OH-initiated oxidation of toluene or xylene. The SOA compounds were then aged by exposure to varying concentrations of aqueous H2SO4 for 2 days. Absorption and fluorescence spectrophotometry were used to examine the changes in the optical properties before and after aging. The key observation was the appearance of strongly light-absorbing and fluorescent compounds at pH = ∼-1, suggesting that acidity is a major driver of SOA aging. The aged SOA from biogenic precursors (d-limonene and α-pinene) resulted in stronger fluorescence than the aged SOA from toluene and xylene. The absorption spectra of the aged SOA changed drastically in shape upon dilution, whereas the shapes of the fluorescence spectra remained the same, suggesting that the fluorophores and chromophores in SOA are separate sets of species. The fluorescence spectra of aged SOA overlapped with the fluorescence spectra of PBAPs, suggesting that SOA exposed to highly acidic conditions can be confused with PBAPs detected by fluorescence-based methods. These processes are likely to play a role in the atmospheric regions where high concentrations of H2SO4 persist, such as the upper troposphere and lower stratosphere.

Photochemical activity of water-soluble organic compounds in motor vehicle exhaust particulate matter

Particulate matter from motor vehicle exhaust is a type of important atmospheric particulates, which can absorb sunlight affecting its photochemical behavior. However, the photochemical activity of water-soluble organic compounds (WSOC) in motor vehicle exhaust particulate matter has not been explored. Here, we applied WSOC in particulate matter from motor vehicle exhaust to investigate the photogenerating ability of its reactive oxygen species (ROS) and its effect based on model phenol photodegradation with the comparison between WSOC in diesel particulate matter and in gasoline particulate matter. The WSOC in diesel particulate matter indicates higher abililty to generate ROS. The main active substance produced by WSOC in the presence of light is 3WSOC*, the secondary substance is 1O2, and small amounts of ·OH and O2·- are also produced. Less active material was produced as WSOC photoaging time increases. Furthermore, the WSOC in diesel particulate matter is more sensitive to light exposure compared to WSOC in gasoline particulate matter. The effects of common atmospheric ionic components on model phenol photodegradation were also explored. Whether WSOC of diesel particulate matter or WSOC of gasoline particulate matter, ammonium nitrate, ammonium sulfate, and ferric chloride promote degradation of model phenol, and copper sulfate inhibited model phenol degradation. However, a different trend emerged with the addition of sodium chloride, which promoted the degradation of model phenol in WSOC of diesel particulate matter and inhibited the degradation in WSOC of gasoline particulate matter.

Efficient extraction and formation mechanism of fulvic acid from lignite: Experimental and DFT studies

Enhancing the coal-based fulvic acid (FA) yield through the effect of oxidation methods was of great importance. However, the realization of an efficient and environmentally friendly method for the preparation of FA, along with understanding of its formation mechanism, remains imperative. Herein, coal-based FA was prepared by oxidizing lignite with H2O2 and NaOH/KOH. The experimental data showed that ML lignite was pickled with HCl, metal ions such as iron, aluminum, and calcium can be removed, and this lignite is used as raw material, the reaction time was 150 min, the reaction temperature was 50 °C, and the volume ratio of H2O2 (30%) to KOH (3 mol/L) was 1:1, the effect of H2O2 and KOH on FA extraction was the best. The coal-based FA yield could reach 60.49%. The addition of silicone defoaming agent during the experiment resulted in a significant diminished the presence of bubbles and prevent the production of CO2. A decrease in N2 content was detected by GC. The FTIR, XPS, Py-GC/MS and other characterization results showed that FA has more polar functional groups (-COOH, -OH), and it contains more O-CO structure. Consequently, a greater quantity of FA molecules is generated during the reaction process. Moreover, the partial Gibbs free energies during the formation process of coal-based FA were calculated by density-functional theory (DFT). The highest energy required for free radicals was found to be between 1.3 and 1.7 eV. This study would provide theoretical support for exploring the FA formation process and the promotion of lignite humification by adding H2O2 or alkali to lignite.

Compositional and optical characteristics of aqueous brown carbon and HULIS in the eastern Indo-Gangetic Plain using a coupled EEM PARAFAC, FT-IR and 1H NMR approach

This study provides insights into the fluorophoric composition of aqueous brown carbon (BrCaq) and chemically-separated humic-like substances (HULIS): neutral HULIS (HULIS-n; at pH = 7) and acidic HULIS (HULIS-a; at pH = 2) on a seasonal and day-night basis in the eastern Indo-Gangetic Plain (IGP), India. A coupled approach including excitation-emission matrix (EEM) fluorescence and parallel factor analysis (PARAFAC) model, Fourier-transformed infrared spectroscopy (FT-IR) and proton nuclear magnetic resonance (1H NMR) spectroscopy was employed to understand the links between structural, compositional and fluorophoric characteristics of BrCaq and HULIS fractions. HULIS fluorophores (HULISfluoro) with varying oxidation states transported from the northwest IGP were dominant during biomass burning seasons (post-monsoon and winter), while protein-like fluorophores (PRLISfluoro) from marine emissions showed large contributions during summer. HULIS-n moieties were mostly primary in nature with higher conjugation, while HULIS-a were associated with secondarily formed and aged species with a larger contribution from degradation products. A substantial presence of tyrosine-like proteins in both chemically-separated HULIS fractions indicated that atmospheric HULIS is not entirely humic or fulvic-like in the eastern IGP. Finally, the dominance of H-C-O groups across seasons suggested consistent fossil fuel signatures along with season-specific influence of photodegradable cellulose from marine organisms in the summer and biomass burning in the post-monsoon and winter.

Molecular-level transformations of biomass burning-derived water-soluble organic carbon during dark aqueous OH oxidation: Insights from absorption, fluorescence, high-performance size exclusion chromatography and high-resolution mass spectrometry analysis

Biomass burning (BB) releases large amounts of water-soluble organic carbon (WSOC), which would undergo heterogenous oxidation processes that induce transformations in both molecular structures and compositions within BB WSOC. This study designed an aqueous oxidation initiated by OH radicals in the absence of light for WSOC extracted from smoke particles generated by burning of corn straw and fir wood. The BB WSOC was comprehensively characterized using a combination of UV-visible spectra, excitation-emission matrix fluorescence in conjunction with parallel factor analysis (EEM-PARAFAC), high-performance size exclusion chromatography (HPSEC), and high-resolution mass spectrometry (HRMS) analyses. Over the course of oxidation, both chromophores and fluorophores exhibited gradual decreases. Moreover, EEM-PARAFAC revealed a preferential degradation of larger-sized protein-like/phenol-like organic matters, accompanied by the accumulation and/or formation of humic-like substances in aged BB WSOC. HPSEC analysis showed notable changes in molecular weight (MW) distributions for both types of BB WSOC during oxidation. Specifically, high MW species (>1 kDa) displayed a tendency to form along with oxidation, possibly attributed to the formation of assemblies via intermolecular weak forces. After oxidation, evidence of CHO compound degradation and enrichment/formation of CHON compounds was observed for both types of BB WSOC. Remarkably, the resistant, degraded and produced molecules for BB WSOC were dominated by CHO (38-73 %) and lignin-like molecules (41-47 %), suggesting diverse responses to oxidation within these two groups. Furthermore, polyphenols experienced selective degradation, while CHON, aliphatic and poly-aromatic molecules tended to form during the oxidation process for both types of BB WSOC. In summary, this study provides a comprehensive understanding of the molecular-level transformations undergone by BB WSOC during dark aqueous OH oxidation. The findings significantly contribute to our insights into atmospheric evolution of BB WSOC, thereby playing a crucial role in accurately assessing their effects within climate models and informing policy decisions.

Effects of aerosol water content and acidity on the light absorption of atmospheric humic-like substances in winter

Atmospheric humic-like substances (HULIS) could affect regional climate due to their strong light-absorbing capacity. Daily fine particulate matter (PM2.5) samples were collected from December 18, 2016 to January 8, 2017 at an urban site in Chongqing, Southwest China. The mean concentration of HULIS in terms of carbon (HULIS-C) was 6.4 ± 3.4 μg m-3, accounting for 72% of water-soluble organic carbon. The mass absorption efficiency at 365 nm (MAE365) and absorption Ångström index (AAE) of atmospheric HULIS were 2.8 ± 0.30 m2 g-1 C and 4.6 ± 0.37, respectively. Good correlations between the light absorption coefficients of HULIS at 365 nm (Abs365) and the concentrations of K+, elemental carbon, NO3-, and NH4+ were observed, with correlation coefficients higher than 0.83, indicating that biomass burning and secondary formation were potential sources of light-absorbing HULIS, as evidenced by abundant fluorescent components related to less-oxygenated HULIS. Comparing the changes in Abs365 values, concentrations of major water-soluble inorganic ions and carbonaceous compounds in PM2.5, and environmental factors during the clean and pollution periods, we found that extensive biomass burning during the pollution period contributed significantly to the increase of Abs365 values. Moreover, the aerosol pH during the pollution period was close to 4, and NO2 concentration and aerosol water content were about 1.6 and 2.7 times higher than those during the clean period, respectively, which were favorable to form secondary HULIS through aqueous phase reactions in the presence of high NOx, resulting in an evident increase in its light absorption. Knowledge generated from this study is critical for evaluating the regional radiative forcing of brown carbon in southwest China.

Research progress on the characteristics, sources, and environmental and potential health effects of water-soluble organic compounds in atmospheric particulate matter

Water-soluble organic compounds (WSOCs) have received extensive attention due to their indistinct chemical components, complex sources, negative environmental impact, and potential health effects. To the best of our knowledge, until now, there has been no comprehensive review focused on the research progress of WSOCs. This paper reviewed the studies on chemical constituent and characterization, distribution condition, sources, environmental impact, as well as the potential health effects of WSOCs in the past 13 years. Moreover, the main existing challenges and directions for the future research on WSOCs were discussed from several aspects. Because of the complex composition of WSOCs and many unknown individual components that have not been detected, there is still a need for the identification and quantification of WSOCs. As modern people spend more time in indoor environments, it is meaningful to fill the gaps in the component characteristics and sources of indoor WSOCs. In addition, although in vitro cell experiments have shown that WSOCs could induce cellular oxidative stress and trigger the inflammatory response, the corresponding mechanisms of action need to be further explored. The current population epidemiology research of WSOCs is missing. Prospectively, we propose to conduct a comprehensive and simultaneous analysis strategy for concentration screening, source apportionment, potential health effects, and action mechanisms of WSOCs based on high throughput omics coupled with machine learning simulation and prediction.

Evolution from basic to advanced structure of fulvic acid and humic acid prepared by food waste

Fulvic acid (FA) and humic acid (HA) are common polyacids in nature. However, the evolutionary process of their basic and advanced structures is still unclear. FA and HA were separated into five molecular weight components to investigate the process of evolution from small to large molecules. The primary structure analysis showed that FA were rich in CN, COOH and OH content, while HA were rich in (CH2)n, NH2 and CC. Moreover, with the molecular weight increasing, the structures could complement each other to maintain the hydrophilic or hydrophobic balance. The 2D-COS spectroscopy demonstrated that during the growth of FA, COOH, NH2 and OH firstly respond. On the other hand, during the growth of HA, NH2 and (CH2)n firstly respond. In addition, advanced structure of FA was affected by intramolecular hydrogen bonds and π - π interaction. HA was affected by hydrophobic interactions due to the abundance of hydrophobic groups, primarily (CH2)n and benzene rings. 3D conformational fitting and particle size characterization confirmed that the interaction forces determine that FA and HA become tightly and loosely molecules respectively. This study is to further explore the geochemical formation and evolution process of FA and HA molecules.

Compact fiber sensor for pH measurement based on the composite effect of hydrogel deformation and LC refractive index variation

A novel, to the best of our knowledge, type of compact pH fiber sensor combined with a hydrogel based on the whispering gallery mode (WGM) is proposed and integrates a liquid crystal (LC) microdroplet in a capillary in a compact structure as small as 180 µm. In the research, the hydrogel performs both as a supporting frame and a responsive material that causes morphological deformation of the LC microdroplet with pH variation. Moreover, a new phenomenon of pH-induced LC refractive index variation is observed and applied in the pH measurement, so that the acid itself can also lead the LC microdroplet structure transition. Thus, the WGM method is applied to detect the composite effect simultaneously to improve the sensing capability. The sensitivity of the sensor in the pH range from 4.55 to 6.86 reaches 3.19 nm/pH. The response time is short, within 60 s. The simple and compact structure of the sensor reduces the cost and enhances the stability, which is of great potential for biomedical pH measurement.

Highly Acidic Conditions Drastically Alter the Chemical Composition and Absorption Coefficient of α-Pinene Secondary Organic Aerosol

Secondary organic aerosols (SOA), formed through the gas-phase oxidation of volatile organic compounds (VOCs), can reside in the atmosphere for many days. The formation of SOA takes place rapidly within hours after VOC emissions, but SOA can undergo much slower physical and chemical processes throughout their lifetime in the atmosphere. The acidity of atmospheric aerosols spans a wide range, with the most acidic particles having negative pH values, which can promote acid-catalyzed reactions. The goal of this work is to elucidate poorly understood mechanisms and rates of acid-catalyzed aging of mixtures of representative SOA compounds. SOA were generated by the ozonolysis of α-pinene in a continuous flow reactor and then collected using a foil substrate. SOA samples were extracted and aged by exposure to varying concentrations of aqueous H₂SO₄ for 1-2 days. Chemical analysis of fresh and aged samples was conducted using ultra-performance liquid chromatography coupled with photodiode array spectrophotomety and high-resolution mass spectrometry. In addition, UV-vis spectrophotometry and fluorescence spectrophotometry were used to examine the changes in optical properties before and after aging. We observed that SOA that aged in moderately acidic conditions (pH from 0 to 4) experienced small changes in composition, while SOA that aged in a highly acidic environment (pH from -1 to 0) experienced more dramatic changes in composition, including the formation of compounds containing sulfur. Additionally, at highly acidic conditions, light-absorbing and fluorescent compounds appeared, but their identities could not be ascertained due to their small relative abundance. This study shows that acidity is a major driver of SOA aging, resulting in a large change in the chemical composition and optical properties of aerosols in regions where high concentrations of H₂SO₄ persist, such as upper troposphere and lower stratosphere.