Photocatalytic Oxidation for Volatile Organic Compounds Elimination: From Fundamental Research to Practical Applications

A Critical Review of Deep Oxidation of Gaseous Volatile Organic Compounds via Aqueous Advanced Oxidation Processes

Volatile organic compounds (VOCs) are considered to be the most recalcitrant gaseous pollutants due to their high toxicity, diversity, complexity, and stability. Gas-solid catalytic oxidation methods have been intensively studied for VOC treatment while being greatly hampered by energy consumption, catalyst deactivation, and byproduct formation. Recently, aqueous advanced oxidation processes (AOPs) have attracted increasing interest for the deep oxidation of VOCs at room temperature, owing to the generation of abundant reactive oxygen species (ROS). However, current reviews mainly focus on VOC degradation performance and have not clarified the specific reaction process, degradation products, and paths of VOCs in different AOPs. This study systematically reviews recent advances in the application of aqueous AOPs for gaseous VOC removal. First, the VOC gas-liquid mass transfer and chemical oxidation processes are presented. Second, the latest research progress of VOC removal by various ROS is reviewed to study their degradation performances, pathways, and mechanisms. Finally, the current challenges and future strategies are discussed from the perspectives of synergistic oxidation of VOC mixtures, accurate oxidation, and resource utilization of target VOCs via aqueous AOPs. This perspective provides the latest information and research inspiration for the future industrial application of aqueous AOPs for VOC waste gas treatment.

0.68% of solar-to-hydrogen efficiency and high photostability of organic-inorganic membrane catalyst

Solar-driven flat-panel H2O-to-H2 conversion is an important technology for value-added solar fuel production. However, most frequently used particulate photocatalysts are hard to achieve stable photocatalysis in flat-panel reaction module due to the influence of mechanical shear force. Herein, a highly active CdS@SiO2-Pt composite with rapid CdS-to-Pt electron transfer and restrained photoexciton recombination was prepared to process into an organic-inorganic membrane by compounding with polyvinylidene fluoride (PVDF). This PVDF networked organic-inorganic membrane displays high photostability and excellent operability, achieving improved simulated sunlight-driven alkaline H2O-to-H2 conversion activity (213.48 mmol m-2 h-1) following a 0.68% of solar-to-hydrogen efficiency. No obvious variation in its appearance and micromorphology was observed even being recycled for 50-times, which considerably outperforms the existing membrane photocatalysts. Subsequently, a homemade panel H2O-to-H2 conversion system was fabricated to obtain a 0.05% of solar-to-hydrogen efficiency. In this study, we opens up a prospect for practical application of photocatalysis technology.

Time-resolved spectroscopic investigation for the practical application of a photocatalytic air purifier

The photocatalytic efficiency for removing volatile organic compounds (VOCs) is significantly influenced by operational parameters like humidity and flow velocity, exhibiting notable and inconsistent fluctuations in both lab-scale and large-scale demonstrations. In this study, operando spectroscopy and isotope analysis were employed to investigate the correlation between humidity levels and degradation of gaseous acetaldehyde using TiO2 photocatalysts, aiming to demonstrate the scaling-up of photocatalytic air purifier. It was observed that rate constants for the mineralization of acetaldehyde rapidly decreased by 30% as relative humidity increased from 25% to 80% in the flow system (with an air velocity, v = 0.78 m/s). However, batch system showed smaller change with only a 10% reduction of the rate constant. Humidity fluctuations were more pronounced under high-speed conditions and were amplified in air purifier (v = 3.8 m/s). Time-resolved operando spectroscopy using an 13C isotope of acetaldehyde revealed that humidity's distinct role in dark adsorption and photocatalytic reactions. Water was found to inhibit the formation of crotonaldehyde during aldol condensation reaction in dark condition. Moreover, water suppressed photocatalytic mineralization by inhibiting acetate oxidation to formate. These findings provide valuable insights for improving realistic air purification processes, underscoring the importance of identifying key intermediates and controlling humidity to enhance the selectivity of gaseous pollutant oxidation reactions.

A comprehensive review and perspective research in technology integration for the treatment of gaseous volatile organic compounds

Volatile organic compounds (VOCs) are harmful pollutants emitted from industrial processes. They pose a risk to human health and ecosystems, even at low concentrations. Controlling VOCs is crucial for good air quality. This review aims to provide a comprehensive understanding of the various methods used for controlling VOC abatement. The advancement of mono-functional treatment techniques, including recovery such as absorption, adsorption, condensation, and membrane separation, and destruction-based methods such as natural degradation methods, advanced oxidation processes, and reduction methods were discussed. Among these methods, advanced oxidation processes are considered the most effective for removing toxic VOCs, despite some drawbacks such as costly chemicals, rigorous reaction conditions, and the formation of secondary chemicals. Standalone technologies are generally not sufficient and do not perform satisfactorily for the removal of hazardous air pollutants due to the generation of innocuous end products. However, every integration technique complements superiority and overcomes the challenges of standalone technologies. For instance, by using catalytic oxidation, catalytic ozonation, non-thermal plasma, and photocatalysis pretreatments, the amount of bioaerosols released from the bioreactor can be significantly reduced, leading to effective conversion rates for non-polar compounds, and opening new perspectives towards promising techniques with countless benefits. Interestingly, the three-stage processes have shown efficient decomposition performance for polar VOCs, excellent recoverability for nonpolar VOCs, and promising potential applications in atmospheric purification. Furthermore, the review also reports on the evolution of mathematical and artificial neural network modeling for VOC removal performance. The article critically analyzes the synergistic effects and advantages of integration. The authors hope that this article will be helpful in deciding on the appropriate strategy for controlling interested VOCs.

Spatial interfacial heterojunctions of TiO2 for photocatalytic degradation of toluene: Effects of interface amorphous region and oxygen vacancy

The catalytic activity of TiO2 is contingent upon its crystal structure and the optoelectronic properties associated with defects. In this study, a one-step method was used to synthesize TiO2 with a spatial interface of rutile/anatase phases, and a simple thermal annealing process was applied to optimize the amorphous regions and oxygen vacancies at the interface between the rutile and anatase phases of TiO2. High-resolution transmission electron microscopy (HRTEM) elucidates the evolution process of the amorphous domain at the interface, skillfully introducing oxygen vacancies at the heterojunction interface by modulating the amorphous domain. The obtained photocatalyst (TiO2-350 °C) after annealing exhibits an optimal interface structure, with its photocatalytic activity and stability in degrading toluene far superior to P25. Photocurrent and photoluminescence (PL) measurements affirm that the existence of interfacial oxygen vacancies heightens the efficiency of electron transfer at the interface, while surface oxygen vacancies significantly enhance the stability and mineralization rate of toluene degradation. The improved photocatalytic properties were attributed to the combined effects of surface/interface oxygen vacancies and spatial interface heterojunctions. The one-step synthesis method developed in this work provides a novel perspective on combining spatially interfaced anatase/rutile phases with surface/interfacial oxygen vacancies.

Defects materials of Institut Lavoisier-125(Ti) materials enhanced photocatalytic activity for toluene and chlorobenzene mixtures degradation: Mechanism study

In this paper, the effect of three monocarboxylic acids on MIL-125 synthesis was systematically investigated and the results were discussed in detail. X-ray diffractometry (XRD) and nitrogen adsorption-desorption curves indicated that small molecule acids (acetic acid, propionic acid and butyric acid) affected the morphology of MIL-125 and induced lamellar pores and structural defects in the crystals. Thermogravimetric measurements confirmed the presence of acid-regulated defective metal-organic frameworks (MOFs). Electrochemical tests and density function theory calculations indicated that acid modulation could change the forbidden bandwidth of the material. The acid modification strategy effectively promoted the transfer of photogenerated electrons and enhanced the adsorption and activation of O2 and H2O molecules, generating reactive radicals. The modified MOFs also showed excellent performance in the removal of mixed toluene and chlorobenzene. The degradation pathways of the mixture were analyzed by in situ infrared (IR) and gas chromatography-mass spectrometry (GC-MS). The mixture was converted to chlorophenolic intermediates in the presence of reactive oxygen species, further decomposed to form ethers and ethanol, and finally formed small molecules such as carbon dioxide and water. A feasible method was provided for the preparation of photocatalysts for the treatment of mixed VOCs.

Water-Resistance-Based S-Scheme Heterojunction for Deep Mineralization of Toluene

Deep mineralization of low concentration toluene (C7 H8 ) is one of the most significant but challenging reactions in photocatalysis. It is generally assumed that hydroxyl radicals (⋅OH) as the main reactive species contribute to the enhanced photoactivity, however, it remains ambiguous at this stage. Herein, a S-scheme ZnSn(OH)6 -based heterojunction with AlOOH as water resistant surface layer is in situ designed for tuning the free radical species and achieving deep mineralization of C7 H8 . By employing a combination of in situ DRIFTS and materials characterization techniques, we discover that the dominant intermediates such as benzaldehyde and benzoic acid instead of toxic phenols are formed under the action of holes (h+ ) and superoxide radicals (⋅O2 - ). These dominant intermediates turn out to greatly decrease the ring-opening reaction barrier. This study offers new possibilities for rationally tailoring the active species and thus directionally producing dominant intermediates via designing water resistant surface layer.

Surface Hydroxyl and Oxygen Vacancies Engineering in ZnSnAl LDH: Synergistic Promotion of Photocatalytic Oxidation of Aromatic VOCs

Photocatalytic oxidation has gained great interest in environmental remediation, but it is still limited by its low efficiency and catalytic deactivation in the degradation of aromatic VOCs. In this study, we concurrently regulated the surface hydroxyl and oxygen vacancies by introducing Al into ZnSn layered double hydroxide (LDH). The presence of distorted Al species induced local charge redistribution, leading to the remarkable formation of oxygen vacancies. These oxygen vacancies subsequently increased the amount of surface hydroxyl and elongated its bond length. The synergistic effects of surface hydroxyl and oxygen vacancies greatly enhanced reactant adsorption-activation and facilitated charge transfer to generate •OH, •O2-, and 1O2, resulting in highly efficient oxidation and ring-opening of various aromatic VOCs. Compared with commercial TiO2, the optimized ZnSnAl-50 catalyst exhibited about 2-fold activity for the toluene and styrene degradation and 10-fold activity for the chlorobenzene degradation. Moreover, ZnSnAl-50 demonstrated exceptional stability in the photocatalytic oxidation of toluene under a wide humidity range of 0-75%. This work marvelously improves the photocatalytic efficiency, stability, and adaptability through a novel strategy of surface hydroxyl and oxygen vacancies engineering.

Construction of CdS@g-C3N4 heterojunction photocatalyst for highly efficient degradation of gaseous toluene

Exploring efficient photocatalysts for the degradation of VOCs under visible light is a challenge. CdS@g-C3N4 heterojunction photocatalytic materials were developed in this study using a microwave-assisted sol-gel process. CdS@g-C3N4(0.2) photocatalyzed the maximum degradation of gaseous toluene under visible light irradiation, and the time required to achieve the same degradation rate was reduced by 270 min when compared to pure CdS. The morphological characterization, photoelectric property analysis, and DFT calculations all verified that the CdS nanoparticles were uniformly disseminated on the surface of g-C3N4, and that the interfaces were closely contacted to form a heterojunction interface with a built-in field. This enhances charge transfer from CdS to g-C3N4 while successfully decreasing electron-hole pair recombination caused by light. Furthermore, the energy band structure was altered to absorb longer wavelengths of light and extend the absorption spectral range, improving the photocatalytic material's efficacy for broad-spectrum light such as sunshine. This paper proposes methods for predicting and optimizing the surface structure of catalysts, as well as developing high-performance multi-heterojunction photocatalysts for the degradation of indoor VOCs.

Photodriven Methane Conversion on Transition Metal Oxide Catalyst: Recent Progress and Prospects

Methane as the main component in natural gas is a promising chemical raw material for synthesizing value-added chemicals, but its harsh chemical conversion process often causes severe energy and environment concerns. Photocatalysis provides an attractive path to active and convert methane into various products under mild conditions with clean and sustainable solar energy, although many challenges remain at present. In this review, recent advances in photocatalytic methane conversion are systematically summarized. As the basis of methane conversion, the activation of methane is first elucidated from the structural basis and activation path of methane molecules. The study is committed to categorizing and elucidating the research progress and the laws of the intricate methane conversion reactions according to the target products, including photocatalytic methane partial oxidation, reforming, coupling, combustion, and functionalization. Advanced photocatalytic reactor designs are also designed to enrich the options and reliability of photocatalytic methane conversion performance evaluation. The challenges and prospects of photocatalytic methane conversion are also discussed, which in turn offers guidelines for methane-conversion-related photocatalyst exploration, reaction mechanism investigation, and advanced photoreactor design.

Dual function of H2O on interfacial intermediate conversion and surface poisoning regulation in simultaneous photodegradation of NO and toluene

Co-existing air pollutants, especially NOx and VOCs, will generate secondary photochemical pollution under light irradiation. However, simultaneous elimination of multi-pollutants has long been a challenge. Photocatalysis could turn the reaction pathway between pollutants to convert them into harmless products, which is a promising technology for multi-pollutant control. Here we achieved synergistic photocatalytic degradation of NO and C7H8 on InOOH photocatalyst, and the performance can be adjusted by H2O through affecting the interaction between surface species and catalyst. In situ DRIFTS and GC-MS revealed that the improved efficiency originated from the fast conversion of C-N coupling intermediates led by additional H2O. Surface characterizations and DFT simulation determined that accumulated nitrates will compete with the adsorption of NO and C7H8, resulting in a decline in efficiency in the later stage. Although improved efficiency would bring more nitrates, as H2O has comparable adsorption to nitrate at the same site, high humidity can mitigate the deactivation. The photocatalyst can be also simply regenerated by water washing. This work reveals the complex interaction in the multi-pollutant system and provides guidelines for precisely regulating the synergistic removal of NOx and VOCs.

A new attempt to control volatile organic compounds (VOCs) pollution - Modification technology of biomass for adsorption of VOCs gas

The detrimental impact of volatile organic compounds on the surroundings is widely acknowledged, and effective solutions must be sought to mitigate their pollution. Adsorption treatment is a cost-effective, energy-saving, and flexible solution that has gained popularity. Biomass is an inexpensive, naturally porous material with exceptional adsorbent properties. This article examines current research on volatile organic compounds adsorption using biomass, including the composition of these compounds and the physical (van der Waals) and chemical mechanisms (Chemical bonding) by which porous materials adsorb them. Specifically, the strategic modification of the surface chemical functional groups and pore structure is explored to facilitate optimal adsorption, including pyrolysis, activation, heteroatom doping and other methods. It is worth noting that biomass adsorbents are emerging as a highly promising strategy for green treatment of volatile organic compounds pollution in the future. Overall, the findings signify that biomass modification represents a viable and competent approach for eliminating volatile organic compounds from the environment.