Quantification of waterborne pathogens and associated health risks in urban water

Influence of combined abiotic/biotic factors on decay of P. aeruginosa and E. coli in Rhine River water

Understanding the dynamic change in abundance of both fecal and opportunistic waterborne pathogens in urban surface water under different abiotic and biotic factors helps the prediction of microbiological water quality and protection of public health during recreational activities, such as swimming. However, a comprehensive understanding of the interaction among various factors on pathogen behavior in surface water is missing. In this study, the effect of salinity, light, and temperature and the presence of indigenous microbiota, on the decay/persistence of Escherichia coli and Pseudomonas aeruginosa in Rhine River water were tested during 7 days of incubation with varying salinity (0.4, 5.4, 9.4, and 15.4 ppt), with light under a light/dark regime (light/dark) and without light (dark), temperature (3, 12, and 20 °C), and presence/absence of indigenous microbiota. The results demonstrated that light, indigenous microbiota, and temperature significantly impacted the decay of E. coli. Moreover, a significant (p<0.01) four-factor interactive impact of these four environmental conditions on E. coli decay was observed. However, for P. aeruginosa, temperature and indigenous microbiota were two determinate factors on the decay or growth. A significant three-factor interactive impact between indigenous microbiota, temperature, and salinity (p<0.01); indigenous microbiota, light, and temperature (p<0.01); and light, temperature, and salinity (p<0.05) on the decay of P. aeruginosa was found. Due to these interactive effects, caution should be taken when predicting decay/persistence of E. coli and P. aeruginosa in surface water based on a single environmental condition. In addition, the different response of E. coli and P. aeruginosa to the environmental conditions highlights that E. coli monitoring alone underestimates health risks of surface water by non-fecal opportunistic pathogens, such as P. aeruginosa. KEY POINTS: Abiotic and biotic factors interactively affect decay of E. coli and P. aeruginosa E.coli and P.aeruginosa behave significantly different under the given conditions Only E. coli as an indicator underestimates the microbiological water quality.

Occurrence, transmission and risks assessment of pathogens in aquatic environments accessible to humans

Pathogens are ubiquitously detected in various natural and engineered water systems, posing potential threats to public health. However, it remains unclear which human-accessible waters are hotspots for pathogens, how pathogens transmit to these waters, and what level of health risk associated with pathogens in these environments. This review collaboratively focuses and summarizes the contamination levels of pathogens on the 5 water systems accessible to humans (natural water, drinking water, recreational water, wastewater, and reclaimed water). Then, we showcase the pathways, influencing factors and simulation models of pathogens transmission and survival. Further, we compare the health risk levels of various pathogens through Quantitative Microbial Risk Assessment (QMRA), and assess the limitations of water-associated QMRA application. Pathogen levels in wastewater are consistently higher than in other water systems, with no significant variation for Cryptosporidium spp. among five water systems. Hydraulic conditions primarily govern the transmission of pathogens into human-accessible waters, while environmental factors such as temperature impact pathogens survival. The median and mean values of computed public health risk levels posed by pathogens consistently surpass safety thresholds, particularly in the context of recreational waters. Despite the highest pathogens levels found in wastewater, the calculated health risk is significantly lower than in other water systems. Except pathogens concentration, variables like the exposure mode, extent, and frequency are also crucial factors influencing the public health risk in water systems. This review shares valuable insights to the more accurate assessment and comprehensive management of public health risk in human-accessible water environments.

Improvement and application of qPCR assay revealed new insight on early warning of Phaeocystis globosa bloom

Phaeocystis globosa bloom develops from its early solitary cells, providing clues for early warning of its bloom and timely responding to possible consequences. However, the early prediction requires quantification of the solitary cells for a thorough understanding of bloom formation. Therefore, we developed an accurate, sensitive, and specific qPCR assay for this need. Results show that the accuracy of qPCR was significantly enhanced by ameliorating DNA barcode design, improving genomic DNA extraction, and introducing a strategy of internal amplification control (IAC). This approach reached a quantification limit of 1 cell/reaction, making low-abundance cells (10¹-10³ cells/L) detection possible, and we also observed a plunge in the abundance of the solitary cells before the bloom outbreak in two winters in 2019 and 2020 for the first time, which is quite unique from laboratory results showing an increase instead. The plunge in solitary-cell abundance might be associated with the attachment of solitary cells to solid matrices to form non-solitary attached aggregate, the precursor of colonies, which gains supports from other studies and needs more investigations in the future. Therefore, as the plunge in solitary-cell abundance is a sign of colony formation, it can be used as an early warning indicator to P. globosa bloom.

Insights into effects of algae on decay and distribution of bacterial pathogens in recreational water: Implications for microbial risk management

The decay and distribution of bacterial pathogens in water is an important information for the health risk assessment to guide water safety management, and suspended algae might affect bacterial pathogens in water. This study established microcosms to investigate the effects of algae-related factors on the representative indicators and opportunistic pathogen species in water. We found that suspended algae increased the persistence of targeted species by 1-2 orders of magnitude of concentrations compared to microcosms without algae; and the effect of algae on microbial survival was affected by water nutrient levels (i.e., carbon, nitrogen and phosphorus), as the increased microbial persistence were correlated to the increased algae concentrations with more nutrient supplies. Moreover, decay and distribution profiles of representative species were determined. The three opportunistic pathogen species (Pseudomonas aeruginosa, Aeromonas hydrophila and Staphylococcus aureus) showed lower decay rates (0.82-0.98/day, 0.76-0.98/day, 0.63-0.87/day) largely affected by algae-related factors, while the enteric species (Escherichia coli and Enterococcus faecalis) had higher decay rates (0.94-1.31/day, 0.89-1.21/day) with little association with algae, indicating the propensity for attachment to algae is an important parameter in microbial fate. Together results suggest suspended algae played an evident role in the decay and distribution of bacterial pathogens, providing important implications regarding microbial safety in recreational water.

Distribution characteristics of antibiotic resistance bacteria and related genes in urban recreational lakes replenished by different supplementary water source

The distribution characteristics of antibiotic-resistant bacteria (ARB) and antibiotic resistance genes (ARGs) in urban recreational water from different water-supply sources might be different. In this study, water samples were collected to detect the antibiotic resistance of heterotrophic bacteria to five antibiotics, and the content, phenotype, gene type and species distribution of resistant bacteria were analyzed. The results showed that the changes of bacteria resistance rate in two lakes to five kinds of antibiotics were synchronous with time, and it would reach its maximum in autumn. The detection of ARGs and int I in 80 resistance strains showed that the detection rate of tetG, tetA and int I was high. Here, 51.25% of the bacteria were doubly resistant to AMP-CTX. The 80 isolate strains were of nine genera and 19 species, among which Bacillus cereus, Escherichia coli, Aeromonas veronii, Aeromonas caviae and Raoultella ornithinolytica were the common ARB species in two lakes. Correlation analysis showed that the water temperature was significantly correlated with the content of ARB in sulfamethoxazole (SMZ) and cefotaxime (CTX) (p < 0.05), and the total phosphorus (TP) in FQ lake was significantly correlated with the content of AMP-resistant bacteria (p < 0.05), while there were no other correlations between the changes of other water quality indexes and the content of ARB (p > 0.05).

Evaluating the potential for exposure to organisms of public health concern in naturally occurring bathing waters in Europe: A scoping review

Globally, water-based bathing pastimes are important for both mental and physical health. However, exposure to waterborne organisms could present a substantial public health issue. Bathing waters are shown to contribute to the transmission of illness and disease and represent a reservoir and pathway for the dissemination of antimicrobial resistant (AMR) organisms. Current bathing water quality regulations focus on enumeration of faecal indicator organisms and are not designed for detection of specific waterborne organisms of public health concern (WOPHC), such as antimicrobial resistant (AMR)/pathogenic bacteria, or viruses. This investigation presents the first scoping review of the occurrence of waterborne organisms of public health concern (WOPHC) in identified natural bathing waters across the European Union (EU), which aimed to critically evaluate the potential risk of human exposure and to assess the appropriateness of the current EU bathing water regulations for the protection of public health. Accordingly, this review sought to identify and synthesise all literature pertaining to a selection of bacterial (Campylobacter spp., Escherichia coli, Salmonella spp., Shigella spp., Vibrio spp., Pseudomonas spp., AMR bacteria), viral (Hepatitis spp., enteroviruses, rotavirus, adenovirus, norovirus), and protozoan (Giardia spp., and Cryptosporidium spp.) contaminants in EU bathing waters. Sixty investigations were identified as eligible for inclusion and data was extracted. Peer-reviewed investigations included were from 18 countries across the EU, totalling 87 investigations across a period of 35 years, with 30% published between 2011 and 2015. A variety of water bodies were identified, with 27 investigations exclusively assessing coastal waters. Waterborne organisms were classified into three categories; bacteria, viruses, and protozoa; amounting to 58%, 36% and 17% of the total investigations, respectively. The total number of samples across all investigations was 8,118, with detection of one or more organisms in 2,449 (30%) of these. Viruses were detected in 1281 (52%) of all samples where WOPHC were found, followed by bacteria (865(35%)) and protozoa (303(12%)). Where assessed (442 samples), AMR bacteria had a 47% detection rate, emphasising their widespread occurrence in bathing waters. Results of this scoping review highlight the potential public health risk of exposure to WOPHC in bathing waters that normally remain undetected within the current monitoring parameters.

Ultrasensitive and Low-Cost Paper-Based Graphene Oxide Nanobiosensor for Monitoring Water-Borne Bacterial Contamination

Water-borne pathogens are mostly generated due to poor sanitation, industrial effluents, and sewage sludge, leading to a significant increase in mortality rate. To prevent this, we need a simple, user-friendly, and rapid on-site detection tool of pathogens, i.e., a biosensor. As contaminated water mainly contains (80%) coliform bacteria, of which Escherichia coli is the major species, we have developed a screen-printed paper-based, label-free biosensor for the detection of E. coli in water. A nanoarchitectured graphene oxide (GO), as a fast electron-transfer flatland, was deposited on the screen-printed graphene (G) on a hydrophobic paper, followed by the immobilization of lectin Concanavalin A (ConA) as a biorecognition element for a GGO_ConA-biosensing electrode. The electrochemical characterization of GGO_ConA shows fast electron transfer with a calculated electroactive surface area of 0.16 cm². The biosensor performance was tested in the sludge water and beach water (real sample) as an analyte using the electrochemical impedance spectroscopy (EIS) technique. The charge-transfer resistance (R_ct) of GGO_ConA increases linearly with the bacterial concentration in the range of 10-10⁸ CFU mL^-1 with an estimated limit of detection (LOD) of 10 CFU mL^-1, which indicates the ultrasensitivity of our biosensor, with 100 times more sensitivity than previous studies. Our reported biosensor, being cost-effective, eco-friendly, and ultrasensitive, may serve greatly as a portable monitoring kit for checking water-borne bacterial contamination.

The effect of environmental conditions on the occurrence of Campylobacter jejuni and Campylobacter coli in wastewater and surface waters

Aims

The purpose of the study was to evaluate the occurrence of Campylobacter jejuni and Campylobacter coli in the aquatic environment based on the water origin, seasonality and physico‐chemical properties.

Methods and Results

The occurrence of C. jejuni and C. coli was determined in waste (29) or surface (56) waters in four different seasons. The air and water temperatures were measured during sampling and chemical analyses of water samples for ammonium, chloride, chlorine, nitrite, nitrate, phosphate and iron were performed. The thermotolerant Campylobacter spp. were more frequently detected in wastewater (59%; 17 positive samples) compared to surface water (38%; 21 positive samples), with the highest rate in autumn (67% of samples positive) and with a higher C. coli occurrence than C. jejuni (31% vs. 26%). Ammonium (above 0.2 mg/L) and chloride ion concentrations (above 60 mg/L) favour C. jejuni. Similarly, C. coli occurrence in water was supported by ammonium (above 0.2 mg/L), chloride (above 60 mg/L) and in addition by phosphate ion concentrations (below 0.7 mg/L).

Conclusions

Campylobacter presence in water is influenced by physico‐chemical parameters such as concentrations of ammonium and chloride ions.

Significance and Impact of the Study

Water environment is an alternative source of Campylobacter. The concentration of ammonium and chloride ions can be used as a basis for successful prediction of the potential occurrence of C. jejuni and C. coli in wastewater and surface water in future.

A Rapid Culture Method for the Detection of Campylobacter from Water Environments

The natural environment and water are among the sources of Campylobacter jejuni and Campylobacter coli. A limited number of protocols exist for the isolation of campylobacters in poorly filterable water. Therefore, the goal of our work was to find a more efficient method of Campylobacter isolation and detection from wastewater and surface water than the ISO standard. In the novel rapid culture method presented here, samples are centrifuged at high speed, and the resuspended pellet is inoculated on a filter, which is placed on Campylobacter selective mCCDA agar. The motile bacteria pass through the filter pores, and mCCDA agar suppresses the growth of background microbiota on behalf of campylobacters. This culture-based method is more efficient for the detection and isolation of Campylobacter jejuni and Campylobacter coli from poorly filterable water than the ISO 17995 standard. It also is less time-consuming, taking only 72 h and comprising three steps, while the ISO standard method requires five or six steps and 144-192 h. This novel culture method, based on high-speed centrifugation, bacterial motility, and selective cultivation conditions, can be used for the detection and isolation of various bacteria from water samples.

Dynamic Aqueous Multiphase Reaction System for One-Pot CRISPR-Cas12a-Based Ultrasensitive and Quantitative Molecular Diagnosis

Recently, CRISPR-Cas technology has opened a new era of nucleic acid-based molecular diagnostics. However, current CRISPR-Cas-based nucleic acid biosensing has a lack of the quantitative detection ability and typically requires separate manual operations. Herein, we reported a dynamic aqueous multiphase reaction (DAMR) system for simple, sensitive and quantitative one-pot CRISPR-Cas12a based molecular diagnosis by taking advantage of density difference of sucrose concentration. In the DAMR system, recombinase polymerase amplification (RPA) and CRISPR-Cas12a derived fluorescent detection occurred in spatially separated but connected aqueous phases. Our DAMR system was utilized to quantitatively detect human papillomavirus (HPV) 16 and 18 DNAs with sensitivities of 10 and 100 copies within less than 1 h. Multiplex detection of HPV16/18 in clinical human swab samples were successfully achieved in the DAMR system using 3D-printed microfluidic device. Furthermore, we demonstrated that target DNA in real human plasma samples can be directly amplified and detected in the DAMR system without complicated sample pretreatment. As demonstrated, the DAMR system has shown great potential for development of next-generation point-of-care molecular diagnostics.

Membrane-sensitive bacterial DNA extractions and absolute quantitation of recovery efficiencies

Absolute quantification of waterborne pathogens is mandatory for microbiological risk assessment (MRA). Determination of the DNA recovery efficiency is an essential step before the quantitative molecular measurements, which has been largely ignored. In this study, we compared the DNA recovery efficiency and quality of five extraction methods, including two modified phenol-chloroform-based extractions with mechanical shearing and three commercial kits for the extraction of DNA from indigenous mixed-bacteria culture of river water. All of the methods gave relatively satisfying results from the pelleted sample through centrifugation. However, the commercial kits provided surprisingly low DNA yields for membrane-filtered samples because of DNA trapping and/or absorption on the membrane. Integrating with enzymatic lysis, bath sonication, phenol extraction, and alcohol precipitation achieved highest DNA yields and an acceptable DNA integrity for quantitative PCR. A plasmid containing the human GADPH gene fragment was demonstrated to be a suitable spiking control for determining the absolute DNA recovery efficiency. The unexpectedly low efficiencies of commercial kit extractions imply the significant underestimation of pathogenic bacteria in previous studies, which should gain enough concern in the area of pathogen monitoring in the future.

Quantitative microbial risk assessment of Legionella pneumophila in a drinking water supply system in Israel

Legionella pneumophila cause human infections via inhalation of contaminated water aerosols, resulting in severe pneumonia. Legionella spp. prevalence was monitored in a drinking-water distribution system (DWDS) in Northern Israel. Five points (toilet faucets and showers) were sampled seasonally along a three years period. Toilet faucets and shower use, both generating aerosols, are known transmission routes for this pathogen and thus, present a potential health risk. Quantitative Microbial Risk Assessment (QMRA) was applied in order to assess the health risks posed by Legionella for these two exposure scenarios, while considering Legionella seasonality. The obtained results were compared with estimated tolerable risk levels of infection and of disease set by the USEPA and WHO. Both limits were expressed as Disability-Adjusted Life Years index (DALY) being 1 × 10^-4 and 1 × 10^-6, respectively. The QMRA revealed that the annual risk levels for both faucets and showers use exceeded the acceptable risk of infection with an average of 5.52 × 10^-4 and 2.37 × 10^-3 DALY'S per person per year, respectively. Annual risk levels were stable with no significant differences between the three years. Risk levels varied significantly between seasons by up to three orders of magnitude. Risk levels were highest during summer, autumn, and lowest during winter. The highest seasonal infection risk values were found in summer for both faucets and showers, which corresponded to 8.09 × 10^-4 and 2.75 × 10^-3 DALY'S per person per year, respectively. In conclusion, during summer and autumn there is a significant increase of the infection risk associated with exposure to Legionella-contaminated aerosols, in the studied water system. Public health assessment and prevention measures should focus on these seasons.

Diversity and abundance of bacterial pathogens in urban rivers impacted by domestic sewage

In developing countries, many urban rivers are suffering from heavy contamination by untreated sewage, which implies great microbial risks. However, information regarding the bacterial pathogen diversity and distribution in urban rivers is highly limited. In this study, 41 water samples of fifteen rivers and eight samples from two sewage treatment plants in Changzhou City of Yangtze River Delta were sampled. Next-generation sequencing and a self-built reference pathogen database were used to investigate the diversity of enteric and environmental pathogens. The results indicated that the studied urban rivers were harboring diverse potential pathogen species, which primarily included enteric pathogens in Arcobacter and Bacteroides, and environmental pathogens in Acinetobacter, Aeromonas and Pseudomonas. Quantification of twelve pathogens/indicators of interest by qPCR showed that Escherichia coli, Enterococcus faecalis, Campylobacter jejuni, Arcobacter cryaerophilus, Acinetobacter johnsonii, Acinetobacter lwoffii and Aeromonas spp. were abundant, with median values ranging from 3.30 to 5.85 log₁₀ copies/100 mL, while Salmonella, Legionella pheumophila, Mycobacterium avium, Pseudomonas aeruginosa and Staphylococcus aureus were infrequently quantified. The pollution of nutrients and human intestinal microorganisms indicated by specific markers were found to be prevalent but with different levels in the rivers. The correlation analyses revealed that the diversity (p < 0.01) and concentrations (p < 0.05) of the enteric pathogens highly correlated to the human fecal marker abundances, which indicated that the enteric pathogens in the urban rivers were likely to have originated from domestic sewage. The environmental pathogens, which are different from the enteric ones, showed various distribution patterns, and some of them were more abundant in the rivers of rich nutrient. Our findings provide a comprehensive understanding of the bacterial pathogen distribution and influencing factors in urban rivers that are impacted by domestic sewage, thereby establishing the foundation for urban water management.

Occurrence of antibiotic resistance genes and bacterial pathogens in water and sediment in urban recreational water

The emergence and prevalence of antibiotic resistance genes (ARGs) and pathogens in the environment are serious global health concern. However, information about the occurrence of ARGs and pathogens in recreational water is still limited. Accordingly, we investigated the occurrence of six ARGs and human pathogens in three recreational lakes, and the correlations between ARGs and one mobile genetic element (intI1) were analyzed. The quantitative PCR results showed that the concentration of ARGs ranged from 4.58 × 10⁰ to 5.0 × 10⁵ copies/mL in water and from 5.78 × 10³ to 5.89 × 10⁸ copies/g dry weight (dw) in sediment. Sul1 exhibited the highest level among the five quantifiable ARGs. The concentrations of sul1, bla_-TEM, and tetX exhibited significant positive correlations with intI1 (p < 0.05), indicating that intI1 may be involved in their proliferation. The detection frequencies of ARGs ranged from 75%-100%, indicating the prevalence of these risks in this region. The concentration of Escherichia coli, Aeromonas spp., Mycobacterium avium, Pseudomonas aeruginosa, and Salmonella enterica ranged from 10³ to 10⁵ copies/100 mL in water and 10⁴-10⁶ copies/g dw in sediment. In total, 25% of the samples harbored all pathogen genes, indicating the prevalence of these pathogens in recreational lakes. Furthermore, the next-generation sequencing results showed that 68 genera of pathogens were present, among which Aeromonas, Mycobacterium, and Pseudomonas were the dominant ones in this region, posing a considerable potential health risk to public health. Overall, the widespread distribution of ARGs and pathogens underscores the need to better monitor and mitigate their propagation in recreational lakes and the associated risks to human health.

Variation of bacterioplankton community along an urban river impacted by touristic city: With a focus on pathogen

Bacterioplankton communities play a critical role in ecological processes in river systems, and shifts of their composition may impact microbial levels and raise public health concerns. The aim of this study was to comprehensively analyze the essential factors influencing bacterioplankton community, along with pathogen, and to estimate the health risk caused by the pathogens downstream of the Liushahe River, which is located in the famous touristic city Xishuangbanna. Results showed that wastewater treatment plants (WWTPs) and a subtropical recreational park impacted the bacterioplankton community and pathogen population, and potential pathogen identification demonstrated that 76 of 145 reference genera were present in the river. Moreover, the bacterioplankton community and pathogen were differently impacted by environmental gradients, and SRP, NO₂ and pH were main factors influencing bacterioplankton community while pathogen population was highly correlated with temperature and turbidity. In addition, it is noted that the pathogen population was dominated by bacterioplankton community and this might because the capacity of resistance invasion pathogen was determined by of bacterioplankton community diversity. Therefore, bacterioplankton community diversity can be used to control and predict the amount of pathogens. Quantitative microbial risk assessment (QMRA) also revealed that the infection risks of Escherichia coli (E. coli), Mycobacterium avium (M. avium), and Pseudomonas aeruginosa (P. aeruginosa) during five recreational activities, especially water-based activities in the touristic city, were greater than that in natural areas and mostly exceeded the U.S. EPA risk limit for recreational activities. Our study offered the first insight into the potential relationship between the bacterioplankton community and bacterial pathogens within a touristic river.

Relationships between Microbial Indicators and Pathogens in Recreational Water Settings

Fecal pollution of recreational waters can cause scenic blight and pose a threat to public health, resulting in beach advisories and closures. Fecal indicator bacteria (total and fecal coliforms, Escherichia coli, and enterococci), and alternative indicators of fecal pollution (Clostridium perfringens and bacteriophages) are routinely used in the assessment of sanitary quality of recreational waters. However, fecal indicator bacteria (FIB), and alternative indicators are found in the gastrointestinal tract of humans, and many other animals and therefore are considered general indicators of fecal pollution. As such, there is room for improvement in terms of their use for informing risk assessment and remediation strategies. Microbial source tracking (MST) genetic markers are closely associated with animal hosts and are used to identify fecal pollution sources. In this review, we examine 73 papers generated over 40 years that reported the relationship between at least one indicator and one pathogen group or species. Nearly half of the reports did not include statistical analysis, while the remainder were almost equally split between those that observed statistically significant relationships and those that did not. Statistical significance was reported less frequently in marine and brackish waters compared to freshwater, and the number of statistically significant relationships was considerably higher in freshwater (p < 0.0001). Overall, significant relationships were more commonly reported between FIB and pathogenic bacteria or protozoa, compared to pathogenic viruses (p: 0.0022⁻0.0005), and this was more pronounced in freshwater compared to marine. Statistically significant relationships were typically noted following wet weather events and at sites known to be impacted by recent fecal pollution. Among the studies that reported frequency of detection, FIB were detected most consistently, followed by alternative indicators. MST markers and the three pathogen groups were detected least frequently. This trend was mirrored by reported concentrations for each group of organisms (FIB > alternative indicators > MST markers > pathogens). Thus, while FIB, alternative indicators, and MST markers continue to be suitable indicators of fecal pollution, their relationship with waterborne pathogens, particularly viruses, is tenuous at best and influenced by many different factors such as frequency of detection, variable shedding rates, differential fate and transport characteristics, as well as a broad range of site-specific factors such as the potential for the presence of a complex mixture of multiple sources of fecal contamination and pathogens.

Aquatic Bacterial Communities Associated With Land Use and Environmental Factors in Agricultural Landscapes Using a Metabarcoding Approach

This study applied a 16S rRNA gene metabarcoding approach to characterize bacterial community compositional and functional attributes for surface water samples collected within, primarily, agriculturally dominated watersheds in Ontario and Québec, Canada. Compositional heterogeneity was best explained by stream order, season, and watercourse discharge. Generally, community diversity was higher at agriculturally dominated lower order streams, compared to larger stream order systems such as small to large rivers. However, during times of lower relative water flow and cumulative 2-day rainfall, modestly higher relative diversity was found in the larger watercourses. Bacterial community assemblages were more sensitive to environmental/land use changes in the smaller watercourses, relative to small-to-large river systems, where the proximity of the sampled water column to bacteria reservoirs in the sediments and adjacent terrestrial environment was greater. Stream discharge was the environmental variable most significantly correlated (all positive) with bacterial functional groups, such as C/N cycling and plant pathogens. Comparison of the community structural similarity via network analyses helped to discriminate sources of bacteria in freshwater derived from, for example, wastewater treatment plant effluent and intensity and type of agricultural land uses (e.g., intensive swine production vs. dairy dominated cash/livestock cropping systems). When using metabarcoding approaches, bacterial community composition and coexisting pattern rather than individual taxonomic lineages, were better indicators of environmental/land use conditions (e.g., upstream land use) and bacterial sources in watershed settings. Overall, monitoring changes and differences in aquatic microbial communities at regional and local watershed scales has promise for enhancing environmental footprinting and for better understanding nutrient cycling and ecological function of aquatic systems impacted by a multitude of stressors and land uses.

Mechanisms of ultraviolet disinfection and chlorination of Escherichia coli: Culturability, membrane permeability, metabolism, and genetic damage

Traditional culture methods may underestimate the tolerance of microorganisms to disinfectants because of the existence of viable but nonculturable or sublethally injured cells after disinfection. The selection of a strict method is crucial for the evaluation of disinfection performance. The actions of 2 typical disinfectants - ultraviolet (UV) and chlorine - on the fecal indicator Escherichia coli were investigated by the detection of culturability, membrane permeability, metabolic activity, deoxyribonucleic acid (DNA), and messenger ribonucleic acid (mRNA). During UV disinfection, the irreversible damages in the cell membrane and cellular adenosine triphosphate (ATP) were negligible at low UV doses (<80mJ/cm²). However, membrane permeability was damaged at low doses of chlorine (<5mg/L), leading to leakage of cellular ATP. Our study showed that a slight lesion in DNA was detected even at high doses of UV (400mJ/cm²) and chlorine (>5mg/L) treatments. The decay of mRNA was more rapid than that of DNA. The degradation level of mRNA depended on the choice of target genes. After exposure to 50mJ/cm² UV dose or 5mg/L chlorine for 30min, the DNA damage repair function (RecA mRNA) was inhibited. The mRNA involved in the DNA damage repair function can be a potential indicator of bacterial viability.

Distribution comparison and risk assessment of free-floating and particle-attached bacterial pathogens in urban recreational water: Implications for water quality management

The risk of pathogen exposure in recreational water is a concern worldwide. Moreover, suspended particles, as ideal shelters for pathogens, in these waters also need attention. However, the risk caused by the pathogen-particle attachment is largely unknown. Accordingly, water samples in three recreational lakes in Beijing were collected and separated into free-floating (FL, 0.22-5μm) and particle-attached (PA, >5μm) fractions. Next-generation sequencing (NGS) was employed to determine the diversity of genera containing pathogens, and quantitative PCR (qPCR) was used to assess the presence of genes from Escherichia coli (uidA), Salmonella enterica (invA), Aeromonas spp. (aerA), Mycobacterium avium (16S) and Pseudomonas aeruginosa (oaa). The NGS results showed stable pathogen genera composition distinctions between the PA and FL fractions. Some genera, such as Aeromonas and Mycobacterium, exhibited higher abundances in the PA fractions. qPCR revealed that most of the gene concentrations were higher within particles than were FL fractions. Some gene levels showed correlations with the particle concentrations and lake nutrient levels. Further quantitative microbial risk assessment (QMRA) of selected strains (S. enterica and M. avium) indicated a higher health risk during secondary contact activities in lakes with more nutrients and particles. We concluded that suspended particles (mainly composed of algae) in urban recreational water might influence the pathogen distribution and could serve as reservoirs for pathogen contamination, with important management implications.

Greywater reuse - Assessment of the health risk induced by Legionella pneumophila

Greywater (GW), domestic wastewater excluding the streams generated by toilets and kitchens, can serve as an alternative water source. The main options for GW reuse are toilet flushing and garden irrigation, both generating aerosols. These may transmit inhalable pathogens like Legionella and present a potential health risk. This study quantified the health risk that may arise from inhalation of Legionella-contaminated aerosols due to non-potable GW reuse. Data on Legionella concentrations in potable water and GW was collected. Then, Quantitative Microbial Risk Assessment (QMRA) was performed for two possible exposure scenarios: garden irrigation and toilet flushing. This was performed while considering Legionella seasonality. In order to determine the safety of GW reuse regarding Legionella transmission, the obtained results were compared with estimated tolerable risk levels of infection and of disease. Both limits were expressed as Disability-Adjusted Life Years index (DALY) being 10^-4 and 10^-5, respectively. The QMRA revealed that the annual risk associated with reuse of treated and chlorinated GW for garden irrigation and toilet flushing was not significantly higher than the risk associated with using potable water for the same two purposes. In all studied scenarios, the health risk stemming from reusing treated and chlorinated GW was acceptable regarding Legionella infection. In contrast, reuse of untreated or treated but unchlorinated GW should not be practiced, as these are associated with significantly higher health risks.

Current Stormwater Harvesting Guidelines Are Inadequate for Mitigating Risk from Campylobacter During Nonpotable Reuse Activities

Campylobacter is a pathogen frequently detected in urban stormwater worldwide. It is one of the leading causes of enteric disease in many developed countries and is the leading cause of enteric disease in Australia. Prior to harvesting stormwater, adequate treatment is necessary to mitigate risks derived from such harmful pathogens. The goal of this research was to estimate the health risks associated with the exposure to Campylobacter when harvesting urban stormwater for toilet flushing and irrigation activities, and the role treatment options play in limiting risks. Campylobacter data collected from several urban stormwater systems in Victoria, Australia, were the inputs of a Quantitative Microbial Risk Assessment model. The model included seven treatment scenarios, spanning wetlands, biofilters, and more traditional treatment trains including those recommended by the Australian Guidelines for Water Recycling. According to our modeling and acceptable risk thresholds, only two treatment scenarios could supply water of sufficient quality for toilet flushing and irrigation end-uses: (1) using stormwater biofilters coupled with UV-treatment and (2) a more conventional coagulation, filtration, UV, and chlorination treatment plant. Importantly, our modeling results suggest that current guidelines in place for stormwater reuse are not adequate for protecting against exposure to Campylobacter. However, more research is required to better define whether the Campylobacter detectable in stormwater are pathogenic to humans.

Population structure and attribution of human clinical Campylobacter jejuni isolates from central Europe to livestock and environmental sources

Campylobacter jejuni is among the most prevalent causes of human bacterial gastroenteritis worldwide. Domesticated animals and, especially, chicken meat are considered to be the main sources of infections. However, the contribution of surface waters and wildlife in C. jejuni transmission to humans is not well understood. We have evaluated the source attribution potential of a six-gene multiplex PCR (mPCR) method coupled with STRUCTURE analysis on a set of 410 C. jejuni strains isolated from environment, livestock, food and humans in central Europe. Multiplex PCR fingerprints were analysed using Subclade prediction algorithm to classify them into six distinct mPCR clades. A subset of C. jejuni isolates (70%) was characterized by multilocus sequence typing (MLST) demonstrating 74% congruence between mPCR and MLST. The correspondence analysis of mPCR clades and sources of isolation indicated three distinct groups in the studied C. jejuni population-the first one associated with isolates from poultry, the second one with isolates from cattle, and the third one with isolates from the environment. The STRUCTURE analysis attributed 7.2% and 21.7% of human isolates to environmental sources based on MLST and mPCR fingerprints, respectively.

Potential effects of rainwater-borne hydrogen peroxide on pollutants in stagnant water environments

Microcosm experiments were conducted to examine the effects of rainwater-borne H₂O₂ on inactivation of water-borne coliforms, oxidation of ammonia and nitrite, and degradation of organic pollutants in canal and urban lake water. The results show that the soluble iron in the investigated water samples was sufficiently effective for reaction with H₂O₂ in the simulated rainwater-affected stagnant water to produce OH (Fenton reaction), which inactivated coliform bacteria even at a H₂O₂ dose as low as 5 μM within just 1 min of contact time. Coliform inhibition could last for at least 1 h and repeated input of H₂O₂ at a 30 min interval allowed maintenance of microbial inhibition for at least 3 h. Nitrification was also impeded by the Fenton process. The resulting inhibition of ammonia-oxidizing microbes reduced the removal rate of NH₄⁺ and the emission of gaseous N species. In the presence of H₂O₂ at a dose of 20 μM, Fenton-driven chemical oxidation appeared to outplay the impediment of biodegradation caused by inhibited microbial activities in terms of removing total polycyclic aromatic hydrocarbons from the water column. The findings point to a potential research direction that may help to explain the dynamics of water-borne pollutants in ambient water environments.

Simultaneous Identification of Campylobacter jejuni, Campylobacter coli, and Campylobacter lari with SmartCycler-Based Multiplex Quantitative Polymerase Chain Reaction

BACKGROUND

Consumption of Campylobacter contaminated food or water is a leading cause of human acute gastroenteritis. Campylobacter jejuni, Campylobacter coli, and Campylobacter lari account for over 95% of total Campylobacter infections. A multiplex quantitative polymerase chain reaction (qPCR) for simultaneous identification of C. jejuni, C. coli, and C. lari was developed for use with the SmartCycler II system.

MATERIALS AND METHODS

We evaluated and combined previously described primers and probes for Campylobacter detection, designed a new internal amplification control, and optimized the multiplex qPCR for the detection of C. jejuni, C. coli, and C. lari.

RESULTS

This method was 100% specific when tested against a panel of 32 target Campylobacter strains and 31 non-Campylobacter reference strains. Furthermore, there was no cross-reactivity with seven strains from four nontarget Campylobacter species. The amplification efficiency of each target in this multiplex qPCR was over 90%, and each coefficient of linearity was greater than 0.99. With artificially mixed genomic DNA, this method detected as few as two, three, and two genome copies of C. jejuni, C. coli, and C. lari, respectively. This method was also able to detect these three Campylobacter species in artificially contaminated milk with a sensitivity of five spiked cells of each target per reaction.

CONCLUSION

The three Campylobacter targets were simultaneously identified using artificially mixed genomic DNA and spiked raw milk. This SmartCycler-based multiplex qPCR is a rapid, specific, and sensitive method to identify C. jejuni, C. coli, and C. lari.

Quantifying potential sources of surface water contamination with Campylobacter jejuni and Campylobacter coli

Campylobacter is the most common causative agent of human bacterial gastroenteritis and is frequently found in surface water, where it indicates recent contamination with animal faeces, sewage effluent, and agricultural run-off. The contribution of different animal reservoirs to surface water contamination with Campylobacter is largely unknown. In the Netherlands, the massive poultry culling to control the 2003 avian influenza epidemic coincided with a 44-50% reduction in human campylobacteriosis cases in the culling areas, suggesting substantial environment-mediated spread of poultry-borne Campylobacter. We inferred the origin of surface water Campylobacter jejuni and Campylobacter coli strains in Luxembourg and the Netherlands, as defined by multilocus sequence typing, by comparison to strains from poultry, pigs, ruminants, and wild birds, using the asymmetric island model for source attribution. Most Luxembourgish water strains were attributed to wild birds (61.0%), followed by poultry (18.8%), ruminants (15.9%), and pigs (4.3%); whereas the Dutch water strains were mainly attributed to poultry (51.7%), wild birds (37.3%), ruminants (9.8%), and pigs (1.2%). Attributions varied over seasons and surface water types, and geographical variation in the relative contribution of poultry correlated with the magnitude of poultry production at either the national or provincial level, suggesting that environmental dissemination of Campylobacter from poultry farms and slaughterhouses can be substantial in poultry-rich regions.

Post-industrial river water quality-Fit for bathing again?

For the Ruhr River, bathing has been prohibited for decades. However, along with significant improvements of the hygienic water quality, there is an increasing demand of using the river for recreational purposes, in particular for bathing. In the "Safe Ruhr" interdisciplinary research project, demands, options and chances for lifting the bathing ban for the Ruhr River were investigated. As being the prominent reason for persisting recreational restrictions, microbiological water quality was in the focus of interest. Not only the faecal indicator organisms (FIOs) as required by the European Bathing Water Directive were considered, but also pathogens such as Salmonella, Pseudomonas aeruginosa, Legionella pneumophila, Campylobacter, Leptospira, enteroviruses and protozoan parasites. In this introductory paper, we firstly relate current recreational desires to historical experiences of river bathing. After recapitulating relevant microbial river contamination sources (predominantly sewage treatment plants, combined sewer overflows, and surface runoffs), we review existing knowledge about the relationships of FIOs and pathogens in rivers designated for recreational purposes, and then trace the evolution, rationale and validity of recreational freshwater quality criteria which are, despite obvious uncertainties, mostly relying on the FIO paradigm. In particular, the representativeness of FIOs is critically discussed. The working programme of Safe Ruhr, aiming at initiating and facilitating a process towards legalisation of Ruhr River bathing, is outlined. Sources of contamination can be technically handled which leaves the actual measures to political decisions. As contaminations are transient, only occasionally exceeding legal limits, a flexible bathing site management, warning bathers of non-safe situations, may amend technical interventions and offer innovative solutions. As a result, a situation-adapted system for lifting of the bathing ban for Ruhr River appears realistic.

"Nanofiltration" Enabled by Super-Absorbent Polymer Beads for Concentrating Microorganisms in Water Samples

Detection and quantification of pathogens in water is critical for the protection of human health and for drinking water safety and security. When the pathogen concentrations are low, large sample volumes (several liters) are needed to achieve reliable quantitative results. However, most microbial identification methods utilize relatively small sample volumes. As a consequence, a concentration step is often required to detect pathogens in natural waters. Herein, we introduce a novel water sample concentration method based on superabsorbent polymer (SAP) beads. When SAP beads swell with water, small molecules can be sorbed within the beads, but larger particles are excluded and, thus, concentrated in the residual non-sorbed water. To illustrate this approach, millimeter-sized poly(acrylamide-co-itaconic acid) (P(AM-co-IA)) beads are synthesized and successfully applied to concentrate water samples containing two model microorganisms: Escherichia coli and bacteriophage MS2. Experimental results indicate that the size of the water channel within water swollen P(AM-co-IA) hydrogel beads is on the order of several nanometers. The millimeter size coupled with a negative surface charge of the beads are shown to be critical in order to achieve high levels of concentration. This new concentration procedure is very fast, effective, scalable, and low-cost with no need for complex instrumentation.

Making green infrastructure healthier infrastructure

Increasing urban green and blue structure is often pointed out to be critical for sustainable development and climate change adaptation, which has led to the rapid expansion of greening activities in cities throughout the world. This process is likely to have a direct impact on the citizens' quality of life and public health. However, alongside numerous benefits, green and blue infrastructure also has the potential to create unexpected, undesirable, side-effects for health. This paper considers several potential harmful public health effects that might result from increased urban biodiversity, urban bodies of water, and urban tree cover projects. It does so with the intent of improving awareness and motivating preventive measures when designing and initiating such projects. Although biodiversity has been found to be associated with physiological benefits for humans in several studies, efforts to increase the biodiversity of urban environments may also promote the introduction and survival of vector or host organisms for infectious pathogens with resulting spread of a variety of diseases. In addition, more green connectivity in urban areas may potentiate the role of rats and ticks in the spread of infectious diseases. Bodies of water and wetlands play a crucial role in the urban climate adaptation and mitigation process. However, they also provide habitats for mosquitoes and toxic algal blooms. Finally, increasing urban green space may also adversely affect citizens allergic to pollen. Increased awareness of the potential hazards of urban green and blue infrastructure should not be a reason to stop or scale back projects. Instead, incorporating public health awareness and interventions into urban planning at the earliest stages can help insure that green and blue infrastructure achieves full potential for health promotion.