Nanometric Graphene Oxide Framework Membranes with Enhanced Heavy Metal Removal via Nanofiltration

Tailor-Made Heterocharged Covalent Organic Framework Membrane for Efficient Ion Separation

Pore size sieving, Donnan exclusion, and their combined effects seriously affect ion separation of membrane processes. However, traditional polymer-based membranes face some challenges in precisely controlling both charge distribution and pore size on the membrane surface, which hinders the ion separation performance, such as heavy metal ion removal. Herein, the heterocharged covalent organic framework (COF) membrane is reported by assembling two kinds of ionic COF nanosheets with opposite charges and different pore sizes. By manipulating the stacking quantity and sequence of two kinds of nanosheets, the impact of membrane surface charge and pore size on the separation performance of monovalent and multivalent ions is investigated. For the separation of anions, the effect of pore size sieving is dominant, while for the separation of cations, the effect of Donnan exclusion is dominant. The heterocharged TpEBr/TpPa-SO3H membrane with a positively charged upper layer and a negatively charged bottom layer exhibits excellent rejection of multivalent anions and cations (Ni2+, Cd2+, Cr2+, CrO4 2-, SeO3 2-, etc). The strategy provides not only high-performance COF membranes for ion separation but also an inspiration for the engineering of heterocharged membranes.

Recent progress on CO2 separation membranes

Presently, excessive carbon dioxide emissions represent a critical environmental challenge. Thus, urgent efforts are required to develop environmentally friendly and low-energy technologies for carbon dioxide treatment. In this case, membrane separation technology stands out as a promising avenue for CO2 separation, with selective membrane materials of high permeability playing a pivotal role in this process. Herein, we categorize CO2 separation membranes into three groups: inorganic membranes, organic membranes, and emerging membranes. Moreover, representative high-performance membranes are introduced and their synthesis methods, gas separation performances, and applications are examined. Furthermore, a brief analysis of the challenges encountered by carbon dioxide separation membrane materials is provided together with a discussion on the future research direction. It is expected that this review will provide some potential insights and guidance for the future development of CO2 separation membranes, which can promote their development.

Improvement of heavy metal separation performance by positively charged small-sized graphene oxide membrane

Multilayered graphene oxide (GO) membranes are promising to be widely applied to purify water effectively. However, the performance of most membranes prepared at present is not ideal, which may be related to the pore diameter of the substrate (determining the real loading amount of GO) and the size of the GO nanosheets (determining the number of channels on the unit area), which has not been fully studied. In this study, a rotating dip-coating reactor were firstly developed to ensure the uniform deposition of reactants on the surface of the substrate. Then, the preparation method for the membrane was improved. Microfiltration membranes were used as the supporting substrate, polydopamine was deposited as the adhesive layer, ethylenediamine was used to restrict the layer spacing to strengthen the size exclusion effect, and positively charged polyethyleneimine (PEI) was used to strengthen the Donnan effect. Finally, the effects of the pore size of the substrate and the size of the GO nanosheets on the membrane performance were investigated. Compared with the substrates with a pore size of 0.22 μm in most literatures, substrates of 0.1 μm can retain more small GO (SGO) nanosheets, thereby improving the performance. The performance of the SGO membrane was much better than that of the large-sized GO membrane. With a water permeability of no less than 7.9 L/(m2·h·bar), rejection rates for Pb2+ and Cd2+ of the SGO membrane could reach more than 97%. These findings are constructive to separate heavy metals from water effectively.

Techniques for recovery and recycling of ionic liquids: A review

Due to beneficial properties like non-flammability, thermal stability, low melting point and low vapor pressure, ionic liquids (ILs) have gained great interest from engineers and researchers in the past decades to replace conventional solvents. The superior characteristics of ILs make them promising for applications in fields as wide-ranging as pharmaceuticals, foods, nanoparticles synthesis, catalysis, electrochemistry and so on. To alleviate the high cost and environmental impact of ILs, various technologies have been reported to recover and purify the used ILs, as well as recycling the ILs. The aim of this article is to overview the state-of-the-art research on the recovery and recycling technologies for ILs including membrane technology, distillation, extraction, aqueous two-phase system (ATPS) and adsorption. In addition, challenges and future perspectives on ILs recovery are discussed. This review is expected to provide valuable insights for developing effective and environmentally friendly recovery methods for ILs.

Reduction-enhanced water flux through layered graphene oxide (GO) membranes stabilized with H3O+ and OH- ions

Graphene oxide (GO) is one of the most promising candidates for next generation of atomically thin membranes. Nevertheless, one of the major issues for real world application of GO membranes is their undesirable swelling in an aqueous environment. Recently, we demonstrated that generation of H3O+ and OH- ions (e.g., with an external electric field) in the interlayer gallery could impart aqueous stability to the layered GO membranes (A. Gogoi, ACS Appl. Mater. Interfaces, 2022, 14, 34946). This, however, compromises the water flux through the membrane. In this study, we report on reducing the GO nanosheets as a solution to this issue. With the reduction of the GO nanosheets, the water flux through the layered GO membrane initially increases and then decreases again beyond a certain degree of reduction. Here, two key factors are at play. Firstly, the instability of the H-bond network between water molecules and the GO nanosheets, which increases the water flux. Secondly, the pore size reduction in the interlayer gallery of the membranes, which decreases the water flux. We also observe a significant improvement in the salt rejection of the membranes, due to the dissociation of water molecules in the interlayer gallery. In particular, for the case of 10% water dissociation, the water flux through the membranes can be enhanced without altering its selectivity. This is an encouraging observation as it breaks the traditional tradeoff between water flux and salt rejection of a membrane.

Insights into the Mechanism of Selective Removal of Heavy Metal Ions by the Pulsed/Direct Current Electrochemical Method

Heavy metal pollution treatment in industrial wastewater is crucial for protecting biological and environmental safety. However, the highly efficient and selective removal of heavy metal ions from multiple cations in wastewater is a significant challenge. This work proposed a pulse electrochemical method with a low-/high-voltage periodic appearance to selectively recover heavy metal ions from complex wastewater. It exhibited a higher recovery efficiency for heavy metal ions (100% for Pb2+ and Cd2+, >98% for Mn2+) than other alkali and alkaline earth metal ions (Na+, Ca2+, and Mg2+ were kept below 3.6, 1.3, and 2.6%, respectively) in the multicomponent solution. The energy consumption was only 34-77% of that of the direct current electrodeposition method. The results of characterization and experiment unveil the mechanism that the low-/high-voltage periodic appearance can significantly suppress the water-splitting reaction and break the mass-transfer limitation between heavy metal ions and electrodes. In addition, the plant study demonstrates the feasibility of treated wastewater for agricultural use, further proving the high sustainability of the method. Therefore, it provides new insights into the selective recovery of heavy metals from industrial wastewater.

Ternary Heterostructure Membranes with Two-Dimensional Tunable Channels for Highly Selective Ion Separation

Selective ion separation from brines is pivotal for attaining high-purity lithium, a critical nonrenewable resource. Conventional methods encounter substantial challenges, driving the quest for streamlined, efficient, and swift approaches. Here, we present a graphene oxide (GO)-based ternary heterostructure membrane with a unique design. By utilizing Zn2+-induced confinement synthesis in a two-dimensional (2D) space, we incorporated two-dimensional zeolitic imidazolate framework-8 (ZIF-8) and zinc alginate (ZA) polymers precisely within layers of the GO membrane, creating tunable interlayer channels with a ternary heterostructure. The pivotal design lies in ion insertion into the two-dimensional (2D) membrane layers, achieving meticulous modulation of layer spacing based on ion hydration radius. Notably, the ensuing layer spacing within the hybrid ionic intercalation membrane occupies an intermediary realm, positioned astutely between small-sized hydrated ionic intercalation membrane spacing and their more extensive counterparts. This deliberate configuration accelerates the swift passage of diminutive hydrated ions while simultaneously impeding the movement of bulkier ions within the brine medium. The outcome is remarkable selectivity, demonstrated by the partitioning of K+/Li+ = 20.9, Na+/K+ = 31.2, and Li+/Mg2+ = 9.5 ion pairs. The ZIF-8/GO heterostructure significantly contributes to the selectivity, while the mechanical robustness and stability, improved by the ZA/GO heterostructure, further support its practical applicability. This report reports an advanced membrane design, offering promising prospects for lithium extraction and various ion separation processes.

Simultaneous Regulation of Surface Properties and Microstructure of Graphene Oxide Membranes for Enhanced Nanofiltration Performance

The surface properties and microstructure of graphene oxide (GO)-based membranes are both crucial for enhanced nanofiltration performance. Herein, a GO nanofiltration membrane is fabricated with regulatable surface properties and microstructure via a facile two-step impregnation in KOH and following HCl aqueous solutions. The type and number of oxygen-containing groups in GO membranes change with fewer C-O-C/C-OH and C═O but more COOH groups, and they are readily regulated by alkaline treatment time, which enables enhanced surface hydrophilicity and larger surface ζ potentials. Meanwhile, a few tiny defects are present in the GO sheets, which could increase the number of pores and decrease the length of water nanochannels. Such surface properties and microstructure together determine the excellent nanofiltration performance of the GO membranes with fast and selective water permeation, e.g., ∼99.5% rejection toward CBB G250 and flux of 56.9 ± 1.0 L m-2 h-1. This work provides insights into the design of high-performance two-dimensional laminar membranes.

Improvement of salt rejection efficiency of cellulose acetate membrane through modification by poly(amidoamine) dendrimer-functionalized graphene oxide

In this work, the grafting method using graphene oxide (GO) - poly(amidoamine) dendrimer (PAMAM) nanocomposite as filler for the functionalization of cellulose acetate membrane is reported. Here, cellulose acetate membrane incorporated by nanocomposite in the polymer solution was prepared through the phase inversion technique. The effect of embedding GO-PAMAM on the characterization properties and rejection performance was studied. The results of zeta potential, thermogravimetric analysis (TGA), contact angle measurements, Fourier-transform infrared spectroscopy (FTIR), and field emission scanning electron microscopy (FE-SEM) established successful modification. Based on the data found, adding the filler improves membrane properties. Loading of 1.00 wt% of GO/PAMAM was found to be the optimized amount of the filler in the membrane processing with the highest porosity (74%), antifouling behavior (88%), reversible fouling ratio (45.71%), and the least contact angle (∼40°). Hence, the rejection and permeability tests of the prepared membrane were examined by Na2SO4 (98.40%), NaCl (52%), and MgCl2 (57%) solutions through a lab dead-end cell. According to the results, the value of salt rejection established more permeability and rejection than neat cellulose acetate membrane.

Enhancing Nanofiltration Selectivity of Metal-Organic Framework Membranes via a Confined Interfacial Polymerization Strategy

Development of well-constructed metal-organic framework (MOF) membranes can bring about breakthroughs in nanofiltration (NF) performance for water treatment applications, while the relatively loose structures and inevitable defects usually cause low rejection capacity of MOF membranes. Herein, a confined interfacial polymerization (CIP) method is showcased to synthesize polyamide (PA)-modified NF membranes with MOF nanosheets as the building blocks, yielding a stepwise transition from two-dimensional (2D) MOF membranes to polyamide NF membranes. The CIP process was regulated by adjusting the loading amount of piperazine (PIP)-grafted MOF nanosheets on substrates and the additional content of free PIP monomers distributed among the nanosheets, followed by the reaction with trimesoyl chloride in the organic phase. The prepared optimal membrane exhibited a high Na2SO4 rejection of 98.4% with a satisfactory water permeance of 37.4 L·m-2·h-1·bar-1, which could be achieved by neither the pristine 2D MOF membranes nor the PA membranes containing the MOF nanosheets as the conventional interlayer. The PA-modified MOF membrane also displayed superior stability and enhanced antifouling ability. This CIP strategy provides a novel avenue to develop efficient MOF-based NF membranes with high ion-sieving separation performance for water treatment.

A Facile Way to Fabricate GO-EDA/Al2O3 Tubular Nanofiltration Membranes with Enhanced Desalination Stability via Fine-Tuning the pH of the Membrane-Forming Suspensions

Pristine graphene oxide (GO)-based membranes have proven promising for molecular and ion separation owing to efficient molecular transport nanochannels, but their separation ability in an aqueous environment is limited by the natural swelling tendency of GO. To obtain a novel membrane with anti-swelling behavior and remarkable desalination capability, we used the Al₂O₃ tubular membrane with an average pore size of 20 nm as the substrate and fabricated several GO nanofiltration ceramic membranes with different interlayer structures and surface charges by fine-tuning the pH of the GO-EDA membrane-forming suspension (pH = 7, 9, 11). The resultant membranes could maintain desalination stability, whether immersed in water for 680 h or operated under a high-pressure environment. When the pH of the membrane-forming suspension was 11, the prepared GE-11 membrane showed a rejection of 91.5% (measured at 5 bar) towards 1 mM Na₂SO₄ after soaking in water for 680 h. An increase in the transmembrane pressure to 20 bar resulted in an increase in the rejection towards the 1 mM Na₂SO₄ solution to 96.3%, and an increase in the permeance to 3.7 L·m^-2·h^-1·bar^-1. The proposed strategy in varying charge repulsion is beneficial to the future development of GO-derived nanofiltration ceramic membranes.

Novel MXene-Modified Polyphenyl Sulfone Membranes for Functional Nanofiltration of Heavy Metals-Containing Wastewater

In this work, MXene as a hydrophilic 2D nanosheet has been suggested to tailor the polyphenylsulfone (PPSU) flat sheet membrane characteristics via bulk modification. The amount of MXene varied in the PPSU casting solution from 0-1.5 wt.%, while a series of characterization tools have been employed to detect the surface characteristics changes. This included atomic force microscopy (AFM), scanning electron microscopy (SEM), contact angle, pore size and porosity, and Fourier-transform infrared spectroscopy (FTIR). Results disclosed that the MXene content could significantly influence some of the membranes' surface characteristics while no effect was seen on others. The optimal MXene content was found to be 0.6 wt.%, as revealed by the experimental work. The roughness parameters of the 0.6 wt.% nanocomposite membrane were notably enhanced, while greater hydrophilicity has been imparted compared to the nascent PPSU membrane. This witnessed enhancement in the surface characteristics of the nanocomposite was indeed reflected in their performance. A triple enhancement in the pure water flux was witnessed without compromising the retention of the membranes against the Cu²⁺, Cd²⁺ and Pd²⁺ feed. In parallel, high, and comparable separation rates (>92%) were achieved by all membranes regardless of the MXene content. In addition, promising antifouling features were observed with the nanocomposite membranes, disclosing that these nanocomposite membranes could offer a promising potential to treat heavy metals-containing wastewater for various applications.

Double-charged self-assembled rGO/g-C3N4 membrane prepared by "functional group substitution" for heavy metal ions rejection at low pressure

Heavy metals are still the critical pollutants in industrial wastewater and there is an urgent need for efficient and environmentally friendly treatment technologies. Reduced graphene oxide (rGO) is widely used for preparations of nanofiltration (NF) membranes but suffers from poor hydrophilicity and electronegativity. In this work, a double-charged rGO/g-C₃N₄-P membrane was prepared for removal of heavy metals at low pressure. Graphitic carbon nitride (g-C₃N₄) assisted reduction of GO membranes under ultraviolet (UV) irradiation, and the modification of functional groups with high polarity improved the hydrophilicity of membrane surface. The filtration performance for heavy metals of rGO/g-C₃N₄-P membrane was evaluated under low pressure (1-2 bar). The rejection rates of Cu²⁺, Cr³⁺, Mn²⁺, Cd²⁺, and Pb²⁺ by membranes reduced by UV for 18 h (rGO/g-C₃N₄-18-P membrane) reached 94.72 %, 98.05 %, 82.32 %, 88.2 % and 77.15 %, respectively. In the experiment of mixed simulated wastewater, the rejection rates of NO₃^- and SO₄^2- both reached >95 %. Outstanding rejection rates were attributed to the interaction and the synergy effect of double-charged layers as well as steric effects. Meanwhile, the water flux of rGO/g-C₃N₄-18-P membrane was as high as 37.14-50.16 L m^-2h^-1bar^-1 (1-2 bar). The high flux was due to the reduced degree of oxidation so that water molecules transported between GO nanochannels more smoothly and the transport path was shortened through the nanopores of g-C₃N₄. Obviously, flux and heavy metal rejection of rGO/g-C₃N₄-18-P membrane were simultaneously improved, breaking "trade-off" effect. Furthermore, rGO/g-C₃N₄-18-P membrane showed excellent antifouling ability and the potential for heavy metal wastewater filtration in comparison with other NF membranes reported in literature.

Synthesis of Chemically Modified Acid-Functionalized Multiwall Carbon Nanotubes with Benzimidazole for Removal of Lead and Cadmium Ions from Wastewater

In this work, acid-functionalized multiwalled carbon (MWCNTs–CO2H) nanotube was successfully functionalized with a heterocyclic scaffold, namely benzimidazole, to give novel functionalized multiwalled carbon nanotubes (BI@MWCNTs). Then, FTIR, XRD, TEM, EDX, Raman spectroscopy, DLS, and BET analyses were used to characterize the synthesized BI@MWCNTs. The effectiveness of the adsorption of two heavy metal ions, Cd2+ and Pb2+, in single metal and mixed metal solutions on the prepared material was investigated. Influencing parameters for the adsorption method, for example duration, pH, starting metal concentration, and BI@MWCNT dosage, were examined for both metal ions. Moreover, adsorption equilibrium isotherms fit with the Langmuir and Freundlich models perfectly, while the intra-particle diffusion models provide pseudo-second order adsorption kinetics. The adsorption of Cd2+ and Pb2+ ions onto BI@MWCNTs revealed an endothermic and a spontaneous method with great affinity as a result of the negative values of Gibbs free energy (ΔG) and the positive values of enthalpy (ΔH) and entropy (ΔS). Both Pb2+ and Cd2+ ions were completely eliminated from aqueous solution (100 and 98%, respectively) using the prepared material. Additionally, BI@MWCNTs have a high adsorption capacity and were regenerated in a simple way and reused for six cycles, which make them a cost-effective and efficient absorbent for the removal of such heavy metal ions from wastewater.

Identifying Geogenic and Anthropogenic Aluminum Pollution on Different Spatial Distributions and Removal of Natural Waters and Soil in Çanakkale, Turkey

The Çanakkale-Kirazlı region (Turkey) is enriched with minerals, especially aluminum (Al), which dangerously get transported into aquatic media due to several mining and geological activities in recent years. In this study, Al and other potentially toxic metals (PTMs) including B, Ba, Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, Si, and Zn, in both water and soil samples, were measured for quality determination. Selected metals were also analyzed by the enrichment factor (EF), the geoaccumulation index (I _geo), the contamination factor (CF), and the pollution load index (PLI) to evaluate both water and soil pollution geogenically or anthropogenically. Also, the metals were clustered to support the pollution source with Pearson's correlation, principal component analysis (PCA), and hierarchical cluster analysis (HCA). Forty-five natural water samples and 12 soil samples were collected spatially. To perform pollution assessment, two fundamental treatment processes to remove Al pollution from the sample including the highest Al concentration (38.38 mg/L) in water were applied: (1) precipitation with pH adjustment and (2) removal with ion exchange. The pH values of water samples were changed in the range of 3-9 to test the dissolution of Al. The results demonstrated that the study area was mostly under the influence of geogenic aluminum pollution.

Lamellar Graphene Oxide-Based Composite Membranes for Efficient Separation of Heavy Metal Ions and Desalination of Water

Sufficient efforts have been carried out to fabricate highly efficient graphene oxide (GO) lamellar membranes for heavy metal ion separation and desalination of water. However, selectivity for small ions remains a major problem. Herein, GO was modified by using onion extractive (OE) and a bioactive phenolic compound, i.e., quercetin. The as-prepared modified materials were fabricated into membranes and used for separation of heavy metal ions and water desalination. The GO/onion extract (GO/OE) composite membrane with a thickness of 350 nm shows an excellent rejection efficiency for several heavy metal ions such as Cr⁶⁺ (∼87.5%), As³⁺ (∼89.5%), Cd²⁺ (∼93.0%), and Pb²⁺ (∼99.5%) and a good water permeance of ∼460 ± 20 L m^-2 h^-1 bar^-1. In addition, a GO/quercetin (GO/Q) composite membrane is also fabricated from quercetin for comparative studies. Quercetin is an active ingredient of onion extractives (2.1% w/w). The GO/Q composite membranes show good rejection up to ∼78.0, ∼80.5, ∼88.0, and 95.2% for Cr⁶⁺, As³⁺, Cd²⁺, and Pb²⁺, respectively, with a DI water permeance of ∼150 ± 10 L m^-2 h^-1 bar^-1. Further, both membranes are used for water desalination by measuring rejection of small ions such as NaCl, Na₂SO₄, MgCl₂, and MgSO₄. The resulting membranes show >70% rejection for small ions. In addition, both membranes are used for filtration of Indus River water and the GO/Q membrane shows remarkably high separation efficiency and makes river water suitable for drinking purpose. Furthermore, the GO/QE composite membrane is highly stable up to ∼25 days under acidic, basic, and neutral environments as compared to GO/Q composite and pristine GO-based membranes.

GO-Based Membranes for Desalination

Graphene oxide (GO), owing to its atomic thickness and tunable physicochemical properties, exhibits fascinating properties in membrane separation fields, especially in water treatment applications (due to unimpeded permeation of water through graphene-based membranes). Particularly, GO-based membranes used for desalination via pervaporation or nanofiltration have been widely investigated with respect to membrane design and preparation. However, the precise construction of transport pathways, facile fabrication of large-area GO-based membranes (GOMs), and robust stability in desalination applications are the main challenges restricting the industrial application of GOMs. This review summarizes the challenges and recent research and development of GOMs with respect to preparation methods, the regulation of GOM mass transfer pathways, desalination performance, and mass transport mechanisms. The review aims to provide an overview of the precise regulation methods of the horizontal and longitudinal mass transfer channels of GOMs, including GO reduction, interlayer cross-linking, intercalation with cations, polymers, or inorganic particles, etc., to clarify the relationship between the microstructure and desalination performance, which may provide some new insight regarding the structural design of high-performance GOMs. Based on the above analysis, the future and development of GOMs are proposed.

Investigation on the Removal Performances of Heavy Metal Copper (II) Ions from Aqueous Solutions Using Hydrate-Based Method

Since heavy metal ion-contaminated water pollutionis becoming a serious threat to human and aquatic lives, new methods for highly efficient removal of heavy metal ions from wastewater are important to tackle environmental problems and sustainable development. In this work, we investigate the removal performances of heavy metal copper (II) ions from aqueous solutions using a gas hydrate-based method. Efficient removal of heavy metal copper (II) ions from wastewater via a methane hydrate process was demonstrated. The influence of the temperature, hydration time, copper (II) ions concentration, and stirring rate on the removal of heavy metal copper (II) ions were evaluated. The results suggested that a maximum of 75.8% copper (II) ions were removed from aqueous solution and obtained melted water with 70.6% yield with a temperature of -2 °C, stirring speed 800 r/min, and hydration time of 4 h with aninitial copper concentration of 100 mg/L. The initial concentration of copper (II) ions in the aqueous solution could be increased to between 100 and 500 mg/L. Meanwhile, our study also indicated that 65.6% copper (II) ions were removed from aqueous solution and the yield of melted water with 56.7%, even with the initial copper concentration of 500 mg/L. This research work demonstrates great potential for general applicability to heavy metal ion-contaminated wastewater treatment and provides a reference for the application of the gas hydrate method in separation.

Ultrathin Graphene Oxide-Based Nanocomposite Membranes for Water Purification

Two-dimensional graphene oxide (GO)-based lamellar membranes have been widely developed for desalination, water purification, gas separation, and pervaporation. However, membranes with a well-organized multilayer structure and controlled pore size remain a challenge. Herein, an easy and efficient method is used to fabricate MoO₂@GO and WO₃@GO nanocomposite membranes with controlled structure and interlayer spacing. Such membranes show good separation for salt and heavy metal ions due to the intensive stacking interaction and electrostatic attraction. The as-prepared composite membranes showed high rejection rates (˃70%) toward small metal ions such as sodium (Na⁺) and magnesium (Mg²⁺) ions. In addition, both membranes also showed high rejection rates ˃99% for nickel (Ni²⁺) and lead (Pb²⁺) ions with good water permeability of 275 ± 10 L m^-2 h^-1 bar^-1. We believe that our fabricated membranes will have a bright future in next generation desalination and water purification membranes.

Next-generation graphene oxide additives composite membranes for emerging organic micropollutants removal: Separation, adsorption and degradation

In the past two decades, membrane technology has attracted considerable interest as a viable and promising method for water purification. Emerging organic micropollutants (EOMPs) in wastewater have trace, persistent, highly variable quantities and types, develop hazardous intermediates and are diffusible. These primary issues affect EOMPs polluted wastewater on an industrial scale differently than in a lab, challenging membranes-based EOMP removal. Graphene oxide (GO) promises state-of-the-art membrane synthesis technologies and use in EOMPs removal systems due to its superior physicochemical, mechanical, and electrical qualities and high oxygen content. This critical review highlights the recent advancements in the synthesis of next-generation GO membranes with diverse membrane substrates such as ceramic, polyethersulfone (PES), and polyvinylidene fluoride (PVDF). The EOMPs removal efficiencies of GO membranes in filtration, adsorption (incorporated with metal, nanomaterial in biodegradable polymer and biomimetic membranes), and degradation (in catalytic, photo-Fenton, photocatalytic and electrocatalytic membranes) and corresponding removal mechanisms of different EOMPs are also depicted. GO-assisted water treatment strategies were further assessed by various influencing factors, including applied water flow mode and membrane properties (e.g., permeability, hydrophily, mechanical stability, and fouling). GO additive membranes showed better permeability, hydrophilicity, high water flux, and fouling resistance than pristine membranes. Likewise, degradation combined with filtration is two times more effective than alone, while crossflow mode improves the photocatalytic degradation performance of the system. GO integration in polymer membranes enhances their stability, facilitates photocatalytic processes, and gravity-driven GO membranes enable filtration of pollutants at low pressure, making membrane filtration more inexpensive. However, simultaneous removal of multiple contaminants with contrasting characteristics and variable efficiencies in different systems demands further optimization in GO-mediated membranes. This review concludes with identifying future critical research directions to promote research for determining the GO-assisted OMPs removal membrane technology nexus and maximizing this technique for industrial application.

The Role of Oxidation Pattern and Water Content in the Spatial Arrangement and Dynamics of Oxidized Graphene-Based Aqueous Dispersions

In this work, we employ fully atomistic molecular dynamics simulations to elucidate the effects of the oxidation pattern and of the water content on the organization of graphene sheets in aqueous dispersions and on the dynamic properties of the different moieties at neutral pH conditions. Analysis of the results reveals the role of the oxidation motif (peripherally or fully oxidized flakes) in the tendency of the flakes to self-assemble and in the control of key structural characteristics, such as the interlayer distance between the sheets and the average size and the distribution of the formed aggregates. In certain cases, the results are compared to a pertinent experimental system, validating further the relevant computational models. Examination of the diffusional motion of the oxidized flakes shows that different degrees of spatial restriction are imposed upon the decrease in the water content and elucidates the conditions under which a motional arrest of the flakes takes place. At constant water content, the structural differences between the formed aggregates appear to additionally impart distinct diffusional characteristics of a water molecule. A detailed examination of the counterion dynamics describes their interaction with the oxidized flakes and their dependence on the water content and on the oxidation pattern, offering new insight into the expected electrical properties of the dispersions. The detailed information provided by this work will be particularly useful in applications such as molecular sieving, nanofiltration, and in cases where conductive membranes based on oxidized forms of graphene are used.

Graphene Oxide-Based Membranes Intercalated with an Aromatic Crosslinker for Low-Pressure Nanofiltration

Graphene oxide (GO), a carbonaceous 2D nanomaterial, has received significant interest as a next-generation membrane building block. To fabricate high-performance membranes, an effective strategy involves stacking GO nanosheets in laminated structures, thereby creating unique nanochannel galleries. One outstanding merit of laminar GO membranes is that their permselectivity is readily tunable by tailoring the size of the nanochannels. Here, a high-performance GO-based nanofiltration membrane was developed by intercalating an aromatic crosslinker, α,α/-dichloro-p-xylene (DCX), between the layers in laminated GO nanosheets. Owing to the formation of strong covalent bonds between the crosslinker and the GO, the resulting GO laminate membrane exhibited outstanding structural stability. Furthermore, due to the precisely controlled and enlarged interlayer spacing distance of the developed DCX-intercalated GO membrane, it achieved an over two-fold enhancement in water permeability (11 ± 2 LMH bar^-1) without sacrificing the rejection performance for divalent ions, contrary to the case with a pristine GO membrane.

Ionic Liquid-Reduced Graphene Oxide Membrane with Enhanced Stability for Water Purification

There has been a growing interest in water purification by graphene oxide (GO) laminate membranes due to their exceptional hydrophilicity, high throughput, and extraordinary separation performance originating from their two-dimensional and well-defined nanostructure. However, the swelling and stability in an aqueous environment are areas of concern for the GO laminate membranes. Here, a novel methylimidazolium ionic liquid-reduced GO (mimG)-assembled GO laminate membrane (mimG-GO) with remarkable stability was fabricated by a vacuum-assisted strategy for water purification. Methylimidazolium-based ionic liquid-reduced graphene oxide (mimG) was prepared by a facile nucleophilic ring-opening mechanism. Fabricated membranes were thoroughly characterized for stability, structural, permeance, and rejection properties in an aqueous environment. A combination of cationic mimG and GO nanosheets improves membrane stability in the aqueous environment via cation-π interactions and creates nanofluidic channels for facile water transport while yielding significant enhancement in the salt and dye separation performance. The pore size and the number of nanofluidic channels were precisely controlled via material deposition and laminate thickness to remove salts from water. The mimG-GO laminate membrane containing 72.2 mg m^-2 deposition showed a permeance of 14.9 LMH bar^-1, 50% higher than 9.7 LMH bar^-1 of the neat GO laminate membrane, in addition to an increase in Na₂SO₄ salt rejection from 46.6 to 77.4%, overcoming the flux-rejection trade-off. The mimG-GO laminate membrane also rejected various anionic dyes (i.e., 99.9% for direct red 80 (DR 80), 96.8% for reactive black 5 (RB 5), and 91.4% for methyl orange (MO)). The mimG-GO laminate membrane containing 361.0 mg m^-2 deposition showed the highest rejection for Na₂SO₄ (92.1%) and 99.9% rejection for DR 80, 99.0% rejection for RB 5, and 98.1% rejection for MO dyes keeping a flux of 2.6 LMH bar^-1. Partial reduction and covalent grafting of ionic liquid moieties on GO helped to enhance the cation-π interaction between GO laminates, which showed enhanced stability, frictionless water transport, with high salt and dye rejection. Moreover, a simultaneous improvement in water permeance and solute rejection reveals the great potential of ionic liquid-functionalized GO laminate membranes for water-based applications.

Fabrication of ZnO/y-FeOOH nanoparticles embedded on the polyethylene terephthalate membrane: Evaluation of antifouling behavior and COD removal

Nanofiltration contributes to the development of advanced treatment of wastewater. An antifouling mixed matrix recycled polyethylene terephthalate (rPET) membrane modified by the hydrophilic ZnO/y-FeOOH nanoparticles (NPs) was fabricated via the electrospinning method. The effect of ZnO/y-FeOOH NP_S embedded in rPET as a modifier on the fabrication of nanocomposite membranes was investigated regarding water flux, membrane morphology, permeability, fouling resistance, and COD removal. The surface morphology of the rPET-ZnO/y-FeOOH membrane was evaluated by field emission scanning electron microscopy (FESEM), energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), water contact angle (WCA), and porosity and pore structure.Due to the embedding of NPs, the resulting rPET-ZnO/y-FeOOH membrane, with a low WCA of 53.404° angle, conforms significantly improved hydrophilicity and water permeation flux. The FESEM image displayed the distribution of cuboidal and needle-like ZnO and FeOOH NPs on the rPET membrane. The performance of the nanofiltration system related to the removal efficiency of COD was studied. It was deduced that the rPET-ZnO/y-FeOOH membrane had a superior COD removal capability (95.7%) at a pressure of 2 bar. Protein rejection tests were performed on antifouling behavior. The nanocomposite membrane with a high antifouling capability was related to 0.5 wt·% ZnO/y-FeOOH NPs (flux recovery ratio [FRR] = 96.2%, R_r = 90.21%, and R_ir = 3.001%). The modification procedure in this study (as a great improving technique) was proposed to fabricate the antifouling nanofiltration membrane.

Cross-linked laminar graphene oxide membranes for wastewater treatment and desalination: A review

Two-dimensional (2D) lamellar graphene oxide (GO) membranes are emerging as attractive materials for molecular separation in water treatment because of their single atomic thickness, excellent hydrophilicity, large specific surface areas, and controllable properties. To yet, commercialization of GO laminar membranes has been hindered by their propensity to swell in hydrated conditions. Thus, chemical crosslinking of GO sheets with the polymer matrix is used to improve GO membrane hydration stability. This review focuses on pertinent themes such as how chemical crosslinking improves the hydration stability, separation performance, and antifouling properties of GO membranes.

A super-hydrophilic partially reduced graphene oxide membrane with improved stability and antibacterial properties

In order to improve stability and antibacterial property, a novel super-hydrophilic partially reduced graphene oxide membrane was prepared by interfacial polymerization of piperazine and partially reduced graphene oxide as aqueous solution and trimesoyl chloride as organic solution. Fourier transform infrared spectroscopy, scanning electron microscope, and contact angle measurement were conducted to probe the morphology and properties of the membranes. The modified membrane possessed super-hydrophilicity, improved durability and swelling resistance. The optimized membrane had a molecular weight cut off of about 674 Da and possessed a pure water permeability of 49.86 L·m^-2·h^-1·MPa^-1. The retention order of salts was Na₂SO₄ > MgSO₄ > MgCl₂ > Na₂CO₃ > CaCl₂ > NaCl, while the rejection for four kinds of pharmaceuticals followed the order of ibuprofen (92%) > carbamazepine (87%) > amlodipine (80%) > atenolol (76%), indicating that the negatively charged membrane could improve the retention performance by the electrostatic repulsive effect. Moreover, the enhanced antibacterial performance of membrane attributed to the dual effects of the super-hydrophilicity and the tea polyphenols antibacterial material loading, which may alter the charge distribution on and within the membrane, leading to loss of cell viability.

A PEI/TMC membrane modified with an ionic liquid with enhanced permeability and antibacterial properties for the removal of heavy metal ions

Heavy metal ions in drinking water severely threaten public health in various places worldwide. Nanofiltration (NF) membrane technology is an attractive option for heavy metal ions removal; however, improving NF membrane filtration performance is required to make their industrial application viable. In this study, a positively charged THPC/PEI-TMC NF membrane was designed via simple one-step incorporation of Tetrakis (hydroxymethyl) phosphonium chloride (THPC) biocide on the surface of PEI-TMC membranes, significantly optimizing surface morphology, roughness, hydrophilicity, and zeta potential of PEI-TMC membranes. It was found that the pure water permeability (11.6 Lm^-2h^-1bar^-1) of the THPC modified membrane was three times larger than that of the original PEI-TMC membrane (3.4 Lm^-2h^-1bar^-1) while maintaining a high level of ion rejections (around 95% for Zn²⁺, Cd²⁺, Ni²⁺, Cu²⁺ and about 90% for Pb²⁺). Additionally, the incorporation of the THPC on the original PEI-TMC membrane surface also conferred good antibacterial properties, which protect the organic membrane from bacterial growth and prolong the lifespan of the membrane.

Arresting Aqueous Swelling of Layered Graphene-Oxide Membranes with H3O+ and OH- Ions

Over the past decade, graphene oxide (GO) has emerged as a promising membrane material with superior separation performance and intriguing mechanical/chemical stability. However, its practical implementation remains very challenging primarily because of its undesirable swelling in an aqueous environment. Here, we demonstrated that dissociation of water molecules into H₃O⁺ and OH^- ions inside the interlayer gallery of a layered GO membrane can strongly affect its stability and performance. We reveal that H₃O⁺ and OH^- ions form clusters inside the GO laminates that impede the permeance of water and salt ions through the membrane. Dynamics of those clusters is sensitive to an external ac electric field, which can be used to tailor the membrane performance. The presence of H₃O⁺ and OH^- ions also leads to increased stability of the hydrogen bond (H-bond) network among the water molecules and the GO layers, which further reduces water permeance through the membrane, while crucially imparting stability to the layered GO membrane against undesirable swelling.

SERS-Based Methodology for the Quantification of Ultratrace Graphene Oxide in Water Samples

The extensive use of graphene materials in real-world applications has increased their potential release into the environment. To evaluate their possible health and ecological risks, there is a need for analytical methods that can quantify these materials at very low concentrations in environmental media such as water. In this work, a simple, reproducible, and sensitive method to detect graphene oxide (GO) in water samples using the surface-enhanced Raman spectroscopy (SERS) technique is presented. The Raman signal of graphene is enhanced when deposited on a substrate of gold nanoparticles (AuNPs), thus enabling its determination at low concentrations with no need for any preconcentration step. The practical limit of quantification achieved with the proposed method was 0.1 ng mL^-1, which is lower than the predicted concentrations for graphene in effluent water reported to date. The optimized procedure has been successively applied to the determination of ultratraces of GO in water samples.

Recent progress on fabrication methods of graphene-based membranes for water purification, gas separation, and energy sustainability

Graphene-based layered materials have got significant interest in membrane technology for water desalination, gas separation, organic nanofiltration, pervaporation, proton exchange applications, etc. and show remarkable results. Up to date, various methods have been developed for fabrication of high performance membrane. Most of them are only suitable for research purposes, but not appropriate for mass transport barrier and membrane applications that require large-area synthesis. In this comprehensive review, we summarized the current synthesis and fabrication methods of graphene-based membranes. Emphasis will be given on fabrication of both graphene-based nanoporous and lamellar membranes. Finally, we discuss the current engineering hurdles and future research directions yet to be explored for fabrication of such membranes.

Current status and future prospects of membrane separation processes for value recovery from wastewater

Resource constraints and deteriorating environment have made it necessary to look for intensification of the industrial processes, to recover value from spent streams for reuse. The development of reverse osmosis has already established that water can be recovered from aqueous streams in a cost-effective and beneficial manner to the industries. With the development of several membrane processes and membrane materials, the possibility of recovering value from the effluents looks like a workable proposition. In this context, the potentialities of the different membrane processes in value recovery are presented. Among the pressure-driven processes, reverse osmosis can be used for the recovery of water as value. Nanofiltration has been used for the recovery of several dyes including crystal violet, congo red, methyl blue, etc., while ultrafiltration has been used in the fractionation of different solute species using membranes of different pore-size characteristics. Diffusion dialysis is found useful in the separation of acids from its salt solutions. Bipolar membrane electrodialysis has the potential to regenerate acid and base from salt solutions. Thermally driven membrane distillation can provide desalinated water, besides reducing the temperature of hot discharge streams. Passive membrane processes such as supported liquid membranes and membrane-assisted solvent extraction have been found useful in separating minor components from the wastewater streams. The details are discussed to drive home that membrane processes can be useful to achieve the objectives of value recovery, in a cost-effective manner through process intensification, as they are more compact and individual streams can be treated and value used seamlessly.

Plasma-assisted in-situ preparation of graphene-Ag nanofiltration membranes for efficient removal of heavy metal ions

Graphene-based membranes have been considered as promising separation membranes for water treatments due to their unique two-dimensional confined channels. However, subject to the preparation technology, the effective construction of graphene-based filtration membranes with suitable separation ability on heavy metal ions still face considerable challenges. Herein, we have successfully constructed a kind of graphene-based (reduced graphene oxide, rGO) nanofiltration membranes by adopting a plasma-assisted in-situ photocatalytic reduction method. Graphene oxide-Ag (GO-Ag) composite sheets are prepared firstly and then assembled into membranes by vacuum filtration. With the use of Ag nanoparticles as plasmonic photocatalyst, GO-Ag films can be in-situ reduced, leading to the formation of rGO-based composite membranes. Thanks to the mild in-situ reduction process, the filtration ability on heavy metal ions (Cr(VI), Cr³⁺, Cu²⁺ and Pb²⁺) caused by lamellar structure is well retained in the as-formed rGO-Ag membranes. Especially, when treating the typical toxic Cr(VI) solution, the retention capacity, water flux and stability of rGO-Ag membranes are all improved compared with that of the original GO-Ag ones. In addition, the effectively rejection of Cr(VI) from mixed solutions containing both Cr(VI) and Cr(III) also suggests the good applicability of such rGO-Ag membranes in a complex wastewater system.

D-spacing controllable GO membrane intercalated by sodium tetraborate pentahydrate for dye contamination wastewater treatment

Sodium tetraborate pentahydrate (STB) was intercalated into graphene oxide (GO) nanosheets to form a nanocomposite (STB@GO). Subsequently, it was self-assembled on a substrate membrane to prepare STB@GO nanofiltration membrane. The properties of the STB@GO powder samples and the nanofiltration membrane were studied using scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), contact angle (CA), and zeta potential. When the STB concentration was 1.0 g/L in the cross-linking reaction, the membrane was described as the STB₂@GO membrane and exhibited a large interlayer space (d-spacing = 1.347 nm), high hydrophilicity (CA = 22.2°), and high negative potential (zeta = -18.0 mV). Meanwhile, the pure water flux of the membrane was significantly increased by 56.60% than that of the GO membrane. In addition, the STB₂@GO membrane exhibited a favorable capability for dye rejection,98.52% for Evans blue (EB), 99.26% for Victoria blue B (VB), 91.94% for Alizarin yellow (AY), and 93.21% for Neutral red (NR). Furthermore, the STB₂@GO membrane performed better in dye separation under various types and concentrations of dye, pH values, and ions in solution. Thus, this study provides a promising method for preparing laminated GO nanofiltration membranes for dye wastewater treatment.