Phosphorus Depletion as a Green Alternative to Biocides for Controlling Biodegradation of Metalworking Fluids

Effects of green synthesized and commercial nZVI on crystal violet degradation by Burkholderia vietnamiensis C09V: Dose-dependent toxicity and biocompatibility

The increasingly common remedial application of nanoscale zero-valent iron (nZVI) to alleviate specific contaminant issues may inadvertently lead to nZVI accumulation in wastewater. This is a potential concern, because the effect of nZVI on the common microbes essential for wastewater biotreatment is not known. This is further complicated when there are many ways available to synthesize nZVI, which may interreact with bacteria differently. Thus, in this study, the different effects of nZVI synthesized by Eucalyptus leaves (EL-nZVI) and a commercially synthesized nZVI on the biodegradation of crystal violet by Burkholderia vietnamiensis C09V (B.V. C09V) was studied. At high dose (1000 mg/L), EL-nZVI and commercial nZVI both significantly inhibited the removal of crystal violet by B.V. C09V, decreasing removal rates by 10.5 and 13.1% respectively. Optical density (OD₆₀₀) and soluble protein assays indicated that the growth of B.V. C09V improved under low doses (100 mg/L), but remained inhibited under high doses (500 and 1000 mg/L) of both commercial and EL-nZVI. Enzymes were also sensitive to nZVI, where the commercial variant exerted a greater effect on both the activity of lactate dehydrogenase (LDH) and superoxide dismutase (SOD) than EL-nZVI, indicating that EL-nZVI was less toxic than commercial nZVI. LIVE/DEAD staining also showed that the number of apoptotic cells was significantly higher when exposed to commercial nZVI rather than EL-nZVI. Furthermore, scanning electron microscopy (SEM) confirmed that direct contact between nZVI and cells at 1000 mg/L nZVI caused cell membrane disruption. Whereas, at 100 mg/L EL-nZVI, B.V. C09V grew better due to the formation of dense biofilms around the suspended EL-nZVI at a. Fourier transform infrared spectra (FTIR), confirmed an abundance of oxygen-containing functional groups on the surface of EL-nZVI which provided better biocompatibility than commercial nZVI. Overall, while dose was the most significant factor influencing nZVI toxicity, surface composition and morphology was also important. These new findings suggest chemical synthesis of metal nanoparticles should be replaced by biosynthetic routes to maintain viable microbial pollution during wastewater treatment.

Contribution of autochthonous diazotrophs to polycyclic aromatic hydrocarbon dissipation in contaminated soils

Understanding the role played by autochthonous functional microbes involved in the biotransformation of pollutants would help optimize bioremediation performance at contaminated sites. However, our knowledge of the remediation potential of indigenous diazotrophs in contaminated soils remains inadequate. Using a microcosm experiment, soil nitrogen fixation activity was manipulated by molybdenum (Mo) and tungsten (W), and their effect on the removal of polycyclic aromatic hydrocarbons (PAHs) was determined in agricultural and industrial soils. Results showed that after 42 days of incubation, PAH dissipation efficiency was significantly enhanced by 1.06-fold in 600 μg kg^-1 Mo-treated agricultural soil, compared with that in the control. For the industrial soil, 1200 μg kg^-1 Mo treatment significantly promoted PAH removal by 90.76% in 21 days, whereas no significant change was observed between treatments and control at the end of the incubation period. W also exerted a similar effect on PAH dissipation. The activity and gene abundance of nitrogenase were also increased under Mo/W treatments in the two soils. Spearman's correlation analysis further indicated that removal of PAHs was positively correlated with nitrogenase activity in soil, which could be due to the elevated abundances of PAH-degrading genes (PAH-RHDα) in these treatments. Our results suggest the importance of autochthonous diazotrophs in PAH-contaminated soils, which indicates a feasible and environmentally friendly biostimulation strategy of manipulating nitrogen fixation capacity.

Quorum sensing inhibition as a promising method to control biofilm growth in metalworking fluids

Microbial contamination in metalworking systems is a critical problem. This study determined the microbial communities in metalworking fluids (MWFs) from two machining shops and investigated the effect of quorum sensing inhibition (QSI) on biofilm growth. In both operations, biofilm-associated and planktonic microbial communities were dominated by Pseudomonadales (60.2-99.7%). Rapid recolonization was observed even after dumping spent MWFs and meticulous cleaning. Using Pseudomonas aeruginosa PAO1 as a model biofilm organism, patulin (40 µM) and furanone C-30 (75 µM) were identified as effective QSI agents. Both agents had a substantially higher efficacy compared to α-amylase (extracellular polymeric substance degrading enzyme) and reduced biofilm formation by 63% and 76%, respectively, in MWF when compared to untreated controls. Reduced production of putatively identified homoserine lactones and quinoline in MWF treated with QS inhibitors support the effect of QSI on biofilm formation. The results highlight the effectiveness of QSI as a potential strategy to eradicate biofilms in MWFs.

Comparison of metalworking fluids biodegradation efficiency by autochthonous and environmental communities

The aim of this study was to evaluate the biodegradation potential of microbiota isolated from different environmental niches towards different types of metalworking fluids (MWF). The first experimental stage was focused on the assessment of biochemical oxygen demand reduction efficiency of autochthonous and environmental microbial communities. Based on the obtained results, the following order describing the biodegradation potential of communities from the studied niches was established: petroleum contaminated soil > waste repository ≥ waste MWF tanks > pesticide-treated field > activated sludge > municipal sewage effluents. For comparative purposes, the most efficient community originating from petroleum contaminated soil (PCS1) was selected for further studies along with the most efficient community originating from a waste MWF tank (WMT1). The studied communities achieved 100% biodegradation efficiency of decanedioic and dodecanedioic acids as well as glycerine and polyethoxylated dodecanol. However, the PCS1 community was more versatile and displayed significantly higher biodegradation efficiency of mineral oil (80% compared to 50% in case of WMT1). Similarly, experiments using pristine and spent MWF solutions confirmed that the PCS1 community outperformed the WMT1 community during the biodegradation of MWF containing oil as the main component (COD reduction of 80, 60 and 30% in case of semi-synthetic MWF, soluble oil and spent MWF, respectively). Results of community dynamics assessment using quantitative real-time PCR after the biodegradation of different types of MWF confirmed that the PCS1 community was characterized by high genetic stability and allowed to indicate the potential 'key players'.