Electric Field Effects on Bacterial Deposition and Transport in Porous Media

Mechanisms of heating-electrokinetic co-driven perfluorooctanoic acid (PFOA) adsorption on zeolite

Slow release of emerging contaminants limits their accessibility from soil to pore water, constraining the treatment efficiency of physio-chemical treatment sites. DC fields mobilize organic contaminants and influence their interactions with geo-matrices such as zeolites. Poor knowledge, however, exists on the joint application of heating and electrokinetic approaches on perfluorooctanoic acid (PFOA) transport in porous media. Here, we investigated electrokinetic PFOA transport in zeolite-filled percolation columns at varying temperatures. Variations of pseudo-second-order kinetic constants (kPSO) were correlated to the liquid viscosity variations (η) and elctroosmotic flow velocities (vEOF). Applying DC fields and elevated temperature significantly (>37%) decreased PFOA sorption to zeolite. A good correlation between η, vEOF, and kPSO was found and used to develop an approach interlinking the three parameters to predict the joint effects of DC fields and temperature on PFOA sorption kinetics. These findings may give rise to future applications for better tailoring PFOA transport in environmental biotechnology.

Spatiotemporal dynamic temperature variation dominated by ion behaviors during groundwater remediation using direct current

Direct current (DC) electric field has shown promising performance in contaminated site remediation, in which the Joule heating effect plays an important role but has been previously underappreciated. This study focuses on the spatiotemporal characteristics and mechanism of temperature change in heterogeneous porous media with applied DC. The heating process can be divided into four phases: preferential heating of the low permeability zone (LPZ), rapid heating in the middle region, temperature drop and hot zone shift, and reheating. The dynamic ion behaviors with complex interplays among reactions, electrokinetic-driven migration, and mixed convection induced an uneven redistribution of ions and dominated the heating rate and temperature distribution. The concentration of major ions near the pH jump decreased to 1% of the initial value, even though ions were continuously pumped into the heating zone. This ion depletion caused a drop in current, heating rate, and temperature. Here ions cannot be delivered rapidly into the ion-depleted zone by electromigration due to the potential flattening in the surrounding region. The presence of LPZ intensified the nonuniformity of ion redistribution, where a regional focusing of water-soluble ions was observed, and weakened the temperature rebound compared with that using homogeneous sand. These results provide a new perspective on the regulation of DC heating in site remediation.

Effects of Temperature and DC Electric Fields on Perfluorooctanoic Acid Sorption Kinetics to Activated Carbon

Sorption to activated carbon is a common approach to reducing environmental risks of waterborne perfluorooctanoic acid (PFOA), while effective and flexible approaches to PFOA sorption are needed. Variations in temperature or the use of electrokinetic phenomena (electroosmosis and electromigration) in the presence of external DC electric fields have been shown to alter the contaminant sorption of contaminants. Their role in PFOA sorption, however, remains unclear. Here, we investigated the joint effects of DC electric fields and the temperature on the sorption of PFOA on activated carbon. Temperature-dependent batch and column sorption experiments were performed in the presence and absence of DC fields, and the results were evaluated by using different kinetic sorption models. We found an emerging interplay of DC and temperature on PFOA sorption, which was linked via the liquid viscosity (η) of the electrolyte. For instance, the combined presence of a DC field and low temperature increased the PFOA loading up to 38% in 48 h relative to DC-free controls. We further developed a model that allowed us to predict temperature- and DC field strength-dependent electrokinetic benefits on the drivers of PFOA sorption kinetics (i.e., intraparticle diffusivity and the film mass transfer coefficient). Our insights may give rise to future DC- and temperature-driven applications for PFOA sorption, for instance, in response to fluctuating PFOA concentrations in contaminated water streams.

Interplay of physico-chemical and mechanical bacteria-surface interactions with transport processes controls early biofilm growth: A review

Biofilms initiate when bacteria encounter and are retained on surfaces. The surface orchestrates biofilm growth through direct physico-chemical and mechanical interactions with different structures on bacterial cells and, in turn, through its influence on cell-cell interactions. Individual cells respond directly to a surface through mechanical or chemical means, initiating "surface sensing" pathways that regulate gene expression, for instance producing extra cellular matrix or altering phenotypes. The surface can also physically direct the evolving colony morphology as cells divide and grow. In either case, the physico-chemistry of the surface influences cells and cell communities through mechanisms that involve additional factors. For instance the numbers of cells arriving on a surface from solution relative to the generation of new cells by division depends on adhesion and transport kinetics, affecting early colony density and composition. Separately, the forces experienced by adhering cells depend on hydrodynamics, gravity, and the relative stiffnesses and viscoelasticity of the cells and substrate materials, affecting mechanosensing pathways. Physical chemistry and surface functionality, along with interfacial mechanics also influence cell-surface friction and control colony morphology, in particular 2D and 3D shape. This review focuses on the current understanding of the mechanisms in which physico-chemical interactions, deriving from surface functionality, impact individual cells and cell community behavior through their coupling with other interfacial processes.

Phage co-transport with hyphal-riding bacteria fuels bacterial invasion in a water-unsaturated microbial model system

Nonmotile microorganisms often enter new habitats by co-transport with motile microorganisms. Here, we report that also lytic phages can co-transport with hyphal-riding bacteria and facilitate bacterial colonization of a new habitat. This is comparable to the concept of biological invasions in macroecology. In analogy to invasion frameworks in plant and animal ecology, we tailored spatially organized, water-unsaturated model microcosms using hyphae of Pythium ultimum as invasion paths and flagellated soil-bacterium Pseudomonas putida KT2440 as carrier for co-transport of Escherichia virus T4. P. putida KT2440 efficiently dispersed along P. ultimum to new habitats and dispatched T4 phages across air gaps transporting ≈0.6 phages bacteria⁻¹. No T4 displacement along hyphae was observed in the absence of carrier bacteria. If E. coli occupied the new habitat, T4 co-transport fueled the fitness of invading P. putida KT2440, while the absence of phage co-transport led to poor colonization followed by extinction. Our data emphasize the importance of hyphal transport of bacteria and associated phages in regulating fitness and composition of microbial populations in water-unsaturated systems. As such co-transport seems analogous to macroecological invasion processes, hyphosphere systems with motile bacteria and co-transported phages could be useful models for testing hypotheses in invasion ecology.

Mycelia-Assisted Isolation of Non-Host Bacteria Able to Co-Transport Phages

Recent studies have demonstrated that phages can be co-transported with motile non-host bacteria, thereby enabling their invasion of biofilms and control of biofilm composition. Here, we developed a novel approach to isolate non-host bacteria able to co-transport phages from soil. It is based on the capability of phage-carrying non-host bacteria to move along mycelia out of soil and form colonies in plaques of their co-transported phages. The approach was tested using two model phages of differing surface hydrophobicity, i.e., hydrophobic Escherichia virus T4 (T4) and hydrophilic Pseudoalteromonas phage HS2 (HS2). The phages were mixed into soil and allowed to be transported by soil bacteria along the mycelia of Pythium ultimum. Five phage-carrying bacterial species were isolated (Viridibacillus sp., Enterobacter sp., Serratia sp., Bacillus sp., Janthinobacterium sp.). These bacteria exhibited phage adsorption efficiencies of ≈90–95% for hydrophobic T4 and 30–95% for hydrophilic HS2. The phage adsorption efficiency of Viridibacillus sp. was ≈95% for both phages and twofold higher than T4-or HS2-adsorption to their respective hosts, qualifying Viridibacillus sp. as a potential super carrier for phages. Our approach offers an effective and target-specific way to identify and isolate phage-carrying bacteria in natural and man-made environments.

Assessment of a Weak Mode of Bacterial Adhesion by Applying an Electric Field

Microbial attachment to surfaces is ubiquitous in nature. Most species of bacteria attach and adhere to surfaces via special appendages such as pili and fimbriae, the roles of which have been extensively studied. Here, we report an experiment on pilus-less mutants of Caulobacter crescentus weakly attached to polyethylene surface. We find that some individual cells transiently but repeatedly adhere to the surface in a stick-slip fashion in the presence of an electric field parallel to the surface. These bacteria move significantly slower than the unattached ones in the same field of view undergoing electrophoretic motion. We refer this behavior of repeated and transient attachment as “quasi-attachment”. The speed of the quasi-attached bacteria exhibits large variation, frequently dropping close to zero for short intervals of time. We propose a polymeric tethering model to account for the experimental findings. This study sheds light on bacteria–surface interaction, which is significant in broader contexts such as infection and environmental control.

Zeta potential beyond materials science: Applications to bacterial systems and to the development of novel antimicrobials

This review summarizes the theory of zeta potential (ZP) and the most relevant data about how it has been used for studying bacteria. We have especially focused on the discovery and characterization of novel antimicrobial compounds. The ZP technique may be considered an indirect tool to estimate the surface potential of bacteria, a physical characteristic that is key to maintaining optimal cell function. For this reason, targeting the bacterial surface is of paramount interest in the development of new antimicrobials. Surface-acting agents have been found to display a remarkable bactericidal effect and have simultaneously revealed a low tendency to trigger resistance. Changes in the bacterial surface as a result of various processes can also be followed by ZP measurements. However, due to the complexity of the bacterial surface, some considerations regarding the assessment of ZP must first be taken into account. Evidence on the application of ZP measurements to the characterization of bacteria and biofilm formation is presented next. We finally discuss the feasibility of using the ZP technique to assess antimicrobial-induced changes in the bacterial surface. Among these changes are those related to the interaction of the agent with different components of the cell envelope, membrane permeabilization, and loss of viability.

Electrokinetic Delivery of Reactants: Pore Water Chemistry Controls Transport, Mixing, and Degradation

Electrokinetics in porous media entails complex transport processes occurring upon the establishment of electric potential gradients, with a wide spectrum of environmental applications ranging from remediation of contaminated sites to biotechnology. The resulting electric forces cause the movement of pore water ions in opposite directions, leading to charge interactions that can affect the distribution of charged species in the domain. Here, we demonstrate that changes in chemical conditions, such as the concentration of a background electrolyte in the pore water of a saturated porous medium, exert a key control on the macroscopic transport of charged tracers and reactants. The difference in concentration between the background electrolyte and an injected solute can limit or enhance the reactant delivery, cause nonintuitive patterns of concentration distribution, and ultimately control mixing and degradation kinetics. With nonreactive and reactive electrokinetic transport experiments combined with process-based modeling, we show that microscopic charge interactions in the pore water play a crucial role on the transport of injected plumes and on the mechanisms and rate of both physical and chemical processes at larger, macroscopic scales. Our results have important implications on electrokinetic transport in porous media and may greatly impact injection and delivery strategies in a wide range of applications, including in situ remediation of soil and groundwater.

Effects of Electrokinetic Phenomena on Bacterial Deposition Monitored by Quartz Crystal Microbalance with Dissipation Monitoring

Bacterial deposition is the first step in the formation of microbial biofilms in environmental technology, and there is high interest in controlling such deposition. Earlier work indicated that direct current (DC) electric fields could influence bacterial deposition in percolation columns. Here, a time-resolved quartz crystal microbalance with dissipation monitoring (QCM-D) and microscopy-based cell counting were used to quantify DC field effects on the deposition of bacterial strains Pseudomonas putida KT2440 and Pseudomonas fluorescens LP6a at varying electrolyte concentrations and weak electric field strengths (0-2 V cm^-1). DC-induced frequency shifts (Δf), dissipation energy (ΔD), and ratios thereof (Δf/ΔD) proved as good indicators of the rigidity of cell attachment. We interpreted QCM-D signals using a theoretical approach by calculating the attractive DLVO-force and the shear and drag forces acting on a bacterium near collector surfaces in a DC electric field. We found that changes in DC-induced deposition of bacteria depended on the relative strengths of electrophoretic drag and electro-osmotic shear forces. This could enable the prediction and electrokinetic control of microbial deposition on surfaces in natural and manmade ecosystems.

Change in soil ion content and soil water-holding capacity during electro-bioremediation of petroleum contaminated saline soil

This study investigated changes in soil ion content and soil water-holding capacity during electro-bioremediation (EK-Bio) of petroleum contaminated saline soil (ion content of 3.92 g/kg). The results indicated that the soil ions surrounded the electrodes with increasing time, thus changing the soil water-holding capacity. According to the Van Genuchten model fitting results, the soil residual water content (θr) increased with the soil ion content, which represented a capacity decrease of the soil water supply. At the end of the EK-Bio experiment, the θr values in the soil near (site A) and far from (site B) the electrodes were 19.1 % and 12.1 %, where the soil ion content was 7.92 g/kg and 0.55 g/kg, respectively. The ion aggregation process significantly impacted the growth of soil microbial. The bacteria numbers decreased when the soil ion content was high (7.41 g/kg, site A) and low (0.84 g/kg, site B) after 70 days of treatment. The applied electric field significantly enhanced the bioremediation efficiency. However, the biodegradation promotion effect was the weakest at site A. The synergistic effect between the applied electric field and degrading bacteria was delayed.

Electrokinetic effects on the interaction of phenanthrene with geo-sorbents

Interactions with solid matrices control the persistence and (bio-)degradability of hydrophobic organic chemicals (HOC). Approaches influencing the rate or extent of HOC interactions with matrices are thus longed for. When a direct current (DC) electric field is applied to a matrix immersed in an ionic solution, it invokes transport processes including electromigration, electrophoresis, and electroosmotic flow (EOF). EOF is the surface charge-induced movement of pore fluids. It has the potential to mobilize uncharged organic contaminants and, hence, to influence their interactions with sorbing geo-matrices (i.e. geo-sorbents). Here, we assessed the effects of weak DC electric fields on sorption and desorption of phenanthrene (PHE) in various mineral and carbonaceous geo-sorbents. We found that DC fields significantly changed the rates and extent of PHE sorption and desorption as compared to DC-free controls. A distinct correlation between the Gibbs free energy change (ΔG°) and electrokinetic effects such as the EOF velocity was observed; in case of mineral sorbents EOF limited (or even inhibited) PHE sorption and increased its desorption. In strongly sorbing carbonaceous geo-sorbents, however, EOF significantly increased the rates of PHE sorption and reduced PHE desorption by > 99% for both activated charcoal and exfoliated graphite. Based on our findings, an approach linking ΔG° and EOF velocity was developed to estimate DC-induced PHE sorption and desorption benefits on mineral and carbonaceous sorbents. We conclude that such kinetic regulation gives rise to future technical applications that may allow modulating sorption processes e.g. in response to fluctuating sorbate concentrations in contaminated water streams.

Bacteria-activated chlorin e6 ionic liquid based on cation and anion dual-mode antibacterial action for enhanced photodynamic efficacy

With the increase in antibiotic resistance, the development of new antibacterial agents is urgent. Photosensitizers with no detectable resistance are promising antibacterial agents. However, most photosensitizers are insoluble, structurally unstable and ineffective against Gram-negative bacteria due to their negatively charged cell wall that hinder their use. In this study, a novel bacteria-activated photosensitizer ionic liquid was designed and assembled to improve the solubility, stability and antibacterial ability of photodynamic therapy. The cation 1-vinyl-3-dodecyl imidazole has been designed, which has strong binding energy with the major constituent of the cell wall. The anion selected was chlorin e6 (Ce6) since it could respond to the acidic microenvironment of bacterial infection. The Ce6 ionic liquid (Ce6-IL) composed of 1-vinyl-3-dodecyl imidazole and Ce6 not only exhibited bacteria-activated ability because its cation could firmly bond with peptidoglycan in the cell wall, but also had excellent acid responsive ability due to the protonation reaction of COO- in its anion. The binding energy of the cation with peptidoglycan was calculated via molecular dynamics simulation, and the pH-responsive behavior of Ce6-IL was verified via HR-MS. The surface potential, mechanical property, morphology and uptake rate results indicated that the cation could destroy the cell wall and promote the anion Ce6 to enter the bacteria. Due to the dual-mode antibacterial action of its cation and anion, Ce6-IL was more effective against Gram-negative and Gram-positive bacteria than Ce6 alone and had wide-spectrum antibacterial ability. The in vitro studies showed that the IC50 of Ce6-IL against E. coli and S. aureus was reduced by 100 and 10 times, respectively. Furthermore, the in vivo studies indicated that Ce6-IL was more effective for eliminating bacterial infection and could accelerate wound healing. The compatibility test showed that Ce6-IL had low toxicity and exhibited excellent biocompatibility.