Carbonic Anhydrase Enzyme-MOFs Composite with a Superior Catalytic Performance to Promote CO2 Absorption into Tertiary Amine Solution

Alumina-Supported Porphyrin Zinc as a Carbonic Anhydrase Mimic: Enhanced CO2 Hydration Catalysis

Zinc porphyrin is a promising carbonic anhydrase (CA) mimic for promoting CO2 absorption, but its application is hindered by poor dispersibility in absorption solutions. To address these challenges, we developed a strategy to impregnate zinc porphyrin on an γ-Al2O3 carrier. The hydrophilic surface groups and porous structure of γ-Al2O3 were expected to enhance both the hydrophilicity and stability of zinc porphyrin. To verify its feasibility, zinc tetraphenylporphyrin (ZnTPP) was chosen as the representative to synthesize ZnTPP/Al2O3. Characterizations showed that ZnTPP could be loaded into the pores of γ-Al2O3 in a highly dispersed state. Also, ZnTPP/Al2O3 could be uniformly dispersed in the absorption liquid, effectively exposing the Zn2+ active sites and reducing diffusion resistance. CO2 absorption experiments revealed that ZnTPP/Al2O3 significantly enhanced CO2 absorption in water, 20 wt % K2CO3, and 20 wt % monoethanolamine (MEA) solutions, far outperforming original ZnTPP. Density functional theory (DFT) calculations further elucidated the interaction mechanisms, showing that oxygen atoms on γ-Al2O3 stabilize ZnTPP by forming van der Waals and coordination bonds with Zn2+ active sites. Additionally, these oxygen atoms donate electrons to Zn2+, enhancing its catalytic activity. These findings highlight the effectiveness of this strategy and provide a promising pathway for optimizing other CA-mimics for CO2 capture applications.

Mass Transfer-Reaction Modeling of CO2 Capture Mediated by Immobilized Carbonic Anhydrase Enzyme on Multiscale Supporting Structures

Immobilized carbonic anhydrase (CA) enzyme enhances CO2 absorption in potassium carbonate (PC) solutions, offering an attractive alternative to amine-based processes for postcombustion carbon capture. In this work, the cross-scale models of mass transfer coupled with absorption reactions were developed to evaluate the structural impacts of different enzyme immobilization supporting materials, including nonporous nanoparticle carriers (nano scale), porous microparticle carriers (micro scale), and fixed packing structures (macro scale), on the rate enhancement effect of the immobilized CA. Increasing enzyme activity was demonstrated to be an effective approach to promoting the CO2 absorption rate; however, there was an upper limit due to the limitation of CO2 diffusion in the liquid phase, either adjacent to the gas-liquid interface or the liquid-solid interface. The size of particle carriers is another critical factor affecting the CO2 absorption rate. Only nanoscale particle carriers could directly enter the region within the liquid film of mass transfer, thus providing effective enzymatic enhancement. When the particle size was reduced to below 0.35 μm, the PC promoted with the immobilized CA outperformed the benchmark monoethanolamine solution. The solid-side mass transfer resistance became dominant as the particle size decreased. Modeling results also showed that using stagnant packing materials in a fixed bed as a supporting structure for CA immobilization would be impractical for accelerating CO2 absorption.

Implications of non-native metal substitution in carbonic anhydrase - engineered enzymes and models

The enzyme carbonic anhydrase has been intensely studied over decades as a means to understand the role of zinc in hydrating CO2. The naturally occurring enzyme has also been immobilized on distinct heterogeneous platforms, which results in a different hybrid class of catalysts that are useful for the adsorption and hydration of CO2. However, the reusability and robustness of such natural and immobilized systems are substantially affected when tested under industrial conditions, such as high temperature and high flow rate. This led to the generation of model systems in the form of metal-coordination complexes, metal-organic frameworks, metallo-peptide self-assembled supramolecules and nanomaterials that mimic the primary, and, to some extent, secondary coordination sphere of the active site of the natural carbonic anhydrase enzymes. Furthermore, the effects of zinc-substitution by other relevant transition metals in both the naturally occurring enzymes and model systems has been reported. It has been observed that some other transition metal ions in the active site of carbonic anhydrase and its models can also accomplish similar activity, established by various reaction probes and ideas. Herein, we present a comprehensive highlight about substituting zinc in the active site of the modified enzymes and its biomimetic model systems with non-native metal ions and review how they affect the structural orientation and reactivity towards CO2 hydration. In addition, the utility of artificially engineered carbonic anhydrases towards a number of non-natural reactions is also discussed.

Biomimetic CO2 Capture Unlocked through Enzyme Mining: Discovery of a Highly Thermo- and Alkali-Stable Carbonic Anhydrase

Taking immediate action to combat the urgent threat of CO2-driven global warming is crucial for ensuring a habitable planet. Decarbonizing the industrial sector requires implementing sustainable carbon-capture technologies, such as biomimetic hot potassium carbonate capture (BioHPC). BioHPC is superior to traditional amine-based strategies due to its eco-friendly nature. This innovative technology relies on robust carbonic anhydrases (CAs), enzymes that accelerate CO2 hydration and endure harsh industrial conditions like high temperature and alkalinity. Thus, the discovery of highly stable CAs is crucial for the BioHPC technology advancement. Through high-throughput bioinformatics analysis, we identified a highly thermo- and alkali-stable CA, termed CA-KR1, originating from a metagenomic sample collected at a hot spring in Kirishima, Japan. CA-KR1 demonstrates remarkable stability at high temperatures and pH, with a half-life of 24 h at 80 °C and retains activity and solubility even after 30 d in a 20% (w/v) K2CO3/pH 11.5 solution─a standard medium for HPC. In pressurized batch reactions, CA-KR1 enhanced CO2 absorption by >90% at 90 °C, 20% K2CO3, and 7 bar. To our knowledge, CA-KR1 constitutes the most resilient CA biocatalyst for efficient CO2 capture under HPC-relevant conditions, reported to date. CA-KR1 integration into industrial settings holds great promise in promoting efficient BioHPC, a potentially game-changing development for enhancing carbon-capture capacity toward industrial decarbonization.

Synthesis of a Zn(II)-2-aminoimidazole Framework as an Efficient Carbonic Anhydrase Mimic

Carbonic anhydrase (CA) plays a crucial role in the CO2 capture processes by catalyzing the hydration of CO2. In this study, we synthesized a bioinspired carbonic anhydrase Zn-MOF (metal-organic framework) incorporating 2-aminoimidazole and Zn2+ as initial constituents. The synthesized Zn-MOF exhibited promising potential for efficiently catalyzing the CO2 hydration. Structural analyses such as SEM, XRD, and BET confirmed that the Zn-MOF crystal consisted of stacked grains with an average size of approximately 36 nm, forming a micron-sized spherical structure. Functionally, Zn-MOF exhibited effective catalytic activity toward both CO2 hydration and ester hydrolysis. The introduction of amino groups significantly enhanced the esterase activity of Zn-MOF to 0.28 U/mg at ambient temperature, which was twice that of ZIF-8. Furthermore, the introduction of amino groups resulted in remarkable hydrothermal stability, with the esterase activity reaching 0.72 U/mg after undergoing hydrothermal treatment at 80 °C for 12 h. Additionally, Zn-MOF exhibited enhanced capability in CO2 hydration at a pH value exceeding 8.5. After six repeated uses, ZIF-8 and Zn-MOF retained approximately 68 and 65% of their initial enzyme activity, respectively, underscoring the potential practical applicability of Zn-MOF in industrial CO2 capture processes. This work showcases the development of a novel Zn-MOF crystal as an efficient CA mimic, effectively emulating the active sites of natural CA using 2-aminoimidazole as a coordinating ligand for Zn2+ coordination. These findings not only advance the field of innovative enzyme mimics but also pave the way for further exploration of industrial CO2 capture catalysts.

Enzyme-Immobilized Porous Crystals for Environmental Applications

Developing efficient technologies to eliminate or degrade contaminants is paramount for environmental protection. Biocatalytic decontamination offers distinct advantages in terms of selectivity and efficiency; however, it still remains challenging when applied in complex environmental matrices. The main challenge originates from the instability and difficult-to-separate attributes of fragile enzymes, which also results in issues of compromised activity, poor reusability, low cost-effectiveness, etc. One viable solution to harness biocatalysis in complex environments is known as enzyme immobilization, where a flexible enzyme is tightly fixed in a solid carrier. In the case where a reticular crystal is utilized as the support, it is feasible to engineer next-generation biohybrid catalysts functional in complicated environmental media. This can be interpreted by three aspects: (1) the highly crystalline skeleton can shield the immobilized enzyme against external stressors. (2) The porous network ensures the high accessibility of the interior enzyme for catalytic decontamination. And (3) the adjustable and unambiguous structure of the reticular framework favors in-depth understanding of the interfacial interaction between the framework and enzyme, which can in turn guide us in designing highly active biocomposites. This Review aims to introduce this emerging biocatalysis technology for environmental decontamination involving pollutant degradation and greenhouse gas (carbon dioxide) conversion, with emphasis on the enzyme immobilization protocols and diverse catalysis principles including single enzyme catalysis, catalysis involving enzyme cascades, and photoenzyme-coupled catalysis. Additionally, the remaining challenges and forward-looking directions in this field are discussed. We believe that this Review may offer a useful biocatalytic technology to contribute to environmental decontamination in a green and sustainable manner and will inspire more researchers at the intersection of the environment science, biochemistry, and materials science communities to co-solve environmental problems.

Use of deep eutectic solvents in environmentally-friendly dye-sensitized solar cells and their physicochemical properties: a brief review

A novel way to mitigate the greenhouse effect is to use dye-sensitized solar cells (DSSCs) to convert carbon dioxide from the air into useful products, such as hydrocarbons, which can also store energy from the sun, a plentiful, clean, and safe resource. The conversion of CO2 can help reduce the impacts of greenhouse gas emissions that contribute to global warming. However, there is a major obstacle in using DSSCs, since many solar devices operate with organic electrolytes, producing pollutants including toxic substances. Therefore, a key research area is to find new eco-friendly electrolytes that can effectively dissolve carbon dioxide. One option is to use deep eutectic solvents (DESs), which are potential substitutes for ionic liquids (ILs) and have similar advantages, such as being customizable, economical, and environmentally friendly. DESs are composed of low-cost materials and have very low toxicity and high biodegradability, making them suitable for use as electrolytes in DSSCs, within the framework of green chemistry. The purpose of this brief review is to explore the existing knowledge about how CO2 dissolves in DESs and how these solvents can be used as electrolytes in solar devices, especially in DSSCs. The physical and chemical properties of the DESs are described, and areas are suggested where further research should be focused.

Co-culturing microalgae with endophytic bacteria from bamboo for efficient nutrient and heavy metal removal coupling with biogas upgrading

The construction of dominant algal species and bacterial strains in algal treatment technology was crucial for pollutant removal. In order to enhance the purification capability of microalgae toward heavy metals in water as well as biogas slurry and biogas, symbiotic systems were respectively constructed using Chlorella vulgaris and two different endogenous bacteria (microalgal endophytic bacteria S395-2 and plant endophytic bacteria BEB7). The results demonstrated that the endogenous bacteria (S395-2 and BEB7) effectively promote the growth, biomass yield, photosynthetic activity, and carbonic anhydrase activity of microalgae. Additionally, BEB7 exhibited superior promotion effects on microalgae compared to S395-2. Moreover, the BEB7-microalgae co-cultivation system not only efficiently removed heavy metals from water but also effectively purified the nutrients and CO2 in biogas slurry. The optimal effect was observed when the ratio of BEB7 to microalgae was 10:1. This study has established a solid theoretical foundation for the application of microalgae in pollutant purification. PRACTITIONER POINTS: Endogenous bacteria effectively promoted microalgal performance. The optimal ratio of BEB7 to microalgae was 10:1. Chlorella vulgaris-BEB7 showed the best removal performance.

Synthesis and performance analysis of zeolitic imidazolate frameworks for CO2 sensing applications

In this paper, we investigate the potential use of Zeolitic Imidazolate Frameworks (ZIF-8) as a sensing material for CO2 detection. Three synthesis techniques are considered for the preparation of ZIF-8, namely room temperature, microwave-assisted, and ball milling. The latter is a green and facile alternative for synthesis with its solvent-free, room-temperature operation. In addition, ball milling produces ZIF-8 samples with superior CO2 adsorption and detection characteristics, as concluded from fluorescence measurements. Characterization tests including X-ray diffraction (XRD), Fourier transform infrared (FTIR), Thermogravimetric analysis (TGA), Field emission scanning electron microscopy (FE-SEM) and Energy-dispersive X-ray spectroscopy (EDS) are conducted to inspect the structural morphology, the thermal stability, and elements content of the ZIF-8 samples obtained from the different aforementioned synthesis techniques. The characterization tests revealed the appearance of a new phase of ZIF-8 which is ZIF-L when deploying the ball milling technique with different structure, morphology, response to CO2 exposure and thermal stability when compared to its counterparts. Fluorescence measurements are carried out to evaluate the limit of detection (LOD), selectivity, and recyclability of the different ZIF-8 samples. The LOD of the ZIF-8 sample synthesized based on ball milling synthesis technique is 815.2 ppm, while LODs of the samples obtained from microwave and room temperature-based synthesis techniques are 1780.6 ppm and 723.8 ppm, respectively. This indicates that the room temperature and ball milling produced MOFs have comparable LODs. However, the room temperature procedure requires the use of a harmful solvent. The range of LOD demonstrates the suitable use of ZIF-8 for indoor air quality monitoring and other industrial applications.

Reversible CO2 Fixation and Release by a Trinuclear Zn(II) Cryptate Complex and Operando Analysis of the Complex Structure

Metal complexes inspired by carbonic anhydrase (CA), which is a metalloenzyme containing Zn(II), have been investigated as alternatives for CO2 fixation systems operating under ambient temperature and pressure conditions. In this study, we designed a trinuclear Zn(II) cryptate complex (Zn3 L) and demonstrated rapid CO2 fixation with carbonation of CO2 using Zn3 L. The CO2 fixation performance of Zn3 L surpassed that of a standard CO2 absorbent, KOH(aq) solution, under conditions of the same solute concentration. In addition, the reaction achieved operation without support addition of base, which has been often required in systems of CA-inspired complexes. Fixed CO2 was released by protonating polyazacryptate ligand (L) and breaking the complex structure, and deprotonation of L induced the reconstruction of Zn3 L, allowing it to refix CO2 . This reaction mechanism was proposed based on the analysis of operando extended X-ray absorption fine structure spectroscopy. Zn3 L also demonstrated the ability to capture dilute CO2 from air, and the volume of CO2 captured by Zn3 L was approximately 2.6 times that captured by the KOH(aq) solution. Our Zn3 L exhibited three valuable properties: rapid CO2 fixation without a base, reversibility, and ability to capture dilute CO2 ; thus Zn3 L is a promising candidate as CO2 fixatives.

Direct Biocatalytic Processes for CO2 Capture as a Green Tool to Produce Value-Added Chemicals

Direct biocatalytic processes for CO₂ capture and transformation in value-added chemicals may be considered a useful tool for reducing the concentration of this greenhouse gas in the atmosphere. Among the other enzymes, carbonic anhydrase (CA) and formate dehydrogenase (FDH) are two key biocatalysts suitable for this challenge, facilitating the uptake of carbon dioxide from the atmosphere in complementary ways. Carbonic anhydrases accelerate CO₂ uptake by promoting its solubility in water in the form of hydrogen carbonate as the first step in converting the gas into a species widely used in carbon capture storage and its utilization processes (CCSU), particularly in carbonation and mineralization methods. On the other hand, formate dehydrogenases represent the biocatalytic machinery evolved by certain organisms to convert CO₂ into enriched, reduced, and easily transportable hydrogen species, such as formic acid, via enzymatic cascade systems that obtain energy from chemical species, electrochemical sources, or light. Formic acid is the basis for fixing C₁-carbon species to other, more reduced molecules. In this review, the state-of-the-art of both methods of CO₂ uptake is assessed, highlighting the biotechnological approaches that have been developed using both enzymes.

Carbonic anhydrase as a tool to mitigate global warming

The global average temperature breaks the record every year, and this unprecedented speed at which it is unfolding is causing serious climate change which in turn impacts the lives of humans and other living organisms. Thus, it is imperative to take immediate action to limit global warming. Increased CO2 emission from the industrial sector that relies on fossil fuels is the major culprit. Mitigating global warming is an uphill battle that involves an integration of technologies such as switching to renewable energy, increasing the carbon sink capacity, and implementing carbon capture and sequestration (CCS) on major sources of CO2 emissions. Among all these methods, CCS is globally accepted as a potential technology to address this climate change. CCS using carbonic anhydrase (CA) is gaining momentum due to its advantages over other conventional CCS technologies. CA is a metalloenzyme that catalyses a fundamental reaction for life, i.e. the interconversion of bicarbonate and protons from carbon dioxide and water. The practical application of CA requires stable CAs operating under harsh operational conditions. CAs from extremophilic microbes are the potential candidates for the sequestration of CO2 and conversion into useful by-products. The soluble free form of CA is expensive, unstable, and non-reusable in an industrial setup. Immobilization of CA on various support materials can provide a better alternative for application in the sequestration of CO2. The present review provides insight into several types of CAs, their distinctive characteristics, sources, and recent developments in CA immobilization strategies for application in CO2 sequestration.

Carbonic Anhydrase-Embedded ZIF-8 Electrospun PVA Fibers as an Excellent Biocatalyst Candidate

There is a growing concern that the increasing concentration of CO₂ in the atmosphere contributes to a potential negative impact on global climate change. To deal with this problem, developing a set of innovative, practical technologies is essential. In the present study, maximizing the CO₂ utilization and precipitation as CaCO₃ was evaluated. In this manner, bovine carbonic anhydrase (BCA) was embedded into the microporous zeolite imidazolate framework, ZIF-8, via physical absorption and encapsulation. Running as crystal seeds, these nanocomposites (enzyme-embedded MOFs) were in situ grown on the cross-linked electrospun polyvinyl alcohol (CPVA). The prepared composites displayed much higher stability against denaturants, high temperatures, and acidic media than free BCA, and BCA immobilized into or on ZIF-8. During 37 days of storage period study, BCA@ZIF-8/CPVA and BCA/ZIF-8/CPVA maintained more than 99 and 75% of their initial activity, respectively. The composition of BCA@ZIF-8 and BCA/ZIF-8 with CPVA improved stability for consecutive usage in recovery reactions, recycling easiness, and greater control over the catalytic process. The amounts of calcium carbonate obtained by one mg each of fresh BCA@ZIF-8/CPVA and BCA/ZIF-8/CPVA were 55.45 and 49.15 mg, respectively. The precipitated calcium carbonate by BCA@ZIF-8/CPVA reached 64.8% of the initial run, while this amount was 43.6% for BCA/ZIF-8/CPVA after eight cycles. These results indicated that the BCA@ZIF-8/CPVA and BCA/ZIF-8/CPVA fibers could be efficiently applied to CO₂ sequestration.

A comprehensive review on bio-mimicked multimolecular frameworks and supramolecules as scaffolds for enzyme immobilization

Immobilization depicts a propitious route to optimize the catalytic performances, efficient recovery, minimizing autocatalysis, and also augment the stabilities of enzymes, particularly in unnatural environments. In this opinion, supramolecules and multimolecular frameworks have captivated immense attention to achieve profound controllable interactions between enzyme molecules and well-defined natural or synthetic architectures to yield protein bioconjugates with high accessibility for substrate binding and enhanced enantioselectivities. This scholastic review emphasizes the possibilities of associating multimolecular complexes with biological entities via several types of interactions, namely covalent interactions, host-guest complexation, π - π ${\rm{\pi }}-{\rm{\pi }}$ interactions, intra/inter hydrogen bondings, electrostatic interactions, and so forth offers remarkable applications for the modulations of enzymes. The potential synergies between artificial supramolecular structures and biological systems are the primary concern of this pedagogical review. The majority of the research primarily focused on the dynamic biomolecule-responsive supramolecular assemblages and multimolecular architectures as ideal platforms for the recognition and modulation of proteins and cells. Embracing sustainable green demeanors of enzyme immobilizations in a quest to reinforce site-selectivity, catalytic efficiency, and structural integrality of enzymes are the contemporary requirements of the biotechnological sectors that instigate the development of novel biocatalytic systems.

An iron-based metal-organic framework as a novel dispersive solid-phase extraction sorbent for the efficient adsorption of tetrabromobisphenol A from environmental water samples

For environmental safety, it is important to establish a simple, rapid, and sensitive method for emerging pollutants. Here, a dispersive solid-phase extraction (d-SPE) method based on an iron-based metal-organic framework (Fe-MIL-88-NH₂) combined with high-performance liquid chromatography (HPLC) was developed for tetrabromobisphenol A (TBBPA) in water samples. Fe-MIL-88-NH₂ was synthesized using a solvothermal method and completely characterized. Fe-MIL-88-NH₂ had good water stability and gave a maximum adsorption capacity of 40.97 mg g^-1 for TBBPA. The adsorption of TBBPA on Fe-MIL-88-NH₂ followed Langmuir adsorption models and a pseudo-second-order kinetic model. The bromine ion and the hydroxyl group of TBBPA could form strong hydrogen bond interactions with the amino protons around the cavity of Fe-MIL-88-NH₂, which was in accord with the molecular simulation calculations. Furthermore, several important d-SPE parameters were optimized, such as the amount of materials, extraction time, pH, ionic strength, elution solvent type, and volume. The established method showed good linearity in the concentration range of 0.005-100 μg g^-1 (r² ≥ 0.9996). This method's limits of detection (LOD) and quantification (LOQ) were 0.001 μg g^-1 and 0.005 μg g^-1, respectively. The recoveries in spiked water samples ranged from 87.5% to 104.9%. The proposed method was applied successfully to detect TBBPA in environmental water samples.

Microbial carbonic anhydrase mediated carbon capture, sequestration & utilization: A sustainable approach to delivering bio-renewables

In the recent scenario, anthropogenic interventions have alarmingly disrupted climatic conditions. The persistent change in the climate necessitates carbon neutrality. Efficient ways of carbon capture and sequestration could be employed for sustainable product generation. Carbonic anhydrase (CA) is an enzyme that reversibly catalyzes the conversion of carbon dioxide to bicarbonate ions, further utilized by cells for metabolic processes. Hence, utilizing CA from microbial sources for carbon sequestration and the corresponding delivery of bio-renewables could be the eco-friendly approach. Consequently, the microbial CA and amine-based carbon capture chemicals are synergistically applied to enhance carbon capture efficiency and eventual utilization. This review comprehends recent developments coupled with engineering techniques, especially in microbial CA, to create integrated systems for CO₂ sequestration. It envisages developing sustainable approaches towards mitigating environmental CO₂ from industries and fossil fuels to generate bio-renewables and other value-added chemicals.

Enzyme-immobilized metal-organic frameworks: From preparation to application

As a class of widely used biocatalysts, enzymes possess advantages including high catalytic efficiency, strong specificity and mild reaction condition. However, most free enzymes have high requirements on the reaction environment and are easy to deactivate. Immobilization of enzymes on nanomaterial-based substrates is a good way to solve this problem. Metal-organic framework (MOFs), with ultra-high specific surface area and adjustable porosity, can provide a large space to carry enzymes. And the tightly surrounded protective layer of MOFs can stabilize the enzyme structure to a great extent. In addition, the unique porous network structure enables selective mass transfer of substrates and facilitates catalytic processes. Therefore, these enzyme-immobilized MOFs have been widely used in various research fields, such as molecule/biomolecule sensing and imaging, disease treatment, energy and environment protection. In this review, the preparation strategies and applications of enzymes-immobilized MOFs are illustrated and the prospects and current challenges are discussed.

Two-Dimensional Zeolitic Imidazolate Framework ZIF-L: A Promising Catalyst for Polymerization

Here, for the first time, a 2D and leaf-like zeolitic imidazolate framework (ZIF-L) is reported for the synthesis of ultrahigh molecular weight (UHMW) poly(methyl methacrylate) (PMMA) with Mn up to 1390 kg mol−1. This synthesis method is a one-step process without any co-catalyst in a solvent-free medium. SEM, PXRD, FT-IR, TGA, and nitrogen sorption measurements confirmed the 2D and leaf-like structure of ZIF-L. The results of PXRD, SEM, TGA demonstrate that the catalyst ZIF-L is remarkably stable even after a long-time polymerization reaction. Zwitterionic Lewis pair polymerization (LPP) has been proposed for the catalytic performance of ZIF-L on methyl methacrylate (MMA) polymerization. This MMA polymerization is consistent with a living system, where ZIF-L could reinitiate the polymerization and propagates the process by gradually growing the polymer chains.

Pilot-Scale Experimental Study of a New High-Loading Absorbent for Capturing CO2 from Flue Gas

Chemical absorbents with low-energy requirements have become the primary focus of the research on CO2 capture from flue gas in power plants. To verify the absorption performance of the NICE absorbent developed by the National Institute of Clean-and-Low-Carbon Energy in China, a performance optimization test was conducted in Zhejiang University’s pilot-scale platform, and the effects of the liquid–gas ratio, regeneration pressure, rich liquid fractional flow, and interstage cooling on the absorption performance and regeneration energy consumption were investigated. The results showed that in the CO2 pilot test, the optimized minimum regeneration energy consumption was 2.85 GJ/t CO2, and the corresponding process parameters were as follows: a liquid–gas ratio of 1.82 L/m3, regeneration pressure of 191 kPa, an interstage cooling temperature of 40 °C, and a rich liquid fractional flow ratio of 0.18. This study preliminarily verified the low-energy consumption performance of the NICE absorbent and showed its good potential for industrial applications. Additionally, the NICE absorbent showed promise for capital and operating cost savings because of its low liquid–gas ratio.

Carbonic anhydrase for CO2 capture, conversion and utilization

Carbonic anhydrase (CA) enzymes, catalyzing the CO₂ hydration at a high turnover number, can be employed in expediting CO₂ capture, conversion and utilization to aid in carbon neutrality. Despite extensive research over the last decade, there remain challenges in CA-related technologies due to poor stability and suboptimal use of CAs. Herein, we discuss recent advances in CA stabilization by protein engineering and enzyme immobilization, and shed light on state-of-the-art of in vitro and in vivo CA-mediated CO₂ conversion for improved production of value-added chemicals using CO₂ as a feedstock.

Recent Advances in Emerging Metal- and Covalent-Organic Frameworks for Enzyme Encapsulation

Enzyme catalysis enables complex biotransformation to be imitated. This biomimetic approach allows for the application of enzymes in a variety of catalytic processes. Nevertheless, enzymes need to be shielded by a support material under challenging catalytic conditions due to their intricate and delicate structures. Specifically, metal-organic frameworks and covalent-organic frameworks (MOFs and COFs) are increasingly popular for use as enzyme-carrier platforms because of their excellent tunability in structural design as well as remarkable surface modification. These porous organic framework capsules that host enzymes not only protect the enzymes against harsh catalytic conditions but also facilitate the selective diffusion of guest molecules through the carrier. This review summarizes recent progress in MOF-enzyme and COF-enzyme composites and highlights the pore structures tuned for enzyme encapsulation. Furthermore, the critical issues associated with interactions between enzymes and pore apertures on MOF- and COF-enzyme composites are emphasized, and perspectives regarding the development of high-quality MOF and COF capsules are presented.

Enhanced enzymatic performance of immobilized lipase on metal organic frameworks with superhydrophobic coating for biodiesel production

Inspired by the interfacial catalysis of lipase, Herein, the hydrophobic ZIF-L coated with polydimethylsiloxane (PDMS) were prepared by chemical vapor deposition (CVD) and used to immobilize lipase from Aspergillus oryzae (AOL) for biodiesel production. The results showed that the PDMS coating enhanced the stability of ZIF-8 and ZIF-L in PBS. Immobilization efficiency of AOL on PDMS-modified ZIF-L was 96% under optimized conditions. The resultant immobilized lipase (AOL@PDMS-ZIF-L) exhibited higher activity recovery (430%) than AOL@ZIF-L. Meanwhile, compared with free lipase, the AOL@PDMS-ZIF-L exhibited better storage stability and thermal stability. After 150 days of storage, the free lipase retained only 20% of its original activity of hydrolyzing p-NPP, while the AOL@PDMS-ZIF-L still retained 90% of its original activity. The biodiesel yield catalyzed from soybean oil by free lipase was only 69%, However, the biodiesel yield by AOL@PDMS-ZIF-L reached 94%, and could still be maintained at 85% even after 5 consecutive cycles. It is believed that this convenient and versatile strategy has great promise in the important fields of immobilized lipase on MOF for biodiesel production.

Thin-Film Composite Membrane Prepared by Interfacial Polymerization on the Integrated ZIF-L Nanosheets Interface for Pervaporation Dehydration

Thin-film composite (TFC) membranes are attracting wide attention because their ultrathin selective layer usually corresponds to the higher membrane flux for pervaporation. However, the direct preparation of the TFC membranes on ceramic substrates confronted with the great difficulties because the larger pores on ceramic substrate surfaces are detrimental to the formation of an intact polyamide (PA) selective layer produced by interfacial polymerization (IP) reaction. Here, the integrated ZIF-L nanosheets were proposed to be used as an assistance interlayer for the first time to eliminate the existence of the pores of the ceramic support, and provides a better basis for the formation of an intact PA selective layer by IP reaction between TMC and ethylenediamine (EDA). The experimental data obtained in pervaporation (PV) show that the increased flux from 1.1 to 2.9 kg/m²h corresponds to the decreased separation factor from 396 to 110 when the feed concentration of ethanol decreases from 95 wt % to 80 wt % at 50 °C. In addition, the membrane flux increases from 0.8 to 2.5 kg/m²h with a change of the separation factor from 683 to 111 when the operational temperature varies from 30 to 60 °C. These results demonstrate the great potential of the fabricated TFC membranes in practical application for PV dehydration of organic solutions.

Sustainable One-Pot Immobilization of Enzymes in/on Metal-Organic Framework Materials

The industrial use of enzymes generally necessitates their immobilization onto solid supports. The well-known high affinity of enzymes for metal-organic framework (MOF) materials, together with the great versatility of MOFs in terms of structure, composition, functionalization and synthetic approaches, has led the scientific community to develop very different strategies for the immobilization of enzymes in/on MOFs. This review focuses on one of these strategies, namely, the one-pot enzyme immobilization within sustainable MOFs, which is particularly enticing as the resultant biocomposite Enzyme@MOFs have the potential to be: (i) prepared in situ, that is, in just one step; (ii) may be synthesized under sustainable conditions: with water as the sole solvent at room temperature with moderate pHs, etc.; (iii) are able to retain high enzyme loading; (iv) have negligible protein leaching; and (v) give enzymatic activities approaching that given by the corresponding free enzymes. Moreover, this methodology seems to be near-universal, as success has been achieved with different MOFs, with different enzymes and for different applications. So far, the metal ions forming the MOF materials have been chosen according to their low price, low toxicity and, of course, their possibility for generating MOFs at room temperature in water, in order to close the cycle of economic, environmental and energy sustainability in the synthesis, application and disposal life cycle.

Metal-Organic Frameworks as a Versatile Materials Platform for Unlocking New Potentials in Biocatalysis

Biocatalysts immobilization with nanomaterials has promoted the development of biocatalysis significantly and made it an indispensable part of catalysis industries nowadays. Metal-organic frameworks (MOFs), constructed from organic linkers and metal ions or clusters, have raised significant interests for biocatalysts immobilization in recent years. The diversity of building units, molecular-scale tunability, and modular synthetic routes of MOFs greatly expand its ability as the host to integrate with biocatalysts. In this review, the general synthetic strategies of MOFs with biocatalysts are first summarized. Then, the recent progress of MOFs as a versatile host for a series of biocatalysts, including natural enzymes, nanozymes, and organism-based biocatalysts, followed by the introduction of MOFs themselves as biocatalysts, is discussed. Furthermore, the stimuli-responsive properties of MOFs themselves or the additional functionalization of protein, polymer, and peptide within/on MOF that enable the biocatalysts with the controllable and tunable behavior are also summarized, which could unlock new potentials in biocatalysis. Finally, a perspective of the upcoming challenges, potential impacts, and future directions of biocatalytic MOFs is provided.

Integration of metal organic frameworks with enzymes as multifunctional solids for cascade catalysis

Enzymes exhibit a large degree of compatibility with metal-organic frameworks (MOFs) which allows the development of multicomponent catalysts consisting of enzymes adsorbed or occluded by MOFs. The combination of enzymes and MOFs in a multicomponent catalyst can be used to promote cascade reactions in which two or more individual reactions are performed in a single step. Cascade reactions take place due to the cooperation of active sites present on the MOF with the enzyme. A survey of the available data establishes that often an enzyme undergoes stabilization by association with a MOF and the system exhibits notable recyclability. In addition, the existence of synergism is observed as a consequence of the close proximity of all the required active sites in the multicomponent catalyst. After an introductory section describing the specific features and properties of enzyme-MOF assemblies, the main part of the present review focuses on the description of the cascade reactions that have been reported with commercial enzymes associated with MOFs, paying special attention to the advantages derived from the multicomponent catalyst. Related to the catalytic activity to metabolize glucose, generating reactive oxygen species (ROS) and decreasing the solution pH, an independent section describes the recent use of enzyme-MOF catalysts in cancer therapy. The last paragraphs summarize the current state of the art and provide our view on future developments in this field.

Enzymatic characteristics of immobilized carbonic anhydrase and its applications in CO2 conversion

Native carbonic anhydrase (CA) has been widely used in several different applications due to its catalytic function in the interconversion of carbon dioxide (CO₂) and carbonic acid. However, subject to its stability and recyclability, native CA often deactivates when in harsh environments, which restricts its applications in the commercial market. Maintaining the stability and high catalytic activity of CA is challenging. Immobilization provides an effective route that can improve enzymatic stability. Through the interaction of covalent bonds and van der Waals forces, water-soluble CA can be combined with various insoluble supports to form water-insoluble immobilized CA so that CA stability and utilization can be greatly improved. However, if the immobilization method or immobilization condition is not suitable, it often leads to a decrease in CA activity, reducing the application effects on CO₂ conversion. In this review, we discuss existing immobilization methods and applications of immobilized CA in the environmental field, such as the mineralization of carbon dioxide and multienzyme cascade catalysis based on CA. Additionally, prospects in current development are outlined. Because of the many outstanding and superior properties after immobilization, CA is likely to be used in a wide variety of scientific and technical areas in the future.

Defective Ultrafine MnOx Nanoparticles Confined within a Carbon Matrix for Low-Temperature Oxidation of Volatile Organic Compounds

The development of catalysts for volatile organic compound (VOC) treatment by catalytic oxidation is of great significance to improve the atmospheric environment. Size-effect and oxygen vacancy engineering are effective strategies for designing high-efficiency heterogeneous catalysts. Herein, we explored the in situ carbon-confinement-oxidation method to synthesize ultrafine MnO_x nanoparticles with adequately exposed defects. They exhibited an outstanding catalytic performance with a T₉₀ of 167 °C for acetone oxidation, which is 73 °C lower than that of bulk MnO_x (240 °C). This excellent catalytic activity was primarily ascribed to their high surface area, rich oxygen vacancies, abundant active oxygen species, and good reducibility at low temperatures. Importantly, the synthesized ultrafine MnO_x exhibited impressive stability in long-term, cycling and water-resistance tests. Moreover, the possible mechanism for acetone oxidation over MnO_x-NA was revealed. In this work, we not only prepared a promising material for removing VOCs but also provided a new strategy for the rational design of ultrafine nanoparticles with abundant defects.

Immobilization of formate dehydrogenase in metal organic frameworks for enhanced conversion of carbon dioxide to formate

Hydrogenation of carbon dioxide (CO₂) to formic acid by the enzyme formate dehydrogenase (FDH) is a promising technology for reducing CO₂ concentrations in an environmentally friendly manner. However, the easy separation of FDH with enhanced stability and reusability is essential to the practical and economical implementation of the process. To achieve this, the enzyme must be used in an immobilized form. However, conventional immobilization by physical adsorption is prone to leaching, resulting in low stability. Although other immobilization methods (such as chemical adsorption) enhance stability, they generally result in low activity. In addition, mass transfer limitations are a major problem with most conventional immobilized enzymes. In this review paper, the effectiveness of metal organic frameworks (MOFs) is assessed as a promising alternative support for FDH immobilization. Kinetic mechanisms and stability of wild FDH from various sources were assessed and compared to those of cloned and genetically modified FDH. Various techniques for the synthesis of MOFs and different immobilization strategies are presented, with special emphasis on in situ and post synthetic immobilization of FDH in MOFs for CO₂ hydrogenation.

Novel Nonaqueous Liquid-Liquid Biphasic Solvent for Energy-Efficient Carbon Dioxide Capture with Low Corrosivity

To address the problems of the relatively high energy penalty and corrosivity of aqueous biphasic solvents, a novel nonaqueous biphasic solvent composed of 2-((2-aminoethyl)amino)ethanol (AEEA), dimethyl sulfoxide (DMSO), and N,N,N',N″,N″-pentamethyldiethylenetriamine (PMDETA) was proposed for CO₂ capture. With optimization, this novel AEEA-DMSO-PMDETA (A-D-P) biphasic solvent could achieve a high CO₂ loading of 1.75 mol·mol^-1, of which 96.8% of the absorbed CO₂ was enriched in the lower phase with only 49.6% of the total volume. ¹³C NMR analysis and quantum calculations revealed that A-D-P could absorb CO₂ to form not only carbamate but also carbamic acid species, which were stabilized by DMSO via hydrogen-bonding interactions. Most products were highly polar and preferred to dissolve in polar DMSO rather than the less polar PMDETA, thus leading to the phase change. The thermodynamics results showed that the heat duty of A-D-P was only 1.66 GJ·ton^-1 CO₂ (393.15 K), which was significantly lower than that of the benchmark MEA (3.59 GJ·ton^-1 CO₂) and the reported aqueous biphasic solvents. Moreover, A-D-P presented a noncorrosive behavior to steel after CO₂ saturation, clearly showing its superiority over MEA and the aqueous biphasic solvents. Therefore, with superior properties of energy savings and noncorrosiveness, the A-D-P biphasic solvent could be a promising candidate for CO₂ capture.