Photochemical Protection of Reactive Sites on Defective TiO2- x Surface for Electrochemical Water Treatment

Regulating Surface Dipole Moments of TiO2 for the pH-Universal Cathodic Fenton-Like Process

Although electro-Fenton (EF) processes can avoid the safety risks raised by concentrated hydrogen peroxide (H2O2), the Fe(III) reduction has always been either unstable or inefficient at high pH, resulting in catalyst deactivation and low selectivity of H2O2 activation for producing hydroxyl radicals (•OH). Herein, we provided a strategy to regulate the surface dipole moment of TiO2 by Fe anchoring (TiO2-Fe), which, in turn, substantially increased the H2O2 activation for •OH production. The TiO2-Fe catalyst could work at pH 4-10 and maintained considerable degradation efficiency for 10 cycles. Spectroscopic analysis and a theoretical study showed that the less polar Fe-O bond on TiO2-Fe could finely tune the polarity of H2O2 to alter its empty orbital distribution, contributing to better ciprofloxacin degradation activity within a broad pH range. We further verified the critical role of the weakened polarity of H2O2 on its homolysis into •OH by theoretically and experimentally investigating Cu-, Co-, Ni-, Mn-, and Mo-anchored TiO2. This concept offers an avenue for elaborate design of green, robust, and pH-universal cathodic Fenton-like catalysts and beyond.

Feasibility of replacing proton exchange membranes with pressure-driven membranes in membrane electrochemical reactors for high salinity organic wastewater treatment

Membrane electrochemical reactor (MER) shows superiority to electrochemical oxidation (EO) in high salinity organic wastewater (HSOW) treatment, but requirement of proton exchange membranes (PEM) increases investment and maintenance cost. In this work, the feasibility of using low-cost pressure-driven membranes as the separation membrane in MER system was systematically investigated. Commonly used pressure-driven membranes, including loose membranes such as microfiltration (MF) and ultrafiltration (UF), as well as dense membranes like nanofiltration (NF) and reverse osmosis (RO), were employed in the study. When tested in a contamination-free solution, MF and UF exhibited superior electrochemical performance compared to PEM, with comparable pH regulation capabilities in the short term. When foulant (humic acid, Ca2+ and Mg2+) presented in the feed, UF saved the most energy (43 %) compared to PEM with similar removal rate of UV254 (∼85 %). In practical applications of MER for treating nanofiltration concentrate (NC) of landfill leachate, UF saved 27 % energy compared to PEM per cycle with the least Ca2+ and Mg2+ retention in membrane and none obvious organics permeation. For fouled RO and PEM with ion transport impediment, water splitting was exacerbated, which decreased the percentage of oxidation for organics. Overall, replacing of PEM with UF significantly reduce the costs associated with both the investment and operation of MER, which is expected to broaden the practical application for treating HSOW.

A Full-Spectrum ZnS Photocatalyst with Gradient Distribution of Atomic Copper Dopants and Concomitant Sulfur Vacancies for Highly Efficient Hydrogen Evolution

A rarely discussed phenomenon in the realm of photocatalytic materials involves the presence of gradient distributed dopants and defects from the interior to the surface. This intriguing characteristic has been successfully achieved in the case of ZnS through the incorporation of atomic monovalent copper ions (Cu+) and concurrent sulfur vacancies (Vs), resulting in a photocatalyst denoted as G-CZS1-x. Through the cooperative action of these atomic Cu dopants and Vs, G-CZS1-x significantly extends its photoabsorption range to encompass the full spectrum (200-2100 nm), which improves the solar utilization ability. This alteration enhances the efficiency of charge separation and optimizes Δ(H*) (free energy of hydrogen adsorption) to approach 0 eV for the hydrogen evolution reaction (HER). It is noteworthy that both surface-exposed atomic Cu and Vs act as active sites for photocatalysis. G-CZS1-x exhibits a significant H2 evolution rate of 1.01 mmol h-1 in the absence of a cocatalyst. This performance exceeds the majority of previously reported photocatalysts, exhibiting approximately 25-fold as ZnS, and 5-fold as H-CZS1-x with homogeneous distribution of equal content Cu dopants and Vs. In contrast to G-CZS1-x, the H adsorption on Cu sites for H-CZS1-x (ΔG(H*) = -1.22 eV) is excessively strong to inhibit the H2 release, and the charge separation efficiency for H-CZS1-x is relatively sluggish, revealing the positive role of a gradient distribution model of dopants and defects on activity enhancement. This work highlights the synergy of atomic dopants and defects in advancing photoactivity, as well as the significant benefit of the controllable distribution model of dopants and defects for photocatalysis.

Bias-free driven ion assisted photoelectrochemical system for sustainable wastewater treatment

Photoelectrochemical (PEC) systems have emerged as a prominent renewable energy-based technology for wastewater treatment, offering sustainable advantages such as eliminating dependence on fossil fuels or grid electricity compared to traditional electrochemical treatment methods. However, previous PEC systems often overlook the potential of ions present in wastewater as an alternative to externally applied bias voltage for enhancing carrier separation efficiency. Here we report a bias-free driven ion assisted photoelectrochemical (IAPEC) system by integration of an electron-ion acceptor cathode, which leverages its fast ion-electron coupling capability to significantly enhance the separation of electrons and holes at the photoanode. We demonstrate that Prussian blue analogues (PBAs) can serve as robust and reversible electron-ion acceptors that provide reaction sites for photoelectron coupling cations, thus driving the hole oxidation to produce strong oxidant free radicals at photoanode. Our IAPEC system exhibits superior degradation performance in wastewater containing chloride medium. This indicates that, in addition to the cations (e.g., Na+) accelerating the electron transfer rate, the presence of Cl- ions further enhance efficient and sustainable wastewater treatment. This work highlights the potential of utilizing abundant sodium chloride in seawater as a cost-effective additive for wastewater treatment, offering crucial insights into the use of local materials for effective, low-carbon, and sustainable treatment processes.

Photoinduced Absorption Spectroscopy of Photoelectrocatalytic Methylene Blue Oxidation on Titania and Hematite: The Thermodynamic and Kinetic Impacts on Reaction Pathways

Photoelectrochemical oxidation of methylene blue is investigated, with particular focus on the difference in kinetics and thermodynamics of decoloration and mineralization employing photoinduced absorption spectroscopy. Hematite and titania photoanodes are used for the comparison of both reactions, which is determined to be associated with the depth of the valence band (3.2 vs 2.5 V for titania and hematite, respectively). Methylene blue is mineralized by the titania photoanode, however it is only oxidized to small fragments by hematite. Such difference is related to the valence band potential that provides the thermodynamic driving force for photogenerated holes in both materials. In addition, the kinetic competition of water oxidation is found to occur on titania by controlling the pH of the electrolyte. In the pH 14 electrolyte, mineralization of methylene blue is suppressed due to the faster and dominant kinetics of water oxidation, in contrast to the complete mineralization in the near neutral electrolyte where water oxidation kinetics are modest. These results clearly address the importance considering both thermodynamic and kinetic challenges of methylene blue oxidation, which has been thought to be an easy molecule to oxidize, as the model reaction in the application of photo(electro)catalysis using metal oxides.

Morphology regulation of zero-valent iron nanosheets supported on microsilica for promoting peroxymonosulfate activation

Combing the assisted dispersion strategy of support with the wet chemical reduction method, a novel nano-zero valent iron/microsilica (nZVI/M) composite was successfully fabricated, where the 2D nZVI nanosheets were uniformly anchored and covered on the surface of microsilica. The introduction of microsilica notably relieved the agglomeration effect of nZVI nanosheets, which induced the improvement of specific surface area (45.68 m²/g) and pore volume (0.172 cm³/g), and thereby exposing more active sites for bisphenol A (BPA) removal. The optimized nZVI/M-0.6 displayed the superior catalytic performance in the presence of peroxymonosulfate (PMS) with the degradation rate of BPA reached above 97% within 3 min and a higher constant rate of 0.659 min^-1, which was approximately 3.9 times as high as that of nZVI/PMS system. The homogeneously dispersion of nZVI nanosheets on microsilica benefited for the assembly of the pollutants and boosting the kinetics of the catalytic degradation process. As a highly efficient PMS activator, it could well maintain the catalytic activity in different real water samples. The quenching experiments verified that SO₄^•- played the dominate role for BPA removal. This work offered novel insights for designing and preparing iron-based persulfate activator for wastewater treatment.

A review of electrochemical oxidation technology for advanced treatment of medical wastewater

Antibiotics widely exist in medical wastewater, which seriously endanger human health. With the spread of the COVID-19 and monkeypox around the world, a large number of antibiotics have been abused and discharged. How to realize the green and efficient treatment of medical wastewater has become a hot research topic. As a common electrochemical water treatment technology, electrochemical oxidation technology (EOT) could effectively achieve advanced treatment of medical wastewater. Since entering the 21st century, electrochemical oxidation water treatment technology has received more and more attention due to its green, efficient, and easy-to-operate advantages. In this study, the research progress of EOT for the treatment of medical wastewater was reviewed, including the exploration of reaction mechanism, the preparation of functional electrode materials, combining multiple technologies, and the design of high-efficiency reactors. The conclusion and outlook of EOT for medical wastewater treatment were proposed. It is expected that the review could provide prospects and guidance for EOT to treat medical wastewater.

Visible-Light-Active Black TiO2 Nanoparticles with Efficient Photocatalytic Performance for Degradation of Pharmaceuticals

Special attention has recently been paid to surface-defective titanium dioxide and black TiO₂ with advanced optical, electrical, and photocatalytic properties. Synthesis of these materials for photodegradation and mineralization of persistent organic pollutants in water, especially under visible radiation, presents interest from scientific and application points of view. Chemical reduction by heating a TiO₂ and NaBH₄ mixture at 350 °C successfully introduced Ti³⁺ defects and oxygen vacancies at the surface of TiO₂, with an increase in the photocatalytic degradation of amoxicillin—an antibiotic that is present in wastewater due to its intense use in human and animal medicine. Three TiO₂ samples were prepared at different annealing temperatures to control the ratio between anatase and rutile and were subjected to chemical reduction. Electron paramagnetic resonance investigations showed that the formation of surface Ti³⁺ defects in a high concentration occurred mainly in the anatase sample annealed at 400 °C, contributing to the bandgap reduction from 3.32 eV to 2.92 eV. The reduced band gap enhances visible light absorption and the efficiency of photocatalysis. The nanoparticles of ~90 m²/g specific surface area and 12 nm average size exhibit ~100% efficiency in the degradation of amoxicillin under simulated solar irradiation compared with pristine TiO₂. Mineralization of amoxicillin and by-products was over 75% after 48 h irradiation for the anatase sample, where the Ti³⁺ defects were present in a higher concentration at the catalyst’s surface.

Fast Generation of Hydroxyl Radicals by Rerouting the Electron Transfer Pathway via Constructed Chemical Channels during the Photo-Electro-Reduction of Oxygen

A strategy for the fast generation of hydroxyl radicals (HO·) via photo-electro-reduction of oxygen by rerouting the electron transfer pathway was proposed. The rate-determining step of HO· production is the formation of H₂O₂ and the simultaneous reduction of H₂O₂. Engineering of F-TiO₂ with single atom Pd bonded with four F and two O atoms favored the electrocatalytic 2-electron oxygen reduction to H₂O₂ with as high as 99% selectivity, while the additional channel bond HO-O···Pd-F-TiO₂ facilitates the photogenerated electron transfer from the conduction band to single atom Pd to reduce Pd···O-OH to HO·. The optimized HO· production rate is 9.18 μ mol L^-1 min^-1, which is 2.6-52.5 times higher than that in traditional advanced oxidation processes. In the application of wastewater treatment, this proposed photoelectrocatalytic oxygen reduction method, respectively, shows fast kinetics of 0.324 and 0.175 min^-1 for removing bisphenol A and acetaminophen. Around 93.2% total organic carbon and 99.3% acute toxicity removal were achieved. Additionally, the degradation efficiency was less affected by the water source and pH value because of the evitable usage of metallic active sites. This work represents a fundamental investigation on the generation rate of HO·, which would pave the way for the future development of photoelectrocatalytic technologies for water purification.

Mechanism and Purification Effect of Photocatalytic Wastewater Treatment Using Graphene Oxide-Doped Titanium Dioxide Composite Nanomaterials

The present work aims to examine the mechanism and purification effect of graphene oxide (GO) and GO composite materials for photocatalysis sewage treatment. TiO2 nanoparticles were prepared using the sol-gel technique; GO was prepared using the modified Hummers technique; and finally, a new N-TiO2/GO photocatalysis composite material was prepared by hydrothermal synthesis. As a nitrogen source, urea uses non-metal doping to broaden the photoresponse range of TiO2. The prepared GO and its composite materials are characterized. Simulation experiments, using the typical water dye pollutant rhodamine B (RhB), tested and analyzed the adsorption and photocatalysis performances of the prepared GO and its composite materials. Characterization analysis demonstrates that TiO2 is distributed on the GO surface in the prepared N-TiO2/GO material. Simultaneously, nitrogen doping causes TiO2 on the GO surface to seem uniformly dispersed. X-ray Diffractometer (XRD) spectrums suggest that TiO2 on the GO surface presents an anatase crystal structure; infrared spectrums display the characteristic vibration peaks of the TiO2 and GO. Adsorption performance analysis illustrates that N-TiO2/GO can provide an adsorption amount of 167.92 mg/g in the same time frame and photocatalysis for visible lights of 57.69%. All data present an excellent linear fitting relationship to the first-order dynamic equation. Therefore, the prepared GO composite materials possess outstanding absorption and photocatalysis performances, providing an experimental basis for sewage treatment and purification using photocatalysis approaches in the future.

Enhanced peroxymonosulfate activation on dual active sites of N vacancy modified g-C3N4 under visible-light assistance and its selective removal of organic pollutants

Constructing highly efficient metal-free material towards peroxymonosulfate (PMS) activation under photocatalytic assistance is a promising strategy for water decontamination. Herein, N vacancy modified g-C₃N₄ nanotube (VCN) was prepared to build a novel photo-assisted PMS activation system (PPAS), in which the unique electronic structure created by N vacancy could favor the PMS activation on VCN under visible-light irradiation. The role of N vacancy in PPAS was firstly studied through tuning its content in VCN. The results showed that the N vacancy greatly improved PMS activation on VCN PPAS towards organic pollutants removal. The VCN PPAS with moderate N vacancy modification performed best, whose kinetic constant for Rhodamine B degradation was 9.6 and 2.6 times higher than that of VCN/PMS system and pristine g-C₃N₄ PPAS, respectively. Moreover, the VCN PPAS performed well in wide pH range (3-12) and real water background. Selective removal of different organic pollutants was found on VCN PPAS, owing to the different interaction between pollutant and the catalyst surface with surface-bound radicals. The O₂^- and OH were major oxidants for pollutant removal in VCN PPAS, which were produced on dual active sites of VCN via two pathways: The N vacancy enhanced PMS adsorption and trapped photogenerated electrons for PMS reduction into OH, while the electron-deficient C atoms created by N loss promoted the PMS oxidation into O₂^-.

Fabrication of black TiO2-x /NiFe2O4 supported on diatomaceous earth with enhanced sonocatalytic activity for ibuprofen mitigation

This study reports a facile fabrication of black TiO_2-x /NiFe₂O₄ (Ti³⁺ self-doped titania coupled with nickel ferrite), an efficient sonocatalyst for ibuprofen (IBP) mitigation. Compared with TiO_2-x or NiFe₂O₄, TiO_2-x /NiFe₂O₄ heterojunction displayed higher sonocatalytic activity, and their immobilization onto diatomaceous earth further enhanced mitigation efficiency due to the synergy between adsorption and sonocatalysis. About 96.7% of 10 mg l^-1 IBP was removed in 100 min using 0.7 g l^-1 catalyst at pH = 6, with the ultrasonic power of 144 W and frequency of 60 KHz. Quenching experiment results demonstrated the roles of reactive species. The intermediates during IBP sono-oxidation were determined by HPLC-MS method, and the acute toxicity was evaluated. Furthermore, the reaction mechanism was proposed. The sonocatalyst revealed excellent reusability, suggesting itself promising for wastewater treatment.

Fabrication of black TiO2−x/CuFe2O4 decorated on diatomaceous earth with enhanced sonocatalytic activity for ibuprofen mitigation

This study reports facile fabrication of black TiO_2−x/CuFe₂O₄ (Ti³⁺ self-doped titania coupled with copper ferrite), an efficient sonocatalyst for ibuprofen (IBP) mitigation.