Silver Nanowire-Modified Filter with Controllable Silver Ion Release for Point-of-Use Disinfection

Highly Electroconductive Metal-Polymer Hybrid Foams Based on Silver Nanowires: Manufacturing and Characterization

Due to their electroconductive properties, flexible open-cell polyurethane foam/silver nanowire (PUF/AgNW) structures can provide an alternative for the construction of cheap pressure transducers with limited lifetimes or used as filter media for air conditioning units, presenting bactericidal and antifungal properties. In this paper, highly electroconductive metal-polymer hybrid foams (MPHFs) based on AgNWs were manufactured and characterized. The electrical resistance of MPHFs with various degrees of AgNW coating was measured during repeated compression. For low degrees of AgNW coating, the decrease in electrical resistance during compression occurs in steps and is not reproducible with repeated compression cycles due to the reduced number of electroconductive zones involved in obtaining electrical conductivity. For high AgNW coating degrees, the decrease in resistance is quasi-linear and reproducible after the first compression cycle. However, after compression, cracks appear in the foam cell structure, which increases the electrical resistance and decreases the mechanical strength. It can be considered that PUFs coated with AgNWs have a compression memory effect and can be used as cheap solutions in industrial processes in which high precision is not required, such as exceeding a maximum admissible load or as ohmic seals for product security.

The Application of Silver to Decontaminate Dental Unit Waterlines-a Systematic Review

The contamination of dental unit waterlines (DUWLs) is a major health concern since it can pose cross-infection risks among dental professionals and their patients. Silver is one of the widely used metals in medical fields due to its superior antimicrobial properties. Silver-based agents have been commercially available for the decontamination of dental unit water currently. This systematic review aims to examine the evidence supporting efficacy and safety of application of silver to decontaminate DUWLs. We performed a search of the peer-review literature of studies in six electronic databases using corresponding search terms. Eligibility was restricted to English-language studies exploring the application of silver to decontaminate dental unit water, e.g., silver-based disinfectants and silver-coated dental waterlines tubing. The search identified 148 articles, and 9 articles that met the criteria were synthesized with qualitative narrative analyses. We observed good evidence of antimicrobial efficacy of silver with hydrogen peroxide on diverse microorganism present in DUWLs. Furthermore, there is insufficient evidence on the application of silver nanoparticles (AgNPs) as an efficient material to control the biofilms in DUWLs. Post-treatment data of either the bactericidal and bacteriostatic effects of silver or AgNPs, especially the actual clinical efficacy of long-term application, are scarce. More high-quality research is needed to resolve the gap on the optimal dosage and treatment options required to control bacterial and biofilm in DUWLs with silver-containing materials.

Advances in Flexible Metallic Transparent Electrodes

Transparent electrodes (TEs) are pivotal components in many modern devices such as solar cells, light-emitting diodes, touch screens, wearable electronic devices, smart windows, and transparent heaters. Recently, the high demand for flexibility and low cost in TEs requires a new class of transparent conductive materials (TCMs), serving as substitutes for the conventional indium tin oxide (ITO). So far, ITO has been the most used TCM despite its brittleness and high cost. Among the different emerging alternative materials to ITO, metallic nanomaterials have received much interest due to their remarkable optical-electrical properties, low cost, ease of manufacturing, flexibility, and widespread applicability. These involve metal grids, thin oxide/metal/oxide multilayers, metal nanowire percolating networks, or nanocomposites based on metallic nanostructures. In this review, a comparison between TCMs based on metallic nanomaterials and other TCM technologies is discussed. Next, the different types of metal-based TCMs developed so far and the fabrication technologies used are presented. Then, the challenges that these TCMs face toward integration in functional devices are discussed. Finally, the various fields in which metal-based TCMs have been successfully applied, as well as emerging and potential applications, are summarized.

Operando Investigation of Locally Enhanced Electric Field Treatment (LEEFT) Harnessing Lightning-Rod Effect for Rapid Bacteria Inactivation

The growth of undesired bacteria causes numerous problems. Here, we show that locally enhanced electric field treatment (LEEFT) can cause rapid bacteria inactivation by electroporation. The bacteria inactivation is studied in situ at the single-cell level on a lab-on-a-chip that has nanowedge-decorated electrodes. Rapid bacteria inactivation occurs at the nanowedge tips where the electric field is enhanced due to the lightning-rod effect. Electroporation induced by the locally enhanced electric field is the predominant mechanism. The antimicrobial performance depends on the strength of the enhanced electric field instead of the applied voltage, and no generation of reactive oxygen species (ROS) is detected when >90% bacteria inactivation is achieved. Quick membrane pore closure under lower voltages confirms that electroporation is induced in LEEFT. This work is the first-time visualization and mechanism elucidation of LEEFT for bacteria inactivation at the single-cell level, and the findings will provide strong support for its future applications.

Experimental evolution of Pseudomonas putida under silver ion versus nanoparticle stress

Whether the antibacterial properties of silver nanoparticles (AgNPs) are simply due to the release of silver ions (Ag⁺ ) or, additionally, nanoparticle-specific effects, is not clear. We used experimental evolution of the model environmental bacterium Pseudomonas putida to ask whether bacteria respond differently to Ag⁺ or AgNP treatment. We pre-evolved five cultures of strain KT2440 for 70 days without Ag to reduce confounding adaptations before dividing the fittest pre-evolved culture into five cultures each, evolving in the presence of low concentrations of Ag⁺ , well-defined AgNPs or Ag-free controls for a further 75 days. The mutations in the Ag⁺ or AgNP evolved populations displayed different patterns that were statistically significant. The non-synonymous mutations in AgNP-treated populations were mostly associated with cell surface proteins, including cytoskeletal membrane protein (FtsZ), membrane sensor and regulator (EnvZ and GacS) and periplasmic protein (PP_2758). In contrast, Ag⁺ treatment was selected for mutations linked to cytoplasmic proteins, including metal ion transporter (TauB) and those with metal-binding domains (ThiL and PP_2397). These results suggest the existence of AgNP-specific effects, either caused by sustained delivery of Ag⁺ from AgNP dissolution, more proximate delivery from cell-surface bound AgNPs, or by direct AgNP action on the cell's outer membrane.

Triboelectrification induced self-powered microbial disinfection using nanowire-enhanced localized electric field

Air-transmitted pathogens may cause severe epidemics showing huge threats to public health. Microbial inactivation in the air is essential, whereas the feasibility of existing air disinfection technologies meets challenges including only achieving physical separation but no inactivation, obvious pressure drops, and energy intensiveness. Here we report a rapid disinfection method toward air-transmitted bacteria and viruses using the nanowire-enhanced localized electric field to damage the outer structures of microbes. This air disinfection system is driven by a triboelectric nanogenerator that converts mechanical vibration to electricity effectively and achieves self-powered. Assisted by a rational design for the accelerated charging and trapping of microbes, this air disinfection system promotes microbial transport and achieves high performance: >99.99% microbial inactivation within 0.025 s in a fast airflow (2 m/s) while only causing low pressure drops (<24 Pa). This rapid, self-powered air disinfection method may fill the urgent need for air-transmitted microbial inactivation to protect public health.

Self-Driven "Microfiltration" Enabled by Porous Superabsorbent Polymer (PSAP) Beads for Biofluid Specimen Processing and Storage

A remote collection of biofluid specimens such as blood and urine remains a great challenge due to the requirement of continuous refrigeration. Without proper temperature regulation, the rapid degradation of analytical targets in the specimen may compromise the accuracy and reliability of the testing results. In this study, we develop porous superabsorbent polymer (PSAP) beads for fast and self-driven "microfiltration" of biofluid samples. This treatment effectively separates small analytical targets (e.g., glucose, catalase, and bacteriophage) and large undesired components (e.g., bacteria and blood cells) in the biofluids by capturing the former inside and excluding the latter outside the PSAP beads. We have successfully demonstrated that this treatment can reduce sample volume, self-aliquot the liquid sample, avoid microbial contamination, separate plasma from blood cells, stabilize target species inside the beads, and enable long-term storage at room temperature. Potential practical applications of this technology can provide an alternative sample collection and storage approach for medically underserved areas.

Solution-Processed Submicron Free-Standing, Conformal, Transparent, Breathable Epidermal Electrodes

Long-term, real-time, and comfortable epidermal electronics are of great practical importance for healthcare monitoring and human-machine interaction. However, traditional physiological signal monitoring confined by the specific clinical sites and unreliability of the epidermal electrodes leads to great restrictions on its application. Herein, we constructed a solution-processed submicron (down to 230 nm), free-standing, breathable sandwich-structured hybrid electrode composed of a silver nanowire network with a conductive polymer film, which is conformal, water-permeable, and noninvasive to the skin while achieving good signal acquisition ability. The free-standing hybrid electrode is prepared via an in situ capillary force lift-off process and can be transferred onto complex surfaces. The whole process is a complete solution process that facilitates large-area preparation and application. The light-weight hybrid electrodes exhibit high optical transmittance, high electrical conductivity, and high gas/ion permeability. When the hybrid electrodes are attached onto the skin, the imperceptible films show high conformality with low electrical impedance, thus exhibiting significantly improved electrocardiology and electromyogram signal monitoring performance compared to that of the commercial gel electrodes.

Evaluation and prospects of nanomaterial-enabled innovative processes and devices for water disinfection: A state-of-the-art review

This study provided an overview of established and emerging nanomaterial (NM)-enabled processes and devices for water disinfection for both centralized and decentralized systems. In addition to a discussion of major disinfection mechanisms, data on disinfection performance (shortest contact time for complete disinfection) and energy efficiency (electrical energy per order; E_EO) were collected enabling assessments firstly for disinfection processes and then for disinfection devices. The NM-enabled electro-based disinfection process gained the highest disinfection efficiency with the lowest energy consumption compared with physical-based, peroxy-based, and photo-based disinfection processes owing to the unique disinfection mechanism and the direct mean of translating energy input to microbes. Among the established disinfection devices (e.g., the stirred, the plug-flow, and the flow-through reactor), the flow-through reactor with mesh/membrane or 3-dimensional porous electrodes showed the highest disinfection performance and energy efficiency attributed to its highest mass transfer efficiency. Additionally, we also summarized recent knowledge about current and potential NMs separation and recovery methods as well as electrode strengthening and optimization strategies. Magnetic separation and robust immobilization (anchoring and coating) are feasible strategies to prompt the practical application of NM-enabled disinfection devices. Magnetic separation effectively solved the problem for the separation of evenly distributed particle-sized NMs from microbial solution and robust immobilization increased the stability of NM-modified electrodes and prevented these electrodes from degradation by hydraulic detachment and/or electrochemical dissolution. Furthermore, the study of computational fluid dynamics (CFD) was capable of simulating NM-enabled devices, which showed great potential for system optimization and reactor expansion. In this overview, we stressed the need to concern not only the treatment performance and energy efficiency of NM-enabled disinfection processes and devices but also the overall feasibility of system construction and operation for practical application.

Essential oil-incorporated carbon nanotubes filters for bacterial removal and inactivation

In this study, essential oils (EO)-incorporated multi-walled carbon nanotubes (MWCNTs) filters were developed for achieving dual functions in effective removing bacteria from aqueous solutions and inactivating bacteria cells captured on the filters. Tea tree essential oil (TTO), lemon essential oil (LEO), and TTO-LEO-mixture were coated on MWCNTs filters with different MWCNTs loadings ranging from 3 mg to 6 mg. MWCNTs filters with 6.0 mg MWCNTs showed complete removal (100%) of E. coli cells from PBS buffer with 6.35 log10 decrease of cell numbers. TTO, LEO, and TTO/LEO Mix (1:1) coatings at the volume of 50 μL on MWCNTs filters achieved bacterial removal rates of >98%, and highly effective inactivation efficiency. TTO coatings had the highest antimicrobial efficacies than LEO and Mix coatings, MWCNTs filters with 50 μL TTO coating showed 100% inhibitory rate of the captured bacteria on the filter surfaces. Those captured but survived cells on filters with less TTO coating (20μL) significantly reduced their salt tolerances to 30 and 40 g/L NaCl in LB agar, and became less salt tolerance with longer incubation time on the filters. The developed TTO-MWCNTs filters had much higher antimicrobial efficacies than the filters with dual functions developed previously.

Rapid determination of the electroporation threshold for bacteria inactivation using a lab-on-a-chip platform

Electroporation based locally enhanced electric field treatment (LEEFT) is an emerging bacteria inactivation technology for drinking water disinfection. Nevertheless, the lethal electroporation threshold (LET) for bacteria has not been studied, partly due to the tedious work required by traditional experimental methods. Here, a lab-on-a-chip device composed of platinum electrodes deposited on a glass substrate is developed for rapid determination of the LET. When voltage pulses are applied, an electric field with a linear strength gradient is generated on a channel between the electrodes. Bacterial cells exposed to the electric field stronger than the LET are inactivated, while others remain intact. After a cell staining process to differentiate dead and live bacterial cells, the LETs are obtained by analyzing the fluorescence microscopy images. Staphylococcus epidermidis has been utilized as a model bacterium in this study. The LETs range from 10 kV/cm to 35 kV/cm under different pulsed electric field conditions, decreasing with the increase of pulse width, effective treatment time, and pulsed electric field frequency. The effects of medium properties on the LET were also investigated. This lab-on-a-chip device and the experimental approach can also be used to determine the LETs for other microorganisms found in drinking water.