Heavy Metals in the Glass and Enamels of Consumer Container Bottles

Environmental transport and sorting of glass retroreflective microbeads and their potential as proxies for road marking paints

Road marking paints are a potentially important contributor to the global microplastic pool but very little reliable information is available on their erosion or environmental distributions. As potential carriers of or proxies for road paints, we determine the concentrations and sorting of retroreflective glass microbeads in marking materials and in fractionated (< 5 mm) local dusts, soils and sediments. As an aid to our investigation, we also determine the concentrations of metals of geochemical significance or components of road paint pigments in markings and geosolids. Concentrations of beads up to 92,800 kg-1 were observed in street dusts, with a median diameter (350 μm) greater than that in road marking samples (270 μm). Few beads were found in adjacent (< 5 m) or more remote soils (six beads in ten 50-g samples) and none were detected in replicates of a sample of roof dust, suggesting that aeolian transport is limited. Concentrations up to 3700 kg-1 were found in estuarine sediments close to bridges or stormwater runoff effluents, and with increasing sediment depth concentrations and median diameter decreased; beads were not, however, detected in sediments 400 m away from any significant roads or runoff effluents. These observations suggest that bead accumulation is constrained locally but that the precise distance travelled and extent of burial in sediments are inversely related to size. Road marking paints sampled from urban streets readily fragmented into pieces smaller than glass microbeads, suggesting that while beads might carry small quantities of paint, transport and dispersion of the two particle types may not be directly coupled. Environmental ratios of V to Bi and Cr to Pb, as markers for BiVO4- and PbCrO4-pigmented yellow paints, respectively, did not correlate with bead distribution, presumably because these metals have a multitude of additional anthropogenic sources. However, an inverse relationship between bead concentrations and K:Ca suggests that this ratio might be a useful proxy of road marking paint in regions that are geologically similar.

Modified Gold Screen-Printed Electrodes for the Determination of Heavy Metals

Screen-printed electrodes (SPEs) are reliable, portable, affordable, and versatile electrochemical platforms for the real-time analytical monitoring of emerging analytes in the environmental, clinical, and agricultural fields. The aim of this study was to evaluate the electrochemical behavior of gold screen-printed electrodes (SPGEs) modified with molecules containing amino (Tr-N) or α-aminophosphonate (Tr-P) groups for the selective and sensitive detection of the toxic metal ions Pb2+ and Hg2+ in aqueous samples. After optimizing the analytical parameters (conditioning potential and time, deposition potential and time, pH and concentration of the supporting electrolyte), anodic square wave stripping voltammetry (SWASV) was used to evaluate and compare the electrochemical performance of bare or modified electrodes for the detection of Hg2+ and Pb2+, either alone or in their mixtures in the concentration range between 1 nM and 10 nM. A significative improvement in the detection ability of Pb2+ ions was recorded for the amino-functionalized gold sensor SPGE-N, while the presence of a phosphonate moiety in SPGE-P led to greater sensitivity towards Hg2+ ions. The developed sensors allow the detection of Pb2+ and Hg2+ with a limit of detection (LOD) of 0.41 nM and 35 pM, respectively, below the legal limits for these heavy metal ions in drinking water or food, while the sensitivity was 5.84 µA nM-1cm-2 and 10 µA nM-1cm-2, respectively, for Pb2+ and Hg2+. The reported results are promising for the development of advanced devices for the in situ and cost-effective monitoring of heavy metals, even in trace amounts, in water resources.

Changes in oral bioaccessibility of heavy metals in non-digestive sucking habits due to the formation of complexes between digestive fluid components and metals/metalloids

Humans, especially infants, are exposed to harmful substances through various means, including non-nutritive sucking behaviors. Here, we compared the "one-compartment model" and the "three-compartment model" within the "suck model" to assess the oral bioaccessibility of heavy metals in various products and evaluated whether these models can be employed to assess 12 heavy metals present in consumer products. Several certified reference materials, including plastic, paint, glass, and metals, were employed to ensure sample homogeneity. By comparing the two models, we validated that a considerable amount of complexes were formed between saliva components and the extracted heavy metals and that some of these complexes dissociated during reactions with the gastric/intestinal fluids. Furthermore, we observed that in the cases of Cu and Pb, additional complexes were formed as a result of reactions with gastric/intestinal fluids. We measured the total concentrations of the extracted heavy metals using artificial saliva through acid digestion and found that up to 99.7% of the heavy metals participated in the formation of complexes, depending on the characteristics of the sample (e.g., composition) and the target element. This result indicates that the current suck model may notably underestimate the oral bioaccessibility of heavy metals in products associated with sucking behaviors. Therefore, we propose a more conservative and simpler test method for assessing oral bioaccessibility of heavy metals that involves measuring the total concentrations of heavy metals extracted from consumer products using artificial saliva. By doing so, we can account for potential variations in the digestive milieu (e.g., due to ingested food) and the inconsistency in complex formation-dissociation characteristics.

Cadmium exposure promotes ferroptosis by upregulating Heat Shock Protein 70 in vascular endothelial damage of zebrafish

Cadmium (Cd) exposure is a risk factor for endothelial dysfunction and cardiovascular disease. Ferroptosis is a type of cell death that relies on lipid peroxidation. Whether ferroptosis acts in Cd-induced vascular endothelial damage and the underlying mechanisms remain unclear. Herein, we found that Cd resulted in ferroptosis of vascular endothelial cells (ECs) in vivo and in vitro. In the visualized zebrafish embryos, Cd accumulated in vascular ECs, ROS and lipid peroxidation levels were increased, and the oxidoreductase system was disturbed after exposure. Moreover, Cd decreased Gpx4 in ECs and caused smaller mitochondria with increased membrane density. Accompanied by ferroptosis, the number of ECs and the area of the caudal venous plexus in zebrafish embryos were reduced, and the survival rate of HUVECs decreased. These effects were partially reversed by ferrostatin-1 and aggravated by erastin. Mechanistically, an excessive increase in Heat Shock Protein 70 (Hsp70) was identified by transcriptomics after Cd exposure. Inhibition of Hsp70 by VER-155008 or siRNA ameliorated Cd-induced ferroptosis, thereby alleviating endothelial injury. Furthermore, Hsp70 regulated Cd-induced ferroptosis by targeting multiple targets, including Gpx4, Fth1, Nrf2 and Acsl4. Our findings provide a new approach to investigating the endothelial damage of Cd and indicate that regulation of Hsp70 is an important target for alleviating this process.

Distributions of trace elements within MSWI bottom and combined ash components: Implications for reuse practices

Concentrations of 25 inorganic elements were measured in both bulk ash and individual ash components from residuals at three municipal solid waste incineration (MSWI) facilities in the US (two combined ash (CA) and one bottom ash (BA)). Concentrations were assessed based on particle size and component to understand the contribution from each fraction. The results found that among facilities, the finer size fractions contained elevated concentrations of trace elements of concern (As, Pb, Sb) when compared to the coarse fraction, but concentrations varied among facilities depending on the type of ash and differences in advanced metals recovery processes. This study focused on several constituents of potential concern, As, Ba, Cu, Pb, and Sb, and found that the main components of MSWI ash (glass, ceramic, concrete, and slag) are sources of these elements in the ash streams. For many elements, concentrations were significantly higher in CA bulk and component fractions opposed to BA streams. An acid treatment procedure and scanning electron microscopy/energy-dispersive x-ray spectroscopy analysis revealed that some elements, such as As in concrete, are result of the inherent properties of the component, but other elements, such as Sb, form on the surface during or after incineration and can be removed. Some Pb and Cu concentrations were attributed to inclusions in the glass or slag introduced into the material during the incineration process. Understanding the contributions of each ash component provides critical information for developing strategies to reduce trace element concentrations in ash streams to promote reuse opportunities.

Plastic-associated metal(loid)s in the urban river environments of Mongolia

The widespread distribution of plastic debris in riverine environment is one of the major concerns of environmental pollution because of its potential impact on the aquatic ecosystem. In this study, we investigated the accumulation of metal(loid)s on polystyrene foam (PSF) plastics collected from the floodplain of the Tuul River of Mongolia. The metal(loid)s sorbed on plastics were extracted from the collected PSF via sonication after peroxide oxidation. The size-dependent association of metal(loid)s with plastics indicates that PSFs act as vectors for pollutants in the urban river environment. The mean concentrations of metal(loid)s (i.e., B, Cr, Cu, Na, and Pb) indicate a higher accumulation of the metal(loid)s on meso-sized PSFs compared with macro- and micro-sized PSFs. In addition, the images from scanning electron microscopy (SEM) indicated not only the degraded surface of plastics showing fractures, holes, and pits but also the adhered mineral particles and microorganisms on the PSFs. The interaction of metal(loid)s with plastics was probably facilitated by the physical and chemical properties of altered surface of plastics through photodegradation, followed by an increase in surface area by size reduction and/or biofilm development in the aquatic environment. The enrichment ratio (ER) of metals on PSF samples suggested the continuous accumulation of heavy metals on plastics. Our results demonstrate that the widespread plastic debris could be a carrier of hazardous chemicals in the environment. Considering that the negative impacts of plastic debris on environmental health are major concerns to be addressed, the fate and behavior of the plastics especially their interaction with pollutants in aquatic environments should be further studied.

Bioaccumulation for heavy metal removal: a review

This paper reviews plants and microorganisms removal of heavy metals from contaminated sites through bioaccumulation. Increased industrial activities have led to the uncontrolled release of metals into the environment, resulting in a global increase in metal pollution. Heavy metals are also consumed from the surface of glasses over a prolonged period of use. Heavy metal pollution is a serious problem that can have wide-ranging and long-lasting impacts on human health and the environment. Therefore, effective removal and remediation of heavy metal pollution are crucial to protect human and ecological health. Traditional methods of heavy metal removal, such as chemical treatment and physical removal, can be costly and can also have negative impacts on the environment. The utilization of plants and microorganisms for bioremediation of metal-polluted environments has proven effective for removing metals through accumulation and/or detoxification. This method is effective, economical, versatile, and environmentally friendly. Bioaccumulation utilizes plants and microorganisms to absorb and remove heavy metals from contaminated sites. This method is not only cost-effective but also helps to minimize the environmental impact of heavy metal pollution. Additionally, bioaccumulation can be used in combination with other techniques, such as phytostabilization and phytodegradation, to further improve the efficiency of heavy metal removal. The paper also discusses the use of plants and microorganisms in the removal of heavy metals from water and soil through biomagnification and bioconcentration. Techniques such as phytoaccumulation, phytostimulation, phytodegradation, phytovolatilization, phytostabilization, and phytofiltration are also discussed as effective ways of remediation of heavy metal contaminated sites.

Electrochemical detection of heavy metal ions in water

Heavy metal ions are one of the main sources of water pollution. Most heavy metal ions are carcinogens that pose a threat to both ecological balance and human health. With the increasing demand for heavy metal detection, electrochemical detection is favorable due to its high sensitivity and efficiency. Here, after discussing the pollution sources and toxicities of Hg(ii), Cd(ii), As(iii), Pb(ii), UO₂(ii), Tl(i), Cr(vi), Ag(i), and Cu(ii), we review a variety of recent electrochemical methods for detecting heavy metal ions. Compared with traditional methods, electrochemical methods are portable, fast, and cost-effective, and they can be adapted to various on-site inspection sites. Our review shows that the electrochemical detection of heavy metal ions is a very promising strategy that has attracted widespread attention and can be applied in agriculture, life science, clinical diagnosis, and analysis.

Overview of intentionally used food contact chemicals and their hazards

Food contact materials (FCMs) are used to make food contact articles (FCAs) that come into contact with food and beverages during, e.g., processing, storing, packaging, or consumption. FCMs/FCAs can cause chemical contamination of food when migration of their chemical constituents (known as food contact chemicals, FCCs) occurs. Some FCCs are known to be hazardous. However, the total extent of exposure to FCCs, as well as their health and environmental effects, remain unknown, because information on chemical structures, use patterns, migration potential, and health effects of FCCs is often absent or scattered across multiple sources. Therefore, we initiated a research project to systematically collect, analyze, and publicly share information on FCCs. As a first step, we compiled a database of intentionally added food contact chemicals (FCCdb), presented here. The FCCdb lists 12'285 substances that could possibly be used worldwide to make FCMs/FCAs, identified based on 67 FCC lists from publicly available sources, such as regulatory lists and industry inventories. We further explored FCCdb chemicals' hazards using several authoritative sources of hazard information, including (i) classifications for health and environmental hazards under the globally harmonized system for classification and labeling of chemicals (GHS), (ii) the identification of chemicals of concern due to endocrine disruption or persistence related hazards, and (iii) the inclusion on selected EU- or US-relevant regulatory lists of hazardous chemicals. This analysis prioritized 608 hazardous FCCs for further assessment and substitution in FCMs/FCAs. Evaluation based on non-authoritative, predictive hazard data (e.g., by in silico modeling or literature analysis) highlighted an additional 1411 FCCdb substances that could thus present similar levels of concern, but have not been officially classified so far. Lastly, for over a quarter of all FCCdb chemicals no hazard information could be found in the sources consulted, revealing a significant data gap and research need.

An overview of chemical contaminants and other undesirable chemicals in alcoholic beverages and strategies for analysis

The presence of chemical contaminant in alcoholic beverages is a widespread and notable problem with potential implications for human health. With the complexity and wide variation in the raw materials, production processes, and contact materials involved, there are a multitude of opportunities for a diverse host of undesirable compounds to make their way into the final product-some of which may currently remain unidentified and undetected. This review provides an overview of the notable contaminants (including pesticides, environmental contaminants, mycotoxins, process-induced contaminants, residues of food contact material [FCM], and illegal additives) that have been detected in alcoholic products thus far based on prior reviews and findings in the literature, and will additionally consider the potential sources for contamination, and finally discuss and identify gaps in current analytical strategies. The findings of this review highlight a need for further investigation into unwanted substances in alcoholic beverages, particularly concerning chemical migrants from FCMs, as well as a need for comprehensive nontargeted analytical techniques capable of determining unanticipated contaminants.

Nanotechnology-based approaches for food sensing and packaging applications

The rapid advancement of nanotechnology has provided opportunities for the development of new sensing and food packaging solutions, addressing long-standing challenges in the food sector to extend shelf-life, reduce waste, assess safety and improve the quality of food. Nanomaterials can be used to reinforce mechanical strength, enhance gas barrier properties, increase water repellence, and provide antimicrobial and scavenging activity to food packaging. They can be incorporated in chemical and biological sensors enabling the design of rapid and sensitive devices to assess freshness, and detect allergens, toxins or pathogenic contaminants. This review summarizes recent studies on the use of nanomaterials in the development of: (1) (bio)sensing technologies for detection of nutritional and non-nutritional components, antioxidants, adulterants and toxicants, (2) methods to improve the barrier and mechanical properties of food packaging, and (3) active functional packaging. The environmental, health and safety implications of nanomaterials in the food sector, along with an overview of regulation and consumer perception is also provided.

Antimony in paints and enamels of everyday items

Concentrations of antimony have been determined for paints and enamels that are available to the consumer or accessible to the public by x-ray fluorescence spectrometry. The metalloid was only present in consumer paints of a speciality (e.g. artistic) nature, but was common in old household paints as an anti-chalking agent and in brightly-coloured contemporary exterior paints (on roads, street furniture and playground equipment, for example) as a colour fastener with concentrations ranging from a few hundred to about 25,000 μg g^-1. Antimony was also found in contemporary container glass and ceramic products as an additive or opacifier and as a colour fastener in enamels at concentrations up to a few thousand μg g^-1. Overall, the yellow pigment, lead antimonate, was only evident in two ceramic products analysed, with Sb concentrations exceeding 62,800 μg g^-1. Available data in the literature suggests that, while Sb concentrations up to 30 μg g^-1 are bioaccessible in exterior paints and that concentrations of up to 20 mg L^-1 are migratable in some ceramicware, no relevant regulations are currently in place. Given our lack of understanding of the health impacts of Sb, more studies on its toxicity and mobility from commonly encountered products are called for.