Halogenated Organic Pollutant Residuals in Human Bared and Clothing-Covered Skin Areas: Source Differentiation and Comprehensive Health Risk Assessment

Human dermal exposure to short- and medium-chain chlorinated paraffins: Effect of populations, activities, gender, and haze pollution

Human dermal exposure to chlorinated paraffins (CPs) has not been well documented. Therefore, hand wipes were collected from four occupational populations to analyze short-chain CPs (SCCPs) and medium-chain CPs (MCCPs) in order to estimate dermal uptake and oral ingestion via hand-to-mouth contact. The total CP levels (∑SCCPs and ∑MCCPs) in wipes ranged from 71.4 to 2310 µg/m2 in security guards, 37.6 to 333 µg/m2 in taxi drivers, 20.8 to 559 µg/m2 in office workers, and 20.9 to 932 µg/m2 in undergraduates, respectively. Security guards exhibited the highest levels of ∑SCCPs among four populations (p < 0.01). In undergraduates engaged in outdoor activities, C13 emerged as the most dominant SCCPs homologue group, followed by C12, C11, and C10. The levels of ∑SCCPs and ∑MCCPs in males in light haze pollution were significantly higher than that in heavy haze pollution (p < 0.05). The median estimated dermal absorption dose of SCCPs and MCCPs via hand was 22.2 and 104 ng (kg of bw)-1 day-1, respectively, approximately 1.5 times the oral ingestion [12.3 and 74.4 ng (kg of bw)-1 day-1], suggesting that hand contact is a significant exposure source to humans.

Divergent redistribution behavior of divalent metal cations associated with Fe(II)-mediated jarosite phase transformation

The Fe(II)/Fe(III) cycle is an important driving force for dissolution and transformation of jarosite. Divalent heavy metals usually coexist with jarosite; however, their effects on Fe(II)-induced jarosite transformation and different repartitioning behavior during mineral dissolution-recrystallization are still unclear. Here, we investigated Fe(II)-induced (1 mM Fe(II)) jarosite conversion in the presence of Cd(II), Mn(II), Co(II), Ni(II) and Pb(II) (denoted as Me(II), 1 mM), respectively, under anaerobic condition at neutral pH. The results showed that all co-existing Me(II) retarded Fe(II)-induced jarosite dissolution. In the Fe(II)-only system, jarosite first rapidly transformed to lepidocrocite (an intermediate product) and then slowly to goethite; lepidocrocite was the main product. In Fe(II)-Cd(II), -Mn(II), and -Pb(II) systems, coexisting Cd(II), Mn(II) and Pb(II) retarded the above process and lepidocrocite was still the dominant conversion product. In Fe(II)-Co(II) system, coexisting Co(II) promoted lepidocrocite transformation into goethite. In Fe(II)-Ni(II) system, jarosite appeared to be directly converted into goethite, although small amounts of lepidocrocite were detected in the final product. In all treatments, the appearance or accumulation of lepidocrocite may be also related to the re-adsorption of released sulfate. By the end of reaction, 6.0 %, 4.0 %, 76.0 % 11.3 % and 19.2 % of total Cd(II), Mn(II), Pb(II) Co(II) and Ni(II) were adsorbed on the surface of solid products. Up to 49.6 %, 44.3 %, and 21.6 % of Co(II), Ni(II), and Pb(II) incorporated into solid product, with the reaction indicating that the dynamic process of Fe(II) interaction with goethite may promote the continuous incorporation of Co(II), Ni(II), and Pb(II).

Penetration pathways, influencing factors and predictive models for dermal absorption of exobiotic molecules: A critical review

This review provides a comprehensive summary of the skin penetration pathways of xenobiotics, including metals, organic pollutants, and nanoparticles (NPs), with a particular focus on the methodologies employed to elucidate these penetration routes. The impacts of the physicochemical properties of exogenous substances and the properties of solvent carriers on the penetration efficiencies were discussed. Furthermore, the review outlines the steady-state and transient models for predicting the skin permeability of xenobiotics, emphasizing the models which enable realistic visualization of pharmaco-kinetic phenomena via detailed geometric representations of the skin microstructure, such as stratum corneum (SC) (bricks and mortar) and skin appendages (hair follicles and sebaceous gland units). Limitations of published research, gaps in current knowledge, and recommendations for future research are highlighted, providing insight for a better understanding of the skin penetration behavior of xenobiotics and associated health risks in practical application contexts.

Advances in polychlorinated biphenyls-induced female reproductive toxicity

Polychlorinated biphenyls (PCBs) are a class of endocrine-disrupting chemicals (EDCs) widely present in the environment. PCBs have been of concern due to their anti/estrogen-like effects, which make them more toxic to the female reproductive system. However, there is still a lack of systematic reviews on the reproductive toxicity of PCBs in females, so the adverse effects and mechanisms of PCBs on the female reproductive system were summarized in this paper. Our findings showed that PCBs are positively associated with lower pregnancy rate, hormone disruption, miscarriage and various reproductive diseases in women. In animal experiments, PCBs can damage the structure and function of the ovaries, uterus and oviducts. Also, PCBs could produce epigenetic effects and be transferred to the offspring through the maternal placenta, causing development retardation, malformation and death of embryos, and damage to organs of multiple generations. Furthermore, the mechanisms of PCBs-induced female reproductive toxicity mainly include receptor-mediated hormone disorders, oxidative stress, apoptosis, autophagy, and epigenetic modifications. Finally, we also present some directions for future research on the reproductive toxicity of PCBs. This detailed information provided a valuable reference for fully understanding the reproductive toxicity of PCBs.

Quantitative characterization of resident' exposure to typical semi-volatile organic compounds (SVOCs) around a non-ferrous metal smelting plant

To comprehensively characterize residents' exposure to major semi-volatile organic compounds (SVOCs), samples of indoor floor wipes, size-segregated airborne particles, gaseous air, food, and paired skin wipes were simultaneously collected from residential areas around a large non-ferrous metal smelting plant as compared with the control areas, and three typical SVOCs (including polychlorinated biphenyls (PCBs), polycyclic aromatic hydrocarbons (PAHs), and halogenated PAHs (HPAHs)) were determined. Comparison and correlation analysis among matrices indicated PAHs were the major contaminants emitted from metal smelting activities compared to HPAHs and PCBs, with naphthalene verified as the most important characteristic compound, and their accumulation on skin may be a comprehensive consequence of contact with floor dust and air. While patterns of human exposure pathways for the SVOCs were found to be clearly correlated to their vapor pressure, dermal absorption was the major contributor (51.1-76.3%) to total carcinogenic risk (TCR) of PAHs and HPAHs for surrounding residents, especially for low molecular weight PAHs, but dietary ingestion (98.6%) was the dominant exposure pathway to PCBs. The TCR of PAHs exceeded the acceptable level (1 × 10-4), implying smelting activities obviously elevated the health risk. This study will serve developing pertinent exposure and health risk prevention measures.

Global patterns of human exposure to flame retardants indoors

To fill the knowledge gaps regarding the global patterns of human exposure to flame retardants (FRs) (i.e., brominated flame retardants (BFRs) and organophosphorus flame retardants (OPFRs)), data on the levels and distributions of FRs in external and internal exposure mediums, including indoor dust, indoor air, skin wipe, serum and urine, were summarized and analysed. Comparatively, FR levels were relatively higher in developed regions in all mediums, and significant positive correlations between FR contamination and economic development level were observed in indoor dust and air. Over time, the concentration of BFRs showed a slightly decreasing trend in all mediums worldwide, whereas OPFRs represented an upward tendency in some regions (e.g., the USA and China). The occurrence levels of FRs and their metabolites in all external and internal media were generally correlated, implying a mutual indicative role among them. Dermal absorption generally contributed >60% of the total exposure of most FR monomers, and dust ingestion was dominant for several low volatile compounds, while inhalation was found to be negligible. The high-risk FR monomers (BDE-47, BDE-99 and TCIPP) identified by external exposure assessment showed similarity to the major FRs or metabolites observed in internal exposure mediums, suggesting the feasibility of using these methods to characterize human exposure and the contribution of indoor exposure to the human burden of FRs. This review highlights the significant importance of exposure assessment based on multiple mediums for future studies.

A comprehensive assessment of external exposure to persistent halogenated organic pollutants for residents in an e-waste recycling site, South China

Human skin wipes from 30 participants, air, dust, and food items were collected from a former electronic waste site in South China to provide a comprehensive understanding of residents' exposure to halogenated flame retardants (HFRs) and polychlorinated biphenyls (PCBs). The total concentration of halogenated organic pollutants (HOPs) in the dust, air, food and skin wipes ranged 240-25000 ng/g, 130-2500 pg/m3, 0.08-590 ng/g wet weight, and 69-28000 ng/m2, respectively. Wild fish, vegetables, and air were dominated by PCBs, whereas dust, livestock, and poultry were dominated by HFRs. The HOP concentrations were several orders of magnitude higher in local foodstuffs than in market foodstuffs. The chemical composition on the forehead was remarkably different from that on the hand. The importance of different exposure routes depends on the residents' food choices, except decabromodiphenyl ethane (DBDPE). For residents who consumed a 100-foot diet (mainly egg) and local wild fish, diet ingestion overwhelmed other exposure routes, and PCBs were mainly contributed by fish and HFRs by egg. For residents who consumed market food, the dermal absorption of most PCB congeners and dust ingestion of highly brominated flame retardants were relatively prominent. Inhalation was found to be a crucial route for pentabromoethylbenzene (PBEB).

Multi-pathway exposure assessment of organophosphate flame retardants in a southern Chinese population: Main route identification with compound-specificity

In this study, we conducted comprehensive organophosphorus flame retardant (PFR) exposure assessments of both dietary and non-dietary pathways in a rural population in southern China. Skin wipes were collected from 30 volunteers. Indoor and outdoor air (gas and particles), dust in the houses of these volunteers, and foodstuffs consumed by these volunteers were simultaneously collected. The total PFR concentrations in dust, gas, and PM2.5 varied from 53.8 to 5.14 × 105 ng/g, 0.528 to 4.27 ng/m3, and 0.390 to 16.5 ng/m3, respectively. The forehead (median of 1.36 × 103 ng/m2) and hand (median of 920 ng/m2) exhibited relatively high PFR concentrations, followed by the forearm (median of 440 ng/m2) and upper arm (median of 230 ng/m2). The PFR concentrations in the food samples varied from 0.0700 to 10.9 ng/g wet weight in the order of egg > roast duck/goose and vegetable > pork > chicken > fish. Tris(1-chloro-isopropyl) phosphate (TCPP) was the main PFR in the non-diet samples, whereas the profiles of PFR individuals varied by food type. Among the multiple pathways investigated (inhalation, dermal exposure, dust ingestion, and food ingestion), dermal absorption and dust ingestion were the predominant pathways for tris(2-chloroethyl) phosphate (TCEP) and bisphenol A-bis(diphenyl phosphate) (BDP), respectively, whereas dietary exposure was the most important route for other chemicals.

Novel Models for Accurate Estimation of Air-Blood Partitioning: Applications to Individual Compounds and Complex Mixtures of Neutral Organic Compounds

The air-blood partition coefficient (Kab) is extensively employed in human health risk assessment for chemical exposure. However, current Kab estimation approaches either require an extensive number of parameters or lack precision. In this study, we present two novel and parsimonious models to accurately estimate Kab values for individual neutral organic compounds, as well as their complex mixtures. The first model, termed the GC×GC model, was developed based on the retention times of nonpolar chemical analytes on comprehensive two-dimensional gas chromatography (GC×GC). This model is unique in its ability to estimate the Kab values for complex mixtures of nonpolar organic chemicals. The GC×GC model successfully accounted for the Kab variance (R2 = 0.97) and demonstrated strong prediction power (RMSE = 0.31 log unit) for an independent set of nonpolar chemical analytes. Overall, the GC×GC model can be used to estimate Kab values for complex mixtures of neutral organic compounds. The second model, termed the partition model (PM), is based on two types of partition coefficients: octanol to water (Kow) and air to water (Kaw). The PM was able to effectively account for the variability in Kab data (n = 344), yielding an R2 value of 0.93 and root-mean-square error (RMSE) of 0.34 log unit. The predictive power and explanatory performance of the PM were found to be comparable to those of the parameter-intensive Abraham solvation models (ASMs). Additionally, the PM can be integrated into the software EPI Suite, which is widely used in chemical risk assessment for initial screening. The PM provides quick and reliable estimation of Kab compared to ASMs, while the GC×GC model is uniquely suited for estimating Kab values for complex mixtures of neutral organic compounds. In summary, our study introduces two novel and parsimonious models for the accurate estimation of Kab values for both individual compounds and complex mixtures.

Co-occurrence of phthalate and non-phthalate plasticizers in dust and hand wipes: A comparison of levels across various sources

E-waste dismantlers' occupational exposure to plasticizers, particularly non-phthalate (NPAE) plasticizers, is poorly understood. This study monitored 11 phthalates (PAEs) and 16 NPAEs in dust and hand wipe samples from Central China e-waste workplace and ordinary homes. Concentrations of plasticizers in dust from e-waste dismantling workshops (median: 217 μg/g) were significantly lower than that from ordinary homes (462 μg/g; p < 0.01), however, the trend was similar but not significant in hand wipes from these two scenarios (50.2 vs. 72.3 μg/m2; p = 0.139). PAEs were still the dominant plasticizers, which is, on average, 5.46 and 3.58-fold higher than NPAEs. In all samples, di-(2ethylhexyl) phthalate (65.4%) and tri-octyl trimellitate (44.9%) were the most common PAE and NPAE plasticizers. Increasing dust concentrations of di-iso-nonyl ester 1,2-cyclohexane dicarboxylic acid, citrates and sebacates were significantly associated with their levels in worker's hand wipe, by contrast, this trend was not found in general population. Dust ingestion was the main channel, followed by hand-to-mouth contact, all participants' daily plasticizer intakes (median: 154 ng/kg bw/day) are within safety limits. Our work highlights knowledge gaps about co-exposure to PAEs and NPAEs by multiple pathways in occupational e-waste workers, which could provide baseline data in the future.

Co-occurrence and distribution of organophosphate tri- and di-esters in dust and hand wipes from an e-waste dismantling plant in central China

Electronic waste (e-waste) dismantling facilities are a well-known source of emerging contaminants including organophosphate esters (OPEs). However, little information is available regarding the release characteristics and co-contaminations of tri- and di-esters. This study, therefore, investigated a broad range of tri- and di-OPEs in dust and hand wipe samples collected from an e-waste dismantling plant and homes as comparison. The median ∑tri-OPE and ∑di-OPE levels in dust and hand wipe samples were approximately 7- and 2-fold higher than those in the comparison group, respectively (p < 0.01). Triphenyl phosphate (median: 11,700 ng/g and 4640 ng/m²) and bis(2-ethylhexyl) phosphate (median: 5130 ng/g and 940 ng/m²) were the dominant components of tri- and di-OPEs, respectively. The combination of Spearman rank correlations and the determinations of molar concentration ratios of di-OPEs to tri- OPEs revealed that apart from the degradation of tri-OPEs, di-OPEs could originate from direct commercial application, or as impurities in tri-OPE formulas. Significant positive correlations (p < 0.05) were found for most tri- and di-OPE levels between the dust and hand wipes from dismantling workers, whereas this was not observed in those from the ordinary microenvironment. Our results provide robust evidence that e-waste dismantling activities contribute to OPEs contamination in the surroundings and further human exposure pathways and toxicokinetics are needed to be elucidated.

Electronic-waste-associated pollution of per- and polyfluoroalkyl substances: Environmental occurrence and human exposure

Occupational exposure to per- and polyfluoroalkyl substances (PFASs) is of serious concern because their adverse health effects. Nevertheless, knowledge regarding contamination in e-waste dismantling regions is rather scarce. We therefore analysed seven neutral PFASs (n-PFASs) and forty ionized PFASs (i-PFASs) in dust and hand wipes collected from an e-waste dismantling plant and homes. Both dust (1370 ng/g) and workers' hand wipe (1100 ng/m²) in e-waste dismantling workshops contained significantly higher median levels of ∑PFASs than those from homes (684 ng/g and 444 ng/m²) (p < 0.01). ∑PFAS concentrations in dust and on workers' hand wipes from workshops were significantly higher than those from storage area. 8:2 fluorotelomer alcohol was the dominant n-PFAS in workshop dust (70.7%) and on worker's hand wipes (46.6%). Perfluoroalkyl carboxylic acids (C2 -C3) were the significant components (based on concentration) of i-PFASs in dust (57.9%) and on hand wipes (89.6%). A significant positive correlation (p < 0.001) of ∑PFAS concentrations between workshop dust and workers' hand wipes was observed, indicating that they come from common sources. Compared to dust ingestion, hand-to-mouth contact was highlighted as a vital exposure route, accounting for 68.8% for workers and 72.2% for residential population, respectively, of the sum of two exposure doses.

Distribution of flame retardants among indoor dust, airborne particles and vapour phase from Beijing: spatial-temporal variation and human exposure characteristics

The occurrence and distribution of 10 brominated flame retardants (BFRs) and 10 organophosphate flame retardants (OPFRs) were investigated in indoor dust, total suspended particles (TSP), and vapour phase from offices (n = 10), homes (n = 9), and day-care centres (n = 10) in Beijing, China. Three types of samples were collected biweekly from one office and one home over a year to examine temporal trends. BFRs in dust significantly correlated with those in TSP, while OPFRs significantly correlated among all three matrices. In addition, BFRs in dust (ng/g) and TSP (pg/m³) exhibited similar temporal trends with higher levels in the cold season, whereas OPFRs in TSP and vapour phase (pg/m³) showed similar temporal trends with higher levels in the warm season. The geometric mean concentrations of BFRs and OPFRs in the three matrices from the above mentioned three types of indoor microenvironments were used for exposure and health risk estimation, and ∑₇OPFRs showed much higher hazard index (HI) values than ∑₁₀BFRs for all subpopulations, and inhalation of OPFRs was a major risk source. With the volatility of flame retardants (FRs) decreasing, the contribution of dust ingestion and dermal absorption showed an increasing trend, and the contribution of inhalation exhibited a gradual decreasing trend, which implied the dominant exposure pathway to FRs is strongly related to the vapour pressure (25 °C, Pa) of these substances. Using a single type of microenvironment or the collection of samples at a single point in time can lead to overestimation or underestimation of overall exposure and risk for people to some extent. The correlations of FRs in dust, TSP, and vapour phase from indoor microenvironments, as well as their temporal trends were first reported in this study, which will provide a basis for more accurate FR exposure assessments in the future.

Age- and sex-specific dermal exposure of polycyclic aromatic hydrocarbons in the general population of a city in south China

This study assessed the dermal exposure of population to polycyclic aromatic hydrocarbons (PAHs) in a South China city. Skin wipe samples of the face, hand, forearm, and shank were collected from 120 volunteers (50% male and 50% female) belonging to different age groups (preschooler, thresholder, middle-aged, and elderly). Concentrations of PAHs in the skin wipe samples varied from 18 to 27000 ng/m² in the order of face > hand > forearm > shank, regardless of age and gender. The PAH concentrations of bare skin locations were significantly higher in females than in males, while no significant differences were observed for clothing-covered skin locations between genders. The PAH concentrations for faces were significantly higher in the elderly compared to the other groups. The PAH composition was distinct between the four age groups. The dermal exposure levels of total PAHs and total BaP equivalent concentration (BaP_eq) varied from 25.6 to 620 and 0.093-37.4 ng/kg body weight/d, respectively. The dermal exposure levels of total PAHs were significantly higher in females than in males in all age groups except for the middle-aged group. The hand-mouth exposure doses were significantly higher in the preschoolers than in the other age groups. The values of the carcinogenic risk caused by dermal PAH exposure were between 3.5 × 10^-6 and 1.4 × 10^-3 with 29% of the population (35/120) having risk values exceeding significant levels (1 × 10^-4). The thresholder group exhibited the highest risk for PAH dermal exposure among all groups of the population. This study provides a comprehensive evaluation of the age- and gender-related risk of PAH through dermal exposure.

Indoor exposure to selected flame retardants and quantifying importance of environmental, human behavioral and physiological parameters

Indoor exposure to organic flame retardants (FRs) has raised extensive concern due to associated adverse health effects. Indoor-exposure induced daily intakes of six widely used FRs individually ranged 0.002-611 ng/day and 0.02-463 ng/day, respectively, for adults and 2-6-year-old children; and resulting internal exposure levels ranged 0.1-159 and 2.1-4500 ng/g lipid, respectively. A proportion of 0.001-5.9% and 0.006-10.3% of individual FRs emitted into indoor air ultimately entered bodies of adults and children respectively. Tris(2-chloroisopropyl)phosphate dominated in emissions, whilst 2-ethylhexyl-2,3,4,5-tetrabromobenzoate dominated in human bodies. Hand-to-mouth contact was the most important exposure pathway for less volatile FRs including most brominated FRs, whilst inhalation was the predominant intake pathway of tris(2-chloroisopropyl)phosphate. Relative importance of 29 environmental, behavioral and physiological parameters was ranked to explore key drivers influencing exposure and accumulation of FRs in humans. Results suggested that frequent bathing and handwashing can reduce exposure effectively, especially for children. Bodyweight and lipid fraction were only positively related to internal accumulation and body-weight-normalized concentrations of compounds with low metabolic rates (half-lives ≥10³ h) in humans. Our findings help control indoor exposure to FRs and are supportive of human exposome studies in the future.

Identification of Fluorescent Brighteners as Another Emerging Class of Abundant, Ubiquitous Pollutants in the Indoor Environment

Fluorescent brighteners (FBs) are extensively used as important chemical additives in multiple industrial fields worldwide. The history of the use of global FBs spans over 60 years, but knowledge on their environmental occurrence and risks remains largely unknown. Here, we screened indoor dust and hand wipes from South China for a broad suite of 17 emerging FBs using a new comprehensive analytical method. All 17 FBs were detected in the indoor environment for the first time, most of them having been rarely investigated or never reported in prior environmental studies. Ionic FBs were found to be more abundant than nonionic ones. The median total concentrations of the 17 detectable FBs reached 11,000 ng/g in indoor dust and 2640 ng/m² in hand wipes, comparable to or higher than those of well-known indoor pollutants. Human exposure assessment indicated that hand-to-mouth contact is a significant pathway for exposure to FBs, with a comparable contribution to that of dust ingestion. Most of the newly identified FBs are predicted to have persistent, bioaccumulative, or toxic properties. Our work demonstrates that FBs are another class of highly abundant, hazardous, and ubiquitous indoor pollutants that have been overlooked for decades and points to an emerging concern.

In utero exposure to decabromodiphenyl ethane causes rapid growth in mice cubs by activating glycogenolysis and lipid synthesis

Decabromodiphenyl ethane (DBDPE) as a novel brominated flame retardant is frequently detected in environmental media due to its widespread use. Studies have shown that exposure to environmental pollutants in utero could lead to weight loss in newborns and obesity in adulthood. However, the mechanisms of how the cubs grow rapidly from low birth weight to obesity remain unclear. Although it has been reported that perinatal DBDPE exposure caused obesity in the offspring of mice in adulthood, its metabolic changes in offspring juvenile are unknown. Here, we monitored changes of body weight in cubs following exposure to DBDPE in utero. Furthermore, ¹H NMR-based metabolomics was used to investigate the effects of in utero DBDPE exposure on the metabolic profile of neonates included days 1 and 25. Additionally, the expression levels of key genes in the relevant pathways were quantified. The results showed that exposure to high levels of DBDPE in utero caused cubs to be smaller at birth and grow rapidly during lactation. Metabolomics analysis showed that cubs in the exposed group consistently accelerated glycogenolysis and lipid synthesis to promote appetite and energy absorption, and achieved rapid growth in the subsequent lactation, which was further evidenced by the expression levels of genes related to glycolipid metabolism. These results reveal the mechanism for the first time how the weight loss of newborns in utero environmental pollutant exposure transformed into obesity in adulthood, although the exposures here were much higher than would be anticipated from the environment.

E-waste dismantling-related occupational and routine exposure to melamine and its derivatives: Estimating exposure via dust ingestion and hand-to-mouth contact

Melamine (MEL) and its derivatives are increasingly applied as nitrogenous flame retardants in consumer products. Nevertheless, limited information is available on their environmental occurrence and subsequent human exposure via multiple exposure pathways. In this study, we analysed MEL and its derivatives in dust (indication of the dust ingestion route) and hand wipe samples (indication of the hand-to-mouth route) collected in various microenvironments. The levels of ∑MELs in both dust (median: 24,100 ng/g) and participant hand samples (803 ng/m²) collected in e-waste dismantling workshops were significantly higher than those in samples collected in homes (15,600 ng/g and 196 ng/m², respectively), dormitories (13,100 ng/g and 227 ng/m², respectively) and hotel rooms (11,800 ng/g and 154 ng/m², respectively). Generally, MEL dominated in dust samples collected in e-waste dismantling workshops, whereas cyanuric acid dominated in hand wipe samples. This may occur partly because the latter is an ingredient in disinfection products, which are more frequently employed in daily lives during the COVID-19 pandemic. Exposure assessment suggests that dust ingestion is an important exposure pathway among dismantling workers and the general population, whereas hand-to-mouth contact could not be overlooked in certain populations, such as children and dismantling workers not wear gloves at work.

Gas-particle partition and size-segregated distribution of flame retardants in indoor and outdoor air: Reevaluation on the role of fine particles in human exposure

In this study, we investigated the distribution of brominated and organophosphate flame retardants (BFRs and OPFRs) in the paired gaseous and nine size-segregated particulate samples collected from 8 typical indoor compartments and monthly outdoor in Xinxiang, China, respectively. For the indoor environments, total concentrations of FRs (Σ₁₉FRs) in bulk air ranged from 3.9 ng/m³ to 37.5 ng/m³, with that in children recreation center (37.5 ng/m³) and furniture store (28.7 ng/m³) showing highest levels. In the outdoor air, Σ₁₉FRs ranged from 3.1 ng/m³ to 13.6 ng/m³ among the 12 months, with that from late spring and summer being the highest. OPFRs had higher concentration than BFRs, with the total concentration of OPFRs accounting for 77%-99% of ∑₁₉FRs. TCIPP (tris(chloroiso-propyl) phosphate), TCEP (tris(2-chloroethyl) phosphate), TEP (triethyl phosphate) and DBDPE (decabromodiphenyl ethane), BDE-209 (decabromodiphenyl ether) were the predominant analogs. Specifically, BFRs tended to enrich in gas phase indoors and coarse particles (aerodynamic diameters >3.3 μm) outdoors, but OPFRs mainly distributed in coarse particles both indoors and outdoors. The size distribution patterns varied among FRs, with the higher volatile FRs (e.g., TCEP, TCIPP) distributed more uniformly across particulate size. Although the distribution patterns of FRs in air were driven by multiple factors, organic carbon and element carbon in particulate matter had an influence to a certain extent. Health risks from exposure to FRs were characterized via the hazard quotient approaches. The total noncarcinogenic risks of ∑₁₆FRs from inhalation were higher than that from air to skin transport, and the risks resulted from coarse particle-bound ∑₁₆FRs (>3.3 μm) and gas phase were both significantly higher than that from fine fraction (<3.3 μm) in all scenarios, implying that FRs in coarse particles should not be underestimated.

Insight into phototransformation mechanism and toxicity evolution of novel and legacy brominated flame retardants in water: A comparative analysis

The novel brominated flame retardants (NBFRs) have become widespread as a consequence of the prohibition on the use of polybrominated diphenyl ethers (PBDEs). However, the transformation mechanism and potential environmental risk are largely unclear. In this study, we have explored the phototransformation behavior of the most abundant NBFRs, 1,2-bis(2,4,6-tribromophenoxy)ethane (BTBPE) in water under ultraviolet (UV) irradiation. Meanwhile, the legacy 2,2',4,4',6,6'-hexabromodiphenyl ether (BDE155) with similar structure was investigated contrastively. Results show that novel BTBPE is more persistent than legacy BDE155, with nearly four times slower photodegradation rate constants (0.0120 min^-1and 0.0447 min^-1, respectively). 18 products are identified in the phototransformation of BTBPE. Different from the only debrominated products formed in legacy BDE155 transformation, the ether bond cleavage photoproducts (e.g. bromophenols) are also identified in novel BTBPE transformation. Compound-specific stable isotope analysis (CSIA) confirms the phototransformation mechanism is mainly via debromination accompanying with the breaking of ether bond. Computational toxicity assessment implies that transformation products of BTBPE still have the high kidney risks. Especially the bromophenols formed via the ether bond cleavage could significantly increase the health effects on skin irritation. This study emphasizes the importance of understanding the photolytic behavior and potential risks of novel NBFRs and other structurally similar analogues.

Identifying dermal exposure as the dominant pathway of children's exposure to flame retardants in kindergartens

Exploration of multiple sources of brominated (BFRs) and organophosphate flame retardants (OPFRs) for children promotes the understanding of exposure pathways and health risk. 10 BFRs and 9 OPFRs were measured in skin wipes from hands, forehead, and arms of 30 children, and surface wipe samples from sills, toys, desks and floors, and indoor air samples of kindergartens from Xinxiang, China. Higher ∑₉OPFRs concentrations were observed in the forehead (1840 ng/m²), followed by hand (1420 ng/m²) and arm wipes (1130 ng/m²), and the ∑₈BFRs concentrations in forehead, hand and arm wipes were 116, 315 and 165 ng/m², respectively. The total concentration of OPFRs and BFRs in floor wipes (66.1 and 24.5 ng/m²) were lower than those in toy (205 and 535 ng/m²), sill (227 and 30.1 ng/m²) and desk (84.4 and 139 ng/m²) wipes. Concentrations of FRs in forehead wipes were significantly correlated with those in gaseous air (p < 0.05), moderate correlations were found between the hand wipes and surface wipes (p = 0.054). We estimated the daily average dosages (DADs) of children exposure to FRs via multiple pathways. Compared to DADs via inhalation and hand-to-mouth transfer, dermal exposure was determined to be the predominant exposure pathway to ∑₉OPFRs and ∑₈BFRs.

Measurement of polychlorinated biphenyls with hand wipes and matched serum collected from Chinese E-waste dismantling workers: Exposure estimates and implications

To date, dermal/hand-to-mouth exposure to chemicals in the e-waste recycling environment has not been sufficiently understood, and the importance of dermal absorption of chemicals in e-waste dismantling workers remains controversial. In this study, we utilized hand wipes and matched sera to characterize dermal/hand-to-mouth exposure to PCBs for e-waste dismantling workers, and potential effects on thyroid hormones were also assessed. PCB loadings in hand wipes varied from 0.829-265 ng wipe^-1 (11.3-2850 ng m^-2 wipe^-1), with 37.2 ng wipe^-1 (432 ng m^-2 wipe^-1) as the median value. Serum concentrations of PCBs ranged from 32.3-3410 ng g^-1 lipid weight (lw) with 364 ng g^-1 lw as the median value. Between wipes and sera, lower-chlorinated congeners (e.g. CB-28, -66, -74, -99,-105 and -118) showed significant associations (p < 0.01), but higher-chlorinated congeners (e.g. CB-138, -153, -156, -170, and -180) did not. These lower-chlorinated CBs were the major contributors to estimated dermal/hand-to-mouth average daily doses (ADDs) and the hazard index (HI). Correspondingly, their estimated contributions to serum levels by dermal absorption were also significant, with the contribution of CB-28 being as high as 21.4%. As a consequence, dermal absorption of some low-chlorinated congeners was a non-negligible route for e-waste dismantling workers. Although insignificant association was shown between serum PCBs and thyroid hormones, the potential health risk should be of concern due to the high levels of PCBs observed in workers' sera.

Pollution of plastic debris and halogenated flame retardants (HFRs) in soil from an abandoned e-waste recycling site: Do plastics contribute to (HFRs) in soil?

Electronic waste (e-waste) recycling site may be a "hotspot" for pollution of plastic debris, which has not been well studied. Eighteen halogenated flame retardants (HFRs) were measured in plastics and soil separated from twenty soil samples, respectively, from an abandoned e-waste recycling site. Abundances and concentrations of plastic debris ranged from 600 to 14,200 particles/kg and 0.24-153 mg/g, respectively, which were at the high end in literature. Blue, black, and red were main plastic colors, and acrylonitrile-butadiene-styrene (ABS) was the main type of plastics. Polybrominated diphenyl ether (PBDE) 209 was the main chemical, with median concentrations of 6.22-40.6 μg/g in soil and 28.1-47.2 μg/g in plastics, respectively. Contributions of HFRs in plastics were less than 10% in total HFR masses in bulk soil samples. Exposure values to HFRs from plastics via soil ingestion and dermal contact with soil were generally two orders of magnitude lower than those from soil. The results indicate that plastics in soil have little contribution to total HFR burden in soil and human exposure risks to HFRs in this study. However, ecological risks of plastics to terrestrial wildlife in e-waste sites should be paid attention.

Identifying dust as the dominant source of exposure to heavy metals for residents around battery factories in the Battery Industrial Capital of China

Heavy metals (HMs) are constantly released into the environment during the production and use of batteries. Battery manufacturing has been ongoing for over six decades in the "Battery Industrial Capital" (located in Xinxiang City) of China, but the potential exposure pathways of residents in this region to HMs remain unclear. To clarify the exposure pathways and health risk of human exposure to HMs, hand wipe samples (n=82) and fingernail samples (n=36) were collected from residents (including young children (0-6 years old), children (7-12 years old) and adults (30-60 years old)) living around battery factories. The total concentrations of the target HMs (Zn, Mn, Cu, Pb, Ni, Cr, Cd, Co) in hand wipes ranged from 133 to 8040 μg/m², and those in fingernails ranged from 9.7-566 μg/g. HM levels in the hand wipe and fingernail samples both decreased with age, and higher HM levels were observed for males than females. The HM composition profiles in these two matrices represented a high degree of similarity, with Zn as the predominant element, and thus, oral ingestion and dermal exposure via dust were expected to be the most important HM exposure pathways for residents in this region. The non-carcinogenic risks (HQs) from dermal and oral ingestion exposure to Cd, Cr, and Pb were higher than those of the other five elements for all three populations, and the HQ_derm of Cd for young children was 2.1 (HQ_oral=0.6). Moreover, the hazard index (HI) values of ∑₈HMs for young children (HI_total=5.2, HI_oral=2.0, HI_dermal=3.2) and children (HI_total=1.6, HI_oral=1.3, HI_dermal=0.3) exceeded the safe threshold (1.0). Therefore, young children and children should be prioritized for protection from HM pollution, and more attention should be paid to young children's dermal exposure to Cd in this region.

Field study of PAHs with their derivatives emitted from e-waste dismantling processes and their comprehensive human exposure implications

Extensive electronic waste (e-waste) recycling might be an important emission source of polycyclic aromatic hydrocarbons (PAHs) mixture, which might induce negative effects on the employees. In the present work, atmospheric pollution patterns of PAHs and their derivatives were determined in five different workshops to dismantle waste printed circuit boards (WPCBs) via thermal treatment. The results showed that mass concentrations of PAHs, chlorinated PAHs (ClPAHs), brominated PAHs (BrPAHs), oxy-PAHs (OPAHs) as well as carbazole (CBZ) were ranged from 1.53 × 10⁴-2.02 × 10⁵, 32.3-364, 8.29-1.13 × 10³, 923-1.39 × 10⁴ and 225-1.95 × 10³ pg·m^-3, respectively. Electric heating furnaces (EHF) workshops emitted relatively higher contaminants than other disposal sectors. OPAHs was found to be the most predominant derivatives of PAHs with 9,10-anthraquinone (83.0%) has the absolute superior in EHFTV, while benzo(a)anthracene-7,12-dione (>45.0%) was found to be the highest congener in other workshops, respectively. 9,10-Cl₂Phe exhibited the largest contributions to the ΣClPAHs whereas the composition profiles of BrPAHs varied among five workshops. In addition to direct chlorination of parent PAHs, thermal degradation of halogenated flame retardants incorporated into plastic materials might dominate the generation of Cl/BrPAHs from e-waste dismantling activities. The specific isomeric ratios of BrPAHs (3-BrFlu/1-BrPyr and 1-BrPyr/3-BrFlu) might be used to discriminate other emission sources from pyrolysis of WPCBs. However, their specific application as novel tracers for source identification should be further verified with more studies. The emitted PAHs mixture with their derivatives in all dismantling workshops posed carcinogenic risks to these dismantling workers via inhalation, particularly the workshop using electric heating furnaces to treat router. Nevertheless, new loadings of PAHs derivatives observed from e-waste dismantling activities, as well as their comprehensive health risk assessment provides us with a fresh perspective on the source appointment and potential adverse consequences of PAHs. More attention needs to be paid to the potential carcinogenic risks of exposure to PAHs and their derivatives from e-waste dismantling processes.

Enzymatic assays for the assessment of toxic effects of halogenated organic contaminants in water and food. A review

Halogenated organic compounds are a particular group of contaminants consisting of a large number of substances, and of great concern due to their persistence in the environment, potential for bioaccumulation and toxicity. Some of these compounds have been classified as persistent organic pollutants (POPs) under The Stockholm Convention and many toxicity assessments have been conducted on them previously. In this work we provide an overview of enzymatic assays used in these studies to establish toxic effects and dose-response relationships. Studies in vivo and in vitro have been considered with a particular emphasis on the impact of halogenated compounds on the activity of relevant enzymes to the humans and the environment. Most information available in the literature focuses on chlorinated compounds, but brominated and fluorinated molecules are also the target of increasing numbers of studies. The enzymes identified can be classified as enzymes: i) the activities of which are affected by the presence of halogenated organic compounds, and ii) those involved in their metabolisation/detoxification resulting in increased activities. In both cases the halogen substituent seems to have an important role in the effects observed. Finally, the use of these enzymes in biosensing tools for monitoring of halogenated compounds is described.

Complex Mixtures of Chlorinated Paraffins Found in Hand Wipes of a Norwegian Cohort

Up to 18000 ng of total chlorinated paraffins (CPs) was found in hand wipes of individual adult participants in a Norwegian cohort study (n = 60), with a geometric mean (SD) value of 870 (2700) ng. The CPs covered a wide range of alkane chain lengths from C₇ to C₄₈ with variable chlorine substitution. Complex mixtures of very-short-chain (vSCCPs, C_<10), short-chain (SCCPs, C_10-13), medium-chain (MCCPs, C_14-17), and long-chain (LCCPs, C_>17) CPs were found, contributing on average 0.3%, 20%, 58%, and 22%, respectively, of the total CPs. Significant positive correlations were found between CP levels and factors related to the indoor environment and product use, including living in a house/apartment built before the ban of SCCPs, having a sofa, the number of TVs in the home, and owning a car, which mirrors CP usage as flame retardants and/or plasticizers in consumer products. Compared to previous studies of other organic contaminants in hand wipe samples from the same cohort, CPs were the most abundant flame retardants. This is the first report of CPs in hand wipes, and dermal exposure based on these data suggested that hand contact could be an important human exposure pathway for LCCPs.