Preferential Nitrate Removal from Water Using a New Recyclable Polystyrene Adsorbent Functionalized with Triethylamine Groups

Enhanced phosphate removal from water by hydrated neodymium oxide-based nanocomposite: Performance, mechanism, and validation

Phosphorus (P) control has been recognized as an imperative task to mitigate water eutrophication and settle the imminent shortage of P resources. Despite intensive effort put into this matter, it is still generally challenging for the current methods to remove and even potentially recover phosphorus (as phosphate) from complicated water matrices. To this end, we proposed a novel nanocomposite via coupling polystyrene anion exchanger (PsAX) with hydrated neodymium oxide (HNdO) nanoparticle for selective removal of phosphate. The developed nanocomposite, i.e., HNdO-PsAX, exhibited quite stable and efficient phosphate adsorption over a wide pH range of 3.0-10.0 with the maximum adsorption capacity as 85.4 mg P/g. It also showed satisfied anti-interference against various competing substances; notably, HNdO-PsAX obviously outperformed Phoslock, a commercial lanthanum-based adsorbent exclusively for phosphate sequestration, particularly under the interference of bicarbonate and humic acid, which were admitted as the paralyzing factors for Phoslock. The superior affinity of HNdO-PsAX towards phosphate, driven by the specific Nd-P inner-sphere complexation as evidenced by XPS, FT-IR, and the lattice evolution of HNdO nanoparticle, renders the nanocomposite eminently suitable for sequestrating trace phosphate. Fixed-bed treatment validated that HNdO-PsAX was capable of treating ∼11,800 bed volume of a simulated wastewater (from 2.0 to below 0.5 mg P/L), approximately 12 times higher than that of the previously reported Fe-based nanocomposite (HFO-PsAX, ∼ 900 BV); also, a satisfactory outcome in treating authentic municipal wastewater by HNdO-PsAX and the feasibility of regenerating the exhausted one by a binary NaOH-NaCl solution were recognized. This work provides a new potion of enhanced phosphorous control for surface water and wastewater.

Modified Hazelnut Shells as a Novel Adsorbent for the Removal of Nitrate from Wastewater

The aim of the study was to prepare a novel adsorbent by chemical modification of hazelnut shells and evaluate its potential for the nitrate removal from model solutions and real wastewater. The characterization of the novel adsorbent, i.e., modified hazelnut shell (MHS) was performed. The adsorbent characterization included the analysis of elemental composition and the surface characteristics analysis by scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR). The adsorption experiments (batch technique) were performed to investigate the effects of adsorbent concentration, contact time, initial nitrate concentration, and solution pH. The nitrate removal efficiency increased with the increase in MHS concentration and decreased with the initial nitrate concentration. MHS was found to be effective in nitrate removal over a wide pH range (from 2 to 10), and the highest amount of nitrate adsorbed was 25.79 mg g−1 in a model nitrate solution. Depending on the aqueous medium (model solutions or real wastewater samples), it was shown that both Langmuir and Freundlich adsorption isotherm models can be used to interpret the adsorption process. It was found that the kinetics are well described by a pseudo-second order model and the nitrate adsorption process can be controlled by chemisorption. The intraparticle diffusion model has been used to identify an adsorption-controlled process by diffusion mechanisms. Adsorption/desorption experiments in column confirmed that MHS could be successfully used in multiple cycles (at least three), indicating the potential of MHS as an alternative to costly commercial adsorbents for the removal of nitrates from wastewater.

A critical review of various adsorbents for selective removal of nitrate from water: Structure, performance and mechanism

Nitrate is ubiquitous pollutant due to its high water solubility, usually contributing to eutrophication, and posing a threat to aquatic ecosystem and human health. Adsorption approach has been widely used for nitrate removal because of the simplicity, easy operation, and low cost. Adsorbent plays a key role in the adsorptive removal of nitrate. The adsorption performance and adsorption mechanism are determined by the structural feature of adsorbent that is dependent on the preparation method. In this review, various types of adsorbents for nitrate removal were systematically summarized, their preparation, characterization, and adsorption performance were evaluated; the factors influencing the nitrate adsorption performance were discussed; the adsorption isotherm models, kinetic models and thermodynamic parameters were examined; and the possible adsorption mechanisms responsible for nitrate adsorption were categorized; the possible correlation of adsorbent structure to adsorption performance and adsorption mechanism were explained; the potential applications of adsorbents were discussed; finally, the strategies for improving adsorption capacity and selectivity towards nitrate, the challenges and future perspectives for developing novel adsorbent were also proposed. This review will deepen the understanding of nitrate removal by adsorption process and help the development of high-performance adsorbents for selective nitrate removal from water and wastewater.

Nitrates in the environment: A critical review of their distribution, sensing techniques, ecological effects and remediation

Nitrate pollution is eminent in almost all the developing nations as a result of increased natural activities apart from anthropogenic pollution. The release of nitrates in more than critical quantities into the water bodies causes accretion impacts on living creatures, environmental receptors, and human vigour by accumulation through the food chain. Nitrates have recently acquired researchers' huge attention and extend their roots in environmental contamination of surface and groundwater systems. The presence of nitrate in high concentrations in surface and groundwater triggers several health problems, for instance, methemoglobinemia, diabetes, eruption of infectious disorders, harmfully influence aquatic organisms. Sensing nitrate is an alternate option for monitoring the distribution of nitrate in different water bodies. Here we review electrochemical, spectroscopic, and electrical modes of nitrate sensing. It is concluded that, among the various sensors discussed in this review, FET sensors are the most desirable choice. Their sensitivity, ease of use and scope for miniaturisation are exceptional. Advanced functional materials need to be designed to satiate the growing need for environmental monitoring. Different sources of nitrate contamination in ground and surface water can be estimated using different techniques such as nitrate isotopic composition, co contaminants, water tracers, and other specialized techniques. This review intends to explore the research work on remediation of nitrate from wastewater and soil using different processes such as reverse osmosis, chemical denitrification, biological denitrification, ion exchange, electrodialysis, and adsorption. Denitrification proves as a promising alternative over previously reported techniques in terms of their nitrate removal because of its high cost-effectiveness.

A review on water treatment technologies for the management of oxoanions: prospects and challenges

Oxoanions are a class of contaminants that are easily released into the aquatic systems either through natural or anthropogenic activities. Depending on their oxidation states, they are highly mobile, resulting in the contamination of underground water. Above the permissible level in groundwater, they pose as threats to mammals when the contaminated water is consumed. Some of the health challenges caused are cancer, neurological, cardiac, gastrointestinal, and skin disorders. Several treatment technologies have been adopted over the years for the management of these oxoanions present in the aquatic systems. However interesting these treatment technologies might be, they also have their limitations such as cost-effectiveness, the complexity of the process, and generation of secondary pollutants. This work focused on some of the water treatment technologies applied for the removal of oxoanions. Some of the advantages and disadvantages of these treatment technologies are also highlighted. Amongst all the treatment technologies, adsorption is the most applied method for the removal of oxoanions. However, photocatalysis has a higher prospect since it is non-selective and secondary pollutants are not generated after the treatment process. Also, photocatalysis can simultaneously reduce and oxidise oxoanions as well as organic pollutants respectively.

Modified Grape Seeds: A Promising Alternative for Nitrate Removal from Water

The aim of this work was to investigate grape seeds as a potential adsorbent for nitrate removal from water. Grape seeds were modified by quaternization and the applicability of the modified grape seeds (MGS) was evaluated in batch adsorption experiments. Fixed bed adsorption and regeneration studies were carried out to determine the regeneration capacity of MGS. The maximum adsorption capacity of 25.626 mg g⁻¹ at native pH (6.3) for nitrate removal by MSG was comparable to that of the commercial anion exchange resin Relite A490 under similar conditions. The percent removal of nitrate from model nitrate solution was 86.47% and 93.25% for MGS, and Relite A490, respectively, and in synthetic wastewater 57.54% and 78.37%. Analysis of the batch adsorption data using isotherm models revealed that the Freundlich model provided a better fit to the data obtained than the Langmuir model, indicating multilayer adsorption. In kinetic terms, the results showed that the adsorption followed the pseudo-first order model. By investigating the adsorption mechanism, the results suggest that the intraparticle diffusion model was not the only process controlling the adsorption of nitrate on MGS. In column experiments (adsorption/desorption studies), three adsorption cycles were tested with minimal decrease in adsorption capacities, implying that this alternative adsorbent can be successfully regenerated and reused.

Removal of hazardous dyes, toxic metal ions and organic pollutants from wastewater by using porous hyper-cross-linked polymeric materials: A review of recent advances

Water quality plays a central role in the well-being of all the living organisms on planet Earth. The ever-increasing human population and consequently increasing industrialization, urbanization, and chemically boosted cultivation are rapidly contaminating already stressed water resources. The availability of clean drinking water has become scarce for masses across the globe, and this situation is becoming alarming in developing countries. Therefore, the immediate need for cost-effective, easily accessible, eco-friendly, portable, thermally efficient, and chemically stable technologies and materials is desperately felt to meet the high global demand for clean water. To search for effective materials for wastewater treatment, the hyper-cross-linked porous polymers (HCPs) have emerged as an excellent class of porous materials for wastewater treatment due to their unique features of high surface area, tunability, biodegradability, and chemical versatility. This review describes the advances in fabrication strategies and the efficient utilization of hyper-cross-linked porous polymers for wastewater treatment. Moreover, this review specifically discusses the hyper-cross-linked porous polymers effectiveness for the separation of the dyes, nutrients, inorganic ions, organic contaminants, and toxic metals ions. Finally, the review provides insight into the challenges and prospects in the area of hyper-cross-linked porous polymers. Overall, the hyper-cross-linked porous polymers with empowering proper functionalization can provide an opportunity for the wastewater treatment not only to remove toxic contaminants but also to make contaminated water useful for various applications.