Controlled Fabrication of the Biomass Cellulose–CeO2 Nanocomposite Membrane as Efficient and Recyclable Adsorbents for Fluoride Removal

Nanocellulose-Based Materials for Water Pollutant Removal: A Review

Cellulose in the nano regime, defined as nanocellulose, has been intensively used for water treatment. Nanocellulose can be produced in various forms, including colloidal, water redispersible powders, films, membranes, papers, hydrogels/aerogels, and three-dimensional (3D) objects. They were reported for the removal of water contaminants, e.g., heavy metals, dyes, drugs, pesticides, pharmaceuticals, microbial cells, and other pollutants from water systems. This review summarized the recent technologies for water treatment using nanocellulose-based materials. A scientometric analysis of the topic was also included. Cellulose-based materials enable the removal of water contaminants, and salts offer advanced technologies for water desalination. They are widely used as substrates, adsorbents, and catalysts. They were applied for pollutant removal via several methods such as adsorption, filtration, disinfection, coagulation/flocculation, chemical precipitation, sedimentation, filtration (e.g., ultrafiltration (UF), nanofiltration (NF)), electrofiltration (electrodialysis), ion-exchange, chelation, catalysis, and photocatalysis. Processing cellulose into commercial products enables the wide use of nanocellulose-based materials as adsorbents and catalysts.

Fixed-bed column adsorption modeling using Zr biocomposites for fluoride removal

This research involved conducting continuous adsorption experiments to assess fluoride elimination from drinking water achieved by utilizing biocomposites created from the peels of oranges and apples, which were impregnated with zirconium (Zr), to form BOP-Zr and BAP-Zr, respectively. The findings from the experimental data indicate that BOP-Zr and BAP-Zr are effective biosorbents with a solid ability to remove fluoride selectively. Additionally, these biosorbents were found to be stable, as they do not release Zr into the treated water. Notably, these environmentally friendly biosorbents are derived from renewable sources and enhance the value of waste materials. The study employed various empirical models, including Bohart-Adamas, Thomas, Yoon-Nelson, BDST, Clark, Yan, and Woolborska, to elucidate the mechanisms and crucial parameters involved in fluoride adsorption within packed bed columns. The Yan model demonstrated the highest correlation among these models, indicating a chemical adsorption process with kinetics following a pseudo-second-order pattern. BOP-Zr and BAP-Zr exhibited a maximum adsorption capacity of 59.3 and 47.5 mg/g, respectively, under a flow rate of 4 mL/min and an inlet fluoride concentration of 25 mg/L. The analysis of mass transfer coefficients revealed that the primary step governing the adsorption procedure was diffusion through pores. Consequently, the study conclusively establishes that BOP-Zr and BAP-Zr biocomposites, originating from lignocellulosic biomass remains, present a practical and competitive choice for eliminating fluoride from water. These materials surpass waste materials in performance and rival more expensive options in efficiency and performance.

Agricultural Residues as Raw Materials for Pulp and Paper Production: Overview and Applications on Membrane Fabrication

The need for pulp and paper has risen significantly due to exponential population growth, industrialization, and urbanization. Most paper manufacturing industries use wood fibers to meet pulp and paper requirements. The shortage of fibrous wood resources and increased deforestation are linked to the excessive dependence on wood for pulp and paper production. Therefore, non-wood substitutes, including corn stalks, sugarcane bagasse, wheat, and rice straw, cotton stalks, and others, may greatly alleviate the shortage of raw materials used to make pulp and paper. Non-woody raw materials can be pulped easily using soda/soda-AQ (anthraquinone), organosolv, and bio-pulping. The use of agricultural residues can also play a pivotal role in the development of polymeric membranes separating different molecular weight cut-off molecules from a variety of feedstocks in industries. These membranes range in applications from water purification to medicinal uses. Considering that some farmers still burn agricultural residues on the fields, resulting in significant air pollution and health issues, the use of agricultural residues in paper manufacturing can eventually help these producers to get better financial outcomes from the grown crop. This paper reviews the current trends in the technological pitch of pulp and paper production from agricultural residues using different pulping methods, with an insight into the application of membranes developed from lignocellulosic materials.

Lignocellulosic Biomass as Sorbent for Fluoride Removal in Drinking Water

Water supply to millions of people worldwide is of alarmingly poor quality. Supply sources are depleting, whereas demand is increasing. Health problems associated with water consumption exceeding 1.5 mg/L of fluoride are a severe concern for the World Health Organization (WHO). Therefore, it is urgent to research and develop new technologies and innovative materials to achieve partial fluoride reduction in water intended for human consumption. The new alternative technologies must be environmentally friendly and be able to remove fluoride at the lowest possible costs. So, the use of waste from lignocellulosic biomasses provides a promising alternative to commercially inorganic-based adsorbents-published studies present bioadsorbent materials competing with conventional inorganic-based adsorbents satisfactorily. However, it is still necessary to improve the modification methods to enhance the adsorption capacity and selectivity, as well as the reuse cycles of these bioadsorbents.

A critical review on adsorption and recovery of fluoride from wastewater by metal-based adsorbents

Rapid industrialization is deteriorating water quality, and fluoride pollution in water is one of the most serious environmental pollution problems. Adsorption technology is an efficient and selective process for removing fluoride from aqueous solutions using adsorbents. Metal-based adsorbents synergize the advantages of fast adsorption, high adsorption capacity, and excellent selectivity to effectively remove fluoride from water bodies, promising to satisfy environmental sustainability requirements. This paper reviews the metal-based adsorbents: iron-based, aluminum-based, lanthanum-based, cerium-based, titanium-based, zirconium-based, and multi-metal composite adsorbents, primarily focusing on the adsorption conditions and fluoride removal capacities and discusses prospects and challenges in the synthesis and application of metal-based adsorbents. This paper aims to stimulate new thinking and innovation in developing the next generation of sustainable adsorbents.

Robust and Multifunctional 3D Graphene-Based Aerogels Reinforced by Hydroxyapatite Nanowires for Highly Efficient Organic Solvent Adsorption and Fluoride Removal

In view of the serious perniciousness and complex diversity of actual wastewater systems, exploiting a robust and multifunctional adsorbent material featuring high sorption efficiency, broad-spectrum applicability, and excellent recyclability in treating multifarious pollutants in water (such as oils and fluoride ions) is highly required; however, it is still a daunting goal to pursue to date. In this work, novel mechanically robust and exceptional graphene oxide/hydroxyapatite nanowire (GO/HAPNW) aerogels (RGHAs/polydopamine (PDA)@RGHAs) with adjustable surface wettability were developed through a facile sol-gel self-assembly technology and subsequently optional bioinspired hydrophilic modification. Thanks to the reinforcing effect of HAPNWs with higher aspect ratio, a remarkably improved mechanical robustness (including superior compressibility and superelasticity) was acquired for the resulting aerogels. Based on the cooperative effect of the favorable selective wetting properties (i.e., hydrophobic/oleophilic for RGHAs) and the excellent mechanic stability, the aerogels displayed an outstanding sorption performance for diverse oils/organic solvents accompanied with a prominent recyclability. Specifically, a fairly high adsorption capacity of as high as 191 times of its own mass (for pump oil) was achieved based on a fast adsorption kinetic process. More importantly, superamphiphilic three-dimensional (3D) PDA@RGHAs revealed an extraordinary removal capability for water-soluble fluoride ions, exhibiting a superior equilibrium adsorption capacity (q_e, 9.93 mg/g), which is distinctly superior to those of low-dimensional fluorine adsorbent materials recently reported. Accordingly, the as-prepared 3D aerogels combining both superior oil/organic solvent adsorption and excellent defluorination capability reveal a competitive application prospect toward effective intricate oily wastewater purification.

Recovery, regeneration and sustainable management of spent adsorbents from wastewater treatment streams: A review

Adsorption is the most widely adopted, effective, and reliable treatment process for the removal of inorganic and organic contaminants from wastewater. One of the major issues with the adsorption-treatment process for the removal of contaminants from wastewater streams is the recovery and sustainable management of spent adsorbents. This review focuses on the effectiveness of emerging adsorbents and how the spent adsorbents could be recovered, regenerated, and further managed through reuse or safe disposal. The critical analysis of both conventional and emerging adsorbents on organic and inorganic contaminants in wastewater systems are evaluated. The various recovery and regeneration techniques of spent adsorbents including magnetic separation, filtration, thermal desorption and decomposition, chemical desorption, supercritical fluid desorption, advanced oxidation process and microbial assisted adsorbent regeneration are discussed in detail. The current challenges for the recovery and regeneration of adsorbents and the methodologies used for solving those problems are covered. The spent adsorbents are managed through regeneration for reuse (such as soil amendment, capacitor, catalyst/catalyst support) or safe disposal involving incineration and landfilling. Sustainable management of spent adsorbents, including processes involved in the recovery and regeneration of adsorbents for reuse, is examined in the context of resource recovery and circular economy. Finally, the review ends with the current drawbacks in the recovery and management of the spent adsorbents and the future directions for the economic and environmental feasibility of the system for industrial-scale application.

Removal of chloride from water and wastewater: Removal mechanisms and recent trends

Increased chloride concentration can cause salinization, which has become a serious and widespread environmental problem nowadays. This review aims at providing comprehensive and state-of-the-art knowledge and insights of technologies for chloride removal. Mechanisms for chloride removal mainly include chemical precipitation, adsorption, oxidation and membrane separation. In chemical precipitation, chloride removal by forming CuCl, AgCl, BiOCl and Friedel's salt. Adsorbents used in chloride removal mainly include ion exchangers, bimetal oxides and carbon-based electrodes. Oxidation for chloride removal contains ozone-based, electrochemical and sulfate radical-based oxidation. Membrane separation for chloride removal consists of diffusion dialysis, nanofiltration, reverse osmosis and electrodialysis. In this review, we specifically proposed the factors that affect chloride removal process and the corresponding strategies for improving removal efficiency. In the last section, the remaining challenges of method explorations and material developments were stated to provide guidelines for future development of chloride removal technologies.

Biomimetic Organic-Inorganic Hybrid Membranes for Removal of Fluoride Ions

Carbon nanofibers (CaNFs) exhibit promising applications in the fields of environmental science and nanotechnology, and self-assembled peptide nanofibers (PNFs) are useful for the biomimetic synthesis of organic-inorganic hybrid nanomaterials and the fabrication of functional hybrid membranes for the removal of various pollutants from water. In this work, we report the biomimetic synthesis of hybrid nanomaterials by the interweaving of CaNFs and PNFs. Using the biomimetic mineralization properties of PNFs, ZrO₂ nanoparticles were synthesized along the nanofiber surface, and then functional nanohybrid porous membranes were prepared by the vacuum filtration technology. For the fabrication of membranes, the amount of PNFs and ZrO₂ precursors in the hybrid membrane were optimized. The designed organic-inorganic hybrid membranes exhibited high removal performance for fluorine ion (F⁻) from water, and the removal efficiency of the fabricated membranes towards F⁻ ion-containing aqueous solution with a concentration of 50–100 mg/L reached more than 80%. In addition, the nanofiltration membranes revealed good adsorption capacity for F⁻ ions. It is expected that the strategies shown in this study will be beneficial for the design, biomimetic synthesis, and fabrication of nanoporous membranes for economic, rapid, and efficient water purification.

Efficient separation of bagasse lignin by freeze-thaw-assisted p-toluenesulfonic acid pretreatment

Lignin separation is an important procedure that benefits multiple industries and in particular biomass transformation efforts. In this study, bagasse lignin was separated by freeze-thaw-assisted p-toluenesulfonic acid (p-TsOH) pretreatment. The optimal conditions were freezing temperature -60 °C, freezing time 8.0 h, thawing temperature 15 °C, p-TsOH concentration 60%, pretreatment temperature 70 °C, and time 20 min. Lower acid concentrations and temperatures were used compared with traditional p-TsOH pretreatment. The efficiency and selectivity of lignin separation were improved. It was attributed to freeze-thawing, which provided a more efficient physical channel for the effective penetration of p-TsOH. The separation, extraction and purity of lignin were improved to 89.76%, 78.22% and 77.89%, respectively. High separation, high extraction, high purity and large molecular weight lignin samples were obtained. In addition, the recovery and reuse of p-TsOH was enhanced. This provided a new method for the efficient and clean separation of lignin.

Cellulose-Based Materials for Water Remediation: Adsorption, Catalysis, and Antifouling

Cellulose-based materials have been advanced technologies that used in water remediation. They exhibit several advantages being the most abundant biopolymer in nature, high biocompatibility, and contain several functional groups. Cellulose can be prepared in several derivatives including nanomaterials such as cellulose nanocrystals (CNCs), cellulose nanofibrils (CNFs), and TEMPO (2,2,6,6-tetramethylpiperidine-1-oxyl radical)-mediated oxidized cellulose nanofibrils (TOCNF). The presence of functional groups such as carboxylic and hydroxyls groups can be modified or grafted with organic moieties offering extra functional groups customizing for specific applications. These functional groups ensure the capability of cellulose biopolymers to be modified with nanoparticles such as metal-organic frameworks (MOFs), graphene oxide (GO), silver (Ag) nanoparticles, and zinc oxide (ZnO) nanoparticles. Thus, they can be applied for water remediation via removing water pollutants including heavy metal ions, organic dyes, drugs, and microbial species. Cellulose-based materials can be also used for removing microorganisms being active as membranes or antibacterial agents. They can proceed into various forms such as membranes, sheets, papers, foams, aerogels, and filters. This review summarized the applications of cellulose-based materials for water remediation via methods such as adsorption, catalysis, and antifouling. The high performance of cellulose-based materials as well as their simple processing methods ensure the high potential for water remediation.