Metal–Organic Framework UiO-66 as an Efficient Adsorbent for Boron Removal from Aqueous Solution

Synthesis of a metal-organic framework Cu-Mi-UiO-66-based fluorescent nanoprobe for the simultaneous sensing and intracellular imaging of GSH and ATP

This study reports a fluorescent nanoprobe operated in fluorescence turn-on mode for simultaneously sensing and imaging intracellular GSH and ATP. By using maleimide-derivatives as the ligand, the bimetallic nanoscale metal-organic framework (NMOF) Cu-Mi-UiO-66 has been synthesized for the first time using a straightforward one-step solvothermal approach, serving as a GSH recognition moiety. Subsequently, a Cy5-labeled ATP aptamer was assembled onto Cu-Mi-UiO-66 via strong coordination between phosphate and zirconium, π-π stacking and electrostatic adsorption to develop the dual-responsive fluorescence nanoprobe Cu-Mi-UiO-66/aptamer. Due to the photoinduced electron transfer (PET) effect between maleimide groups and the benzene ring of the ligand and the charge transfer between Cy5 and the Zr(IV)/Cu(II) bimetal center of the NMOF, the Cu-Mi-UiO-66/aptamer exhibits a fluorescence turn-off status. The Michael addition reaction between the thiol group of GSH and the maleimide on the NMOF skeleton results in turning on of the blue fluorescence of Cu-Mi-UiO-66. Meanwhile, upon specific interaction with ATP, the aptamer changes into internal loop structures and detaches from Cu-Mi-UiO-66, resulting in turning on of the red fluorescence of Cy5. The nanoprobe demonstrated an excellent sensing performance with a good linear range (GSH, 5.0-450.0 μM; ATP, 1.0-50.0 μM) and a low detection limit (GSH, 2.17 μM; ATP, 0.635 μM). More importantly, the Cu-Mi-UiO-66/aptamer exhibits good performance for tracing intracellular concentration variations of GSH and ATP in living HepG2 cells under different stimulations. This study highlights the potential of NMOFs for multiplexed analysis and provides a valuable tool for tumor microenvironment research and early cancer diagnosis.

Enhancement of the catalytic performance of UIO-66 for the CO2 synthesis of cyclic carbonate using natural nanomaterials as a carrier

One of the environmentally friendly methods is the intelligent utilization of natural one-dimensional nanomaterials as carriers to improve the CO2 catalytic performance of MOF materials. This paper reports an efficient composite catalyst preparation using a cheap and readily available magnesium-aluminosilicate nanometer, attapulgite (ATP), as a carrier for MOF materials. Due to its Lewis acidic site and unique alkaline pore structure, ATP exhibits excellent catalytic activity in the coupling reaction of CO2 with epoxy compounds, and its regular one-dimensional nanorod shape has tremendous potential as a carrier compared to other natural minerals. Given the diversity of MOF material types and structures, the design of this UIO-66/ATP nanocomposite catalyst provides both a new pathway for CO2 capture and conversion and a developmental space for the synthesis of such nanocomposites.

Gelatin aerogel with good mechanical properties and adjustable physical properties for boron adsorption from salt lake brines: An optimized process

A composite aerogel with good mechanical properties and adjustable physical properties was synthesized by a sol-gel technique on the base of gelatin for the boron adsorption from water solution. The adsorption key variables, for instance, initial boron concentration (C0) (900-1100 mg/L), the contact time (t) (8-9 h), and pH (9-11), were optimized using central composite design to obtain improved boron adsorption performance of epichlorohydrin-modified gelatin (EMG)/N-methyl-d-glutamine (NMDG) aerogel loaded with hydroxylated carbon nanotubes (EMG@NMDG). The adsorption followed the pseudo-second-order and Freundlich model. At pH of 10, C0 of 1000 mg/L and t of 10 h, the largest adsorbed amount of EMG@NMDG was 85.79 mg/g. Regeneration experiments were carried out by eluting the adsorbent using HCl. The analysis showed that the adsorption in actual brine was 62.65 mg/g. Therefore, the developed EMG@NMDG aerogel has potential value for the boron extraction from brine and wastewater.

Hydrophilic magnetic Ti3C2Tx-based nanocomposite as an efficient boron adsorbent: Synthesis, characterization, and application

It is widely recognized that wastewater containing boron is an environmental issue. Therefore, the development of adsorbents with excellent adsorption capacity, stability, and recyclability is essential in water treatment applications. A Fe3O4/PDA/Ti3C2Tx/PEI/DHHA nanocomposite has been prepared that can be used to separate and recover boric acid by adjusting the pH of the solution, based on the affinity theory of boric acid and cis-diol. Through series characterization, it was determined that the adsorbent possessed good magnetic properties, high hydrophilicity and high loading capacities. In this study, 4-formylphenylboronic acid (FPBA) was selected as the model compound. The nanocomposite exhibited an adsorption equilibrium time of 10 h and an adsorption capacity of 98.99 mg/g at pH = 8.5 and 25 °C. The Langmuir isothermal model and the quasi-secondary kinetic model are both appropriate for describing the adsorption process. Thermodynamic results suggest that adsorption is a spontaneous chemisorption process. Furthermore, the nanocomposite retains good regeneration performance after five adsorption-desorption cycles.

Solid-phase extraction and separation of indium with P2O4-UiO-66-MOFs (di-2-ethylhexyl phosphoric acid-UiO-66-metal-organic frameworks)

Compared with the traditional liquid-liquid extraction method, solid-phase extraction agents are of great significance for the recovery of indium metal due to their convenience, free of organic solvents, and fully exposed activity. In this study, P₂O₄ (di-2-ethylhexyl phosphoric acid) was chemically modified by using UiO-66 to form the solid-phase extraction agent P₂O₄-UiO-66-MOFs (di-2-ethylhexyl phosphoric acid-UiO-66-metal-organic frameworks) to adsorb In(III). The results show that the Zr of UiO-66 bonds with the P-OH of P₂O₄ to form a composite P₂O₄-UiO-66-MOF, which was confirmed by X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FT-IR). The adsorption process of indium on P₂O₄-UiO-66-MOFs followed pseudo first-order kinetics, and the adsorption isotherms fit the Langmuir adsorption isotherm model. The adsorption capabilities can reach 192.8 mg/g. After five consecutive cycles of adsorption-desorption-regeneration, the indium adsorption capacity by P₂O₄-UiO-66-MOFs remained above 99%. The adsorption mechanism analysis showed that the P=O and P-OH of P₂O₄ molecules coated on the surface of P₂O₄-UiO-66-MOFs participated in the adsorption reaction of indium. In this paper, the extractant P₂O₄ was modified into solid P₂O₄-UiO-66-MOFs for the first time. This work provides a new idea for the development of solid-phase extractants for the recovery of indium.

One-Step Synthesis of Al-Doped UiO-66 Nanoparticle for Enhanced Removal of Organic Dyes from Wastewater

In this study, a series of Al-doped metal-organic frameworks (Al_xZr_(1-x)-UiO-66) were synthesized through a one-step solvothermal method. Various characterization techniques, including X-ray diffraction, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, and N₂ sorption measurement, suggested that the Al doping was uniform and barely influenced the crystallinity, chemical stability, and thermal stability of the materials. Two cationic dyes, safranine T (ST) and methylene blue (MB), were selected for investigating the adsorption performances of Al-doped UiO-66 materials. Al_0.3Zr_0.7-UiO-66 exhibited 9.63 and 5.54 times higher adsorption capacities than UiO-66, 498 mg/g and 251 mg/g for ST and MB, respectively. The improved adsorption performance can be attributed to π-π interaction, hydrogen bond, and the coordination between the dye and Al-doped MOF. The pseudo-second-order and Langmuir models explained the adsorption process well, which indicated that the dye adsorption on Al_0.3Zr_0.7-UiO-66 mostly occurred through chemisorption on homogeneous surfaces. A thermodynamic study indicated the adsorption process was spontaneous and endothermic. The adsorption capacity did not decrease significantly after four cycles.

A comprehensive review on water remediation using UiO-66 MOFs and their derivatives

Metal-organic frameworks (MOFs) are a versatile class of porous materials offering unprecedented scope for chemical and structural tunability. On account of their synthetic versatility, tunable and exceptional host-guest chemistry they are widely utilized in many prominent water remediation techniques. However, some of the MOFs present low structural stabilities specifically in aqueous and harsh chemical conditions which impedes their potential application in the field. Among the currently explored MOFs, UiO-66 exhibits structural robustness and has gained immense scientific popularity. Built with a zirconium-terephthalate framework, the strong Zr-O bond coordination contributes to its stability in aqueous, chemical, and thermal conditions. Moreover, other exceptional features such as high surface area and uniform pore size add to the grand arena of porous nanomaterials. As a result of its stable nature, UiO-66 offers relaxed admittance towards various functionalization, including synthetic and post-synthetic modifications. Consequently, the adsorptive properties of these highly stable frameworks have been modulated by the addition of various functionalities. Moreover, due to the presence of catalytically active sites, the use of UiO-66 has also been extended towards the degradation of pollutants. Furthermore, to solve the practical handling issues of the crystalline powdered forms, UiO-66 has been incorporated into various membrane supports. The incorporation of UiO-66 in various matrices has enhanced the rejection, permeate flux, and anti-fouling properties of membranes. The combination of such exceptional characteristics of UiO-66 MOF has expanded its scope in targeted purification techniques. Subsequently, this review highlights the role of UiO-66 in major water purification techniques such as adsorption, photocatalytic degradation, and membrane separation. This comprehensive review is expected to shed light on the existing developments and guide the inexhaustible futuristic scope of UiO-66 MOF.

Advances in Technologies for Boron Removal from Water: A Comprehensive Review

Boron overabundance in aquatic environment raises severe concerns about the environment and human health because it is toxic to various crops and induces many human and animal diseases with long-term consequences. In response to the boron pollution of water resources and the difficulty of eliminating boron from water for production and living purposes, this article summarizes the progress in research on boron removal technology, addressing the following aspects: (1) the reasons for the difficulty of removing boron from water (boron chemistry); (2) ecological/biological toxicity and established regulations; (3) analysis of different existing processes (membrane processes, resin, adsorption, chemical precipitation, (electric) coagulation, extraction, and combined methods) in terms of their mechanisms, effectiveness, and limitations; (4) prospects for future studies and possible improvements in applicability and recyclability. The focus of this paper is thus to provide a comprehensive summary of reported deboronation processes to date, which will definitely identify directions for the development of boron removal technology in the future.

Adsorptive Membrane for Boron Removal: Challenges and Future Prospects

The complexity of removing boron compounds from aqueous systems has received serious attention among researchers and inventors in the water treating industry. This is due to the higher level of boron in the aquatic ecosystem, which is caused by the geochemical background and anthropogenic factors. The gradual increase in the distribution of boron for years can become extremely toxic to humans, terrestrial organisms and aquatic organisms. Numerous methods of removing boron that have been executed so far can be classified under batch adsorption, membrane-based processes and hybrid techniques. Conventional water treatments such as coagulation, sedimentation and filtration do not significantly remove boron, and special methods would have to be installed in order to remove boron from water resources. The blockage of membrane pores by pollutants in the available membrane technologies not only decreases their performance but can make the membranes prone to fouling. Therefore, the surface-modifying flexibility in adsorptive membranes can serve as an advantage to remove boron from water resources efficiently. These membranes are attractive because of the dual advantage of adsorption/filtration mechanisms. Hence, this review is devoted to discussing the capabilities of an adsorptive membrane in removing boron. This study will mainly highlight the issues of commercially available adsorptive membranes and the drawbacks of adsorbents incorporated in single-layered adsorptive membranes. The idea of layering adsorbents to form a highly adsorptive dual-layered membrane for boron removal will be proposed. The future prospects of boron removal in terms of the progress and utilization of adsorptive membranes along with recommendations for improving the techniques will also be discussed further.

A novel magnetic metal-organic framework absorbent for rapid detection of aflatoxins B1B2G1G2 in rice by HPLC-MS/MS

In this study, a core-shell-structured magnetic metal-organic framework (MMOF) composite material (Fe₃O₄@UiO-66-NH₂) was synthesized by the solvothermal method. It was employed as a new absorbent in combination with high-performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS) for the simultaneous detection of four aflatoxins (AFs) in rice. This method could shorten the pre-processing time by exploiting the advantageous characteristics of magnetic cores. The impurity was removed quickly. The effects of extraction solution, extraction time, adsorbent types, and amount of adsorbent on the extraction rate of target compounds were optimized. Under optimized conditions, AFs were validated and showed a good linear relationship within the 0.375-20 μg kg^-1 concentration range (r² > 0.9992). The limit of detection (LOD) was 0.0188-0.1250 μg kg^-1 and the limit of quantification (LOQ) was 0.0375-0.3750 μg kg^-1. At three spiking levels (0.375, 2, and 10 μg kg^-1), the average recovery values for the four AFs ranged from 85.1% to 111.0%. The relative standard deviation ranged from 3.4% to 7.7%. The new method proved to be simple, fast, efficient, and suitable for the determination of AFs in rice samples.

Recent advances in adsorption and coagulation for boron removal from wastewater: A comprehensive review

The anthropogenic emission of boron to river has become a serious problem that deteriorates the water quality and endangers the ecosystem. Although boron is a micronutrient, it is toxic to plants, animals and humans upon exposure. In this review, we first present the sources of the boron-containing streams and their composition, and then summarize the recent progress of boron removal methods based on adsorption and coagulation systematically. The boron-spiked streams are produced from coal-fired and geothermal power plants, the manufacturing and the activities of oil/gas excavation and mining. The adsorbents for boron removal are classified into the ones functionalized by chelating groups, the ones on the basis of clays or metal oxide. Three subgroups reside in the coagulation approach: electrocoagulation, chemical precipitation and chemical oxo-precipitation. The hybrid technology that combines membrane process and adsorption/coagulation was covered as well. To provide a comprehensive view of each method, we addressed the reaction mechanism, specified the strength and weakness and summarized the progress in the past 5 years. Ultimately, the prospective for future research and the possible improvement on applicability and recyclability were proposed.

Removal of boron from water by GO/ZIF-67 hybrid material adsorption

With the development of the boron industry, boron pollution is getting more and more serious, and excessive boron will harm human health. In this paper, graphene oxide was used as a template to prepare ZIF-67, and GO/ZIF-67 was successfully prepared. GO/ZIF-67 was used for the first time to remove boron from water. SEM, XRD, and other characterization methods were used to confirm the structure. The adsorption kinetics, adsorption isotherm, adsorption thermodynamics, and adsorption mechanism of boron by GO/ZIF-67 were studied in this paper. The adsorption capacity of GO/ZIF-67 for boron is up to 66.65 mg·g^-1 at 25 °C, and adsorption process reaches equilibrium in 400 min. Adsorption kinetics indicates that the adsorption process conforms to the pseudo-first-order kinetic model, and adsorption thermodynamics indicates that the adsorption process is a spontaneous endothermic process controlled by entropy change. The adsorption capacity of boron by GO/ZIF-67 does not decrease significantly after four cycles. The adsorption of boron by GO/ZIF-67 has both chemical and physical adsorption. From Zeta potential and adsorption kinetics, it can be seen that there is physical adsorption during the adsorption process and boron mainly has positive charge on the surface of GO/ZIF-67 and graphene oxide hydroxyl bonding. Based on the adsorption thermodynamics and XPS, it is known that there is chemisorption during the adsorption process, and mainly the combination of boron and cobalt sites.

Evaluation of the Interaction between Borate Ions and Nickel-Aluminum Complex Hydroxide for Purification of Wastewater

A new mixed metal hydroxide adsorbent (NA11, molar ratio_Ni-Al = 1 : 1) was prepared and its physicochemical properties (specific surface area, amount of hydroxyl group, scanning electron microscopy images, X-ray diffraction analysis, elemental distribution, and binding energy) were studied. In addition, the amount of borate ion adsorbed using several adsorbents, including NA11, was evaluated in this study. The specific surface area of and amount of hydroxyl group in NA11 was greater than those of the other studied adsorbents. The amount of borate ion adsorbed showed similar trends to those of the specific surface area and number of hyrdroxyl groups, which indicated that the adsorption mechanism of borate ion was related to the specific surface area and the amount of hydroxyl group. After adsorption, the binding energy of boron B(1s) peaked, and the sulfur peak intensity S(2s) and S(2p) reduced. These results suggest that ion exchange between borate and sulfate ions was one of the adsorption mechanisms. Equilibrium adsorption was reached within 6 h in the case of NA11. These data were fitted into a pseudo-second-order model (r = 0.813-0.998). The solution pH affected the capacity of NA11 for adsorbing borate ion from aqueous solution. It was found that adsorbance was greatest at pH 10. Adsorption isotherm data were fitted to both the Freundlich (r = 0.986-0.994) and Langmuir (r = 0.997-0.999) isotherm equations. Collectively, it is suggested that NA11 is prospectively useful for the adsorption of borate ion from aqueous solutions.

Functionalized Porous Aromatic Frameworks as High-Performance Adsorbents for the Rapid Removal of Boric Acid from Water

This study demonstrates that functionalized, highly porous polymers are promising for the adsorptive capture of boric acid, a neutral contaminant that is difficult to remove from seawater using conventional reverse osmosis membranes. Appending N-methyl-d-glucamine (NMDG) to the pore walls of high-surface-area porous aromatic frameworks (PAFs) yields the adsorbents PAF-1-NMDG and P2-NMDG in a simple two-step synthesis. The boron-selective PAFs demonstrate adsorption capacities that are up to 70% higher than those of a commercial boron-selective resin, Amberlite IRA743, and markedly faster adsorption rates, owing to their higher NMDG loadings and greater porosities relative to the resin. Remarkably, PAF-1-NMDG is able to reduce the boron concentration in synthetic seawater from 2.91 to <0.5 ppm in less than 3 min at an adsorbent loading of only 0.3 mg mL^-1 . The boron adsorption rate constants of both frameworks, determined via a pseudo-second-order rate model, represent the highest values reported in the literature-in most cases orders of magnitude higher than those of other boron-selective adsorbents. The frameworks can also be readily regenerated via mild acid/base treatment and maintain constant boron adsorption capacities for at least 10 regeneration cycles. These results highlight the numerous advantages of PAFs over traditional porous polymers in water treatment applications.

IRMOF-3: A fluorescent nanoscale metal organic frameworks for selective sensing of glucose and Fe (III) ions without any modification

The amine functionalized isoreticular metal-organic framework-3 (IRMOF-3) is synthesized by hydrothermal method. Till now, it's widely used in the area of gas separation, adsorption, and catalysis due to large surface area, structural stability, and tunability. Here, we have reported the use of fluorescent nanoscale IRMOF-3 for highly selective detection of glucose as well as Fe³⁺ ions without any modification. This is due to NH₂ and COOH groups are present on the surface of IRMOF-3 to bind cis-diols of the glucose molecule via host-guest interaction, and Fe³⁺ ions via ligand to metal charge transfer. The Synthesized IRMOF-3 has average diameter of 160 ± 20 nm and interestingly possess deep blue fluorescent emission spectra at 460 nm with quantum yield 17.3%. Using fluorometric assay, the limit of detection (LOD) of glucose and Fe³⁺ ions was found to be 0.56 μM and 4.2 nM respectively. More importantly, the synthesized IRMOF-3 is also utilized for detection of glucose and Fe³⁺ ions in bio-environmental samples.

Significance, evolution and recent advances in adsorption technology, materials and processes for desalination, water softening and salt removal

Desalination and softening of sea, brackish, and ground water are becoming increasingly important solutions to overcome water shortage challenges. Various technologies have been developed for salt removal from water resources including multi-stage flash, multi-effect distillation, ion exchange, reverse osmosis, nanofiltration, electrodialysis, as well as adsorption. Recently, removal of solutes by adsorption onto selective adsorbents has shown promising perspectives. Different types of adsorbents such as zeolites, carbon nanotubes (CNTs), activated carbons, graphenes, magnetic adsorbents, and low-cost adsorbents (natural materials, industrial by-products and wastes, bio-sorbents, and biopolymer) have been synthesized and examined for salt removal from aqueous solutions. It is obvious from literature that the existing adsorbents have good potentials for desalination and water softening. Besides, nano-adsorbents have desirable surface area and adsorption capacity, though are not found at economically viable prices and still have challenges in recovery and reuse. On the other hand, natural and modified adsorbents seem to be efficient alternatives for this application compared to other types of adsorbents due to their availability and low cost. Some novel adsorbents are also emerging. Generally, there are a few issues such as low selectivity and adsorption capacity, process efficiency, complexity in preparation or synthesis, and problems associated to recovery and reuse that require considerable improvements in research and process development. Moreover, large-scale applications of sorbents and their practical utility need to be evaluated for possible commercialization and scale up.

Development of a UiO-Type Thin Film Electrocatalysis Platform with Redox-Active Linkers

Metal-organic frameworks (MOFs) as electrocatalysis scaffolds are appealing due to the large concentration of catalytic units that can be assembled in three dimensions. To harness the full potential of these materials, charge transport to the redox catalysts within the MOF has to be ensured. Herein, we report the first electroactive MOF with the UiO/PIZOF topology (Zr(dcphOH-NDI)), i.e., one of the most widely used MOFs for catalyst incorporation, by using redox-active naphthalene diimide-based linkers (dcphOH-NDI). Hydroxyl groups were included on the dcphOH-NDI linker to facilitate proton transport through the material. Potentiometric titrations of Zr(dcphOH-NDI) show the proton-responsive behavior via the -OH groups on the linkers and the bridging Zr-μ3-OH of the secondary building units with pKa values of 6.10 and 3.45, respectively. When grown directly onto transparent conductive fluorine-doped tin oxide (FTO), 1 μm thin films of Zr(dcphOH-NDI)@FTO could be achieved. Zr(dcphOH-NDI)@FTO displays reversible electrochromic behavior as a result of the sequential one-electron reductions of the redox-active NDI linkers. Importantly, 97% of the NDI sites are electrochemically active at applied potentials. Charge propagation through the thin film proceeds through a linker-to-linker hopping mechanism that is charge-balanced by electrolyte transport, giving rise to cyclic voltammograms of the thin films that show characteristics of a diffusion-controlled process. The equivalent diffusion coefficient, De, that contains contributions from both phenomena was measured directly by UV/vis spectroelectrochemistry. Using KPF6 as electrolyte, De was determined to be De(KPF6) = (5.4 ± 1.1) × 10-11 cm2 s-1, while an increase in countercation size to n-Bu4N+ led to a significant decrease of De by about 1 order of magnitude (De(n-Bu4NPF6) = (4.0 ± 2.5) × 10-12 cm2 s-1).

A mechanistic approach towards the photocatalytic organic transformations over functionalised metal organic frameworks: a review

This review focuses on the possible mechanisms involved in the organic transformations occurring through photocatalysis over functionalised metal–organic frameworks.

Adsorption Behaviors of Organic Micropollutants on Zirconium Metal-Organic Framework UiO-66: Analysis of Surface Interactions

Herein, we studied the adsorption behaviors of organic micropollutants, such as anticonvulsant carbamazepine (CBZ) and antibiotic tetracycline hydrochloride (TC), on zirconium metal-organic framework UiO-66 in water. The maximum adsorption capacities of CBZ and TC on the UiO-66 were 37.2 and 23.1 mg·g^-1 at 25 °C, respectively. The adsorption isotherms and kinetics of CBZ and TC were well described by using the Langmuir model and pseudo-second-order model, respectively, and the adsorptions on UiO-66 are endothermic reactions. The adsorption capacities of CBZ and TC on UiO-66 were decreased with the increase of solution pH. The presence of humic acid could improve the adsorption of CBZ and TC on UiO-66, but K⁺ ion inhibited their adsorption obviously. In addition, Ca²⁺ and Al³⁺ ions also suppressed the adsorption of TC on UiO-66. The competitive adsorption suggested that the adsorption sites for CBZ on UiO-66 were different from those for TC. The surface interactions between UiO-66 and the two micropollutants were demonstrated by powder X-ray diffraction, Fourier transform infrared (FT-IR) spectra, scanning electron microscopy, nitrogen adsorption/desorption isotherms, and X-ray photoelectron (XPS) spectra. The characterizations showed that the adsorption of CBZ on UiO-66 is mainly a physisorption, and the hydrophobic effect played a crucial role during the adsorption of CBZ; meanwhile weak π-π electron donor-acceptor interaction and electrostatic attraction also existed. However, the adsorption of TC on UiO-66 is mainly a chemisorption; in addition to the strong electrostatic attraction and π-π electron donor-acceptor interaction forces, the nitrogenous groups of TC played an important role, which can replace the carboxylic groups coordinated with Zr-O clusters. The obtained results will aid us to comprehend the surface interaction between organic micropollutants and UiO-66 and expand the application of UiO-66 as sorbent for removal of pollutants from water.