Sustainable Water Reclamation from Different Feed Streams by Forward Osmosis Process Using Deep Eutectic Solvents as Reusable Draw Solution

Microwave-assisted extraction with natural deep eutectic solvents for polyphenol recovery from agrifood waste: Mature for scaling-up?

Agrifood industries generate large amounts of waste that may result in remarkable environmental problems, such as soil and water contamination. Therefore, proper waste management and treatment have become an environmental, economic, and social challenge. Most of these wastes are exceptionally rich in bioactive compounds (e.g., polyphenols) with potential applications in the food, cosmetic, and pharmaceutical industries. Indeed, the recovery of polyphenols from agrifood waste is an example of circular bioeconomy, which contributes to the valorization of waste while providing solutions to environmental problems. In this context, unconventional extraction techniques at the industrial scale, such as microwave-assisted extraction (MAE), which has demonstrated its efficacy at the laboratory level for analytical purposes, have been suggested to search for more efficient recovery procedures. On the other hand, natural deep eutectic solvents (NADES) have been proposed as an efficient and green alternative to typical extraction solvents. This review aims to provide comprehensive insights regarding the extraction of phenolic compounds from agrifood waste. Specifically, it focuses on the utilization of MAE in conjunction with NADES. Moreover, this review delves into the possibilities of recycling and reusing NADES for a more sustainable and cost-efficient industrial application. The results obtained with the MAE-NADES approach show its high extraction efficiency while contributing to green practices in the field of natural product extraction. However, further research is necessary to improve our understanding of these extraction strategies, optimize product yields, and reduce overall costs, to facilitate the scaling-up.

Performance evaluation of deep eutectic solvent as a draw solute and vertical up-flow forward osmosis module for desalination of seawater

Forward osmosis (FO) has gained prominence in recent years particularly in desalination due to its ability to operate at low or no hydraulic pressure, with relatively limited membrane fouling and high-water recovery. However, pre-treatment of seawater is required to reduce membrane fouling caused by the presence of suspended solid particles. Also, a significant area of research in forward osmosis is still finding a suitable draw solute (DS) with the ideal characteristics. In this study, a novel deep eutectic solvent (DES) draw solute was used and able to extract water after the 500% dilution of DS. This signifies it as the potential candidate for the ideal DS. A comparative study of plate and frame and vertical up-flow forward osmosis (VUF) FO modules has been evaluated to eliminate the drawbacks associated with FO in terms of membrane fouling and draw solute. In addition, the performance of a novel DES as reline (choline chloride-urea) has been tested in both the modules. In VUF module, significantly less fouling was observed than in the plate and frame module. The initial water flux in plate and frame module was 2.30 LMH with seawater (without pre-treatment) as feed. However, it dropped to 1 LMH after 26 h of run. However, initial water flux in VUF was 1.90 LMH, and it was maintained to 1.50 LMH after 89 h of run. Regeneration of draw solute was carried out using a phase separation method and it was observed that phase separation was only observed for 10% dilution of DES.

Design, synthesis, and application of thermally responsive draw solutes for sustainable forward osmosis desalination: A review

Forward osmosis (FO) is an emerging sustainable desalination technology; however, it is not a stand-alone process and requires an additional step to recover the water or regenerate the draw solute (DS), making it energy extensive. Therefore, incorporating inexpensive energy sources for DS regeneration is a viable solution to compete with reverse osmosis desalination technology. Hence, selecting suitable DS and its regeneration became a crucial research focus in FO desalination. Among various DSs reported, thermally responsive DSs (TRDS) provide an opportunity to integrate low-grade energy sources for DS regeneration. Utilizing such inexpensive energy will reduce fossil fuel energy demand, lower the cost of desalination, and minimize the carbon footprint. Hence, this review explores the TRDS for FO-based desalination with its design, synthesis, and applications. The manuscript has discussed the classification and selection criteria for the DSs, and how traditional and new-generation TRDSs are designed and synthesized from cationic and anionic moieties of ionic liquids, hydrogels, and other chemicals. The manuscript has also given importance to design criteria such as osmotic strength, viscosity, toxicity, and thermal stability for TRDSs. Furthermore, a detailed discussion on the FO performance, energy, and economic aspects of TRDSs has been reviewed, along with a discussion on the possible low-grade energy sources for the recovery of TRDS. Finally, the challenges and future directions for TRDSs have been discussed to drive FO toward sustainable desalination technology.

Eutectics: formation, properties, and applications

Various eutectic systems have been proposed and studied over the past few decades. Most of the studies have focused on three typical types of eutectics: eutectic metals, eutectic salts, and deep eutectic solvents. On the one hand, they are all eutectic systems, and their eutectic principle is the same. On the other hand, they are representative of metals, inorganic salts, and organic substances, respectively. They have applications in almost all fields related to chemistry. Their different but overlapping applications stem from their very different properties. In addition, the proposal of new eutectic systems has greatly boosted the development of cross-field research involving chemistry, materials, engineering, and energy. The goal of this review is to provide a comprehensive overview of these typical eutectics and describe task-specific strategies to address growing demands.

Feasibility of concentrating textile wastewater using a hybrid forward osmosis-membrane distillation (FO-MD) process: Performance and economic evaluation

The forward osmosis-membrane distillation (FO-MD) hybrid process has shown great promise in achieving zero liquid discharge in the textile industry, recovering valuable dye molecules while producing large amounts of clean water. However, the progress of this technology seems to have stagnated with the direct coupling of commercial asymmetric FO and MD membranes, because water management in the system is found to be rather complicated owing to the processing of the different membranes. Herein, we propose, for the first time, an FO-MD hybrid process using a custom-made self-standing and symmetric membrane and a hydrophobic polytetrafluoroethylene membrane in the FO and MD units, respectively. Three types of operation modes were investigated to systematically study the process performance in the concentration treatment of model textile wastewater; two commercial FO membranes were also tested for comparison. Owing to its low fouling propensity and lack of an internal concentration polarization effect, the water transfer rate of our symmetric FO membrane quickly reaches equilibrium with that in the MD unit, resulting in continuous and stable operation. Consequently, the hybrid process using the symmetric FO membrane was found to consume the least energy, as indicated by its lowest total cost in both lab- and large-scale systems. Overall, our study provides a new strategy for using a symmetric FO membrane in the FO-MD hybrid process and highlights its great potential for use in the treatment of textile wastewater.

N-Nitrosamine formation from chloramination of two common ionic liquids

Ionic liquids (ILs) are a class of solvents increasingly used as "green chemicals." Widespread applications of ILs have led to concerns about their accidental entry to the environment. ILs have been assessed for some environmental impacts; however, little has been done to characterize their potential impacts on drinking water if ILs accidentally enter surface water. IL cations are often aromatic or alkyl quaternary amines that resemble structures of previously confirmed N-nitrosamine (NA) precursors. Therefore, this study has evaluated two common ILs, 1-ethyl-3-methylimidazolium bromide (EMImBr) and 1-ethyl-1-methylpyrrolidinium bromide (EMPyrBr), for their NA formation potential. Each IL species was reacted with pre-formed monochloramine under various laboratory conditions. The reaction mixtures were extracted using liquid-liquid extraction and analyzed for NAs using high performance liquid chromatography tandem mass spectrometry. At low concentration of IL (250 μmol/L), the yields of NAs (NMEA or NPyr) increased with increasing doses of monochloramine from both IL species. The total NA yield was as high as 2.5 ± 0.3 ng/mg from EMImBr, and as high as 8.6 ± 0.8 ng/mg from EMPyrBr. At high concentration of IL (5 mmol/L), the NA yield reached a maximum at 2.5 mmol/L NH₂Cl, and then decreased with subsequent increases in the reactant concentrations, demonstrating ILs' solvent effects. This study re-emphasizes the importance of preventing discharge of ILs to water bodies to prevent secondary impacts on drinking water.