Core/Shell Ruthenium–Halloysite Nanocatalysts for Hydrogenation of Phenol

Superhydrophobic Ru Catalyst for Highly Efficient Hydrogenation of Phenol under Mild Aqueous Conditions

Selective hydrogenations of lignin-derived phenolic compounds represent essential processes in the chemical industry, especially for production of a multitude of fine chemicals. However, selective hydrogenation of phenolic compounds in water phase suffers from low conversion. Here we report a catalyst of well-dispersed Ru clusters fixed in N-doped mesoporous hollow carbon spheres (Ru@N-CS) for enhanced cyclohexanol productivity in phenol hydrogenation at mild aqueous condition. This superhydrophobicity carbon spheres appear to selectively allow diffusion of phenol and hydrogen molecules to the electron-rich coordination unsaturated Ru active sites, while confining the reactants there to enhance its reaction probability. The Ru@N-CS catalyst can selectively hydrogenate phenol at 80 °C and 0.5 MPa of H2 in 30 min in aqueous medium with phenol conversions of 100% and ~100% cyclohexanol selectivity, corresponding to cyclohexanol productivity up to 471 per g of Ru per minute. The TOF value is up to 9980 h−1, which 14 times more than Ru nanoparticles supported on N-doped carbon hollow spheres (Ru/N-CS). This work provides an important catalytic system for upgrading of bio-oil into value-added chemicals under mild aqueous-phase.

Architectural design of core-shell nanotube systems based on aluminosilicate clay

A nanoarchitectural approach to the design of functional nanomaterials based on natural aluminosilicate nanotubes and their catalysis, and practical applications are described in this paper. We focused on the buildup of hybrid core-shell systems with metallic or organic molecules encased in aluminosilicate walls, and nanotube templates for structured silica and zeolite preparation. The basis for such an architectural design is a unique Al₂O₃/SiO₂ dual chemistry of 50 nm diameter halloysite tubes. Their structure and site dependent properties are well combined with biocompatibility, environmental safety, and abundant availability, which makes the described functional systems scalable for industrial applications. In these organic/ceramic hetero systems, we outline drug, dye and chemical inhibitor loading inside the clay nanotubes, accomplished with their silane or amphiphile molecule surface modifications. For metal-ceramic tubule composites, we detailed the encapsulation of 2-5 nm Au, Ru, Pt, and Ag particles, Ni and Co oxides, NiMo, and quantum dots of CdZn sulfides into the lumens or their attachment at the outside surface. These metal-clay core-shell nanosystems show high catalytic efficiency with increased mechanical and temperature stabilities. The combination of halloysite nanotubes with mesoporous MCM-41 silica allowed for a synergetic enhancement of catalysis properties. Finally, we outlined the clay nanotubes' self-assembly into organized arrays with orientation and ordering similar to nematic liquid crystals, and these systems are applicable for life-related applications, such as petroleum spill bioremediation, antimicrobial protection, wound healing, and human hair coloring.

Halloysite Nanotubes: Smart Nanomaterials in Catalysis

The use of clay minerals as catalyst is renowned since ancient times. Among the different clays used for catalytic purposes, halloysite nanotubes (HNTs) represent valuable resources for industrial applications. This special tubular clay possesses high stability and biocompatibility, resistance against organic solvents, and most importantly be available in large amounts at a low cost. Therefore, HNTs can be efficiently used as catalysts themselves or supports for metal nanoparticles in several catalytic processes. This review reports a comprehensive overview of the relevant advances in the use of halloysite in catalysis, focusing the attention on the last five years.

Clay nanotube-metal core/shell catalysts for hydroprocesses

Catalytic hydroprocesses play a significant role in oil refining and petrochemistry. The tailored design of new metal nanosystems and optimization of their support, composition, and structure is a prospective strategy for enhancing the efficiency of catalysts. Mesoporous support impacts the active component by binding it to the surface, which leads to the formation of tiny highly dispersed catalytic particles stabilized from aggregation and with minimized leaching. The structural and acidic properties of the support are crucial and determine the size and dispersion of the active metal phase. Currently, research efforts are shifted toward the design of nanoscale porous materials, where homogeneous catalysts are displaced by heterogeneous. Ceramic materials, such as 50 nm diameter natural halloysite nanotubes, are of special interest for this. Much attention to halloysite clay is due to its tubular structure with a hollow 10-15 nm diameter internal cavity, textural characteristics, and different chemical compositions of the outer/inner surfaces, allowing selective nanotube modification. Loading halloysite with metal particles or placing them outside the tubes provides stable and efficient mesocatalysts. The low cost of this abundant nanoclay makes it a good choice for the scaled-up architectural design of core-shell catalysts, containing active metal sites (Au, Ag, Pt, Ru, Co, Mo, Fe₂O₃, CdS, CdZnS, Cu-Ni) located inside or outside the tubular template. These alumosilicate nanotubes are environment-friendly and are available in thousands of tons. Herein, we summarized the advances of halloysite-based composite materials for hydroprocesses, focusing on the selective binding of metal particles. We analyze the tubes' morphology adjustments and size selection, the physicochemical properties of pristine and modified halloysite (e.g., acid-etched or silanized), the methods of metal clusters formation, and their localization. We indicate prospective routes for the architectural design of stable and efficient nanocatalysts based on this safe and natural clay material.

Pickering Emulsions Based on Wax and Halloysite Nanotubes: An Ecofriendly Protocol for the Treatment of Archeological Woods

A novel green protocol for the consolidation and protection of waterlogged archeological woods with wax microparticles has been designed. First, we focused on the development of halloysite nanotubes (HNTs) based Pickering emulsions using wax as the inner phase of the oil-in-water droplets. The optimization of the preparation strategy was supported by both optical microscopy and scanning electron microscopy, which allowed us to show the morphological features of the prepared hybrid systems and their structural properties, i.e., the distribution of the clay at the interface. Also, the dependence of the overall dimensions of the prepared systems on the halloysite content was demonstrated. Microdifferential scanning calorimetry (μ-DSC) was conducted in order to assess whether the thermal properties of the wax are affected after its interaction with HNTs. Then, the Pickering emulsions were employed for the treatment of waterlogged wooden samples. Compared to the archeological woods treated with pure wax, the addition of nanotubes induced a remarkable improvement in the mechanical performance in terms of stiffness and flexural strength. The proposed protocol is environmentally friendly since water is the only solvent used throughout the entire procedure, even if wax is vehiculated into the pores at room temperature. As a consequence, the design of wax/halloysite Pickering emulsions represents a promising strategy for the preservation of wooden artworks, and it has a great potential to be scaled up, thus becoming also exploitable for the treatments of shipwrecks of large size.

Selective Hydrogenation of Acetylene over Pd-Mn/Al2O3 Catalysts

Novel bimetallic Pd-Mn/Al2O3 catalysts are designed by the decomposition of cyclopentadienylmanganese tricarbonyl (cymantrene) on reduced Pd/Al2O3 in an H2 atmosphere. The peculiarities of cymantrene decomposition on palladium and, thus, the formation of bimetallic Pd-Mn catalysts are studied. The catalysts are characterized by N2 adsorption, H2 pulse chemisorption, temperature-programmed desorption of hydrogen (TPD-H2), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), and diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS). The modified catalysts show the changed hydrogen chemisorption properties and the absence of weakly bonded hydrogen. Using an organomanganese precursor provides an uniform Mn distribution on the catalyst surface. Tested in hydrogenation of acetylene, the catalysts show both higher activity and selectivity to ethylene (20% higher) compared to the non-modified Pd/Al2O3 catalyst. The influence of the addition of Mn and temperature treatment on catalyst performance is studied. The optimal Mn content and treatment temperature are found. It is established that modification with Mn changes the route of acetylene hydrogenation from a consecutive scheme for Pd/Al2O3 to parallel one for the Pd-Mn samples. The reaction rate shows zero overall order by reagents for all tested catalysts.

Ruthenium Catalysts Templated on Mesoporous MCM-41 Type Silica and Natural Clay Nanotubes for Hydrogenation of Benzene to Cyclohexane

Mesoporous ruthenium catalysts (0.74–3.06 wt%) based on ordered Mobil Composition of Matter No. 41 (MCM-41) silica arrays on aluminosilicate halloysite nanotubes (HNTs), as well as HNT-based counterparts, were synthesized and tested in benzene hydrogenation. The structure of HNT core-shell silica composite-supported Ru catalysts were investigated by transmission electron microscopy (TEM), X-ray fluorescence (XRF) and temperature-programmed reduction (TPR-H2). The textural characteristics were specified by low-temperature nitrogen adsorption/desorption. The catalytic evaluation of Ru nanoparticles supported on both the pristine HNTs and MCM-41/HNT composite in benzene hydrogenation was carried out in a Parr multiple reactor system with batch stirred reactors (autoclaves) at 80 °C, a hydrogen pressure of 3.0 MPa and a hydrogen/benzene molar ratio of 3.3. Due to its hierarchical structure and high specific surface area, the MCM-41/HNT composite provided the uniform distribution and stabilization of Ru nanoparticles (NPs) resulted in the higher specific activity and stability as compared with the HNT-based counterpart. The highest specific activity (5594 h−1) along with deep benzene hydrogenation to cyclohexane was achieved for the Ru/MCM-41/HNT catalyst with a low metal content.

Formation of ruthenium nanoparticles inside aluminosilicate nanotubes and their catalytic activity in aromatics hydrogenation: the impact of complexing agents and reduction procedure

Ruthenium particles with size from 1 to 7 nm were formed by reduction of ruthenium complexes with urea, ethylenediaminetetraacetic acid, acetone azine, 1,2-Bis(2-furylmethylene)hydrazine) inside halloysite nanotubes. Catalysts of different morphology with Ru content from 0.75 to 0.93 %wt. were obtained using NaBH4 or H2 as reducing agents and tested in benzene hydrogenation as a model reaction. NaBH4 reduced catalysts showed similar catalytic activity with 100 % benzene conversion after 1.5 h. Reduction with H2 resulted in a decrease of catalytic activity for all samples. High benzene conversion was achieved only in the case of 1,2-Bis(2-furylmethylene)hydrazine and ethylenediaminetetraacetic acid. It was concluded that the thermal stability of complexing agents plays a key role in activity of catalysts reduced with H2.

Bio-assisted synthesized Pd nanoparticles supported on ionic liquid decorated magnetic halloysite: an efficient catalyst for degradation of dyes

Using natural materials, i.e. halloysite nanoclay that is a biocompatible naturally occurring clay and Heracleum persicum extract that can serve as a green reducing agent, a novel magnetic catalyst, Fe₃O₄/Hal-Mel-TEA(IL)-Pd, has been designed and fabricated. To prepare the catalyst, halloysite was first magnetized (magnetic particles with mean diameter of 13.06 ± 3.1 nm) and then surface functionalized with melamine, 1,4 dibromobutane and triethanolamine to provide ionic liquid on the halloysite surface (5 wt%). The latter was then used as a support to immobilize Pd nanoparticles that were reduced by Heracleum persicum extract. The characterization of the catalyst established that the loading of Pd in Fe₃O₄/Hal-Mel-TEA(IL)-Pd was very low (0.93 wt%) and its specific surface area was 63 m²g⁻¹. Moreover, the catalyst showed magnetic property (Ms = 19.75 emu g⁻¹) and could be magnetically separated from the reaction. The catalytic performance of the magnetic catalyst for reductive degradation of methyl orange and rhodamine B in the presence of NaBH₄ in aqueous media was investigated. The activation energy, enthalpy, and entropy for the reduction of methyl orange were estimated as 42.02 kJ mol⁻¹, 39.40 kJ mol⁻¹, and −139.06 J mol⁻¹ K⁻¹, respectively. These values for rhodamine B were calculated as 39.97 kJ mol⁻¹, 34.33 kJ mol⁻¹, and −155.18 Jmol⁻¹K⁻¹, respectively. Notably, Fe₃O₄/Hal-Mel-TEA(IL)-Pd could be reused for eight reaction runs with negligible loss of the catalytic activity (~3%) and Pd leaching (0.01 wt% of the initial loading).

Ruthenium-Loaded Halloysite Nanotubes as Mesocatalysts for Fischer-Tropsch Synthesis

Halloysite aluminosilicate nanotubes loaded with ruthenium particles were used as reactors for Fischer–Tropsch synthesis. To load ruthenium inside clay, selective modification of the external surface with ethylenediaminetetraacetic acid, urea, or acetone azine was performed. Reduction of materials in a flow of hydrogen at 400 °C resulted in catalysts loaded with 2 wt.% of 3.5 nm Ru particles, densely packed inside the tubes. Catalysts were characterized by N₂-adsorption, temperature-programmed desorption of ammonia, transmission electron microscopy, X-ray fluorescence, and X-ray diffraction analysis. We concluded that the total acidity and specific morphology of reactors were the major factors influencing activity and selectivity toward CH₄, C_2–4, and C₅₊ hydrocarbons in the Fischer–Tropsch process. Use of ethylenediaminetetraacetic acid for ruthenium binding gave a methanation catalyst with ca. 50% selectivity to methane and C_2–4. Urea-modified halloysite resulted in the Ru-nanoreactors with high selectivity to valuable C₅₊ hydrocarbons containing few olefins and a high number of heavy fractions (α = 0.87). Modification with acetone azine gave the slightly higher CO conversion rate close to 19% and highest selectivity in C₅₊ products. Using a halloysite tube with a 10–20-nm lumen decreased the diffusion limitation and helped to produce high-molecular-weight hydrocarbons. The extremely small C₂–C₄ fraction obtained from the urea- and azine-modified sample was not reachable for non-templated Ru-nanoparticles. Dense packing of Ru nanoparticles increased the contact time of olefins and their reabsorption, producing higher amounts of C₅₊ hydrocarbons. Loading of Ru inside the nanoclay increased the particle stability and prevented their aggregation under reaction conditions.

Preparation of palladated porous nitrogen-doped carbon using halloysite as porogen: disclosing its utility as a hydrogenation catalyst

In this article, halloysite nanoclay (Hal) was used as porogen for the synthesis of nitrogen doped porous carbon material with high specific surface area and pore volume. To this purpose, polymerization of melamine and terephthalaldehyde (MT) was performed in the presence of amine-functionalized carbon coated Hal (Hal@Glu-2N) that was prepared from hydrothermal treatment of Hal and glucose. Then, the prepared nanocomposite was palladated and carbonized to afford Pd@Hal@C. To further improve the textural properties of the nanocomposite, and introduce more pores in its structure, Hal nanotubes were etched. The characterization of the resulting compound, Pd@C, and comparing it with Pd@Hal@C, showed that etching of Hal significantly increased the specific surface area and pore volume in Pd@C. Pd@C was successfully used as a heterogeneous catalyst for promoting hydrogenation of nitroarens in aqueous media using hydrogen with atmospheric pressure as a reducing agent. The comparison of the structural features and catalytic activity of the catalyst with some control catalysts, including, Pd@Hal, Pd@Hal@Glu, Pd@Hal@Glu-MT and Pd@Hal@C confirmed that nitrogen groups in C could improve the Pd anchoring and suppress its leaching, while etching of Hal and introduction of more pores could enhance the catalytic activity through facilitating the mass transfer.

Support morphology-dependent catalytic activity of the Co/CeO2 catalyst for the aqueous-phase hydrogenation of phenol

The less hydrophilic Co/r-CeO₂ catalyst inhibits the adsorption of water and further promotes the adsorption and activation of phenol.

Halloysite nanotubes based heterogeneous solid acid catalysts

Taking into account the excellent catalytic performance of halloysite nanotubes, the main focus of this review article is to unveil the research on halloysite nanotubes for the preparation of solid acids and their applications in acid catalysis.

Swelling suppression of black cotton soil by means of liquid immersion and surface modification

Although the surface organic modification of smectite has been investigated widely, the swelling behavior of clays has been scarcely studied with consideration of civil engineering applications. In this work a facile strategy of liquid-immersion (dilute H₂SO₄ aqeuous solution) was proposed, and the 3-aminopropyltrimethoxysilane (APS) was utilized as surface modifier to suppress expansibility of black cotton soil (BCS) which is a type of highly swelling soils in tropical areas. Factors such as the incorporation dosage of APS, surface characters of soil treated by solution of H₂SO₄ or Na₂CO₃, and reaction temperatures/time were investigated to get lower swelling ratios. The treatment of BCS by H₂SO₄ was found more effective in immobilizing APS molecules, and hydronium ions were suppressed after the APS modification. The free swelling index (FSI) of BCS was decreased from 120% to 15% after treatment with H₂SO₄ and appropriate amount of APS modification. The reaction can be completed within several hours at the room temperature to ~80 °C. The soil samples were characterized by different means including the X-ray diffraction, Fourier-transform infrared spectroscopy, scanning electron microscope, thermogravimetric analysis and Zeta potential measurements. The APS molecules were found to react with –OH groups of the clay, and the hydrophobic groups provide surface hydrophobicity, which prevents hydration of cations within clay minerals. The APS was indicated to re-constructed lamellar structures of smectites after H₂SO₄ treatment, which suppressed the intra-crystalline and the subsequent osmotic swelling. This research highlights the liquid immersion and surface modification is applicable in diminishing swelling ratios of highly expansive black cotton soil.

Manganese and Cobalt Doped Hierarchical Mesoporous Halloysite-Based Catalysts for Selective Oxidation of p-Xylene to Terephthalic Acid

Bimetallic MnCo catalyst, supported on the mesoporous hierarchical MCM-41/halloysite nanotube composite, was synthesized for the first time and proved its efficacy in the selective oxidation of p-xylene to terephthalic acid under conditions of the AMOCO process. Quantitative yields of terephthalic acid were achieved within 3 h at 200–250 °C, 20 atm. of O2 and at a substrate to the Mn + Co ratio of 4–4.5 times higher than for traditional homogeneous system. The influence of temperature, oxygen, pressure and KBr addition on the catalyst activity was investigated, and the mechanism for the oxidation of p-toluic acid to terephthalic acid, excluding undesirable 4-carboxybenzaldehyde, was proposed.

Development of Marine Antifouling Epoxy Coating Enhanced with Clay Nanotubes

An antifouling epoxy resin doped with natural clay nanotubes that are loaded with biocide or silver allowed extended protection against the proliferation of marine microorganisms. Compared to the 2–3 months of protection with antifoulant dichlorooctylisothiazolone (DCOIT) directly admixed into epoxy resin, the DCOIT release time of the halloysite formulations was extended to 12 months by incorporating biocide-loaded nanoclay in the polymer matrix. The protective properties of the epoxy-halloysite nanocomposites showed much less adhesion and proliferation of marine bacteria Vibrio natriegens on the resin surface after a two-month exposure to seawater than the coating formulations directly doped with non-encapsulated DCOIT. The coating formulation protection efficiency was further confirmed by twelve-month shallow field tests in the South China Sea. Replacing 2 wt.% biocide in the traditional formula with DCOIT-loaded natural environmentally friendly halloysite clay drastically improved the antifouling properties of the epoxy coating, promising scalable applications in protective marine coating. The antifouling property of epoxy resin was enhanced with silver particles synthesized on halloysite nanotubes. A natural mixture of MnO particles and halloysite could also be used as a nonbiocide additive to marine coating. The short-term White Sea water test of epoxy coating with 5% of Ag-halloysite composite of MnO-halloysite natural mixture showed no visible fouling.

Palladated Nanocomposite of Halloysite-Nitrogen-Doped Porous Carbon Prepared from a Novel Cyano-/Nitrile-Free Task Specific Ionic Liquid: An Efficient Catalyst for Hydrogenation

A novel nitrile-/cyano-free ionic liquid was synthesized and carbonized under two different carbonization methods in the presence of ZnCl₂ as a catalyst to afford N-doped carbon materials. It was found that the carbonization condition could affect the nature and textural properties of the resulting carbon. In the following, ionic liquid-derived carbon was hybridized with naturally occurring halloysite nanotubes via two procedures, that is, hydrothermal treatment of halloysite and as-prepared carbon and carbonization of ionic liquid in the presence of halloysite. The two novel nanocomposites were then used for stabilizing Pd nanoparticles. Examining the structures and catalytic activities of the resulting catalysts for the hydrogenation of nitroarenes in aqueous media showed that the carbonization procedure and hybridization method could affect the structure and the catalytic activity of the catalysts and hydrothermal approach, in which the structure of halloysite is preserved, leading to the catalyst with superior catalytic activity.

Biocompatible functionalisation of nanoclays for improved environmental remediation

Among the wide range of materials used for remediating environmental contaminants, modified and functionalised nanoclays show particular promise as advanced sorbents, improved dispersants, or biodegradation enhancers. However, many chemically modified nanoclay materials are incompatible with living organisms when they are used in natural systems with detrimental implications for ecosystem recovery. Here we critically review the pros and cons of functionalised nanoclays and provide new perspectives on the synthesis of environmentally friendly varieties. Particular focus is given to finding alternatives to conventional surfactants used in modified nanoclay products, and to exploring strategies in synthesising nanoclay-supported metal and metal oxide nanoparticles. A large number of promising nanoclay-based sorbents are yet to satisfy environmental biocompatibility in situ but opportunities are there to tailor them to produce "biocompatible" or regenerative/reusable materials.

Core-shell design and well-dispersed Pd particles for three-way catalysis: Effect of halloysite nanotubes functionalized with Schiff base

In this study, we have described the synthesis of core@shell three-way catalyst with well-dispersed Pd nanoparticles which were intercalated into halloysite nanotubes (HNTs) material via ligand assistance. The prepared parameters of Pd@HNTs catalyst included amine source, the molar ratio of amine and aldehyde, and the addition of CeO₂ promoter. As a result, Pd@HNTs performed a good dispersion of Pd particles and high stability, which is attributed to the strong interaction between Pd and HNTs with Schiff base ligands and the high thermal resistance of HNTs as a sintering barrier. Moreover, the results of various characteristic analyses revealed that Pd@HNT-E12 (ethylenediamine: salicylaldehyde in a molar ratio of 1:2) exhibited the highest gases conversion to the others, which has excellent redox ability. Furthermore, the addition of CeO₂, which acted as both a promoter and a protector, could provide more oxygen vacancies for promoting NO reduction and CO and C₃H₈ oxidation at gradually elevated temperatures. Such core-shell catalyst Ce@Pd@HNT-E12 could avoid excess CeO₂ penetrating into the pore volume of halloysite support and facilitate the three-way catalytic reaction.

Hydroconversion of Aromatic Hydrocarbons over Bimetallic Catalysts

Bimetallic catalysts (BMC) for hydroconversion of aromatic hydrocarbons (ArH) have been designed by modification of Ni/Al2O3 with chromium(0) compounds and phosphoromolybdic heteropolyacid (HPA). Catalysts were tested in hydrogenation of benzene and toluene, in hydrodemethylation of pure toluene and they were shown to possess a high activity, selectivity and sulfur tolerance under conditions of the processes above. The activity of BMC in these processes was much higher as compared with that of two-component (Ni-Cr, Ni-HPA) or conventional Ni/Al2O3 catalysts. Using BMC, hydrogenation of benzene and toluene proceeds with activity increased (up to 34–38 mol/kg·h) and toluene hydrodemethylation may be performed with improved selectivity (90.3%) and benzene yield (81%). The high sulfur tolerance of BMC was demonstrated by performing hydrodemethylation of toluene containing up to 500 ppm S.

Templated self-assembly of ordered mesoporous silica on clay nanotubes

A novel self-assembly strategy of ordered silica arrays on halloysite clay nanotubes allows us to obtain mesoporous MCM-41 materials with enhanced thermal and mechanical stability. The formation of a structured mesoporous silica phase on halloysite is based on the assembly of cationic amphiphilic molecules onto a negative nanotube surface. The resulting MCM-41/halloysite composite demonstrated thermal and mechanical stability up to 1100 °C and 500 MPa showing great potential for application of mesoporous materials as industrial catalyst carriers and adsorbents.

Halloysite Nanotubes Loaded with Calcium Hydroxide: Alkaline Fillers for the Deacidification of Waterlogged Archeological Woods

A novel green protocol for the deacidifying consolidation of waterlogged archaeological woods through aqueous dispersions of polyethylene glycol (PEG) 1500 and halloysite nanotubes containing calcium hydroxide has been designed. First, we prepared functionalized halloysite nanotubes filled with Ca(OH)₂ in their lumen. The controlled and sustained release of Ca(OH)₂ from the halloysite lumen extended its neutralization action over time, allowing the development of a long-term deacidification of the wood samples. A preliminary thermomechanical characterization of clay/polymer nanocomposites allows us to determine the experimental conditions to maximize the consolidation efficiency of the wood samples. The penetration of the halloysite-Ca(OH)₂/PEG composite within the wooden pores conferred the robustness of the archaeological woods based on the clay/polymer composition of the consolidant mixture. Compared to the archeological woods treated with pure PEG 1500, the addition of modified nanotubes in the consolidant induced a remarkable improvement in the mechanical performance in terms of flexural strength and rigidity. The pH measurements of the treated woods showed that the halloysite-Ca(OH)₂ are effective alkaline fillers. Accordingly, the modified nanotubes provided a long-term protection for lignin present in the woods that are exposed to artificial aging under acidic atmosphere. The attained knowledge shows that an easy and green protocol for the long-term preservation of wooden artworks can be achieved by the combination of PEG polymers and alkaline tubular nanostructures obtained through the confinement of Ca(OH)₂ within the halloysite cavity.

Core-shell nanoarchitecture: Schiff-base assisted synthesis of ruthenium in clay nanotubes

Natural halloysite clay nanotubes were used as a template for clay/Ru core-shell nanostructure synthesis. Ru-nanoparticles were produced via a ligand-assisted metal ion intercalation technique. Schiff bases formed from different organic compounds proved to be effective ligands for the metal interfacial complexation which then was converted to Ru particles. This produces a high amount of intercalated metal nanoparticles in the tube’s interior with more that 90% of the sample loaded with noble metal. Depending on the selection of organic linkers, we filled the tube’s lumen with 2 or 3.5-nm diameter Ru particles, or even larger metal clusters. Produced nanocomposites are very efficient in reactions of hydrogenation of aromatic compounds, as tested for phenol and cresols hydrogenation.

Nanoparticles Formed onto/into Halloysite Clay Tubules: Architectural Synthesis and Applications

Nanoparticles, being objects with high surface area are prone to agglomeration. Immobilization onto solid supports is a promising method to increase their stability and it allows for scalable industrial applications, such as metal nanoparticles adsorbed to mesoporous ceramic carriers. Tubular nanoclay - halloysite - can be an efficient solid support, enabling the fast and practical architectural (inside / outside) synthesis of stable metal nanoparticles. The obtained halloysite-nanoparticle composites can be employed as advanced catalysts, ion-conducting membrane modifiers, inorganic pigments, and optical markers for biomedical studies. Here, we discuss the possibilities to synthesize halloysite decorated with metal, metal chalcogenide, and carbon nanoparticles, and to use these materials in various fields, especially in catalysis and petroleum refinery.