1
|
Roy TR, Dutta-Gupta S, Iyer BVS. Deformation induced evolution of plasmonic responses in polymer grafted nanoparticle thin films. NANOSCALE 2024; 16:11705-11715. [PMID: 38861250 DOI: 10.1039/d4nr00789a] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/12/2024]
Abstract
Multi-functional nanoparticle thin films are being used in various applications ranging from biosensing to photo-voltaics. In this study, we integrate two different numerical approaches to understand the interplay between the mechanical deformation and optical response of polymer grafted plasmonic nanoparticle (PGPN) arrays. Using numerical simulations we examine the deformation of thin films formed by end-functionalised polymer grafted nanoparticles subject to uniaxial elongation. The induced deformation causes the particles in the thin film network to rearrange their positions by two different mechanisms viz. sliding and packing. In sliding, the particles move in the direction of induced deformation. On the other hand, in packing, the particles move in a direction normal to that of the induced deformation. By employing a Green's tensor formulation in polarizable backgrounds for evaluating the optical response of the nanoparticle network, we calculate the evolution of the plasmonic response of the structure as a function of strain. The results indicate that the evolution of plasmonic response closely follows the deformation. In particular, we show that the onset of relative electric field enhancement of the optical response occurs when there is significant rearrangement of the constituent PGPNs in the array. Furthermore, we show that depending on the local packing/sliding and the polarization of the incident light there can be both enhancement and suppression of the SERS response.
Collapse
Affiliation(s)
- Talem Rebeda Roy
- Chemical Engineering, Indian Institute of Technology Hyderabad, Sangareddy 502284, Telangana, India.
| | - Shourya Dutta-Gupta
- Materials Science and Metallurgical Engineering, Indian Institute of Technology Hyderabad, Sangareddy 502284, Telangana, India.
| | - Balaji V S Iyer
- Chemical Engineering, Indian Institute of Technology Hyderabad, Sangareddy 502284, Telangana, India.
| |
Collapse
|
2
|
Li D, Chen Y, Sun L, Zhou J, Dong L, Ren J. The Role of Interchain Force and/or Chain Entanglement in the Melt Strength and Ductility of PLA-Based Materials. Chem Asian J 2023; 18:e202300577. [PMID: 37466153 DOI: 10.1002/asia.202300577] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/02/2023] [Accepted: 07/18/2023] [Indexed: 07/20/2023]
Abstract
As an eco-friendly material, PLA was a desirable alternative to polyethylene and polypropylene films due to its biodegradability. The preferable melt strength of PLA-based materials was a key factor in ensuring its processing using extrusion blow. This paper focuses on the influence of interchain force and/or chain entanglement on the melt strength and ductility of PLA-based materials in recent years. In addition, the preparation of PLA-based materials via physical blending or reactive processing was also summarized. The blending of PLA with a flexible heteropolymer, driven by the interchain force and/or chain entanglements, were characterized as a practicable method for toughening PLA-based materials. Also, the restructuring of PLA chains, by branching based on chain entanglement, was suitable for increasing chain entanglements in PLA matrix, yielding satisfactory melt strength and ductility. This review aims to elucidate the relationship between interchain forces and/or entanglement with the melt strength and ductility of PLA-based materials. An essential and systematic understanding of the tailoring melt strength and rheological properties of PLA by interchain forces and/or entanglement was apt to improve and perfect the processing technology of the extrusion blow, and consequently improve the tensile strength and toughness of PLA films.
Collapse
Affiliation(s)
- Deling Li
- College of Materials and Chemical Engineering, Xuzhou University of Technology, Xuzhou, Jiangsu, 221018, China
| | - Ying Chen
- College of Materials and Chemical Engineering, Xuzhou University of Technology, Xuzhou, Jiangsu, 221018, China
| | - Limei Sun
- College of Materials and Chemical Engineering, Xuzhou University of Technology, Xuzhou, Jiangsu, 221018, China
| | - Jun Zhou
- College of Materials and Chemical Engineering, Xuzhou University of Technology, Xuzhou, Jiangsu, 221018, China
| | - Liming Dong
- College of Materials and Chemical Engineering, Xuzhou University of Technology, Xuzhou, Jiangsu, 221018, China
| | - Jizhen Ren
- College of Materials and Chemical Engineering, Xuzhou University of Technology, Xuzhou, Jiangsu, 221018, China
| |
Collapse
|
3
|
Kumbhakar P, Jayan JS, Sreedevi Madhavikutty A, Sreeram P, Saritha A, Ito T, Tiwary CS. Prospective applications of two-dimensional materials beyond laboratory frontiers: A review. iScience 2023; 26:106671. [PMID: 37168568 PMCID: PMC10165413 DOI: 10.1016/j.isci.2023.106671] [Citation(s) in RCA: 10] [Impact Index Per Article: 10.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 05/13/2023] Open
Abstract
The development of nanotechnology has been advancing for decades and gained acceleration in the 21st century. Two-dimensional (2D) materials are widely available, giving them a wide range of material platforms for technological study and the advancement of atomic-level applications. The design and application of 2D materials are discussed in this review. In order to evaluate the performance of 2D materials, which might lead to greater applications benefiting the electrical and electronics sectors as well as society, the future paradigm of 2D materials needs to be visualized. The development of 2D hybrid materials with better characteristics that will help industry and society at large is anticipated to result from intensive research in 2D materials. This enhanced evaluation might open new opportunities for the synthesis of 2D materials and the creation of devices that are more effective than traditional ones in various sectors of application.
Collapse
Affiliation(s)
- Partha Kumbhakar
- Metallurgical and Materials Engineering, Indian Institute of Technology, Kharagpur, West Bengal 721302 India
- Department of Physics and Electronics, CHRIST (Deemed to Be University), Bangalore 560029, India
| | - Jitha S. Jayan
- Department of Chemistry, National Institute of Technology Calicut, Calicut, Kerala, India
- Department of Chemistry, Amrita Vishwa Vidyapeetham, Amritapuri, Kollam, Kerala, India
| | | | - P.R. Sreeram
- Metallurgical and Materials Engineering, Indian Institute of Technology, Kharagpur, West Bengal 721302 India
| | - Appukuttan Saritha
- Department of Chemistry, Amrita Vishwa Vidyapeetham, Amritapuri, Kollam, Kerala, India
| | - Taichi Ito
- Department of Chemical System Engineering, The University of Tokyo, Tokyo 113-0033, Japan
- Center for Disease Biology and Integrative Medicine, Faculty of Medicine, The University of Tokyo, Tokyo 113-0033, Japan
| | - Chandra Sekhar Tiwary
- Metallurgical and Materials Engineering, Indian Institute of Technology, Kharagpur, West Bengal 721302 India
| |
Collapse
|
4
|
Sreedevi Madhavikutty A, Singh Chandel AK, Tsai CC, Inagaki NF, Ohta S, Ito T. pH responsive cationic guar gum-borate self-healing hydrogels for muco-adhesion. SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS 2023; 24:2175586. [PMID: 36896456 PMCID: PMC9990695 DOI: 10.1080/14686996.2023.2175586] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/16/2022] [Revised: 01/22/2023] [Accepted: 01/29/2023] [Indexed: 06/08/2023]
Abstract
We developed a new muco-adhesive hydrogel composed of cationic guar gum (CGG) and boric acid (BA). The CGG-BA precursor solution of 0.5-2% w/v concentration exhibited fluidity at low pH (3-5), while gelation occurred within 1 min at physiological pH (7-8) conditions. Scanning electron microscopy and Fourier-transform infrared spectroscopy results confirmed the change in physical and chemical behavior, respectively, with change in pH. The pH-responsive self-healing ability was analyzed through microscopy and rheology. CGG-BA hydrogels showed good self-healing property at pH 7.4. The in vitro biocompatibility test of the hydrogel studied using NIH3T3 and NHEK cells showed that it was non-toxic at concentrations of CGG-BA below 2% w/v. Ex vivo mucoadhesive tests confirmed the hydrogel's potential for use as a muco-adhesive. Burst pressure tests were conducted using pig esophageal mucosa and the results showed that at pH 7.4, 1% w/v CGG-BA self-healable hydrogel resisted about 8 ± 2 kPa pressure, comparable to that of Fibrin glue. This was higher than that at solution (pH 5) and brittle gel (pH 10) conditions. To confirm the good adhesive strength of the self-healable hydrogels, lap shear tests conducted, resulted in adhesive strengths measured in the range of 1.0 ± 0.5-2.0 ± 0.6 kPa, which was also comparable to fibrin glue control 1.8 ± 0.6 kPa. Hydrogel weight measurements showed that 40-80% gel lasted under physiological conditions for 10 h. The results suggest that CGG-BA hydrogel has potential as a pH responsive mucosal protectant biomaterial.
Collapse
Affiliation(s)
| | - Arvind K. Singh Chandel
- Center for Disease Biology and Integrative Medicine, The University of Tokyo, Tokyo 113-0033, Japan
| | - Ching-Cheng Tsai
- Department of Bioengineering, The University of Tokyo, Tokyo 113-8656, Japan
| | - Natsuko F. Inagaki
- Center for Disease Biology and Integrative Medicine, The University of Tokyo, Tokyo 113-0033, Japan
| | - Seiichi Ohta
- Department of Chemical System Engineering, The University of Tokyo, Tokyo 113-8656, Japan
- Department of Bioengineering, The University of Tokyo, Tokyo 113-8656, Japan
| | - Taichi Ito
- Department of Chemical System Engineering, The University of Tokyo, Tokyo 113-8656, Japan
- Center for Disease Biology and Integrative Medicine, The University of Tokyo, Tokyo 113-0033, Japan
- Department of Bioengineering, The University of Tokyo, Tokyo 113-8656, Japan
| |
Collapse
|
5
|
Phukan M, Haritha P, Roy TR, Iyer BVS. Mechanical response of networks formed by end-functionalised spherical polymer grafted nanoparticles. SOFT MATTER 2022; 18:8591-8604. [PMID: 36325950 DOI: 10.1039/d2sm01174c] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/16/2023]
Abstract
Via computer simulations we examine the mechanical response of hybrid polymer-particle networks composed of rigid spherical nanoparticles with long flexible polymer chains grafted onto their surface. The canopy of grafted polymer arms are end-functionalised such that interacting polymer-grafted nanoparticles (PGNs) form labile bonds when their coronas overlap. In the present study, the number of grafted arms, f, are such that the PGN brushes are in the small (f = 600) and intermediate curvature (f = 900 and 1200) regime with stable bonded interactions. To investigate the mechanical response of networks formed by these PGNs, controlled uniaxial elongation at a specified pulling rate is imposed on a 2-D network of PGNs placed on a hexagonal lattice. In the simulations, the force required to deform the network is measured as a function of the elongation and pulling rate imposed on the network until the network fails. By analysis of the force-strain curves and the rearrangement of the PGNs in the network we show that an increase in the number of grafted arms, pulling velocity and energy of the bonded interactions alters both the toughness and the mode of failure of the networks. In particular, we show that an increase in the number of grafted arms results in a reduction of toughness. Furthermore, analysis of the simulations of force relaxation after rapid extension indicates that the relaxation in deformed networks can be characterised by one or two time scales that depend on the number of grafted arms. The analysis of force-strain curves and force relaxation demonstrate the role of Deborah number, De, and the limitations in the use of a unique De in understanding the mechanical response of the networks respectively.
Collapse
Affiliation(s)
- Monmee Phukan
- Department of Chemical Engineering, IIT Hyderabad, Hyderabad, India.
| | - Pindi Haritha
- Department of Chemical Engineering, IIT Hyderabad, Hyderabad, India.
| | - Talem Rebeda Roy
- Department of Chemical Engineering, IIT Hyderabad, Hyderabad, India.
| | - Balaji V S Iyer
- Department of Chemical Engineering, IIT Hyderabad, Hyderabad, India.
| |
Collapse
|
6
|
Zhang Y, Tang H, Wang R. Controlling the two components modified on nanoparticles to construct nanomaterials. SOFT MATTER 2022; 18:8213-8222. [PMID: 36285648 DOI: 10.1039/d2sm00877g] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/16/2023]
Abstract
Nanoparticle self-assembly technology has made great progress in the past 30 years. Many kinds of self-assembly strategies of modifiable nanoparticles have been developed and used to construct nano-aggregates by designing the shape, size and type of nanoparticles and controlling the components modified on nanoparticles. These strategies are widely used in many fields, such as medical diagnosis, biological detection, drug delivery, materials synthesis and sensors. The modified components can be DNA chains, polymer chains, proteins, and even organic molecules based on different molecular conformations and chemical properties. In recent years, the self-assembly of two-component modified nanoparticles has gradually attracted more attention. Nanoparticles modified with two components of different DNA strands can self-assemble to produce a variety of nano arrangement structures, such as BCC, FCC and other cubic crystals, which can be used in crystal materials. Two-component modification of hydrophilic and hydrophobic polymers can produce vesicular aggregates, which can be used for drug delivery. In this review, we summarize the latest experimental progress and theoretical simulation of self-assembly of two-component modified nanoparticles including different DNA chains, different polymer chains, DNA and polymer chains, proteins and polymer chains, and different organic molecules. Their self-assembly characteristics and application prospects were discussed. Compared with single-component modified nanoparticles, two-component nanoparticles have different tethered molecules or molecular chains, which can be multifunctional by regulating different modified components and types of nanoparticles and ultimately expand the scope of applications.
Collapse
Affiliation(s)
- Yixin Zhang
- Department of Polymer Science and Engineering, State Key Laboratory of Coordination Chemistry, Key Laboratory of High Performance Polymer Materials and Technology of Ministry of Education, School of Chemistry and Chemical Engineering, Nanjing University, Nanjing, 210023, China.
| | - Hao Tang
- Department of Polymer Science and Engineering, State Key Laboratory of Coordination Chemistry, Key Laboratory of High Performance Polymer Materials and Technology of Ministry of Education, School of Chemistry and Chemical Engineering, Nanjing University, Nanjing, 210023, China.
| | - Rong Wang
- Department of Polymer Science and Engineering, State Key Laboratory of Coordination Chemistry, Key Laboratory of High Performance Polymer Materials and Technology of Ministry of Education, School of Chemistry and Chemical Engineering, Nanjing University, Nanjing, 210023, China.
| |
Collapse
|
7
|
Iyer BVS. Effect of functional anisotropy on the local dynamics of polymer grafted nanoparticles. SOFT MATTER 2022; 18:6209-6221. [PMID: 35894123 DOI: 10.1039/d2sm00710j] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/15/2023]
Abstract
End-functionalised polymer grafted nanoparticles (PGNs) form bonds when their coronas overlap. The bonded interactions between the overlapping PGNs depend on the energy of the bonds (U). In the present study, oscillatory deformation imposed on a simple system with interacting PGNs placed on the vertices of a triangle is employed to examine the local dynamics as a function of energy of the bonds and the frequency of oscillation relative to the characteristic rupture frequency, ω0 = 2πν exp(-U/kBT), of the bonds. In particular, the effect of functional anisotropy is studied by introducing bonds of two different energies between adjacent PGNs. A multicomponent model developed by Kadre and Iyer, Macromol. Theory Simul., 2021, 30, 2100005, that combines the features of effective interactions between PGNs, self-consistent field theory and master equation approach to study bond kinetics is employed to obtain the local dynamics. The resulting force-strain curves are found to exhibit a simple broken symmetry where Fx (γ,) ≠ -Fx (-γ,-) and Fy (γ,) ≠ Fy (-γ,-) in systems with functional anisotropy. Fourier analysis of the dynamic response reveals that functional anisotropy leads to finite even harmonic terms and systematic variation of both the elastic and dissipative response from that of the isotropic systems. Furthermore, the intra-cycle variations in the strain stiffening and shear thickening ratios obtained from the analysis indicate that functional anisotropy leads to anisotropic nonlinear response.
Collapse
Affiliation(s)
- Balaji V S Iyer
- Department of Chemical Engineering, IIT Hyderabad, Hyderabad, India.
| |
Collapse
|