Immobilization of Alcohol Dehydrogenase on Titania Nanoparticles To Enhance Enzyme Stability and Remove Substrate Inhibition in the Reaction of Formaldehyde to Methanol

Change in the Kinetic Regime of Aggregation of Yeast Alcohol Dehydrogenase in the Presence of 2-Hydroxypropyl-β-cyclodextrin

Chemical chaperones are low-molecular-weight compounds that suppress protein aggregation. They can influence different stages of the aggregation process-the stage of protein denaturation, the nucleation stage and the stage of aggregate growth-and this may lead to a change in the aggregation kinetic regime. Here, the possibility of changing the kinetic regime in the presence of a chemical chaperone 2-hydroxypropyl-β-cyclodextrin (2-HP-β-CD) was investigated for a test system based on the thermally induced aggregation of yeast alcohol dehydrogenase (yADH) at 56 °C. According to differential scanning calorimetry data, 2-HP-β-CD did not affect the stage of the protein molecule unfolding. Dynamic light scattering data indicated changes in the aggregation kinetics of yADH during the nucleation and aggregate growth stages in the presence of the chaperone. The analysis of kinetic curves showed that the order of aggregation with respect to protein (nc), calculated for the stage of aggregate growth, changed from nc = 1 to nc = 2 with the addition of 100 mM 2-HP-β-CD. The mechanism of 2-HP-β-CD action on the yADH thermal aggregation leading to a change in its kinetic regime of aggregation is discussed.

Spontaneous Bilateral Basal Ganglia Haemorrhage Secondary to Methanol Poisoning

Methanol toxicity remains as major problem in the medical field.[1],[2],[3] With its active metabolite, formic acid often leads to severe metabolic acidosis and to some extend brain damaged.[4],[5],[6] We are reporting a case of brain hemorrhage at the right external capsule and left basal ganglia with mass effect and obstructive hydrocephalus in a methanol poisoning patient. A confused 29-year-old gentleman was brought into hospital. Initial investigation showed severe metabolic acidosis with raised anion gap. Initial brain CT scan was normal. Subsequently, serum methanol was reported to be high (112 mg/dL). Intravenous (IV) ethanol 10% was given without any delayed. As there was no improvement in his consciousness level, a repeat brain CT was performed and it showed multiple cerebral hemorrhage with obstructive hydrocephalus. Hence, clinicians should have high index of suspicion for cerebral hemorrhage in a patient with methanol toxicity, who presented with altered mental status and severe metabolic acidosis.

Prevention of Swelling Phenomenon of Alginate Beads To Improve the Stability and Recyclability of Encapsulated Horse Liver Alcohol Dehydrogenase

Horse Liver Alcohol Dehydrogenase (HLADH) has been immobilized on calcium-alginate beads and used for both oxidation and reduction reactions. To avoid swelling of the beads and their subsequent breakage, calcium ions were added to both reaction and storage solutions, allowing the beads to maintain the initial structural features. The techniques used for this purpose revealed that 2 mM Ca2+ is the optimal concentration, which does not significantly change the weight of the beads, the amount of water in them, and their external and internal structure. The optimized experimental procedure has been used to verify the properties of the enzyme in terms of reusability, storage, and thermal stability. The addition of calcium ions allows the enzyme to retain more than 80 % of its initial activity for fourteen cycles and approximately 50 % at the twentieth cycle. Moreover, when the biocatalyst has been stored in a buffer solution containing 2 mM Ca2+ , the retention of enzyme activity after 30 days was 100 %, compared to that measured before incubation. The encapsulated enzyme exhibits greater thermal stability than free HLADH up to at least 60 °C, preventing dimer dissociation into the two subunits.

Fungal Alcohol Dehydrogenases: Physiological Function, Molecular Properties, Regulation of Their Production, and Biotechnological Potential

Fungal alcohol dehydrogenases (ADHs) participate in growth under aerobic or anaerobic conditions, morphogenetic processes, and pathogenesis of diverse fungal genera. These processes are associated with metabolic operation routes related to alcohol, aldehyde, and acid production. The number of ADH enzymes, their metabolic roles, and their functions vary within fungal species. The most studied ADHs are associated with ethanol metabolism, either as fermentative enzymes involved in the production of this alcohol or as oxidative enzymes necessary for the use of ethanol as a carbon source; other enzymes participate in survival under microaerobic conditions. The fast generation of data using genome sequencing provides an excellent opportunity to determine a correlation between the number of ADHs and fungal lifestyle. Therefore, this review aims to summarize the latest knowledge about the importance of ADH enzymes in the physiology and metabolism of fungal cells, as well as their structure, regulation, evolutionary relationships, and biotechnological potential.

Exploring the synergistic effects of enzyme@lactoferrin hybrid on biomimetic immobilization: Unveiling the impact on catalytic efficiency

Metal-organic frameworks (MOFs) have gained attention as a hopeful material for enzyme immobilization due to their advantageous characteristics, for instance, high surface area and easy construction conditions. Nonetheless, the confinement effect and competing coordination often lead to partial or complete inactivation of the immobilized enzymes. In this study, we present a novel strategy, the lactoferrin-boosted one-pot embedding approach, which efficiently connects enzymes with lactoferrin (LF) hybrid Graphene Oxide (GO)//Pt Nanoparticles/MOF-74 (referred to as enzyme@LF@rGO/PtNP@MOF-74). This approach demonstrates a high embedding efficiency. By employing a hybrid of LF and GO/Pt Nanoparticles as synchronous ligands for Zn-MOF-74, we provide a suitable environment for enzyme immobilization, resulting in enhanced enzymatic activity. The lipase@LF@rGO/PtNP@MOF-74 exhibits improved stability and resistance to organic solvents and significantly enhanced in thermal stability of the lipase@LF@rGO/PtNP@MOF-74 comparing to the free enzyme. The lipase@LF@rGO/PtNP@MOF-74 displayed excellent long-term storage stability, which could protect more than 80 % of the initial activity for 8 weeks. Besides, the lipase@LF@rGO/PtNP@MOF-74 had high reusability, which showed a high degree of activity (more than 75 %) after 20 cycles. As a bio-macromolecule, lactoferrin possesses bio-affinity, creating a favorable microenvironment for enzymes and minimizing the impact of external factors on their conformation and activity during bio-macromolecule utilization.

Preparation of Alcohol Dehydrogenase-Zinc Phosphate Hybrid Nanoflowers through Biomimetic Mineralization and Its Application in the Inhibitor Screening

A biomimetic mineralization method was used in the facile and rapid preparation of nanoflowers for immobilizing alcohol dehydrogenase (ADH). The method mainly uses ADH as an organic component and zinc phosphate as an inorganic component to prepare flower-like ADH/Zn₃(PO₄)₂ organic-inorganic hybrid nanoflowers (HNFs) with the high specific surface area through a self-assembly process. The synthesis conditions of the ADH HNFs were optimized and its morphology was characterized. Under the optimum enzymatic reaction conditions, the Michaelis-Menten constant (K_m) of ADH HNFs (β-NAD⁺ as substrate) was measured to be 3.54 mM, and the half-maximal inhibitory concentration (IC₅₀) of the positive control ranitidine (0.2-0.8 mM) was determined to be 0.49 mM. Subsequently, the inhibitory activity of natural medicine Penthorum chinense Pursh and nine small-molecule compounds on ADH was evaluated using ADH HNFs. The inhibition percentage of the aqueous extract of P. chinense is 57.9%. The vanillic acid, protocatechuic acid, gallic acid, and naringenin have obvious inhibitory effects on ADH, and their percentages of inhibition are 55.1%, 68.3%, 61.9%, and 75.5%, respectively. Moreover, molecular docking analysis was applied to explore the binding modes and sites of the four most active small-molecule compounds to ADH. The results of this study can broaden the application of immobilized enzymes through biomimetic mineralization, and provide a reference for the discovery of ADH inhibitors from natural products.

Stairway to Stereoisomers: Engineering Short- and Medium-Chain Ketoreductases To Produce Chiral Alcohols

The short- and medium-chain dehydrogenase/reductase superfamilies are responsible for most chiral alcohol production in laboratories and industries. In nature, they participate in diverse roles such as detoxification, housekeeping, secondary metabolite production, and catalysis of several chemicals with commercial and environmental significance. As a result, they are used in industries to create biopolymers, active pharmaceutical intermediates (APIs), and are also used as components of modular enzymes like polyketide synthases for fabricating bioactive molecules. Consequently, random, semi-rational and rational engineering have helped transform these enzymes into product-oriented efficient catalysts. The rise of newer synthetic chemicals and their enantiopure counterparts has proved challenging, and engineering them has been the subject of numerous studies. However, they are frequently limited to the synthesis of a single chiral alcohol. The study attempts to defragment and describe hotspots of engineering short- and medium-chain dehydrogenases/reductases for the production of chiral synthons.

Immobilization of enzymes for bioremediation: A future remedial and mitigating strategy

Over the years, extensive urbanization and industrialization have led to xenobiotics contamination of the environment and also posed a severe threat to human health. Although there are multiple physical and chemical techniques for xenobiotic pollutants management, bioremediation seems to be a promising technology from the environmental perspective. It is an eco-friendly and low-cost method involving the application of microbes, plants, or their enzymes to degrade xenobiotics into less toxic or non-toxic forms. Moreover, bioremediation involving enzymes has gained an advantage over microorganisms or phytoremediation due to better activity for pollutant degradation with less waste generation. However, the significant disadvantages associated with the application of enzymes are low stability (storage, pH, and temperature) as well as the low possibility of reuse as it is hard to separate from reaction media. The immobilization of enzymes without affecting their activity provides a possible solution to the problems and allows reusability by easing the process of separation with improved stability to various environmental factors. The present communication provides an overview of the importance of enzyme immobilization in bioremediation, carrier selection, and immobilization methods, as well as the pros and cons of immobilization and its prospects.

Zinc sulfide-chitosan hybrid nanoparticles as a robust surface for immobilization of Sillago sihama α-amylase

In the present study, zinc sulfide-chitosan hybrid nanoparticles synthesized by chemical deposition were used as a matrix for the immobilization of purified α-amylase extracted from Sillago sihama (Forsskal, 1775). In this regard, the size and morphological structure of zinc sulfide-chitosan hybrid nanoparticles before and after the stabilization process were evaluated using FT-IR, DLS methods, as well as SEM and TEM electron microscopy, and EDS analyses. Then, the efficiency of the immobilized enzyme was measured in terms of temperature, optimal pH, stability at the critical temperature, and pH values. Immobilization of α-amylase on zinc sulfide -chitosan hybrid nanoparticles increased the long-term stability, as well as its endurance to critical temperatures and pH values; however, the optimal temperature and pH values of the enzyme were not altered following the immobilization process. The kinetic parameters of the enzyme were also changed during immobilization. Enzyme immobilization increased the K_m, whereas decreased the catalytic efficiency (K_cat / K_m) of the immobilized enzyme compared with the free enzyme. These results are very important as, in most cases, enzyme immobilization reduces the activity and catalytic efficiency of enzymes. The nano-enzyme produced in this study, due to its high temperature, and pH stability, could be a good candidate for industrial applications, especially in the food industry.

Improving the Enzymatic Cascade of Reactions for the Reduction of CO2 to CH3OH in Water: From Enzymes Immobilization Strategies to Cofactor Regeneration and Cofactor Suppression

The need to decrease the concentration of CO2 in the atmosphere has led to the search for strategies to reuse such molecule as a building block for chemicals and materials or a source of carbon for fuels. The enzymatic cascade of reactions that produce the reduction of CO2 to methanol seems to be a very attractive way of reusing CO2; however, it is still far away from a potential industrial application. In this review, a summary was made of all the advances that have been made in research on such a process, particularly on two salient points: enzyme immobilization and cofactor regeneration. A brief overview of the process is initially given, with a focus on the enzymes and the cofactor, followed by a discussion of all the advances that have been made in research, on the two salient points reported above. In particular, the enzymatic regeneration of NADH is compared to the chemical, electrochemical, and photochemical conversion of NAD+ into NADH. The enzymatic regeneration, while being the most used, has several drawbacks in the cost and life of enzymes that suggest attempting alternative solutions. The reduction in the amount of NADH used (by converting CO2 electrochemically into formate) or even the substitution of NADH with less expensive mimetic molecules is discussed in the text. Such an approach is part of the attempt made to take stock of the situation and identify the points on which work still needs to be conducted to reach an exploitation level of the entire process.

A review on the immobilization of pepsin: A Lys-poor enzyme that is unstable at alkaline pH values

Pepsin is a protease used in many different applications, and in many instances, it is utilized in an immobilized form to prevent contamination of the reaction product. This enzyme has two peculiarities that make its immobilization complex. The first one is related to the poor presence of primary amino groups on its surface (just one Lys and the terminal amino group). The second one is its poor stability at alkaline pH values. Both features make the immobilization of this enzyme to be considered a complicated goal, as most of the immobilization protocols utilize primary amino groups for immobilization. This review presents some of the attempts to get immobilized pepsin biocatalyst and their applications. The high density of anionic groups (Asp and Glu) make the anion exchange of the enzyme simpler, but this makes many of the strategies utilized to immobilize the enzyme (e.g., amino-glutaraldehyde supports) more related to a mixed ion exchange/hydrophobic adsorption than to real covalent immobilization. Finally, we propose some possibilities that can permit not only the covalent immobilization of this enzyme, but also their stabilization via multipoint covalent attachment.

Magnetic layered double hydroxide nanosheet as a biomolecular vessel for enzyme immobilization

Magnetic nanoparticle coated with manganese‑aluminum layered double hydroxide (Fe3O4/Mg-Al-CO3-LDH) was prepared and used as porous support for ficin (EC 3.4.22.3) as a model enzyme. Structural characteristics were studied by XRD, FTIR, SEM and light scattering. The quantity of immobilized ficin on the mentioned LDH and non-magnetic LDH was measured and enzyme activity, stability and reusability were compared. Results revealed that the core and shell structure of Fe₃O₄/Mg-Al-CO₃-LDH makes it better dispersion compared to the pristine Mg-Al-CO₃-LDH. Ficin showed strong affinity to absorption of the surface of mentioned LDHs nanosheet especially magnetic LDH, confirmed that the existence of Fe₃O₄ in the core structure of magnetic Fe₃O₄/Mg-Al-CO₃-LDH caused better dispersion of LDH nanocrystal shell compared to pristine LDH moreover, enzyme which immobilized on the magnetic LDH supports, can be recovered by magnetic interaction. The storage stability of free ficin, immobilized ficin on the Mg-Al-CO₃-LDH and Fe₃O₄/Mg-Al-CO₃-LDH during a period of 120 days lost about 75%, 30%, and 20% of their initial activities, respectively.

A direct electron transfer formaldehyde dehydrogenase biosensor for the determination of formaldehyde in river water

In this work, we report the construction of a direct electron transfer (DET) biosensor based on NAD-dependent formaldehyde dehydrogenase from Pseudomonas sp. (FDH) immobilized on the gold nanoparticle-modified gold electrode. To the best of our knowledge, a DET for FDH was achieved for the first time - the oxidation of formaldehyde started at a low electrode potential of -190 mV vs. Ag/AgCl and reached a maximum current density of 1100 nA cm^-2 at 200 mV vs. Ag/AgCl. Also, the designed electrode was insensitive to substrate inhibition (in comparison to the free enzyme) and operated in solutions with formaldehyde concentrations up to 10 mM. The electrode was used and characterized as a mediatorless biosensor for the detection of formaldehyde. The biosensor demonstrated a limit of detection (0.05 mM), linear range from 0.25 to 2.0 mM, the sensitivity of 178.9 nA mM cm^-2, high stability and selectivity. The biosensor has been successfully tested for the determination of added formaldehyde concentration in river water samples, thus the developed electrode could be applied for a fast, inexpensive and simple measurement of formaldehyde in various media.

High performance biocatalyst based on β-d-galactosidase immobilized on mesoporous silica/titania/chitosan material

A new support for the immobilization of β-d-galactosidase from Kluyveromyces lactis was developed, consisting of mesoporous silica/titania with a chitosan coating. This support presents a high available surface area and adequate pore size for optimizing the immobilization efficiency of the enzyme and, furthermore, maintaining its activity. The obtained supported biocatalyst was applied in enzyme hydrolytic activity tests with o-NPG, showing high activity 1223 Ug^-1, excellent efficiency (74%), and activity recovery (54%). Tests of lactose hydrolysis in a continuous flow reactor showed that during 14 days operation, the biocatalyst maintained full enzymatic activity. In a batch system, after 15 cycles, it retained approximately 90% of its initial catalytic activity and attained full conversion of the lactose 100% (±12%). Additionally, with the use of the mesoporous silica/titania support, the biocatalyst presented no deformation and fragmentation, in both systems, demonstrating high operational stability and appropriate properties for applications in food manufacturing.

Enhancing the sustainability of KsdD as a biocatalyst for steroid transformation by immobilization on epoxy support

The Δ1-dehydrogenation of 3-ketosteroid substrates is a crucial reaction in the production of steroids. Although 3-ketosteroid Δ1-dehydrogenase (KsdD) catalyzes this reaction with high efficiency and selectivity, the low stability and high cost of the purified enzyme catalyst have limited its industrial application. In this study, an epoxy support was used to evaluate the covalent immobilization of KsdD from Pimelobacter simplex, and the best androsta-1,4-diene-317-dione (ADD) production was achieved after optimized immobilization of KsdD enzyme in 1.5 M NaH₂PO₄- Na₂HPO₄ buffer (pH 6.5) for 12 h at 25 °C. The immobilized KsdD exhibited higher tolerance toward 20 % methanol. The dehydrogenation reaction reached a conversion efficiency of up to 90.0 % in 2 h when using 0.6 mg/mL of 4-androstene-317-dione (AD). The W299A and W299 G mutants of KsdD were also immobilized, and both showed the better catalytic performance with higher k_cat/K_M values compared with the wild type (WT). The immobilized W299A, W299 G and WT KsdD respectively maintained 70.5, 65.7 and 38.7 % of their initial activity at the end of 15 reaction cycles. Furthermore, the W299A retained 66.3 % of the initial activity after 30 days of incubation at 4 °C, and was more stable than free KsdD, Thus, the immobilized W299A is a promising biocatalyst for steroid dehydrogenation. In this study, we investigated the application of immobilized enzymes for the dehydrogenation of steroids, which will be of great importance for improving the development of green technology and sustainable use of biocatalysts in the steroid manufacturing industry.

Hierarchical porous and hydrophilic metal-organic frameworks with enhanced enzyme activity

Metal-organic frameworks (MOFs) for enzyme encapsulation-induced biomimetic mineralization under mild reaction conditions are commonly microporous and hydrophobic, which result in a rather high mass transfer resistance of the reactants and restrain the enzyme catalytic activity. Herein, we prepared a type of hierarchical porous and hydrophilic MOF through the biomimetic mineralization of enzymes, zinc ions, 2-methylimidazole, and lithocholic acid. The hierarchical porous structure accelerated the diffusion process of the reactants and the increased hydrophilicity conferred interfacial activity and increased the enzyme catalytic activity. The immobilized enzyme retained higher catalytic activity than the free enzyme and exhibited enhanced resistance to alkaline, organic, and high-temperature conditions. The nanobiocatalyst was reusable and showed long-term storage stability.