Feasibility of Varied Polyethylene Terephthalate Wastes as a Linker Source in Metal–Organic Framework UiO-66(Zr) Synthesis

When microplastics/plastics meet metal-organic frameworks: turning threats into opportunities

Significant efforts have been devoted to removal and recycling of microplastics (MPs; <5 mm) to address the environmental crises caused by their ubiquitous presence and improper treatment. Metal-organic frameworks (MOFs) demonstrate compatibility with MPs/plastics through adsorption, degradation, or assembly with the MPs/plastic polymers. Above 90% of MPs/plastic particles can be adsorbed on MOF materials via the hydrophobic interaction, electrical attraction, π-π stacking, and van der Waals forces. Meanwhile, certain MOFs have successfully converted various types of plastics into high-valued small molecules through thermocatalysis and photocatalysis. In thermocatalysis, the primary process should be C-O bond cleavage, whereas in photocatalysis it ought to be the generation of reactive oxygen species (ROS). Moreover, the construction of novel MOFs using waste MPs/plastics as the ligands was mostly accomplished through three dominant ways, including glycolysis, hydrolysis and methanolysis. Once successfully composited, the MOF@plastic materials illustrated tremendous promise for interdisciplinary research in multifunctional applications, including sewage treatment, gas adsorption/separation, and the preparation of microbial fuel cells, plastic scintillators and other sensors. The review explicated the relationships between MPs/plastics and MOF materials, as well as the challenges and perspectives for their development. It can provide a deeper understanding of how MOFs remove/degrade MP/plastic particles, how MPs/plastics are recycled to prepare MOFs, and how to build multifunctional MOF@plastic composites. Overall, this analysis is anticipated to outline future prospects for turning the threats (MPs/plastics contamination) into opportunities (e.g., as ligands to prepare MOF or MOF@plastic materials for further applications).

Efficient photocatalytic degradation of microplastics by constructing a novel Z-scheme Fe-doped BiO2-x/BiOI heterojunction with full-spectrum response: Mechanistic insights and theory calculations

Recently, microplastics (MPs) have garnered significant attention as a challenging emerging pollutant to address. Here, a full-spectrum light-driven Fe-doping BiO2-x/BiOI (FBI) Z-scheme heterojunction was constructed for efficiently degrading MPs in waters. Compared with BiO2-x, Fe doping BiO2-x, and BiOI, the optimal photocatalyst (40-FBI) can cause deep cracks in the polyethylene terephthalate (PET) within 10 h under the irradiation of full-spectrum light. Meanwhile, FT-IR characterization revealed that the absorption peak intensities of the C-O group, CO group, -CH stretching vibration, and -OH group on the MPs surface gradually increased with degradation time. A series of experiments and theory calculations revealed that the introduction of Fe creates impurity levels, accelerating the separation of photo-generated carriers and reducing the work function of BiO2-x, thereby enhancing the transport of photo-generated carriers between Z-scheme heterojunctions. This study offers a valuable idea for designing an efficient photocatalyst by simultaneously introducing ion doping and constructing heterojunctions for enhancing MPs degradation.

Eco-Friendly Sustainable and Responsive High-Performance Benzotriazole-Metal Organic Frameworks/Silica Composite Coating with Active/Passive Corrosion Protection on Copper

Coatings with only passive protection cannot offer long-term anticorrosion on metals. Eco-friendly sustainable and responsive coating for active/passive corrosion protection is desirable to extend the service life of metals. Here, benzotriazole (BTA)-metal organic frameworks (Cu-MOFs, UiO-66) were embedded in silica (SiO2) coating by one-step electrodeposition on copper. Combined with passive capability of MOFs and active protection of BTA inhibitor, the composite coating (BTA-MOF/SiO2) exhibited high and stable corrosion resistance, confirmed by microstructure characterizations and electrochemical tests. As a result, the as-prepared composite coating exhibited superhydrophobicity with a water contact angle of 154.2°. With loading of BTA-MOF in SiO2 coating, the impedance modulus at 0.01 Hz increased by ∼10-fold and the corrosion current density decreased to 3.472 × 10-9 A·cm-2. Immersion and salt spray tests confirmed the long-term protection of the composite coating. The responsive release of BTA inhibitor endows the coating with a responsively anticorrosive behavior. The active-passive ability makes the coating a good candidate for protection on metals used in highly salty environments.

Facile Recycling Strategy of Dyed Polyester Waste by Template-Based Synthesis of UiO-66 for Value-Added Transformation into Self-detoxifying Fabrics

Polyethylene terephthalate (PET) accounts for a significant portion of textile waste, and recycling strategies for this material have attracted much attention. This study proposes a facile and innovative PET recycling method applicable to environmental remediation that involves the conversion of dyed PET fabric waste into a value-added fabric. Herein, a template-based synthesis approach capable of growing a UiO-66 metal-organic framework (MOF) directly on a dyed PET fabric is reported. The advantage of this process lies in its simplicity, where the partial hydrolysis of PET followed by a zirconium chloride treatment results in the successful growth of UiO-66 on a dyed PET fabric with the concurrent removal of the dye without additional steps. The catalytic performance of the UiO-66-grown fabric was evaluated through the degradation of dimethyl 4-nitrophenyl phosphate (DMNP), a nerve agent simulant. The fabric produced by the simple metal treatment (Zr@PEThyd) exhibited excellent DMNP degradation performance with t1/2 = 43.3 min and maintained functional stability after a harsh washing procedure, an outcome attributed to the surface-assisted UiO-66 growth that ensured good bonding stability. The developed process is innovative in that it uses dyed PET waste as a template for the direct growth of UiO-66, simplifying the process without compromising the catalytic functionality. This research provides an informative option for a sustainable textile recycling strategy by transforming dyed PET waste into an advanced self-detoxifying material.

Waste polyethylene terephthalate plastic derived Zr-MOF for high performance supercapacitor applications

The chemical conversion of plastic waste into metal-organic framework (MOF) materials has emerged as a significant research field in addressing issues associated to the environment and the economy. The significant advantages of MOFs as electrode material for energy/supercapacitors arises from their extensive surface area and notable porosity. The present study involved the synthesis of Zirconium-Metal Organic Frameworks (Zr-MOF) by the solvothermal method, utilizing plastic waste in the form of Polyethylene terephthalate (PET) bottles. The morphological and structural characteristics of the Zr-MOF were inspected through several analytical techniques, including scanning electron microscopy, transmission electron microscopy, X-ray diffraction, and Fourier-transform infrared spectroscopy analysis. The as prepared Zr-MOF demonstrated very high specific surface area of 927.567 m2 g-1 with mesoporous nature of the materials estimate by BJH method. The electrochemical characteristics of the Zr-MOF in 3-electrode system exhibited a notable specific capacitance of 822 F g-1 when subjected to a low scan rate of 2 mV S-1, while the specific capacitance estimated through galvanostatic charge-discharge exhibited an enhanced value of 890 F g-1 at a current density of 0.5 A g-1. Additionally, the working electrode composed of Zr-MOF demonstrated noteworthy capacitance retention of 92% after 5000 charge discharge cycles. This research presents novel opportunities for the utilization of waste PET bottles in fabrication of highly functional Zr-MOF, aiming to advance the development of next-generation supercapacitors and environmental remediation.

Green Synthesis of CoZn-Based Metal-Organic Framework (CoZn-MOF) from Waste Polyethylene Terephthalate Plastic As a High-Performance Anode for Lithium-Ion Battery Applications

The recycling of discarded polyethylene terephthalate (PET) plastics produced metal-organic frameworks can effectively minimize environmental pollution and promote sustainable economic development. In this study, we developed a method using NaOH in alcohol and ether solvent environments to degrade PET plastics for synthesizing terephthalic acid. The method achieved a 97.5% degradation rate of PET plastics under a reaction temperature of 80 °C for 60 min. We used terephthalic acid as a ligand from the degradation products to successfully synthesize two types of monometallic and bimetallic CoZn-MOF materials. We investigated the impact of different metal centers and solvents on the electrochemical performance of the MOF materials. The result showed that the MOF-DMF/H2O material maintained a specific capacity of 1485.5 mAh g-1 after 100 cycles at a current density of 500 mA g-1, demonstrating excellent rate capability and cycling stability. In addition, our finding showed that the performance difference might be attributed to the synergistic effect of bimetallic Co2+ and Zn2+ in MOF-DMF/H2O, rapid lithium-ion diffusion and electron transfer rates, and the absence of coordinating solvents. Additionally, the non-in situ X-ray powder diffraction, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy analysis results showed that lithium storage in the MOF-DMF/H2O electrode mainly depended on the aromatic C6 ring and carboxylate portions of the organic ligands in different charge and discharge states. Lithium ions can be reversibly inserted/removed into/from the electrode material. The physical adsorption on the MOF surface through electrostatic interactions enhanced both capacity and cycling stability. This research provides valuable insight for mitigating solid waste pollution, promoting sustainable economic development, and advancing the extensive applications of MOF materials in lithium-ion batteries.

Metal-organic frameworks (MOFs) for energy production and gaseous fuel and electrochemical energy storage applications

The increasing energy demands in society and industrial sectors have inspired the search for alternative energy sources that are renewable and sustainable, also driving the development of clean energy storage and delivery systems. Various solid-state materials (e.g., oxides, sulphides, polymer and conductive nanomaterials, activated carbon and their composites) have been developed for energy production (water splitting-H2 production), gaseous fuel (H2 and CH4) storage and electrochemical energy storage (batteries and supercapacitors) applications. Nevertheless, the low surface area, pore volume and conductivity, and poor physical and chemical stability of the reported materials have resulted in higher requirements and challenges in the development of energy production and energy storage technologies. Thus, to overcome these issues, the development of metal-organic frameworks (MOFs) has attracted significant attention. MOFs are a class of porous materials with extremely high porosity and surface area, structural diversity, multifunctionality, and chemical and structural stability, and thus they can be used in a wide range of applications. In the present review, we precisely discuss the interesting properties of MOFs and the various methodologies for their synthesis, and also the future dependence on the valorization of solid waste for the recovery of metals and organic ligands for the synthesis of new classes of MOFs. Subsequently, the utilization of these interesting characteristics for energy production (water splitting), storage of gaseous fuels (H2 and CH4), and electrochemical storage (batteries and supercapacitors) applications are described. However, although MOFs are efficient materials with versatile uses, they still have many challenges, limiting their practical applications. Therefore, finally, we highlight the challenges associated with MOFs and show the way forward in overcoming them for the development of these highly porous materials with large-scale practical utility.

MIL-53(Al) assisted in upcycling plastic bottle waste into nitrogen-doped hierarchical porous carbon for high-performance supercapacitors

Disposable aluminum cans and plastic bottles are common wastes found in modern societies. This article shows that they can be upcycled into functional materials, such as metal-organic frameworks and hierarchical porous carbon nanomaterials for high-value applications. Through a solvothermal method, used poly(ethylene terephthalate) bottles and aluminum cans are converted into MIL-53(Al). Subsequently, the as-prepared MIL-53(Al) can be further carbonized into a nitrogen-doped (4.52 at%) hierarchical porous carbon framework. With an optical amount of urea present during the carbonization process, the carbon nanomaterial of a high specific surface area of 1324 m2 g-1 with well-defined porosity can be achieved. These features allow the nitrogen-doped hierarchical porous carbon to perform impressively as the working electrode of supercapacitors, delivering a high specific capacitance of 355 F g-1 at 0.5 A g-1 in a three-electrode cell and exhibiting a high energy density of 20.1 Wh kg-1 at a power density of 225 W kg-1, while simultaneously maintaining 88.2% capacitance retention over 10,000 cycles in two-electrode system. This work demonstrates the possibility of upcycling wastes to obtain carbon-based high-performance supercapacitors.

Green valorization of PET waste into functionalized Cu-MOF tailored to catalytic reduction of 4-nitrophenol

Metal-organic frameworks (MOFs) are attractive functional materials due to their high surface area, high porosity, and flexible compositions. However, the high precursor cost and complex synthetic processes hinder their large-scale applications. Herein, a novel green approach has been developed toward the synthesis of Cu-based MOF by a solvent-free mechano-synthesis method and utilizing consumed polyethylene terephthalate (PET)-derived benzenedicarboxylate (BDC) as the linker. The as-prepared CuBDC and aminated CuBDC (CuBDC-NH2) act as green catalysts for the reduction of deleterious 4-nitrophenol (4-NP) into the value-added 4-aminophenol (4-AP). Compared with CuBDC, CuBDC-NH2 shows increased adsorption capability and reduction efficiency. The mechanism and thermodynamic studies suggest that the adsorption of 4-NP on CuBDC-NH2 is an endothermic, spontaneous, favorable, and physical adsorption process. Furthermore, CuBDC-NH2 can expedite the reduction of 4-NP by participating in an adsorptive catalytic process. With the CuBDC-NH2 catalyst, the catalytic normalized kinetic rate of 4-NP was achieved 11.28 mol/min. mg, outperforming state-of-the-art catalysts, and a complete reduction occur in 5 min for a concentrated effluent (200-ppm 4-NP). The plastic waste-derived MOF-mediated catalytic valorization of organic pollutants demonstrated here opens an avenue for the green recycling/utilization of plastic waste, providing meaningful insights into the sustainable management of organic pollutants in wastewater.

Metal-organic frameworks and plastic: an emerging synergic partnership

Mismanagement of plastic waste results in its ubiquitous presence in the environment. Despite being durable and persistent materials, plastics are reduced by weathering phenomena into debris with a particle size down to nanometers. The fate and ecotoxicological effects of these solid micropollutants are not fully understood yet, but they are raising increasing concerns for the environment and people's health. Even if different current technologies have the potential to remove plastic particles, the efficiency of these processes is modest, especially for nanoparticles. Metal-organic frameworks (MOFs) are crystalline nano-porous materials with unique properties, have unique properties, such as strong coordination bonds, large and robustus porous structures, high accessible surface areas and adsorption capacity, which make them suitable adsorbent materials for micropollutants. This review examines the preliminary results reported in literature indicating that MOFs are promising adsorbents for the removal of plastic particles from water, especially when MOFs are integrated in porous composite materials or membranes, where they are able to assure high removal efficiency, superior water flux and antifouling properties, even in the presence of other dissolved co-pollutants. Moreover, a recent trend for the alternative preparation of MOFs starting from plastic waste, especially polyethylene terephthalate, as a sustainable source of organic linkers is also reviewed, as it represents a promising route for mitigating the impact of the costs deriving from the widescale MOFs production and application. This connubial between MOFs and plastic has the potential to contribute at implementing a more effective waste management and the circular economy principles in the polymer life cycle.

Acidolysis of Poly(ethylene terephthalate) Waste Using Succinic Acid under Microwave Irradiation as a New Chemical Upcycling Method

A novel method of chemical upcycling of used poly(ethylene terephthalate) (PET) bottles by acidolysis with succinic acid (SA) was performed under microwave irradiation. The long polyester chain of PET was efficiently fragmented into small molecules and oligomers, such as terephthalic acid and α,ω-dicarboxylic acid oligo(ethylene succinate-co-terephthalate) (OEST). Various input molar ratios of SA/PET from 1.0 to 2.5 were used, and the product mixtures were separated successfully. The recovered terephthalic acid can be reused as a basic chemical. The α,ω-dicarboxylic acid OEST was used as a curing agent for epoxy resin. The recovered SA can be reused for further PET acidolysis. Structures of OEST were identified by Fourier transform infrared (FTIR) spectroscopy, ¹H NMR spectroscopy, and electrospray ionization-mass spectrometry (ESI-MS). The presence of succinic anhydride as a side product was confirmed by FTIR and ESI-MS analyses. The evaporation of SA and the formation of volatile succinic anhydride compete with the acidolysis of PET. The minimum SA/PET ratio of 1.0 was selected so that the acidolysis was effective and without the SA recovery step by MEK treatment. OEST-1.0 was used for curing diglycidyl ether of bisphenol A. The structures and thermal properties of cured adducts were confirmed by FTIR and differential scanning calorimetry (DSC). This chemical upcycling method of PET is eco-friendly without the use of a solvent and a catalyst for the reaction, and all materials were recovered and they could be reused for novel polymer preparation.

Waste PET Plastic-Derived CoNi-Based Metal-Organic Framework as an Anode for Lithium-Ion Batteries

Recycling waste PET plastics into metal-organic frameworks is conducive to both pollution alleviation and sustainable economic development. Herein, we have utilized waste PET plastic to synthesize CoNi-MOF applied to lithium battery anode materials via a low-temperature solvothermal method for the first time. The preparation process is effortless, and the sources' conversion rate can reach almost 100%. In addition, the anode performance of MOFs with various Co/Ni mole ratios was investigated. The as-synthesized Co0.8Ni-MOF exhibits excellent crystallinity, purity, and electrochemical performance. The initial discharge and charge capacities are 2496 and 1729 mAh g-1, respectively. Even after 200 cycles, the Co0.8Ni-MOF electrode can exhibit a high Coulombic efficiency of over 99%. Consequently, given the environmental and economic benefits, the Co0.8Ni-MOF derived from waste PET plastic is thought to be an appealing anode material for lithium-ion batteries.

Comparative evaluation of Fe-, Zr-, and La-based metal-organic frameworks derived from recycled PET plastic bottles for arsenate removal

Metal-organic frameworks (MOFs) derived from recycled polyester (polyethylene terephthalate, PET) bottles were investigated in both batch and column studies for the removal of arsenate. As-synthesized Fe-MOF, Zr-MOF, and La-MOF were systematically analyzed by SEM, PXRD, FTIR, BET, and XPS techniques. The obtained MOFs showed high crystallinity with the specific surface areas of 128.3, 290.4, and 61.8 m²/g for Fe-MOF, Zr-MOF, and La-MOF, respectively. The Langmuir isotherm and pseudo-second-order kinetic model simulated arsenate adsorption on MOF materials well, which can be explained by electrostatic interactions, surface complexation, and ligand exchange mechanisms. The maximum adsorption capacities of arsenate onto Fe-MOF, Zr-MOF, and La-MOF were found to be 70.02, 85.72, and 114.28 mg/g at pH 7, respectively. The effect of pH and co-existing anions on the arsenate adsorption on MOF materials was also evaluated for practical applications. The MOF materials showed reduced adsorption capacity for arsenate by less than 10% up to four cycles of regeneration and did not induce any significant (p > 0.05) acute toxicity (<2.5% mortality) in Daphnia magna. In a flow-through system, Fe-MOF, Zr-MOF, and La-MOF were used to treat 176, 255, and 398 mL bed volumes of arsenate contaminated water, respectively, and consistently reduced the concentration of arsenate ions from 500 to 10 μg/L. This study clearly demonstrated that MOF materials derived from waste PET bottles are economically promising adsorbents for the successful elimination of arsenate species from aqueous environments.

A novel strontium-based MOF: synthesis, characterization, and promising application in removal of 152+154Eu from active waste

Removal of hazardous radioactive materials such as 152+154Eu from active waste using the batch approach has attracted attention nowadays. In this work, a novel melamine-terephthalic strontium metal-organic framework (MTSr-MOF) was prepared via a hydrothermal method. The MTSr-MOF was characterized by various analytical techniques such as FT-IR, 1H/13C-NMR, mass spectroscopy, XPS, XRD, TGA, BET, FE-SEM/EDX, TEM, and UV. The obtained data revealed that MTSr-MOF exhibited brick-like building blocks that were bridged together by the linkers, and each block had a thickness of ∼120 nm. The BET surface area was 74.04 m2 g-1. MTSr-MOF was used for the removal of 152+154Eu radionuclides from active waste. Further functionalization using various modifiers, including oxalic acid, EDTA, sulfuric acid, and sodium hydroxide was carried out to improve the sorption efficiency of MTSr-MOF towards 152+154Eu radionuclides. Among them, MTSr-MOF modified with oxalic acid (MTSr-OX-MOF) demonstrated a superior removal efficiency toward 152+154Eu radionuclides when compared to MTSr-MOF or other published reports, with a removal efficiency of more than 96%. The higher sorption efficiency of the MTSr-OX-MOF indicates that it could be a promising candidate for the removal of 152+154Eu radionuclides from radioactive waste.

Thermocatalytic Hydrogenation of CO2 to Methanol Using Cu-ZnO Bimetallic Catalysts Supported on Metal–Organic Frameworks

The thermocatalytic hydrogenation of carbon dioxide (CO2) to methanol is considered as a potential route for green hydrogen storage as well as a mean for utilizing captured CO2, owing to the many established applications of methanol. Copper–zinc bimetallic catalysts supported on a zirconium-based UiO-66 metal–organic framework (MOF) were prepared via slurry phase impregnation and benchmarked against the promoted, co-precipitated, conventional ternary CuO/ZnO/Al2O3 (CZA) catalyst for the thermocatalytic hydrogenation of CO2 to methanol. A decrease in crystallinity and specific surface area of the UiO-66 support was observed using X-ray diffraction and N2-sorption isotherms, whereas hydrogen-temperature-programmed reduction and X-ray photoelectron spectroscopy revealed the presence of copper active sites after impregnation and thermal activation. Other characterisation techniques such as scanning electron microscopy, transmission electron microscopy, and thermogravimetric analysis were employed to assess the physicochemical properties of the resulting catalysts. The UiO-66 (Zr) MOF-supported catalyst exhibited a good CO2 conversion of 27 and 16% selectivity towards methanol, whereas the magnesium-promoted CZA catalyst had a CO2 conversion of 31% and methanol selectivity of 24%. The prepared catalysts performed similarly to a CZA commercial catalyst which exhibited a CO2 conversion and methanol selectivity of 30 and 15%. The study demonstrates the prospective use of Cu-Zn bimetallic catalysts supported on MOFs for direct CO2 hydrogenation to produce green methanol.

A facile and sustainable one-pot approach to the aqueous and low-temperature PET-to-UiO-66(Zr) upcycling

Accelerating waste management requires the conversion of polymer waste to value-added materials through sustainable approaches. While depolymerised PET has been used as feedstock to produce metal-organic frameworks, this is the first report of the successful one-pot hydrothermal synthesis of the desirable UiO-66 topology through the judicious choice of reactants, modulators and reaction conditions.

Upcycling of Hazardous Metals and PET Waste derived Metal-Organic Frameworks: A Review in Recent Progress and Prospects

An intense increase in non-biodegradable plastics and waste metals is an immediate threat to the world and needs to be addressed urgently. There are several strategies deployed to control, eliminate,...

Hydrolysis of waste polyethylene terephthalate catalyzed by easily recyclable terephthalic acid

Hydrolysis of polyethylene terephthalate (PET) is an efficient strategy for the depolymerization of waste PET to terephthalic acid (TPA), which can be used as a fundamental building block for the repolymerization of PET or for the synthesis of biodegradable plastics and metal-organic frameworks. However, most of the reported hydrolysis catalysts are strong acids or bases, which are soluble in reaction media and difficult to separate after the reaction, leading to high production costs and a profound influence on the environment. Herein, we propose the use of TPA, the basic unit of PET, as an acid catalyst to promote the hydrolysis of PET. Under optimized conditions, i.e., 2.5 g of PET, a TPA concentration of 0.1 g/mL, mass ratio PET:H₂O of 1:8, 220 °C of temperature, and 180 min of reaction time, a PET conversion of up to 100.0% and a TPA yield of 95.5% were achieved. Furthermore, the produced TPA exhibited a high purity of 99%, similar to that of fresh TPA, and was easily recoverable for PET hydrolysis without tedious workup and purification processes. More importantly, the hydrolysis efficiency was maintained over eight consecutive reaction cycles. Overall, this study provides a green, easy, and low-cost technology to recover and reuse TPA for waste PET hydrolysis.

A Showcase of Green Chemistry: Sustainable Synthetic Approach of Zirconium-Based MOF Materials

Zirconium-based metal-organic framework materials (Zr-MOFs) have more practical usage over most conventional benchmark porous materials and even many other MOFs due to the excellent structural stability, rich coordination forms, and various active sites. However, their mass-production and application are restricted by the high-cost raw materials, complex synthesis procedures, harsh reaction conditions, and unexpected environmental impact. Based on the principles of "Green Chemistry", considerable efforts have been done for breaking through the limitations, and significant progress has been made in the sustainable synthesis of Zr-MOFs over the past decade. In this review, the advancements of green raw materials and green synthesis methods in the synthesis of Zr-MOFs are reviewed, along with the corresponding drawbacks. The challenges and prospects are discussed and outlooked, expecting to provide guidance for the acceleration of the industrialization and commercialization of Zr-MOFs.

Combining Organic and Inorganic Wastes to Form Metal-Organic Frameworks

This paper reports a simple method to recycle plastic-bottle and Li-ion-battery waste in one process by forming valuable coordination polymers (metal–organic frameworks, MOFs). Poly(ethylene terephthalate) from plastic bottles was depolymerized to produce an organic ligand source (terephthalate), and Li-ion batteries were dissolved as a source of metals. By mixing both dissolution solutions together, selective precipitation of an Al-based MOF, known as MIL-53 in the literature, was observed. This material can be recovered in large quantities from waste and presents similar properties of purity and porosity to as-synthesis MIL-53. This work illustrates the opportunity to form hybrid porous materials by combining different waste streams, laying the foundations for an achievable integrated circular economy from different waste cycle treatments (for batteries and plastics).