Ru0 or RuII: A Study on Stabilizing the “Activated” Form of Ru-PNP Complexes with Additional Phosphine Ligands in Alcohol Dehydrogenation and Ester Hydrogenation

Iron Complexes of 4,5-Bis(diorganophosphinomethyl)acridine Ligands

The search for an iron analog of the established ruthenium-based catalysts containing methylene-extended 4,5-bis(diorganophosphinomethyl)acridine ligands, [FeHCl(CO)(LR)], resulted in the discovery of a bidentate coordination mode of these usually tridentate pincer ligands toward iron. The acridines nitrogen atom does not coordinate to iron, leading to the formation of iron diphos-type complexes with unusually large cis bite angles of up to 124° as well as trans bite angles around 155°. The iron-containing complexes [FeCl2(κ2-LR)] (R = iPr, Ph), [FeX2(κ2-LCy)] (X = Cl, Br) and [Fe(CO)3(κ2-LR)] (R = iPr, Cy) have been isolated in crystalline form and characterized by spectroscopic methods and mass spectrometry. Their structures were verified unambiguously through X-ray diffraction. The stability of the iron(II) complexes decreased in the order Cy > Ph > iPr and Cl > Br > I, although all iron(II) complexes were found to be relatively stable enough for short-term handling in air in the solid state. Notably, no iron(0) complex of the phenyl derivative could be isolated. The iron(0) complex [Fe(CO)3(κ2-LCy)] was found to be significantly more stable toward hydrolysis and oxygen compared to [Fe(CO)3(κ2-LiPr)] and can be stored in air for months without significant decomposition in the solid state, while [Fe(CO)3(κ2-LiPr)] decomposes in air within seconds. The decomposition products [FeI2(κ2-O2LCy)], [{Fe(CO)3(κ2-HLR)}2] (R = iPr, Cy) and [FeCl2(CO)2(κ1-LCy)(κ1-OLCy)] were identified and characterized crystallographically. The iron(0) complex [Fe(CO)3(κ2-LCy)] is oxidized by [Fe(Cp)2](BPh4) to give the paramagnetic, low-spin iron(I) cation [Fe(CO)3(κ2-LCy)]+. The electron paramagnetic resonance spectrum of the highly sensitive cation as well as density functional theory calculations suggest a partial delocalization of the unpaired electron over the three carbonyl ligands and the acridines aromatic ring system. The catalytic activity and photophysical properties of the complexes have been preliminarily investigated.

Double Intramolecular 1,2 C-H Addition of o-Methyl Groups To Form Ruthenium Pincer Double Tuck-In Complexes

Ruthenium pincer complexes have a rich history of coordination and reaction chemistries. In this work, we report our discoveries of previously unreported Ru pincer coordination geometries. We found that mono tuck-in κ4-ArPNHPRuLCl complexes react with NaN(SiMe3)2 producing double tuck-in mer-κ5-ArPNHPRuL complexes. Interestingly, when κ4-MesPNHPRuCl is dehydrohalogenated, the resulting double tuck-in complex binds N2, forming the nitrogen complex κ5-MesPNHPRuN2. The mer-κ5-ArPNHPRuL complexes thermally isomerize to the fac-κ5-ArPNHPRuL isomers, which is an uncommon reaction for pincer complexes. The mer-κ5-ArPNHPRuL complexes react with CO and CO2 to form amide κ4-ArPNHPRu(CO)L or carbamate κ5-ArPN(CO2)PRuL complexes, respectively, supporting the hypothesis that the κ4-ArPNPRuL amide intermediates are accessible and reactive.

Production of carbon monoxide and hydrogen from methanol using a ruthenium pincer complex: a DFT study

To understand the mechanism of the dehydrogenation of methanol to CO and H2 catalyzed by a ruthenium pincer complex, a density functional theory (DFT) study has been conducted on two different cycles which differ in the substances entering the cycle (methanol (cycle 1) versus methoxymethanol (cycle 2)). Our calculated results show that both cycles consist of three stages: dehydrogenation of alcohol to aldehyde (stage I); hydrogen formation (stage II); and decarbonylation with the regeneration of the catalyst (stage III). The energy barriers of the rate-determining steps for cycles 1 and 2 are 49.6 and 28.5 kcal mol-1, respectively. Thus cycle 2 is more energetically feasible. For stage III of cycle 2, our results did not support the mechanism proposed in the experiment (CO release occurs prior to decarbonylation). Instead, we suggested and examined an alternative pathway, that is, decarbonylation occurs prior to CO release. The mechanistic insights gained in the present paper could be beneficial for further designing of these kinds of reactions.

Performance of homogeneous catalysts viewed in dynamics

Effective assessment of catalytic performance is the foundation for the rational design and development of new catalysts with superior performance. The ubiquitous screening/optimization studies use reaction yields as the sole performance metric in an approach that often neglects the complexity of the catalytic system and intrinsic reactivities of the catalysts. Using an example of hydrogenation catalysis, we examine the transient behavior of catalysts that are often encountered in activation, deactivation and catalytic turnover processes. Each of these processes and the reaction environment in which they take place are gradually shown to determine the real-time catalyst speciation and the resulting kinetics of the overall catalytic reaction. As a result, the catalyst performance becomes a complex and time-dependent metric defined by multiple descriptors apart from the reaction yield. This behaviour is not limited to hydrogenation catalysis and affects various catalytic transformations. In this feature article, we discuss these catalytically relevant descriptors in an attempt to arrive at a comprehensive depiction of catalytic performance.

Computational mechanistic studies of ruthenium catalysed methanol dehydrogenation

Homogeneous ruthenium catalysed methanol dehydrogenation could become a key reaction for hydrogen production in liquid fuel cells. In order to improve existing catalytic systems, mechanistic insight is paramount in directing future studies. Herein, we describe what computational mechanistic research has taught us so far about ruthenium catalysed dehydrogenation reactions. In general, two mechanistic pathways can be operative in these reactions: a metal-centered or a metal-ligand cooperative (Noyori-Morris type) minimum energy reaction pathway (MERP). Discerning between these mechanisms on the basis of computational studies has proven to be highly input dependent, and to circumvent pitfalls it is important to consider several factors, such as solvent effects, metal-ligand cooperativity, alternative geometries, and complex electronic structures of metal centres. This Frontiers article summarizes the reported computational research performed on ruthenium catalyzed dehydrogenation reactions performed in the past decade, and serves as a guide for future research.

Bulky PNP ligands blocking metal-ligand cooperation allow for isolation of Ru(0), and lead to catalytically active Ru complexes in acceptorless alcohol dehydrogenation

We synthesized two 4Me-PNP ligands which block metal-ligand cooperation (MLC) with the Ru center and compared their Ru complex chemistry to their two traditional analogues used in acceptorless alcohol dehydrogenation catalysis. The corresponding 4Me-PNP complexes, which do not undergo dearomatization upon addition of base, allowed us to obtain rare, albeit unstable, 16 electron mono CO Ru(0) complexes. Reactivity with CO and H 2 allows for stabilization and extensive characterization of bis CO Ru(0) 18 electron and Ru(II) cis and trans dihydride species that were also shown to be capable of C(sp2)-H activation. Reactivity and catalysis are contrasted to non-methylated Ru(II) species, showing that an MLC pathway is not necessary, with dramatic differences in outcomes during catalysis between i Pr and t Bu PNP complexes within each of the 4Me and non-methylated backbone PNP series being observed. Unusual intermediates are characterized in one of the new and one of the traditional complexes, and a common catalysis deactivation pathway was identified.

HCOOH disproportionation to MeOH promoted by molybdenum PNP complexes

Molybdenum(0) complexes with aliphatic aminophosphine pincer ligands have been prepared which are competent for the disproportionation of formic acid, thus representing the first example so far reported of non-noble metal species to catalytically promote such transformation. In general, formic acid disproportionation allows for an alternative access to methyl formate and methanol from renewable resources. MeOH selectivity up to 30% with a TON of 57 could be achieved while operating at atmospheric pressure. Selectivity (37%) and catalyst performance (TON = 69) could be further enhanced when the reaction was performed under hydrogen pressure (60 bars). A plausible mechanism based on experimental evidence is proposed.

Mo(0) complexes with aliphatic PNP-pincer ligands enable the first example of non-noble metal catalyzed formic acid disproportionation leading to methanol with a selectivity of up to 37% and a turnover number up to 69.

The key role of the latent N-H group in Milstein's catalyst for ester hydrogenation

We previously demonstrated that Milstein's seminal diethylamino-substituted PNN-pincer-ruthenium catalyst for ester hydrogenation is activated by dehydroalkylation of the pincer ligand, releasing ethane and eventually forming an NHEt-substituted derivative that we proposed is the active catalyst. In this paper, we present a computational and experimental mechanistic study supporting this hypothesis. Our DFT analysis shows that the minimum-energy pathways for hydrogen activation, ester hydrogenolysis, and aldehyde hydrogenation rely on the key involvement of the nascent N-H group. We have isolated and crystallographically characterized two catalytic intermediates, a ruthenium dihydride and a ruthenium hydridoalkoxide, the latter of which is the catalyst resting state. A detailed kinetic study shows that catalytic ester hydrogenation is first-order in ruthenium and hydrogen, shows saturation behavior in ester, and is inhibited by the product alcohol. A global fit of the kinetic data to a simplified model incorporating the hydridoalkoxide and dihydride intermediates and three kinetically relevant transition states showed excellent agreement with the results from DFT.

Direct Heterogenization of the Ru-Macho Catalyst for the Chemoselective Hydrogenation of α,β-Unsaturated Carbonyl Compounds

In this study, a commercially available homogeneous pincer-type complex, Ru-Macho, was directly heterogenized via the Lewis acid-catalyzed Friedel-Crafts reaction using dichloromethane as the cross-linker to obtain a heterogeneous, pincer-type Ru porous organometallic polymer (Ru-Macho-POMP) with a high surface area. Notably, Ru-Macho-POMP was demonstrated to be an efficient heterogeneous catalyst for the chemoselective hydrogenation of α,β-unsaturated carbonyl compounds to their corresponding allylic alcohols using cinnamaldehyde as a model compound. The Ru-Macho-POMP catalyst showed a high turnover frequency (TOF = 920 h^-1) and a high turnover number (TON = 2750), with high chemoselectivity (99%) and recyclability during the selective hydrogenation of α,β-unsaturated carbonyl compounds.

Mechanistic Investigations of Ruthenium Catalyzed Dehydrogenative Thioester Synthesis and Thioester Hydrogenation

We have recently reported the previously unknown synthesis of thioesters by coupling thiols and alcohols (or aldehydes) with liberation of H₂, as well as the reverse hydrogenation of thioesters, catalyzed by a well-defined ruthenium acridine-9H based pincer complex. These reactions are highly selective and are not deactivated by the strongly coordinating thiols. Herein, the mechanism of this reversible transformation is investigated in detail by a combined experimental and computational (DFT) approach. We elucidate the likely pathway of the reactions, and demonstrate experimentally how hydrogen gas pressure governs selectivity toward hydrogenation or dehydrogenation. With respect to the dehydrogenative process, we discuss a competing mechanism for ester formation, which despite being thermodynamically preferable, it is kinetically inhibited due to the relatively high acidity of thiol compared to alcohol and, accordingly, the substantial difference in the relative stabilities of a ruthenium thiolate intermediate as opposed to a ruthenium alkoxide intermediate. Accordingly, various additional reaction pathways were considered and are discussed herein, including the dehydrogenative coupling of alcohol to ester and the Tischenko reaction coupling aldehyde to ester. This study should inform future green, (de)hydrogenative catalysis with thiols and other transformations catalyzed by related ruthenium pincer complexes.

Homogeneous and heterogeneous catalysts for hydrogenation of CO2 to methanol under mild conditions

This review summarizes the concepts, mechanisms, drawbacks and challenges of the state-of-the-art catalysis for CO₂ to MeOH under mild conditions. Thoughtful guidelines and principles for future research are presented and discussed.

Catalytic coproduction of methanol and glycol in one pot from epoxide, CO2, and H2

An atom (100%) and energy-efficient approach to coproduce two commodity chemicals, methanol and glycol, has been demonstrated for the first time using H₂, CO₂, and epoxide as feeds. A basic medium used for CO₂ capture, polyethyleneimine (PEI₆₀₀), is shown to facilitate the formation of a key reaction intermediate, cyclic carbonates. Upon hydrogenation of cyclic carbonates in the presence of a homogenous Ru-PNP catalyst, a 1 : 1 mixture of methanol and glycol is produced. This approach has been demonstrated in one pot by adding all the required reactants directly or stepwise. The stepwise addition of reactants resulted in good yields (>95% for PG and 84% for methanol) and selectivity of products.

An atom (100%) and energy-efficient approach to coproduce two commodity chemicals, methanol and glycol, has been demonstrated for the first time using H₂, CO₂, and epoxide as feeds.

Hydrogenation/dehydrogenation of N-heterocycles catalyzed by ruthenium complexes based on multimodal proton-responsive CNN(H) pincer ligands

Ru complexes based on lutidine-derived pincer CNN(H) ligands having secondary amine side donors are efficient precatalysts in the hydrogenation and dehydrogenation of N-heterocycles. Reaction of a Ru-CNN(H) complex with an excess of base produces the formation of a Ru(0) derivative, which is observed under catalytic conditions.