Syntheses of Square Planar Gallium Complexes and a Proton NMR Correlation Probing Metalloaromaticity

Expanding the Scope of Aluminum Chemistry with Noninnocent Ligands

ConspectusAluminum is the most abundant metal in the earth's crust at 8%, and it is also widely available domestically in many countries worldwide, which ensures a stable supply chain. To further the applications of aluminum (Al), such as in catalysis and electronic and energy storage materials, there has been significant interest in the synthesis and characterization of new Al coordination compounds that can support electron transfer (ET) and proton transfer (PT) chemistry. This has been achieved using redox and chemically noninnocent ligands (NILs) combined with the highly stable M(III) oxidation state of Al and in some cases the heavier group 13 ions, Ga and In.When ligands participate in redox chemistry or facilitate the breaking or making of new bonds, they are often termed redox or chemically noninnocent, respectively. Al(III) in particular supports rich ligand-based redox chemistry because it is so redox inert and will support the ligand across many charge and protonation states without entering into the reaction chemistry. To a lesser extent, we have reported on the heavier group 13 elements Ga and In, and this chemistry will also be included in this Account, where available.This Account is arranged into two technical sections, which are (1) Structures of Al-NIL complexes and (2) Reactivity of Al-NIL complexes. Highlights of the research work include reversible redox chemistry that has been enabled by ligand design to shut down radical coupling pathways and to prevent loss of H2 from unsaturated ligand sites. These reversible redox properties have in turn enabled the characterization of Class III electron delocalization through Al when two NIL are bound to the Al(III) in different charge states. Characterization of the metalloaromatic character of square planar Al and Ga complexes has been achieved, and characterization of the delocalized electronic structures has provided a model within which to understand and predict the ET and PT chemistry of the NIL group 13 compounds. The capacity of Al-NIL complexes to perform ET and PT has been employed in reactions that use ET or PT reactivity only or in reactions where coupled ET/PT affords hydride transfer chemistry. As an example, ligand-based PT reactions initiate metal-ligand cooperative bond activation pathways for catalysis: this includes acceptorless dehydrogenation of formic acid and anilines and transfer hydrogenation chemistry. In a complementary approach, ligand based ET/PT chemistry has been used in the study of dihydropyridinate (DHP-) chemistry where it was shown that N-coordination of group 13 ions lowers kinetic barriers to DHP- formation. Taken together, the discussion presented herein illustrates that the NIL chemistry of Al(III), and also of Ga(III) and In(III) holds promise for further developments in catalysis and energy storage.

Ligand-enforced geometric constraints and associated reactivity in p-block compounds

The geometry at an element centre can generally be predicted based on the number of electron pairs around it using valence shell electron pair repulsion (VSEPR) theory. Strategies to distort p-block compounds away from these predicted geometries have gained considerable interest due to the unique structural outcomes, spectroscopic properties or reactivity patterns engendered by such distortion. This review presents an up-to-date group-wise summary of this exciting and rapidly growing field with a focus on understanding how the ligand employed unlocks structural features, which in turn influences the associated reactivity. Relevant geometrically constrained compounds from groups 13-16 are discussed, along with selected stoichiometric and catalytic reactions. Several areas for advancement in this field are also discussed. Collectively, this review advances the notion of geometric tuning as an important lever, alongside electronic and steric tuning, in controlling bonding and reactivity at p-block centres.

Redox-active ligands - a viable route to reactive main group metal compounds

Anionic redox-active ligands such as o-amidophenolates, catecholates, dithiolenes, 1,2-benzendithiolates, 2-amidobenzenethiolates, reduced α-diimines, ferrocenyl and porphyrinates are capable of reversible oxidation and thus have the ability to act as sources of electrons for metal centres. These and other non-innocent ligands have been employed in coordination complexes of base transition metals to influence their redox chemistry and afford compounds with useful catalytic, optical, magnetic and conducting properties. Despite the focus in contemporary main group chemistry on designing reactive compounds with potential catalytic activity, comparatively few studies exploring the chemistry of main group metal complexes incorporating redox-active ligands have been reported. This article highlights relevant chemical reactivity and electrochemical studies that probe the oxidation/reduction of main group metal compounds possessing redox-active ligands and comments on the prospects for this relatively untapped avenue of research.

Calix[4]pyrrolato-germane-(thf)2: Unlocking the Anti-van't Hoff-Le Bel Reactivity of Germanium(IV) by Ligand Dissociation

Anti-van't Hoff-Le Bel configured p-block element species possess intrinsically high reactivity and are thus challenging to isolate. Consequently, numerous elements in this configuration, including square-planar germanium(IV), remain unexplored. Herein, we follow a concept to reach anti-van't Hoff-Le Bel reactivity by ligand dissociation from a rigid calix[4]pyrrole germane in its bis(thf) adduct. While the macrocyclic ligand assures square-planar coordination in the uncomplexed form, the labile thf donors provide robustness for isolation on a multigram scale. Unique properties of a low-lying acceptor orbital imparted to germanium(IV) can be verified, e.g., by isolating an elusive anionic hydrido germanate and exploiting it for challenging bond activations. Aldehydes, water, alcohol, and a CN triple bond are activated for the first time by germanium-ligand cooperativity. Unexpected behaviors against fluoride ion donors disclose critical interferences of a putative redox-coupled fluoride ion transfer during the experimental determination of Lewis acidity. Overall, we showcase how ligand lability grants access to the uncharted chemistry of anti-van't Hoff-Le Bel germanium(IV) and line up this element as a member in the emerging class of structurally constrained p-block elements.

Dissociative electron attachment to gold(I)-based compounds: 4,5-dichloro-1,3-diethyl-imidazolylidene trifluoromethyl gold(I)

With the use of proton-NMR and powder XRD (XRPD) studies, the suitability of specific Au-focused electron beam induced deposition (FEBID) precursors has been investigated with low electron energy, structure, excited states and resonances, structural crystal modifications, flexibility, and vaporization level. 4,5-Dichloro-1,3-diethyl-imidazolylidene trifluoromethyl gold(I) is a compound that is a uniquely designed precursor to meet the needs of focused electron beam-induced deposition at the nanostructure level, which proves its capability in creating high purity structures, and its growing importance in other AuIm_x and AuCl_nB (where x and n are the number of radicals, B = CH, CH₃, or Br) compounds in the radiation cancer therapy increases the efforts to design more suitable bonds in processes of SEM (scanning electron microscopy) deposition and in gas-phase studies. The investigation performed of its powder shape using the XRPD XPERT³ panalytical diffractometer based on CoK_α lines shows changes to its structure with change in temperature, level of vacuum, and light; the sensitivity of this compound makes it highly interesting in particular to the radiation research. Used in FEBID, though its smaller number of C, H, and O atoms has lower levels of C contamination in the structures and on the surface, it replaces these bonds with C-Cl and C-N bonds that have lower bond-breaking energy. However, it still needs an extra purification step in the deposition process, either H₂O, O₂, or H jets.

Diverse Cooperative Reactivity at a Square Planar Aluminium Complex and Catalytic Reduction of CO2

The use of a sterically demanding pincer ligand to prepare an unusual square planar aluminium complex is reported. Due to the constrained geometry imposed by the ligand scaffold, this four-coordinate aluminium centre remains Lewis acidic and reacts via differing metal-ligand cooperative pathways for activating ketones and CO₂ . It is also a rare example of a single-component aluminium system for the catalytic reduction of CO₂ to a methanol equivalent at room temperature.

Stereoinversion of tetrahedral p-block element hydrides

The potential energy surfaces of 15 tetrahedral p-block element hydrides were screened on the multireference level. It was addressed whether stereoinversion competes against other reactions, such as reductive H₂-elimination or hydride loss, and if so, along which pathway the stereomutation occurs. Importantly, stereoinversion transition structures for the ammonium cation (C_4v) and the tetrahydridoborate anion (C_s) were identified for the first time. Revisiting methane's C_s symmetric inversion transition structure with the mHEAT+ protocol revealed an activation enthalpy for stereoinversion, in contrast to all earlier studies, which is 5 kJ mol^-1 below the C-H bond dissociation enthalpy. Square planar structures were identified lowest in energy only for the inversion of AlH₄ ^-, but a novel stepwise C_s-inversion was discovered for SiH₄ or PH₄ ⁺. Overall, the present contribution delineates essentials of the potential energy surfaces of p-block element hydrides, while structure-energy relations offer design principles for the synthetically emerging field of structurally constrained compounds.

The inversion of tetrahedral p-block element compounds: general trends and the relation to the second-order Jahn-Teller effect

The tetrahedron is the primary structural motif among the p-block elements and determines the architecture of our bio- and geosphere. However, a broad understanding of the configurational inversion of tetrahedral compounds is missing. Here, we report over 250 energies (DLPNO-CCSD(T)) for square planar inversion of third- and fourth-period element species of groups 13, 14, and 15. Surprisingly low inversion barriers are identified for compounds of industrial relevance (e.g., ≈100 kJ mol-1 for Al(OH)4 -). More fundamentally, the second-order Jahn-Teller theorem is disclosed as suitable to rationalize substituent and central element effects. Bond analysis tools give further insights into the preference of eight valence electron systems with four substituents to be tetrahedral. Hence, this study develops a model to understand, memorize, and predict the angular flexibility of tetrahedral species. Perceiving the tetrahedron not as forcingly rigid but as a dynamic structural entity might leverage new approaches and visions for adaptive matter.

Calix[4]pyrrolato gallate: square planar-coordinated gallium(iii) and its metal–ligand cooperative reactivity with CO2 and alcohols

Forcing a priori tetracoordinate atoms into planar configuration represents a promising concept for enhanced reactivity of p-block element-based systems. Herein, the synthesis, characterization, and reactivity of calix[4]pyrrolato gallates, constituting square planar-coordinated gallium(iii) atoms, are reported. Unusual structural constraint-induced Lewis acidity against neutral and anionic donors is disclosed by experiment and rationalized by computations. An energetically balanced dearomatization/rearomatization of a pyrrole unit enables fully reversible metal–ligand cooperative capture of CO₂. While alcohols are found unreactive against the gallates, a rapid and selective OH-bond activation can be triggered upon protonation of the ligand. Secondary ligand–sphere modification adds a new avenue to structurally-constrained complexes that unites functional group tolerance with unconventional reactivity.

Ideally square-planar coordinated gallium(iii) species is isolated and fully characterized. Spontaneous metal–ligand cooperative reactivity towards CO₂ is observed, while OH-bond activation of alcohols can be triggered by protonation of the ligand.

Calix[4]pyrroles as ligands: recent progress with a focus on the emerging p-block element chemistry

Calix[4]pyrroles are readily synthesized in one step from pyrroles and ketones. For several decades, these macrocycles have been exploited as powerful anion receptors or ligands for transition and rare-earth metals. In contrast, calix[4]pyrrolates as ligands for p-block elements were established only in 2018. The present feature article reviews these developments, together with the recent progress on s-, d-, and f-block element complexes of the calix[4]pyrroles. Particular focus is given on the calix[4]pyrrolato aluminate and the corresponding silane, both featuring square planar-coordinated p-block elements in their highest oxidation states. These unique "anti-van't-Hoff-Le-Bel" structures introduce valuable characteristics into main-group element chemistry, such as agostic interactions or ligand-to-metal charge transfer absorptions. The most vital reactivities are highlighted, which rely on properties ranging from amphoterism, redox-activity, and a small HOMO-LUMO gap up to the ability to provide a platform for additional external stimuli. Overall, these developments underscore the beneficial impact of structural constraint of p-block elements and element-ligand cooperativity to enhance the functionality of the most abundant elements in their native oxidation states.

A bis(imino)carbazolate pincer ligand stabilized mononuclear gallium(I) compound: synthesis, characterization, and reactivity

The first bis(imino)carbazolate pincer ligand supported mononuclear Ga(I) compound LGa: (3) was synthesized and fully characterized. Oxidation of 3 with elemental selenium afforded the dinuclear Ga(III) compound [LGa(μ-Se)]₂ (4) bearing two bridging Se atoms. Ligand substitution of Cr(CO)₆ with 3 under UV light irradiation afforded the gallylene-chromium complex LGa: → Cr(CO)₅ (5). In addition, the attempted synthesis of the aluminium analogue LAl: through reduction of LAlI₂ (7) only led to isolation of the dinuclear Al(III) compound (LAlI)₂ (8), most probably formed through the C-C coupling of two imino radicals.

Heavier element-containing aromatics of [4n+2]-electron systems

While the implication of the aromaticity concept has been dramatically expanded to date since its emergence in 1865, the classical [4n+2]/4n-electron counting protocol still plays an essential role in evaluating the aromatic nature of compounds. Over the last few decades, a variety of heavier heterocycles featuring the formal [4n+2] π-electron arrangements have been developed, which allows for assessing their aromatic nature. In this review, we present recent developments of the [4n+2]-electron systems of heavier heterocycles involving group 13-15 elements. The synthesis, spectroscopic data, structural parameters, computational data, and reactivity are introduced.

Planar Tetracoordinated Silicon (ptSi): Room-Temperature Stable Compounds Containing Anti-van't Hoff/Le Bel Silicon

While a variety of compounds containing planar tetracoordinated carbon (ptC), the so-called anti-van't Hoff/Le Bel carbon, are known experimentally, stable systems containing planar tetracoordinated silicon (ptSi) are barely known. As part of our studies on the application of stereoelectronically well-defined transition-metal fragments to stabilize silicon in unprecedented bonding modes, we report herein the synthesis and full characterization of a series of thermally stable complexes of the general formula [Tp'(CO)₂MSiC(R¹)C(R²)M(CO)₂Tp'] (M = Mo, W; R¹ = R² = Me or R¹ = H, R² = SiMe₃, Ph; Tp' = κ³-N,N',N″-hydridotris(3,5-dimethylpyrazolyl)borate), which incorporate a ptSi atom in addition to two ptC atoms. The complexes were obtained by reacting the metallasilylidyne complexes [Tp'(CO)₂M≡Si-M(CO)₂(PMe₃)Tp'] with alkynes R¹C≡CR² and were comprehensively analyzed by experimental studies and quantum chemical calculations. The analyses revealed that the ptSi atom is embedded in a tricyclic trapezoidal core featuring one internal SiC₂ and two outer M-Si-C three-membered rings, which are fused via two Si-C bonds. The structural peculiarities evoked by the presence of an anti-van't Hoff/Le Bel ptSi center, such as the short M-Si bonds, a nearly linear M-Si-M spine, long M-C bonds, and the presence of two planar tetracoordinated carbon atoms were elucidated by a detailed analysis of the electronic structure, suggesting that one factor for the stabilization of the ptSi geometry is the aromaticity of the central SiC₂ ring having two delocalized π electrons. Remarkably, the results further indicate the existence of both anti-van't Hoff/Le Bel carbon and silicon centers next to each other in the isolated complexes.

Delocalization tunable by ligand substitution in [L2Al]n− complexes highlights a mechanism for strong electronic coupling

Organo-aluminum mixed-valent complexes combine properties of both organic and transition element mixed-valent compounds. This supports delocalized electronic structures that are structurally and electronically tunable.

Parametrizing the Spatial Dependence of 1H NMR Chemical Shifts in π-Stacked Molecular Fragments

Most recently a renewed interest in several areas has arisen in factors governing the 1H NMR chemical shift (1H CS) of protons in aromatic systems. Therefore, it is important to describe how 1H CS values are affected by π-stacking intermolecular interactions. The parametrization of radial and angular dependences of the 1H CS is proposed, which is based on conventional gauge-independent atomic orbital (GIAO) calculations of explicit molecular fragments. Such a parametrization is exemplified for a benzene dimer with intermonomer vertical and horizontal distances which are in the range of values often found in crystals of organic compounds. Results obtained by the GIAO calculations combined with B3LYP and MP2 methods were compared, and revealed qualitatively the same trends in the 1H CS data. The parametrization was found to be quantitatively correct for the T-shaped benzene dimers, and its limitations were discussed. Parametrized 1H CS surfaces should become useful for providing additional restraints in the search of site-specific information through an analysis of structurally induced 1H CS changes.