In Situ Decorated Ni Metallic Layer with CoS2-Layered Thin Films via a Layer-by-Layer Strategy Using Pulsed Laser Deposition for Enhanced Electrocatalytic OER

Pulsed Laser Ablation of Oxygen deficiency Enriched Superlattice Vanadium Pentoxide (V2O5) Ultrathin Nextrode aiming for Flexible Binder-less Tandem Energy Harvesting Devices

For the initial instance, oxygen deficiency-enriched vanadium pentoxide (O─V2O5@500) thin film electrodes are tuned by the Pulsed Laser Ablation technique. The O─V2O5@500 thin film electrode shows remarkable electrochemical performances confirming the greater potential window of -0.4 to 0.9 V versus Hg/HgO in an alkaline electrolyte; also, the O─V2O5@ 500 thin film electrode exhibits a noteworthy volumetric capacity of 167.7 mAh cm-3 (areal capacity of 73.3 µAh cm-2). Additionally, Density Functional Theory (DFT) theory calculations are carried out for oxygen-deficient V2O5. From the partial density of states (pDOS) and partial charge density analysis, it is clear that oxygen vacancy improves the electrical conductivity due to the higher degree of electron delocalization of V─O─V near the vacancy and enhances the redox properties due to the formation of in-gap states. Further, it is reported that a O─V2O5@ 500 ||PVA-KOH|| Bi2O3 A-650 thin film supercapbattery (TFSCB) device attains an exceptional discharge volumetric capacitance of 182.85 F cm-3 (equal volumetric capacity of 124.5 mAh cm-3). Furthermore, the TFSCB device exhibits an extraordinary maximum volumetric energy (power) density of 14.28 mWh cm-3 (1.66 W cm-3); TFSCB succeeds in supreme capacity retention of 86% with outstanding coulombic efficiency of 94.4% after 21 000 cycles.

Core-Shell CoS2@MoS2 with Hollow Heterostructure as an Efficient Electrocatalyst for Boosting Oxygen Evolution Reaction

It is imperative to develop an efficient catalyst to reduce the energy barrier of electrochemical water decomposition. In this study, a well-designed electrocatalyst featuring a core-shell structure was synthesized with cobalt sulfides as the core and molybdenum disulfide nanosheets as the shell. The core-shell structure can prevent the agglomeration of MoS2, expose more active sites, and facilitate electrolyte ion diffusion. A CoS2/MoS2 heterostructure is formed between CoS2 and MoS2 through the chemical interaction, and the surface chemistry is adjusted. Due to the morphological merits and the formation of the CoS2/MoS2 heterostructure, CoS2@MoS2 exhibits excellent electrocatalytic performance during the oxygen evolution reaction (OER) process in an alkaline electrolyte. To reach the current density of 10 mA cm-2, only 254 mV of overpotential is required for CoS2@MoS2, which is smaller than that of pristine CoS2 and MoS2. Meanwhile, the small Tafel slope (86.9 mV dec-1) and low charge transfer resistance (47 Ω) imply the fast dynamic mechanism of CoS2@MoS2. As further confirmed by cyclic voltammetry curves for 1000 cycles and the CA test for 10 h, CoS2@MoS2 shows exceptional catalytic stability. This work gives a guideline for constructing the core-shell heterostructure as an efficient catalyst for oxygen evolution reaction.

Modulating Electronic Structures of Bimetallic Co-Fe Sulfide Ultrathin Nanosheet Supported on g-C3N4 Promoting Electrocatalytic Hydrogen Evolution Performance

Heteroatom doping is a possible way to regulate the catalytic capability of electrocatalysts for hydrogen evolution reaction (HER). This work focuses on the development of bimetallic Cobalt-Iron sulfide ultrathin nanosheets supported on the graphitic carbon nitride (g-C3N4) catalyst as efficient HER electrocatalysts (CoS2/FeS2/CN) with good stability at wide pH value. The ultrathin nanosheet exposes more active sites and enhances the catalyst activity. Electrochemical experiments demonstrate that adding g-C3N4 and Fe to CoS2 increases its catalytic activity and stability. Furthermore, g-C3N4 and Fe co-doped with CoS2 can modulate electronic structures on the interface. The CoS2/FeS2/CN exhibits outstanding HER performance, reaching a current density of 10 mA cm-2 with overpotentials of only 76.5 mV in an acidic solution and 175.6 mV in an alkaline solution. It also demonstrates exceptional durability, superior to commercial platinum/carbon catalysts. This work introduces a promising approach for designing low-cost, high-performance HER electrocatalysts with a wide pH range.

Constructing an efficient electrocatalyst for water oxidation: an Fe-doped CoO/Co catalyst enabled by in situ MOF growth and a solvent-free strategy

The development of non-precious metal electrocatalysts with high activity for the oxygen evolution reaction (OER) is a crucial and challenging task. In this work, we proposed a solvent-free in situ metal-organic framework (MOF) growth strategy for the fabrication of an Fe-doped CoO/Co electrocatalyst. This approach not only partially granted the MOF's porous structure to the catalyst but also resulted in a tighter combination between the Co metal and CoO, thereby enhancing its electrical conductivity. Furthermore, this method enabled the Fe species to be more uniformly dispersed on CoO/Co, which significantly exposed more active sites for efficient electrocatalysis. The entire synthesis process was solvent-free, except for a small amount of water and ethanol used during catalyst washing. The as-synthesized Fe-CoO/Co electrocatalyst exhibited superior OER activity on a glass carbon electrode, with η = 276 mV at a current density of 10 mA cm-2, even higher than that of the commercial precious IrO2/C catalyst. Additionally, it was also extended to prepare a Ni-doped CoO/Co electrocatalyst by the same procedure with satisfactory OER performance. This work presents a new preparation approach for MOF-derived catalysts with potential applications in energy conversion and beyond.

Suppressing the Surface Amorphization of Ba0.5Sr0.5Co0.8Fe0.2O3-δ Perovskite toward Oxygen Catalytic Reactions by Introducing the Compressive Stress

Ba_0.5Sr_0.5Co_0.8Fe_0.2O_3-δ (BSCF) perovskite has been recognized as a promising oxygen evolution reaction (OER) catalyst due to its superior intrinsic catalytic activity. However, BSCF suffers from serious degradation during the OER process due to its surface amorphization caused by the segregation of A-site ions (Ba²⁺ and Sr²⁺). Herein, we construct a novel BSCF composite catalyst (BSCF-GDC-NR) by anchoring the gadolinium-doped ceria oxide (GDC) nanoparticles on the surface of a BSCF nanorod by a concentration-difference electrospinning method. Our BSCF-GDC-NR has greatly improved bifunctional oxygen catalytic activity and stability toward both oxygen reduction reaction (ORR) and OER compared with the pristine BSCF. The improvement of the stability can be related to that anchoring GDC on BSCF effectively suppresses the segregation and dissolution of A-site elements in BSCF during the preparation and catalytic processes. The suppression effects are ascribed to the introduction of compressive stress between BSCF and GDC, which greatly inhibits the diffusions of Ba and Sr ions. This work can give a guidance for developing the perovskite oxygen catalysts with high activity and stability.

Coupling Transition Metal Compound with Single-Atom Site for Water Splitting Electrocatalysis

Single-atom site catalysts (SACs) provide an ideal platform to identify the active centers, explore the catalytic mechanism, and establish the structure-property relationships, and thus have attracted increasing interests for electrocatalytic energy conversion. Substantial endeavors have been devoted to the construction of carbon-supported SACs, and their progress have been comprehensively reviewed. Compared with carbon-supported SACs, transition metal compounds (TMCs)-supported SACs are still in their infancy in the field of electrocatalysis. However, they have also aroused ever-increasing attention for driving electrocatalytic water splitting, and emerged as an indispensable class of SACs in recent years, predominately owing to their inherently structural features, such as rich anchoring sites, surface defects, and lattice vacancy. Herein, in this review, we have systematically summarized the recent advances of a variety of TMC supported SACs toward electrocatalytic water splitting. The advanced characterization techniques and theoretical analyses for identifying and monitoring the atomic structure of SACs are firstly manifested. Subsequently, the anchoring and stabilization mechanisms for TMC supported SACs are also highlighted. Thereafter, the advances of TMC supported SACs for driving water electrolysis are systematically unraveled.

Electrochromic Performance of Sputtered NbTi-Based Mixed Metal Oxide Thin Films with a Metallic Seed Layer

An attempt has been made to promote the efficiency of the electrochromic (EC) windows to perform at a faster switching rate with good coloration and easy recyclability. In this work, ion-assisted pulsed DC unbalanced confocal magnetron sputtering is used to fabricate mixed metal oxide thin films of Nb and Ti (which are termed as NTO) for EC applications. Further, to increase the EC efficiency of this film, a very thin metallic seed layer is incorporated between the substrate and the film using the layer-by-layer (LBL) coating strategy. The film was prepared by two steps: (i) very thin metallic seed layer coating and (ii) mixed metal oxide NTO layer coating. The metal layer was made of a Nb metal, Ti metal, and NbTi mixed metal, which was coated with the substrate and NTO layer, resulting in three different films, namely, Nb-NTO, Ti-NTO, and NbTi-NTO. The EC properties of these three films were studied in 1 M LiClO₄ dissolved in propylene carbonate and compared with the as-prepared NTO film. The results showed that the Nb-NTO film showed better EC properties, fast switching, better stability, and good recyclability. To check the stability, the film was subjected to prolonged cycling of 500 cycles with a harsh anodic and cathodic sweep at the scan rate of 100 mV s^-1. The UV-Vis spectrum confirmed the Li⁺ trapping in the films after prolonged cycling. To detrap the ions from the host surface, galvanostatic detrapping is carried out called rejuvenation studies. The rejuvenation rate of films is studied at a constant current loading of ∼2 × 10^-5 A cm^-2. To check the commercialization of the EC window, we successfully fabricated the Nb-NTO device with a PEO-LiClO₄-based polymer gel electrolyte.

Coupling Transition Metal Catalysts with Ir for Enhanced Electrochemical Water Splitting Activity

Developing advanced electrocatalysts is of great significance for boosting electrochemical water splitting to produce hydrogen. The electrocatalytic activity of a catalyst is associated with the surface/interface, geometric structure, and electronic properties. Coupling Ir with transition metal compounds is an effective strategy to improve their electrocatalytic performance. In this review, we summarize the recent progress of Ir coupled transition metal compound catalysts for the application in driving electrochemical water splitting. The significant role of Ir played in the promotion of electrocatalytic performance is firstly illustrated. Then, the applications of Ir-based catalysts in the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) are comprehensively discussed, with an emphasis on correlating the structure-function relationships. Lastly, the challenges and future directions for the fabrication of more advanced Ir coupled electrocatalysts are also presented.