Fluorinated Cerium(IV) Enaminolates: Alternative Precursors for Chemical Vapor Deposition of CeO2 Thin Films

Volatile lanthanide complexes with fluorinated heptadentate ligands

Understanding factors that influence the volatility of lanthanide complexes remains an important goal for applications such as gas-phase f-metal separations and the synthesis of lanthanide-containing thin films. Lanthanide complexes often exhibit volatility differences that depend on the ability of ligands to saturate the lanthanide coordination sphere and attenuate intermolecular bonding in the solid state. This can make it difficult to assess how electronic factors associated with differing ligand substituents influence volatility. Here we describe the synthesis, structures, and thermal properties of a series of volatile lanthanide complexes (Ln = Nd, Er, and Yb) containing N4O3 ligands decorated with different alkyl and fluoroalkyl substituents (CF3, CF2CF2CF3, Me, and tBu). These ligands completely enveloped the tested lanthanides to form monomeric complexes with 7-coordinate distorted capped octahedral coordination geometries, as determined using single-crystal X-ray diffraction. Thermogravimetric analysis and bulk sublimation studies show how metal encapsulation affords complexes with the same volatility regardless of metal size, even with lanthanide ions with significantly different radii such as Nd3+ and Yb3+. Most notably, the results show that increasing ligand fluorination, a strategy often used to increase the volatility of metal complexes, is not always beneficial and can significantly attenuate the volatility of lanthanide complexes depending on location with respect to other substituents in the ligand framework. A pair-wise model based on density functional theory shows that the net intermolecular interactions in the unit cell can still be stronger when fluorination is present. In other words, even if individual interactions between neighboring molecules are weaker, the total number of interactions in the solid arising from the nature of crystal packing is equally important to consider.

Undirected C-H Bond Activation in Aluminium Hydrido Enaminonates

Two new aluminium hydrido complexes were synthesized by reacting AlH₃ with the enaminone ligand N-(4,4,4-trifluorobut-1-en-3-on)-6,6,6-trifluoroethylamine (HTFB-TFEA) in different molar ratios to obtain mono- and di-hydrido-aluminium enaminonates. Both air and moisture sensitive compounds could be purified via sublimation under reduced pressure. The spectroscopic analysis and structural motif of the monohydrido compound [H-Al(TFB-TBA)₂] (3) showed a monomeric 5-coordinated Al(III) centre bearing two chelating enaminone units and a terminal hydride ligand. However, the dihydrido compound exhibited a rapid C-H bond activation and C-C bond formation in the resulting compound [(Al-TFB-TBA)-HCH2] (4a), which was confirmed by single crystal structural data. The intramolecular hydride shift involving the migration of a hydride ligand from aluminium centre to the alkenyl carbon of the enaminone ligand was probed and verified by multi-nuclear spectral studies (¹H,¹H NOESY, 13C, ¹⁹F, and ²⁷Al NMR).

Vapor Phase Synthesis of SnS Facilitated by Ligand-Driven "Launch Vehicle" Effect in Tin Precursors

Extraordinary low-temperature vapor-phase synthesis of SnS thin films from single molecular precursors is attractive over conventional high-temperature solid-state methods. Molecular-level processing of functional materials is accompanied by several intrinsic advantages such as precise control over stoichiometry, phase selective synthesis, and uniform substrate coverage. We report here on the synthesis of a new heteroleptic molecular precursor containing (i) a thiolate ligand forming a direct Sn-S bond, and (ii) a chelating O^N^N-donor ligand introducing a "launch vehicle"-effect into the synthesized compound, thus remarkably increasing its volatility. The newly synthesized tin compound [Sn(SBut)(tfb-dmeda)] 1 was characterized by single-crystal X-ray diffraction analysis that verified the desired Sn:S ratio in the molecule, which was demonstrated in the direct conversion of the molecular complex into SnS thin films. The multi-nuclei (1H, 13C, 19F, and 119Sn) and variable-temperature 1D and 2D NMR studies indicate retention of the overall solid-state structure of 1 in the solution and suggest the presence of a dynamic conformational equilibrium. The fragmentation behavior of 1 was analyzed by mass spectrometry and compared with those of homoleptic tin tertiary butyl thiolates [Sn(SBut)2] and [Sn(SBut)4]. The precursor 1 was then used to deposit SnS thin films on different substrates (FTO, Mo-coated soda-lime glass) by CVD and film growth rates at different temperatures (300-450 °C) and times (15-60 min), film thickness, crystalline quality, and surface morphology were investigated.

Molecular Level Synthesis of InFeO3 and InFeO3/Fe2O3 Nanocomposites

New heterometallic In-Fe alkoxides [InFe(O^tBu)₄(PyTFP)₂] (1), [InFe₂(O^neoPen)₉(Py)] (2), and [InFe₃(O^neoPen)₁₂] (3) were synthesized and structurally characterized. The arrangement of metal centers in mixed-metal framework was governed by the In:Fe ratio and the coordination preferences of Fe(III) and In(III) centers to be in tetrahedral and octahedral environments, respectively. 3 displayed a star-shaped so-called "Mitsubishi" motif with the central In atom coordinated with three tetrahedral {Fe(O^neoPen)₄}^- anionic units. The deterministic structural influence of the larger In atom was evident in 1 and 2 which displayed the coordination of neutral coligands to achieve the desired coordination number. Thermal decomposition studies of compounds 1-3 under inert conditions with subsequent powder diffraction studies revealed the formation of Fe₂O₃ and In₂O₃ in the case of 3 and 2, whereas 1 intriguingly produced elemental In and Fe. In contrary, the thermal decomposition of 1-3 under ambient conditions produced a ternary oxide, InFeO₃, with additional Fe₂O₃ present as a secondary phase in a different stoichiometric ratio predetermined through the In:Fe ratio in 2 and 3. The intimate mixing of different phases in InFeO₃/Fe₂O₃ nanocomposites was confirmed by transmission electron microscopy of solid residues obtained after the decomposition of 1 and 2. The pure InFeO₃ particles demonstrated ferromagnetic anomalies around 170 K as determined by temperature-dependent field-cooled and zero-field-cooled magnetization experiments. A first-order magnetic transition with an increase in the ZFC measurements was explained by temperature-induced reduction of the Fe-Fe distance and the corresponding increase in superexchange.

Oxidizing Cerium(IV) Alkoxide Complexes Supported by the Kläui Ligand [Co(η5-C5H5){P(O)(OEt)2}3]-: Synthesis, Structure, and Redox Reactivity

Tetravalent cerium alkoxide complexes supported by the Kläui tripodal ligand [Co(η⁵-C₅H₅){P(O)(OEt)₂}₃]^- (L_OEt^-) have been synthesized, and their nucleophilic and redox reactivity have been studied. Treatment of the Ce(IV) oxo complex [Ce^IV(L_OEt)₂(O)(H₂O)]·MeCONH₂ (1) with ⁱPrOH or reaction of [Ce^IV(L_OEt)₂Cl₂] (2) with Ag₂O in ⁱPrOH afforded the Ce(IV) dialkoxide complex [Ce^IV(L_OEt)₂(OⁱPr)₂] (3-iPr). The methoxide and ethoxide analogues [Ce^IV(L_OEt)₂(OR)₂] (R = Me (3-Me), Et (3-Et)) have been prepared similarly from 2 and Ag₂O in ROH. Reaction of 3-iPr with an equimolar amount of 2 yielded a new Ce(IV) complex that was formulated as the chloro-alkoxide complex [Ce^IV(L_OEt)₂(OⁱPr)Cl] (4). Treatment of 3-iPr with HX and methyl triflate (MeOTf) afforded [Ce(L_OEt)₂X₂] (X^- = Cl^-, NO₃^-, PhO^-) and [Ce^IV(L_OEt)₂(OTf)₂], respectively, whereas treatment with excess CO₂ in hexane led to isolation of the Ce(IV) carbonate [Ce^IV(L_OEt)₂(CO₃)]. 3-iPr reacted with water in hexane to give a Ce(III) complex and a Ce(IV) species, presumably the reported tetranuclear oxo cluster [Ce^IV₄(L_OEt)₄(O)₅(OH)₂]. The Ce(IV) alkoxide complexes are capable of oxidizing substituted phenols, possibly via a proton-coupled electron transfer pathway. Treatment of 3-iPr with ArOH afforded the Ce(III) aryloxide complexes [Ce^III(L_OEt)₂(OAr)] (Ar = 2,4,6-tri-tert-butylphenyl (5), 2,6-diphenylphenyl (6)). On the other hand, a Ce(III) complex containing a monodeprotonated 2,2'-biphenol ligand, [Ce^III(L_OEt)₂(^tBu₄C₁₂H₄O₂H)] (7) (^tBu₄C₁₂H₄O₂H₂ = 4,4',6,6'-tetra-tert-butyl-2,2'-biphenol), was isolated from the reaction of 3-iPr with 2,4-di-tert-butylphenol. The crystal structures of complexes 3-iPr, 3-Me, 3-Et, and 5-7 have been determined.

Nanostructured IrOx Coatings for Efficient Oxygen Evolution Reactions in PV-EC Setup

New heteroleptic iridium compounds exhibiting high volatility and defined thermal decomposition behavior were developed and tested in plasma-enhanced chemical vapor deposition (PECVD). The iridium precursor [(COD)Ir(TFB-TFEA)] (COD = 1,5-cyclooctadiene; TFB-TFEA = N-(4,4,4-Trifluorobut-1-en-3-on)-6,6,6-trifluoroethylamin) unifies both reactivity and sufficient stability through its heteroleptic constitution to offer a step-by-step elimination of ligands to provide high compositional purity in CVD deposits. The substitution of neutral COD ligands against CO groups further increased the volatility of the precursor. PECVD experiments with unambiguously characterized Ir compounds (single crystal X-ray diffraction analysis) demonstrated their suitability for an atom-efficient (high molecule-to-precursor yield) gas phase deposition of amorphous iridium oxide (IrOx) phases. Thin films of IrOx were well suited as electrocatalyst in oxygen evolution reaction so that an efficient coupled system in combination with solar cells is viable to perform water-splitting reaction without external bias.