Ligand-to-Ligand Charge Transfer within Metal–Organic Frameworks Based on Manganese Coordination Polymers with Tetrathiafulvalene-Bicarboxylate and Bipyridine Ligands

Square-planar Tetranuclear Cluster-based Alkaline Earth Metal-organic Frameworks with Enhanced Proton Conductivity

Alkaline earth (AE) metal complexes have garnered significant interest in various functional fields due to their nontoxicity, low density, and low cost. However, there is a lack of systematic investigation into the structural characteristics and physical properties of AE-metal-organic frameworks (MOFs). In this research, we synthesized isostructural MOFs consisting of AE4(μ4-Cl) clusters bridged by benzo-(1,2;3,4;5,6)-tris(thiophene-2'-carboxylic acid) (BTTC3-) ligands. The resulting structure forms a truncated octahedral cage denoted as [AE4(m4-Cl)]6(BTTC)8, which further linked to a porous three-dimensional framework. Among the investigated AE ions (Ca, Sr, and Ba), the Ca4-MOF demonstrated good chemical stability in water compared to Sr4-MOF and Ba4-MOF. The N2 adsorption and solid-state UV-vis-NIR absorption behaviors were evaluated for all AE4-MOFs, showing similar trends among the different metal ions. Additionally, the proton conduction study revealed that the Ca4-MOF exhibited ultra-high proton conductivity, reaching 3.52×10-2 S cm-1 at 343 K and 98 % RH. Notably, the introduction of LiCl via guest exchange resulted in an improved proton conduction of up to 6.36×10-2 S cm-1 under similar conditions in the modified LiCl@Ca4-MOF. The findings shed light on the regulation of physical properties and proton conductivity of AE-MOFs, providing valuable insights for their potential applications in various fields.

Fluorescence detection platform of metal-organic frameworks for biomarkers

Sensitive and selective detection of biomarkers is crucial in the study and early diagnosis of diseases. With the continuous development of biosensing technologies, fluorescent biosensors based on metal-organic frameworks have attracted increasing attention in the field of biomarker detection due to the combination of the advantages of MOFs, such as high specific surface area, large porosity, and structure with tunable functionality and the technical simplicity, sensitivity and efficiency and good applicability of fluorescent detection techniques. Therefore, researchers must understand the fluorescence response mechanism of such fluorescent biosensors and their specific applications in this field. Of all biomarkers applicable to such sensors, the chemical essence of nucleic acids, proteins, amino acids, dopamine, and other small molecules account for about a quarter of the total number of studies. This review systematically elaborates on four fluorescence response mechanisms: metal-centered emission (MC), ligand-centered emission (LC), charge transfer (CT), and guest-induced luminescence change (GI), presenting their applications in the detection of nucleic acids, proteins, amino acids, dopamine, and other small molecule biomarkers. In addition, the current challenges of MOFs-based fluorescent biosensors are also discussed, and their further development prospects are concerned.

Magnetoelectric effect generated through electron transfer from organic radical to metal ion

Magnetoelectric (ME) materials induced by electron transfer are extremely rare. Electron transfer in these materials invariably occurs between the metal ions. In contrast, ME properties induced by electron transfer from an organic radical to a metal ion have never been observed. Here, we report the ME coupling effect in a mononuclear molecule-based compound [(CH₃)₃NCH₂CH₂Br][Fe(Cl₂An)₂(H₂O)₂] (1) [Cl₂An = chloranilate, (CH₃)₃NCH₂CH₂Br⁺ = (2-bromoethyl)trimethylammonium]. Investigation of the mechanism revealed that the ME coupling effect is realized through electron transfer from the Cl₂An to the Fe ion. Measurement of the magnetodielectric (MD) coefficient of 1 indicated a positive MD of up to ∼12% at 10^3.0 Hz and 370 K, which is very different from that of ME materials with conventional electron transfer for which the MD is generally negative. Thus, the current work not only presents a novel ME coupling mechanism, but also opens a new route to the synthesis of ME coupling materials.

Inter-Network Charge-Transfer Excited State Formation Within a Two-fold Catenated Metal-Organic Framework

Charge-transfer excited state (CTES) defines the ability to split photon energy into work producing redox equivalents suitable for photocatalysis. Here, we report inter-net CTES formation within a two-fold catenated crystalline metal-organic framework (MOF), constructed with two linkers, N,N'-di(4-pyridyl)-1,4,5,8-naphthalenetetracarboxydiimide (DPNDI) and 2,6-dicarboxynaphthalene (NDC). The structural flexibility puts two complementary linkers from two nets in a proximal position to interact strongly. Supported by the electrochemical and steady-state electronic spectroscopic data, this ground-state interaction facilitates forming CTES that can be populated by direct excitation. We map the dynamics of the CTES which persists over a few nanoseconds and highlight the utilities of such relatively long-lived CTES as enhanced conductivity of the MOF under light over that measured in dark and as a proof-of-the-principle test, photo-reduction of methyl viologen under white light.

Redox-Active Metal-Organic Frameworks with Three-Dimensional Lattice Containing the m-Tetrathiafulvalene-Tetrabenzoate

Metal-organic frameworks (MOFs) constructed by tetrathiafulvalene-tetrabenzoate (H₄TTFTB) have been widely studied in porous materials, while the studies of other TTFTB derivatives are rare. Herein, the meta derivative of the frequently used p-H₄TTFTB ligand, m-H₄TTFTB, and lanthanide (Ln) metal ions (Tb³⁺, Er³⁺, and Gd³⁺) were assembled into three novel MOFs. Compared with the reported porous Ln-TTFTB, the resulted three-dimensional frameworks, Ln-m-TTFTB ([Ln₂(m-TTFTB)(m-H₂TTFTB)_0.5(HCOO)(DMF)]·2DMF·3H₂O), possess a more dense stacking which leads to scarce porosity. The solid-state cyclic voltammetry studies revealed that these MOFs show similar redox activity with two reversible one-electron processes at 0.21 and 0.48 V (vs. Fc/Fc⁺). The results of magnetic properties suggested Dy-m-TTFTB and Er-m-TTFTB exhibit slow relaxation of the magnetization. Porosity was not found in these materials, which is probably due to the meta-configuration of the m-TTFTB ligand that seems to hinder the formation of pores. However, the m-TTFTB ligand has shown to be promising to construct redox-active or electrically conductive MOFs in future work.

Improved Effect of Metal Coordination on Molecular Oxygen Activation for Selective Aerobic Photooxidation

A pyridinium-based complex with environment-friendly and earth-abundant Zn^II ion was synthesized and explored as a green catalyst applied in activating molecular oxygen for the simple and efficient photooxidation of alcohols into aldehydes under additive-free and mild conditions. The metal coordination was conducive to promoting the electron transfer efficiency and introducing the heavy-atom effect for the increased generation of ⋅O₂ ^- and ¹ O₂ . Accordingly, improved photocatalytic performance of this complex compared to its precursor, no matter activity or selectivity, was obtained, facilitating the transformation of alcohols into aldehydes in a sustainable way.

Information encryption, highly sensitive detection of nitrobenzene, tetracycline based on a stable luminescent Cd-MOF

A stable luminescent Cd-MOF, formulated as [Cd(L)_0.5(4, 4'-bpy)_0.5]·H₂O (1), (H₄L = 1, 1'-ethylbiphenyl -3, 3', 5, 5'- tetracarboxylic acid, 4, 4' -bpy = 4, 4'-bipyridine), is acquired under solvothermal conditions. 1 exhibits stability in the pH range from 1.5 to 12.2 and in different organic solvents. 1 can detect tetracycline and nitrobenzene by fluorescence quenching with high sensitivity and selectivity. The detection limits are 0.14 μM and 14 nM, respectively. Interestingly, 1 can encapsulate Tb³⁺ and sensitize its characteristic peaks. Moreover, the fluorescent ink is prepared by using the luminescent properties of the Tb³⁺@Cd-MOF. The light of the fluorescent ink disappears in an acid gas HCl atmosphere and then reappears in an alkaline gas ammonia atmosphere. This phenomenon can be repeated and the reason for this phenomenon is also explained in the article. Therefore, Tb³⁺@Cd-MOF has huge application potential in information encryption.

Copper-bipyridine grid frameworks incorporating redox-active tetrathiafulvalene: structures and supercapacitance

Redox active tetrathiafulvalene (TTF) and its derivatives when used as electrode additives have exhibited improved energy efficiency and sustainability in batteries. However, the structure-property relationship has not been investigated in detail until very recently. In this work, three redox-active TTF compounds were synthesized, and formulated as [Cu(HL)₂(bpa)₂]_n (1), [Cu(bpe)₂(H₂O)₂]_n·2n(HL)·nMeOH·nH₂O (2), and [Cu(bpp)₂(H₂O)₂]_n·2n(HL) (3) (L = dimethylthio-tetrathiafulvalene-bicarboxylate) for this work. The effects of conjugated state and spacer length of the linkers on structural assembly and band gap as well as the interactions of TTF-TTF/TTF-bpy are discussed. Compound 1 is a bpa and HL co-coordinated 1D Cu(ii) polymer. Compounds 2 and 3 are 2D Cu(ii)-bipyridine (4,4) MOFs incorporating HL (1^-) as free anion columns. The photocurrent density of 2 is larger than those of 1 and 3 due to a strong charge transfer from TTF to bpe in compound 2. The supercapacitance performances of these compounds were evaluated by cyclic voltammetry (CV) and galvanostatic charge-discharge (GCD) techniques. The results revealed that the 2D MOF structures of 2 and 3 are beneficial for good specific capacitance values (C_sp). This work revealed the structure-property relationships of TTF derivatives for use as electrode active materials in energy transfer and storage.

Recent progresses in luminescent metal-organic frameworks (LMOFs) as sensors for the detection of anions and cations in aqueous solution

The discharge of excessive metal ions and anions into water bodies leads to the serious pollution of water and environment, which in turn has a certain impact on industry, agriculture, and human life. Because of the unique advantages of luminescent metal-organic frameworks (LMOFs), they have been successfully explored as various fluorescent probes to quickly and effectively detect these pollutants. This perspective not only introduces the design strategy and classification of LMOFs, especially the construction methods of water-stable LMOFs, but also reports the latest progresses in some LMOFs between 2016 and 2020 as well as expounds the mechanisms of LMOFs for detecting anions and cations. Moreover, the luminescence properties of LMOFs are related to the selection of metal ions, the structure of organic ligands, the pore size, and the interaction of guest molecules. Finally, the further development of LMOFs is summarized and prospected in this field.

Cobalt Metal-Organic Framework Based on Layered Double Nanosheets for Enhanced Electrocatalytic Water Oxidation in Neutral Media

A new cobalt metal-organic framework (2D-Co-MOF) based on well-defined layered double cores that are strongly connected by intermolecular bonds has been developed. Its 3D structure is held together by π-π stacking interactions between the labile pyridine ligands of the nanosheets. In aqueous solution, the axial pyridine ligands are exchanged by water molecules, producing a delamination of the material, where the individual double nanosheets preserve their structure. The original 3D layered structure can be restored by a solvothermal process with pyridine, so that the material shows a "memory effect" during the delamination-pillarization process. Electrochemical activation of a 2D-Co-MOF@Nafion-modified graphite electrode in aqueous solution improves the ionic migration and electron transfer across the film and promotes the formation of the electrocatalytically active cobalt species for the oxygen evolution reaction (OER). The so-activated 2D-Co-MOF@Nafion composite exhibits an outstanding electrocatalytic performance for the OER at neutral pH, with a TOF value (0.034 s^-1 at an overpotential of 400 mV) and robustness superior to those reported for similar electrocatalysts under similar conditions. The particular topology of the delaminated nanosheets, with quite distant cobalt centers, precludes the direct coupling between the electrocatalytically active centers of the same sheet. On the other hand, the increase in ionic migration across the film during the electrochemical activation stage rules out the intersheet coupling between active cobalt centers, as this scenario would impair electrolyte permeation. Altogether, the most plausible mechanism for the O-O bond formation is the water nucleophilic attack to single Co(IV)-oxo or Co(III)-oxyl centers. Its high electrochemical efficiency suggests that the presence of nitrogen-containing aromatic equatorial ligands facilitates the water nucleophilic attack, as in the case of the highly efficient cobalt porphyrins.

Cobalt Metal-Organic Frameworks Incorporating Redox-Active Tetrathiafulvalene Ligand: Structures and Effect of LLCT within the MOF on Photoelectrochemical Properties

Understanding the effect of charge transfer on the physical properties of metal-organic frameworks (MOFs) is essential for designing multifunctional MOF materials. In this work, three redox-active tetrathiafulvalene (TTF)-based MOFs, formulated as [Co₆L₆(bpe)₆(EtOH)₂(MeOH)₂(H₂O)]_n·5nH₂O (1), [Co₅(μ₃-OH)₂L₄(bpe)₂]_n (2), and [CoL(bpa)(H₂O)]_n·2nH₂O (3) (L = dimethylthio-tetrathiafulvalene-bicarboxylate, bpe = 1,2-bis(4-pyridyl)ethene, bpa = 1,2-bis(4-pyridyl)ethane), are crystallographically characterized. Complexes 1 and 3 are two-dimensional (2D) coordination polymers, and 2 features an unusual three-dimensional (3D) MOF. The structure of 2 contains a cluster chain constructed from μ₂-O bridged pentanuclear cluster subunits, which is first found for 3D MOFs. Complexes 1 and 2 are comprised of the same ligands L and bpe but with different multidimensional configuration, and complexes 1 and 3 have the same 2D layered structures with the same ligand L but with different conjugation ligand bpe/bpa, which provide a good comparison for the structure-property relationship. The charge-transfer (CT) interactions within MOF 1 are stronger than those of 2 due to the closer packing of electron donor (D) L and electron acceptor (A) bpe in 1, and no CT occurs within MOF 3 because of the unconjugated bpa. The order of photocurrent density is 1 > 2 ≫ 3, which is in accordance with that of CT interactions. Further analysis reveals that the CT interactions within the MOF are not beneficial for the supercapacitance which is verified by the highest supercapacitance performance of 3. This work is the first study of the structures and CT effects on the supercapacitance performance.

Tuned Hydrogen Bonding in Rare-Earth Metal-Organic Frameworks for Design of Optical and Electronic Properties: An Exemplar Study of Y-2,5-Dihydroxyterephthalic Acid

Organic linkers in metal-organic framework (MOF) materials exhibit differences in hydrogen bonding (H-bonding), which can alter the geometric, electronic, and optical properties of the MOF. Density functional theory (DFT) simulations were performed on a photoluminescent Y-2,5-dihydroxyterephthalic acid (DOBDC) MOF with H-bonding concentrations between 0 and 100%; the H-bonds were located on both bidentate- and monodentate-bound DOBDC linkers. At 0% H-bond concentration in the framework, the lattice parameters contracted, the density increased, and simulated X-ray diffraction patterns shifted. Comparison with published experimental data identified that Y-DOBDC MOF structures must have a degree of H-bond concentration. The concentration of H-bonds in the system shifted the calculated band gap energy from 2.25 eV at 100% to 3.00 eV at 0%. The band gap energies also indicate a distinction of H-bonds formed on bidentate-coordinated linkers compared to those on monodentate linkers. Additionally, when the calculated optical spectra are compared with experimental data, the ligand-to-ligand charge-transfer luminescence in Y-DOBDC MOFs is expected to result from an average of 20-40% H-bonding with at least 50% of the bidentate linkers containing H-bonding. Therefore, the type of H-bonding within the DOBDC linker determines the electronic structure and the optical absorption of the MOF framework structure. Tuning of the H-bonding in rare-earth MOFs provides an opportunity to control the specific optical and adsorption properties of the MOF framework on the basis of reactions between the linker and the environment.

Light-mediated olefin coordination polymerization and photoswitches

This review outlines photoswitchable, transition metal-based olefin coordination polymerization catalysts ranging from homogeneous to heterogeneous, and monometallic to bimetallic regimes.

The role of photoinduced charge transfer for photocatalysis, photoelectrocatalysis and luminescence sensing in metal–organic frameworks

Understanding PCT taking place within MOFs is crucial for designing porous photo/electrocatalysts and luminescent sensors. Unique features of PCT in MOFs and recent progress along with state-of-the-art characterization methods are discussed in the context of its applications.

Concomitant Use of Tetrathiafulvalene and 7,7,8,8-Tetracyanoquinodimethane within the Skeletons of Metal-Organic Frameworks: Structures, Magnetism, and Electrochemistry

In search of multifunctional metal-organic frameworks (MOFs), redox-active donors and acceptors, namely, tetrathiafulvalene (TTF) and 7,7,8,8-tetracyanoquinodimethane (TCNQ), were concomitantly used as skeletal components with diamagnetic metal nodes (Cd and Zn) to construct unique framework materials. Six isostructural frameworks were synthesized by diffusion of metal salts, TTF(py)₄, and either paramagnetic Li(TCNQ) or diamagnetic H₂TCNQ. They were characterized by single-crystal X-ray diffraction and FT-IR and UV-vis-NIR spectroscopy, and their physical properties were studied, including two postsynthetic modifications involving crystal-to-crystal transformations following a solid-solution reaction with I₂. The highly colored crystals of two isostructural Zn and Cd frameworks contain undulating Cd-TTF(py)₄ layers entwined with TCNQ in a chicken-wire net as part of the skeleton of the MOF as well as TCNQ intercalated within the channels, while nitrate anions are occluded within the cavities formed by the pyridine moieties. Reaction with I₂ replaces each intercalated TCNQ^•- within the channels with I₃^-. The optical properties and the electron paramagnetic resonance (EPR) spectra indicate the presence of only radical TCNQ^•- in the parent compounds, while the magnetic susceptibilities enabled an estimation of the amount of TCNQ^•- ( S = 1/2) leading to almost paramagnetic behavior. Solid-state electrochemistry provides evidence of several one-electron redox states corresponding to the electroactive cores.

Metal–organic insertion light initiated radical (MILRad) polymerization: photo-initiated radical polymerization of vinyl polar monomers with various palladium diimine catalysts

The photoinitiated radical polymerization pathway of MILRad polymerization towards its ability to polymerize a variety of vinyl polar functional monomers is investigated.

Tetrathiopyridyl-tetrathiafulvalene-based Cd(ii) coordination polymers: one ligand, one metal cation, many possibilities

A novel tetrathiafulvalene derivative bearing four 4-thiopyridyl units has been assembled with Cd(ii) salts for the construction of a series of coordination polymers with different structural organization depending on the ligand conformation.

Covalent linkage of [Mn2(μ-O2PPh2)2] units by trans-1,4-bis(4-pyridyl)ethene ligands into one-dimensional and two-dimensional polymers

Two coordination polymers, [Mn2(μ-O2PPh2)2(η 1-O2PPh2)2(η 1-HOCH3)2(μ-bpe)2·CH3OH] n (1) and [Mn2(μ-O2PPh2)4(μ-bpe)2] n (2), were assembled in single-pot reactions from [Mn(CH3COO)2·4H2O], Ph2P(O)OK and trans-1,4-bis(4-pyridyl)ethene (bpe). The products were characterized by single-crystal X-ray diffraction, which revealed a one-dimensional metal-organic ladder type in 1 and a two-dimensional rectangular grid type in 2. Both 1 and 2 are constructed from six-coordinate Mn(II) nodes that adopt distorted octahedral (MnN4O2) environments; the adjacent nodes are connected by the μ-bpe linkers in 1 or μ-bpe and μ-O2PPh2 linkers in 2 to form different metal-organic networks. The catalytic property of complex 1 for selective thioether oxidation was also investigated in this work.

Intracation and Interanion-Cation Charge-Transfer Properties of Tetrathiafulvalene-Bismuth-Halide Hybrids

Tetrathiafulvalene (TTF) derivatives as promising hole transport materials in assembling hybrid halide perovskite solar cells have attracted great attention; however, electron transfer or charge-transfer (CT) between TTF and metal halides has been studied with less detail at the molecular level. Using molecular models, we herein report four new TTF-bismuth-halides assembled by methylated or protonated bis(4'-pyridyl)-tetrathiafulvalene cations, (MePy)₂TTF or (HPy)₂TTF, and bismuth-halide anions. Single crystal analysis showed that the cations are stacked to form a TTF column, and the bismuth-halide anions are inlaid between the TTF columns with anion-cation interactions. In these compounds, the main contribution to CT is the intracation CT, namely intramolecular CT (IMCT) from TTF moiety to pyridinium group. However, the anion to cation CT (ACCT) has a significant effect on the IMCT and physical properties. The different anion-cation interaction modes result in different synergistic effects of IMCT and ACCT, which modified the band gaps and photocurrent properties of the hybrids. The research gives a clear image of structure-property relationship and provides a perspective on the design of new perovskite materials at the molecular level.

Coordination chemistry in the design of heterogeneous photocatalysts

Heterogeneous catalysts have been widely used for photocatalysis, which is a highly important process for energy conversion, owing to their merits such as easy separation of catalysts from the reaction products and applicability to continuous chemical industry and recyclability. Yet, homogenous photocatalysis receives tremendous attention as it can offer a higher activity and selectivity with atomically dispersed catalytic sites and tunable light absorption. For this reason, there is a major trend to combine the advantages of both homogeneous and heterogeneous photocatalysts, in which coordination chemistry plays a role as the bridge. In this article, we aim to provide the first systematic review to give a clear picture of the recent progress from taking advantage of coordination chemistry. We specifically summarize the role of coordination chemistry as a versatile tool to engineer catalytically active sites, tune light harvesting and maneuver charge kinetics in heterogeneous photocatalysis. We then elaborate on the common fundamentals behind various materials systems, together with key spectroscopic characterization techniques and remaining challenges in this field. The typical applications of coordination chemistry in heterogeneous photocatalysis, including proton reduction, water oxidation, carbon dioxide reduction and organic reactions, are highlighted.

Probing charge transfer characteristics in a donor–acceptor metal–organic framework by Raman spectroelectrochemistry and pressure-dependence studies

Donor–Acceptor Metal–Organic Frameworks display redox and pressure dependent charge transfer properties.

Exploring the electronic structure of aluminum metal–organic framework Basolite A100: solid-state synchronous fluorescence spectroscopy reveals new charge excitation/relaxation pathways

Solid-state synchronous fluorescence spectroscopy is superior to “conventional” fluorescence; it identifies absorption/emission by the linkers, bandgap and excimers in Al-MOF Basolite A100.

The role of redox hopping in metal–organic framework electrocatalysis

A perspective on redox hopping charge transport through metal organic frameworks and its role in driving efficient electrocatalysis.

Highly efficient electrochemiluminescence based on 4-amino-1,2,4-triazole Schiff base two-dimensional Zn/Cd coordination polymers

ComplexesHL1andHL2and1–4exhibit a stronger ECL emission and complexes1–4exhibit higher stability.

Confinement Effects of Metal-Organic Framework on the Formation of Charge-Transfer Tetrathiafulvalene Dimers

Three transition metal coordination polymers (CPs) based on the redox-active dimethylthio-tetrathiafulvalene-bicarboxylate (L) and 1,3-bi(4-pyridyl)propane (bpp) ligands, formulated as [MnL(bpp)]_n (1), [CdL(bpp)]_n (2), and [Cd₂L(bpp)₂(H₂O)(C₂O₄)_0.5]_n·n(ClO₄)·n(H₂O) (3), are crystallographically characterized. Complexes 1 and 2 are isostructural 2-D polymers, and 3 features an unusual 3-D metal-organic framework (MOF). The 3-D MOF is constructed from tetranuclear cluster nodes built through the μ₂-O bridge of the TTF ligand, which is first found for TTF coordination polymers. It is found that the channel generated by the 3-D MOF exerts a confinement effect on the formation of TTF dimers. The TTF dimers show strong intradimer interaction with partial electron transfer or charge transfer, and hence, the Cd compound 3 has relatively good photocurrent response property in comparison with that of 2-D Cd compound 2.

Copper-based energetic MOFs with 3-nitro-1H-1,2,4-triazole: solvent-dependent syntheses, structures and energetic performances

Three energetic compounds assembled with 3-nitro-1H-1,2,4-triazole have exemplified that coordinated solvent molecules may have a vital effect on the detonation properties.