Influence of Asymmetry on the Redox Properties of Phenoxo- and Hydroxo-Bridged Dicopper Complexes: Spectroelectrochemical and Theoretical Studies

Copper-oxygen adducts: new trends in characterization and properties towards C-H activation

This review summarizes the latest discoveries in the field of C-H activation by copper monoxygenases and more particularly by their bioinspired systems. This work first describes the recent background on copper-containing enzymes along with additional interpretations about the nature of the active copper-oxygen intermediates. It then focuses on relevant examples of bioinorganic synthetic copper-oxygen intermediates according to their nuclearity (mono to polynuclear). This includes a detailed description of the spectroscopic features of these adducts as well as their reactivity towards the oxidation of recalcitrant Csp3 -H bonds. The last part is devoted to the significant expansion of heterogeneous catalytic systems based on copper-oxygen cores (i.e. within zeolite frameworks).

Coordination Variations within Binuclear Copper Dioxygen-Derived (Hydro)Peroxo and Superoxo Species; Influences upon Thermodynamic and Electronic Properties

Copper ion is a versatile and ubiquitous facilitator of redox chemical and biochemical processes. These include the binding of molecular oxygen to copper(I) complexes where it undergoes stepwise reduction-protonation. A detailed understanding of thermodynamic relationships between such reduced/protonated states is key to elucidate the fundamentals of the chemical/biochemical processes involved. The dicopper(I) complex [CuI2(BPMPO-)]1+ {BPMPOH = 2,6-bis{[(bis(2-pyridylmethyl)amino]methyl}-4-methylphenol)} undergoes cryogenic dioxygen addition; further manipulations in 2-methyltetrahydrofuran generate dicopper(II) peroxo [CuII2(BPMPO-)(O22-)]1+, hydroperoxo [CuII2(BPMPO-)(-OOH)]2+, and superoxo [CuII2(BPMPO-)(O2•-)]2+ species, characterized by UV-vis, resonance Raman and electron paramagnetic resonance (EPR) spectroscopies, and cold spray ionization mass spectrometry. An unexpected EPR spectrum for [CuII2(BPMPO-)(O2•-)]2+ is explained by the analysis of its exchange-coupled three-spin frustrated system and DFT calculations. A redox equilibrium, [CuII2(BPMPO-)(O22-)]1+ ⇄ [CuII2(BPMPO-)(O2•-)]2+, is established utilizing Me8Fc+/Cr(η6-C6H6)2, allowing for [CuII2(BPMPO-)(O2•-)]2+/[CuII2(BPMPO-)(O22-)]1+ reduction potential calculation, E°' = -0.44 ± 0.01 V vs Fc+/0, also confirmed by cryoelectrochemical measurements (E°' = -0.40 ± 0.01 V). 2,6-Lutidinium triflate addition to [CuII2(BPMPO-)(O22-)]1+ produces [CuII2(BPMPO-)(-OOH)]2+; using a phosphazene base, an acid-base equilibrium was achieved, pKa = 22.3 ± 0.7 for [CuII2(BPMPO-)(-OOH)]2+. The BDFEOO-H = 80.3 ± 1.2 kcal/mol, as calculated for [CuII2(BPMPO-)(-OOH)]2+; this is further substantiated by H atom abstraction from O-H substrates by [CuII2(BPMPO-)(O2•-)]2+ forming [CuII2(BPMPO-)(-OOH)]2+. In comparison to known analogues, the thermodynamic and spectroscopic properties of [CuII2(BPMPO-)] O2-derived adducts can be accounted for based on chelate ring size variations built into the BPMPO- framework and the resulting enhanced CuII-ion Lewis acidity.

Ancillary-Ligand-Assisted Variation in Nuclearities Leading to the Formation of Di-, Tri-, and Tetranuclear Copper(II) Complexes with Multifaceted Carboxylate Coordination Chemistry

The self-assembly of a carboxylate-based dinucleating ligand, N,N'-bis[2-carboxybenzomethyl]-N,N'-bis[2-pyridylmethyl]-1,3-diaminopropan-2-ol (H₃cpdp), and copper(II) ions in the presence of various exogenous ancillary ligands results in the formation of the new dinuclear complex [Cu₂(cpdp)(μ-Hisophth)]₄·2H₂isophth·21H₂O (1), trinuclear complex [Cu₃(Hcpdp)(Cl)₄] (2), and tetranuclear complex [Cu₄(cpdp)(μ-Hphth)(μ₄-phth)(piconol)(Cl)₂]·3H₂O (3) (H₂phth = phthalic acid; H₂isophth = isophthalic acid; piconol = 2-pyridinemethanol; Cl^- = chloride). In methanol-water, the reaction of H₃cpdp with CuCl₂·2H₂O at room temperature leads to the formation of 2. On the other hand, 1 and 3 have been obtained by carrying out the reaction of H₃cpdp with CuCl₂·2H₂O/m-C₆H₄(CO₂Na)₂ and CuCl₂·2H₂O/o-C₆H₄(CO₂Na)₂/piconol, respectively, in methanol-water in the presence of NaOH at ambient temperature. All three complexes have been characterized by elemental analysis, molar electrical conductivity and magnetic moment measurements, FTIR, UV-vis spectroscopy, and PXRD, including single-crystal X-ray structural analyses. The molecular structure of 1 is based on a μ-alkoxide and μ-isophthalate-bridged dimeric [Cu₂] core; the structure of 2 represents a trimeric [Cu₃] core in which a μ-alcohol-bridged dinuclear [Cu₂] unit is exclusively coupled with a [CuCl₂] species by two μ:η¹:η¹-syn-anti carboxylate groups forming a triangular motif; the structure of 3 embodies a tetrameric [Cu₄] core, with two copper(II) ions in a distorted-octahedral coordination environment, one copper(II) ion in a distorted-trigonal-bipyramidal coordination environment, and the other copper(II) ion in a square-planar coordination environment. In fact, 2 and 3 represent rare examples of copper(II)-based multinuclear complexes showing outstanding features of rich coordination chemistry: (i) using a symmetrical dinucleating ligand, trinuclear complex 2 is generated with four- and five-coordination environments around copper(II) ions; (ii) the unsymmetrical tetranuclear complex 3 is obtained by using the same ligand with four-, five- and six-coordination environments around copper(II) ions; (iii) tetracopper(II) complex 3 shows four different bridging modes of carboxylate groups simultaneously such as μ:η², μ:η¹:η¹, μ₃:η²:η¹:η¹, and μ₄:η¹:η¹:η¹:η¹, the μ₄:η¹:η¹:η¹:η¹ mode of phthalate being unprecedented. The formation of these [Cu₂], [Cu₃], and [Cu₄] complexes can be controlled by changing the exogenous ancillary ligands and pH of the reaction solutions, thus allowing an effective tuning of the self-assembly. The magnetic susceptibility measurements suggest that the copper centers in all three complexes are antiferromagnetically coupled. The thermal properties of 1-3 have been investigated by thermogravimetric and differential thermal analytical (TGA and DTA) techniques, indicating that the decomposition of all three complexes proceeds via multistep processes.

Experimental and Theoretical Studies of the Optical Properties of the Schiff Bases and Their Materials Obtained from o-Phenylenediamine

Two macrocyclic Schiff bases derived from o-phenylenediamine and 2-hydroxy-5-methylisophthalaldehyde L1 or 2-hydroxy-5-tert-butyl-1,3-benzenedicarboxaldehyde L2, respectively, were obtained and characterized by X-ray crystallography and spectroscopy (UV-vis, fluorescence and IR). X-ray crystal structure determination and DFT calculations for compounds confirmed their geometry in solution and in the solid phase. Moreover, intermolecular interactions in the crystal structure of L1 and L2 were analyzed using 3D Hirshfeld surfaces and the related 2D fingerprint plots. The 3D Hirschfeld analyses show that the most numerous interactions were found between hydrogen atoms. A considerable number of such interactions are justified by the presence of bulk tert-butyl groups in L2. The luminescence of L1 and L2 in various solvents and in the solid state was studied. In general, the quantum efficiency between 0.14 and 0.70 was noted. The increase in the quantum efficiency with the solvent polarity in the case of L1 was observed (λex = 350 nm). For L2, this trend is similar, except for the chloroform. In the solid state, emission was registered at 552 nm and 561 nm (λex = 350 nm) for L1 and L2, respectively. Thin layers of the studied compounds were deposited on Si(111) by the spin coating method or by thermal vapor deposition and studied by scanning electron microscopy (SEM/EDS), atomic force microscopy (AFM), spectroscopic ellipsometry and fluorescence spectroscopy. The ellipsometric analysis of thin materials obtained by thermal vapor deposition showed that the band-gap energy was 3.45 ± 0.02 eV (359 ± 2 nm) and 3.29 ± 0.02 eV (377 ± 2 nm) for L1/Si and L2/Si samples, respectively. Furthermore, the materials of the L1/Si and L2/Si exhibited broad emission. This feature can allow for using these compounds in LED diodes.

A binuclear Cu(II) complex as an efficient photocatalyst for N-alkylation of aromatic amines

Visible-light driven photoreactions using transition metal complexes as catalysts are currently a research hotspot in developing environmentally friendly sustainable processes. To develop a potential copper-based photocatalyst, a binuclear Cu(II) complex has been synthesized using a Mannich base ligand viz. 2,4-dichloro-6-((4-(2-hydroxyethyl)piperazin-1-yl)methyl)phenol (H₂L). The photocatalyst has been characterized using ESI-MS and single crystal X-ray diffraction. Under the irradiation of visible light, the catalyst can catalyze hydrogen auto-transfer in N-alkylated amine formation and benzyl alcohol oxidation reactions with excellent conversion. A plausible mechanistic pathway for catalytic reactions has been explored through ESI-MS spectrometric, UV-Vis spectroscopic and computational studies.

Tuning Inner-Sphere Electron Transfer in a Series of Copper/Nitrosoarene Adducts

A series of copper/nitrosoarene complexes was created that mimics several steps in biomimetic O₂ activation by copper(I). The reaction of the copper(I) complex of N,N,N',N'-tetramethypropylenediamine with a series of para-substituted nitrosobenzene derivatives leads to adducts in which the nitrosoarene (ArNO) is reduced by zero, one, or two electrons, akin to the isovalent species dioxygen, superoxide, and peroxide, respectively. The geometric and electronic structures of these adducts were characterized by means of X-ray diffraction, vibrational analysis, ultraviolet-visible spectroscopy, NMR, electrochemistry, and density functional theory (DFT) calculations. The bonding mode of the NO moiety depends on the oxidation state of the ArNO moiety: κN for ArNO, mononuclear η²-NO and dinuclear μ-η²:η¹ for ArNO^•-, and dinuclear μ-η²:η² for ArNO^2-. ¹⁵N isotopic labeling confirms the reduction state by measuring the NO stretching frequency (1392 cm^-1 for κN-ArNO, 1226 cm^-1 for η²-ArNO^•-, 1133 cm^-1 for dinuclear μ-η²:η¹-ArNO^•-, and 875 cm^-1 for dinuclear μ-η²:η² for ArNO^2-). The ¹⁵N NMR signal disappears for the ArNO^•- species, establishing a unique diagnostic for the radical state. Electrochemical studies indicate reduction waves that are consistent with one-electron reduction of the adducts and are compared with studies performed on Cu-O₂ analogues. DFT calculations were undertaken to confirm our experimental findings, notably to establish the nature of the charge-transfer transitions responsible for the intense green color of the complexes. In fine, this family of complexes is unique in that it walks through three redox states of the ArNO moiety while keeping the metal and its supporting ligand the same. This work provides snapshots of the reactivity of the toxic nitrosoarene molecules with the biologically relevant Cu(I) ion.

Dinuclear Copper(II) Complexes with Schiff Bases Derived from 2-Hydroxy-5-Methylisophthalaldehyde and Histamine or 2-(2-Aminoethyl)pyridine and Their Application as Magnetic and Fluorescent Materials in Thin Film Deposition

Two Cu(II) complexes, 1 and 2, with tridentate Schiff bases derived from 2-hydroxy-5-methylisophthalaldehyde and histamine HL1 or 2-(2-aminoethyl)pyridine HL2, respectively, were obtained and characterized by X-ray crystallography, spectroscopic (UV-vis, fluorescence, IR, and EPR), magnetic, and thermal methods. Despite the fact that the chelate formed by the NNO ligand donors (C26-C25H2-C24H2-N23=C23H-C22-C19Ph(O1)-C2(Ph)-C3H=N3-C4H2-C5H2-C6 fragment) are identical, as well as the synthesis of Cu(II) complexes (Cu:L = 2:1 molar ratio) was performed in the same manner, the structures of the complexes differ significantly. The complex 1, {[Cu2(L1)Cl2]2[CuCl4]}·2MeCN·2H2O, consists of [Cu2(L1)Cl2]+ units in which Cu(II) ions are bridged by the HL1 ligand oxygen and each of these Cu(II) ions is connected with Cu(II) ions of the next dimeric unit via two bridging Cl- ions to form a chain structure. In the dinuclear [Cu2(L2)Cl3]0.5MeCN complex 2, each Cu(II) is asymmetrically bridged by the ligand oxygen and chloride anions, whereas the remaining chloride anions are apically bound to Cu(II) cations. In contrast to the complex 1, the square-pyramidal geometry of the both Cu(II) centers is strongly distorted. The magnetic study revealed that antiferromagnetic interactions in the complex 2 are much stronger than in the complex 1, which was corresponded with magneto-structural examination. Thin layers of the studied Cu(II) complexes were deposited on Si(111) by the spin coating method and studied by scanning electron microscopy (SEM/EDS), atomic force microscopy (AFM), and fluorescence spectroscopy. The Cu(II) complexes and their thin layers exhibited fluorescence between 489-509 nm and 460-464 nm for the compounds and the layers, respectively. Additionally, DFT calculations were performed to explain the structures and electronic spectral properties of the ligands.

Synthesis and Characterization of Cu(II) and Mixed-Valence Cu(I)Cu(II) Clusters Supported by Pyridylamide Ligands

A group of copper complexes supported by polydentate pyridylamide ligands H₂bpda and H₂ppda were synthesized and characterized. The two Cu(II) dimers [Cu^II₂(Hbpda)₂(ClO₄)₂] (1) and [Cu^II₂(ppda)₂(DMF)₂] (2) were constructed by using neutral ligands to react with Cu(II) salts. Although the dimers showed similar structural features, the second-sphere interactions affect the structures differently. With the application of Et₃N, the tetranuclear cluster (HNEt₃)[Cu^II₄(bpda)₂(μ₃-OH)₂(ClO₄)(DMF)₃](ClO₄)₂ (3) and hexanuclear cluster (HNEt₃)₂[Cu^II₆(ppda)₆(H₂O)₂(CH₃OH)₂](ClO₄)₂ (4) were prepared under similar reaction conditions. The symmetrical and unsymmetrical arrangement of the ligand donors in ligands H₂bpda and H₂ppda led to the dramatic conformation difference of the two Cu(II) complexes. As part of our effort to explore mixed-valence copper chemistry, the triple-decker pentanuclear cluster [Cu^II₃Cu^I₂(bpda)₃(μ₃-O)] (5) was prepared. XPS examination demonstrated the localized mixed-valence properties of complex 5. Magnetic studies of the clusters with EPR evidence showed either weak ferromagnetic or antiferromagnetic interactions among copper centers. Due to the trigonal-planar conformation of the trinuclear Cu(II) motif with the μ₃-O center, complex 5 exhibits geometric spin frustration and engages in antisymmetric exchange interactions. DFT calculations were also performed to better interpret spectroscopic evidence and understand the electronic structures, especially the mixed-valence nature of complex 5.

Cu(i)-O2 oxidation reactions in a fluorinated all-O-donor ligand environment

Investigation of Cu-O2 oxidation reactivity is important in biological and anthropogenic chemistry. Zeolites are one of the most promising Cu/O based oxidation catalysts for development of industrial-scale CH4 to CH3OH conversion. Their oxidation mechanisms are not well understood, however, highlighting the importance of the investigation of molecular Cu(i)-O2 reactivity with O-donor complexes. Herein, we give an overview of the synthesis, structural properties, and O2 reactivity of three different series of O-donor fluorinated Cu(i) alkoxides: K[Cu(OR)2], [(Ph3P)Cu(μ-OR)2Cu(PPh3)], and K[(R3P)Cu(pinF)], in which OR = fluorinated monodentate alkoxide ligands and pinF = perfluoropinacolate. This breadth allowed for the exploration of the influence of the denticity of the ligand, coordination number, the presence of phosphine, and KF/O interactions on their O2 reactivity. KF/O interactions were required to activate O2 in the monodentate-ligand-only family, whereas these connections did not affect O2 activation in the bidentate complexes, potentially due to the presence of phosphine. Both families formed trisanionic, trinuclear cores of the form {Cu3(μ3-O)2}3-. Intramolecular and intermolecular substrate oxidation were also explored and found to be influenced by the fluorinated ligand. Namely, {Cu3(μ3-O)2}3- from K[Cu(OR)2] could perform both monooxygenase reactivity and oxidase catalysis, whereas those from K[(R3P)Cu(pinF)] could only perform oxidase catalysis.

High-valence CuIICuIII species in action: demonstration of aliphatic C–H bond activation at room temperature

The electrochemically generated Cu^IICu^III mixed-valence species promotes activation of strong aliphatic C–H bonds (i.e. toluene), turning from stoichiometric to catalytic upon addition of a base.

Synthesis and characterization of a novel CNT-FeNi3/DFNS/Cu(ii) magnetic nanocomposite for the photocatalytic degradation of tetracycline in wastewater

Herein, Cu(ii) complexes were anchored within the nanospaces of a magnetic fibrous silicate with a high surface area and easily accessible active sites via a facile approach, leading to the successful synthesis of a novel potent nanocatalyst (FeNi₃/DFNS/Cu). Furthermore, FeNi₃/DFNS/Cu was supported on carbon nanotubes (CNTs) via an usual nozzle electrospinning method (CNT-FeNi₃/DFNS/Cu). In addition, its performance as a photocatalyst for the degradation of tetracycline was tested in a batch reactor. Tetracycline is an antibiotic that is commonly utilized in veterinary medicine and in the treatment of human infections, but is hazardous to aquatic environments. However, the usual processes for the removal of tetracycline are not efficient. The eco-friendly attributes of this catalytic system include high catalytic activity and ease of recovery from the reaction mixture using an external magnet, and it can be reused several times without significant loss in its performance. Also, protocols such as hot filtration, and mercury poisoning provided complete insight into the nature of this heterogeneous catalyst.

Herein, Cu(ii) complexes were anchored within the nanospaces of a magnetic fibrous silicate with a high surface area and easily accessible active sites via a facile approach, leading to the successful synthesis of a novel potent nanocatalyst (FeNi₃/DFNS/Cu).

Tetranuclear and dinuclear phenoxido bridged copper complexes based on unsymmetrical thiosemicarbazone ligands

Dinuclear and tetranuclear copper(ii) complexes based on N,S ligand systems in the solid state and in solution are described.