Coordinatively Unsaturated Metal–Organic Frameworks M3(btc)2 (M = Cr, Fe, Co, Ni, Cu, and Zn) Catalyzing the Oxidation of CO by N2O: Insight from DFT Calculations

Near-Barrierless CO Oxidation Using Phosphotungstic Acid-Supported Single-Atom Catalysts

Efficient CO oxidation at ambient or low temperatures is essential for environmental purification and selective CO oxidation in H2, yet achieving this remains a challenge with current methodologies. In this research, we extensively evaluated the catalytic performance of phosphotungstic acid (PTA)-supported 11 M1/PTA single-atom catalysts (SACs) using density functional theory calculations across both gas phase and 12 common solvents. The Rh1/PTA, Pd1/PTA, and Pt1/PTA systems exhibit moderate CO adsorption energies, facilitating the feasibility of oxygen vacancy formation. Remarkably, the Pd1/PTA and Pt1/PTA catalysts exhibited negligible energy barriers and demonstrated exceptionally high catalytic rates, with values reaching up to (1 × 1010)11, markedly exceeding the threshold for room temperature reactions, set at 6.55 × 108. This phenomenon is attributed to a transition from the high-energy barrier processes of oxygen dissociation in O2 and N-O bond dissociation in N2O to the more efficient dissociation of H2O2. Orbital analysis and charge variations at metal sites throughout the reaction process provide deeper insights into the role of the three metal catalytic sites in CO activation. Our findings not only reveal key aspects of SACs in facilitating CO oxidation at low temperatures but also provide valuable insights for future catalytic reaction mechanism studies and environmental applications.

Progress and challenges in nitrous oxide decomposition and valorization

Nitrous oxide (N2O) decomposition is increasingly acknowledged as a viable strategy for mitigating greenhouse gas emissions and addressing ozone depletion, aligning significantly with the UN's sustainable development goals (SDGs) and carbon neutrality objectives. To enhance efficiency in treatment and explore potential valorization, recent developments have introduced novel N2O reduction catalysts and pathways. Despite these advancements, a comprehensive and comparative review is absent. In this review, we undertake a thorough evaluation of N2O treatment technologies from a holistic perspective. First, we summarize and update the recent progress in thermal decomposition, direct catalytic decomposition (deN2O), and selective catalytic reduction of N2O. The scope extends to the catalytic activity of emerging catalysts, including nanostructured materials and single-atom catalysts. Furthermore, we present a detailed account of the mechanisms and applications of room-temperature techniques characterized by low energy consumption and sustainable merits, including photocatalytic and electrocatalytic N2O reduction. This article also underscores the extensive and effective utilization of N2O resources in chemical synthesis scenarios, providing potential avenues for future resource reuse. This review provides an accessible theoretical foundation and a panoramic vision for practical N2O emission controls.

Can the Rate of a Catalytic Turnover Be Altered by Ligands in the Absence of Direct Binding Interactions?

Second sphere coordination effects ubiquitous in enzymatic catalysis occur through direct interactions, either covalent or non-covalent, with reaction intermediates and transition states. We present herein evidence of indirect second sphere coordination effects in which ligation of water/alkanols far removed from the primary coordination sphere of the active site nevertheless alter energetic landscapes within catalytic redox cycles in the absence of direct physicochemical interactions with surface species mediating catalytic turnovers. Density functional theory, in situ X-ray absorption and infrared spectroscopy, and a wide array of steady-state and transient CO oxidation rate data suggest that the presence of peripheral water renders oxidation half-cycles within two-electron redox cycles over μ3-oxo-bridged trimers in MIL-100(M) more kinetically demanding. Communication between ligated water and the active site appears to occur through the Fe-O-Fe backbone, as inferred from spin density variations on the central μ3-oxygen 'junction'. Evidence is provided for the generality of these second sphere effects in that they influence different types of redox half-cycles or metals, and can be amplified or attenuated through choice of coordinating ligand. Specifically in the case of MIL-100(M) materials, the Cr isostructure can be made to kinetically mimic the Fe variant by disproportionately hindering oxidation half-cycles relative to the reduction half-cycles. Kinetic and spectroscopic inferences presented here significantly expand both the conceptual definition of second sphere effects as well as the palette of synthetic levers available for tuning catalytic redox performance through chemical ligation.

Theoretical study of fructose adsorption and conversion to trioses on metal-organic frameworks

The conversion of chemically modified biomass into more valuable chemicals has recently gained significant attention from industry. In this study, we investigate the adsorption of fructose and its conversion into two trioses, glyceraldehyde (GLA) and dihydroxyacetone (DHA), on metal-organic frameworks using density functional theory calculations. The reaction mechanism proceeds through two main steps: first, the opening of the fructose ring; second, the retro-aldol fragmentation, which is favored over intramolecular hydrogen shifts. The substitution of a tetravalent metal in the metal-organic framework leads to different adsorption strengths in the order Hf-NU-1000 > Zr-NU-1000 > Ti-NU-1000. The catalytic activities of Hf-NU-1000 and Zr-NU-1000 are found to be similar. Both are more active than Ti-NU1000, corresponding to their relative Lewis acidity. It was found that functionalization of the organic linkers of the Hf-NU-1000 MOF does not improve its catalytic activity. The catalytic activity follows the order Hf-MOF-808 > Hf-NU-1000 > Hf-UIO-66 when based on either the overall activation energy or the turnover frequency (TOF).

Low-Valent Metals in Metal-Organic Frameworks Via Post-Synthetic Modification

Metal-organic frameworks (MOFs) provide uniquely tunable, periodic platforms for site-isolation of reactive low-valent metal complexes of relevance in modern catalysis, adsorptive applications, and fundamental structural studies. Strategies for integrating such species in MOFs include post-synthetic metalation, encapsulation and direct synthesis using low-valent organometallic complexes as building blocks. These approaches have each proven effective in enhancing catalytic activity, modulating product distributions (i.e., by improving catalytic selectivity), and providing valuable mechanistic insights. In this minireview, we explore these different strategies, as applied to isolate low-valent species within MOFs, with a particular focus on examples that leverage the unique crystallinity, permanent porosity and chemical mutability of MOFs to achieve deep structural insights that lead to new paradigms in the field of hybrid catalysis.

Conceptual and Practical Aspects of Metal-Organic Frameworks for Solid-Gas Reactions

The presence of site-isolated and well-defined metal sites has enabled the use of metal-organic frameworks (MOFs) as catalysts that can be rationally modulated. Because MOFs can be addressed and manipulated through molecular synthetic pathways, they are chemically similar to molecular catalysts. They are, nevertheless, solid-state materials and therefore can be thought of as privileged solid molecular catalysts that excel in applications involving gas-phase reactions. This contrasts with homogeneous catalysts, which are overwhelmingly used in the solution phase. Herein, we review theories dictating gas phase reactivity within porous solids and discuss key catalytic gas-solid reactions. We further treat theoretical aspects of diffusion within confined pores, the enrichment of adsorbates, the types of solvation spheres that a MOF might impart on adsorbates, definitions of acidity/basicity in the absence of solvent, the stabilization of reactive intermediates, and the generation and characterization of defect sites. The key catalytic reactions we discuss broadly include reductive reactions (olefin hydrogenation, semihydrogenation, and selective catalytic reduction), oxidative reactions (oxygenation of hydrocarbons, oxidative dehydrogenation, and carbon monoxide oxidation), and C-C bond forming reactions (olefin dimerization/polymerization, isomerization, and carbonylation reactions).

Rational Regulation of Reducibility and Acid Site on Mn-Fe-BTC to Achieve High Low-Temperature Catalytic Denitration Performance

Selective catalytic reduction with ammonia is the mainstream technology of flue gas denitration (de-NO_x). The reducibility and acid site are two important factors affecting the de-NO_x performance, and effective regulation between them is the key to obtain a highly efficient de-NO_x catalyst. Herein, a series of Mn-Fe-BTC with different ratios of Mn and Fe are synthesized, among which 2Mn-1Fe-BTC with 2:1 molar ratio of Mn and Fe has excellent low-temperature (LT) de-NO_x performance (above 90% NO conversion between 60 and 270 °C) and good tolerance to H₂O and SO₂ poisoning (88% NO conversion at 150 °C with 100 ppm of SO₂ and/or 6% H₂O). It is revealed that the reducibility properties and acid sites of Mn-Fe-BTC can be flexibly tuned by the ratio of Mn and Fe. The difference in electronegativity between Fe and Mn leads to the redistribution of valence electrons, which enables the controllable reducibility of Mn-Fe-BTC. Furthermore, different amounts of Mn and Fe lead to different electron transport, which determines the type and number of acid sites. The synergistic effect of Mn and Fe endows Mn-Fe-BTC with enhanced surface molecular adsorption capacity and enables the catalyst to selectively chemisorb NH₃ and NO at different active sites. This research provides guidance for the flexible regulation of reducibility and acid site of LT de-NO_x catalyst.

Highly Efficient Conversion of Aziridines and CO2 Catalyzed by Microporous [Cu12] Nanocages

The conversion of CO₂ as a C1 source into value-added products is an attractive alternative in view of the green synthesis. Among the reported approaches, the cyclization reaction of aziridines with CO₂ is of great significance since the generated N-containing cyclic skeletons are extensively found in pharmaceutical chemistry and industrial production. However, a low turnover number (TON) and homogeneous catalysts are often involved in this catalytic system. Herein, one novel copper-organic framework {[Cu₂(L^4-)(H₂O)₂]·3DMF·2H₂O}_n (1) (H₄L = 2'-fluoro-[1,1':4',1″-Terphenyl]-3,3″,5,5″-tetracarboxylic acid) assembled by nanosized [Cu₁₂] cages was successfully synthesized and structurally characterized, which exhibits high CO₂/N₂ selectivity due to the strong interactions between CO₂ and open Cu(II) sites and ligands in the framework. Catalytic investigations suggest that 1 as a heterogeneous catalyst can effectively catalyze the cyclization of aziridines with CO₂, and the TON can reach a record value of 90.5. Importantly, 1 displays excellent chemical stability, which can be recycled at least five times. The combination explorations of nuclear magnetic resonance (NMR), ¹³C-isotope labeling experiments, and density functional theory (DFT) clearly uncover the mechanism of this aziridine/CO₂ coupling reaction system, in which 1 and tetrabutylammonium bromide (TBAB) can highly activate the substrate molecule, and the synergistic catalytic effect between them can greatly reduce the reaction energy barrier from 51.7 to 36.2 kcal/mol.

Effects of Acid Modulators on the Microwave-Assisted Synthesis of Cr/Sn Metal-Organic Frameworks

Metal-organic frameworks (MOFs) have attracted remarkable attention for their distinguished structural designability. Precisely controlling the particle size and improving the structural stability of MOF nanoparticles influence their catalytic activity significantly. In this study, six acids (nitric, hydrochloric, formic, acetic, succinic, and citric acids) were used as modulators to prepare bimetallic MIL-101 (Cr, Sn) (MIL stands for Materials of Institut Lavoisier) via a microwave-assisted hydrothermal method. Changes in volumetric, structural, stability, and catalytic properties, size, and shape of MIL-101 (Cr, Sn) were examined using scanning electron microscopy, X-ray diffraction, thermogravimetric analysis, and N2 adsorption–desorption measurements. All modulators altered the MOF properties. Compared with other samples, acetic acid as a modulator mildly altered the MOF morphology by narrowing their particle size distribution, enhancing the specific surface area, and significantly improving their water and thermal stabilities. The addition of acetic acid was suitable for the catalytic conversion of glucose to 5-hydroxymethylfurfural (5-HMF), achieving a 43.1% 5-HMF yield with 91.4% glucose conversion in a mixed solution of γ-valerolactone and saturated salt water at 150 °C after 30 min.

Mechanistic Studies of Oxygen-Atom Transfer (OAT) in the Homogeneous Conversion of N2O by Ru Pincer Complexes

As the overall turnover-limiting step (TOLS) in the homogeneous conversion of N2O, the oxygen-atom transfer (OAT) from an N2O to an Ru-H complex to generate an N2 and Ru-OH complex has been comprehensively investigated by density functional theory (DFT) computations. Theoretical results show that the proton transfer from Ru-H to the terminal N of endo N2O is most favorable pathway, and the generation of N2 via OAT is accomplished by a three-step mechanism [N2O-insertion into the Ru-H bond (TS-1-2, 24.1 kcal mol−1), change of geometry of the formed (Z)-O-bound oxyldiazene intermediate (TS-2-3, 5.5 kcal mol−1), and generation of N2 from the proton transfer (TS-3-4, 26.6 kcal mol−1)]. The Gibbs free energy of activation (ΔG‡) of 29.0 kcal mol−1 for the overall turnover-limiting step (TOLS) is determined. With the participation of potentially existing traces of water in the THF solvent serving as a proton shuttle, the Gibbs free energy of activation in the generation of N2 (TS-3-4-OH2) decreases to 15.1 kcal mol−1 from 26.6 kcal mol−1 (TS-3-4). To explore the structure–activity relationship in the conversion of N2O to N2, the catalytic activities of a series of Ru-H complexes (C1–C10) are investigated. The excellent linear relationships (R2 > 0.91) between the computed hydricities (ΔGH−) and ΔG‡ of TS-3-4, between the computed hydricities (ΔGH−) and the ΔG‡ of TOLS, were obtained. The utilization of hydricity as a potential parameter to predict the activity is consistent with other reports, and the current results suggest a more electron-donating ligand could lead to a more active Ru-H catalyst.

Light alkane oxidation over well-defined active sites in metal–organic framework materials

We review structure–catalytic property relationships for MOF materials used in the direct oxidation of light alkanes, focusing specifically on the elucidation of active site structures and probes for reaction mechanisms.

Catalytic properties of the ferryl ion in the solid state: a computational review

This review summarises the last findings in the emerging field of heterogeneous catalytic oxidation of light alkanes by ferryl species supported on solid-state systems such as the conversion of methane into methanol by FeO-MOF74.

Electrochemical dopamine sensor based on bi-metallic Co/Zn porphyrin metal-organic framework

Integrating other metal ions into mono-metallic metal-organic framework (MOF) to form bi-metallic MOF is an effective strategy to enhance the performance of MOFs from the internal structure. In this study, two-dimensional (2D) cobalt/zinc-porphyrin (Co/Zn-TCPP) MOF nanomaterials with different Co/Zn molar ratios were synthesised using a simple surfactant-assisted method, and novel dopamine (DA) sensing methods were constructed based on these materials. The characterisation results showed that all MOF with different Co/Zn molar ratios presented a nanofilm, and the Co and Zn elements were uniformly distributed. All sensors based on Co_xZn_100-x-TCPP had a certain catalytic performance to DA. Among them, the sensor based on CO₂₅Zn₇₅-TCPP showed the strongest signal response, indicating that the catalytic performance of MOF on DA can be adjusted by changing the Co/Zn molar ratio. The doping of metal ions improves the chemical environment of the pores, and increases the types and spatial arrangement of the active sites of the MOF, which is beneficial to the electron transfer and exchange with DA; Co²⁺ and Zn²⁺ active centres have a synergistic promotion effect, so the catalytic activity of MOF is significantly improved. The linear range at the potential of 0.1 V based on Co₂₅Zn₇₅-TCPP for DA was 5 nM-177.8 μM, with a detection limit of 1.67 nM (S/N = 3). The sensor exhibited a good selectivity for detecting DA. This research is expected to provide new ideas and references for constructing high-performance sensing interfaces and platforms.

Decomposition of nitrous oxide in hydrated cobalt(I) clusters: a theoretical insight into the mechanistic roles of ligand-binding modes

Hydrated cobalt(i) cluster ions, [Co(H2O)n]+, can decompose the inert nitrous oxide molecule, N2O. Density functional theory suggests that N2O can anchor to Co+ of [Co(N2O)(H2O)n]+ through either O end-on (η1-OL) or N end-on (η1-NL) coordinate mode. The latter is thermodynamically more favorable resulting from a subtle π backdonation from Co+ to N2O. N2O decomposition involves two major processes: (1) redox reaction and (2) N-O bond dissociation. The initial activation of N2O through an electron transfer from Co+ to N2O yields anionic N2O-, which binds to the metal center of [Co2+(N2O-)(H2O)n] also through either O end-on (η1-O) or N end-on (η1-N) mode and is stabilized by water molecules through hydrogen bonding. From η1-O, subsequent N-O bond dissociation to liberate N2, producing [CoO(H2O)n]+, is straightforward via a mechanism that is commonplace for typical metal-catalyzed N2O decompositions. Unexpectedly, the N-O bond dissociation directly from η1-N is also possible and eliminates both N2 and OH, explaining the formation of [CoOH(H2O)n]+ as observed in a previous experimental study. Interestingly, formation of [CoO(H2O)n]+ is kinetically controlled by the initial redox process between Co+ and the O-bound N2O, the activation barriers of which in large water clusters (n ≥ 14) are higher than that of the unexpected N-O bond dissociation from the N-bound structure forming [CoOH(H2O)n]+. This theoretical discovery implies that in the present of water molecules, the metal-catalyzed N2O decomposition starting from an O-bound metal complex is not mandatory.

A more effective catalysis of the CO2 fixation with aziridines: computational screening of metal-substituted HKUST-1

A vital issue for the fixation and conversion of CO₂ into useful chemical products is to find effective catalysts. In this work, in order to develop more effective and diverse catalysts, we implemented the first computational screening study (at M06-2X//B3LYP level) on the cycloaddition of CO₂ with aziridines under eighteen metal-substituted HKUST-1 MOFs and tetrabutylammonium bromide (TBAB) as a co-catalyst. For all considered catalytic systems, the ring-opening of aziridine is calculated to be the rate-determining step. Up to 11 M-HKUST-1 systems, i.e., Rh (31.87 kcal mol^-1), Y (31.02), Sc (30.50), V (30.02), Tc (29.90), Cd (29.80), Ti (29.32), Mn (29.05), Zn (28.29), Fe (27.85) and Zr (25.09), possess lower ring-opening barrier heights than the original Cu-HKUST-1 (32.90), indicative of their superior catalytic ability to the original Cu-HKUST-1 in theory. With the lowest ring-opening barrier, Zr-HKUST-1 is strongly advocated for future synthetic and catalytic studies.

Density Functional Investigation of the Conversion of Furfural to Furfuryl Alcohol by Reaction with i-Propanol over UiO-66 Metal-Organic Framework

Carbonyl C═O bond reduction via catalytic transfer hydrogenation (CTH) is one of the essential processes for biomass conversion to valuable chemicals and fuels. Here, we investigate the CTH of furfural to furfuryl alcohol with i-propanol on UiO-66 metal-organic frameworks using density functional theory calculations and linear scaling relations. Initially, the reaction over two defect sites presented on Zr-UiO-66, namely, dehydrated and hydrated sites, have been compared. The hydrated active site is favored over that on the dehydrated active site since the activation free energy of the rate-determining reaction step occurring on the hydrated active site is lower than that occurring on the dehydrated active site (14.9 vs 17.9 kcal/mol). The catalytic effect of exchanged tetravalent metals (Hf and Ti) on Zr-UiO-66 is also considered. We found that Hf-UiO-66 (13.5 kcal/mol) provides a lower activation energy than Zr-UiO-66 (14.9 kcal/mol) and Ti-UiO-66 (19.4 kcal/mol), which corresponds to it having a higher Lewis acidity. The organic linkers of UiO-66 MOFs play a role in stabilizing all of the species on potential energy surfaces. The linear scaling relationship also reveals the significant role of the UiO-66 active site in activating the carbonyl C═O of furfural, and strong relationships are observed between the activation free energy, the charge of the metal at the MOF active sites, and the complexation energies in reaction coordinates.

Structures and mechanisms of CO2 cycloaddition with styrene oxide on bimetallic M–Cu–BTC MOFs (M = Mg, Ca, Al, and Ga): a DFT study

The Al–Cu–BTC catalyst having the strongest interaction with the SO molecule is the most promising catalyst for the conversion of CO₂ to cyclic carbonate.

Ultra-selective desulfurization of 4, 6-dimethyldibenzothiophene via carbon-sulfur bond cleavage with the bimetal single atom on N-rGO

A single-atom Cu and Ni anchored on N-doped Reduced Graphene Oxides, which confer the intensified exposure of interior active sites, was developed. Due to single-atom active sites which accelerated the oxygenation and hydrogenation, the prepared Cu/Ni-N-rGO shows excellent conversion, good stability and selectivity for CS bond cleavage by catalytic oxidation and hydrogenation at the different temperatures. The desulfurization ratio and selectivity for 4, 6-DMDBT to carbonhydrogen were 100 % and 100 %, respectively, on the suitable conditions. The kinetics of catalytic oxidation and in situ hydrogenation of 4, 6-DMDBT, and their mechanism over Cu/Ni-N-rGO by density functional theory was explored. Computational studies show the CS cleavage of the 4, 6-dimethyldibenzothiophene by catalytic oxidation and then in situ hydrogenation is easier than that by direct hydrogenation or catalytic oxidation.

Electronic Structure Modeling of Metal-Organic Frameworks

Owing to their molecular building blocks, yet highly crystalline nature, metal-organic frameworks (MOFs) sit at the interface between molecule and material. Their diverse structures and compositions enable them to be useful materials as catalysts in heterogeneous reactions, electrical conductors in energy storage and transfer applications, chromophores in photoenabled chemical transformations, and beyond. In all cases, density functional theory (DFT) and higher-level methods for electronic structure determination provide valuable quantitative information about the electronic properties that underpin the functions of these frameworks. However, there are only two general modeling approaches in conventional electronic structure software packages: those that treat materials as extended, periodic solids, and those that treat materials as discrete molecules. Each approach has features and benefits; both have been widely employed to understand the emergent chemistry that arises from the formation of the metal-organic interface. This Review canvases these approaches to date, with emphasis placed on the application of electronic structure theory to explore reactivity and electron transfer using periodic, molecular, and embedded models. This includes (i) computational chemistry considerations such as how functional, k-grid, and other model variables are selected to enable insights into MOF properties, (ii) extended solid models that treat MOFs as materials rather than molecules, (iii) the mechanics of cluster extraction and subsequent chemistry enabled by these molecular models, (iv) catalytic studies using both solids and clusters thereof, and (v) embedded, mixed-method approaches, which simulate a fraction of the material using one level of theory and the remainder of the material using another dissimilar theoretical implementation.

Dehydrogenation of ethanol to acetaldehyde with nitrous oxide over the metal-organic framework NU-1000: a density functional theory study

The conversion of ethanol to more valuable hydrocarbon compounds receives great attention in chemical industries because it could diminish the dependency on petroleum as raw material. We investigate the catalytic performance of Fe-supported MOF NU-1000 for the dehydrogenation of ethanol to acetaldehyde with nitrous oxide (N2O) by deriving the relevant reaction profiles with density functional theory calculations. In the proposed mechanism, the activation barrier of the rate-determining step is almost four times lower in the presence of N2O than without it. The supported NU-1000 framework plays also important role since it facilitates electron transfers and stabilizes all species along the reaction coordinate. When considering the catalytic activity of tetravalent metal centers (Zr, Hf and Ti) substituted into NU-1000 it is found that their activity decreases in the order Hf ≥ Zr > Ti, based on activation energies and turnover frequencies (TOF). Concerning MOF linkers, we show that the catalytic activity is not further improved by functionalizing NU-1000 with either electron-donating or electron-withdrawing organic groups.

Exploring the Tunability of Trimetallic MOF Nodes for Partial Oxidation of Methane to Methanol

Density functional theory is used to study the tunability of trigonal prismatic SBUs found in metal-organic frameworks (MOFs) such as MIL-100, MIL-101, and PCN-250/MIL-127 of chemical composition M³⁺₂M²⁺(μ₃-O)(RCOO)₆ for the partial oxidation of methane to methanol. We performed a combinatorial screening by varying the composition of the trimetallic node (M₁³⁺)₂(M₂²⁺) (where M₁ and M₂ = V, Cr, Mn, Fe, Co, and Ni) and calculated the reaction pathway on both M₁ and M₂ sites. The systematic replacement of metals in the trimetallic cluster allowed us to study the influence of spectator atoms on the catalytic activity of a specific metal site in the cluster toward the N₂O activation and C-H bond activation steps of the reaction. In the screening, we identified the top-performing node compositions with predicted barriers lower than those already reported for experimentally tested MOFs with trigonal prismatic SBUs. This work demonstrates the opportunity to tune the catalytic activity of MOFs for redox reactions by changing their metal node composition.

Metal-Organic Framework-Based Catalysts with Single Metal Sites

Metal-organic frameworks (MOFs) are a class of distinctive porous crystalline materials constructed by metal ions/clusters and organic linkers. Owing to their structural diversity, functional adjustability, and high surface area, different types of MOF-based single metal sites are well exploited, including coordinately unsaturated metal sites from metal nodes and metallolinkers, as well as active metal species immobilized to MOFs. Furthermore, controllable thermal transformation of MOFs can upgrade them to nanomaterials functionalized with active single-atom catalysts (SACs). These unique features of MOFs and their derivatives enable them to serve as a highly versatile platform for catalysis, which has actually been becoming a rapidly developing interdisciplinary research area. In this review, we overview the recent developments of catalysis at single metal sites in MOF-based materials with emphasis on their structures and applications for thermocatalysis, electrocatalysis, and photocatalysis. We also compare the results and summarize the major insights gained from the works in this review, providing the challenges and prospects in this emerging field.

DFT Study on the Catalytic Activity of ALD-Grown Diiron Oxide Nanoclusters for Partial Oxidation of Methane to Methanol

Using density functional theory (DFT), we studied the catalytic activity of iron oxide nanoclusters that mimic the structure of the active site in the soluble form of methane monooxygenase (sMMO) for the partial oxidation of methane to methanol. Using N₂O as the oxidant, we consider a radical-rebound mechanism and a concerted mechanism for the oxidation of methane on either a bridging oxygen (O_b) or a terminal oxygen (O_t) active site. We find that the radical-rebound pathway is preferred over the concerted pathway by 40-50 kJ/mol, but the desorption of methanol and the regeneration of the oxygen site are found to be the highest barriers for the direct conversion of methane to methanol with these catalysts. As demonstrated by a population analysis, the O_x (x = b or t) site behaves as an oxygen radical during the H abstraction, and the [Fe⁺-O_x^-] site behaves as a Lewis acid-base pair during the concerted C-H cleavage. Molecular orbital decomposition analysis further demonstrates electron transfer during the oxidation and reduction steps of the reaction. High-level multireference calculations were also carried out to further assess the DFT results. Understanding how these systems behave during the proposed reaction pathways provides new insights into how they can be tuned for methane partial oxidation.

Reduction of N2O by H2 Catalyzed by Keggin-Type Phosphotungstic Acid Supported Single-Atom Catalysts: An Insight from Density Functional Theory Calculations

In the present paper, the mechanisms of N₂O reduction by H₂ were systemically examined over various polyoxometalate-supported single-atom catalysts (SACs) M₁/PTA (M = Fe, Co, Mn, Ru, Rh, Os, Ir, and Pt; PTA = [PW₁₂O₄₀]^3-) by means of density functional theory calculations. Among these M₁/PTA SACs, Os₁/PTA SAC possesses high activity for N₂O reduction by H₂ with a relatively low rate-determining barrier. The favorable catalytic pathway involves the first and second N₂O decomposition over the Os₁/PTA SAC and hydrogenation of the key species after the second N₂O decomposition. Molecular geometry and electronic structure analyses along the favorable reaction pathway indicate that a strong charge-transfer cooperative effect of metal and support effectively improves the catalytic activity of Os₁/PTA SAC. The isolated Os atom not only plays the role of adsorption and activation of the N₂O molecule but also works as an electron transfer medium in the whole reaction process. Meanwhile, the PTA support with very high redox stability has also been proven to be capable of transporting the electron to promote the whole reaction. We expect that our computation results can provide ideas for designing new SACs for N₂O reduction by using H₂ selective catalytic reduction technology.

DFT Study of N2O Adsorption onto the Surface of M-Decorated Graphene Oxide (M = Mg, Cu or Ag)

In order to reduce the harm of nitrous oxide (N₂O) on the environment, it is very important to find an effective way to capture and decompose this nitrous oxide. Based on the density functional theory (DFT), the adsorption mechanism of N₂O on the surfaces of M-decorated (M = Mg, Cu or Ag) graphene oxide (GO) was studied in this paper. The results show that the effects of N₂O adsorbed onto the surfaces of Mg–GO by O-end and Cu–GO by N-end are favorable among all of the adsorption types studied, whose adsorption energies are −1.40 eV and −1.47 eV, respectively. Both adsorption manners belong to chemisorption. For Ag–GO, however, both the adsorption strength and electron transfer with the N₂O molecule are relatively weak, indicating it may not be promising for N₂O removal. Moreover, when Gibbs free energy analyses were applied for the two adsorption types on Mg–GO by O-end and Cu–GO by N-end, it was found that the lowest temperatures required to undergo a chemisorption process are 209 °C and 338 °C, respectively. After being adsorbed onto the surface of Mg–GO by O-end, the N₂O molecule will decompose into an N₂ molecule and an active oxygen atom. Because of containing active oxygen atom, the structure O–Mg–GO has strong oxidizability, and can be reduced to Mg–GO. Therefore, Mg–GO can be used as a catalyst for N₂O adsorption and decomposition. Cu–GO can be used as a candidate material for its strong adsorption to N₂O.

Phenol Tautomerization Catalyzed by Acid-Base Pairs in Lewis Acidic Beta Zeolites: A Computational Study

We investigate the tautomerization of phenol catalyzed by acid-base active pair sites in Lewis acidic Beta zeolites by means of density functional calculations using the M06-L functional. An analysis of the catalytic mechanism shows that hafnium on the Beta zeolite causes the strongest absorption of phenol compared to zirconium, tin, and germanium. This can be rationalized by the highest delocalization of electron density between the Lewis site and the oxygen of phenol which can in turn be quantified by the perturbative E⁽²⁾ stabilization energy. The reaction is assumed to proceed in two steps, the phenol O-H bond dissociation and the protonation of the intermediate to form the cyclohexa-2,4-dien-1-one product. The rate determining step is the first one with a free activation energy of 26.3, 25.0, 22.1 and 22.7 kcal mol^-1 for Ge-Beta, Sn-Beta, Zr-Beta, and Hf-Beta zeolites, respectively. The turnover frequencies follow these reaction barriers. Hence, the intrinsic catalytic activity of the Lewis acidic Beta zeolites studied here is in the order of Hf-Beta≈Zr-Beta>Sn-Beta> Ge-Beta for the tautomerization of phenol.

A poly(amidoamine) nanoparticle cross-linked two-dimensional metal-organic framework nanosheet membrane for water purification

Amphiphilic metal-organic framework nanosheet membranes with poly(amidoamine) (PAMAM) nanoparticles to serve as nanosheet cross-linkers are fabricated via vacuum filtration. The PAMAM cross-linked nanosheet membrane shows an outstanding structural stability in water solution and displays a remarkably enhanced rejection rate for dye molecules.

Metal-Bonded Redox-Active Triarylamines and Their Interactions: Synthesis, Structure, and Redox Properties of Paddle-Wheel Copper Complexes

Four new triphenylamine ligands with different substituents in the para position and their corresponding copper(II) complexes are reported. This study includes their structural, spectroscopic, magnetic, and electrochemical properties. The complexes possess a dinuclear copper(II) paddle-wheel core, a building unit that is also common in metal-organic frameworks. Electrochemical measurements demonstrate that the triphenylamine ligands and the corresponding complexes are susceptible to oxidation, resulting in the formation of stable radical cations. The square-wave voltammograms observed for the complexes are similar to those of the ligands, except for a slight shift in potential. Square-wave voltammetry data show that, in the complexes, these oxidations can be described as individual one-electron processes centered on the coordinated ligands. Spectroelectrochemistry reveals that, during the oxidation of the complexes, no difference can be detected for the spectra of successively oxidized species. For the absorption bands of the oxidized species of the ligands and complexes, only a slight shift is observed. ESR spectra for the chemically oxidized complexes indicate ligand-centered radicals. The copper ions of the paddle-wheel core are strongly antiferromagnetic coupled. DFT calculations for the fully oxidized complexes indicate a very weak ferromagnetic coupling between the copper ions and the ligand radicals, whereas a very weak antiferromagnetic coupling is found among the ligand radicals.

Computational Approach to Molecular Catalysis by 3d Transition Metals: Challenges and Opportunities

Computational chemistry provides a versatile toolbox for studying mechanistic details of catalytic reactions and holds promise to deliver practical strategies to enable the rational in silico catalyst design. The versatile reactivity and nontrivial electronic structure effects, common for systems based on 3d transition metals, introduce additional complexity that may represent a particular challenge to the standard computational strategies. In this review, we discuss the challenges and capabilities of modern electronic structure methods for studying the reaction mechanisms promoted by 3d transition metal molecular catalysts. Particular focus will be placed on the ways of addressing the multiconfigurational problem in electronic structure calculations and the role of expert bias in the practical utilization of the available methods. The development of density functionals designed to address transition metals is also discussed. Special emphasis is placed on the methods that account for solvation effects and the multicomponent nature of practical catalytic systems. This is followed by an overview of recent computational studies addressing the mechanistic complexity of catalytic processes by molecular catalysts based on 3d metals. Cases that involve noninnocent ligands, multicomponent reaction systems, metal-ligand and metal-metal cooperativity, as well as modeling complex catalytic systems such as metal-organic frameworks are presented. Conventionally, computational studies on catalytic mechanisms are heavily dependent on the chemical intuition and expert input of the researcher. Recent developments in advanced automated methods for reaction path analysis hold promise for eliminating such human-bias from computational catalysis studies. A brief overview of these approaches is presented in the final section of the review. The paper is closed with general concluding remarks.

Computational study of the carbonyl-ene reaction between formaldehyde and propylene encapsulated in coordinatively unsaturated metal-organic frameworks M3(btc)2 (M = Fe, Co, Ni, Cu and Zn)

The carbonyl-ene reaction between encapsulated formaldehyde and propylene over the coordinatively unsaturated metal-organic frameworks M3(btc)2 (M = Fe, Co, Ni, Cu and Zn) has been investigated by means of density functional calculations. Zn3(btc)2 adsorbs formaldehyde strongest due to electron delocalization between Zn and the oxygen atom of the reactant molecule. The reaction is proposed to proceed in a single step involving proton transfer and carbon-carbon bond formation. We find the relative catalytic activity to be Zn3(btc)2 > Fe3(btc)2 ≥ Co3(btc)2 > Ni3(btc)2 > Cu3(btc)2, based on activation energy and turnover frequencies (TOF). The low activation energy for Zn3(btc)2 compared to the others can be explained by the delocalization of electron density between the carbonyl bond and the catalyst active sites, leading to a more stable transition state. The five MOFs are used to propose a descriptor for the relationship between activation energy on one side and electronic properties or adsorption energies on the other side in order to allow a quick screening of other catalytic materials for this reaction.

Mechanistic insights into CO2 cycloaddition of styrene oxide on paddle-wheel metal clusters: a theoretical study

The reaction mechanisms for the CO₂ cycloaddition of styrene oxide catalyzed by M–BTC clusters have been systematically elucidated by means of the M06-L functional.