Explosive Reaction for Barium Niobium Perovskite Oxynitride

Synthesis and photocatalytic activity of cation-doped titanium oxynitrides (Ti2.85-xMxO4N, M = Zn, Co, Cu)

The utilization of visible light in photocatalytic semiconductors is restricted by the presence of a wide energy bandgap and fast electron-hole pair recombination. This study aims to address this limitation by synthesizing nitrogen- and cation-doped Cs0.68Ti1.83O4 at varying temperatures and subsequently analyzing the photocatalytic performance and mechanism. The optical experimental findings indicate that the co-doping of N/M (where M represents Zn, Co, or Cu) can considerably decrease the energy bandgap of Cs0.68Ti1.83O4 by regulating the energy band position and effectively suppressing the recombination of photogenerated carriers. Notably, at a temperature of 600 °C, the N/Cu co-doped Cs0.68Ti1.83O4 exhibits the smallest energy bandgap of 1.98 eV, thereby demonstrating superior photocatalytic performance. The photocatalytic degradation test of pollutants shows that the degradation efficiency of methylene blue solution in 120 minutes under light was 84%, which is the result of the interaction between ˙OH and ˙O2-. This study provides new possibilities for the study of co-doped modified photocatalytic materials.

Perovskite BaTaO2 N: From Materials Synthesis to Solar Water Splitting

Barium tantalum oxynitride (BaTaO2 N), as a member of an emerging class of perovskite oxynitrides, is regarded as a promising inorganic material for solar water splitting because of its small band gap, visible light absorption, and suitable band edge potentials for overall water splitting in the absence of an external bias. However, BaTaO2 N still exhibits poor water-splitting performance that is susceptible to its synthetic history, surface states, recombination process, and instability. This review provides a comprehensive summary of previous progress, current advances, existing challenges, and future perspectives of BaTaO2 N for solar water splitting. A particular emphasis is given to highlighting the principles of photoelectrochemical (PEC) water splitting, classic and emerging photocatalysts for oxygen evolution reactions, and the crystal and electronic structures, dielectric, ferroelectric, and piezoelectric properties, synthesis routes, and thin-film fabrication of BaTaO2 N. Various strategies to achieve enhanced water-splitting performance of BaTaO2 N, such as reducing the surface and bulk defect density, engineering the crystal facets, tailoring the particle morphology, size, and porosity, cation doping, creating the solid solutions, forming the heterostructures and heterojunctions, designing the photoelectrochemical cells, and loading suitable cocatalysts are discussed. Also, the avenues for further investigation and the prospects of using BaTaO2 N in solar water splitting are presented.

Metallic Powder Promotes Nitridation Kinetics for Facile Synthesis of (Oxy)Nitride Photocatalysts

Nitrogen-containing semiconductors (including metal nitrides, metal oxynitrides, and nitrogen-doped metal oxides) have been widely researched for their application in energy conversion and environmental purification because of their unique characteristics; however, their synthesis generally encounters significant challenges owing to sluggish nitridation kinetics. Herein, a metallic-powder-assisted nitridation method is developed that effectively promotes the kinetics of nitrogen insertion into oxide precursors and exhibits good generality. By employing metallic powders with low work functions as electronic modulators, a series of oxynitrides (i.e., LnTaON2 (Ln = La, Pr, Nd, Sm, and Gd), Zr2 ON2 , and LaTiO2 N) can be prepared at lower nitridation temperatures and shorter nitridation periods to obtain comparable or even lower defect concentrations compared to those of the conventional thermal nitridation method, leading to superior photocatalytic performance. Moreover, some novel nitrogen-doped oxides (i.e., SrTiO3- x Ny and Y2 Zr2 O7- x Ny ) with visible-light responses can be exploited. As revealed by density functional theory (DFT) calculations, the nitridation kinetics are enhanced via the effective electron transfer from the metallic powder to the oxide precursors, reducing the activation energy of nitrogen insertion. The modified nitridation route developed in this work is an alternative method for preparing (oxy)nitride-based materials for energy/environment-related heterogeneous catalysis.

Two-Step Solid-State Synthesis of Ternary Nitride Materials

Ternary nitride materials hold promise for many optical, electronic, and refractory applications; yet, their preparation via solid-state synthesis remains challenging. Often, high pressures or reactive gases are used to manipulate the effective chemical potential of nitrogen, yet these strategies require specialized equipment. Here, we report on a simple two-step synthesis using ion-exchange reactions that yield rocksalt-derived MgZrN2 and Mg2NbN3, as well as layered MgMoN2. All three compounds show almost temperature-independent and weak paramagnetic responses to an applied magnetic field at cryogenic temperatures, indicating phase-pure products. The key to synthesizing these ternary materials is an initial low-temperature step (300-450 °C) to promote Mg-M-N nucleation. The intermediates then are annealed (800-900 °C) to grow crystalline domains of the ternary product. Calorimetry experiments reveal that initial reaction temperatures are determined by phase transitions of reaction precursors, whereas heating directly to high temperatures results in decomposition. These two-step reactions provide a rational guide to material discovery of other bulk ternary nitrides.

Combustion Reactions between Transition-Metal Chlorides and Sodium Amide and Their Ignition Temperature

Combustion reactions between metal chlorides and sodium amide proceed in a short time; however, these reactions must be carried out with appropriate safety measures. Investigating their ignition temperatures would facilitate safe handling and give kinetic insights about the reaction between powders. Here, we investigated the products of the reactions between metal chlorides and sodium amide and measured their ignition temperatures. The products were mainly composed of nitrides, metals, and sodium chloride. The reactions of 4d and 5d metal chlorides initiated the reaction below room temperature, while 3d metal chlorides, except copper chloride, initiated the reaction upon heating. We found the correlation between the ignition temperatures and the reaction energies of the combustion reaction.

Low temperature synthesis of barium oxynitridosilicates using BaCN2 and SiO2

Barium oxynitridosilicates, Ba3Si6O12N2 and Ba3Si6O9N4, were obtained from a mixture of BaCN2 and SiO2 at 800 °C, which is several hundred degrees lower than the temperature required in solid state reactions using BaCO3, SiO2 and Si3N4. The low-temperature formation mechanism was investigated by thermogravimetry analysis in conjunction with gas chromatography and mass spectroscopy. The phase ratio between the oxynitridosilicates was controlled by tuning the reaction temperature, duration, and atmosphere. Almost single-phase Ba3Si6O12N2 was obtained by reaction at 800 °C for 15 h under a N2 atmosphere, but the product changed to Ba3Si6O9N4 after 50 h at 800 °C or by heating at 950 °C for 15 h. The photoluminescence properties of Eu-doped products obtained at 800 °C using a mixture of BaCN2 : Eu and SiO2 were investigated.

Environmentally Benign Synthesis and Color Tuning of Strontium-Tantalum Perovskite Oxynitride and Its Solid Solutions

A facile method was successfully developed to prepare strontium-tantalum perovskite oxynitride, SrTaO₂N, and its solid solutions. Urea was employed as a solid nitriding agent to eliminate the use of toxic NH₃ gas. In addition, utilization of sol-gel-derived Ta₂O₅ gel as a Ta precursor allowed for completion of nitridation within a shorter period and at a lower calcination temperature compared with the conventional ammonolysis process. Optimization of the reaction conditions, such as the urea content, allowed for the production of solid solutions of SrTaO₂N and Sr_1.4Ta_0.6O_2.9. The products exhibited optical absorption and chromatic colors because of the narrower band gaps of oxynitrides compared with those of oxides. The O/N ratios of the solid solutions were easily adjusted by varying the amount of urea in the mixture of precursors. As a result, the colors of the products ranged from yellow to brown. The nitridation process and products developed in this study are interesting environmentally benign alternatives to conventional inorganic pigments.