Porous Anionic Uranyl–Organic Networks for Highly Efficient Cs+ Adsorption and Investigation of the Mechanism

Iodine capture of a two-dimensional layered uranyl-organic framework: a combined DFT and AIMD study

To develop nuclear energy sustainably, it is important to effectively capture radioiodine in nuclear waste. In this study, we used density functional theory (DFT) and ab initio molecular dynamics (AIMD) calculations to investigate how well the uranyl-organic framework (UOF) could capture radioiodine. We found that the uranyl center and C-N ring sites in both cluster and periodic UOF models are very attractive to the I2 molecule. The adsorption energies of the I2 molecule in the periodic UOF models are as high as -1.10 eV, which is much higher than in the cluster model. The interaction characteristics between the I2 molecule and the UOF were revealed by electronic density topological analyses. Our AIMD simulations at 300 and 600 K have confirmed that the UOF has high adsorption kinetics for I2 molecules and can effectively capture them. The UOF has a high adsorption capacity and good adsorption stability for the I2 molecule, making it a promising option for the environmentally friendly removal of radioiodine.

Synthesis of double-shelled periodic mesoporous organosilica nanospheres/MIL-88A-Fe composite and its elevated performance for Pb2+ removal in water

Herein, we report the synthesis of double-shelled periodic mesoporous organosilica nanospheres/MIL-88A-Fe (DSS/MIL-88A-Fe) composite through a hydrothermal method. To survey the structural and compositional features of the synthesized composite, a variety of spectroscopic and microscopic techniques, including FT-IR, XRD, BET, TEM, FE-SEM, EDX, and EDX-mapping, have been employed. A noteworthy point in this synthesis procedure is the integration of MOF with PMO to increase the adsorbent performance, such as higher specific surface area and more active sites. This combination leads to achieving a structure with an average size of 280 nm and 1.1 μm long attributed to DSS and MOF, respectively, microporous structure and relatively large specific surface area (312.87 m²/g). The as-prepared composite could be used as an effective adsorbent with a high adsorption capacity (250 mg/g) and quick adsorption time (30 min) for the removal of Pb²⁺ from water. Importantly, DSS/MIL-88A-Fe composite revealed acceptable recycling and stability, since the performance in Pb²⁺ removal from water remained above 70% even after 4 consecutive cycles.

Energy-structure-property relationships in uranium metal-organic frameworks

Located at the foot of the periodic table, uranium is a relatively underexplored element possessing rich chemistry. In addition to its high relevance to nuclear power, uranium shows promise for small molecule activation and photocatalysis, among many other powerful functions. Researchers have used metal-organic frameworks (MOFs) to harness uranium's properties, and in their quest to do so, have discovered remarkable structures and unique properties unobserved in traditional transition metal MOFs. More recently, (e.g. the last 8-10 years), theoretical calculations of framework energetics have supplemented structure-property studies in uranium MOFs (U-MOFs). In this Perspective, we summarize how these budding energy-structure-property relationships in U-MOFs enable a deeper understanding of chemical phenomena, enlarge chemical space, and elevate the field to targeted, rather than exploratory, discovery. Importantly, this Perspective encourages interdisciplinary connections between experimentalists and theorists by demonstrating how these collaborations have elevated the entire U-MOF field.

Unveiling Structural Diversity of Uranyl Compounds of Aprotic 4,4'-Bipyridine N,N'-Dioxide Bearing O-Donors

As an aprotic O-donor ligand, 4,4'-bipyridine N,N'-dioxide (DPO) shows good potential for the preparation of uranyl coordination compounds. In this work, by regulating reactant compositions and synthesis conditions, diverse coordination assembly between uranyl and DPO under different reaction conditions was achieved in the presence of other coexisting O-donors. A total of ten uranyl-DPO compounds, U-DPO-1 to U-DPO-10, have been synthesized by evaporation or hydro/solvothermal treatment, and the possible competition and cooperation of DPO with other O-donors for the formation of these uranyl-DPO compounds are discussed. Starting with an aqueous solution of uranyl nitrate, it is found that an anionic nitrate or hydroxyl group is involved in the coordination sphere of uranyl in U-DPO-1 ((UO₂)(NO₃)₂(H₂O)₂·(DPO)), U-DPO-2 ((UO₂)(NO₃)₂(DPO)), and U-DPO-3 ((UO₂)(DPO)(μ₂-OH)₂), where DPO takes three different kinds of coordination modes, i.e. uncoordinated, monodentate, and biconnected. The utilization of UO₂(CF₃SO₃)₂ in acetonitrile, instead of an aqueous solution of uranyl nitrate, precludes the participation of nitrate and hydroxyl, and ensures the engagement of DPO ligands (4-5 DPO ligands for each uranyl) in a uranyl coordination sphere of U-DPO-4 ([(UO₂)(CF₃SO₃)(DPO)₂](CF₃SO₃)), U-DPO-5 ([UO₂(H₂O)(DPO)₂](CF₃SO₃)₂) and U-DPO-6 ([(UO₂)(DPO)_2.5](CF₃SO₃)₂). Moreover, when combined with anionic carboxylate ligands, terephthalic acid (H₂TPA), isophthalic acid (H₂IPA), and succinic acid (H₂SA), DPO works well with them to produce four mixed-ligand uranyl compounds with similar structures of two-dimensional (2D) networks or three-dimensional (3D) frameworks, U-DPO-7 ((UO₂)(TPA)(DPO)), U-DPO-8 ((UO₂)₂(DPO)(IPA)₂·0.5H₂O), U-DPO-9 ((UO₂)(SA)(DPO)·H₂O), and U-DPO-10 ((UO₂)₂(μ₂-OH)(SA)_1.5(DPO)). Density functional theory (DFT) calculations conducted to probe the bonding features between uranyl ions and different O-donor ligands show that the bonding ability of DPO is better than that of anionic CF₃SO₃ ^-, nitrate, and a neutral H₂O molecule and comparable to that of an anionic carboxylate group. Characterization of physicochemical properties of U-DPO-7 and U-DPO-10 with high phase purity including infrared (IR) spectroscopy, thermogravimetric analysis (TGA), and luminescence properties is also provided.

Ionic metal-organic frameworks (iMOFs): progress and prospects as ionic functional materials

Metal-organic frameworks (MOFs) have been a research hotspot for the last two decades, witnessing an extraordinary upsurge across various domains in materials chemistry. Ionic MOFs (both anionic and cationic MOFs) have emerged as next-generation ionic functional materials and are an important subclass of MOFs owing to their ability to generate strong electrostatic interactions between their charged framework and guest molecules. Furthermore, the presence of extra-framework counter-ions in their confined nanospaces can serve as additional functionality in these materials, which endows them a significant advantage in specific host-guest interactions and ion-exchange-based applications. In the present review, we summarize the progress and future prospects of iMOFs both in terms of fundamental developments and potential applications. Furthermore, the design principles of ionic MOFs and their state-of-the-art ion exchange performances are discussed in detail and the future perspectives of these promising ionic materials are proposed.

Progress in solid state and coordination chemistry of actinides in China

In the past decade, the area of solid state chemistry of actinides has witnessed a rapid development in China, based on the significantly increased proportion of the number of actinide containing crystal structures reported by Chinese researchers from only 2% in 2010 to 36% in 2021. In this review article, we comprehensively overview the synthesis, structure, and characterizations of representative actinide solid compounds including oxo-compounds, organometallic compounds, and endohedral metallofullerenes reported by Chinese researchers. In addition, Chinese researchers pioneered several potential applications of actinide solid compounds in terms of adsorption, separation, photoelectric materials, and photo-catalysis, which are also briefly discussed. It is our hope that this contribution not only calls for further development of this area in China, but also arouses new research directions and interests in actinide chemistry and material sciences.

Two different coordination modes of the Schiff base derived from ortho-vanillin and 2-(2-aminomethyl)pyridine in a mononuclear uranyl complex

This work describes the reaction of the potentially tetradentate Schiff-base ligand N-(2-pyridylmethy)-3-methoxysalicylaldimine (HL) with UO₂(O₂CMe)₂·2H₂O and UO₂(NO₃)₂· 6H₂O in MeOH in the absence or presence of an external base, respectively. The product from these reactions is the mononuclear complex [UO₂(L)₂] (1). Its structure has been determined by single-crystal, X-ray crystallography. The anionic ligand adopts two different coordination modes (1.1011, 1.1010; Harris notation) in the complex. The new compound was fully characterized by solid-state (IR, Raman and Photoluminescence spectroscopies) and solution (UV-Vis and ¹H NMR spectra, conductivity measurements) techniques.

Highly Efficient Uptake of Cs+ by Robust Layered Metal-Organic Frameworks with a Distinctive Ion Exchange Mechanism

¹³⁷Cs with strong radioactivity and a long half-life is highly hazardous to human health and the environment. The efficient removal of ¹³⁷Cs from complex solutions is still challenging because of its high solubility and easy mobility and the influence of interfering ions. It is highly desirable to develop effective scavengers for radiocesium remediation. Here, the highly efficient uptake of Cs⁺ has been realized by two robust layered metal-organic frameworks (MOFs), namely [(CH₃)₂NH₂]In(L)₂·DMF·H₂O (DMF = N,N'-dimethylformamide, H₂L= H₂aip (5-aminoisophthalic acid) for 1 and H₂hip (5-hydroxyisophthalic acid) for 2). Remarkably, 1 and 2 hold excellent acid and alkali resistance and radiation stabilities. They exhibit fast kinetics, high capacities (q _m ^Cs = 270.86 and 297.67 mg/g for 1 and 2, respectively), excellent selectivity for Cs⁺ uptake, and facile elution for the regeneration of materials. Particularly, 1 and 2 can achieve efficient Cs⁺/Sr²⁺ separation in a wide range of Sr/Cs molar ratios. For example, the separation factor (SF _Cs/Sr) is up to ∼320 for 1. Moreover, the Cs⁺ uptake and elution mechanisms have been directly elucidated at the molecular level by an unprecedented single-crystal to single-crystal (SC-SC) structural transformation, which is attributed to the strong interactions between COO^- functional groups and Cs⁺ ions, easily exchangeable [(CH₃)₂NH₂]⁺, and flexible and robust anionic layer frameworks with open windows as "pockets". This work highlights layered MOFs for the highly efficient uptake of Cs⁺ ions in the field of radionuclide remediation.

Rapid Cs+ Capture via Multiple Supramolecular Interactions in Anionic Metal-Organic Framework Isomers

Metal-organic frameworks (MOFs) provide an ideal platform for ion exchange due to their high porosity and structural designability; however, developing MOFs that have the essential characteristics for ion exchange remains a challenge. These crucial features include fast kinetics, selectivity, and stability. We present two anionic isomers, DGIST-2 (2D) and DGIST-3 (3D), comprising distinctly arranged 5-(1,8-naphthalimido)isophthalate ligands and In³⁺ cations. Interestingly, in protic solvents, DGIST-2 transforms into a hydrolytically stable crystalline phase, DGIST-2'. DGIST-2' and DGIST-3 exhibit rapid Cs⁺ adsorption kinetics, as well as high Cs⁺ affinity in the presence of competing cations. The mechanism for rapid and selective sorption is explored based on the results of single-crystal X-ray diffraction analysis of Cs⁺-incorporated DGIST-3. In Cs⁺-containing solutions, the loosely incorporated dimethylammonium countercation of the anionic framework is replaced by Cs⁺, which is held in the hydrophobic cavity by supramolecular ion-ion and cation-π interactions.

Impact of Proximity Effect on Uranyl Coordination of Conformationally Variable Weakly-Bonded Cucurbit[6]uril-Bipyridinium Pseudorotaxane

To explore the proximity effect in uranyl coordination of weak-bonded cucurbit[6]uril(CB[6])-bipyridinium ligands, a new pseudorotaxane precursor C7BPCN3@CB[6] containing 1, 1'-(heptyl-1,7-diyl)bis(3-cyanopyridin-1-ium) bromide (C7BPCN3) with elongated alkyl chains and meta-substituted cyano groups,...

The effective removal of Pb2+ by activated carbon fibers modified by l-cysteine: exploration of kinetics, thermodynamics and mechanism

Herein, we developed a low-cost fabrication route to prepare chemically grafted activated carbon fibers, which effectively removed Pb²⁺ from solution. Multiple characteristic results indicated that l-cyst-ACF had abundant nitrogen-containing and sulfur-containing functional groups. Based on the XPS and EDS analyses, the capture of Pb²⁺ was attributed to the abundant adsorption sites on the fiber surface. According to the analysis of the pseudo-second-order kinetic model and the Langmuir isotherm model, the adsorption process could be interpreted as monolayer adsorption and chemisorption, and the equilibrium adsorption capacity was determined to be 136.80 mg g⁻¹ by fitting the pseudo-second-order kinetic model. The maximum adsorption capacity of l-cyst-ACF for Pb²⁺ was calculated to be 179.53 mg g⁻¹ using the Langmuir model. In addition, the adsorption reaction was endothermic and spontaneous, as evidenced by the thermodynamic parameters. The outcomes of this study provide a low-cost and feasible strategy for the remediation of Pb²⁺ pollution in the environment.

A low-cost fabrication route has been developed to prepare a chemically grafted activated carbon fiber, which effectively removed Pb²⁺ from solution. Multiple characterisation results indicated that l-cyst-ACF had abundant N-containing and S-containing functional groups.

Metal-organic frameworks as superior porous adsorbents for radionuclide sequestration: Current status and perspectives

Efficient separation of hazardous radionuclides from radioactive waste remains a challenge to the global acceptance of nuclear power due to complex nature of the waste, high radiotoxicities and presence of large number of interfering elements. Sorption of radioactive elements from liquid phase, gas phase or their solid particulates on various synthetic organic, inorganic or biological sorbents is looked as one of the options for their remediation. In this context, highly porous materials, termed as metal-organic frameworks (MOFs), have shown promise for efficient capturing of various types of radioactive elements. Major advantages that have been advocated for the application of MOFs in radionuclide sorption are their excellent chemical stability, and their large surface area due to abundant functional groups, and porosity. In this review, recent developments on the application of MOFs for radionuclide sequestration are briefly discussed. Focus has been devoted to address the separation of few crucial radioactive elements such as Th, U, Tc, Re, Se, Sr and Cs from aqueous solutions, which are important for liquid radioactive waste management. Apart from these radioactive metal ions, removal of radionuclide bearing gases such as I₂, Xe, and Kr are also discussed. Aspects related to the interaction of MOFs with the radionuclides are also discussed. Finally, a perspective for comprehensive investigation of MOFs for their applications in radioactive waste management has been outlined.

Proximity Effect in Uranyl Coordination of the Cucurbit[6]uril-Bipyridinium Pseudorotaxane Ligand for Promoting Host-Guest Synergistic Chelating

In the present work, we proposed regulating uranyl coordination behavior of cucurbituril-bipyridinium pseudorotaxane ligand by utilizing meta-functionalized bipyridinium dicarboxylate guest. A tailored pseudorotaxane precursor involving 1,1'-(hexane-1,6-diyl)bis(3-cyanopyridin-1-ium) bromide (C6BPCN3) and cucurbit[6]uril (CB[6]) has designed and synthesized. Through in situ hydrolysis of the pseudorotaxane ligands and their coordination assembly with uranyl cations, seven new uranyl-rotaxane coordination polymers URCP1-URCP7 have been obtained under hydrothermal conditions in the presence of different anions. It is demonstrated that the variation of carboxylate groups from para- to meta-position greatly affected the coordination behaviors of the meta-functionalized pseudorotaxane linkers, which are enriched from simple guest-only binding to host-guest simultaneous coordination and synergistic chelating. This effective regulation on uranyl coordination of supramolecular pseudorotaxane can be attributed to the proximity effect, which refers to the meta-position carboxyl group being spatially closer to the portal carbonyl group of CB[6]. Moreover, by combining other regulation methods such as introducing competing counterions and modulating solution acidity, the nuclearity of the uranyl center and the coordination patterns of the pseudorotaxane ligand can be diversely tuned, which subsequently exert great influence on the final dimensionality of resultant uranyl compounds. This work presents a large diversity of uranyl-based coordination polyrotaxane compounds with fascinating mechanically interlocked components and, most importantly, provides a feasible approach to adjust and control the metal coordination behavior of the pseudorotaxane ligand that might expand the scope of application of such supramolecular ligands.

Tunable Metal-Organic Frameworks Based on 8-Connected Metal Trimers for High Ethane Uptake

Metal trimers [M₃ (O/OH)](OOCR)₆ are among the most important structural building blocks. From these trimers, a great success has been achieved in the design of 6- or 9-connected framework materials with various topological features and outstanding gas-sorption properties. In comparison, 8-connected trimer-based metal-organic frameworks (MOFs) are rare. Given multiple competitive pathways for the formation of 6- or 9-connected frameworks, it remains challenging to identify synthetic or structural parameters that can be used to direct the self-assembly process toward trimer-based 8-connected materials. Here, a viable strategy called angle bending modulation is revealed for creating a prototypical MOF type based on 8-connected M₃ (OH)(OOCR)₅ (Py-R)₃ trimers (M = Zn, Co, Fe). As a proof of concept, six members in this family are synthesized using three types of ligands (CPM-80, -81, and -82). These materials do not possess open-metal sites and show excellent uptake capacity for various hydrocarbon gas molecules and inverse C₂ H₆ /C₂ H₄ selectivity. CPM-81-Co, made from 2,5-furandicarboxylate and isonicotinate, features selectivity of 1.80 with high uptake capacity for ethane (123 cm³ g^-1 ) and ethylene (113 cm³ g^-1 ) at 298 K and 1 bar.

3D Uranyl Organic Frameworks Supported by Rigid Octadentate Carboxylate Ligand: Synthesis, Structure Diversity, and Luminescence Properties

Seven three dimensional (3D) uranyl organic frameworks (UOFs), formulated as [NH₄ ][(UO₂ )₃ (HTTDS)(H₂ O)] (1), [(UO₂ )₄ (HTTDS)₂ ](HIM)₆ (2, IM=imidazole), [(UO₂ )₄ (TTDS)(H₂ O)₂ (Phen)₂ ] (3, Phen=1,10-phenanthroline), [Zn(H₂ O)₄ ]_0.5 [(UO₂ )₃ (HTTDS)(H₂ O)₄ ] (4), and {(UO₂ )₂ [Zn(H₂ O)₃ ]₂ (TTDS)} (5), {Zn(UO₂ )₂ (H₂ O)(Dib)_0.5 (HDib)(HTTDS)} (6, Dib=1,4-di(1H-imidazol-1-yl)benzene) and [Na]{(UO₂ )₄ [Cu₃ (u₃ -OH)(H₂ O)₇ ](TTDS)₂ } (7) have been hydrothermally prepared using a rigid octadentate carboxylate ligand, tetrakis(3,5-dicarboxyphenyl)silicon(H₈ TTDS). These UOFs have different 3D self-assembled structures as a function of co-ligands, structure-directing agents and transition metals. The structure of 1 has an infinite ribbon formed by the UO₇ pentagonal bipyramid bridged by carboxylate groups. With further introduction of auxiliary N-donor ligands, different structure of 2 and 3 are formed, in 2 the imidazole serves as space filler, while in 3 the Phen are bound to [UO₂ ]²⁺ units as co-ligands. The second metal centers were introduced in the syntheses of 4-7, and in all cases, they are part of the final structures, either as a counterion (4) or as a component of framework (5-7). Interesting, in 7, a rare polyoxometalate [Cu₃ (μ₃ -OH)O₇ (O₂ CR)₄ ] cluster was found in the structure. It acts as an inorganic building unit together with the dimer [(UO₂ )₂ (O₂ CR)₄ ] unit. Those uranyl carboxylates were sufficiently determined by single crystal X-ray diffraction, and their topological structures and luminescence properties were analyzed in detail.

Pyrene-based metal organic frameworks: from synthesis to applications

Pyrene is one of the most widely investigated aromatic hydrocarbons given to its unique optical and electronic properties. Hence, pyrene-based ligands have been attractive for the synthesis of metal-organic frameworks (MOFs) in the last few years. In this review, we will focus on the most important characteristics of pyrene, in addition to the development and synthesis of pyrene-based molecules as bridging ligands to be used in MOF structures. We will summarize the synthesis attempts, as well as the post-synthetic modifications of pyrene-based MOFs by the incorporation of metals or ligands in the structure. The discussion of promising results of such MOFs in several applications; including luminescence, photocatalysis, adsorption and separation, heterogeneous catalysis, electrochemical applications and bio-medical applications will be highlighted. Finally, some insights and future prospects will be given based on the studies discussed in the review. This review will pave the way for the researchers in the field for the design and development of novel pyrene-based structures and their utilization for different applications.

Metal-Organic Frameworks for Liquid Phase Applications

In the last two decades, metal-organic frameworks (MOFs) have attracted overwhelming attention. With readily tunable structures and functionalities, MOFs offer an unprecedentedly vast degree of design flexibility from enormous number of inorganic and organic building blocks or via postsynthetic modification to produce functional nanoporous materials. A large extent of experimental and computational studies of MOFs have been focused on gas phase applications, particularly the storage of low-carbon footprint energy carriers and the separation of CO2-containing gas mixtures. With progressive success in the synthesis of water- and solvent-resistant MOFs over the past several years, the increasingly active exploration of MOFs has been witnessed for widespread liquid phase applications such as liquid fuel purification, aromatics separation, water treatment, solvent recovery, chemical sensing, chiral separation, drug delivery, biomolecule encapsulation and separation. At this juncture, the recent experimental and computational studies are summarized herein for these multifaceted liquid phase applications to demonstrate the rapid advance in this burgeoning field. The challenges and opportunities moving from laboratory scale towards practical applications are discussed.

Variability of Uranyl Carboxylates from Rigid Terophenyldicarboxylic Acid Ligands

Three uranyl carboxylates, namely, (UO₂)(L¹)(H₂O)_0.5 (1), [(UO₂)(L²)(H₂O)]·2H₂O (2), and [(UO₂)(L²)(H₂O)]·(CH₃CN) (3), were synthesized hydrothermally from 2',3',5',6'-tetramethyl-(1,1':4',1″-terphenyl)-4,4″-dicarboxylic acid (H₂L¹) and 2',5'-dimethyl-(1,1':4',1″-terphenyl)-3,3″-dicarboxylic acid (H₂L²), which are all steric carboxylic acid ligands but vary with the carboxylic acid group position and methyl group number. It is found that compound 1 displays a three-dimensional 8-fold-interpenetrated net with channels running along the c direction. Compounds 2 and 3 are isostructural, and all display two-dimensional-layered crystal structures but contain different guest molecules. The photophysical measurements reveal that compounds 1 and 2, which contain disordered water molecules, are luminescence-quenched, whereas compound 3 containing acetonitrile molecules is luminescent.

Caesium adsorption on a zeolitic imidazolate framework (ZIF-8) functionalized by ferrocyanide

¹³⁷Cs is one of the most hazardous radionuclides in nuclear waste owing to its toxicity. Developing an adsorbent for Cs⁺ with a high capacity and selectivity is a challenging task. A metal-organic framework (MOF) is a material with a high surface area that has been widely applied in wastewater treatment. Exploiting the affinity between ferrocyanide (FC) and Cs⁺, zeolitic imidazolate framework-8 (ZIF-8) was chemically functionalized with FC, ZIF-8-FC to selectively capture Cs⁺. After functionalization, ZIF-8-FC has a hollow morphology and small FC related crystals, which might result in better migration of Cs⁺ inside ZIF-8-FC. This synergistic effect was proven by the Q_max of ZIF-8-FC, 422.42 mg g^-1, which is 15.9 times higher than that of ZIF-8. Additionally, ZIF-8-FC retained its good adsorption performance within a pH range of 3-11 and an excellent Cs⁺ selectivity even in artificial seawater conditions. The structure of ZIF-8-FC after adsorption proves its stability. Furthermore, the thermodynamic adsorption implied that higher temperatures are more favorable for Cs⁺ uptake. This work demonstrates the remarkable adsorption and selectivity of ZIF-8-FC, which make it a promising candidate for remediation of radioactive Cs⁺.

Controlled dye release from a metal-organic framework: a new luminescent sensor for water

By introducing the dye Rhodamine 6G (R6G) into a metal-organic framework (MOF), Mn-sdc-2 (H₂sdc = 4,4'-stilbenedicarboxylic acid), with a pore size of 20 × 9.8 Ų, the composite R6G@Mn-sdc-2 was obtained. Subsequently, the MOF Mn-sdc-1 with a smaller pore size of 7.5 × 7.5 Ų can be formed through a single-crystal to single-crystal transformation from Mn-sdc-2, thus tightly locking the dye R6G within the pores. Compared with R6G@Mn-sdc-2, R6G@Mn-sdc-1 exhibits a stronger fluorescence emission of R6G. Because the MOF Mn-sdc-1 can reversibly transform back to Mn-sdc-2 in the presence of trace water, the dye R6G can be released. This enables R6G@Mn-sdc-1 to be used as a new luminescent sensor for trace water in organic solvents by monitoring the fluorescence intensity of released R6G. The limit of detection can reach 0.035% in ethanol (v : v), which is among the most sensitive fluorescent water probes.

Lanthanide clusters as highly efficient catalysts regarding carbon dioxide activation

Lanthanide clusters display a wide substrate scope and high catalytic activity for the insertion of CO₂ into epoxides to form cyclic carbonates.

Structural Diversity of Bipyridinium-Based Uranyl Coordination Polymers: Synthesis, Characterization, and Ion-Exchange Application

As well-known functional groups with excellent electro/photochromic and ion-exchange properties, bipyridinium motifs have been used in functionalized metal-organic coordination polymers, but they are still rarely applied to construct actinide coordination polymers. In this work, we utilized a bipyridinium-based carboxylic acid, 1,1'-bis(4-carboxyphenyl)-4,4'-bipyridinium bis(chloride) ([H₂bcbp]Cl₂), as the organic ligand to assemble with uranyl cations. By the introduction of different kinds of auxiliary ligands and adjustment of the pH, five novel uranyl coordination compounds, 1-5, have been synthesized through hydrothermal reactions. Starting from uranyl ions and terephthalic acid (H₂TP) and H₂bcbp ligands, [(UO₂)₂(bcbp)(TP)₂]·3H₂O (1) has a wave-shaped two-dimensional (2D) structure consisting of dinuclear units connected by terephthalate linkers and further supported by the longer H₂bcbp ligands. [(UO₂)₂(bcbp)(PA)₂]·4H₂O (2) has a zigzag chain of dimeric uranium units, and [(UO₂)₂(bcbp)(bpdc)₂]·5H₂O (3) forms a one-dimensional ribbonlike structure. The 2D structures of [(UO₂)(bcbp)(OH)(H₂O)]·Cl (4) and [(UO₂)(bcbp)Cl]·Cl (5) are similar, both of which are constructed from dinuclear uranyl units and bcbp^2- ligands. Furthermore, the performance for perrhenate removal of compound 4 with a cationic framework is assessed, and we found that compound 4 can efficiently remove ReO₄^- from an aqueous solution in a wide range of pH values. This work extends the library of viologen derivative-based uranyl coordination polymers, provides to some extent broader insights into actinide coordination chemistry of functionalized ligands, and may facilitate the ion-exchange applications of related coordination polymers.

Mechanistic insight into the adsorption of diclofenac by MIL-100: Experiments and theoretical calculations

The development of high-efficiency adsorbents and the exploration of their adsorption mechanisms are major challenges in environmental remediation. Herein, MIL-100 was prepared, characterized, and utilized for the adsorptive removal of diclofenac sodium (DCF) from aqueous solutions. A high monolayer adsorption capacity of 773 mg g^-1 was recorded. The adsorption mechanism was proposed based on different contributions of two types of pore structure of MIL-100 to the adsorption of DCF from aqueous solutions according to the experimental results and theoretical calculation. During adsorption process, DCF (5.2 × 7.4 × 10.3 Å) diffused through the free area of hexagonal pores (8.6 × 8.6 Å) into the cages of MIL-100, whilst it was adsorbed by the pentagonal pores (4.8 × 5.8 Å) preferentially. Internal mass transfer resistance, which was identified as one of the dominant rate-limiting steps by the mass transfer resistance kinetic models based on the Sips model, will be derived from the diffusion process, which was affected by the size-sieving effect of the pore structure of MIL-100. The successful diffusion of DCF into the interior of MIL-100 and the stable configuration between MIL-100 and DCF accounted for the high adsorption capacity. The capture of DCF into MIL-100 also resulted in the pore size distribution variation of adsorbent, which provided vital experimental evidence for the proposed mechanism. This study may offer deeper insights into other pollutants removal by metal-organic frameworks type adsorbents.

Selective Environmental Remediation of Strontium and Cesium Using Sulfonated Hyper-Cross-Linked Polymers (SHCPs)

Sulfonated hyper-cross-linked polymers based on 4,4'-bis(chloromethyl)-1,1'-biphenyl (BCMBP) were synthesized via metal-free (SHCP-1) and conventional Lewis acid-catalyzed (SHCP-2) Friedel-Crafts alkylation routes. The sulfonated polymers possessed BET surface areas in excess of 500 m²·g^-1. SHCP-1 was investigated for its ability to extract Sr and Cs ions from aqueous solutions via the ion-exchange reaction of the sulfonic acid moiety. Equilibrium uptake data could be accurately modeled by the Dubinin-Radushkevich isotherm, with maximum calculated loading values of 95.6 ± 2.8 mg·g^-1 (Sr) and 273 ± 37 mg·g^-1 (Cs). Uptake of both target ions was rapid, with pseudo second-order rate constants calculated as 7.71 ± 1.1 (×10^-2) for Sr and 0.113 ± 0.014 for Cs. Furthermore, the polymer was found to be highly selective toward the target ions over large excesses of naturally occurring competing metal ions Na, K, Mg, and Ca. We conclude that hyper-cross-linked polymers may offer intrinsic advantages over other adsorbents for the remediation of aqueous Sr and Cs contamination.

3-Hydroxy-2-Pyrrolidinone as a Potential Bidentate Ligand for in Vivo Chelation of Uranyl with Low Cytotoxicity and Moderate Decorporation Efficacy: A Solution Thermodynamics, Structural Chemistry, and in Vivo Uranyl Removal Survey

Uranium poses a threat for severe renal and bone damage in vivo. With the rapid development of nuclear industry, it is more urgent than ever to search for potential in vivo uranium chelators. In this work, 3-hydroxy-2-pyrrolidinone (HPD) is investigated as a new potential uranium decorporation ligand. The potentiometric titration measurements were carried out, and the stability constants were determined to be log β₁₁₀ = 10.5(7), log β₁₂₀ = 20.7(9), and log β₁₃₀ = 28.2(4). The species distribution diagram shows that nearly all uranyl is complexed by HPD at pH 7.4 under the defined condition. A single crystal of uranyl and HPD complexes, [(UO₂)₃O(H₂O)₃(C₄H₆NO₂)₃]·NO₃·12H₂O (uranyl-HPD), was obtained via an evaporation method. The overall structure of uranyl-HPD is a trimer that consists of three uranyl units and three HPD ligands. The uranyl unit is equatorially coordinated by three oxygen atoms from two HPD agents, one coordinated water molecule, and one μ₃-O atom that is shared by three uranyl units. The results of the cytotoxicity assay indicate that the ligand is less toxic than the chelators used clinically (i.e., DTPA-ZnNa₃ and 3-hydroxy-1,2-dimethyl-4(1 H)-pyridone (DFP)). The results of the uranium removal assay using the NRK-52E cell show that it could reduce as much as 58% of the uranium content at the cellular level. Furthermore, the in vivo uranium decorporation assays demonstrate that HPD can remove 52% of uranium deposited in the kidney but shows poor uranium removal efficacy in the bone.

Rational synthesis, crystal structure, and sensing and adsorption properties of luminescent metal–organic frameworks

Five novel Cd(ii) metal–organic frameworks (Cd-MOFs) were synthesized employing a rational design approach under solvothermal conditions. The luminescence sensing and the targeted dye adsorption properties of the MOFs 1–5 are investigated.

Time-controlled synthesis of the 3D coordination polymer U(1,2,3-Hbtc)2 followed by the formation of molecular poly-oxo cluster {U14} containing hemimellitate uranium(iv)

Two coordination compounds bearing tetravalent uranium were synthesized in the presence of tritopic hemimellitic acid in acetonitrile with a controlled amount of water (H₂O/U ≈ 8) and structurally characterized. Compound 1, [U(1,2,3-Hbtc)₂]·0.5CH₃CN is constructed around an eight-fold coordinated uranium cationic unit [UO₈] linked by the poly-carboxylate ligands to form dimeric subunits, which are further connected to form infinite corrugated ribbons and a three-dimensional framework. Compound 2, [U₁₄O₈(OH)₄Cl₈(H₂O)₁₆(1,2,3-Hbtc)₈(ox)₄(ac)₄] ({U₁₄}) exhibits an unprecedented polynuclear {U₁₄} poly-oxo uranium cluster surrounded by O-donor and chloride ligands. It is based on a central core of [U₆O₈] type surrounded by four dinuclear uranium-subunits {U₂}. Compound 1 was synthesized by a direct reaction of hemimellitic acid with uranium tetrachloride in acetonitrile (+H₂O), while the molecular species ({U₁₄} (2)) crystallized from the supernatant solution after one month. The slow hydrolysis reaction together with the partial decomposition of the starting organic reactants into oxalate and acetate molecules induces the generation of such a large poly-oxo cluster with fourteen uranium centers. Structural comparisons with other closely related uranium-containing clusters, such as the {U₁₂} cluster based on the association of inner core [U₆O₈] with three dinuclear sub-units {U₂}, were performed.

The synthesis of a 3D coordination polymer [U(HL)₂] (L = hemimellitate) and a new poly-oxo cluster {U₁₄} afterwards is presented.

A solid-state chemical method for synthesizing MgO nanoparticles with superior adsorption properties

As a traditional and effective adsorbent, MgO is a low-cost, eco-friendly, nontoxic, and economical material for wastewater treatment. However, multistep processing and the use of organic agents result in high costs and lead to environmental pollution, strongly inhibiting the practical application of MgO. Herein, a simple solid-state chemical route has been used to prepare small-sized MgO nanoparticles with a large specific surface area of 213 m² g⁻¹ without using liquid solvents, template agents, or surfactants. This facile method is a green strategy that is suitable for large-scale production, avoiding complex preparation processes and serious environmental pollution. The obtained small-sized MgO nanoparticles showed a superior adsorption capacity of 2375 mg g⁻¹ towards Congo red, originating from the large specific surface area and surface features (hydrogen bonds and electrostatic interactions). The adsorption behavior obeyed a pseudo-second-order rate equation and the Langmuir isotherm adsorption model. This study provides a route for the synthesis of oxides with large specific surface areas and obtained an adsorbent with superior adsorption capacity.

As a traditional and effective adsorbent, MgO is a low-cost, eco-friendly, nontoxic, and economical material for wastewater treatment.

Rational assembly of functional Co-MOFs via a mixed-ligand strategy: synthesis, structure, topological variation, photodegradation properties and dye adsorption

Four novel Co(ii) metal–organic frameworks were synthesized employing a rational design approach under solvothermal conditions.