Furfural to Furfuryl Alcohol: Computational Study of the Hydrogen Transfer on Lewis Acidic BEA Zeolites and Effects of Cation Exchange and Tetravalent Metal Substitution

Theoretical study of fructose adsorption and conversion to trioses on metal-organic frameworks

The conversion of chemically modified biomass into more valuable chemicals has recently gained significant attention from industry. In this study, we investigate the adsorption of fructose and its conversion into two trioses, glyceraldehyde (GLA) and dihydroxyacetone (DHA), on metal-organic frameworks using density functional theory calculations. The reaction mechanism proceeds through two main steps: first, the opening of the fructose ring; second, the retro-aldol fragmentation, which is favored over intramolecular hydrogen shifts. The substitution of a tetravalent metal in the metal-organic framework leads to different adsorption strengths in the order Hf-NU-1000 > Zr-NU-1000 > Ti-NU-1000. The catalytic activities of Hf-NU-1000 and Zr-NU-1000 are found to be similar. Both are more active than Ti-NU1000, corresponding to their relative Lewis acidity. It was found that functionalization of the organic linkers of the Hf-NU-1000 MOF does not improve its catalytic activity. The catalytic activity follows the order Hf-MOF-808 > Hf-NU-1000 > Hf-UIO-66 when based on either the overall activation energy or the turnover frequency (TOF).

Mechanism of Catalytic Transfer Hydrogenation for Furfural Using Single Ni Atom Catalysts Anchored to Nitrogen-Doped Graphene Sheets

Catalytic transfer hydrogenation (CTH) of α,β-unsaturated aldehydes using single metal atom catalysts supported on nitrogen-incorporated graphene sheet (M-N_x-Gr) materials has attracted increasing attention recently, yet the reaction mechanism remains to be explored. Compared to the Ni-N₄-Gr model in which the dissociation of isopropanol is highly unfavorable as a result of steric hindrance and inertness of the Ni-N₄ site embedded in graphene, the Ni-N₃ site in Ni-N₃-Gr is more active and facilitates the formation of *H with isopropanol as the H donor, where the dissociation of H from isopropanol with an energy barrier of 0.83 eV is the rate-determining step. An alternative reaction path starts from the coadsorption of isopropanol and furfural molecules at the Ni-N₃ site, followed by a direct hydrogen transfer between the two molecules; however, the rate-determining step has a much higher energy barrier of 1.32 eV. Our calculations suggest that the hydrogenation of the aldehyde group is kinetically more favorable than the C═C hydrogenation, revealing the high chemoselectivity of furfural to furfuryl alcohol. Our investigations reveal that the CTH mechanism using the Ni-N₃-Gr catalyst is different from that on traditional metal oxides, where the former has only one single active site, while two active sites are required for the latter. The proposed reaction mechanism of CTH for furfural in this study should be helpful to guide the design of single metal atom catalysts with appropriate N coordination for application in chemoselective hydrogenation reactions.

Porous SiO2 Nanospheres Modified with ZrO2 and Their Use in One-Pot Catalytic Processes to Obtain Value-Added Chemicals from Furfural

Porous SiO2 nanospheres were modified with different loadings of ZrO2 to obtain catalysts with a Si/Zr molar ratio from 2.5 to 30. These materials were characterized by X-ray diffraction, transmission and scanning electron microscopies, N2 adsorption-desorption at -196 °C, X-ray photoelectron spectroscopy and pyridine and 2-6-dimethylpyridine thermoprogrammed desorption. The characterization of these catalysts has revealed that a high proportion of Zr favors the formation of Lewis acid sites, which are implied in catalytic transfer hydrogenation processes, whereas the low Brönsted acidity promotes a dehydration reaction, being possible to give rise to a large variety of products from furfural through consecutive reactions, such as furfuryl alcohol, i-propyl furfuryl ether, i-propyl levulinate, and γ-valerolactone, in a range of temperature of 110-170 °C and 1-6 h of reaction.

Recyclable Zr/Hf-Containing Acid-Base Bifunctional Catalysts for Hydrogen Transfer Upgrading of Biofuranics: A Review

The massive burning of a large amount of fossil energy has caused a lot of serious environmental issues (e.g., air pollution and climate change), urging people to efficiently explore and valorize sustainable alternatives. Biomass is being deemed as the only organic carbon-containing renewable resource for the production of net-zero carbon emission fuels and fine chemicals. Regarding this, the selective transformation of high-oxygen biomass feedstocks by catalytic transfer hydrogenation (CTH) is a very promising strategy to realize the carbon cycle. Among them, the important Meerwein-Ponndorf-Verley (MPV) reaction is believed to be capable of replacing the traditional hydrogenation strategy which generally requires high-pressure H2 and precious metals, aiming to upgrade biomass into downstream biochemical products and fuels. Employing bifunctional heterogeneous catalysts with both acidic and basic sites is needed to catalyze the MPV reaction, which is the key point for domino/cascade reaction in one pot that can eliminate the relevant complicated separation/purification step. Zirconium (Zr) and hafnium (Hf), belonging to transition metals, rich in reserves, can demonstrate similar catalytic efficiency for MPV reaction as that of precious metals. This review introduced the application of recyclable heterogeneous non-noble Zr/Hf-containing catalysts with acid-base bifunctionality for CTH reaction using the safe liquid hydrogen donor. The corresponding catalysts were classified into different types including Zr/Hf-containing metal oxides, supported materials, zeolites, metal-organic frameworks, metal-organic hybrids, and their respective pros and cons were compared and discussed comprehensively. Emphasis was placed on evaluating the bifunctionality of catalytic material and the key role of the active site corresponding to the structure of the catalyst in the MPV reaction. Finally, a concise summary and prospect were also provided centering on the development and suggestion of Zr/Hf-containing acid-base bifunctional catalysts for CTH.

Density Functional Investigation of the Conversion of Furfural to Furfuryl Alcohol by Reaction with i-Propanol over UiO-66 Metal-Organic Framework

Carbonyl C═O bond reduction via catalytic transfer hydrogenation (CTH) is one of the essential processes for biomass conversion to valuable chemicals and fuels. Here, we investigate the CTH of furfural to furfuryl alcohol with i-propanol on UiO-66 metal-organic frameworks using density functional theory calculations and linear scaling relations. Initially, the reaction over two defect sites presented on Zr-UiO-66, namely, dehydrated and hydrated sites, have been compared. The hydrated active site is favored over that on the dehydrated active site since the activation free energy of the rate-determining reaction step occurring on the hydrated active site is lower than that occurring on the dehydrated active site (14.9 vs 17.9 kcal/mol). The catalytic effect of exchanged tetravalent metals (Hf and Ti) on Zr-UiO-66 is also considered. We found that Hf-UiO-66 (13.5 kcal/mol) provides a lower activation energy than Zr-UiO-66 (14.9 kcal/mol) and Ti-UiO-66 (19.4 kcal/mol), which corresponds to it having a higher Lewis acidity. The organic linkers of UiO-66 MOFs play a role in stabilizing all of the species on potential energy surfaces. The linear scaling relationship also reveals the significant role of the UiO-66 active site in activating the carbonyl C═O of furfural, and strong relationships are observed between the activation free energy, the charge of the metal at the MOF active sites, and the complexation energies in reaction coordinates.

Dehydrogenation of ethanol to acetaldehyde with nitrous oxide over the metal-organic framework NU-1000: a density functional theory study

The conversion of ethanol to more valuable hydrocarbon compounds receives great attention in chemical industries because it could diminish the dependency on petroleum as raw material. We investigate the catalytic performance of Fe-supported MOF NU-1000 for the dehydrogenation of ethanol to acetaldehyde with nitrous oxide (N2O) by deriving the relevant reaction profiles with density functional theory calculations. In the proposed mechanism, the activation barrier of the rate-determining step is almost four times lower in the presence of N2O than without it. The supported NU-1000 framework plays also important role since it facilitates electron transfers and stabilizes all species along the reaction coordinate. When considering the catalytic activity of tetravalent metal centers (Zr, Hf and Ti) substituted into NU-1000 it is found that their activity decreases in the order Hf ≥ Zr > Ti, based on activation energies and turnover frequencies (TOF). Concerning MOF linkers, we show that the catalytic activity is not further improved by functionalizing NU-1000 with either electron-donating or electron-withdrawing organic groups.

Investigation of the effective factors on the mutagen X formation in drinking water by response surface methodology

Mutagen 3-chloro-4-(dichloromethyl)-5-hydroxy-2(5H)-furanone (MX) is known as a potent factor in inducing DNA damage and increasing cancer risk. MX is a chlorination disinfection byproduct that comes from the reaction of humic acids and chlorine in drinking water. The purpose of this study was to evaluate the effects of significant factors (including pH, reaction time, chlorine and the concentration of organic materials (TOC)) and their interactions on the MX formation rate in chlorinated drinking water using Box-Behnken Design (BBD) and response surface method (RSM). For this purpose, the simulation of water chlorination disinfection process was carried out in a laboratory scale. A quadratic model was chosen to determine the mathematical relations between the response and the effective factors. All linear parameters, as well as second-degree components except chlorine, were statistically significant. Also, the interactions of contact time with TOC, free chlorine residual with TOC, and chlorine with pH were also statistically significant. Statistical results showed that the pH had a great effect on the potential of MX formation, and then the factors of TOC, chlorine and contact time were effective, respectively. The percentage of contribution (PC) of each component in the formation of MX. The highest significant percentage of contribution (48.36%) was allocated to the pH. Under the optimum conditions (contact time of 48.38 min, chlorine concentration of 0.79 mg/L, TOC concentration of 0.53 mg/L, and pH of 7.98), minimum value of MX was equal to 28.6.

Phenol Tautomerization Catalyzed by Acid-Base Pairs in Lewis Acidic Beta Zeolites: A Computational Study

We investigate the tautomerization of phenol catalyzed by acid-base active pair sites in Lewis acidic Beta zeolites by means of density functional calculations using the M06-L functional. An analysis of the catalytic mechanism shows that hafnium on the Beta zeolite causes the strongest absorption of phenol compared to zirconium, tin, and germanium. This can be rationalized by the highest delocalization of electron density between the Lewis site and the oxygen of phenol which can in turn be quantified by the perturbative E⁽²⁾ stabilization energy. The reaction is assumed to proceed in two steps, the phenol O-H bond dissociation and the protonation of the intermediate to form the cyclohexa-2,4-dien-1-one product. The rate determining step is the first one with a free activation energy of 26.3, 25.0, 22.1 and 22.7 kcal mol^-1 for Ge-Beta, Sn-Beta, Zr-Beta, and Hf-Beta zeolites, respectively. The turnover frequencies follow these reaction barriers. Hence, the intrinsic catalytic activity of the Lewis acidic Beta zeolites studied here is in the order of Hf-Beta≈Zr-Beta>Sn-Beta> Ge-Beta for the tautomerization of phenol.

Computational study of the carbonyl-ene reaction between formaldehyde and propylene encapsulated in coordinatively unsaturated metal-organic frameworks M3(btc)2 (M = Fe, Co, Ni, Cu and Zn)

The carbonyl-ene reaction between encapsulated formaldehyde and propylene over the coordinatively unsaturated metal-organic frameworks M3(btc)2 (M = Fe, Co, Ni, Cu and Zn) has been investigated by means of density functional calculations. Zn3(btc)2 adsorbs formaldehyde strongest due to electron delocalization between Zn and the oxygen atom of the reactant molecule. The reaction is proposed to proceed in a single step involving proton transfer and carbon-carbon bond formation. We find the relative catalytic activity to be Zn3(btc)2 > Fe3(btc)2 ≥ Co3(btc)2 > Ni3(btc)2 > Cu3(btc)2, based on activation energy and turnover frequencies (TOF). The low activation energy for Zn3(btc)2 compared to the others can be explained by the delocalization of electron density between the carbonyl bond and the catalyst active sites, leading to a more stable transition state. The five MOFs are used to propose a descriptor for the relationship between activation energy on one side and electronic properties or adsorption energies on the other side in order to allow a quick screening of other catalytic materials for this reaction.

Theoretical studies on the mechanism of Pd2+-catalyzed regioselective C-H acylation of azoxybenzenes with α-oxocarboxylic acids

The reaction mechanism of the Pd2+-catalyzed regioselective C(sp2)-H acylation of azoxybenzenes with α-oxocarboxylic acids has been studied by density functional theory (DFT) calculations. This reaction mechanism involves five major steps: C-H activation, deprotonation, decarboxylation, reductive elimination and oxidation. Our calculation results indicate that the N-coordinated pathway is better than the O-coordinated pathway, which can be interpreted by distortion-interaction analysis of the C-H bond activation transition states. Furthermore, we also suggest that the C-H bond acylation of aryl 1 is more favorable than that of aryl 2, which can be attributed to the fact that five-membered ring transition states are more favorable than four-membered ring transition states and the ON-group has positive charge.