Organoiridium(III) Complexes as Luminescence Color Switching Probes for Selective Detection of Nerve Agent Simulant in Solution and Vapor Phase

Chromogenic Detection of the Organophosphorus Nerve Agent Simulant DCP Mediated by Rhodium(II,II) Paddlewheel Complexes

Organophosphorus nerve agents (OPNAs) pose a great threat to humanity. Possessing extreme toxicity, rapid lethality, and an unassuming appearance, these chemical warfare agents must be quickly and selectively identified so that treatment can be administered to those affected. Chromogenic detection is the most convenient form of OPNA detection, but current methods suffer from false positives. Here, nitrogenous base adducts of dirhodium(II,II) acetate were synthesized and used as chromogenic detectors of diethyl chlorophosphate (DCP), an OPNA simulant. UV-vis spectrophotometry was used to evaluate the sensitivity and selectivity of the complexes in the detection of DCP. Visual limits of detection (LOD) for DCP were as low as 1.5 mM DCP, while UV-vis-based LODs were as low as 0.113 μM. The dirhodium(II,II) complexes were also tested with several potential interferents, none of which produced a visual color change that could be mistaken for OPNA response. Ultimately, the Rh2(OAc)4(1,8-diazabicyclo[5.4.0]undec-7-ene)2 complex showed the best combination of detection capability and interferent resistance. These results, when taken together, show that dirhodium(II,II) paddlewheel complexes with nitrogenous base adducts can produce instant, selective, and sensitive detection of DCP. It is our aim to further explore and apply this new motif to produce even more capable OPNA sensors.

A chemodosimetric chemosensor for the ratiometric detection of nerve agent-mimic DCP in solution and vapor phases

Nerve agents are among the most deadly and lethal chemical warfare agents (CWAs). Rapid identification is crucial for specialized individuals to take action against dangerous drugs. This paper describes the synthesis and characterisation of a probe (MNFZ) based on the methoxy naphthalene-furoic hydrazide group. The probe rapidly (100 s) detects and quantifies the nerve-agent simulant diethyl chlorophosphate (DCP) in both solution and vapor phases. This sensor uses a new recognition center, furoic hydrazide, where the nitrogen atom of the imine group (CN) attacks the electrophilic core phosphorus atom of DCP, followed by the hydrolysis of the imine group in the acetonitrile (ACN) solution to produce the corresponding aldehyde MNPA. The development of ICT character resulted in a distinct red-shifted ratiometric fluorescence response to DCP, with a very low limit of detection (12.2 nM). The probe is an efficient chemosensor due to its high selectivity over other organophosphorus compounds as well as its chemical stability across a wide pH range. DFT calculations, 1H NMR and HRMS were performed to finalize the sensing mechanism. Lastly, the as-designed sensor was successfully used to build a highly sensitive portable kit in test strips and a cotton biopolymer for simple and safe real-time monitoring of DCP.

Zirconium-based metal-organic framework loaded agarose hydrogels for fluorescence turn-on detection of nerve agent simulant vapor

Developing reliable sensors that accurately detect deadly chemical gases is critical to global security. Nerve agents are one of the most dangerous chemicals in the world and are often found in gaseous forms in the environment, which remain a challenge to detect because of their low levels. In this paper, a fluorescent probe based on a Zr-based metal-organic framework UiO-66-NH2 was proposed. The specific binding between the Zr-O site of UiO-66-NH2 and diethyl chlorophosphate (DCP) blocked the ligand-to-metal charge transfer (LMCT) process in UiO-66-NH2, thereby enabling the fluorescence turn-on detection of DCP. More importantly, a simple and portable hydrogel soft-solid platform (UiO-66-NH2@Aga) was constructed by incorporating UiO-66-NH2 into the formation process of agarose (Aga) hydrogel for fast and sensitive detection of gaseous DCP. When the hydrogel was exposed to a low concentration of DCP vapor, its fluorescence changed from colorless to bright blue, allowing visualization of the DCP gas for analysis. The UiO-66-NH2@Aga integrated solid-state platform showed an excellent response to DCP vapor in the detection range of 1.98 to 9.90 ppm and with a detection limit of 1.16 ppm. This work opened up a unique way to design a convenient, low cost and practical gas physical examination platform.

4-Oxo-7-fluoro-1,10-phenanthroline-2,9-diamides: Synthesis, Structural Features, Lanthanide Complexes, and Am(III)/Ln(III) Solvent Extraction

A highly efficient synthetic approach was developed for the synthesis of unsymmetrical 1,10-phenanthroline-2,9-diamides with two different substituents in the fourth and seventh positions of the phenanthroline core. The structures of these ligands were confirmed using various spectral methods including 2D-NMR and X-ray analysis. Quantum chemical calculations supported the presence of tautomeric forms of these ligands. Furthermore, it was discovered that these compounds exhibit polydentate ligand behavior toward lanthanide nitrates. The structural characteristics of the complexes formed between these ligands and lanthanide nitrates were investigated both in the solid state and in solution. To further understand the binding properties of these novel unsymmetrical ligands, the binding constants for potential complexes were quantitatively measured by using UV-vis spectrophotometric titration. This allowed for a comprehensive analysis of the binding affinity and stability of these complexes. Extraction experiments of f-elements were performed for symmetrical and unsymmetrical diamides. Overall, this study presents significant advancement in the synthesis and characterization of unsymmetrical 1,10-phenanthroline-2,9-diamides and provides valuable insights into their potential applications as polydentate ligands for lanthanide nitrates.

Pesticide pestilence: Global scenario and recent advances in detection and degradation methods

Increased anthropogenic activities are confronted as the main cause for rising environmental and health concerns globally, presenting an indisputable threat to both environment and human well-being. Modern-day industrialization has given rise to a cascade of concurrent environmental and health challenges. The global human population is growing at an alarming rate, posing tremendous pressure on future food security, and healthy and environmentally sustainable diets for all. To feed all, the global food production needs to increase by 50% by 2050, but this increase has to occur from the limited arable land, and under the present-day climate variabilities. Pesticides have become an integral component of contemporary agricultural system, safeguarding crops from pests and diseases and their use must be reduce to fulfill the SDG (Sustainable Development Goals) agenda . However, their indiscriminate use, lengthy half-lives, and high persistence in soil and aquatic ecosystems have impacted global sustainability, overshot the planetary boundaries and damaged the pure sources of life with severe and negative impacts on environmental and human health. Here in this review, we have provided an overview of the background of pesticide use and pollution status and action strategies of top pesticide-using nations. Additionally, we have summarized biosensor-based methodologies for the rapid detection of pesticide residue. Finally, omics-based approaches and their role in pesticide mitigation and sustainable development have been discussed qualitatively. The main aim of this review is to provide the scientific facts for pesticide management and application and to provide a clean, green, and sustainable environment for future generations.

Fluorescent probes for the detection of chemical warfare agents

Chemical warfare agents (CWAs) are toxic chemicals that have been intentionally developed for targeted and deadly use on humans. Although intended for military targets, the use of CWAs more often than not results in mass civilian casualties. To prevent further atrocities from occurring during conflicts, a global ban was implemented through the chemical weapons convention, with the aim of eliminating the development, stockpiling, and use of CWAs. Unfortunately, because of their relatively low cost, ease of manufacture and effectiveness on mass populations, CWAs still exist in today's world. CWAs have been used in several recent terrorist-related incidents and conflicts (e.g., Syria). Therefore, they continue to remain serious threats to public health and safety and to global peace and stability. Analytical methods that can accurately detect CWAs are essential to global security measures and for forensic analysis. Small molecule fluorescent probes have emerged as attractive chemical tools for CWA detection, due to their simplicity, ease of use, excellent selectivity and high sensitivity, as well as their ability to be translated into handheld devices. This includes the ability to non-invasively image CWA distribution within living systems (in vitro and in vivo) to permit in-depth evaluation of their biological interactions and allow potential identification of therapeutic countermeasures. In this review, we provide an overview of the various reported fluorescent probes that have been designed for the detection of CWAs. The mechanism for CWA detection, change in optical output and application for each fluorescent probe are described in detail. The limitations and challenges of currently developed fluorescent probes are discussed providing insight into the future development of this research area. We hope the information provided in this review will give readers a clear understanding of how to design a fluorescent probe for the detection of a specific CWA. We anticipate that this will advance our security systems and provide new tools for environmental and toxicology monitoring.

Recent advances in fluorescent and colorimetric chemosensors for the detection of chemical warfare agents: a legacy of the 21st century

Chemical warfare agents (CWAs) are among the most prominent threats to the human population, our peace, and social stability. Therefore, their detection and quantification are of utmost importance to ensure the security and protection of mankind. In recent years, significant developments have been made in supramolecular chemistry, analytical chemistry, and molecular sensors, which have improved our capability to detect CWAs. Fluorescent and colorimetric chemosensors are attractive tools that allow the selective, sensitive, cheap, portable, and real-time analysis of the potential presence of CWAs, where suitable combinations of selective recognition and transduction can be integrated. In this review, we provide a detailed discussion on recently reported molecular sensors with a specific focus on the sensing of each class of CWAs such as nerve agents, blister agents, blood agents, and other toxicants. We will also discuss the current technology used by military forces, and these discussions will include the type of instrumentation and established protocols. Finally, we will conclude this review with our outlook on the limitations and challenges in the area and summarize the potential of promising avenues for this field.

Norbornene-Substituted Cationic Iridium(III) Complex and Water-Soluble Luminescent Polymers Based on It: Synthesis, Photophysical and Cytotoxic Properties

Abstract

A norbornene-substituted cationic iridium(III) complex containing 1-phenylisoquinoline cyclometalating ligands and an additional phenylimidazophenanthroline ligand was synthesized. On the base of this complex, water-soluble polymers were obtained by ring-opening metathesis polymerization (ROMP). The resulting polymers showed oxygen-dependent phosphorescence in the orange spectral region and high cytotoxicity against HCT116 cancer cells.

Cyclometalated iridium(III) complex of a 1,2,3-triazole-based ligand for highly selective sensing of pyrophosphate ion

A new cyclometalated Ir(III) complex of a methylene-bridged benzimidazole-substituted 1,2,3-triazole methanol ligand has been synthesized for the photoluminescent detection of pyrophosphate (H₂P₂O₇^2-) anions. The solution structure of 1[PF6] was fully characterized by 1D (¹H, ¹³C) and 2D (¹H-¹H COSY, ¹H-¹³C HSQC, and ¹H-¹³C HMBC) NMR spectroscopy, and ESI-HRMS. The 1[PF6] acted as a highly selective luminescent sensor for H₂P₂O₇^2- in CH₃CN over other competitive ions, including H₂PO₄^-, ATP, ADP and AMP. The PL titration of 1[PF6] with H₂P₂O₇^2- in CH₃CN furnished the association constant K_a = 8.6 × 10⁷ M^-1 and a low detection limit of ∼127 nM. The structure of the analyte interacting ligand renders the Ir(III) complex-based probe highly selective for H₂P₂O₇^2- ions. The PL enhancement with H₂P₂O₇^2- is due to the hydrogen bonding interaction of H₂P₂O₇^2- with the triazole C-H, imidazole N-H, methylene hydrogen and hydroxyl groups of the ligand that has been supported by ¹H NMR titration. Further, the PL enhancement of 1·H₂P₂O₇^2- adducts was supported by triplet-state TDDFT calculations. In 1·H₂P₂O₇^2-, the ³MLCT-³MC energy gap is increased, and the 1·H₂P₂O₇^2- emits efficiently from the ³MLCT and ³ILCT excited states. Finally, a cytotoxicity study and live-cell imaging were performed. The probe showed low cytotoxicity against HeLa cells and was suitable for intracellular pyrophosphate imaging.

Killing two birds with one stone: phosphorylation by a tabun mimic and subsequent capture of cyanide using a single fluorescent chemodosimeter

In the presence of the tabun mimic diethylcyanophosphonate (DECP), a fluorescent bifunctional coumarin–enamine chemodosimeter is first phosphorylated and subsequently attacked by the released cyanide ions.

An aggregation-induced emission-active bis-heteroleptic ruthenium(ii) complex of thiophenyl substituted phenanthroline for the selective “turn-off” detection of picric acid

A bis-heteroleptic Ru(ii) polypyridine complex-based AIEgen has been developed for the selective detection of nitroaromatic explosive picric acid in aqueous media.

Ruthenium(II) Polypyridine Complex-Based Aggregation-Induced Emission Luminogen for Rapid and Selective Detection of Phosgene in Solution and in the Gas Phase

A bis-heteroleptic ruthenium(II) complex, Ru-1, of 4,7-bis(2-aminoethylamino)-1,10-phenanthroline for selective "turn-on" detection of highly toxic chemical warfare agent phosgene is presented. Probe Ru-1 exhibits aggregation-induced emission (AIE), and the restricted intramolecular motion is responsible for the AIE activity. In a CHCl₃/CH₃CN [95:5 (v/v)] solvent mixture, a unique self-assembled vesicular structure was formed after aggregation, which was supported by transmission electron microscopy, field emission scanning electron microscopy, and atmoic force microscopy studies. Probe Ru-1 showed a rapid and highly selective luminescence turn-on response for phosgene over other competitive chemical warfare agents with a low detection limit (13.9 nM) in CH₃CN. The 2-aminoethylamino groups in Ru-1 act as a reacting site for nucleophilic addition to the carbonyl center of phosgene and undergo intramolecular cyclization. The final product of the phosgene-mediated reaction, Ru-1-Phos, contains 2-imidazolidinone groups, which has been confirmed by electrospray ionization mass spectometry and ¹H nuclear magnetic resonance (NMR) spectroscopy. ¹H NMR titration of Ru-1 with phosgene supported the reaction mechanism and also pointed to the simultaneous reaction of phosgene at two 2-aminoethylamino sites. For the first time, the crystal structure of the phosgene reaction product, Ru-1-Phos, containing the cyclized 2-imidazolidinone group was confirmed by single-crystal X-ray diffraction, which indubitably validates the reaction mechanism. Triplet state time-dependent density functional theory calculations showed that the weak luminescence of Ru-1 was mostly due to the population of the non-emissive ³MC state. The cyclization reaction with phosgene and the corresponding 2-imidazolidinone product formation populated the emissive ³MLCT state in Ru-1-Phos and is the key reason for the enhanced luminescence. Furthermore, a low-cost portable test paper strip has been fabricated with Ru-1 for the real-time selective monitoring of phosgene gas at the nanomolar level.

Synthesis and biological evaluation of mixed-ligand cyclometalated iridium(III)-quinoline complexes

With the aim of gaining new insight into the underlying apoptosis mechanisms and in vivo efficacy of cyclometalated Ir(III) complexes as metalodrugs, six new cyclometalated Ir(III)-quinoline complexes, [Ir(1a)(2pq)2] (2a), [Ir(1b)(2pq)2] (2b), [Ir(1c)(2pq)2] (2c), [Ir(1d)(2pq)2] (2d), [Ir(1e)(2pq)2] (2e), and [Ir(1f)(2pq)2] (2f) (2pq = 2-phenylisoquinoline), have been synthesized using 5,7-dihalo-8-hydroxylquinoline ligands (1a-1f) and [Ir(2pq)2Cl]2 precursors and characterized. Complexes 2a-2f have shown potent anticancer activity against cisplatin-resistant SK-OV-3/DDP and A549/DDP cells (IC50 = 0.11-1.83 μM), following the order 2e > 2f > 2b > 2c > 2d > 2a. Confocal microscopy images suggest that 2e and 2b could act as red-color probes for specific cell imaging and efficiently initiate apoptosis and autophagy in the mitochondria, cell cytosol, and nucleus. Overexpression of beclin1, caspase-9, cytochrome c, LC3II, and apaf-1; inhibition of p62, cyclin D1, cyclin A2, and CDK2; and a substantial rapid accumulation suggest a paraptotic mode of cell death induced by autophagy, DNA damage, and mitochondrial stress. In addition, the inhibitory rate of 2e on A549/DDP tumor growth was 64.1% at a concentration of 10.0 mg kg-1, which is clearly higher than that of cisplatin. According to the biological assay, the cyclometalated Ir(III)-quinoline complex 2e exhibited a higher anticancer effect than 2b, which may be associated with the electronic effect of the methyl group of the 1e ligand of 2e playing a key role in the mechanism.

Coordination Complexes as a New Generation Photosensitizer for Photodynamic Anticancer Therapy

Photodynamic therapy (PDT) has become an alternative to standard cancer treatment methods such as surgery, chemotherapy and radiotherapy. The uniqueness of this method relies on the possibility of using various photosensitizers (PS) that absorb and convert light emission in radical oxygen-derived species (ROS). They can be present alone or in the presence of other compounds such as metal organic frameworks (MOFs), non-tubules or polymers. The interaction between DNA and metal-based complexes plays a key role in the development of new anti-cancer drugs. The use of coordination compounds in PDT has a significant impact on the amount ROS generated, quantum emission efficiency (Φem) and phototoxic index (PI). In this review, we will attempt to systematically review the recent literature and analyze the coordination complexes used as PS in PDT. Finally, we compared the anticancer activities of individual coordination complexes and discuss future perspectives. So far, only a few articles link so many transition metal ion coordination complexes of varying degrees of oxidation, which is why this review is needed by the scientific community to further expand this field worldwide. Additionally, it serves as a convenient collection of important, up-to-date information.

Ruthenium(II) Complex-Based G-quadruplex DNA Selective Luminescent 'Light-up' Probe for RNase H Activity Detection

A bis-heteroleptic ruthenium(II) complex, 1[PF₆ ]₂ of benzothiazole amide substituted 2,2'-bipyridine ligand (bmbbipy) has been synthesized for the selective detection of G-quadruplex (GQ) DNA and luminescence-assay-based RNase H activity monitoring. Compound 1[PF₆ ]₂ exhibited aggregation-caused quenching (ACQ) in water. Aggregate formation was supported by DLS, UV-vis, and ¹ H NMR spectroscopy results, and the morphology of aggregated particles was witnessed by SEM and TEM. 1[PF₆ ]₂ acted as an efficient GQ DNA-selective luminescent light-up probe over single-stranded and double-stranded DNA. The competency of 1[PF₆ ]₂ for selective GQ structure detection was established by PL and CD spectroscopy. For 1[PF₆ ]₂ , the PL light-up is exclusively due to the rigidification of the benzothiazole amide side arm in the presence of GQ-DNA. The interaction between the probe and GQ-DNA was analyzed by molecular docking analysis. The GQ structure detection capability of 1[PF₆ ]₂ was further applied in the luminescent 'off-on' RNase H activity detection. The assay utilized an RNA:DNA hybrid, obtained from 22AG2-RNA and 22AG2-DNA sequences. RNase H solely hydrolyzed the RNA of the RNA:DNA duplex and released G-rich 22AG2-DNA, which was detected via the PL enhancement of 1[PF₆ ]₂ . The selectivity of RNase H activity detection over various other restriction enzymes was also demonstrated.

Chromo-fluorogenic sensors for chemical warfare agents in real-time analysis: journey towards accurate detection and differentiation

The existence of chemical weapons (blister and nerve agents) is an unfortunate reality of the modern world. The usage of these chemical agents by rogue states or terrorist groups has showcased their ugly faces in the past and even in recent years. Despite extensive and strenuous efforts by the Organization for the Prohibition of Chemical Weapons (OPCW) to eliminate chemical warfare agents (CWAs) by the prohibition of their production and the destruction of their stockpiles, many countries still possess them in enormous quantities. Given the potential threat from these lethal agents, it is imperative to have a foolproof chemical sensor and detection system, which should consist of readily deployable chemical probes that can operate with high specificity and sensitivity. Over the last decade, our group has been engaged in designing and developing novel field-deployable sensing techniques by exploring approaches based on supramolecular tools, which can result in excellent specificity, sensitivity, high speed, portability and low cost. In this article, I describe our group's journey and success stories in the development of chemical warfare detection protocols, detailing the range of unique chemical probes and methods explored to achieve the specific detection of individual agents under real environmental conditions. It is interesting to note that the combination of three molecular probes (SQ, Fc and LH2) could simply achieve the detection of all CWAs at room temperature in one go without the need for nonportable and expensive instruments. The ease and generality of these techniques/methods suggest great promise for the highly specific chemical sensing of almost the entire class of CWAs. In this paper, a brief introduction is first provided to present the basic chemistry related to CWAs and the importance of supramolecular chemistry in the design of new protocols with new insights. The manipulation of molecular probes is then debated towards the development of a system for the chromo-fluorogenic sensing of CWAs without interference from most relevant analytes. Finally, the outlook of open challenges and the future developments of this rapidly evolving field is discussed.

Iridium(III) Sensitisers and Energy Upconversion: The Influence of Ligand Structure upon TTA-UC Performance

Six substituted ligands based upon 2-(naphthalen-1-yl)quinoline-4-carboxylate and 2-(naphthalen-2-yl)quinoline-4-carboxylate have been synthesised in two steps from a range of commercially available isatin derivatives. These species are shown to be effective cyclometallating ligands for Ir^III , yielding complexes of the form [Ir(C^N)₂ (bipy)]PF₆ (where C^N=cyclometallating ligand; bipy=2,2'-bipyridine). X-ray crystallographic studies on three examples demonstrate that the complexes adopt a distorted octahedral geometry wherein a cis-C,C and trans-N,N coordination mode is observed. Intraligand torsional distortions are evident in all cases. The Ir^III complexes display photoluminescence in the red part of the visible region (668-693 nm), which is modestly tuneable through the ligand structure. The triplet lifetimes of the complexes are clearly influenced by the precise structure of the ligand in each case. Supporting computational (DFT) studies suggest that the differences in observed triplet lifetime are likely due to differing admixtures of ligand-centred versus MLCT character instilled by the facets of the ligand structure. Triplet-triplet annihilation upconversion (TTA-UC) measurements demonstrate that the complexes based upon the 1-naphthyl derived ligands are viable photosensitisers with upconversion quantum efficiencies of 1.6-6.7 %.

Bis-heteroleptic Ru(ii) polypyridine complex-based luminescent probes for nerve agent simulant and organophosphate pesticide

Two bis-heteroleptic Ru(ii) complexes of a 4,7-dihydroxy-1,10-phenanthroline ligand were synthesized for the detection of the nerve agent gas mimic, DCP, and the organophosphate pesticide, dichlorvos, through the “off–on” luminescence response.

Vapochromic luminescence of a spin-coated copper(I) complex thin film by the direct coordination of vapour molecules

A homogeneous thin film of a simple and highly luminescent Cu(i) complex, [CuI(PPh3)2(py)] (PPh3 = triphenylphosphine, py = pyridine) (Cu-py), was fabricated via spin coating using polyvinylpyrrolidone (PVP) and pyridine without destroying the complex. The thin film (Cu-py@PVP), with a thickness of 1 μm, exhibited efficient response to vapour, exhibiting reversible luminescence changes between blue-green and yellow upon exposure to vapours of N-heteroaromatic compounds such as py and 2-methylpyrazine (Mepyz). Vapochromic luminescence colour change resulting from ligand substitution was also observed in the crystal state, but the response of the thin film was remarkably faster than that of the crystalline samples. The vapour-induced ligand exchange on the thin film was fully characterised by comparing the luminescence properties of the Cu-py crystal with the newly prepared Cu(i) complex, [CuI(Mepyz)(PPh3)2] (Cu-Mepyz).

D-π-A azine based AIEgen with solvent dependent response towards a nerve agent

We developed a D-π-A based unsymmetrical azine molecule 4-((E)-((E)-(4-(dipropylamino)benzylidene)hydrazono)methyl)benzonitrile [DPBN] and studied its optical and aggregation induced emission properties. The DPBN molecule shows good aggregation induced emission (AIE) behaviour with 1157-fold fluorescence enhancement in the aggregated state. In addition to that, both colorimetric as well as fluorometric sensing studies revealed that DPBN selectively detects diethylchlorophosphate (DCP), a potent nerve agent. Interestingly, DPBN shows solvent dependent optical output in the presence of DCPvia two different mechanisms. In the monomer state, it shows red shifted fluorescence enhancement along with color change from colorless to orange color via the formation of a new intramolecular charge transfer state in pure tetrahydrofuran (THF). In the aggregated state, DPBN shows blue shifted emission with fluorescence enhancement in THF-water mixture by protonation at the amine nitrogen centre. Thus, DPBN can be used as a diagnostic measure to selectively detect nerve agents like DCP. This study also paves the way for further development of molecular probes for nerve agents that would represent immense implications in various fields of chemistry and biology.

Luminescent Europium(III) "Turn-On" Sensor for G-Series Chemical Warfare Simulants: A Mechanistic Investigation

A thermodynamically stable terpyridine-dicarboxylate based emissive Eu(III) probe, [Eu(OH-TPDC)] (1), was designed as a time-resolved "turn-on" luminescent probe for the selective sensing of diethyl chlorophosphate (DCP), a G-series nerve agent simulant through modulation of sensitization of ⁵D₀ → ⁷F_J transitions from Eu(III) via quenching of nonradiative vibrational energy transfer.

A Reusable Polymeric Film for the Alternating Colorimetric Detection of a Nerve Agent Mimic and Ammonia Vapor with Sub-Parts-per-Million Sensitivity

Thin polymeric films were developed for the vapor-phase sequential colorimetric detection of a nerve agent mimic and ammonia with high sensitivity. N-(4-Benzoylphenyl)acrylamide (BPAm), N,N-dimethylacrylamide (DMA), and (E)-2-(methyl(4-(pyridine-4yldiazenyl)phenyl)amino)ethyl acrylate (MPDEA, M1) were copolymerized via free radical polymerization (FRP) to yield p(BPAm-co-DMA-co-MPDEA), hereafter referred to as P1. P1 exhibits selective sensing properties toward diethyl chlorophosphate (DCP), a nerve agent mimic, in pure aqueous media. Upon the addition of DCP, the pyridine groups of P1 were quaternized with DCP, accompanied by a color change from yellow to pink due to the enhancement of the intramolecular charge transfer (ICT) effect. In situ generated quaternized P1, hereafter referred to as P2, after DCP sensing was used to selectively detect ammonia via dequaternization in an aqueous medium. Ammonia detection was indicated by a color change in the solution from pink back to yellow. A surface-immobilized P1 film was prepared and employed for the vapor-phase detection of DCP, demonstrating that an amount of as low as 2 ppm was detectable. Ammonia vapor was also successfully detected by the P2 film via the ammonia-triggered removal of the quaternized phosphates. Alternating exposure of the film to DCP and ammonia resulted in the corresponding color changes, thereby demonstrating the reversibility of the system. The reusability of the polymeric film for detecting DCP and ammonia in the vapor phase was confirmed by performing four sequential colorimetric detection cycles.

Spectroscopic and Theoretical Investigation of Color Tuning in Deep-Red Luminescent Iridium(III) Complexes

A series of heteroleptic, neutral iridium(III) complexes of the form [Ir(L)2(N^O)] (where L = cyclometalated 2,3-disubstituted quinoxaline and N^O = ancillary picolinate or pyrazinoate) are described in terms of their synthesis and spectroscopic properties, with supporting computational analyses providing additional insight into the electronic properties. The 10 [Ir(L)2(N^O)] complexes were characterized using a range of analytical techniques (including 1H, 13C, and 19F NMR and IR spectroscopies and mass spectrometry). One of the examples was structurally characterized using X-ray diffraction. The redox properties were determined using cyclic voltammetry, and the electronic properties were investigated using UV-vis, time-resolved luminescence, and transient absorption spectroscopies. The complexes are phosphorescent in the red region of the visible spectrum (λem = 633-680 nm), with lifetimes typically of hundreds of nanoseconds and quantum yields ca. 5% in aerated chloroform. A combination of spectroscopic and computational analyses suggests that the long-wavelength absorption and emission properties of these complexes are strongly characterized by a combination of spin-forbidden metal-to-ligand charge-transfer and quinoxaline-centered transitions. The emission wavelength in these complexes can thus be controlled in two ways: first, substitution of the cyclometalating quinoxaline ligand can perturb both the highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital levels (LUMO, Cl atoms on the ligand induce the largest bathochromic shift), and second, the choice of the ancillary ligand can influence the HOMO energy (pyrazinoate stabilizes the HOMO, inducing hypsochromic shifts).

Development of a Column-Shaped Fluorometric Sensor Array and Its Application in Visual Discrimination of Alcohols from Vapor Phase

Portable, miniaturized, and inexpensive detectors are in high demand for detecting and discriminating volatile organic compounds (VOCs). Sensor array design and exploitation are two key issues for new detector development. In contrast to the most reported plane-shaped sensor array for gaseous analyte sensing, here we report a column-shaped fluorometric sensor array by using fluorophore-loaded silica particles (∼40 μm) filled capillary. In the design, the capillary serves as test chamber and facilitates visualization. The orifices of the capillary were used as inlet and outlet for gaseous analyte. Sensing modules are installed in series, which lays foundation for their even and effective contact with the gaseous analyte. Meanwhile, further capsulation could be avoided. Silica particles were chosen as carries due to their preferred adsorption behavior to VOCs. By choosing four typical fluorophores (PBI-CB, Py-CB-Ph, Py-At, and NA-Ch) as sensing units, a 4-element fluorometric sensor array was achieved. Fluorescence of the array varied when different alcohol vapors were pumped in. The six tested alcohols could not only be distinguished as primary, secondary, or tertiary, but also be identified individually. The array had good reproducibility in visualization of the six alcohols. In addition, the orders of the fluorophores can be changed as desired. It is believed that the proofed concept provides not only a totally new design of sensor array but also contributes a new strategy for the discrimination of the alcohols as examined.

Detection Papers with Metal Complexes with Triphenylmethane Dyes for the Detection of G-Series Nerve Agents (Sarin, Soman, Cyclosarin) in the Liquid Phase

The paper presents the results of the study of the possibilities of using color metal complexes to detect the presence of chemical warfare agents (CWA) in liquid or aerosol form. Aluminon/Fe3+ and Eriochrome Cyanine R/Cu2+ coordination complexes and their ability to detect CWA in liquid phase are discussed. Detection systems have been demonstrated on instances of simple detection papers exposed to drops of real CWAs. Detection papers showed a positive response to G-series nerve agents and vesicant lewisite. Other liquid CWA do not interfere and the systems are also resistant to common organic solvents and a wide range of industrial chemicals.