Luminescence Tuning of Layered Rare-Earth Hydroxides (LRHs, R = Tb, Y) Composites with 3-Hydroxy-2-naphthoic Acid and Application to the Fluorescent Detection of Al3

Dual excitation channel ratiometric fluorescent probes for visual and fluorescent detection of anthrax spore biomarker and tetracycline hydrochloride

Long-term and excessive use of tetracycline hydrochloride (TC) can lead to its accumulation in the environment, which can cause water contamination, bacterial resistance, and food safety problems. 2,6-Pyridine dicarboxylic acid (DPA) is a major biomarker of Bacillus anthracis spores, and its rapid and sensitive detection is of great significance for disease prevention and counter-terrorism. A bifunctional ratiometric fluorescent nanoprobe has been fabricated to detect DPA and TC. 3,5-dicarboxyphenylboronic acid (BOP) was intercalated into layered europium hydroxide (LEuH) by the ion-exchange method and exfoliated into nanosheets as a fluorescent nanoprobe (PNP). DPA and TC could significantly enhance the red fluorescence of Eu3+ through the antenna effect under different excitation wavelengths, while the fluorescence of BOP can be used as a reference based on the constant emission intensity, realizing ratiometric detection. A low limit of detection (LOD) for the target (DPA: 9.7 nM, TC: 21.9 nM) can be achieved. In addition, visual detection of DPA and TC was realized using color recognition software based on the obvious color changes. This is the first ratiometric fluorescent nanoprobe based on layered rare-earth hydroxide (LRH) for the detection of DPA and TC simultaneously, which opens new ideas in the design of multifunctional probes.

Fabrication, spectroscopic and photofunctional studies of layered lutetium-dysprosium hydroxides

The spectroscopic studies of layered rare-earth hydroxides (LRHs) have aroused great interests owing to the unique features of combing rare-earth ions with diverse anions. In this work, some anions were incorporated into layered lutetium-dysprosium hydroxides (LLuH:Dy) by the hydrothermal and ion exchange process, in which Dy3+ ion acted as the emission center. The results manifest that the assemblies possess clearly lamellar structure and flake shape, and emit the characteristic yellow and blue light of Dy3+ under ultraviolet excitation. The inorganic WO42- intercalated LLuH:Dy shows enhanced luminescence under the excitation with 280 nm which originates from the O-W charge transfer band. The more fantastic is that the assembly produces bright cyan light due to the appropriate yellow/blue light intensity ratio, and can transform into transparent and flexible film by mixing with certain polymer. Moreover, the intercalation of organic chromophore benzenetetracarboxylic anion into LLuH:Dy also greatly promotes the Dy3+ luminescence, and can easily form the nanosheet colloid through combining with surfactant dodecyl sulfonate. The colloid is very stable at ambient temperature and displays excellent selectivity, sensitivity and accuracy for detecting metal Co2+ in aqueous media, constructing a superior fluorescence sensor for Co2+ with a detection limit of 2.65 × 10-7 mol/L. This work expands the photofunctional performances of LRHs in the form of transparent film and colloidal state.

A smartphone-intergrated dual-emission fluorescent nanoprobe for visual and ratiometric detection of anthrax biomarkers

A novel dual-emission fluorescent nanoprobe based on rare-earth nanosheets was fabricated to detect 2,6-pyridine dicarboxylic acid (DPA), which is the biomarker of Bacillus anthracis. 2-amino terephthalic acid (BDC-NH2) and surfactant sodium dodecyl sulfate (SDS) were co-intercalated into layered europium hydroxide (LEuH) to prepare the organic/inorganic composite, which was delaminated to obtain the rare-earth nanosheets. The ratio detection of DPA is possible due to the antenna effect between DPA and Eu3+. The nanoprobe shows high accuracy and sensitivity due to the large specific surface area of the rare-earth nanosheets. The limit of detection (LOD) is 4.4 nM for DPA in the range of 0-20 μM. In addition, a more convenient and faster smartphone-based visual detection platform was established based on the obvious color change. This work offers an effective way for developing visual sensing platforms, which opens a new path for designing fluorescent probes with superior sensing capabilities.

Fabrication of a ratiometric fluorescence nanoprobe for detecting tryptophan enantiomers

A novel ratiometric fluorescence nanoprobe was developed to detect tryptophan enantiomers with high selectivity and sensitivity. Fluorescein (FL) was doped into SiO2 nanoparticles with little dye leakage, acting as an internal reference signal. The chiral center of L-histidine (L-His) was introduced by partially replacing the carboxyl on the surface of SiO2. The response signal of Eu3+ was coordinated with carboxyl to obtain the FL@SiO2-Eu/His nanoprobe. The nanoprobe shows enantioselective luminescence responses for tryptophan enantiomers. The red emission of Eu3+ can be effectively quenched by the tryptophan enantiomers, but the quenching efficiency is different due to the different interactions with the chiral recognition sites. The fluorescence intensity ratio (I613/I515) shows excellent linearity with tryptophan enantiomers in the range of 0-100 μM (R2 > 0.99). The limit of detection (LOD) is 1.0 μM and 1.3 μM for L-tryptophan (L-Trp) and D-tryptophan (D-Trp), respectively. The FL@SiO2-Eu/His nanoprobe shows good selectivity and specific recognition in serum actual samples. In addition, the nanoprobe can realize visual detection under UV light due to the obvious color change. This work provides an innovative idea for the development of new probes in the detection field.

Fluorescence on and off sensing platform based on europium nanosheets for the detection of DPA and Cu2+ ions

With the development of society, the modern environment has put forward higher requirements for analysis and detection. This work proposes a new strategy for the construction of fluorescent sensors based on rare-earth nanosheets. Organic/inorganic composites were obtained by the intercalation of 4,4'-stilbene dicarboxylic acid (SDC) into layered europium hydroxide, and then the composites were exfoliated to form nanosheets. Taking advantage of the fluorescence emission characteristics of SDC and Eu³⁺, a ratiometric fluorescent nanoprobe was constructed, which realized the detection of dipicolinic acid (DPA) and Cu²⁺ in the same system. With the addition of DPA, the blue emission of SDC gradually decreased and the red emission of Eu³⁺ gradually increased, when Cu²⁺ was added, the emission of SDC and Eu³⁺ were gradually weakened. The experimental results showed that the ratio of fluorescence emission intensity (I₆₁₉/I₃₉₄) of the probe had a positive linear relationship with the concentration of DPA, and a negative linear relationship with the concentration of Cu²⁺, thus realizing the high sensitivity detection of DPA and a wide detection range of Cu²⁺. In addition, this sensor also exhibits potential visual detection possibilities. This is a multifunctional fluorescent probe that provides a novel and efficient method for the detection of DPA and Cu²⁺, which broadens the application field of rare-earth nanosheets.

A core-shell structure ratiometric fluorescent probe based on carbon dots and Tb3+ for the detection of anthrax biomarker

A novel core-shell structure ratiometric fluorescent probe was developed, which can selectively and sensitively detect 2,6-dipicolinic acid (DPA) as an anthrax biomarker. Carbon dots (CDs) was embedded into SiO₂ nanoparticles, which was acted as an internal reference signal. Tb³⁺ with green emission was connected to the carboxyl functionalized SiO₂, which was acted as a responsive signal. With the addition of DPA, the emission of CDs at 340 nm was unchanged, while the fluorescence of Tb³⁺ at 544 nm was enhanced by the antenna effect. In the concentration range of 0.1-2 μM, the fluorescence intensity ratio of I₅₄₄/I₃₄₀ showed a good linear relationship with the concentration of DPA, and the limit of detection (LOD) was 10.2 nM. In addition, the dual-emission probe showed an obvious fluorescence color change from colourless to green with increasing DPA under UV light, which enabled visual detection.

Spectroscopic properties and fluorescent recognition of dye sensitized layered lutetium-terbium hydroxides

The layered rare earth hydroxides have attracted increasing interests due to their diverse chemical composition and tunable spectroscopic properties. In this paper, a novel Tb³⁺ activated layered lutetium hydroxide (LLuH:Tb) was fabricated, in which the inorganic NO₃^- ions were ion-exchanged with organic (ibuprofen or dodecylsulfonate) anions. After the ion-exchange reaction, the organic anions intercalated LLuH:Tb showed the distinct lamellar structure with the interlayer distance of about 2.56 nm, confirming the formation of inorganic/organic hybrid assembly. The dye ibuprofen-intercalated hybrid effectively promoted the characteristic ⁵D₄ → ⁷F₅ green emission of Tb³⁺ in the host but failed to be exfoliated into nanosheet colloid. On the contrary, the dodecylsulfonate-intercalated hybrid was readily to be exfoliated into nanosheet colloid by dissolving in formamide solvent, but the green emission of Tb³⁺ was too weak to be observed. To take advantage of their respective merits and explore the practical uses, certain amounts of dye ibuprofen were directly added to the dodecylsulfonate-intercalated hybrid colloid. Excited with the ultraviolet light, the characteristic green fluorescence of Tb³⁺ was dramatically enhanced, indicating that the dye was a superior light-harvesting antenna to sensitize the activator Tb³⁺. The dye sensitized hybrid colloid was very stable at ambient temperature and exhibited excellent fluorescent recognition for Cu²⁺ ions over other metal ions in aqueous solution due to the large fluorescence quenching. The detection limit for Cu²⁺ ion reaches 7.63 × 10^-7 mol/L, which is far lower than the limitation of Cu²⁺ in drinking water recommended by the World Health Organization (1.57 × 10^-5 mol/L). The fluorescence enhanced/quenched sensor with excellent stability exhibits a high potential for the detection of Cu²⁺ in routine environmental water.

Rare-Earth hydroxide nanosheets based ratio fluorescence nanoprobe for dipicolinic acid detection

We demonstrate a novel ratio fluorescence nanoprobe for dipicolinic acid (DPA) as an anthrax biomarker based on layered rare-earth hydroxide (LRH). 3-Amino-benzenesulfonic acid (AS) was intercalated into layered terbium hydroxide to form composite and then delaminated into nanosheets in formamide. The monolayer nanosheets were beneficial to expose the Ln³⁺ luminescence centers to the environment more completely, contributing a high sensitive detection to the environment. With the increase of DPA concentration, the emission intensity of AS kept constant which worked as a stable internal reference, while the fluorescence of Tb³⁺ was enhanced obviously due to the antenna effect. In the 0.05-5.0 μM concentration range, the I₅₄₄/I₃₆₀ fluorescence ratio changed with the DPA concentration, which exhibited a good linear relationship (R² = 0.999) and an ultralow detection limit of 3.8 nM. In addition, the probe showed high selectivity and sensitivity to the DPA detection as an anthrax biomarker, which can be applied in real tap water with good performances. This work could extend the applications of LRH nanosheets in detection and offer an extremely effective and easy technique for detecting DPA.

Specific lift-up behaviour of acetate-intercalated layered yttrium hydroxide interlayer in water: application for heterogeneous Brønsted base catalysts toward Knoevenagel reactions

The basal (00l) plane of acetate-intercalated layered yttrium hydroxide (CH3COO−/Y-LRH), synthesised by an anion exchange using Cl−/Y-LRH as a parent material, increased in water, and the lifted-up layered structure was generated immediately.

Highly efficient capture of uranium from seawater by layered double hydroxide composite with benzamidoxime

Through swelling/restoration reaction, benzamidoxime (BAO) is introduced into MgAl-LDH interlayers to assemble a new composite of MgAl-BAO-LDH (abbr. BAO-LDH). Wet samples of the BAO-LDH obtained by washing with diverse solvents are present in colloidal state, which facilitates the fabrication of thin film adsorbents convenient for actual application. After drying, the assembled sample exhibits floral morphology composed of thin nanosheets, much different from hexagonal morphology of NO₃^- intercalated MgAl-LDH precursor (NO₃-LDH), demonstrating a phenomenon rarely found in swelling/restoration. The BAO-LDH depicts an extremely large maximum sorption capacity (q_m^U) of 327 mg·g^-1 and ultra-high selectivity for U. At low U concentrations (5-10 ppm), nearly complete capture (~100%) is achieved in a wide pH range of 3-11, while at high U concentrations (110 ppm), quite high U removals (≥93.0%) are obtained at pH = 6-8, meaning perfect suitability for trapping U from seawater. For natural seawater containing trace amounts of U (3.93 ppb) coexisting with high concentration of competitive ions, the BAO-LDH displays significantly high U removal (87%). Complexation between interlayer BAO (N and O as ligands) with UO₂²⁺ and synergistic interactions of LDH layer hydroxyls with UO₂²⁺ contribute to the highly effective uranium capture. All results demonstrate the BAO-LDH is a promising adsorbent applied in seawater uranium extraction and nuclear wastewater disposal.

Study of the spectroscopic properties and deprotonation of 6-bromo-2-naphthoic acid

The present work studies the UV-Vis spectroscopic properties of 6-bromo-2-naphthoic acid (BNA) dissolved in methanol, tetrahydrofuran (THF) and ethyl acetate. It has been found that there are significant differences between the emission spectra for the samples with different concentrations of BNA in methanol. Also, the analogical changes have been observed in the case of the samples of BNA in THF and ethyl acetate which have been studied immediately after preparation and 24 h after preparation. It could be explained by deprotonation processes that take place in BNA. Moreover, it has been found that the anion formation process in BNA is more intensive in the case of methanol solvent in comparison with the cases of THF and ethyl acetate. This fact could be explained by the different polarity of these solvents. As methanol is characterized by higher polarity, the deprotonation is more intensive in the case of this solvent. To verify our assumption the quantum-chemical calculations have been also performed. It has been found that the enthalpy of dissociation (the bond-dissociation energy) is equal to 183.2, 200.2 and 205.4 kcal/mol for BNA dissolved in methanol, THF and ethyl acetate, respectively. It explains why the deprotonation process in methanol is more intensive than in THF and ethyl acetate. Thereby, the study shows that the obtained theoretical calculations are in good agreement with the experimental results.

SDC/OS-LDH composite for highly sensitive fluorescence detection of Fe3+ at a much lower concentration

The significantly quenched luminescence of delaminated SDC/OS-LDH when contacted with Fe³⁺ can sensitively detect trace amounts of Fe³⁺.