Proton Conductivity and Sorption Study in Three Sulfonic Group Functionalized Mixed Ligand Coordination Polymers and the Impact of Structural Dynamicity on Their Property

Hydrogen-Bonded Metal-Organic Framework Nanosheet as a Proton Conducting Membrane for an H2/O2 Fuel Cell

Proton-conducting metal-organic frameworks (MOFs) have attracted attention as potential electrolytes for fuel cells. However, research progress in utilizing MOFs as electrolytes for fuel cells has been limited, mainly due to challenges associated with issues such as the fabrication of MOF membranes, and hydrogen crossover through the MOF's pores. Here, proton conductivity and fuel cell performance of a self-standing membrane prepared from of a bismuth subgallate MOF nanosheets with non-porous structure are reported. The fabricated MOF nanosheet membrane with no binding agent exhibits structural anisotropy. The proton conductivity in the membrane thickness direction (4.4 × 10-3 S cm-1) at 90 °C and RH 100% is observed to be higher than that in the in-plane direction of the membrane (3.3 × 10-5 S cm-1). The open circuit voltage (OCV) of a fuel cell with ≈120 µm proton conducting membrane is 1.0 V. The non-porous nature of the MOF nanosheets contributes to the relatively high OCV. A fuel cell using ≈40 µm membrane as proton conducting electrolyte records a maximum of 25 mW cm-2 power density and a maximum of 109 mA cm-2 current density with 0.91 V OCV at 80 °C in humid conditions.

Interfacial Water Molecules as Agents for Phase Change Control and Proton Conductivity Enhancement in the Ammonium Vanadyl Tartrate System

This study demonstrates the reversible structural transformation, single-crystal-to-single-crystal, of the ammonium vanadyl (L-tartrate) complex salt from the hydrate phase to the anhydrous phase. The transformation can be initiated by stimuli, such as temperature, humidity, or vacuum conditions. The hydrate and anhydrous phases exhibit a tetragonal structure (P41212), with marked differences in hydrogen bonding due to the presence or absence of one water molecule per asymmetric unit. The intricate relationship between crystal packing and intermolecular interactions in the hydrate phase was investigated by crystallographic charge density analysis revealing, at the molecular level, the reasons for the observed 5 orders of magnitude higher proton conductivity of the hydrate phase compared to that of the anhydrous phase. To gain further insight into the processes occurring at the surfaces of grain boundaries and the proton transfer mechanisms in this system, rehydration of the complex salt was carried out by using D2O instead of H2O and monitored by in situ ATR-FTIR spectroscopy. The results highlight the critical role of interfacial water molecules in driving structural transformations and influencing proton conductivity.

Mechanochemical Synthesis of Phosphonate-Based Proton Conducting Metal-Organic Frameworks

Water-stable metal-organic frameworks (MOFs) with proton-conducting behavior have attracted great attention as promising materials for proton-exchange membrane fuel cells. Herein, we report the mechanochemical gram-scale synthesis of three new mixed-ligand phosphonate-based MOFs, {Co(H₂PhDPA)(4,4'-bipy)(H₂O)·2H₂O}_n (BAM-1), {Fe(H₂PhDPA)(4,4'-bipy) (H₂O)·2H₂O}_n (BAM-2), and {Cu(H₂PhDPA)(dpe)₂(H₂O)₂·2H₂O}_n (BAM-3) [where H₂PhDPA = phenylene diphosphonate, 4,4'-bipy = 4,4'-bipyridine, and dpe = 1,2-di(4-pyridyl)ethylene]. Single-crystal X-ray diffraction measurements revealed that BAM-1 and BAM-2 are isostructural and possess a three-dimensional (3D) network structure comprising one-dimensional (1D) channels filled with guest water molecules. Instead, BAM-3 displays a 1D network structure extended into a 3D supramolecular structure through hydrogen-bonding and π-π interactions. In all three structures, guest water molecules are interconnected with the uncoordinated acidic hydroxyl groups of the phosphonate moieties and coordinated water molecules by means of extended hydrogen-bonding interactions. BAM-1 and BAM-2 showed a gradual increase in proton conductivity with increasing temperature and reached 4.9 × 10^-5 and 4.4 × 10^-5 S cm^-1 at 90 °C and 98% relative humidity (RH). The highest proton conductivity recorded for BAM-3 was 1.4 × 10^-5 S cm^-1 at 50 °C and 98% RH. Upon further heating, BAM-3 undergoes dehydration followed by a phase transition to another crystalline form which largely affects its performance. All compounds exhibited a proton hopping (Grotthuss model) mechanism, as suggested by their low activation energy.

Four series of lanthanide coordination polymers based on the tetrabromobenzene-1,4-dicarboxylate ligand: structural diversity and multifunctional properties

Four series of lanthanide-based coordination polymers (LnCPs), namely [Ln(Br₄bdc)_1.5(MeOH)₃] (1Ln; Ln = Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy), [Ln₂(Br₄bdc)₂(NO₃)₂(MeOH)₄] (2Ln; Ln = Ce, Pr, Nd, Sm), [Ln(Br₄bdc)(NO₃)(MeOH)] (3Ln; Ln = Gd, Tb, Dy), and [Ln₂(Br₄bdc)₃(H₂O)_2.3(MeOH)_2.7] (4Ln; Ln = Gd, Tb, Dy) have been synthesized by reacting hydrated lanthanide(III) salts with tetrabromobenzene-1,4-dicarboxylic acid (H₂Br₄bdc) in different solvents under solvothermal conditions. The structural diversity found in the system mainly resulted from the effects of anions, solvents, and the variation in the ionic radii of the lanthanide(III) ions. Compounds in series 1Ln feature a two-dimensional (2D) layered structure with sql topology based on {(Ln(COO)₂)₂(μ-COO)₂} secondary building units (SBUs). Compounds in series 2Ln and 3Ln comprise, respectively, infinite uniform and alternate chains of {Ln(COO)₂}_n SBUs that are assembled into a similar network topology to 1Ln. Meanwhile, compounds in series 4Ln feature 3D coordination networks of a pcu α-Po topological net consisting of binuclear {Ln₂(COO)₃} SBUs. The formation of polymeric networks in series 1Ln-4Ln is facilitated by the numerous coordination sites of the ligand Br₄bdc^2- and the fact that its bromine atoms can participate in the formation of various types of intermolecular interactions. The solid-state photoluminescence studies on Eu- (1Eu) and Tb- (1Tb, 3Tb, 4Tb) containing compounds indicate that the Br₄bdc^2- ligands can efficiently sensitize Eu³⁺ and Tb³⁺ emission. Notably, such compounds exhibit highly sensitive fluorescence sensing for acetone, water, and Fe³⁺ ions via the fluorescence quenching effect. As the representatives of the series, activated 1Eu, 2Pr, 3Tb, and 4Tb show the maximum CO₂ uptake capacities of 170.4, 273.7, 255.3, and 303.5 cm³ g^-1, respectively, at 50 bar and 298 K with good repeatability of the adsorption-desorption properties. Magnetic studies indicate that the Gd- and Dy-based compounds 1Gd, 1Dy, 3Gd, 3Dy, and 4Gd show simple paramagnetic behaviours, whereas compound 4Dy exhibits weak ferromagnetic interactions.

Design and synthesis of new luminescent coordination networks of topology showing the highest degrees of interpenetration

The highest degree of interpenetration reported so far of 7- and 8-fold is realized in two luminescent sql 2D networks by self-assembly of a new nanometric-sized ligand with Ag(i) salts.

Zero area thermal expansion of honeycomb layers via double distortion relaxation in (PPh4)[Cu2(CN)3]

The zero area TE of cyanide-bridged honeycomb layers occurs by complementary structural changes in the cation and anion counterparts.

An experimental and theoretical exploration of supramolecular interactions and photoresponse properties of two Ni(ii) complexes

Two new nickel(ii) complexes, C₃₂H₂N₈NiClO₉ (1) and C₃₆H₂₈N₁₂NiOF₂₄P₄ (2) are reported. The noncovalent interactions witnessed in their crystal packing have been analysed using DFT calculations.

Proton-Conductive Coordination Polymers Based on Diphenylsulfone-3,3'-disulfo-4,4'-dicarboxylate with Well-Defined Hydrogen Bonding Networks

The diphenylsulfone-3,3'-disulfo-4,4'-dicarboxylic acid (H₄-DPSDSDC) ligand and its coordination polymers, [K₂Zn(C₁₄H₆S₃O₁₂)(H₂O)₄]_n (1) and {[Cu₃(μ₃-OH)₂(C₁₄H₆S₃O₁₂)(H₂O)₃(DMF)]·3(H₂O)}_n (2) (C₁₄H₆S₃O₁₂ = diphenylsulfone-3,3'-disulfo-4,4'-dicarboxylate), were synthesized. The Zn(H₂O)₄ units in 1 are connected by DPSDSDC^4- ligands to generate a one-dimensional (1D) chain, which is bridged by K-O bonds associated with bridging water molecules and sulfonate groups to yield a two-dimensional (2D) layer. In 2, the 1D hydroxyl-bridging Cu(II) chains are connected by DPSDSDC^4- ligands to give a 2D layer. The 2D layers in 1 and 2 are further connected by interlayered hydrogen bonds to give three-dimensional (3D) frameworks. Compounds 1 and 2 have good conductivities of 1.57 × 10^-4 and 5.32 × 10^-5 S cm^-1, respectively. Continuous well-defined hydrogen bonding networks associated with water molecules, sulfonate groups, and carboxylate groups were observed in compounds 1 and 2. Such hydrogen bonding networks provide hydrophilic domains and effective transfer pathways for protons. Here, we present elegant examples of a precise determination of the pathways for proton transport.

From an organic ligand to a metal–organic coordination polymer, and to a metal–organic coordination polymer–cocrystal composite: a continuous promotion of the proton conductivity of crystalline materials

A new strategy was proposed to increase proton conductivities in metal–organic coordination polymers (MOCPs) commencing from organic ligands, i.e. coordination inducement and MOCP–cocrystal composite formation.