A Microporous Metal–Organic Framework Catalyst for Solvent-free Strecker Reaction and CO2 Fixation at Ambient Conditions

Synthesis of UiO-66-Pyca-CuO by a Simple and Novel Method: MOF-based Metal Thin Film as Heterogeneous Catalysts for the Synthesis of α-Aminonitriles

Metal-organic frameworks (MOFs), particularly UiO-66-NH2, are employed as catalysts in many industrial catalyst applications. As converting catalysts into thin film significantly increases their catalytic properties, we report a general approach to synthesizing MOF thin films (UiO-66-Pyca-CuO). First, functionalization of UiO-66-NH2 was done with 3-pyridine carboxaldehyde by the postsynthesis method, and then, UiO-66-Pyca was entangled on the surface of copper oxide nanoparticles with a modern strategy (MOF thin film). The morphology and structure of the synthesized UiO-66-Pyca-CuO were determined by using X-ray diffraction, Fourier transform infrared, field-emission scanning electron microscopy, energy-dispersive analysis of X-ray, inductively coupled plasma-mass spectrometry, elemental analyses of CHNOS, temperature-programmed desorption of ammonia, Brunauer-Emmett-Teller, and X-ray photoelectron spectroscopy. We studied the catalytic action of the UiO-66-Pyca-CuO thin film in the synthesis of α-aminonitriles via Strecker reaction. Our studies show that this catalysis can be a suitable catalyst in the synthesis of α-aminonitriles because of having advantages such as using the solvent being environmentally friendly, easy separation of the catalyst (only by picking up the MOF thin film from inside the solution), the reaction at room temperature, high yield, and reusability.

Two-Dimensional Cu(II)-MOF with Lewis Acid-Base Bifunctional Sites for Chemical Fixation of CO2 and Bioactive 1,4-DHP Synthesis via Hantzsch Condensation

Five- and six-membered heterocycles containing nitrogen or oxygen have been considered as privileged scaffolds in organic chemistry and the chemical industry because of their usage in high-value commodities. Herein, we report a two-dimensional (2D) Cu(II)-based MOF catalyst, IITKGP-40, via the strategic employment of ample Lewis acid-base bifunctional sites (open metal nodes and free pyrazine moieties) along the pore wall. IITKGP-40 could convert toxic CO2 to cyclic carbonates in an atom-economical manner under solvent-free conditions and aromatic aldehyde to bioactive 1,4-DHPs via Hantzsch condensation. Exceptional catalytic performance (99%) and turnover number under mild reaction conditions for CO2 fixation using sterically hindered styrene oxide, and good-to-excellent yields for a wide range of aromatic aldehydes toward 1,4-dihydropyridines (1,4-DHPs) make IITKGP-40 promising as a multipurpose heterogeneous catalyst. Moreover, to demonstrate the practical utility of the catalyst, two biologically important drug molecules, diludine and nitrendipine analogue, have also been synthesized. IITKGP-40 is recyclable for at least three consecutive runs without significant loss of activity, making it promising for real-time applications.

Covalent organic frameworks (COFs) and metal-organic frameworks (MOFs) as electrochemical sensors for the efficient detection of pharmaceutical residues

Pharmaceutical residues are the undecomposed remains from drugs used in the medical and food industries. Due to their potential adverse effects on human health and natural ecosystems, they are of increasing worldwide concern. The acute detection of pharmaceutical residues can give a rapid examination of their quantity and then prevent them from further contamination. Herein, this study summarizes and discusses the most recent porous covalent-organic frameworks (COFs) and metal-organic frameworks (MOFs) for the electrochemical detection of various pharmaceutical residues. The review first introduces a brief overview of drug toxicity and its effects on living organisms. Subsequently, different porous materials and drug detection techniques are discussed with materials' properties and applications. Then the development of COFs and MOFs has been addressed with their structural properties and sensing applications. Further, the stability, reusability, and sustainability of MOFs/COFs are reviewed and discussed. Besides, COFs and MOFs' detection limits, linear ranges, the role of functionalities, and immobilized nanoparticles are analyzed and discussed. Lastly, this review summarized and discussed the MOF@COF composite as sensors, the fabrication strategies to enhance detection potential, and the current challenges in this area.

Two Zn(II)/Cd(II) Coordination Polymers as Recyclable Heterogeneous Catalysts for an Efficient Room-Temperature Synthesis of α-Aminonitriles via the Solvent-Free Strecker Reaction

The α-aminonitriles are versatile building blocks in the synthesis of natural or artificial amino acids as well as important intermediates in organic synthesis. For their synthesis, the three-component Strecker reaction involving an aldehyde or a ketone together with amines and trimethylsilyl cyanide is used. In the literature, hydrothermally produced metal-based heterogeneous Lewis acid catalysts have been utilized in various solvents. In this work, we aimed at a greener approach toward such catalysis by (a) making two precatalysts with d¹⁰ metal centers, {[Zn(hipamifba)(H₂O)]·2H₂O}_n (1) and {[Cd(hipamifba)(H₂O)₂]·2H₂O}_n (2) (where H₂hipamifba = 4-(((4-((carboxymethyl) carbamoyl)phenyl)amino)methyl)benzoic acid), via an easy and scalable room-temperature method, and (b) showcasing the use of these coordination polymers (CPs) as very efficient, recyclable, and heterogeneous catalysts for the Strecker reaction to form α-aminonitriles in high yields under solvent-free reaction at ambient conditions. This has also allowed us to demonstrate the importance of open metal sites in such catalysis through an efficiency comparison between activated 1 and 2. In addition, activated 2 exhibited a wide substrate scope including a natural product Girgensohnine, providing an example of a natural product synthesis by a CP catalyst via an organic transformation such as the Strecker reaction.

Atomically Dispersed Iron Sites on the Hollow Nitrogen-Doped Carbon Framework with a Highly Efficient Performance on Carbon Dioxide Cycloaddition

The exploration of efficient and low-consumption catalysts for carbon dioxide (CO₂) conversion is desirable yet remains a great challenge. Herein, a novel catalyst composed of a hollow nitrogen-doped carbon framework (HNF) enriched with high-loading (9.8 wt %) atomically dispersed iron sites (defined as Fe_SAs/HNF) has been fabricated by a polymer-assisted strategy. As a result, Fe_SAs/HNF has an excellent performance on the cycloaddition reactions of CO₂ with epoxides (the conversion >96%) under milder conditions because of its ultrahigh loading of atomically dispersed iron sites. This study not only provides an advanced catalyst for driving CO₂ cycloaddition but also furnishes a novel perspective on the rational design of superior catalysts with high-loading active sites for diverse heterogeneous catalytic reactions.

Effective Dual-Functional Metal-Organic Framework (DF-MOF) as a Catalyst for the Solvent-Free Cycloaddition Reaction

A new porous metal-organic framework, [Co (oba) (bpdh)]·(DMF) (TMU-63), containing accessible nitrogen-rich diazahexadiene groups was successfully prepared with the solvothermal assembly of 5-bis(4-pyridyl)-3,4-diaza-2,4-hexadiene (4-bpdh), 4,4'-oxybis(benzoic) acid (oba), and Co(II) ions. The combination of Lewis basic functional groups and porosity leads to high performance in CO₂ adsorption and conversion in the cycloaddition reaction of epoxides under solvent-free conditions. To further enhance the catalytic efficiency of TMU-63, we introduced a highly acidic malonamide ligand into the structure via solvent-assisted ligand exchange (SALE) as a postsynthesis method. Incorporating different percentages of N¹,N³-di(pyridine-4-yl) malonamide linker (4-dpm) into TMU-63 created a new porous structure. Powder X-ray diffraction (PXRD) and NMR spectroscopy confirmed that 4-bpdh was successfully replaced with 4-dpm in the daughter MOF, TMU-63S. The catalytic activity of both MOFs was confirmed by significant amounts of CO₂ cycloaddition of epoxides under solvent-free conditions. The catalytic cycloaddition activities were found to be well-correlated with the Lewis base/Brønsted acid distributions of the materials examined in the TMU-63S series, showing that the concurrent presence of both acid and base sites was desirable for high catalytic activity. Furthermore, the heterogeneous catalysts could easily be separated out from the reaction mixtures and reused four times without loss of catalytic activity and with no structural deterioration.

Effect of Unsaturated Metal Site Modulation in Highly Stable Microporous Materials on CO2 Capture and Fixation

We have designed and synthesized two unprecedented microporous three-dimensional metal-organic frameworks, {[Cd₆(TPOM)₃(L)₆]·12DMF·3H₂O}_n (1) and {[Zn₂(TPOM)(L)₂]·2DMF·H₂O}_n (2), based on a flexible quadritopic ligand, tetrakis(4-pyridyloxymethylene)methane (TPOM), and a bent dicarboxylic acid, 4,4'-(dimethylsilanediyl)bis-benzoic acid (H₂L). The networks of 1 and 2 share a 4-c uninodal net NbO topology but exhibit different metal environments due to coordination preferences of Cd(II) and Zn(II). The Cd(II) center in 1 is six-coordinated, whereas the Zn(II) center in 2 is only four-coordinated, making the latter an unsaturated metal center. Such modulation of coordination atmosphere of metal centers in MOFs with the same topology is possible due to diverse binding of the carboxylate groups of L^2-. Both 1 and 2 have relatively high thermal stability and exhibit permanent porosity after the removal of guest solvent molecules based on variable temperature powder X-ray diffraction and gas adsorption analysis. These materials exhibit similar gas adsorption properties, especially highly selective CO₂ uptake/capture over other gases (N₂ and CH₄). However, because of the presence of an unsaturated Lewis acidic metal site, 2 acts as a very efficient heterogeneous catalyst toward the chemical conversion of CO₂ to cyclic carbonates under mild conditions, whereas 1 shows very less activity. This work provides experimental evidence for the postulate that an unsaturated metal site in MOFs enhances adsoprtion of CO₂ and promotes its conversion via the Lewis-acid catalysis.

Metal-assisted synthesis of salen-based porous organic polymer for highly efficient fixation of CO2 into cyclic carbonates

A series of metal–salen-based porous organic polymers was synthesized using a simple metal-assisted synthetic method, among which Co-salen-POP exhibited highly efficient performance in the fixation of CO2 into cyclic carbonates.

Indium-Organic Framework with soc Topology as a Versatile Catalyst for Highly Efficient One-Pot Strecker Synthesis of α-aminonitriles

An In(III) based metal-organic framework (MOF), In-pbpta, with soc topology was constructed from the trigonal prismatic [In3(μ3-O)(H2O)3(O2C-)6] secondary building unit (SBU) and a custom-designed tetratopic linker H4pbpta (pbpta = 4,4',4″,4‴-(1,4-phenylenbis(pyridine-4,2,6-triyl))-tetrabenzoic acid)). The obtained MOF shows a Brunauer-Emmett-Teller surface area of 1341 m2/g with a pore volume of 0.64 cm3/g, which is the highest among the scarcely reported In-soc-MOFs. The constructed MOF demonstrates excellent performance as a heterogeneous Lewis acid catalyst for highly efficient conversion in a one-pot multicomponent Strecker reaction for the preparation of α-aminonitriles under solvent-free conditions, which can be easy to separate and recycle without significant loss of activity for up to seven cycles. The computational modeling studies suggest the presence of the three substrates in close vicinity to the In-oxo cluster. The strong interactions of the aldehyde/ketone and the amine with the In-oxo cluster together with the readily available cyanide ion around the In-oxo cluster lead to high catalytic conversion within a short period of time for the MOF catalyst. Our work therefore lays a foundation to develop MOF as a new class of efficient heterogeneous catalyst for one-pot Strecker reaction.

Nanochannel {InZn}-Organic Framework with a High Catalytic Performance on CO2 Chemical Fixation and Deacetalization-Knoevenagel Condensation

The rare combination of In^III 5p and Zn^II 3d in the presence of a structure-oriented TDP^6- ligand led to a robust hybrid material of {(Me₂NH₂)[InZn(TDP)(OH₂)]·4DMF·4H₂O}_n (NUC-42) with the interlaced hierarchical nanochannels (hexagonal and cylindrical) shaped by six rows of undocumented [InZn(CO₂)₆(OH₂)] clusters, which represented the first 5p-3d nanochannel-based heterometallic metal-organic framework. With respect to the multifarious symbiotic Lewis acid-base and Brønsted acid sites in the high porous framework, the catalytic performance of activated NUC-42a upon CO₂ cycloaddition with styrene oxide was evaluated under solvent-free conditions with 1 atm of CO₂ pressure, which exhibited that the reaction could be well completed at ambient temperature within 48 h or at 60 °C within 4 h with high yield and selectivity. Moreover, because of the acidic function of metal sites and a central free pyridine in the TDP^6- ligand, deacetalization-Knoevenagel condensation of acetals and malononitrile could be efficiently facilitated by an activated sample of NUC-42a under lukewarm conditions.

Three Resorcin[4]arene-Based Two-Dimensional Zn(II) Supramolecular Isomers Synthesized via a Structure-Directing Strategy for Knoevenagel Condensation

Herein, in the presence of three structure-directing agents (SDAs), a family of imidazole-functionalized resorcin[4]arene-based coordination polymers (CPs), [Zn(TIC4R)(HCOO)]·HCOO·0.5DMF·1.5H₂O (1), [Zn(TIC4R)(CN)]·HCOO·DMF·2.5H₂O (2), and [Zn(TIC4R)(H₂O)]·2HCOO·2H₂O (3), were assembled under solvothermal conditions [TIC4R = tetra(imidazole) resorcin[4]arene]. 1 exhibits a double-layer structure with rectangle windows, and 2 and 3 display monolayer structures. The layers of CPs 2 and 3 are slides with different offsets along the a-axis. In addition, three CPs were used as catalysts to catalyze Knoevenagel condensations. Strikingly, all CPs exhibit remarkable catalytic performance for several substrates. To the best of our knowledge, this is the first time that a small organic acid as SDA was used in the syntheses of resorcin[4]arene-based supramolecular isomers.

Fluorine-Containing Triazole-Decorated Silver(I)-Based Cationic Metal-Organic Framework for Separating Organic Dyes and Removing Oxoanions from Water

Four new triazole-decorated silver(I)-based cationic metal-organic frameworks (MOFs), {[Ag(L1)](BF₄)}_n (1), {[Ag(L1)](NO₃)}_n (2), {[Ag(L2)](BF₄)}_n (3), and {[Ag(L2)](NO₃)}_n (4), have been synthesized using two newly designed ligands, 3-fluoro-5-(4H-1,2,4-triazol-4-yl)pyridine (L1) and 3-(4H-1,2,4-triazol-4-yl)-5-(trifluoromethyl)pyridine (L2). When the fluorine atom was changed to a trifluoromethyl group at the same position, tremendous enhancement in the MOF dimensionality was achieved [two-dimensional to three-dimensional (3D)]. However, changing the metal salt (used for the synthesis) had no effect. The higher electron-withdrawing tendency of the trifluoromethyl group in L2 aided in the formation of higher-dimensional MOFs with different properties compared with those of the fluoro derivatives. The fluoride group was introduced in the ligand to make highly electron-deficient pores inside the MOFs that can accelerate the anion-exchange process. The concept was proved by density functional theory calculation of the MOFs. Both 3D cationic MOFs were used for dye adsorption, and a remarkable amount of dye was adsorbed in the MOFs. In addition, owing to their cationic nature, the MOFs selectively removed anionic dyes from a mixture of anionic, cationic, and neutral dyes in the aqueous phase. Interestingly, the present MOFs were also highly effective for the removal of oxoanions (MnO₄^- and Cr₂O₇^2-) from water.

Efficient and Highly Selective CO2 Capture, Separation, and Chemical Conversion under Ambient Conditions by a Polar-Group-Appended Copper(II) Metal-Organic Framework

A polar sulfone-appended copper(II) metal-organic framework (MOF; 1) has been synthesized from the dual-ligand approach comprised of tetrakis(4-pyridyloxymethylene)methane and dibenzothiophene-5,5'-dioxide-3,7-dicarboxylic acid under solvothermal conditions. This has been studied by different techniques that included single-crystal X-ray diffractometry, based on which the presence of Lewis acidic open-metal sites as well as polar sulfone groups aligned on the pore walls is identified. MOF 1 displays a high uptake of CO₂ over N₂ and CH₄ with an excellent selectivity (S = 883) for CO₂/N₂ (15:85) at 298 K under flue gas combustion conditions. Additionally, the presence of Lewis acidic metal centers facilitates an efficient size-selective catalytic performance at ambient conditions for the conversion of CO₂ into industrially valuable cyclic carbonates. The experimental investigations for this functional solvent-free heterogeneous catalyst are also found to be in good correlation with the computational studies provided by configurational bias Monte Carlo simulation for both CO₂ capture and its conversion.

Nanochannel-based heterometallic {ZnIIHoIII}-organic framework with high catalytic activity for the chemical fixation of CO2

The exquisite combination of ZnII and HoIII generated the highly robust [ZnHo(CO2)6(OH2)]-based heterometallic framework of {[ZnHo(TDP)(H2O)]·5H2O·3DMF} n (NUC-30, H6TDP = 2,4,6-tri(2',4'-dicarboxyphenyl)pyridine), which featured outstanding physicochemical properties, including honeycomb nanochannels, high porosity, large specific surface area, the coexistence of highly open Lewis acid-base sites, good thermal and chemical stability, and resistance to most organic solvents. Due to its extremely unsaturated metal tetra-coordinated Zn(ii) ions, hepta-coordinated Ho(iii) and high faveolate void volume (61.3%), the conversion rate of styrene oxide and CO2 into cyclic carbonates in the presence of 2 mol% activated NUC-30 and 5 mol% n-Bu4NBr reached 99% under the mild conditions of 1.0 MPa and 60 °C. Furthermore, the luminescence sensing experiments proved that NUC-30 could be used as a fast, sensitive and highly efficiency sensor for the detection of Fe3+ in aqueous solution. Therefore, these results prove that nanoporous MOFs assembled from pyridine-containing polycarboxylate ligands have wide applications, such as catalysis and as luminescent materials.

Conformational isomerism involving the carboxylate groups of a linker in metal organic frameworks and its distinctive influence on the detection of ketones

Selective sensing of various ketones by Zn(ii) based conformational MOF isomers.

Heterometallic {ZnEu}-metal-organic framework for efficient chemical fixation of CO2

Based on a ligand-directed synthetic strategy, the acidic solvothermal reaction of ZnO, Eu2O3, and 4,4',4''-(pyridine-2,4,6-triyl)tri(1,3-benzenedicarboxylic acid) (H6PTTBA) generated a targeted robust double-walled honeycomb material {[EuIIIZnII(HPTTBA)(H2O)]·4DMF·3H2O}n (simplified as NUC-9), which featured excellent characteristics such as dual tubular nanochannels, high porosity, specific surface area, abundant exposed active metal sites, etc. Although both types of nano-channels (I and II) alternately arranged in the lattice and shaped by six rows of [EuIIIZnII(CO2)6(H2O)] SBUs possessed an equal amount of exposed active metal sites, they could be differentiated according to the discrepant inner surface functionalized by free carboxyl oxygen atoms or coordinated aqueous molecules. Moreover, an activated sample of NUC-9 exhibited better catalytic performance than documented Zn- or Eu-based MOFs for the chemical transformation of various epoxides into the related carbonates under comparatively mild conditions of 1 atm CO2 flow and 70 °C, which should be ascribed to the unsaturated Zn2+ and Eu3+ ions acting as strong Lewis acid sites and free carboxyl oxygen atoms as basic sites synergistically polarizing and activating the substrates of epoxides and CO2 and consequently promoting the reaction. Furthermore, the water-resistant framework of NUC-9 could selectively and sensitively discriminate Fe3+ in aqueous solution according to the fluorescence quenching effect. In addition, it is worth mentioning that the successful self-assembly of NUC-9 provides an effective synthetic technique by employing the designed favorable organic ligand for achieving the targeted functional model of MOFs.

Coordination-driven assembly of a 3d-4f heterometallic organic framework with 1D Cu4I4 and Eu-based chains: syntheses, structures and various properties

A three-dimensional porous 3d-4f heterometallic organic framework, namely, {[Eu3(Cu4I4)3(INA)9(DMF)4]·3DMF}n (YNU-2), was successfully prepared under solvothermal conditions. There are two different one-dimensional metal chains in the structure, namely, Cu4I4 and EuIII-based chains, resulting in an excellent stability of the prepared sample. A N2 sorption isotherm at 77 K revealed that the activated sample exhibits a Brunauer-Emmett-Teller surface area of 371 m2 g-1, while, YNU-2 can adsorb obviously higher CO2 amounts than CH4 at 273 K and 298 K under 1 atm because of the stronger interaction force between CO2 and the porous skeleton. Furthermore, YNU-2 is highly efficient heterogeneous catalyst for chemical fixation of the CO2 and epoxides into cyclic carbonates with a preferable recyclability. Taking into account its excellent stability, the prepared sample can be used to construct an electrochemical adapter sensor for detecting cocaine with a detection limit of 0.27 pg mL-1 in the wide range of 0.001-0.5 ng mL-1.

Highly efficient synergistic CO2 conversion with epoxide using copper polyhedron-based MOFs with Lewis acid and base sites

The catalytic performances and effect of LASs and LBSs of four isomorphous Cu-PMOFs in CO₂ cycloaddition reaction were systematically studied. JLU-Liu21 exhibited significant catalytic efficiency, remarkable recyclability and catalytic stability.