Facile Colorimetric Nanozyme Sheet for the Rapid Detection of Glyphosate in Agricultural Products Based on Inhibiting Peroxidase-Like Catalytic Activity of Porous Co3O4 Nanoplates

The fate and impact of Co3O4 nanoparticles in the soil environment: Observing the dose effect of nanoparticles on soybeans

The widespread presence and distribution of metal-based nanoparticles (NPs) in soil is threatening crop growth and food security. However, little is known about the fate of Co3O4 NPs in the soil-soybean system and their phytotoxicity. The study demonstrated the effects of Co3O4 NPs on soybean growth and yield in soil after 60 days and 140 days, and compared them with the phytotoxic effects of Co2+. The results showed that Co3O4 NPs (10-500 mg/kg) had no significant toxic effect on soybeans. Soil available Co content was significantly increased under 500 mg/kg Co3O4 NPs treatment. Compared with Co2+, Co3O4 NPs mainly accumulated in roots and had limited transport to the shoots, which was related to the particle size, surface charge and chemical stability of Co3O4 NPs. The significant accumulation of Co3O4 NPs in roots further led to a significant decrease in root antioxidant enzyme activity and changes in functional gene expression. Co3O4 NPs reduced soybean yield after 140 days, but interestingly, at specific doses, it increased grain nutrients (Fe content increased by 17.38% at 100 mg/kg, soluble protein and vitamin E increased by 14.34% and 16.81% at 10 mg/kg). Target hazard quotient (THQ) assessment results showed that consuming soybean seeds exposed to Co3O4 NPs (≥100 mg/kg) and Co2+ (≥10 mg/kg) would pose potential health risks. Generally, Co3O4 NPs could exist stably in the environment and had lower environmental risks than Co2+. These results help to better understand the environmental behavior and plant effect mechanisms of Co3O4 NPs in soil-plant systems.

Enhanced oxidase mimic activity of raspberry-like N-doped Mn3O4 with oxygen vacancies for efficient colorimetric detection of gallic acid coupled with smartphone

The content of gallic acid (GA) is positively correlated with the quality grade of tea. Here, we developed a colorimetric method based on raspberry-like N-doped Mn3O4 nanospheres (N-Mn3O4 NSs) with oxidase-like activity for GA assay. Modulating the electronic structure of Mn3O4 by N doping could promote the catalysis ability, and the produced oxygen vacancies (OVs) can provide high surface energy and abundant active sites. The N-Mn3O4 NSs presented low Michaelis-Menten constant (Km) of 0.142 mM and maximum initial velocity (Vmax) of 9.8 × 10-6 M s-1. The sensor exhibited excellent analytical performance towards GA detection, including low LOD (0.028 μM) and promising linear range (5 ∼ 30 μM). It is attributed that OVs and O2- participated in TMB oxidation. Based on the reaction color changes, a visualized semi-quantitative GA detection could be realized via a smartphone-based system. It could be applied for evaluating GA quality in market-purchased black tea and green tea.

The impact of hollow core-shell nanozymes in biosensing: A case study of p-Fe3O4@PDA@ZIF-67

BACKGROUND

Nanozymes, a new class of nanomaterials, have emerged as promising substitutes for enzymes in biosensor design due to their exceptional stability, affordability, and ready availability. While nanozymes address many limitations of natural enzymes, they still face challenges, particularly in achieving the catalytic activity levels of their natural counterparts. This indicates the need for enhancing the sensitivity of biosensors based on nanozymes. The catalytic activity of nanozyme can be significantly improved by regulating its size, morphology, and surface composition of nanomaterial.

RESULTS

In this work, a kind of hollow core-shell structure was designed to enhance the catalytic activity of nanozymes. The hollow core-shell structure material consists of a nanozymes core layer, a hollow layer, and a MOF shell layer. Taking the classic peroxidase like Fe3O4 as an example, the development of a novel nanozyme@MOF, specifically p-Fe3O4@PDA@ZIF-67, is detailed, showcasing its application in enhancing the sensitivity of sensors based on Fe3O4 nanozymes. This innovative nanocomposite, featuring that MOF layer was designed to adsorb the signal molecules of the sensor to improve the utilization rate of reactive oxygen species generated by the nanozymes catalyzed reactions and the hollow layer was designed to prevent the active sites of nanozymes from being cover by the MOF layer. The manuscript emphasizes the nanocomposite's remarkable sensitivity in detecting hydrogen peroxide (H2O2), coupled with high specificity and reproducibility, even in complex environments like milk samples.

SIGNIFICANCE AND NOVELTY

This work firstly proposed and proved that Fe3O4 nanozyme@MOF with hollow layer structure was designed to improve the catalytic activity of the Fe3O4 nanozyme and the sensitivity of the sensors based on Fe3O4 nanozyme. This research marks a significant advancement in nanozyme technology, demonstrating the potential of structural innovation in creating high-performance, sensitive, and stable biosensors for various applications.

Three-dimensional polymer phenylethnylcopper/nitrogen doped graphene aerogel electrode coupled with Fe3O4 NPs nanozyme: Toward sensitive and robust photoelectrochemical detection of glyphosate in agricultural matrix

BACKGROUND

Presently, glyphosate (Gly) is the most extensively used herbicide globally, Nevertheless, its excessive usage has increased its accumulation in off-target locations, and aroused concerns for food and environmental safety. Commonly used detection methods, such as high-performance liquid chromatography and gas chromatography, have limitations due to expensive instruments, complex pre-processing steps, and inadequate sensitivity. Therefore, a facile, sensitive, and reliable Gly detection method should be developed.

RESULTS

A photoelectrochemical (PEC) sensor consisting of a three-dimensional polymer phenylethnylcopper/nitrogen-doped graphene aerogel (PPhECu/3DNGA) electrode coupled with Fe3O4 NPs nanozyme was constructed for sensitive detection of Gly. The microscopic 3D network of electrodes offered fast transfer routes for photo-generated electrons and a large surface area for nanozyme loading, allowing high signal output and analytical sensitivity. Furthermore, the use of peroxidase-mimicking Fe3O4 NPs instead of natural enzyme improved the stability of the sensor against ambient temperature changes. Based on the inhibitory effect of Gly on the catalytic activity Fe3O4 NPs, the protocol achieved Gly detection in the range of 5 × 10-10 to 1 × 10-4 mol L-1. Additionally, feasibility of the detection was confirmed in real agricultural matrix including tea, maize seedlings, maize seeds and soil.

SIGNIFICANCE

This work achieved facile, sensitive and reliable analysis towards Gly, and it was expected to inspire the design and utilization of 3D architectures in monitoring agricultural chemicals in food and environmental matrix.

Mechanistic investigation and dual-mode colorimetric-chemiluminescent detection of glyphosate based on the specific inhibition of Fe3O4@Cu nanozyme peroxidase-like activity

In this study, a dual-mode colorimetric/CL nanosensor was developed for glyphosate detection based on the specific inhibition of Fe3O4@Cu peroxidase-like activity. Synthesized Fe3O4@Cu exhibited high levels of peroxidase-like activity that triggered the oxidation of luminol/3,3',5,5'-tetramethyl benzidine dihydrochloride (TMB) to excited-state 3-aminophthalic acid/blue oxTMB, thereby delivering a CL signal/visible colorimetric signal, however, the presence of glyphosate inhibited this activity, resulting in a decrease in signal strength. In-depth investigation revealed that this inhibitory mechanism occurs via two pathways: one in which glyphosate chelates with Fe(III)/Cu(II) and occupy the catalytical active sites of Fe3O4@Cu, thereby decreasing the generation of OH, and another in which glyphosate competes with TMB to consume generated OH, thus reducing the oxidation of TMB. This mechanism formed the basis of our novel dual-mode colorimetric/CL glyphosate nanosensor, which achieved limits of detection (LODs) of 0.086 µg/mL and 0.019 µg/mL in tests, thus demonstrating its significant potential for on-site glyphosate monitoring.

Glyphosate as a Food Contaminant: Main Sources, Detection Levels, and Implications for Human and Public Health

Glyphosate is a broad-spectrum pesticide that has become the most widely used herbicide globally. However, concerns have risen regarding its potential health impacts due to food contamination. Studies have detected glyphosate in human blood and urine samples, indicating human exposure and its persistence in the organism. A growing body of literature has reported the health risks concerning glyphosate exposure, suggesting that the daily intake of contaminated food and water poses a public health concern. Furthermore, countries with high glyphosate usage and lenient regulations regarding food and water contamination may face more severe consequences. In this context, in this review, we examined the literature regarding food contamination by glyphosate, discussed its detection methods, and highlighted its risks to human health.

Dendritic-like MXene quantum dots@CuNi as an efficient peroxidase candidate for colorimetric determination of glyphosate

Oxidized MXene quantum dots@CuNi bimetal (MQDs@CuNi) were firstly prepared through a simple hydrothermal method. Compared to the controlled samples, MQDs@CuNi1:1 showed the highest peroxidase-like activity. The catalytic mechanism of MQDs@CuNi1:1 was investigated using a steady-state fluorescence analysis, which showed that MQDs@CuNi1:1 efficiently decomposes H2O2 and produces highly reactive hydroxyl radicals (OH). Furthermore, theoretical calculations showed that the remarkable catalytic activity of MQDs@CuNi1:1 originates from the interaction between CuNi bimetal and MQDs to promote the activation and decomposition of H2O2, making it easier to combine with the hydrogen at the end of 3,3',5,5'-Tetramethylbenzidine (TMB). Accordingly, a sensitive colorimetric sensor is proposed to detect glyphosate (Glyp), displaying a low detection limit of 1.13 µM. The work will provide a new way for the development of high-performance nanozyme and demonstrate potential applicability for the determination of pesticide residues in environment.

Magnetically Controlled Photothermal, Colorimetric, and Fluorescence Trimode Assay for Gastric Cancer Exosomes Based on Acid-Induced Decomposition of CP/Mn-PBA DSNBs

The accurate quantification of cancer-derived exosomes, which are emerging as promising noninvasive biomarkers for liquid biopsies in the early diagnosis of cancer, is becoming increasingly imperative. In our work, we developed a magnetically controlled photothermal, colorimetric, and fluorescence trimode aptasensor for human gastric cancer cell (SGC-7901)-derived exosomes. This sensor relied on CP/Mn-PBA DSNBs nanocomposites, created by decorating copper peroxide (CP) nanodots on polyethyleneimine-modified manganese-containing Prussian blue analogues double-shelled nanoboxes (PEI-Mn-PBA DSNBs). Through self-assembly, we attached CD63 aptamer-labeled CP/Mn-PBA DSNBs (Apt-CP/Mn-PBA DSNBs) to complementary DNA-labeled magnetic beads (cDNA-MB). During exosome incubation, these aptamers preferentially formed complexes with exosomes, and we efficiently removed the released CP/Mn-PBA DSNBs by using magnetic separation. The CP/Mn-PBA DSNBs exhibited high photoreactivity and photothermal conversion efficiency under near-infrared (NIR) light, leading to temperature variations under 808 nm irradiation, correlating with different exosome concentrations. Additionally, colorimetric detection was achieved by monitoring the color change in a 3,3',5,5'-tetramethylbenzidine (TMB) system, facilitated by PEI modification, NIR-enhanced peroxidase-like activity of CP/Mn-PBA DSNBs and their capacity to generate Cu2+ and H2O2 under acidic conditions. Moreover, in the presence of Cu2+ and ascorbic acid (AA), DNA sequences could form dsDNA-templated copper nanoparticles (CuNPs), which emitted strong fluorescence at around 575 nm. Increasing exosome concentrations correlated with decreases in temperature, absorbance, and fluorescence intensity. This trimode biosensor demonstrated satisfactory ability in differentiating gastric cancer patients from healthy individuals using human serum samples.

Development of a flow injection chemiluminescence immunoassay based on DES-mediated CuCo2O4 nanoenzyme for ultrasensitive detection of zearalenone in foods

Nanoenzymes have been widely used to construct biosensors because of their cost-effectiveness, high stability, and easy modification. At the same time, the discovery of deep eutectic solvents (DES) was a great breakthrough in green chemistry, and their combination with different materials can improve the sensing performance of biosensors. In this work, we report an immunosensor using CuCo2O4 nanoenzyme combined with flow injection chemiluminescence immunoassay for the automated detection of zearalenone (ZEN). The immunosensor exhibited excellent sensing performance. Under the optimal conditions, the detection range of ZEN was 0.0001-100 ng mL-1, and the limit of detection (LOD) was 0.076 pg mL-1 (S/N = 3). In addition, the immunosensor showed excellent stability with a relative standard deviation (RSD) of 2.65% for  15 repetitive  injections. The method has been successfully applied to the analysis of real samples with satisfactory recovery results, and can hence provide a reference for the detection of small molecules in food and feed.

A simple AIE probe to pesticide trifluralin residues in aqueous phase: Ultra-fast response, high sensitivity, and quantitative detection utilizing a portable platform

The threat from pesticide trifluralin residues to ecological environment and public health is becoming a growing problem. Thus, rapid and sensitive detection, particularly a simple and portable detected platform for trifluralin residues, are highly desired. Here, a small organic aggregation-induced emission (AIE) molecule (TPETPy) is facilely synthesized and applied to detect trifluralin both in lab and in actual water systems. Based on the photo-induced electron transfer (PET) mechanism, the emissive peak of TPETPy located at 475 nm in tetrahydrofuran (THF)/water mixture (ƒw = 90 %) under the excitation of 340 nm, decreases dramatically upon trace trifluralin addition and exhibits ultra-fast response (3 s), high sensitivity and selectivity, and good anti-interference ability. The fluorescence sensing correlation with the concentration of trifluralin shows good linearity in the range of 20-90 μg L-1 with the limit of detection of 6.28 μg L-1. Moreover, a portable smartphone-integrated detected platform based on fluorescent pattern Red/Green/Blue (RGB) values is first employed to realize the real-time and on-site quantitative fluorescent detection of trifluralin in actual water sources, featuring good accuracy and reproducibility. Hereby, this work provides not only a highly efficient trifluralin residues fluorescent probe but also a portable and straightforward operating platform to detect trifluralin pesticides quantitatively.

Co-based Nanozymatic Profiling: Advances Spanning Chemistry, Biomedical, and Environmental Sciences

Nanozymes, next-generation enzyme-mimicking nanomaterials, have entered an era of rational design; among them, Co-based nanozymes have emerged as captivating players over times. Co-based nanozymes have been developed and have garnered significant attention over the past five years. Their extraordinary properties, including regulatable enzymatic activity, stability, and multifunctionality stemming from magnetic properties, photothermal conversion effects, cavitation effects, and relaxation efficiency, have made Co-based nanozymes a rising star. This review presents the first comprehensive profiling of the Co-based nanozymes in the chemistry, biology, and environmental sciences. The review begins by scrutinizing the various synthetic methods employed for Co-based nanozyme fabrication, such as template and sol-gel methods, highlighting their distinctive merits from a chemical standpoint. Furthermore, a detailed exploration of their wide-ranging applications in biosensing and biomedical therapeutics, as well as their contributions to environmental monitoring and remediation is provided. Notably, drawing inspiration from state-of-the-art techniques such as omics, a comprehensive analysis of Co-based nanozymes is undertaken, employing analogous statistical methodologies to provide valuable guidance. To conclude, a comprehensive outlook on the challenges and prospects for Co-based nanozymes is presented, spanning from microscopic physicochemical mechanisms to macroscopic clinical translational applications.

Ratiometrically electrochemical and colorimetric dual-mode detection of glyphosate based on 2D Cu-TCPP(Fe) NSs

In this work, a dual-signal output sensor was developed for the ratiometrically electrochemical and colorimetric detection of glyphosate (GLYP) based on the duplex nature of 2D Cu-TCPP(Fe) nanosheets (2D Cu-TCPP(Fe) NSs). Cu active center sites in 2D Cu-TCPP(Fe) NSs could transform into CuCl for signal amplification in the presence of chloride ions (Cl-), which dropped dramatically upon GLPY addition due to the strong interaction between GLYP and cuprous ion triggering the competitive reaction with the conversion of CuCl into Cu-GLYP complex. Meanwhile, the constant current signals of Fe2+/3+ in the iron-porphyrin structure of Cu-TCPP(Fe) served as an inner reference, resulting in a ratiometrically electrochemical GLYP sensor. Moreover, 2D Cu-TCPP(Fe) NSs with intrinsic peroxidase-like activity was employed for the colorimetric determination of GLYP based on the specific inhibitory effect of GLYP on the peroxidase activity of 2D Cu-TCPP(Fe) nanozyme. GLYP concentrations can be quantified in the range from 1.0 × 10-10 M to 1.0 × 10-6 M and 1.0 × 10-9 M to 1.0 × 10-7 M, with detection limits of 3.9 × 10-12 M and 1.89 × 10-11 M for ratiometrically electrochemical method and colorimetric assay, respectively. Such a dual-mode sensor with remarkable selectivity, reproducibility, and stability was finally applied for GLYP detection in real samples and reliable outcomes were achieved.

Rapid colorimetric sensor for ultrasensitive and highly selective detection of Fumonisin B1 in cereal based on laccase-mimicking activity of silver phosphate nanoparticles

Ag3PO4 nanoparticles (NPs) was prepared through a facile coprecipitation method, and was first found to have excellent laccase-mimicking catalytic activity. The study confirms that Fumonisin B1 (FB1) can effectively hinder the production of superoxide anion (O2-) between Ag3PO4 NPs and dissolved oxygen, and further inhibit laccase-mimicking activity of Ag3PO4 NPs. Thus, a novel rapid colorimetric sensor for FB1 analysis in cereal was first established using laccase-mimicking activity as sensing signal. The absorbance variation of sensing solution is directly related to the amount of FB1, and the color change is further combined with smartphone for quantitively analysis of FB1. The limit of detection (LOD) of the sensor is determined as low as 1.73 μg·L-1, which is far lower than the maximum residue limits (MRLs) of FB1 set by European Commission and US Food and Drug Administration (FDA). The average recovery of 87.8-104.5% for FB1 detection was obtained in cereal.

Recent Advances in Design and Application of Nanomaterials-Based Colorimetric Biosensors for Agri-food Safety Analysis

A colorimetric sensor detects an analyte by utilizing the optical properties of the sensor unit, such as absorption or reflection, to generate a structural color that serves as the output signal to detect an analyte. Detecting the refractive index of an analyte by recording the color change of the sensor structure on its surface has several advantages, including simple operation, low cost, suitability for onsite analysis, and real-time detection. Colorimetric sensors have drawn much attention owing to their rapidity, simplicity, high sensitivity and selectivity. This Review discusses the use of colorimetric sensors in the food industry, including their applications for detecting food contaminants. The Review also provides insight into the scope of future research in this area.

Dual-Modal Bimetallic Nanozyme-Based Sensing Platform Combining Colorimetric and Photothermal Signal Cascade Catalytic Enhancement for Detection of Hypoxanthine to Judge Meat Freshness

Considering the enormous demand for meat in people's daily lives, the development of efficient meat freshness assays is of great significance for safeguarding food safety. Here, a novel bimetallic nanozyme Fe@CeO2 with high peroxidase-like activity was first synthesized by embedding ferrocenecarboxylic acid (Fc) into hollow CeO2 nanospheres, which combined with xanthine oxidase (XOD) to develop a self-supplying H2O2-facilitated enzymatic cascade catalytic system of XOD + Fe@CeO2, yielding a meat freshness indicator hypoxanthine (Hx)-responsive colorimetric and photothermal dual-mode analytical platform for judging meat freshness upon the assistance of 3,3',5,5'-tetramethylbenzidine (TMB). Owing to the catalytic activity of XOD to convert Hx into H2O2, Fe@CeO2 rapidly dissociated it into •OH via a peroxidase activity-triggered Fenton-like reaction, emerging a typical enzymatic cascade catalytic reaction. As a result, the colorless TMB was oxidized to be the product of dark-blue oxTMB by •OH, with a chromogenic reaction-driven absorption enhancement at 652 nm, which endowed it with a significant photothermal effect under 660 nm laser irradiation. On this basis, an Hx concentration-dependent colorimetric and photothermal dual-mode signal cascade catalytic enhancement sensing platform was proposed by integrating with a Color Picker App-installed smartphone and a 660 nm laser-equipped handheld thermal imager, achieving the onsite quantitative, reliable, and visual detection of Hx in real meat samples for judging meat freshness with acceptable results. Notably, the colorimetric and photothermal dual-mode signal cascade catalytic enhancement improved not only the reliability but also the sensitivity of the assay, which provided new insights for efficient onsite visual monitoring of meat freshness to safeguard food safety.

Colorimetric immunosensing using liposome encapsulated MnO2 nanozymes for SARS-CoV-2 antigen detection

Development of specific signal reporters with signal amplification effect are highly needed for sensitive and accurate detection of pathogen. Herein, we design a colorimetric immunosensing nanosystem based on liposome encapsulated quantum dots-sized MnO2 nanozyme (MnO2QDs@Lip) as a signal reporter for ultrasensitive and fast detection of SARS-CoV-2 antigen. The pathogenic antigens captured and separated by antibody-conjugated magnetic beads (MBs) are further connected with antibody-modified MnO2QDs@Lip to form a sandwich-like immunocomplex structure. After triggered release, MnO2 QDs efficiently catalyze colorless 3,3',5,5'-tetramethylbenzidine (TMB) to blue oxidized TMB, which can be qualitatively observed by naked eyes and quantitatively analyzed by UV-Vis spectra or smartphone platforms. By taking advantages of immuno-magnetic separation, excellent peroxidase-like catalytic activity of MnO2 QDs, and high encapsulation efficiency of MnO2QDs@Lip, ultrasensitive detection of SARS-CoV-2 antigen ranging from 0.1 pg/mL to 100 ng/mL is achieved within 20 min. The limit of detection (LOD) is calculated to be 65 fg/mL in PBS buffer. Furthermore, real clinical samples of SARS-CoV-2 antigens can be effectively identified by this immunosensing nanosystem with excellent accuracy. This proposed detection nanosystem provides a strategy for simple, rapid and ultrasensitive detection of pathogens and may shed light on the development of new POCT detection platforms for early diagnosis of pathogens and surveillance in public health.

Pesticide biosensors: trends and progresses

Pesticides, chemical substances extensively employed in agriculture to optimize crop yields, pose potential risks to human and environmental health. Consequently, regulatory frameworks are in place to restrict pesticide residue concentrations in water intended for human consumption. These regulations are implemented to safeguard consumer safety and mitigate any adverse effects on the environment and public health. Although gas chromatography- and liquid chromatography-mass spectrometry (GC-MS and LC-MS) are highly efficient techniques for pesticide quantification, their use is not suitable for real-time monitoring due to the need for sophisticated laboratory pretreatment of samples prior to analysis. Since they would enable analyte detection with selectivity and sensitivity without sample pretreatment, biosensors appear as a promising alternative. These consist of a bioreceptor allowing for specific recognition of the target and of a detection platform, which translates the biological interaction into a measurable signal. As early detection systems remain urgently needed to promptly alert and act in case of pollution, we review here the biosensors described in the literature for pesticide detection to advance their development for use in the field.

Biocompatible Palladium Nanoparticles Prepared Using Vancomycin for Colorimetric Detection of Hydroquinone

Hydroquinone poses a major threat to human health and is refractory to degradation, so it is important to establish a convenient detection method. In this paper, we present a novel colorimetric method for the detection of hydroquinone based on a peroxidase-like Pd nanozyme. The vancomycin-stabilized palladium nanoparticles (Van-Pd_n NPs, n = 0.5, 1, 2) were prepared using vancomycin as a biological template. The successful synthesis of Van-Pd_n NPs (n = 0.5, 1, 2) was demonstrated by UV-vis spectrophotometry, transmission electron microscopy, and X-ray diffraction. The sizes of Pd nanoparticles inside Van-Pd_0.5 NPs, Van-Pd₁ NPs, and Van-Pd₂ NPs were 2.6 ± 0.5 nm, 2.9 ± 0.6 nm, and 4.3 ± 0.5 nm, respectively. Furthermore, Van-Pd₂ NPs exhibited excellent biocompatibility based on the MTT assay. More importantly, Van-Pd₂ NPs had good peroxidase-like activity. A reliable hydroquinone detection method was established based on the peroxidase-like activity of Van-Pd₂ NPs, and the detection limit was as low as 0.323 μM. Therefore, vancomycin improved the peroxidase-like activity and biocompatibility of Van-Pd₂ NPs. Van-Pd₂ NPs have good application prospects in the colorimetric detection of hydroquinone.

Sensitive and Label-Free Colorimetric Detection of Glyphosate Based on the Suppression Peroxidase-Mimicking Activity of Cu(II) Ions

The sensitive and accurate determination of glyphosate (Glyp) is urgently demanded because it is closely correlated with human health and environmental safety. In this work, we proposed a sensitive and convenient colorimetric assay by employing copper ion peroxidases for the detection of Glyp in the environment. Free Cu(II) ions displayed high peroxidase activity and can catalytically oxidize the colorless 3,3',5,5'-tetramethylbenzidine (TMB) into blue oxTMB, resulting in an obviously visible discoloration reaction. Once the Glyp is added, the ability of copper ions to mimic peroxidase can be largely suppressed because of the generation of Glyp-Cu²⁺ chelate. The favorable selectivity and sensitivity were demonstrated in the colorimetric analysis of Glyp. Furthermore, this rapid and sensitive method was successfully applied in the accurate and reliable determination of glyphosate in the real sample, holding promising applications in pesticide determination in the environment.

Ultrathin C3N4 nanosheets-based oxidase-like 2D fluorescence nanozyme for dual-mode detection of organophosphorus pesticides

Engineering efficient dual-mode portable sensor with built-in cross reference correction is of great significance for onsite reliable and precise detection of organophosphorus pesticides (OPs) and evading the false-positive outputs, especially in emergency case. Currently, most nanozyme-based sensors for OPs monitoring primarily replied on the peroxidase-like activity, which involved unstable and toxic H₂O₂. In this scenario, a hybrid oxidase-like 2D fluorescence nanozyme (PtPdNPs@g-C₃N₄) was yielded by in situ growing PtPdNPs in the ultrathin two-dimensional (2D) graphitic carbon nitride (g-C₃N₄) nanosheet. When acetylcholinesterase (AChE) hydrolyzed acetylthiocholine (ATCh) to thiocholine (TCh), it ablated O₂^-• from the dissolved O₂ catalyzed by PtPdNPs@g-C₃N₄'s oxidase-like activity, hampering the oxidation of o-phenylenediamine (OPD) into 2,3-diaminophenothiazine (DAP). Consequently, with the increasing concentration of OPs which inhibited the blocking effect by inactivating AChE, the produced DAP caused an apparent color change and a dual-color ratiometric fluorescence change in the response system. Through integrating into a smartphone, a H₂O₂-free 2D nanozyme-based onsite colorimetric and fluorescence dual-mode visual imaging sensor for OPs was proposed with acceptable results in real samples, which holds vast promise for further development of commercial point-of-care testing platform in early warning and controlling of OPs pollution for safeguarding environmental health and food safety.

A label-free colorimetric 3D paper-based device for ochratoxin A detection using G-quadruplex/hemin DNAzyme with a smartphone readout

The colorimetric sensor usually depends on enzyme-mediated signal amplification to achieve trace analysis of ochratoxin A (OTA) residues in food samples. However, the enzyme labeling and manual addition of reagents steps increased assay time and operation complexity, restricting their application in point-of-care testing (POCT). Herein, we report a label-free colorimetric device integrating a 3D paper-based analytical device and a smartphone as handheld readout for rapid and sensitive detection of OTA. Using vertical-flow design, the paper-based analytical device enables the specific recognition of target and self-assembly of G-quadruplex (G4)/hemin DNAzyme to be performed, then employs DNAzyme for transducing the OTA binding event signal into a colorimetric signal. The design of independent functional units, including biorecognition unit, self-assembly unit and colorimetric units, which can address crowding and disorder of biosensing interfaces and improve the recognition efficiency of aptamer (apta). In addition, we eliminated signal losses and nonuniform coloring by introducing carboxymethyl chitosan (CMCS) to obtain perfectly focused signals on colorimetric unit. On the basis of parameter optimization, the device exhibited a detection range of 0.1-500 ng/mL and a detection limit of 41.9 pg/mL for OTA. Importantly, good results were obtained in spiked real samples, indicating applicability and reliability of developed device.

A colorimetric smartphone-based sensor for on-site AA detection in tropical fruits using Fe-P/NC single-atom nanoenzyme

Ascorbic acid is one of the important vitamins to maintain human life activities and plays an irreplaceable role in regulating human redox metabolism. Fresh fruit can provide plenty of AA to maintain human metabolic balance. Thus, it is great significant to develop a rapid and convenient method for detection of AA to evaluate the freshness and nutritional quality of fruits. In this work, Fe single-atom nanoenzyme (Fe-SAN) based colorimetric sensor assisted with smartphone was designed for rapid and on-site AA detection in tropical fruits. Firstly, Fe-SAN with high oxidase-mimicking activity was synthesized by using green tea leaves as sources of carbon and nitrogen and NaH₂PO₂ as P source to obtain Fe-P/NC SAN, in which P was used to reconstruct the distribution of electronic to enhance the oxidase-mimicking activity of Fe-SAN. Besides, the as-synthesized Fe-P/NC SAN with remarkable oxidase-like activities could oxidize 3,3́,5,5́-tetramethylbenzidine (TMB) to blue colored oxidized TMB. AA could inhibit the oxidation of TMB, leading to blue fading. Based on the above principle, colorimetric sensor integrated with smartphone RGB mode was fabricated and exhibited a good linear detection range (0.5-100 μM) and low detection limit of 0.315 μM for AA detection under optimal conditions. More importantly, the developed sensor could rapidly and accurately detect AA in real sample, such as pineapple, wax apple and mango. Therefore, this research provides a new cost-effective method for the efficient and exact detection of AA in tropical fruit, which has a broad application prospect.

Porous-nanozyme-based colorimetric sensor for rapid detection of kanamycin in foods under neutral condition

Most colorimetric methods based on nanozymes need to have excellent performance under acidic condition, so they are currently facing some challenges in the field of food hazard detection. Herein, a facile and rapid colorimetric sensor for kanamycin (KAN) detection in foods under neutral condition has been designed using the peroxidase-mimic activity of porous nanozyme like Co₃ O₄ nanodisk. Further investigations showed that the interaction mechanism between porous Co₃ O₄ nanodisk and substrates belongs to a ping-pong model, and the inhibition type of KAN on the peroxidase-mimic activity is noncompetitive inhibition. The constructed sensor has good sensitivity for KAN with the limit of 57 nM, and the color changes can be discerned visually when KAN exceeds 0.5 µM. Besides, the colorimetric sensor obtains excellent recovery results in chicken serum, milk, honey, and pork, which shows that the proposed sensing strategy can provide a rapid and convenient detection method for KAN in foods under neutral condition. PRACTICAL APPLICATION: The established sensing strategy can rapidly distinguish whether KAN residue exceeds the permissible level within 10 min, which meets the requirement for on-site monitoring of antibiotics in foods, and also open up a new idea for other hazards detection under neutral condition.

Metal Coordination-Driven Supramolecular Nanozyme as an Effective Colorimetric Biosensor for Neurotransmitters and Organophosphorus Pesticides

Analytical methods for detecting neurotransmitters (NTs) and organophosphorus (OP) pesticides with high sensitivity are vitally necessary for the rapid identification of physical, mental, and neurological illnesses, as well as to ensure food safety and safeguard ecosystems. In this work, we developed a supramolecular self-assembled system (SupraZyme) that exhibits multi-enzymatic activity. SupraZyme possesses the ability to show both oxidase and peroxidase-like activity, which has been employed for biosensing. The peroxidase-like activity was used for the detection of catecholamine NTs, epinephrine (EP), and norepinephrine (NE) with a detection limit of 6.3 µM and 1.8 µM, respectively, while the oxidase-like activity was utilized for the detection of organophosphate pesticides. The detection strategy for OP chemicals was based on the inhibition of acetylcholine esterase (AChE) activity: a key enzyme that is responsible for the hydrolysis of acetylthiocholine (ATCh). The corresponding limit of detection of paraoxon-methyl (POM) and methamidophos (MAP) was measured to be 0.48 ppb and 15.8 ppb, respectively. Overall, we report an efficient supramolecular system with multiple enzyme-like activities that provide a versatile toolbox for the construction of sensing platforms for the colorimetric point-of-care detection of both NTs and OP pesticides.

A versatile platform for colorimetric, fluorescence and photothermal multi-mode glyphosate sensing by carbon dots anchoring ferrocene metal-organic framework nanosheet

Concerns regarding pesticide residues have driven attempts to exploit accurate, prompt and straightforward approaches for food safety pre-warning. Herein, a nanozyme-mediated versatile platform with multiplex signal response (colorimetric, fluorescence and temperature) was proposed for visual, sensitive and portable detection of glyphosate (GLP). The platform was constructed based on a N-CDs/FMOF-Zr nanosensor that prepared by in situ anchoring nitrogen-doped carbon dots onto zirconium-based ferrocene metal-organic framework nanosheets. The N-CDs/FMOF-Zr possessed excellent peroxidase (POD)-like activity and thus could oxide colorless 3, 3', 5, 5'-tetramethylbenzidine (TMB) into a blue oxidized TMB (oxTMB) in presence of H₂O₂. Intriguingly, owing to the blocking effect triggered by multiple interaction between GLP and N-CDs/FMOF-Zr, its POD-like activity of the latter was remarkably suppressed, which can modulate the transformation of TMB into oxTMB, generating tri-signal responses of fluorescence enhancement, absorbance and temperature decrease. More significantly, the temperature mode can be facilely realized by a portable home-made mini-photothermal device and handheld thermometers. The proposed multimodal sensing was capable of providing sensitive results by fluorescence mode and simultaneously realized visual/portable testing by colorimetric and photothermal channels. Consequently, it exhibited more adaptability for practical applications, which can satisfy different testing requirements according to sensitivity and available instruments/meters, presenting a new horizon for exploiting multifunctional sensors.

Magnetic micromixing for highly sensitive detection of glyphosate in tap water by colorimetric immunosensor

Glyphosate is the most widely used herbicide in the world and, in view of its toxicity, there is a quest for easy-to-use, but reliable methods to detect it in water. To address this issue, we realized a simple, rapid, and highly sensitive immunosensor based on gold coated magnetic nanoparticles (MNPs@Au) to detect glyphosate in tap water. Not only the gold shell provided a sensitive optical transduction of the biological signal - through the shift of the local surface plasmon resonance (LSPR) entailed by the nanoparticle aggregation -, but it also allowed us to use an effective photochemical immobilization technique to tether oriented antibodies straight on the nanoparticles surface. While such a feature led to aggregates in which the nanoparticles were at close proximity each other, the magnetic properties of the core offered us an efficient tool to steer the nanoparticles by a rotating magnetic field. As a result, the nanoparticle aggregation in presence of the target could take place at higher rate (enhanced diffusion) with significant improvement in sensitivity. As a matter of fact, the combination of plasmonic and magnetic properties within the same nanoparticles allowed us to realize a colorimetric biosensor with a limit of detection (LOD) of 20 ng∙L^-1.

Recent advances in colorimetric sensors based on nanozymes with peroxidase-like activity

Nanozymes have been widely used to construct colorimetric sensors due to their advantages of cost-effectiveness, high stability, good biocompatibility, and ease of modification. The emergence of nanozymes greatly enhanced the detection sensitivity and stability of the colorimetric sensing platform. Recent significant research has focused on designing various sensors based on nanozymes with peroxidase-like activity for colorimetric analysis. However, with the deepening of research, nanozymes with peroxidase-like activity has also exposed some problems, such as weak affinity and low catalytic activity. In view of the above issues, existing investigations have shown that the catalytic properties of nanozymes can be improved by adding surface modification and changing the structure of nanomaterials. In this review, we summarize the recent trends and advances of colorimetric sensors based on several typical nanozymes with peroxidase-like activities, including noble metals, metal oxides, metal sulfides/metal selenides, and carbon and metal-organic frameworks (MOF). Finally, the current challenges and prospects of colorimetric sensors based on nanozymes with peroxidase-like activity are summarized and discussed to provide a reference for researchers in related fields.

Smartphone-Based Pressure Signal Readout Device Combined with Bidirectional Immunochromatographic Test Strip for Dual-Analyte Detection

Pressure has been a facile signal readout mode for developing point-of-care testing devices due to the attractive features of portability, accessibility, rapidity, and affordability. Herein, a pressure signal readout device was designed by integrating two homemade needle-type piezoresistive transducers, a controller for a thin-film piezoresistive sensor and a smartphone. Meanwhile, a bidirectional immunochromatographic test strip was designed as an immunoreaction platform for dual-analyte detection. Using PdCuPt nanoparticles with catalase-mimic activity as signal tags, the pressure signals triggered by catalyzed aerogenous reaction were monitored by the pressure signal readout device and read on a smartphone with the Bluetooth module. In this proof-of-principle work, imidacloprid and carbendazim were detected as model analytes. The dynamic ranges for quantitating imidacloprid and carbendazim are 20 pg mL^-1 to 50 ng mL^-1 and 50 pg mL^-1 to 50 ng mL^-1, respectively. The whole immunoassay process was completed within 16 min. The recovery values for imidacloprid and carbendazim spiked into herbal medicines are 82.0-110.0 and 84.0-116.0%, respectively, verifying its reliability for real sample detection. As the smartphone APP and controller for a thin-film piezoresistive sensor contain 12 signal channels, the system can be easily extended to meet the demand for high-throughput screening.

Zinc pyrovanadate nanorods with excellent peroxidase-like activity at physiological pH for the colorimetric assay of H2O2 and epinephrine

Exploring highly active peroxidase mimics at physiological pH is important for the construction of efficient and convenient colorimetric sensing platforms for detecting small biomolecules. In this work, prepared zinc pyrovanadate (Zn₃V₂O₇(OH)₂·2H₂O) nanorods exhibit excellent peroxidase-like activity, which is verified by the fast oxidation of colorless 3,3',5,5'-tetramethylbenzidine (TMB) into a blue product (oxTMB) by H₂O₂ at physiological pH (pH = 7) in 2 min. In addition, the catalytic behaviors of Zn₃V₂O₇(OH)₂·2H₂O as a peroxidase-like nanozyme conform to the Michaelis-Menten equation. Scavenger experiments prove that the catalytic activity of Zn₃V₂O₇(OH)₂·2H₂O is ascribed to ˙O₂^- radicals generated in the process of catalysis. Based on the peroxidase-like activity of the Zn₃V₂O₇(OH)₂·2H₂O nanozyme, a fast and convenient colorimetric sensor has been constructed to detect H₂O₂ and epinephrine (EP) under physiological pH. The detection limit of EP is as low as 0.26 μM. In addition, the feasibility of the proposed sensor has been validated to detect H₂O₂ in milk and EP in serum.

Carbon Dot-Anchored Cobalt Oxyhydroxide Composite-Based Hydrogel Sensor for On-Site Monitoring of Organophosphorus Pesticides

The development of a portable, quantitative, and user-friendly sensor for on-site monitoring of organophosphorus pesticides (OPs) is significantly urgent to guarantee food safety. Herein, a carbon dot/cobalt oxyhydroxide composite (CD/CoOOH)-based fluorescent hydrogel sensor is constructed for precisely quantifying OPs using a homemade portable auxiliary device. As a fluorescence signal indicator, the orange-emissive CD/CoOOH composite is encapsulated into an agarose hydrogel kit for amplifying the detection signals, shielding background interference, and enhancing stability. Acetylcholinesterase (AChE) catalyzes the hydrolysis of the substrate to produce thiocholine, which induces the decomposition of CoOOH and makes the fluorescence enhancement of the hydrogel platform possible. OPs can specifically block the AChE activity to limit thiocholine production, resulting in a decrease in platform fluorescence. The image color of the fluorescent hydrogel kit is transformed into digital information using a homemade auxiliary device, achieving on-site quantitative detection of paraoxon (model target) with a detection limit of 10 ng mL^-1. Harnessing CD/CoOOH composite signatures, hydrogel encapsulation, and portable optical devices, the proposed fluorescence hydrogel platform demonstrated high sensitivity and good anti-interference performance in agricultural sample analysis, indicating considerable potential in the on-site application.

Aptamer-enhanced the Ag(I) ion-3,3',5,5'-tetramethylbenzdine catalytic system as a novel colorimetric biosensor for ultrasensitive and selective detection of paraquat

A facile and simple colorimetric biosensor was first established for paraquat (PQ) detection based on the aptamer-enhanced oxidation process of 3,3',5,5'-tetramethylbenzidine (TMB) by Ag⁺. The study confirmed that the interaction of PQ-15 aptamer with Ag⁺ accelerates the electron transfer from the aptamer-Ag⁺ complex to dissolved oxygen, which enhances the release of superoxide anion radicals (O₂̇^-) and facilitates the catalytic oxidation of the chromogenic substrate. PQ-15 aptamer will preferentially bind to PQ molecules, resulting in no further enhancement of the catalytic activity of Ag⁺. Molecular docking results revealed that the PQ molecules are attached to the stem-loop region of the PQ-15 aptamer through σ-π conjugation interactions. The proposed method is simple that only contains Ag⁺ and corresponding aptamer. The limit of detection (LOD) of the constructed colorimetric biosensor for PQ detection was determined to be 16.5 μg·L^-1, belowing the maximum residue limit in fruits and vegetables set by the EU. Moreover, the colorimetric biosensor showed excellent selectivity and anti-interference properties, which was validated for detecting PQ residues in several typical agricultural and water samples.

The formation of higher alcohols in rice wine fermentation using different rice cultivars

Higher alcohols are closely related to the flavor and safety of rice wine. The formation of n-propanol, isobutanol, isoamyl alcohol, and phenylethanol during rice wine fermentations was for the first time investigated in this study among 10 rice cultivars from two main production regions. Rice wine made from Yashui rice, the long-grain non-glutinous rice from Guizhou, produced the highest yields of higher alcohols (487.45 mg/L), and rice wine made from five glutinous rice cultivars produced the lowest yields of higher alcohols (327.45-344.16 mg/L). An extremely strong correlation was found between the starch in rice and higher alcohols in rice wine. Further analysis first showed that the former fermentation period was key for the nutrient consumption and higher alcohol formation, with more than 55% of glucose being consumed and more than 75% of higher alcohols being synthesized in 48 h. Correlation analysis confirmed the strong correlation between nutrient consumption and higher alcohol formation including valine-isobutanol (coefficient higher than 0.8 in seven rice cultivars and higher than 0.6 in three rice cultivars), glucose-isoamyl alcohol (coefficient higher than 0.8 in five rice cultivars and higher than 0.6 in the other five rice cultivars), and glucose-phenylethanol (coefficient higher than 0.8). The correlation of threonine-n-propanol, leucine-isoamyl alcohol, phenylalanine-phenylethanol, glucose-n-propanol, and glucose-isobutanol varied among the rice wines made from 10 rice cultivars. RT-qPCR analysis on five target genes verified the variation caused by different rice cultivars. this study for the first time reported the special formation pattern of higher alcohols during rice wine fermentation, emphasizing the early contribution of glucose metabolism on the formation of isobutanol. This study highlighted the significance of rice selection for making rice wine with good quality and provided theoretical references for the control of higher alcohols, especially in the former period of rice wine fermentation.

Optical sensing techniques for rapid detection of agrochemicals: Strategies, challenges, and perspectives

In recent years, the irrational use of agrochemicals has caused great harm to the environment and public health. Along with the rapid development of optical technology and nanotechnology, the research of optical sensing methods in agrochemical detection has been developed rapidly owing to its advantages of simplicity, fast response, and cost-effectiveness. In this review, the strategies of employing optical systems based on colorimetric sensor, fluorescence, chemiluminescence, terahertz spectroscopy, surface plasmon resonance, and surface-enhanced Raman spectroscopy for sensing agrochemicals were summarized. In addition, the challenges in the practical application of optical sensing technologies for agrochemical detection were discussed in-depth, and potential future trends and prospects of these techniques were addressed. A variety of nanomaterials have been developed for enhancing the sensitivity of optical sensing systems. The optical properties of nanomaterials are governed by their size, shape, and chemical structure. Although each optical sensing system holds its advantages, there are still many challenges that need to be overcome in practical applications. With the continuous developments in novel functional nanomaterials, sample preparation methods, and spectral processing algorithms, optical sensors are expected to have powerful potential for rapid testing of agrochemicals in the environment and foods.

A portable smartphone-based detection of glyphosate based on inhibiting peroxidase-like activity of heptanoic acid/Prussian blue decorated Fe3O4 nanoparticles

The rapid and onsite detection of glyphosate in tobacco products is still a great challenge. In this study, a novel smartphone-assisted sensing platform for the detection of glyphosate has been successfully proposed through the peroxidase-like activity of Fe3O4-based nanozyme. Heptanoic acid/Prussian blue (PB) decorated Fe3O4 nanoparticles (Fe3O4@C7/PB) could catalyze and oxidize 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS, colorless) into a steel blue colored product in the presence of hydrogen peroxide. Glyphosate could specifically inhibit the peroxidase-like activity of Fe3O4@C7/PB by occupying the active site, thereby the glyphosate detection could be accomplished within 10 min by monitoring the color change of ABTS. This study has developed a smartphone-based portable detection platform for online analysis of glyphosate with a detection limit of 0.1 μg mL-1. The absorbance response curve of glyphosate showed good linearity in the concentration range of 0.125-15 μg mL-1 at 415, 647, and 730 nm. Moreover, by employing a co-precipitation technology and inhibiting the peroxidase-like activity, the glyphosate analysis would be less affected by the tobacco sample matrix. The nanosensor possesses excellent selectivity and anti-interference ability, which has application value in actual samples for onsite screening.

Enzyme-free and rapid visual quantitative detection for pesticide residues utilizing portable smartphone integrated paper sensor

Serious toxicity for organisms from pesticide glyphosate (Gly) residues to the ecosystem and human health has become a consensus. Rapid and selective detection of glyphosate, especially using a simple and portable instrument, is highly desired. In this work, we develop a novel enzyme-free rapid and visual ratiometric fluorescence sensor for selectively quantitative detecting glyphosate by integrating the designed blue carbon nanodots (CDs) and gold nanoclusters (Au NCs). The fluorescence of CDs can be quickly quenched via aggregation-caused quenching (ACQ) within 2 s after introducing glyphosate, resulting from the formation of CDs-Gly-CDs complex aggregation. While the Au NCs serve as the reference signal without any change, therefore leading to obvious and instant ratiometric fluorescence variation from blue to pink to orange. The broad linear range was obtained from 0 to 180 nM with a satisfactory detection limit of 4.19 nM. Furthermore, this approach was successfully applied to detect glyphosate in real samples and a portable smartphone platform integrated paper sensor was developed for in-site visual quantitative glyphosate detection, offering a promising strategy for the construction of enzyme-free trace hazard detection system.

Selection and colorimetric application of ssDNA aptamers against metamitron based on magnetic bead-SELEX

Metamitron (MTM) is a typical and widely used triazine herbicide in agricultural production. Its moderate toxicity and high residue in the environment have deleterious impacts on human health. The establishment of a rapid and efficient MTM detection method is of great significance. In this study, a magnetic-bead SELEX (systematic evolution of ligands by exponential enrichment) system was developed to select the MTM aptamers with high affinity and specificity. Through 10 rounds of screening, six candidate aptamers with the highest abundance were obtained by high-throughput sequencing. The homology, secondary structure, and affinity analyses were performed. The aptamer named MTM-6 was selected as the optimal aptamer with the dissociation constant (K_d) value of 16 nM. Then, a colorimetric detection method for MTM based on aptamer MTM-6 and the aggregation of gold nanoparticles (AuNPs) induced by NaCl was established with a linear range from 20 to 1000 nM (R = 0.9966) and a limit of detection (LOD) of 4.58 nM. The average recovery rate of MTM in the application of actual aqueous samples ranged from 95.40 to 107.83% with a relative standard deviation (RSD) from 1.11 to 3.48%. With considerable sensitivity and specificity, this colorimetric aptasensor is convenient and efficient, and shows bright application potential in MTM detection in aqueous samples.

Ratiometric fluorescent hydrogel for point-of-care monitoring of organophosphorus pesticide degradation

The residues of organophosphorus pesticides have caused the potential risk in environment and human health, arousing worldwidely great concern. Herein, we fabricated a robust gold nanoclusters/MnO₂ composites-based hydrogel portable kit for accurate monitoring of paraoxon residues and degradation in Chinese cabbages. With the immobilization of gold nanoclusters/MnO₂ composites into a hydrogel, a ratiometric fluorescent signal is generated by catalyzing the oxidation of o-phenylenediamine, which possesses a built-in correction with low background interference. Coupling with acetylcholinesterase catalytic reactions and pesticide inhibition effect, the portable kit can sensitively detect paraoxon residues with a detection limit of 5.0 ng mL^-1. For on-site quantification, the fluorescent color variations of portable kit are converted into digital information that exhibits applicative linear range toward pesticide. Notably, the hydrogel portable kit was successfully applied for precisely monitoring the residue and degradation of paraoxon in Chinese cabbage, providing a potential pathway toward practical point-of-care testing in food safety monitoring.

Digital image colorimetry in combination with chemometrics for the detection of carbaryl based on the peroxidase-like activity of nanoporphyrins and the etching process of gold nanoparticles

Carbaryl is a typical carbamate pesticide that plays an essential role in agricultural production, but its residues cause serious harm to the environment and human health. Here, we developed a polychromatic colorimetric sensor based on ZnTPyP-DTAB peroxidase activity and gold nano-bipyramids (Au NBPs) etching to detect carbaryl. ZnTPyP-DTAB catalyzes the decomposition of H₂O₂ to hydroxyl radicals, and Au NBPs are etched. The coordination of zinc and nitrogen in nanometer porphyrins was affected by the steric effects of carbaryl, which resulted in decreased activity of ZnTPyP-DTAB peroxidase. The detection limit of carbaryl was 0.26 mg/kg. The recoveries of carbaryl in reaal sample ranged from 91 % to 107% (RSD ≤ 0.7%). The sensor platform displayed a series of high-resolution multicolor variations of rainbow colors within the above concentration range. The rich color variation facilitates the acquisition of digital images. RGB value transformation combined with partial least squares regression model can accurately and quantitatively detect carbaryl in vegetables, fruits and Chinese medicinal materials.

Highly catalysis amplification of MOFNd-loaded nanogold combined with specific aptamer SERS/RRS assay of trace glyphosate

A neodymium metal-organic framework (MOFNd) was prepared using 1H-pyrazole-3,5-dicarboxylic acid (H3pdc) and 2-pyrazinecarboxylic acid as ligands. Through the addition of HAuCl4 as a precursor and NaBH4 as a reducing agent, a new MOFNd-loaded nanogold (AuNPs) (Au@MOFNd) nanosol with good stability and high catalytic activity was conveniently prepared via a solvothermal-reduction method and characterized. It was found that the indicator reaction of reducing HAuCl4 by Na2SO3 to generate AuNPs was slow. Au@MOFNd strongly catalyzes this nanoreaction, and the produced AuNPs exhibit a strong resonance Rayleigh scattering (RRS) peak at 370 nm, and a strong surface-enhanced Raman scattering (SERS) peak at 1617 cm-1 with the addition of the molecular probe Victoria blue 4R (VB4r). A novel SERS/RRS di-mode quantitative analysis method for glyphosate (GLY) was established by coupling this new Au@MOFNd catalytic indicator reaction with the aptamer (Apt) reaction of GLY, with SERS and RRS detection limits of 0.02 nM and 0.3 nM, respectively. It has been applied to the analysis of soil samples with a recovery rate of 93.0%-106.5% and precision of 2.2%-4.1%, and the results were satisfactory.

A Portable Fluorescent Hydrogel-Based Device for On-Site Quantitation of Organophosphorus Pesticides as Low as the Sub-ppb Level

Portable devices possess powerful application prospects in on-site sensing without the limitation of bulky instruments. Given the relevance of pesticides to food safety, we herein fabricated a robust gold nanocluster (AuNC)-based hydrogel test kit for precisely quantified chlorpyrifos by using a three-dimensional (3D) printed subsidiary device. In this work, the fluorescence of AuNC-based hydrogel could be efficiently quenched by cobalt oxyhydroxide nanoflakes (CoOOH NFs) through the Förster resonance energy transfer effect. Chlorpyrifos as an acetylcholinesterase inhibitor controls the enzymatic hydrolysis reaction and further regulates the production of thiocholine that could decompose CoOOH nanoflakes into Co2+, resulting in the fluorescence response of AuNC-based hydrogel. By using a homemade subsidiary device and smartphone, the fluorescence color was transformed into digital information, achieving the on-site quantitative detection of chlorpyrifos with the limit of detection of 0.59 ng ml−1. Owing to specific AuNC signatures and hydrogel encapsulation, the proposed fluorescence hydrogel test kit displayed high sensitivity, good selectivity, and anti-interference capability in a real sample analysis, providing great potential in on-site applications.

A liquid colorimetric chemosensor for ultrasensitive detection of glyphosate residues in vegetables using a metal oxide with intrinsic peroxidase catalytic activity

The control of pesticide residues in food is of increasing importance nowadays due to the over-use and misapplication of herbicides in agricultural production. However, the current colorimetric method for rapid detection of glyphosate still faces many challenges like the low sensitivity and stability. Herein, a simple and ultrasensitive liquid colorimetric chemosensor for glyphosate detection was successfully constructed. Glyphosate pesticide can interact with metallic oxidelike porous Co3O4 nanodisc, and inhibit its inherent peroxidase-mimicking activity, making the colour of the solution change from blue to light blue or even colourless. The colour variation of the colorimetric chemosensor enables us to easily distinguish in less than 20 min even by the naked eye whether glyphosate exceeds the allowable level. The limit of detection (LOD) of the chemosensor for glyphosate was calculated as low as 2.37 μg·L-1, and the chemosensor displays excellent selectivity against other competitive pesticides and metal ions. Further studies have also validated the applicability of the colorimetric chemosensor in actual samples like tomato, cucumber and cabbage, indicating that the proposed strategy may have promising application prospects for detecting glyphosate residues in agricultural products.

A Colorimetric Immunoassay Based on g-C3N4@Fe3O4 Nanocomposite for Detection of Carcinoembryonic Antigen

We proposed a colorimetric immunosensor based on g-C₃N₄@Fe₃O₄ nanocomposite-mediated transformation strategy for sensitive detection of carcinoembryonic antigen (CEA). The g-C₃N₄@Fe₃O₄ nanocomposite was synthesized and characterized by the scanning electron microscope (SEM), energy dispersive X-ray spectra (EDX), X-ray powder diffraction (XRD), and Fourier transform infrared spectroscopy (FTIR). Fe³⁺ derived from g-C₃N₄@Fe₃O₄ nanocomposite could combine with sodium salicylate to form purple complex products. Based on this color development, the sandwich colorimetric immunoassay was built by utilizing g-C₃N₄@Fe₃O₄ nanocomposite as nanolabels on the microplate. With the increasement of CEA concentration, the purple color showed a gradient change. Under optimal conditions, the linearity range is 0.001-50 ng/mL with the detection limit of 0.35 pg/mL for CEA. More importantly, the colorimetric immunoassay has good selectivity, specificity, repeatability, and stability.

Aptamer-Target Recognition-Promoted Ratiometric Electrochemical Strategy for Evaluating the Microcystin-LR Residue in Fish without Interferences

Given the significance of food safety, it is highly urgent to develop a sensitive yet reliable sensor for the practical analysis of algal toxins. As most of the developed sensors are disturbed by interfering substances and the target toxin is detected in a single-signal manner based on the immunoassay technology. Herein, we developed an aptamer-based dual-signal ratiometric electrochemical sensor for the sensitive and accurate analysis of microcystin-LR (MC-LR), using it as a proof-of-concept analyte. Methylene blue-tagged ssDNA (MB-ssDNA) was immobilized at the gold electrode surface accompanied with the absence of ferrocene-tagged ssDNA (Fc-ssDNA), resulting in a high differential pulse voltammetry (DPV) current of MB and a low DPV current of Fc. The recognition of MB-ssDNA by MC-LR stimulated the formation of MC-LR@MB-ssDNA, which induced the removal of MB-ssDNA from the electrode and the exposure of SH-ssDNA, enabling Fc-ssDNA to be captured at the electrode surface via nucleic acid hybridization. In comparison with MC-LR deficiency, the DPV signal of MB dropped along with an improved DPV signal of Fc, contributing to the ratiometric detection of MC-LR, with the limit of detection down to 0.0015 nM. Furthermore, this ratiometric electrochemical sensor was successfully explored to assess the bioaccumulated amount of MC-LR in the liver and meat of fish. The aptamer-based ratiometric strategy to develop an electrochemical MC-LR assay will offer a promising avenue to develop high-performance sensors, and the sensor will find more useful application in MC-LR-related aquatic product safety studies.

Nanozyme-Participated Biosensing of Pesticides and Cholinesterases: A Critical Review

To improve the output and quality of agricultural products, pesticides are globally utilized as an efficient tool to protect crops from insects. However, given that most pesticides used are difficult to decompose, they inevitably remain in agricultural products and are further enriched into food chains and ecosystems, posing great threats to human health and the environment. Thus, developing efficient methods and tools to monitor pesticide residues and related biomarkers (acetylcholinesterase and butylcholinesterase) became quite significant. With the advantages of excellent stability, tailorable catalytic performance, low cost, and easy mass production, nanomaterials with enzyme-like properties (nanozymes) are extensively utilized in fields ranging from biomedicine to environmental remediation. Especially, with the catalytic nature to offer amplified signals for highly sensitive detection, nanozymes were finding potential applications in the sensing of various analytes, including pesticides and their biomarkers. To highlight the progress in this field, here the sensing principles of pesticides and cholinesterases based on nanozyme catalysis are definitively summarized, and emerging detection methods and technologies with the participation of nanozymes are critically discussed. Importantly, typical examples are introduced to reveal the promising use of nanozymes. Also, some challenges in the field and future trends are proposed, with the hope of inspiring more efforts to advance nanozyme-involved sensors for pesticides and cholinesterases.

Porous Co3O4 nanodisks as robust peroxidase mimetics in an ultrasensitive colorimetric sensor for the rapid detection of multiple heavy metal residues in environmental water samples

The current method for rapid and ultrasensitive detection of multiple heavy metals in environmental water still face challenge. Herein, the porous Co₃O₄ nanodisks with robust peroxidase-mimicking activity were prepared, and its catalytic activity can be significantly inhibited by the heavy metals like Cd(II), Hg(II), Pb(II) and As, which makes us to establish an ultrasensitive and rapid colorimetric sensor for the detection of multiple heavy metals. Further investigation reveals the anticompetitive inhibition effect of heavy metals on peroxidase-mimicking activity. The colorimetric sensor displays excellent sensitivity and selectivity, and the limits of detection (LOD) for Cd(II), Hg(II), Pb(II) and As are 0.085 μg·L^-1, 0.19 μg·L^-1, 0.2 μg·L^-1 and 0.156 μg·L^-1, respectively. Notably, the absorbance variation will be greater than 0.5 as the concentration of heavy metals exceeds 5 μg·L^-1, which can be clearly discriminated by the naked eyes. Moreover, the average recovery range of heavy metals in actual water samples is from 86.9% to 98.3%. The above results indicate that the proposed sensor exhibits excellent practical applicability for the rapid and ultrasensitive detection of multiple harmful heavy metals in several environmental water samples, which has potential bright application in protecting the environment and human health.