Effect of Nitrogen Management on the Structure and Physicochemical Properties of Rice Starch

Combined effects of nitrogen and sulfur fertilizers on chemical composition, structure and physicochemical properties of buckwheat starch

Buckwheat starch has attracted worldwide attention in the food industry as a valuable raw material or food additive. Nitrogen (N) and sulfur (S) are two nutrients essential to ensure grain quality. This study investigated the combined application of N fertilizer (0, 45 and 90 kg N ha-1) and S fertilizer (0 and 45 kg SO3 ha-1) on the chemical composition, structure and physicochemical properties of buckwheat starch. The results showed that increasing the fertilizer application decreased amylose content and starch granule size but increased light transmittance, water solubility and swelling power. The stability of the absorption peak positions and the decrease in short-range order degree suggested that fertilization influenced the molecular structure of buckwheat starch. In addition, increases in viscosity and gelatinization enthalpy as well as decreases in gelatinization temperatures and dynamic rheological properties indicated changes in the processing characteristics and product quality of buckwheat-based foods.

Starch-related structural basis and enzymatic mechanism of the different appearances of soft rice

To investigate the fine starch structure characteristics and formation mechanism of high-quality appearance soft rice, two high-quality and low-quality soft rice varieties (HA-SR and LA-SR, respectively) were selected. Differences in appearance quality, fine starch structure, and activity of key enzymes involved in starch synthesis during the grain-filling stage were compared. The results showed that compared with LA-SR, HA-SR were less chalky, more transparent, had larger starch grains, a lower content of shorter chains (DP 6-24), a higher content of longer chains (DP ≥ 25), lower relative crystallinity, fewer ordered structures, more amorphous structures and larger thicknesses of semi-crystalline lamellae. In terms of amylase activity during the grain-filling stage, the AGPase and GBSS activities of HA-SR were higher, and the SBE activity of HA-SR was lower compared to LA-SR. In conclusion, higher AGPase activity can produce a higher filling rate resulting in fuller starch grain in soft rice. Fuller starch grains reduce the chalkiness of soft rice. Higher AGPase and GBSS activities and lower SBE activity can result in soft rice with more long-branched and less short-branched amylopectin. Thus, soft rice has lower relative crystallinity and less ordered structure. These structures may facilitate reduce grain chalkiness and improve grain transparency.

Effect of nitrogen fertilizer on the quality traits of Indica rice with different amylose contents

BACKGROUND

Nitrogen is a key factor affecting the quality of rice. Studying the impact of nitrogen fertilizer on the taste, physicochemical properties, and starch structure of Indica rice with different amylose contents is of great significance for scientifically fertilizing and cultivating high-quality rice varieties for consumption.

RESULTS

The results indicate that increasing nitrogen fertilizer application reduces the amylose content and increases the protein content, resulting in a decrease in taste quality. Simultaneously, it reduces the intergranular porosity of starch particles, improving the appearance and milling quality of rice. Compared to the N1 treatment (nitrogen fertilizer application rate of 90 kg ha-1), the taste of low-amylose rice (Yixiangyou 2115) and high-amylose rice (Byou 268) decreased by 14.24% and 19.79%, respectively, under N4 treatment (nitrogen fertilizer application rate of 270 kg ha-1). The effect of nitrogen fertilizer on low-amylose rice is mainly reflected in increased rice hardness, enthalpy value, and setback viscosity, resulting in a decline in taste. The effect of nitrogen fertilizer on high-amylose rice is mainly reflected in a decrease in peak viscosity, an increase in gelatinization temperature, and crystallinity under high nitrogen levels.

CONCLUSION

Increasing nitrogen fertilizer application can improve the appearance and milling quality of rice, but it also leads to an increase in protein content, hardness, gelatinization enthalpy, decrease in breakdown value, and a decline in palatability. In practical production, different production measures should be taken according to different production goals. © 2024 Society of Chemical Industry.

Effect of Different Fertilizer Types on Quality of Foxtail Millet under Low Nitrogen Conditions

In order to clarify the effect of different fertilizers on foxtail millet quality under low nitrogen conditions, we used JGNo.21 and LZGNo.2 as experimental materials and set up five treatments, including non-fertilization, nitrogen, phosphorus, compound, and organic fertilizers, to study the regulation of different fertilizer types on agronomic traits, nutrient fractions, and pasting characteristics of foxtail millet under low nitrogen conditions. Compared with the control, all of the fertilizers improved the agronomic traits of JGNo.21 to a certain extent. Nitrogen and compound fertilizer treatments reduced the starch content of JGNo.21; the starch content was reduced by 0.55% and 0.07% under nitrogen and compound fertilizers treatments. Phosphorus and organic fertilizers increased starch content, and starch content increased by 0.50% and 0.56% under phosphorus and organic fertilizer treatments. The effect of each fertilizer treatment on protein content was completely opposite to that of starch; different fertilizer treatments reduced the fat content of JGNo.21 and increased the fiber content. Among them, nitrogen and phosphorus fertilizers increased the yellow pigment content; the yellow pigment content increased by 1.21% and 2.64% under nitrogen and phosphorus fertilizer treatments. Organic and compound fertilizers reduced the content of yellow pigment; the yellow pigment content was reduced by 3.36% and 2.79% under organic and compound fertilizer treatments. Nitrogen and organic fertilizers increased the fat content of LZGNo.2; the fat content increased by 2.62% and 1.98% under nitrogen, organic fertilizer treatment. Compound and phosphorus fertilizer decreased the fat content; the fat content decreased by 2.16% and 2.90% under compound and phosphorus fertilizer treatment. Different fertilizer treatments reduced the cellulose and yellow pigment content of LZGNo.2. The content of essential, non-essential, and total amino acids of JGNo.21 was increased under compound and nitrogen fertilizer treatments and decreased under organic and phosphorus fertilizer treatments. The content of essential, non-essential, and total amino acids of LZGNo.2 was significantly higher under compound, nitrogen, and organic fertilizer treatments compared with control and significantly decreased under phosphorus fertilizer treatments. Nitrogen and compound fertilizer treatments significantly reduced the values of peak viscosity, trough viscosity, breakdown viscosity, final viscosity, setback viscosity, and pasting time of each index of JGNo.21; phosphorus and organic fertilizer treatments improved the values of each index. In contrast, the pasting viscosity of LZGNo.2 increased under phosphorus fertilizer treatment and decreased under nitrogen fertilizer treatment. Reasonable fertilization can improve the quality of foxtail millet, which provides a scientific theoretical basis for improving the quality of foxtail millet.

Study of the changes on the physicochemical properties of isolated lentil starch during germination

In this work, the changes in the composition of the flours and in the morphological, structural, thermal, vibrational, rheological, and functional properties of the isolated lentil starch during the germination process were investigated. The fiber, fat, and ash content of the flours decreased and the protein content increased, while the apparent amylose content of the starch granules remained constant. Using scanning electron microscopy (SEM), the starch granules remained intact during germination, and no enzymatic activity of α- and β-amylases was observed. X-ray diffraction shows that the starch has nanocrystals with hexagonal structure which predominate over the nanocrystals with orthorhombic structure and are classified as C-type starch. The most important result is that these nanocrystals do not play an important role during germination. As the germination time progresses, differential scanning calorimetry (DSC) shows a decrease in the gelatinization temperature (Tp) of the starch, ranging from 70.34 ± 0.25 °C for the native lentil starch to values of 67.16 ± 0.37 °C for the starch on the fourth day of germination (ILS4), this transition being related to the solvation of the nanocrystals. On the other hand, the pasting profiles show no significant changes during germination, indicating that no significant changes in starch content occur during germination. Starch degradation is essential for the production of malt for fermented beverages. This fact makes sprouted lentils not a candidate for the short-term fermentation required in the beverage industry.

Optimization of the morphological, structural, and physicochemical properties of maize starch using straw returning and nitrogen fertilization in Northeast China

The combination of straw returning and nitrogen (N) fertilization is a popular tillage mode and essential strategy for achieving stable yield and high quality. However, the optimal combination strategy and the influence of tillage mode on the morphological, crystalline, and molecular structures of maize starch remain unclear. We conducted a long-term field experiment over 7 years in Northeast China using two tillage modes, rotary tillage with straw returning (RTS) and plow tillage with straw returning (PTS), and four N application rates. The relative crystallinity, 1045/1022 cm-1 value, and B2 and B3 chains of maize starch were higher under RTS than under PTS, resulting in increased stability of starch and improvements in gelatinization enthalpy and temperature. The surface of the starch granules induced by N fertilizer was smoother than that under the N0 (0 kg N ha-1) treatment. The proportion of amylose content, solubility, swelling power, and light transmittance increased under N2 (262 kg N ha-1) treatment, along with improvement in starch pasting properties. These results suggest that RTS combined with N2 treatment can regulate the morphological, structural, and physicochemical characteristics of maize starch, providing an essential reference for improving the quality of maize starch from an agronomic point of view.

Transcriptome analysis reveals the mechanism of nitrogen fertilizers in starch synthesis and quality in waxy and non-waxy proso millet

Recent findings suggest that optimal application of nitrogen fertilizers can effectively improve the quality of proso millet (PM). Here, we aimed to investigate the pathways associated with starch synthesis and metabolism to elucidate the effect and molecular mechanisms of nitrogen fertilization in starch synthesis and properties in waxy and non-waxy PM varieties using transcriptomic techniques. Co-expression network analysis revealed that the regulation of starch synthesis and quality in PM by nitrogen fertilizer mainly occurred in the S2 and S3 stages during grain filling. Nitrogen fertilization inhibited glycolysis/gluconeogenesis and starch biosynthesis in grains, but increased starch degradation to maltose and dextrin and then to glucose. Moreover, nitrogen fertilization increased starch accumulation by upregulating the expression of SuS and malZ genes, thereby increasing the total starch content in grains. In contrast, nitrogen fertilization suppressed the expression of GBSS gene and decreased amylose content in PM grains, resulting in a relatively higher crystallinity, light transmittance, and breakdown viscosity in the two PM varieties. Overall, these results provided transcriptomics insights into the molecular mechanisms by which nitrogen fertilization regulates starch quality in PM, identified key genes that associated with the starch properties, and provided new insights into the quality cultivation of PM.

Nitrogen fertilizer affects the cooking quality and starch properties of proso millet (Panicum miliaceum L.)

Nitrogen has a critical influence on the yield and quality of proso millet. However, the exact impact of nitrogen on the cooking quality of proso millet is not clear. In this study, the cooking quality and starch properties of two proso millet varieties (waxy-Shaanxi millet [wSM] variety and non-waxy-Shaanxi millet [nSM] variety) were compared and analyzed under nitrogen fertilizer treatment (N150, 150 kg/hm2) and a control group without nitrogen application (N0, 0 kg/hm2). Compared with the N0 group, the N150 treatment significantly increased protein content, amylose levels, and total yield. Employing rapid visco analyser and differential scanning calorimetry analyses, we observed that under the N150 treatment, the peak viscosity and breakdown viscosity of proso millet powder were diminished, while the setback viscosity and enthalpy values (ΔH) increased. In addition, nitrogen treatment increased the solids content in the obtained rice soup and significantly hardened the texture of the rice. At the same time, we noticed that the absorption capacity of starch in water and oil was enhanced. These results showed that nitrogen fertilizer had significant effects on the cooking quality and starch properties of proso millet.

Long-term straw return improves cooked indica rice texture by altering starch structural, physicochemical properties in South China

Straw return can improve rice eating quality by modifying starch formation from long-term field trials, whereas the relevant mechanisms are still unknown. A long-term field experiment, including straw removal (CK), straw burning return (SBR), and straw return (SR) was conducted to investigate the starch structure, physicochemical properties, and cooked rice textures of indica early- and late-rice. Compared with CK, SBR and SR enhanced relative crystallinity, amylopectin long chains in both rice seasons, and gelatinization temperatures in late rice. Compared to SBR, SR decreased protein content and amylopectin short chains but increased starch branching degree, breakdown, and stickiness, ultimately contributing to improved starch thermal and pasting properties. Meanwhile, SR decreased hardness, cohesiveness, and chewiness, resulting in cooked texture meliorated, which was mainly attributed to amylopectin chain length and starch granule size. The results suggest that SR increased cooked texture of indica rice by altering starch structural and physicochemical properties.

Starch multiscale structure and physicochemical property alterations in high-quality indica rice quality and cooked rice texture under different nitrogen panicle fertilizer applications

The starch multiscale structure, physiochemical properties, grain quality and cooked rice texture of high-quality early and late indica were analyzed under nitrogen panicle fertilizer (low panicle fertilizer, LPF; middle panicle fertilizer, MPF; high panicle fertilizer, HPF) treatments and their internal relations were investigated. Compared to the MPF treatment, the starch granules in HPF and LPF had more surface-proteins and irregular voids for high-quality early and late indica rice cultivars, respectively. Nitrogen panicle fertilization application increased amylopectin medium and long chains as well as protein content, resulting in higher relative crystallinity and gelatinization temperatures. Moderate changes in starch multistructures and physicochemical properties such as branching degree, amylopectin medium chain, and pasting viscosities derived from MPF treatment significantly improved processing, appearance qualities and cooked rice texture. Additionally, the decrease in starch branching, gelatinization temperatures, and granule uniformity along with an increase in large granules, breakdown, and △Hgel under MPF treatment were the main reasons for improving rice textural properties.

Strategies for starch customization: Agricultural modification

Raw starch is commonly modified to enhance its functionality for industrial applications. There is increasing demand for 'green' modified starches from both end-consumers and producers. It is well known that environmental conditions are key factors that determine plant growth and yield. An increasing number of studies suggest growth conditions can expand affect starch structure and functionality. In this review, we summarized how water, heat, high nitrogen, salinity, shading, CO2 stress affect starch biosynthesis and physicochemical properties. We define these treatments as a fifth type of starch modification method - agricultural modification - in addition to chemical, physical, enzymatic and genetic methods. In general, water stress decreases peak viscosity and gelatinization enthalpy of starch, and high temperature stress increases starch gelatinization enthalpy and temperature. High nitrogen increases total starch content and regulates starch viscosity. Salinity stress mainly regulates starch and amylose content, both of which are genotype-dependent. Shading stress and CO2 stress can both increase starch granule size, but these have different effects on amylose content and amylopectin structure. Compared with other modification methods, agricultural modification has the advantage of operating at a large scale and a low cost and can help meet the ever-rising market of clean-label foods and ingredients.

Physicochemical Properties of the Rice Flour and Structural Features of the Isolated Starches from Saline-Tolerant Rice Grown at Different Levels of Soil Salinity

Three varieties of saline-tolerant indica rice were grown in soils with salinities of 0.0-0.6% (w/w). The rice grown at salinities of 0.3 and 0.6% had a smaller grain dimension than its counterpart. Salinity stress altered the physiology of plants, leading to changes in the basic chemical compositions for all rice varieties, e.g., increasing the soil salinity improved the content of rice protein (RP). The pasting and rheological properties of the rice flour highly depended on its chemical compositions. An increase of RP inhibited the swelling of starch granules and accordingly decreased the peak viscosity of rice flour, while the aggregation of RP weakened the gel structure of the cooked rice flour. The isolated starches showed polyhedral granules, and they all had an A-type crystalline structure with relative crystallinity varying from 34.16 to 45.40%. Moreover, increasing the soil salinity enhanced the lamellar order and periodic length of the isolated starches.

Nitrogen fertilizer affects starch synthesis to define non-waxy and waxy proso millet quality

Understanding the effect of nitrogen fertilization on the quality of proso millet is key to expanding the use of this crop to address water scarcity and food security. Therefore, this study determined the impact of nitrogen fertilization on the proso millet quality. Nitrogen fertilization significantly increased the NR and GS activities and decreased the GBSSase activity, resulting in an increase in protein content and reduction in amylose content and L*, which decreased the appearance quality. Nitrogen fertilization increased the proportion of short amylopectin chains, resulting in a more disordered carbohydrate structure, and decreased the proportion of hydrophilic functional groups, contributing to an increase in setback viscosity and decrease in pasting temperature in the waxy (w139) variety. In contrast, the non-waxy (n297) variety exhibited a larger proportion of long amylopectin chains, lower ordered structure and hydrophobic functional groups after nitrogen fertilization, which strengthened the inter- and intramolecular forces of starch colloids.

Variation of rice starch structure and physicochemical properties in response to high natural temperature during the reproductive stage

Climate warming affects rice growth at different phenological stages, thereby increasing rice chalkiness and protein content and reducing eating and cooking quality (ECQ). The structural and physicochemical properties of rice starch played important roles in determining rice quality. However, differences in their response to high temperature during the reproductive stage have been rarely studied. In the present study, they were evaluated and compared between two contrasting natural temperature field conditions, namely, high seasonal temperature (HST) and low seasonal temperature (LST), during the reproductive stage of rice in 2017 and 2018. Compared with LST, HST significantly deteriorated rice quality, including increased grain chalkiness, setback, consistence, and pasting temperature and reduced taste values. HST considerably reduced the total starch and increased the protein content. Likewise, HST significantly reduced the short amylopectin chains [degree of polymerization (DP) <12] and increased the long amylopectin chains (DP > 12) and relative crystallinity. The starch structure, total starch content, and protein content explained 91.4%, 90.4%, and 89.2% of the total variations in pasting properties, taste value, and grain chalkiness degree, respectively. In conclusion, we suggested that rice quality variations were closely associated with the changes in chemical composition content (total starch and protein content) and starch structure in response to HST. These results indicated that we should improve the resistance of rice to high temperature during the reproductive stage to improve the fine structure of rice starch in further breeding and practice.

Starch Physicochemical Properties of Normal Maize under Different Fertilization Modes

Improving the quality with desired functions of natural starch through agronomic practice will meet the increasing need of people for natural, functional foods. A one-off application of slow-release fertilizer is a simple and efficient practice in maize production, though its influence on the starch quality is scarce. In the present study, the structural and functional properties of the starch of normal maize under two fertilization modes (one-off application of slow-release fertilizer at the sowing time (SF), and three applications of conventional fertilizer at the sowing time, and topdressing at the jointing and flowering stages (CF)) under the same fertilization level (N/P₂O₅/K₂O = 405/135/135 kg/ha) were studied using Jiangyu877 (JY877) and Suyu30 (SY30) as materials. The observed results indicate that the size of starch granules was enlarged by fertilization and the size was the largest under CF in both hybrids. The amylose content was unaffected by CF and reduced by SF in both hybrids. In comparison to no fertilizer (0F), the peak 1/peak 2 ratio was decreased by CF in both hybrids, whereas the ratio under SF was unaffected in JY877 and decreased in SY30. The amylopectin average chain-length was reduced by fertilization and the reduction was higher under CF in JY877. The relative crystallinity was increased by CF in both hybrids and the value under SF was unaffected in SY30 and increased in JY877. The peak, trough, and final viscosities of starch were increased by fertilization in both hybrids. The starch thermal characteristics in response to fertilization modes were dependent on hybrids. The retrogradation enthalpy and percentage were increased by CF in both hybrids, whereas those two parameters under SF were increased in SY30 and decreased in JY877. In conclusion, starch with similar granule size, higher peak 1/peak 2 ratio, and lower relative crystallinity was obtained under SF than under CF for both hybrids. Longer amylopectin chain-length was observed in JY877, which induced lower pasting viscosities in SY30 and lower retrogradation characteristics in JY877.

Nitrogenous Fertilizer Levels Affect the Physicochemical Properties of Sorghum Starch

Nitrogen is a key factor affecting sorghum growth and grain quality. This experiment was designed to investigate the physicochemical properties of sorghum starch in four sorghum varieties (Liaoza 10, Liaoza 19, Jinza 31, and Jinza 34) under four nitrogen levels: 0 kg/ha urea (N1), 300 kg/ha urea as base fertilizer (N2), 300 kg/ha urea as topdressing at the jointing stage (N3), and 450 kg/ha urea as topdressing at the jointing stage (N4). The results showed that grain size and amylose content increased with increasing nitrogen fertilizer level, peaking at N3. The peak viscosity, final viscosity, gelatinization temperature, initial temperature, final temperature, and enthalpy value increased with the nitrogenous fertilizer level, peaking at N3. The application of nitrogen fertilizer at the jointing period significantly increased the above indicators. However, excess nitrogen at the jointing period (N4) can significantly reduce the above indicators, thus changing the physicochemical properties and structure of sorghum starch. Overall, nitrogen significantly affects the structure and physicochemical properties of sorghum starch.

Response of yield and quality of giant embryo rice to nitrogen application and analysis of lipid-lowering effect

Giant embryo rice is known as a highly nutritious functional rice because it is rich in gamma-aminobutyric acid (GABA), which has various regulatory functions in the human body. To study the response of giant embryo rice yield and quality to nitrogen (N) application, and to verify the effect of giant embryo brown rice on alleviating hyperlipidemia in rats. In this study, field experiments were conducted in 2020 and 2021 using the giant embryo rice varietiers J20 (japonica) and Koshihikari (japonica) rice as experimental materials and five N levels, 0 (N₀), 90 (N₁), 135 (N₂), 180 (N₃) and 225 (N₄) kg ha^-1. The results showed that the yield of both varieties increased with increasing N and the maximum values were observed under the N₂ treatment. As more N was gradually applied, the brown rice rate, milled rice rate, head rice rate and GABA content of both varieties first increased and then decreased, while the chalky grain rate and chalkiness showed the opposite trend. The optimal values of these indexes were observed under the N₂ treatment. The peak viscosity and breakdown value of J20 decreased, while its setback value and pasting temperature increased with increasing N. In contrast, Koshihikari showed the opposite trend. The protein content and protein component contents of both varieties showed an increasing trend with increasing N, among which gliadin was the most sensitive protein component to N fertilizer. Animal experiments results showed that J20 brown rice could significantly slow the rate of weight gain of rats, reduce serum total cholesterol and triglyceride levels and increase high-density lipoprotein cholesterol levels. Therefore, increasing N could effectively enhance J20 yield and improve processing, appearance and nutritional quality but decrease cooking and eating quality. The brown rice J20 had the effect of slowing the rate of weight gain and reducing the hyperlipidemia level of rats, the optimal N application rate for achieving high yield, high quality and good functional characteristics in the giant embryo rice J20 was 135 kg ha^-1. These findings will provide a theoretical and technical foundation for the popularization and application of giant embryo rice in the future.

Relationship between nitrogen fertilizer and structural, pasting and rheological properties on common buckwheat starch

Nitrogen is an essential element for the yield and quality of grain. In this study, the structural and physicochemical properties of two common buckwheat varieties under four nitrogen levels (0, 90, 180, 270 kg N ha^-1) at one location in two years were investigated. With increasing nitrogen level, the contents of moisture and amylose decreased but the contents of ash and crude protein increased. Excessive nitrogen application significantly increased the granule size, but reduced the light transmittance, water solubility, swelling power, absorption of water and oil. All the samples showed a typical A - type pattern, while high relative crystallinity and low order degree were observed under high nitrogen level. The samples under high nitrogen level had lower textural properties, pasting properties and rheological properties but higher pasting temperature and gelatinization enthalpy. These results indicated that nitrogen fertilizer significantly affected the structural and physicochemical properties of common buckwheat starch.

The Starch Physicochemical Properties between Superior and Inferior Grains of Japonica Rice under Panicle Nitrogen Fertilizer Determine the Difference in Eating Quality

Nitrogen fertilizer is essential for rice growth and development, and topdressing nitrogen fertilizer at panicle stage has a huge impact on rice grain quality. However, the effect of panicle nitrogen fertilizer (PNF) on starch physicochemical properties and fine structure remain unclear. In this study, four PNF levels (0, 60, 120, 180 kg N ha−1) were grown with the same basal and tiller fertilizer (150 kg N ha−1). The starch physicochemical properties, fine structure, texture properties and eating quality of two japonica rice were determined. We found that the content of total protein, crude fat and amylose between superior and inferior grains were significantly different. Compared with inferior grains, superior grains had low relative crystallinity, good pasting characteristics and outstanding eating quality. With the increase of nitrogen application rates, the starch volume mean diameter was lower; the average chain length of amylopectin was longer; and the relative crystallinity of starch was higher. The changes above in starch structure resulted in an increase in starch solubility, swelling power and gelatinization enthalpy, and led to a decrease in retrogradation enthalpy, retrogradation percentage and pasting viscosity, consequently contributing to the increase in hardness and stickiness of rice and the deterioration of taste value. These results indicated that topdressing PNF lengthened the amylopectin chain, decreased starch granule size, enhanced crystallization stability and increased gelatinization enthalpy, which were the direct reasons for the deterioration of cooking and eating quality.

Effects of Wx Genotype, Nitrogen Fertilization, and Temperature on Rice Grain Quality

Quality is a complex trait that is not only the key determinant of the market value of the rice grain, but is also a major constraint in rice breeding. It is influenced by both genetic and environmental factors. However, the combined effects of genotypes and environmental factors on rice grain quality remain unclear. In this study, we used a three-factor experimental design to examine the grain quality of different Wx genotypes grown under different nitrogen fertilization and temperature conditions during grain development. We found that the three factors contributed differently to taste, appearance, and nutritional quality. Increased Wx function and nitrogen fertilization significantly reduced eating quality, whereas high temperature (HT) had almost no effect. The main effects of temperature on appearance quality and moderate Wx function at low temperatures (LTs) contributed to better appearance, and higher nitrogen fertilization promoted appearance at HTs. With regard to nutritional quality, Wx alleles promoted amylose content (AC) as well as starch-lipids content (SLC); nitrogen fertilization increased storage protein content (PC); and higher temperature increased lipid content but decreased the PC. This study helps to broaden the understanding of the major factors that affect the quality of rice and provides constructive messages for rice quality improvement and the cultivation of high-quality rice varieties.

Combined Effect of Nitrogen Fertilizer Application and High Temperature on Grain Quality Properties of Cooked Rice

Ambient temperature and nitrogen (N) fertilizer are two of the most important factors that affect rice grain quality. However, less information has been available on the interactive effect of N fertilizer and ambient temperature on grain quality under stressful high temperature (HT). In this article, the effects of panicle N fertilizer, ambient temperature, and their interaction on starch composition, particle size distribution of starch granules, starch physicochemical properties, and storage protein accumulation in milled grains were investigated to clarify the potential role of panicle N fertilizer topdressing in regulating rice grain quality under stressful HT by using a two-factor experiment of three N levels in combination with two temperature regimes. Results showed that appropriate application of panicle N fertilizer could attenuate the adverse effect of HT during grain filling on milling quality and chalky occurrence to some extent, particularly for the effective alleviation of HT-induced decrease in milling quality. However, the topdressing of panicle N fertilizer tended to enhance starch gelatinization enthalpy (ΔH) and its setback viscosity in HT-ripening grains, with the simultaneous decrements in the number and surface area proportions of smaller starch granules under the higher N fertilizer in combination with HT exposure. The effects of higher nitrogen fertilizer and HT exposure on total protein content and gluten composition of grains were additively increased. Hence, the topdressing of panicle N fertilizer exacerbated HT-induced deterioration in cooking and eating quality, rather than alleviating the negative impact of HT exposure on the palatability of cooked rice.

Effect of chemical fertilizer reduction on the quality of hybrid rice of different amylose contents

To promote the reduction and efficiency of chemical fertilizers in rice production, two hybrid rice varieties with different amylose contents (16.43% and 27.58%) were selected to study the yield and quality performance of different quality rice varieties under reduced nitrogen/phosphorus conditions. Thus, the specific mechanism of the long-term nitrogen/phosphorus reduction effect on the quality of low- and high-amylose content (16.43% and 27.58%) rice was investigated by comparative analyses of the rapid visco analyzer and X-ray diffraction patterns, amylose contents, and starch structures of the samples. The results revealed that the effect of nitrogen fertilizer on the quality and yield of the hybrid rice was greater than that of phosphorus fertilizer. Indeed, reducing the former increased the Wx gene expression and amylose content of the rice varieties. Moreover, it reduced the starch crystallinity of Yixiangyou 1108 (2.16%), increasing the space between the starch grains and thus, chalkiness. Reducing nitrogen/phosphorus application did not significantly affect the yield and quality of the high-amylose rice but affected that of the high-quality rice with lower amylose contents. Thus, for high-amylose rice created for processing, appropriate chemical fertilizer reduction will not affect their yield and processing demand. PRACTICAL APPLICATIONS: Fertilization with different nitrogen and phosphorus fertilizers will seriously affect rice quality. The rice varieties with low amylose content (AC) could produce high taste quality rice by increasing nitrogen fertilizer and decreasing phosphorus fertilizer. The rice varieties with relatively high ACs should reduce the application of nitrogen/phosphorus fertilizer to appropriately increase AC, which can be used to produce healthy food with high resistant starch.

Identification of High Nitrogen Use Efficiency Phenotype in Rice (Oryza sativa L.) Through Entire Growth Duration by Unmanned Aerial Vehicle Multispectral Imagery

Identification of high Nitrogen Use Efficiency (NUE) phenotypes has been a long-standing challenge in breeding rice and sustainable agriculture to reduce the costs of nitrogen (N) fertilizers. There are two main challenges: (1) high NUE genetic sources are biologically scarce and (2) on the technical side, few easy, non-destructive, and reliable methodologies are available to evaluate plant N variations through the entire growth duration (GD). To overcome the challenges, we captured a unique higher NUE phenotype in rice as a dynamic time-series N variation curve through the entire GD analysis by canopy reflectance data collected by Unmanned Aerial Vehicle Remote Sensing Platform (UAV-RSP) for the first time. LY9348 was a high NUE rice variety with high Nitrogen Uptake Efficiency (NUpE) and high Nitrogen Utilization Efficiency (NUtE) shown in nitrogen dosage field analysis. Its canopy nitrogen content (CNC) was analyzed by the high-throughput UAV-RSP to screen two mixed categories (51 versus 42 varieties) selected from representative higher NUE indica rice collections. Five Vegetation Indices (VIs) were compared, and the Normalized Difference Red Edge Index (NDRE) showed the highest correlation with CNC (r = 0.80). Six key developmental stages of rice varieties were compared from transplantation to maturation, and the high NUE phenotype of LY9348 was shown as a dynamic N accumulation curve, where it was moderately high during the vegetative developmental stages but considerably higher in the reproductive developmental stages with a slower reduction rate. CNC curves of different rice varieties were analyzed to construct two non-linear regression models between N% or N% × leaf area index (LAI) with NDRE separately. Both models could determine the specific phenotype with the coefficient of determination (R 2) above 0.61 (Model I) and 0.86 (Model II). Parameters influencing the correlation accuracy between NDRE and N% were found to be better by removing the tillering stage data, separating the short and long GD varieties for the analysis and adding canopy structures, such as LAI, into consideration. The high NUE phenotype of LY9348 could be traced and reidentified across different years, locations, and genetic germplasm groups. Therefore, an effective and reliable high-throughput method was proposed for assisting the selection of the high NUE breeding phenotype.

Analysis of synthesis, accumulation and physicochemical properties of Tartary buckwheat starches affected by nitrogen fertilizer

Nitrogen fertilizer is a crucial factor affecting the growth and grain quality of Tartary buckwheat. This study was to investigate the synthesis, accumulation, and physicochemical properties of Tartary buckwheat starches under four nitrogen levels (0, 90, 180, 270 kg N ha^-1). The results showed that activities of four key enzymes, starch contents all first increased and then decreased with increasing nitrogen levels, and peaked at 180 kg N ha^-1. All the starches showed typical A-type, while higher nitrogen levels significantly increased the relative crystallinity. The viscosities significantly decreased, onset, peak, and conclusion first decreased and then increased, while pasting temperature and gelatinization enthalpy increased with increasing nitrogen levels. Nitrogen fertilizer and year had significant effects on the synthesis, accumulation and physicochemical properties of Tartary buckwheat starch, and the nitrogen level of 180 kg N ha^-1 was more suitable for planting in the northern area of the Loess Plateau.

Effects of mid-stage nitrogen application timing on the morphological structure and physicochemical properties of japonica rice starch

BACKGROUND

Nitrogen management of crops, especially when mid-stage nitrogen is applied, is a key factor affecting the yield and grain quality of rice (Oryza sativa). Here, the timing of mid-stage nitrogen application was evaluated for its effect on rice grain quality by assessing the morphological structure and physicochemical properties of starch from two japonica rice cultivars growing in fields (Nangeng 9108 and Nangeng 5055).

RESULTS

The experiment was arranged in a split-plot design, with the two rice cultivars as the main plot factor and three timings of mid-stage nitrogen application as the within-plot factor. Briefly, three applications were made: at the emergence of the top-sixth-leaf (ahead), the top-fourth-leaf (normal), and the top-second-leaf (delayed) of the main stem. Delaying mid-stage nitrogen application caused the starch granule surface to become uneven and significantly reduced its particle size, whereas it increased the polished rice rate, chalkiness degree, and protein content. Furthermore, the apparent amylose content decreased with a delay in mid-stage nitrogen application, thereby resulting in higher relative crystallinity, swelling power, water solubility, gelatinization enthalpy, and low retrogradation. Finally, we also found that delaying this nitrogen application lowered the characteristic values of rice flour viscosities, leading to cooking quality deterioration.

CONCLUSION

These results therefore suggest that delaying mid-stage nitrogen application enhances the processing and nutritional qualities of japonica rice but evidently has an adverse effect upon its appearance and cooking qualities. © 2020 Society of Chemical Industry.

Diverse effects of nitrogen fertilizer on the structural, pasting, and thermal properties of common buckwheat starch

At present, the yield of common buckwheat, which is mainly grown in northern Shaanxi of China, is low and the grain quality is poor. Nitrogen is an important nutrient for the growth of common buckwheat, and appropriate nitrogen application can improve the grain quality. Nitrogen fertilizer could alter the starch granule morphology shapes and the granule size distribution. With increasing nitrogen levels, branch number, flower clusters number, grain number per plant, contents of protein and fat, size distribution of "C" granules, and percentages of light transmittance significantly increased, whereas amylose content and retrogradation decreased. All the samples displayed typical A-type X-ray diffraction patterns. Starch showed higher pasting temperature and gelatinization enthalpy but lower trough and final viscosities under high nitrogen levels. These results suggested N₂ treatment was more suitable for common buckwheat growth, principal components and correlation analysis revealed that nitrogen fertilizer significantly affected the physicochemical properties of common buckwheat starches.

Rice starch accumulation at different endosperm regions and physical properties under nitrogen treatment at panicle initiation stage

The quality of rice grain is characterized by the component, structure and physicochemical properties of starch accumulated in endosperm cell. Nitrogen uptake strongly affects rice growth and starch development. In this study, Nangeng 9108 was used to investigated the accumulation of starch in different positions of the endosperm and physical properties of starch under nitrogen treatment of panicle initiation (PI) stage. Compared with the control group (CG), nitrogen treatment group (NTG) featured a higher number of grains per panicle and 1000-grain weight. Nitrogen treatment significantly increased starch accumulation among different regions during endosperm development, which was expressed as central endosperm cells > sub-aleurone cells of abdominal endosperm > sub-aleurone cells of dorsal endosperm. The amyloplast increased by constricting and budding-type division, generated a bead-like structure and derived some vesicles. The particle size of the starch granules obtained from the NTG was smaller and the apparent amylose content was lower than those of the CG, resulting in higher relative crystallinity. Nitrogen treatment promoted double helical components and provided a higher degree of order at short-rang scale for the starch granules. This study indicated that nitrogen significantly affected the accumulation and physicochemical properties of starch in the endosperm.

Effects of high temperature during two growth stages on caryopsis development and physicochemical properties of starch in rice

Global warming may affect the development of rice at different growth stages, thereby decreasing rice yield and deteriorating grain quality. The difference in rice responses to high temperature during primordial differentiation (PD) and pollen filling (PF) stages has been rarely studied. In this paper, two temperature treatments (40 °C and 30 °C) at the two stages (PD and PF) were imposed to four rice groups under the controlled temperature chambers. Compared with rice under normal temperature, high temperature-stressed rice showed accelerated growth rate, smaller caryopsis and decreased yield. Moreover, high temperature affected the starch physicochemical properties, resulting in lower apparent amylose content and higher order degree, gelatinization temperatures, and thereby increased peak, trough and final viscosities in starch. High temperature during PD stage inhibited cell development and starch deposition, thus leading to small starch granule and low retrogradation. However, temperature-stressed rice during PF stage showed increased starch accumulation and larger granule size. Therefore, effects of high temperature during the two stages on caryopsis development and starch properties were partly similar but also notably different. These results enriched and deepened the study of high temperature-stressed rice and served as an important reference for the processing and utilization of rice starch in food industry.

Effects of potassium fertilization on potato starch physicochemical properties

Potato starch serves as an excellent raw material or food additive in the food industry. With the advancement of the potato staple food strategy in China, improving the potato starch yield and quality has attracted more and more attention. Potassium is an essential nutrient for potato due to its direct effects on the yield and quality of potato tubers. Here, the effects of three different potassium levels on potato starch physicochemical properties were evaluated by field experiments. With increasing potassium fertilization rates, the amylose content, phosphorus content and particle size decreased, thereby resulting in low gelatinization temperature, breakdown and setback viscosity, and high swelling power, relative crystallinity and transparency. Our study indicated that enhanced potassium fertilization improved the resistance to heat and shear stress and decreased the retrogradation of starch, and the 270 kg/ha potassium fertilization rate could obtain the highest tuber and starch production with desirable starch physicochemical properties. The integrated results also provide some novel insights into the management of the fertilization conditions to obtain native starches with special properties.

Effects of late-stage nitrogen fertilizer application on the starch structure and cooking quality of rice

BACKGROUND

With the rapid development of modern agriculture, high-quality rice production and consumption has become the current urgent demand for the development of rice production. In this paper, the effects of late-stage nitrogen fertilizer application on rice quality were studied under the same genetic background. Wx near-isogenic lines were used as test materials to study the starch composition, amylopectin structure and cooking quality of rice.

RESULTS

Results showed that rice amylose content and gel consistency significantly differed when different Wx genes were tranformed into waxy rice. The law of apparent amylose content in rice is Wx^a > Wxⁱⁿ > Wx^b > wx at the same nitrogen level, while the trend of gel consistency was opposite to that of apparent amylose content, presenting obvious characteristics of Indica and Japonica varieties. As the amount of fertilizer application increased, apparent amylose content increased, gel consistency decreased, breakdown and peak viscosities dropped and setback viscosity and peak time increased. Moreover, the cooking quality of rice significantly decreased with the use of nitrogen fertilizer, especially under low-level nitrogen fertilizer application. Amylopectin structure varied significantly in different genotypes of the Wx gene, and the degree of branching was as follows: wx > Wx^b > Wxⁱⁿ > Wx^a . This result indicated that the closer to Indica rice, the fewer short chains of amylopectin. Starch crystallinity and swelling potential were negatively correlated with amylose content but significantly positively correlated with amylopectin branching degree, decreasing with the increase of late-stage nitrogen fertilization.

CONCLUSION

Late-stage nitrogen fertilization reduced the cooking quality of rice by increasing amylose content and reducing amylopectin branching degree, which decreased starch crystallinity and aggravated pasting properties. Obviously, controlling late nitrogen application is essential to optimize rice quality. © 2017 Society of Chemical Industry.

Comparative Phosphoproteomic Analysis of the Developing Seeds in Two Indica Rice ( Oryza sativa L.) Cultivars with Different Starch Quality

Protein phosphorylation plays important roles in regulation of various molecular events such as plant growth and seed development. However, its involvement in starch biosynthesis is less understood. Here, a comparative phosphoproteomic analysis of two indica rice cultivars during grain development was performed. A total of 2079 and 2434 phosphopeptides from 1273 and 1442 phosphoproteins were identified, covering 2441 and 2808 phosphosites in indica rice 9311 and Guangluai4 (GLA4), respectively. Comparative analysis identified 303 differentially phosphorylated peptides, and 120 and 258 specifically phosphorylated peptides in 9311 and GLA4, respectively. Phosphopeptides in starch biosynthesis related enzymes such as AGPase, SSIIa, SSIIIa, BEI, BEIIb, PUL, and Pho1were identified. GLA4 and 9311 had different amylose content, pasting viscosities, and gelatinization temperature, suggesting subtle difference in starch biosynthesis and regulation between GLA4 and 9311. Our study will give added impetus to further understanding the regulatory mechanism of starch biosynthesis at the phosphorylation level.