Development of Quantum Dots-Labeled Antibody Fluorescence Immunoassays for the Detection of Morphine

Quantitative fluorescent detection of tetracycline in animal-derived foods using quantum dots

Tetracycline (Tc) antibiotics, a class of synthetically produced broad-spectrum antimicrobial drugs, have been widely used in animal husbandry, leading to their widespread presence in animal-derived foods. However, misuse, overuse, and non-compliance with withdrawal periods in animal farming have resulted in excessive Tc residues in these foods, which can cause various adverse reactions in humans, induce bacterial resistance, and pose a significant threat to public health. Consequently, the detection of Tc antibiotic residues in animal-derived food has become a critical issue. This study aims to establish a novel method for quantifying Tc residues in animal-derived food using quantum dots (QDs) fluorescence immunoassay (FLISA). The developed method was optimized to achieve a detection limit of 0.69 ng/mL and a quantitative detection range of 1.30 ~ 59.22 ng/mL. The applicability of the method was demonstrated by successfully determining Tc residues in pork, chicken, fish, milk, eggs, and honey samples spiked with Tc standard solutions, yielding recoveries ranging from 94.01% to 110.19% and relative standard deviations between 1.10% and 11.39%. The significance of this study lies in its potential to provide a rapid and reliable approach for monitoring Tc residues in animal-derived food products, thereby contributing to the enhancement of food safety monitoring practices. KEY POINTS: • Screen out tetracycline-specific blocking monoclonal antibodies • The quantitative detection has high specificity and sensitivity • This method can be a useful tool for laboratories or testing facilities.

Electrochemical measurement of morphine using a sensor fabricated from the CuS/g-C3N5/Ag nanocomposite

Morphine, as one of the most important narcotic drugs, significantly affects the nervous system and increases euphoria, which raises the likelihood of its misuse. Therefore, its measurement is of great importance. In this work, a new electrochemical sensor based on a nanocomposite of CuS/g-C3N5/AgNPs was developed for modifying Screen printed carbon electrodes (SPCEs) and used for the measurement of morphine through cyclic voltammetry and differential pulse voltammetry. Various analytical methods initially characterized the nanocomposite. The prepared sensor, which also has an extensive surface area, achieved a detection limit of 0.01 µM for morphine in a concentration range of 0.05-100 µM at pH 7. Besides its excellent capability in measuring morphine in real samples, the sensor exhibits good stability, reproducibility, and repeatability. The presence of CuS, due to its excellent high surface area alongside silver nanoparticles, leads to an increase in the conductivity of the g-C3N5 modified electrode, resulting in an increased oxidative current of morphine at the surface of the prepared sensor. Therefore, measuring low concentrations of morphine with this sensor was made possible. Additionally, measuring morphine without interference from various species is a strong point of the electrochemical sensor for morphine detection, and combined with the simplicity and ease of the method, it allows for morphine measurements to be conducted in the shortest possible time.

Quantification of morphine in exhaled breath condensate using a double network polymeric hybrid hydrogel functionalized with AuNPs

BACKGROUND

Morphine serves as a foundation for creating other opioid derivatives, such as hydro/oxymorphine and heroin, which possess enhanced pain-relieving properties but are also prone to addiction and abuse. In cases of morphine overdose, it not only affects multiple immune functions but can also cause severe health complications. Given these concerns and the widespread use of morphine, it is crucial to develop efficient, uncomplicated, and precise methods for accurately detecting morphine in various biological and pharmaceutical samples.

RESULTS

In this investigation, a novel gold nanoparticle (AuNPs)-based double network hydrogel (DNH) nanoprobe has been fabricated for sensitive quantification of morphine in exhaled breath condensate samples. For that, gelatin/agarose DNH was fabricated through a one-step heating-cooling method in the presence of AuNPs, providing not only chemical stability but also prevent the AuNPs aggregation during synthesis process. In this method, the absorbance intensity of the nanoprobe gradually decreased with increasing morphine concentration due to the interaction morphine with AuNPs surface plasmon. The aggregation of AuNPs by addition of morphine was verified by UV-Vis spectrophotometry. The sensor displayed high sensitivity with detection limit of 0.006 µg.mL-1 in the linear range from 0.01 to 1.0 µg.mL-1. A reliable performance was attained for the spectrophotometric method for determination of morphine in the real samples.

A near-infrared plasmonic biosensor for detection of morphine and codeine in biological samples based on the end-to-end assembly of modified gold nanorods

The analytical determination of opiates in biological samples is a critical mission and remains a challenge for almost all judicial and clinical drug testing panels due to their high abuse potential. Based on the high sensitivity of the longitudinal surface plasmon resonance (LSPR) peak of gold nanorods (AuNRs), we successfully developed a novel and simple refractive index sensing platform for detection of morphine (MOR) and codeine (COD) by means of 2-amino-5-mercapto-1,3,4-thiadiazole functionalized gold nanorods (AMTD-AuNRs) in aqueous solution, which is, to the best of our knowledge, the first report on the assay of MOR and COD using AuNRs. AMTD molecules strongly anchor onto the tips of AuNRs via the mercapto group and subsequent hydrogen-bonding interactions between AMTD and the analytes induced end-to-end chain assembly of AuNRs and a consequent decrease of the LSPR absorption band at 850 nm along with a bathochromic shift and emergence of a new hybridized plasmon mode at 1050 nm which was characterized using a Vis-NIR spectrophotometer. After systematic optimization, the absorbance ratio (A1050/A850) was proportional to the concentration of MOR in the ranges of 0.08-5 μM and 0.2-8 μM for COD without any significant effect from possible interferents. Furthermore, detection limits of 40 and 62 nM were achieved for MOR and COD, respectively, which are much lower than the cut-off level of 2000 ng mL-1 for opiates in urine samples set by the Substance and Abuse Mental Health Services Administration (SAMHSA). Eventually, as proof-of-applicability, human urine and blood serum samples spiked with MOR and COD were analyzed and excellent recoveries ranging from 94.4 to 108.9% were obtained, demonstrating the successful applicability of the designed refractive index probe in real biological specimens.

Machine learning-enhanced drug testing for simultaneous morphine and methadone detection in urinary biofluids

The simultaneous identification of drugs has considerable difficulties due to the intricate interplay of analytes and the interference present in biological matrices. In this study, we introduce an innovative electrochemical sensor that overcomes these hurdles, enabling the precise and simultaneous determination of morphine (MOR), methadone (MET), and uric acid (UA) in urine samples. The sensor harnesses the strategically adapted carbon nanotubes (CNT) modified with graphitic carbon nitride (g-C3N4) nanosheets to ensure exceptional precision and sensitivity for the targeted analytes. Through systematic optimization of pivotal parameters, we attained accurate and quantitative measurements of the analytes within intricate matrices employing the fast Fourier transform (FFT) voltammetry technique. The sensor's performance was validated using 17 training and 12 test solutions, employing the widely acclaimed machine learning method, partial least squares (PLS), for predictive modeling. The root mean square error of cross-validation (RMSECV) values for morphine, methadone, and uric acid were significantly low, measuring 0.1827 µM, 0.1951 µM, and 0.1584 µM, respectively, with corresponding root mean square error of prediction (RMSEP) values of 0.1925 µM, 0.2035 µM, and 0.1659 µM. These results showcased the robust resiliency and reliability of our predictive model. Our sensor's efficacy in real urine samples was demonstrated by the narrow range of relative standard deviation (RSD) values, ranging from 3.71 to 5.26%, and recovery percentages from 96 to 106%. This performance underscores the potential of the sensor for practical and clinical applications, offering precise measurements even in complex and variable biological matrices. The successful integration of g-C3N4-CNT nanocomposites and the robust PLS method has driven the evolution of sophisticated electrochemical sensors, initiating a transformative era in drug analysis.

Eu3+-Doped Anionic Zinc-Based Organic Framework Ratio Fluorescence Sensing Platform: Supersensitive Visual Identification of Prescription Drugs

Advanced techniques for both environmental and biological prescription drug monitoring are of ongoing interest. In this work, a fluorescent sensor based on an Eu3+-doped anionic zinc-based metal-organic framework (Eu3+@Zn-MOF) was constructed for rapid visual analysis of the prescription drug molecule demecycline (DEM), achieving both high sensitivity and selectivity. The ligand 2-amino-[1,1'-biphenyl]-4,4'-dicarboxylic acid (bpdc-NH2) not only provides stable cyan fluorescence (467 nm) for the framework through intramolecular charge transfer of bpdc-NH2 infinitesimal disturbanced by Zn2+ but also chelates Eu3+, resulting in red (617 nm) fluorescence. Through the synergy of photoinduced electron transfer and the antenna effect, a bidirectional response to DEM is achieved, enabling concentration quantification. The Eu3+@Zn-MOF platform exhibits a wide linear range (0.25-2.5 μM) to DEM and a detection limit (LOD) of 10.9 nM. Further, we integrated the DEM sensing platform into a paper-based system and utilized a smartphone for the visual detection of DEM in water samples and milk products, demonstrating the potential for large-scale, low-cost utilization of the technology.

Recent Breakthroughs in Using Quantum Dots for Cancer Imaging and Drug Delivery Purposes

Cancer is one of the leading causes of death worldwide. Because each person's cancer may be unique, diagnosing and treating cancer is challenging. Advances in nanomedicine have made it possible to detect tumors and quickly investigate tumor cells at a cellular level in contrast to prior diagnostic techniques. Quantum dots (QDs) are functional nanoparticles reported to be useful for diagnosis. QDs are semiconducting tiny nanocrystals, 2-10 nm in diameter, with exceptional and useful optoelectronic properties that can be tailored to sensitively report on their environment. This review highlights these exceptional semiconducting QDs and their properties and synthesis methods when used in cancer diagnostics. The conjugation of reporting or binding molecules to the QD surface is discussed. This review summarizes the most recent advances in using QDs for in vitro imaging, in vivo imaging, and targeted drug delivery platforms in cancer applications.

Coupling Capillary-Driven Microfluidics with Lateral Flow Immunoassay for Signal Enhancement

Microfluidics has emerged as a versatile technology that is applied to enhance the performance of analytical techniques, among others. Pursuing this, we present a capillary-driven microfluidic device that improves the sensitivity of lateral flow immunoassay rapid tests thanks to offering an automated washing step. A novel multilevel microfluidic chip was 3D-printed with a photocurable black resin, sealed by an optically clear pressure-sensitive adhesive, and linked to the lateral flow strip. To depict the efficacy of microfluidics and the washing step, cortisol was measured quantitatively within the proposed device. Measuring cortisol levels is a way to capture physiological stress responses. Among biofluids, saliva is less infectious and easier to sample than others. However, higher sensitivity is demanded because the salivary cortisol concentrations are much lower than in blood. We carried out a competitive lateral flow immunoassay protocol with the difference that the microfluidic device applies an automated washing step after the sample is drained downstream. It washes the trapped quantum-dot-labeled antibodies out from nitrocellulose, diminishing background noise as these are bonded to cortisols and not to the immobilized receptors. Fluorescence spectroscopy, as a high-precision analysis, was successfully applied to determine clinically relevant salivary cortisol concentrations within a buffer quantitatively. The microfluidic design relied on a 3D valve that avoids reagent cross-contamination. This cross-contamination could make the washing buffer impure and undesirably dilute the sample. The proposed device is cost-effective, self-powered, robust, and ideal for non-expert users.

Site-specific labeling of antibodies with quantum dots could promote to retain the antigen binding capacity of antibodies

A major concern with antibody labeling is the decreased antigen affinity binding capacity of antibodies, owing mainly to the randomly oriented binding of the marker. Herein, a universal approach for site-specific photocrosslinking of quantum dots (QDs) to the Fc-terminal of antibodies was investigated utilizing antibody Fc-terminal affinity proteins. Results showed that the QDs only bound to the heavy chain of the antibody. Further comparative tests confirmed that the site-specific directed labeling approach maximizes the retention of the antigen-binding capacity of the natural antibody. Compared with the commonly employed random orientation labeling approach, the directional labeling approach allows the labeled antibody showed 6 times greater binding affinity to antigen. QDs-labeled monoclonal antibodies were applied to fluorescent immunochromatographic test strips for the detection of shrimp tropomyosin (TM). The established procedure has a detection limit of 0.054 μg/mL. Thus, the site-specific labeling approach significantly improves the antigen binding capacity of the labeled antibody.

Europium Nanoparticles-Based Fluorescence Immunochromatographic Detection of Three Abused Drugs in Hair

Drug abuse is becoming increasingly dangerous nowadays. Morphine (MOP), methamphetamine (MET) and ketamine (KET) are the most commonly abused drugs. The abuse of these drugs without supervision can cause serious harm to the human body and also endanger public safety. Developing a rapid and accurate method to screen drug suspects and thus control these drugs is essential to public safety. This paper presents a method for the simultaneous quantitative detection of these three drugs in hair by a europium nanoparticles-based fluorescence immunochromatographic assay (EuNPs-FIA). In our study, the test area of the nitrocellulose membrane was composed of three equally spaced detection lines and a quality control line. The test strip realized the quantitative analysis of the samples by detecting the fluorescence brightness of the europium nanoparticles captured on the test line within 15 min. For the triple test strip, the limits of detection of MOP, KET and MET were 0.219, 0.079 and 0.329 ng/mL, respectively. At the same time, it also showed strong specificity. The strip was stable and could be stored at room temperature for up to one year, and the average recovery rate was 85.98-115.92%. In addition, the EuNPs-FIA was validated by high-performance liquid chromatography (HPLC) analysis, and a satisfactory consistency was obtained. Compared to the current immunochromatographic methods used for detecting abused drugs in hair, this method not only increased the number of detection targets, but also ensured sensitivity, improving detection efficiency to a certain extent. The approach can also be used as an alternative to chromatography. It provides a rapid and accurate screening method for the detection of abused drugs in hair and has great application prospects in regard to public safety.

Simultaneous labeling and multicolor fluorescence imaging of multiple immune cells on liver frozen section by polychromatic quantum dots below freezing points

A method for simultaneous labeling and multicolor fluorescence imaging of different hepatic immune cells below freezing point is established based on quantum dots. In the experiment, carbon quantum dots with emission wavelength of 435 nm, CdTe@CdS quantum dots at 542 nm and CdSe@ZnS quantum dots at 604 nm are synthesized respectively, it is found that when the mass fractions of KCl (as antifreeze) are 12 %, 14 %, and 12 %, respectively, the three quantum dot dispersion systems remain liquid state at -20 °C. After they are conjugated with the corresponding secondary antibodies, agarose gel electrophoresis, circular dichroism and capillary electrophoresis confirm the effectiveness of conjugation. By indirect immunofluorescence method, the above three quantum dot fluorescent probes are used to simultaneously and specifically target a variety of liver immune cells, and the multi-color simultaneous imaging of different liver immune cells is realized under the same excitation wavelength, it is found that hepatic macrophages are arranged radially in the liver, hepatic stellate cells present punctate distribution, and hepatic sinusoidal endothelial cells present circular distribution, which is consistent with the results of H&E staining and ultrathin section TEM. This study provides an important technical means for elucidating the structure and function of the liver.

Mechanical Force-Induced Color-Variable Luminescence of Carbon Dots in Boric Acid Matrix

Mechano-luminescent materials that exhibit distinct luminescence responses to force stimuli are urgently anticipated in view of application needs in the fields of sensing, anti-counterfeiting, optoelectronic devices, etc. However, most of the reported materials normally exhibit force-induced changes in luminescent intensity, whereas materials that possess force-induced color-variable luminescence remain rarely reported. Herein, for the first time, a novel mechanical force-induced color-variable luminescence material from carbon dots (CDs) in boric acid (CD@BA) is reported. At low CDs concentration, the luminescence of CD@BA exhibits a grinding-induced color variable from white to blue. This grinding-induced color variable can be switched to yellow-to-white changing by increasing the CDs concentration in BA. The grinding-induced color-variable luminescence originates from dynamic variation in emission ratio of fluorescence and room temperature phosphorescence, due to the influence of oxygen and water vapor in the air. At high CDs concentration, short-wavelength fluorescence undergoes more severe reabsorption compared to room temperature phosphorescence, leading to grinding-induced color-variable switching from white-to-blue to yellow-to-white. Based on the unique properties of CD@BA powder, the applications of recognizing and visualizing fingerprints on the surfaces of various of materials are demonstrated.

Quantum Dot-Antibody Conjugates for Immunofluorescence Studies of Biomolecules and Subcellular Structures

Quantum dots, or nanoscale semiconductors, are one of the most important materials for various research and development purposes. Due to their advantageous photoluminescence and electronic properties, namely, their unique photostability, high brightness, narrow emission spectra from visible to near-infrared wavelengths, convey them significant advantages over widely used fluorochromes, including organic dyes, fluorescent probes. Quantum dots are a unique instrument for a wide range of immunoassays with antibodies. The paper provides an overview of the developed and already applied methods of quantum dot surface modification, quantum dots conjugation to different antibodies (non-covalent, direct covalent linkage or with the use of special adapter molecules), as well as practical examples of recent quantum dot-antibody applications in the immunofluorescence microscopy for cell and cell structure imaging, fluorescent assays for biomolecules detection and in diagnostics of various diseases. The review presents advantages of quantum dot-antibody conjugation technology over the existing methods of immunofluorescence studies and a forward look into its potential prospects in biological and biomedical research.

Application of sulfur and nitrogen doped carbon quantum dots as sensitive fluorescent nanosensors for the determination of saxagliptin and gliclazide

In this study, highly fluorescent sulfur and nitrogen doped carbon quantum dots (S,N-CQDs) were used as fluorescent nanosensors for direct spectrofluorimetric estimation of each of gliclazide (GLZ) and saxagliptin (SXG) without any pre-derivatization steps for the first time. S,N-CQDs were synthesized employing a simple hydrothermal technique using citric acid and thiosemicarbazide. The produced S,N-CQDs were characterized using different techniques including fluorescence emission spectroscopy, UV spectrophotometry, high-resolution transmission electron microscopy and FT-IR spectroscopy. Following excitation at 360 nm, S,N-CQDs exhibited a strong emission peak at 430 nm. The native fluorescence of S,N-CQDs was quantitatively enhanced by addition of increased concentrations of the studied drugs. The fluorescence enhancement of S,N-CQDs and the concentrations of the studied drugs revealed a wide linear relationship in the range of 30.0-500.0 µM and 75.0-600.0 µM with limits of detection of 5.0 and 10.15 µM for GLZ and SXG, respectively. The proposed method was efficiently used for determination of cited drugs in their commercial tablets with % recoveries ranging from 98.6% to 101.2% and low % relative standard deviation values (less than 2%). The mechanism of interaction between S,N-CQDs and the two drugs was studied. Validation of the proposed method was carried out in accordance with International Conference on Harmonization (ICH) guidelines.

Quantum dot-based fluorescence immunosorbent assay for the rapid detection of bacitracin zinc in feed samples

Bacitracin zinc (BAC), a polypeptide antibiotic, is utilized as a feed additive due to its ability to promote growth in animals. However, the abuse of BAC can lead to a great threat to food safety. Therefore, there is an urgent need to develop a rapid and sensitive detection method. In this study, a monoclonal antibody (mAb) against BAC with excellent sensitivity and specificity was obtained. For the first time, quantum dots (QDs) were conjugated with the prepared mAb against BAC and rabbit anti-mouse antibody to fabricate a direct and an indirect competitive fluorescence-linked immunosorbent assay (dc-FLISA and ic-FLISA) to detect BAC. The IC₅₀ of dc-FLISA and ic-FLISA were 0.28 ng/ml and 0.17 ng/ml, respectively. The limits of detection were 0.0016 ng/ml and 0.001 ng/ml, respectively, and the detection ranges were 0.0016-46.50 ng/ml and 0.001-35.65 ng/ml, respectively. In addition, the recovery rate of the two methods ranged from 93.5% to 112.0%, and the coefficient of variation (CV) was less than 10%. Therefore, the methods developed in this work have the merits of low cost, simple operation, and high sensitivity, which provide an effective analytical tool for BAC residue detection in feed samples.

Simultaneous electrochemical determination of morphine and methadone by using CMK-5 mesoporous carbon and multivariate calibration

For the first time, a sensitive electrochemical sensor using a glassy carbon electrode modified with CMK-5 Ordered mesoporous carbon was fabricated for simultaneous analysis of morphine and methadone. Modern electrochemical FFT-SWV techniques and partial least-squares as a multivariable analysis were used in this method. CMK-5 nanostructures were characterized by field emission scanning electron microscopy, transmission electron microscopy, X-ray diffraction analysis, and Raman spectroscopy. Variables such as accumulation time and pH for the proposed sensor were optimized before quantitative analysis. To train the proposed sensor, standard mixtures of morphine (MOR), and methadone (MET) were prepared in the established linear ranges of the analyzes. The results obtained from training samples were used for PLS modeling. The efficiency of the model was determined using test and real matrix samples. The root mean square error of prediction and the squared correlation coefficients (R²_p) for MET and MOR were estimated to be 0.00772 and 0.00892 and 0.948 to 0.990, respectively. The recoveries in urine samples were reported to be 97.0 and 105.6% for both MOR and MET, respectively.

A novel self-aggregated gold nanoparticles based on sensitive immunochromatographic assays for highly detection of opium poppy in herbal teas

Opium poppy abused in food has aroused public concerns due to its serious side effects. Effective monitoring is essential to fight the abuse crisis. Herein, we synthesized an easily prepared, affordable, accessible highly aggregated gold nanoparticles (AGNPs) performing in lateral flow immunoassay (LFIA) for detection opium poppy in herbal teas. Simultaneously, a LFIA based ontime-resolved fluorescent microspheres (TRFMs) was developed as contrastive method. In this study, morphine (MOR), codeine (COD) and thebaine (THE) were as the specific recognition markers of opium poppy. Results demonstrated the quantitative limits of detection were 0.0049/0.0053/0.084, 0.034/0.037/0.37 ng mL^-1 for AGNPs/TRFMs-LFIA, respectively. The recoveries were 95%-107.5%/91%-106.7% with coefficient of variation was 1.6%-6.6%/1.8%-7.2%, indicating excellent accuracy and precision. Parallel experiments among AGNPs/TRFMs-LFIA and LC-MS/MS analysis showed good correlation. Overall, AGNPs-LFIA executed quantitative analysis within 15 min on the basis of simple treatment while providing a rapid and sensitive analysis strategy for illegal drugs abused.

Fluorescent-based nanosensors for selective detection of a wide range of biological macromolecules: A comprehensive review

Thanks to their unique attributes, such as good sensitivity, selectivity, high surface-to-volume ratio, and versatile optical and electronic properties, fluorescent-based bioprobes have been used to create highly sensitive nanobiosensors to detect various biological and chemical agents. These sensors are superior to other analytical instrumentation techniques like gas chromatography, high-performance liquid chromatography, and capillary electrophoresis for being biodegradable, eco-friendly, and more economical, operational, and cost-effective. Moreover, several reports have also highlighted their application in the early detection of biomarkers associated with drug-induced organ damage such as liver, kidney, or lungs. In the present work, we comprehensively overviewed the electrochemical sensors that employ nanomaterials (nanoparticles/colloids or quantum dots, carbon dots, or nanoscaled metal-organic frameworks, etc.) to detect a variety of biological macromolecules based on fluorescent emission spectra. In addition, the most important mechanisms and methods to sense amino acids, protein, peptides, enzymes, carbohydrates, neurotransmitters, nucleic acids, vitamins, ions, metals, and electrolytes, blood gases, drugs (i.e., anti-inflammatory agents and antibiotics), toxins, alkaloids, antioxidants, cancer biomarkers, urinary metabolites (i.e., urea, uric acid, and creatinine), and pathogenic microorganisms were outlined and compared in terms of their selectivity and sensitivity. Altogether, the small dimensions and capability of these nanosensors for sensitive, label-free, real-time sensing of chemical, biological, and pharmaceutical agents could be used in array-based screening and in-vitro or in-vivo diagnostics. Although fluorescent nanoprobes are widely applied in determining biological macromolecules, unfortunately, they present many challenges and limitations. Efforts must be made to minimize such limitations in utilizing such nanobiosensors with an emphasis on their commercial developments. We believe that the current review can foster the wider incorporation of nanomedicine and will be of particular interest to researchers working on fluorescence technology, material chemistry, coordination polymers, and related research areas.

Naked-Eye Detection of Morphine by Au@Ag Nanoparticles-Based Colorimetric Chemosensors

In this study, we report a novel and facile colorimetric assay based on silver citrate-coated Au@Ag nanoparticles (Au@AgNPs) as a chemosensor for the naked-eye detection of morphine (MOR). The developed optical sensing approach relied on the aggregation of Au@Ag NPs upon exposure to morphine, which led to an evident color variation from light-yellow to brown. Au@Ag NPs have been prepared by two different protocols, using high- and low-power ultrasonic irradiation. The sonochemical method was essential for the sensing properties of the resulting nanoparticles. This facile sensing method has several advantages including excellent stability, selectivity, prompt detection, and cost-effectiveness.

A fluorescent biosensor based on quantum dot-labeled streptavidin and poly-l-lysine for the rapid detection of Salmonella in milk

Salmonella, as a common foodborne pathogen in dairy products, poses a great threat to human health. We studied a new detection method based on quantum dots (QD). A fluorescent biosensor with multiple fluorescent signal amplification based on a streptavidin (SA) biotin system and the polyamino linear polymer poly-l-lysine (PLL) were established to detect Salmonella in milk. First, Salmonella was captured on a black 96-well plate with paired Salmonella mAb to form a double-antibody sandwich. Second, SA was immobilized on biotin-modified mAb by SA-biotin specific bond. Then, the biotin-modified polylysine (BT-PLL) was bound on SA and specifically bonded again through the SA-biotin system. Finally, water-soluble CdSe/ZnS QD-labeled SA was added to a black 96-well plate for covalent coupling with BT-PLL. The fluorescent signal was amplified in a dendritic manner by the layer-by-layer overlap of SA and biotin and the covalent coupling of biotinylated PLL. Under optimal conditions, the detection limit was 4.9 × 10³ cfu/mL in PBS. The detection limit was 10 times better than that of the conventional sandwich ELISA. In addition, the proposed biosensor was well specific and could be used for detecting Salmonella in milk samples.

VEGF Detection via Simplified FLISA Using a 3D Microfluidic Disk Platform

Fluorescence-linked immunosorbent assay (FLISA) is a commonly used, quantitative technique for detecting biochemical changes based on antigen–antibody binding reactions using a well-plate platform. As the manufacturing technology of microfluidic system evolves, FLISA can be implemented onto microfluidic disk platforms which allows the detection of trace biochemical reactions with high resolutions. Herein, we propose a novel microfluidic system comprising a disk with a three-dimensional incubation chamber, which can reduce the amount of the reagents to 1/10 and the required time for the entire process to less than an hour. The incubation process achieves an antigen–antibody binding reaction as well as the binding of fluorogenic substrates to target proteins. The FLISA protocol in the 3D incubation chamber necessitates performing the antibody-conjugated microbeads’ movement during each step in order to ensure sufficient binding reactions. Vascular endothelial growth factor as concentration with ng mL⁻¹ is detected sequentially using a benchtop process employing this 3D microfluidic disk. The 3D microfluidic disk works without requiring manual intervention or additional procedures for liquid control. During the incubation process, microbead movement is controlled by centrifugal force from the rotating disk and the sedimentation by gravitational force at the tilted floor of the chamber.

Novel N,Cl-doped deep eutectic solvents-based carbon dots as a selective fluorescent probe for determination of morphine in food

In the present study, new N,Cl co-doped carbon dots (N,Cl-CDs) based on deep eutectic solvent (DES) were fabricated by a facile hydrothermal process. This fluorescent probe exhibited a good quantum yield of 14% and was applied for the sensitive and selective quantification of morphine in foods. In addition, the influence of solution pH, interaction time, system temperature, interfering substances and analogues on the determination was also investigated. Under the optimized conditions, the luminescence intensity of carbon dots increased linearly with the addition of morphine in the concentration range of (0.15–280.25) μg mL⁻¹ (R² > 0.9969) and the limit of detection (LOD) of 46.5 ng mL⁻¹. Based on these results, it is suggested that N,Cl-CDs is a promising fluorescent probe for sensitive and selective quantification of morphine in foods.

A schematic illustrating the synthesis and morphine detection of N,Cl-CDs.

Tackling the Problem of Sensing Commonly Abused Drugs Through Nanomaterials and (Bio)Recognition Approaches

We summarize herein the literature in the last decade, involving the use of nanomaterials and various (bio)recognition elements, such as antibodies, aptamers and molecularly imprinted polymers, for the development of sensitive and selective (bio)sensors for illicit drugs with a focus on electrochemical transduction systems. The use and abuse of illicit drugs remains an increasing challenge for worldwide authorities and, therefore, it is important to have accurate methods to detect them in seized samples, biological fluids and wastewaters. They are recently classified as the latest group of “emerging pollutants,” as their consumption has increased tremendously in recent years. Nanomaterials, antibodies, aptamers and molecularly imprinted polymers have gained much attention over the last decade in the development of (bio)sensors for a myriad of applications. The applicability of these (nano)materials, functionalized or not, has significantly increased, and are therefore highly suitable for use in the detection of drugs. Lately, such functionalized nanoscale materials have assisted in the detection of illicit drugs fingerprints, providing large surface area, functional groups and unique properties that facilitate sensitive and selective sensing. The review discusses the types of commonly abused drugs and their toxicological implications, classification of functionalized nanomaterials (graphene, carbon nanotubes), their fabrication, and their application on real samples in different fields of forensic science. Biosensors for drugs of abuse from the last decade's literature are then exemplified. It also offers insights into the prospects and challenges of bringing the functionalized nanobased technology to the end user in the laboratories or in-field.

Mixed Mercaptocarboxylic Acid Shells Provide Stable Dispersions of InPZnS/ZnSe/ZnS Multishell Quantum Dots in Aqueous Media

Highly luminescent indium phosphide zinc sulfide (InPZnS) quantum dots (QDs), with zinc selenide/zinc sulfide (ZnSe/ZnS) shells, were synthesized. The QDs were modified via a post-synthetic ligand exchange reaction with 3-mercaptopropionic acid (MPA) and 11-mercaptoundecanoic acid (MUA) in different MPA:MUA ratios, making this study the first investigation into the effects of mixed ligand shells on InPZnS QDs. Moreover, this article also describes an optimized method for the correlation of the QD size vs. optical absorption of the QDs. Upon ligand exchange, the QDs can be dispersed in water. Longer ligands (MUA) provide more stable dispersions than short-chain ligands. Thicker ZnSe/ZnS shells provide a better photoluminescence quantum yield (PLQY) and higher emission stability upon ligand exchange. Both the ligand exchange and the optical properties are highly reproducible between different QD batches. Before dialysis, QDs with a ZnS shell thickness of ~4.9 monolayers (ML), stabilized with a mixed MPA:MUA (mixing ratio of 1:10), showed the highest PLQY, at ~45%. After dialysis, QDs with a ZnS shell thickness of ~4.9 ML, stabilized with a mixed MPA:MUA and a ratio of 1:10 and 1:100, showed the highest PLQYs, of ~41%. The dispersions were stable up to 44 days at ambient conditions and in the dark. After 44 days, QDs with a ZnS shell thickness of ~4.9 ML, stabilized with only MUA, showed the highest PLQY, of ~34%.

Quantum dots as nanosensors for detection of toxics: a literature review

Great advances have been made in sensor-based methods for chemical analysis owing to their high sensitivity, selectivity, less testing time, and minimal usage of chemical reagents. Quantum Dots (QDs) having excellent optical properties have been thoroughly explored for variety of scientific applications wherein light plays an important role. In recent years, there have been an increasing number of publications on the applications of QDs as photoluminescent nanosensors for the detection of chemicals and biomolecules. However, there has been hardly any publication describing the use of QDs in the detection of various toxic chemicals at one place. Hence, a literature survey has been made on the applications of QDs as chemosensors for the detection of gaseous, anionic, phenolic, metallic, drug-overdose, and pesticide poison so as to open a new perspective towards the role of sensors in analytical toxicology. In this review, the QD-based analysis of biospecimens for poison detection in clinical and forensic toxicology laboratories is highlighted.

Surface-Confined Building of Au@Pt-Centered and Multi-G-Quadruplex/Hemin Wire-Surrounded Electroactive Super-nanostructures for Ultrasensitive Monitoring of Morphine

Overuse and abuse of morphine (MOP), one of the main components of pericarpium papaveris, have attracted increasing attention in the medical field owing to its pharmacological and toxicological activity. Herein, we proposed a new electrochemical nano-biosensor for MOP detection based on surface-confined building of Au@Pt-centered and multi-G-quadruplex/hemin wire-surrounded electroactive super-nanostructures. The center Au@Pt was flower-shaped and irregularly protruded, allowing substantial loading of multiple G-quadruplex wire/hemin complexes on its surface to accomplish the assembly of electroactive super-nanostructures. Interestingly, as the super-nanostructures were closely confined on the electrode surface, a significantly amplified electrochemical signal was thus obtained in the absence of MOP. In contrast, the introduction of target MOP can induce an intense competitive effect and strongly destroy the assembly process, resulting in the reduction of the electrochemical response that is correlated with the logarithmic concentration of MOP. Under optimal conditions, the electrochemical nano-biosensor is capable of highly sensitive detection of MOP in a dynamic concentration range from 1 ppt to 500 ppb. The limit of detection is achieved as low as 0.69 ppt, and the practical application was confirmed by examining MOP from chafing dish condiments. We expect the electrochemical platform utilizing this unique nanoarchitecture to provide rational guidelines to design high-performance analytical tools.

New insights into the release mechanism of Cd2+ from CdTe quantum dots within single cells in situ

Cadmium-quantum dots (Cd-QDs) possess unique properties as optoelectronic devices for sensitive detection in food and biomedicine fields. However, the toxic effects of Cd-QDs to single cells is still controversial, due to the release mechanism of QDs to Cd²⁺in situ and the cytotoxic effects of QDs and Cd²⁺ respectively are still unclear. In this paper, the release rule of Cd²⁺ from CdTe QDs within single cells was investigated in situ by using flow cytometry method and the dose-response relationships were explored. Besides, an all-inclusive microscopy system was optimized for live cell imaging to observe the real-time entry process of CdTe QDs into cells. We found that intracellular CdTe QDs and Cd²⁺ contents were increased based on the dosage and exposing time. A dissociated saturation of Cd²⁺ from CdTe QDs was exist within cells. CdTe QDs induced more serious cytotoxicity on kidney cells than hepatocytes. The toxicity of oxidative stress, cell apoptosis effects induced by CdTe QDs and Cd²⁺ are also in consistent with this result. This research develops analytical method to quantify the uptake and release of Cd-QDs to primary cells in situ and can provide technical support in studying the cytotoxicity portion contributed by nanoparticles (NPs) and metal ions.

Interpol review of controlled substances 2016-2019

This review paper covers the forensic-relevant literature in controlled substances from 2016 to 2019 as a part of the 19th Interpol International Forensic Science Managers Symposium. The review papers are also available at the Interpol website at: https://www.interpol.int/content/download/14458/file/Interpol%20Review%20Papers%202019.pdf.

Positive Urine Morphine Test in a Chinese Patient Receiving Methadone Maintenance Treatment After Eating Hot Pot: A Case Report

Poppy shells contain opioids. It is a popular, but illegal spice in China. If these shells are added to food, urine morphine test of the patients involved in methadone maintenance treatment (MMT) can turn out positive. A 44-year-old male patient, who had been receiving MMT for 12 years with an extremely good treatment adherence, presented with positive urine morphine test in routine clinical compliance monitoring. However, the patient denied the use of any opioids recently. Coincidently, all of his four family members (none with a history of heroin abuse) showed positive results in urine morphine test. Considering that all these people ate a hot pot together a day before the test added to the speculation that the positive result could be due to the addition of poppy shell to the hot pot. Based on our results, we propose that this unusual phenomenon is worthy of clinical attention when managing patients at MMT clinics.

Rapid and sensitive detection of drugs of abuse in sweat by multiplexed capillary based immuno-biosensors

Drugs of abuse detection by multiplexed capillary based immuno-biosensors with competitive ELISA.

Ratiometric fluorescent sensing system for drug residue analysis: Highly sensitive immunosensor using dual-emission quantum dots hybrid and compact smartphone based-device

Immunoassays such as the enzyme-linked immunosorbent assay (ELISA) are utilized extensively for detecting protein biomarkers and small molecules in healthcare, environmental monitoring, and food analysis. Unfortunately, the current strategies for immunoassays often require sophisticated apparatus such as a microplate reader, which might not be available in resource-limited areas. To mitigate this problem, we designed a compact smartphone based-device and a multicolor response immunosensor. First, we designed a compact and cost-effective 3D-printed attachment, where a light-emitting diode was used as a light excitation source and a smartphone captured the fluorescent emission signals. Second, by combining quantum dots hybrid and chemical redox reaction, multiple color responses were displayed in the presence of the analyte at different concentrations. Third, solutions with distinct tonality could be readily distinguished by the naked eye and they were suitable for quantitative analysis using the hue-saturation-lightness color space based on a smartphone application. The versatility of the proposed sensing system was demonstrated by implementing an indirect competitive ELISA for analyzing trace drug residues in foodstuffs. The multicolor response of this sensing strategy allows us to visually quantify drug residues in foodstuffs. Moreover, the smartphone-based immunosensor can assess the exact concentration of the analyte by using a self-designed mobile application. The proposed assay provides a highly sensitive performance that the limit of detection was 0.37 ng/mL by visual detection and 0.057 ng/mL using the compact device. Due to its advantages in terms of portability, straightforward visual detection, high sensitivity, and cost effectiveness, the proposed immunosensor has great potential for applications in areas without access to laboratories or expensive infrastructure.

Disposable electrochemical immunosensor array for the multiplexed detection of the drug metabolites morphine, tetrahydrocannabinol and benzoylecgonine

Heroin, marijuana and cocaine are widely abused drugs. Their use can be readily detected by analyzing urine for the metabolites morphine (MOR), tetrahydrocannabinol (THC) or benzoylecgonine (BZC). A multiplex immunosensor is described here for detection of MOR, THC and BZC using screen printed carbon array electrodes modified with gold nanoparticles. Antibodies against MOR, THC and BZC were immobilized on eight electrodes in a sensor array simultaneously, and a competitive assay was used for the detection. The free analytes in the sample compete with bovine serum albumin-conjugated analytes for the immobilized antibodies on the sensor surface. The array is capable of detecting the three drugs simultaneously within 20-40 min. The method has a high sensitivity, with detection limits as low as 1.2, 7.0, and 8.0 pg.mL^-1 for MOR, THC and BZC, respectively. Cross reactivity testing was preformed to monitor any nonspecific binding. The results revealed good selectivity. Urine samples were spiked with the 3 drugs and tested with the multiplexed immunosensor. Recovery percentages ranged between 88 to 115%. Graphical abstract Schematic presentation of the multiplexed immunosensor for drugs of abuse,viz. tetrahydrocannabinol (THC), morphine (MOR), and benzoylecgonine (BZC)) by using an array of modified electrodes.

Gold-platinum nanoflowers as a label and as an enzyme mimic for use in highly sensitive lateral flow immunoassays: application to detection of rabbit IgG

The authors describe the preparation of gold-platinum nanoflower (AuPt NFs) and show that they can be simultaneously used as a label and as an enzyme mimic in lateral flow immunoassays (LFIs). The AuPt NFs were prepared by growing Pt nanowires on the surface of gold nanoparticle. The assay involves the capture of target proteins (here: rabbit IgG as a model analyte) by the immobilized capture antibody, and by using AuPt NF-labeled secondary antibody. The AuPt NFs are thus captured by the test zone and produce a characteristic black band for visual detection of the antigen (IgG). The coloration of the test line can be further enhanced by addition of the chromogenic substrate 3-amino-9-ethyl-carbazole which is catalytically oxidized by the captured Pt nanowires on the AuPt NF and produce a red coloration. Quantitative results were obtained by reading the test line intensities with a portable strip reader. The LFI has a 5 pg mL-1 detection limit for IgG under optimized experimental conditions. This is 100 times lower than that of the conventional AuNP-based LFI. Conceivably, this assay has a wide scope in that it may be applied to numerous other targets for which appropriate antibodies are available. Graphical abstract Gold-platinum nanoflowers are used as a label and as an enzyme mimic in a highly sensitive lateral flow immunoassay for IgG. The detection limit of gold-platinum nanoflower-based lateral flow assay is 100 times lower than that of the conventional gold nanopaticle-based lateral flow assay.

Preparation of a Near-Infrared Fluorescent Probe Based on IR-780 for Highly Selective and Sensitive Detection of Bisulfite-Sulfite in Food, Living Cells, and Mice

A near-infrared fluorescent probe was designed and synthesized for the detection of bisulfite-sulfite in food, living HeLa cells, and mice. The probe is a stable hemicyanine skeleton based on IR-780, which produces a distinct color and fluorescence change before and after reaction with bisulfite and shows excellent analytical performance, such as high sensitivity with a detection limit of 0.37 μM and high selectivity toward bisulfite over other substances. More importantly, the probe determined bisulfite in real food samples (crystal sugar and red wine) with superior recoveries (96.7-106.1%) and has been successfully used to monitor bisulfite in living HeLa cells. Notably, the probe was applied to image bisulfite in BALB/c mice in vivo for the first time. Owing to its biocompatibility, this probe provides a desired method to study the metabolism of bisulfite in cells and shows substantial potential usage in other biosystems and in vivo imaging studies.

A magnetic nanoparticle based immunoassay for alternariol monomethyl ether using hydrogen peroxide-mediated fluorescence quenching of CdTe quantum dots

The authors describe a fluorometric immunoassay for alternariol monomethyl ether (AME). It is making use of magnetic nanoparticles and quenching of the fluorescence of mercaptopropionic acid-capped CdTe quantum dots (MPA-CdTe QDs) by H₂O₂. Catalase (CAT) was labeled with AME as a competitive antigen to competitively bind to magnetic nanoparticles carrying monoclonal antibodies (mAbs) with free AME in samples. The effects of the concentration and pH value of buffer, the concentrations of H₂O₂ and CAT-AME, and the incubation time of H₂O₂ and MPA-CdTe QDs were optimized. Under optimal conditions and in combination with magnetic separation, the quenching of the fluorescence of the MPA-CdTe QDs (excitation at 310 nm, emission at 599 nm) can be used to quantify AME with a detection limit of 0.25 pg·mL^-1 and the linear range from 0.25 to 7.5 pg·mL^-1. The immunoassay also has a lower cross-reactivity to AME analogues. It was evaluated by analyzing fruit samples spiked with AME. The recoveries from spiked fruits ranged from 87.2% to 92.0%. Graphical abstract Schematic presentation of a fluorometric immunoassay for alternariol monomethyl ether (AME) using magnetic nanoparticles (MNPs) for the rapid separation and purification. The method is based on quenching of the fluorescence of mercaptopropionic acid-capped CdTe quantum dots (MPA-CdTe QDs) by H₂O₂ for the fluorescence signal output, and on the use of catalase (CAT) with its high catalytic activity.