Molecularly Imprinted Polymer as an Antibody Substitution in Pseudo-immunoassays for Chemical Contaminants in Food and Environmental Samples

Molecularly imprinted polymer-based SERS sensing of transferrin in human serum

Specific detection of glycoproteins such as transferrin (TRF) related to neurological diseases, hepatoma and other diseases always plays an important role in the field of disease diagnosis. We designed an antibody-free immunoassay sensing method based on molecularly imprinted polymers (MIPs) formed by the polymerization of multiple functional monomers for the sensitive and selective detection of TRF in human serum. In the sandwich surface-enhanced Raman spectroscopy (SERS) sensor, the TRF-oriented magnetic MIP nanoparticles (Fe3O4@SiO2-MIPs) served as capture units to specifically recognize TRF and 4-mercaptophenylboronic acid-functionalized gold nanorods (MPBA-Au NRs) served as SERS probes to label the targets. In order to achieve stronger interaction between the recognition cavities of the prepared MIPs and the different amino acid fragments that make up TRF, Fe3O4@SiO2-MIPs were obtained through polycondensation reactions between more silylating reagents, enhancing the specific recognition of the entire TRF protein and achieving high IF. This sensing method exhibited a good linear response to TRF within the TRF concentration range of 0.01 ng mL-1 to 1 mg mL-1 (R2 = 0.9974), and the LOD was 0.00407 ng mL-1 (S/N = 3). The good stability, reproducibility and specificity of the resulting MIP based SERS sensor were demonstrated. The determination of TRF in human serum confirmed the feasibility of the method in practical applications.

Determination of niclosamide and its two metabolites in fish by molecularly imprinted microsphere-based pseudo-ELISA

Niclosamide is usually used for the treatment of parasite infections in animals. However, niclosamide and one of its metabolites 2-chloro-4-nitroaniline are mutagenic substances, and their residues in animal-derived foods are potential risks to consumers. As far as we know, there has been no immunoassay or pseudo immunoassay reported to determine niclosamide and its metabolites in animal-derived foods. In this study, a molecularly imprinted microsphere for niclosamide was first synthesized, and a streptavidin-horseradish peroxidase labelled conjugate was also synthesized. The two reagents were used to develop a pseudo enzyme-linked immunosorbent assay on conventional microplates for the determination of niclosamide and its two metabolites (2-chloro-4-nitroaniline and 5-chlorosalicylic acid) in fish. Because biotinylated horseradish peroxidase was used to amplify the signal, the method sensitivities for the three analytes were increased fivefold to 27.5-fold (limits of detection of 0.004-0.03 ng/mL) in comparison with the use of single horseradish peroxidase labelled conjugate (limits of detection of 0.11-0.16 ng/mL). Their recoveries from the standards fortified blank fish samples were in the range of 70.6-95.5%. This is the first study reporting a molecularly imprinted polymer-based pseudo immunoassay for screening of niclosamide and its metabolites in food sample.

Recent progress and perspectives of metal organic frameworks (MOFs) for the detection of food contaminants

Over the past decades, increasing research in metal-organic frameworks (MOFs) being a large family of highly tunable porous materials with intrinsic physical properties, show propitious results for a wide range of applications in adsorption, separation, electrocatalysis, and electrochemical sensors. MOFs have received substantial attention in electrochemical sensors owing to their large surface area, active metal sites, high chemical and thermal stability, and tunable structure with adjustable pore diameters. Benefiting from the superior properties, MOFs and MOF-derived carbon materials act as promising electrode material for the detection of food contaminants. Although several reviews have been reported based on MOF and its nanocomposites for the detection of food contaminants using various analytical methods such as spectrometric, chromatographic, and capillary electrophoresis. But there no significant review has been devoted to MOF/and its derived carbon-based electrodes using electrochemical detection of food contaminants. Here we review and classify MOF-based electrodes over the period between 2017 and 2022, concerning synthetic procedures, electrode fabrication process, and the possible mechanism for detection of the food contaminants which include: heavy metals, antibiotics, mycotoxins, and pesticide residues. The merits and demerits of MOF as electrode material and the need for the fabrication of MOF and its composites/derivatives for the determination of food contaminants are discussed in detail. At last, the current opportunities, key challenges, and prospects in MOF for the development of smart sensing devices for future research in this field are envisioned.

MIP-based immunoassays: A critical review

Molecularly imprinted polymers, MIPs, are man-made receptors mimicking the thermodynamic and kinetic binding behaviour of natural antibodies. Therefore, it is not surprising that many researchers have thought about MIPs as artificial receptors in immunoassay-like analytical applications, where the general machinery of the assay is maintained, but the molecular recognition is no longer assured by an antibody but by an artificial receptor. However, the number of papers devoted explicitly to applications of MIPs in the immunoassay field is quite limited if compared to the huge number of papers covering the multifaceted molecular imprinting technology. For this reason, this critical review wants to give a general view of MIP-based immunoassays, trying to highlight the critical points that have so far prevented a wider application of molecular imprinting technology in the immunoassay field and, possibly, try to suggest strategies to overcome them.

Development of a Magnetic Molecularly Imprinted Microsphere-Based Signal Amplified Semi-Homogeneous Method for Multidetection of Five Progestins in Milk

The residues of progestins in milk are significant risk factors for teenage acne and may cause hormone-dependent cancers in consumers, so the determination of these residues in milk is very important. However, an immunoassay or immunoassay-like method capable of determining multiple progestins in milk has not been reported so far. The present study, for the first time, synthesized a type of magnetic molecularly imprinted microsphere that was capable of simultaneously recognizing five progestins. At the same time, an enzyme labeled conjugate was synthesized by coupling progesterone 3-(o-carboxymethyl)oxime with streptavidinated horseradish peroxidase. The above two reagents were used to develop a semi-homogeneous method for the simultaneous detection of the residues of the five progestins in milk. During the experiments, biotinylated horseradish peroxidase was used to amplify the signal, so the sensitivity to the five drugs (limits of detection 0.04-0.1 pg/mL) was increased 44-75-fold. In addition, the magnetic molecularly imprinted microsphere could be regenerated four times by using simple elution. Through general comparison of its detection spectrum, sensitivity, simplicity, and reusability, the present method exhibited better performance than the previous immunoassays for the detection of progestins, and so it could be used as a routine tool for the screening of progestins residues in milk.

Rational In Silico Design of Molecularly Imprinted Polymers: Current Challenges and Future Potential

The rational design of molecularly imprinted polymers has evolved along with state-of-the-art experimental imprinting strategies taking advantage of sophisticated computational tools. In silico methods enable the screening and simulation of innovative polymerization components and conditions superseding conventional formulations. The combined use of quantum mechanics, molecular mechanics, and molecular dynamics strategies allows for macromolecular modelling to study the systematic translation from the pre- to the post-polymerization stage. However, predictive design and high-performance computing to advance MIP development are neither fully explored nor practiced comprehensively on a routine basis to date. In this review, we focus on different steps along the molecular imprinting process and discuss appropriate computational methods that may assist in optimizing the associated experimental strategies. We discuss the potential, challenges, and limitations of computational approaches including ML/AI and present perspectives that may guide next-generation rational MIP design for accelerating the discovery of innovative molecularly templated materials.

Molecularly imprinted polymers as effective capturing receptors in a pseudo-ELISA immunoassay for procalcitonin detection in veterinary species

In this study, a new sandwich-type immunoenzymatic assay, based on a molecularly imprinted polymer (MIP) as an artificial antibody (pseudo-ELISA), was developed for the determination of procalcitonin (PCT) in veterinary species. The quantification of PCT in human medicine represents the state of the art for the diagnosis of sepsis; instead the clinical studies on the relevance of PCT as a sepsis predictor in veterinary patients are few, likely due to the total absence of validated assays. MIPs have been widely used as antibody mimics for important applications, and MIP-based sandwich assays have emerged as promising analytical tools for the detection of disease biomarkers. Herein, a polynorepinephrine (PNE)-based imprinted film was directly synthesized on the well surface of a 96-well plate. Subsequently, based on a commercial ELISA kit, the PCT quantification was accomplished via a colorimetric sandwich assay by replacing the capture antibody of the kit with the PNE-based MIP. This method was performed to detect canine and equine PCT in buffer and in plasma samples. Under optimal conditions, the results obtained in plasma samples showed a limit of detection (LOD) of 5.87 ng mL^-1 and a reproducibility (CV_av%) of 10.0% for canine samples, while a LOD = 4.46 ng mL^-1 and CV_av% = 7.61% were obtained for equine samples.

Effect of Surfactants on the Binding Properties of a Molecularly Imprinted Polymer

In molecularly imprinted polymers, non-specific interactions are generally based on weak forces between the polymer surface and the sample matrix. Thus, additives able to interfere with such interactions should be able to significantly reduce any non-specific binding effect. Surfactants represent an interesting class of substances as they are cheap and easily available. Here, we present a study of the effect of three surfactants (the anionic sodium dodecylsulphate, SDS, the cationic cetyltrimethylammonium bromide (CTAB) and the non-ionic polyoxyethylene-(20)-sorbitan monolaurate Tween 20) on the binding affinity of a 2,4,5-trichlorophenoxyacetic acid (2,4,5-T)-imprinted polymer for the template and its analogue 2,4-dichlorophenoxyacetic acid (2,4-D). The experimental results indicate that increasing amounts of surfactant decrease the binding affinity for the ligands strongly for the ionic ones, and more weakly for the non-ionic one. This effect is general, as it occurs for both 2,4,5-T and 2,4-D and for both the imprinted and the not-imprinted polymers. It also proves that the magnitude of this effect mainly depends on the presence or absence of an ionic charge, and that the hydrophobic "tail" of surfactants plays only a minor role.

Nanomaterial-Based Fluorescent Biosensor for Food Safety Analysis

Food safety issues have become a major threat to public health and have garnered considerable attention. Rapid and effective detection methods are crucial for ensuring food safety. Recently, nanostructured fluorescent materials have shown considerable potential for monitoring the quality and safety of food because of their fascinating optical characteristics at the nanoscale. In this review, we first introduce biomaterials and nanomaterials for food safety analysis. Subsequently, we perform a comprehensive analysis of food safety using fluorescent biosensors based on nanomaterials, including mycotoxins, heavy metals, antibiotics, pesticide residues, foodborne pathogens, and illegal additives. Finally, we provide new insights and discuss future approaches for the development of food safety detection, with the aim of improving fluorescence detection methods for the practical application of nanomaterials to ensure food safety and protect human health.

A Molecularly Imprinted Polymer-Based Thermal Sensor for the Selective Detection of Melamine in Milk Samples

In recent years, melamine-sensing technologies have increasingly gained attention, mainly due to the misuse of the molecule as an adulterant in milk and other foods. Molecularly imprinted polymers (MIPs) are ideal candidates for the recognition of melamine in real-life samples. The prepared MIP particles were incorporated into a thermally conductive layer via micro-contact deposition and its response towards melamine was analyzed using the heat-transfer method (HTM). The sensor displayed an excellent selectivity when analyzing the thermal response to other chemicals commonly found in foods, and its applicability in food safety was demonstrated after evaluation in untreated milk samples, demonstrating a limit of detection of 6.02 μM. As the EU/US melamine legal limit in milk of 2.5 mg/kg falls within the linear range of the sensor, it can offer an innovative solution for routine screening of milk samples in order to detect adulteration with melamine. The results shown in this work thus demonstrate the great potential of a low-cost thermal platform for the detection of food adulteration in complex matrices.

Giant Magnetoresistance Biosensors for Food Safety Applications

Nowadays, the increasing number of foodborne disease outbreaks around the globe has aroused the wide attention of the food industry and regulators. During food production, processing, storage, and transportation, microorganisms may grow and secrete toxins as well as other harmful substances. These kinds of food contamination from microbiological and chemical sources can seriously endanger human health. The traditional detection methods such as cell culture and colony counting cannot meet the requirements of rapid detection due to some intrinsic shortcomings, such as being time-consuming, laborious, and requiring expensive instrumentation or a central laboratory. In the past decade, efforts have been made to develop rapid, sensitive, and easy-to-use detection platforms for on-site food safety regulation. Herein, we review one type of promising biosensing platform that may revolutionize the current food surveillance approaches, the giant magnetoresistance (GMR) biosensors. Benefiting from the advances of nanotechnology, hundreds to thousands of GMR biosensors can be integrated into a fingernail-sized area, allowing the higher throughput screening of food samples at a lower cost. In addition, combined with on-chip microfluidic channels and filtration function, this type of GMR biosensing system can be fully automatic, and less operator training is required. Furthermore, the compact-sized GMR biosensor platforms could be further extended to related food contamination and the field screening of other pathogen targets.

A biomimetic enzyme-linked immunosorbent assay (BELISA) for the analysis of gonadorelin by using molecularly imprinted polymer-coated microplates

An original biomimetic enzyme-linked immunoassay (BELISA) to target the small peptide hormone gonadorelin is presented. This peptide has been recently listed among the substances banned in sports by the World Antidoping Agency (WADA) since its misuse by male athletes triggers testosterone increase. Hence, in response to this emerging issue in anti-doping controls, we proposed BELISA which involves the growth of a polynorepinephrine (PNE)-based molecularly imprinted polymer (MIP) directly on microwells. PNE, a polydopamine (PDA) analog, has recently displayed impressive performances when it was exploited for MIP preparation, giving even better results than PDA. Gonadorelin quantification was accomplished via a colorimetric indirect competitive bioassay involving the competition between biotinylated gonadorelin linked to the signal reporter and the unlabeled analyte. These compete for the same MIP binding sites resulting in an inverse correlation between gonadorelin concentration and the output color signal (λ = 450 nm). A detection limit of 277 pmol L-1 was achieved with very good reproducibility in standard solutions (avCV% = 4.07%) and in urine samples (avCV% = 5.24%). The selectivity of the assay resulted adequate for biological specimens and non-specific control peptides. In addition, the analytical figures of merit were successfully validated by mass spectrometry, the reference anti-doping benchtop platform for the analyte. BELISA was aimed to open real perspectives for PNE-based MIPs as alternatives to antibodies, especially when the target analyte is a poorly or non-immunogenic small molecule, such as gonadorelin. Biomimetic enzyme-linked immunosorbent assay (BELISA).

Determination of fluoroquinolones in chicken muscle by molecularly imprinted graphitic carbon nitride-based solid-phase extraction and ultra-performance liquid chromatography

A graphitic carbon nitride was synthesised and nalidixic acid (NA) based molecularly imprinted microspheres (MIMs) were polymerised on its surface to create a composite material. After characterisation and evaluation of its absorption ability, the composite was used to prepare a solid-phase extraction (SPE) cartridge for purification of fluoroquinolones in chicken muscle, analysed by ultra-performance liquid chromatography. The cartridge showed high absorption capacities (378-559 μg) and high recoveries (92.1-99.4%) for eight fluoroquinolones, and could be reused at least 20 times. The limits of detection for the 8 drugs were 0.2-0.8 ng g^-1, and recoveries from standard fortified blank chicken muscle samples were 71.9-96.8%. This is the first study reporting the use of molecularly imprinted graphitic carbon nitride composite to determine the residue of veterinary drug in foods of animal origin.

Chemiluminescence sensors based on molecularly imprinted polymers for the determination of organophosphorus in milk

As a food adapted to all kinds of people, milk has a high nutritional value. Because milk is a complex biological matrix, detecting illegal compounds is often difficult. As a common pesticide, organophosphorus (OP) residues caused by nonstandard use may be ignored, which is a threat to milk quality. In this study, using coumaphos as template molecule, the synthesized molecularly imprinted polymer (MIP) can specifically recognize 7 kinds of OP. Then, the MIP was used as an identification element to prepare a chemiluminescence sensor on a 96-well microplate for the determination of OP residues in milk samples. Due to the 4-(imidazol-1-yl)phenol-enhanced luminol-H₂O₂ system, the sensitivity of the system is very high; the detection limits of 7 OP including coumaphos, fenthion, chlorpyrifos, parathion, diazinon, fenchlorphos, and fenitrothion were 1 to 3 pg/mL, and the half maximal inhibitory concentrations were 1 to 20 ng/mL. The intraday recoveries of 7 OP were in the range of 86.1 to 86.5%, and the interday recoveries were in the range of 83.6 to 94.2%. Furthermore, the sensor can be reused up to 5 times. Therefore, the MIP-based chemiluminescence sensor can be used as a routine tool to detect OP residues in milk samples.

The Selectivity of Immunoassays and of Biomimetic Binding Assays with Imprinted Polymers

Molecularly imprinted polymers have been shown to be useful in competitive biomimetic binding assays. Recent developments in materials science have further enhanced the capabilities of imprinted polymers. Binding assays, biological and biomimetic alike, owe their usefulness to their selectivity. The selectivity of competitive binding assays has been characterized with the cross-reactivity, which is usually expressed as the ratio of the measured IC50 concentration values of the interferent and the analyte, respectively. Yet this cross-reactivity is only a rough estimate of analytical selectivity. The relationship between cross-reactivity and analytical selectivity has apparently not been thoroughly investigated. The present work shows that this relationship depends on the underlying model of the competitive binding assay. For the simple but widely adopted model, where analyte and interferent compete for a single kind of binding site, we provide a simple formula for analytical selectivity. For reasons of an apparent mathematical problem, this formula had not been found before. We also show the relationship between analytical selectivity and cross-reactivity. Selectivity is also shown to depend on the directly measured quantity, e.g., the bound fraction of the tracer. For those cases where the one-site competitive model is not valid, a practical procedure is adopted to estimate the analytical selectivity. This procedure is then used to analyze the example of the competitive two-site binding model, which has been the main model for describing molecularly imprinted polymer behavior. The results of this work provide a solid foundation for assay development.

Electrochemical Affinity Assays/Sensors: Brief History and Current Status

The advent of electrochemical affinity assays and sensors evolved from pioneering efforts in the 1970s to broaden the field of analytes accessible to the selective and sensitive performance of electrochemical detection. The foundation of electrochemical affinity assays/sensors is the specific capture of an analyte by an affinity element and the subsequent transduction of this event into a measurable signal. This review briefly covers the early development of affinity assays and then focuses on advances in the past decade. During this time, progress on electroactive labels, including the use of nanoparticles, quantum dots, organic and organometallic redox compounds, and enzymes with amplification schemes, has led to significant improvements in sensitivity. The emergence of nanomaterials along with microfabrication and microfluidics technology enabled research pathways that couple the ease of use of electrochemical detection for the development of devices that are more user friendly, disposable, and employable, such as lab-on-a-chip, paper, and wearable sensors.

Synthesis of molecularly imprinted microspheres and development of a fluorescence method for detection of chloramphenicol in meat

In this study, nitrobenzene was used as dummy template to synthesize a type of specific molecularly imprinted microspheres for chloramphenicol, and 4-nitroaniline was coupled with three fluorophores to synthesize three fluorescent tracers. Then a competitive fluorescence method was developed on a conventional microplate for detection of chloramphenicol in chicken and pork samples. This method contained only one sample-loading step, so one assay was finished within 30 min. The IC₅₀ was 1.8 ng/ml, and the limit of detection was 0.06 ng/g. The recoveries from chloramphenicol-fortified blank meat samples were in the range 67.5-96.2%. Furthermore, this method could be recycled three times. The detection results for some real meat samples were identical to that of a LC-MS/MS method. Therefore, this method could be used as a practical tool for routine screening for the residue of chloramphenicol in large number of meat samples.

The Selectivity of Molecularly Imprinted Polymers

The general claim about novel molecularly imprinted polymers is that they are selective for their template or for another target compound. This claim is usually proved by some kind of experiment, in which a performance parameter of the imprinted polymer is shown to be better towards its template than towards interferents. A closer look at such experiments shows, however, that different experiments may differ substantially in what they tell about the same imprinted polymer's selectivity. Following a short general discussion of selectivity concepts, the selectivity of imprinted polymers is analyzed in batch adsorption, binding assays, chromatography, solid phase extraction, sensors, membranes, and catalysts. A number of examples show the problems arising with each type of application. Suggestions for practical method design are provided.

Development of a molecularly imprinted microspheres-based microplate fluorescence method for detection of amantadine and rimantadine in chicken

In this study, molecularly imprinted microspheres of a type capable of recognising amantadine and rimantadine were first synthesised, and three fluorescent tracers based on dansyl chloride, fluorescein isothiocyanate and 5-carboxytetramethylrhodamine were also synthesised. These reagents were used to develop and optimise a direct competitive fluorescence method on conventional 96-well microplate for detection of the two analytes. Results showed that this method achieved simple operation procedure, rapid assay process (30 min), high sensitivity (limits of detection 0.04-0.05 ng mL^-1) and acceptable recycle performance (five times). After optimisation of several parameters, this method was used to detect amantadine and rimantadine in chicken muscle samples. Their recoveries from standards fortified blank samples were in the range of 62.3-93.7%. The analysis results for some real chicken samples were consistent with a confirmatory LC-MS/MS method. Therefore, this method could be used as a rapid, simple and accurate tool for routine screening the residues of amantadine and rimantadine in a large number of chicken muscle samples.

Molecularly imprinted polymer-enhanced biomimetic paper-based analytical devices: A review

The popularization of paper-based analytical devices (PADs) in analytical science has fostered research on enhancing their analytical performance for accurate and sensitive assays. With their superb recognition capability and structural stability, molecularly imprinted polymers (MIPs) have been extensively employed as biomimetic receptors for capturing target analytes in various complex matrices. The integration of MIPs as recognition elements with PADs (MIP-PADs) has opened new opportunities for advanced analytical devices with elevated selectivity and sensitivity, as well as a shorter assay time and a lower cost. This review covers recent advances in MIP-PAD fabrication and engineering based on multifarious signal transduction systems such as colorimetry, fluorescence, electrochemistry, photoelectrochemistry, and chemiluminescence. The application of MIP-PADs in the fields of biomedical diagnostics, environmental analysis, and food safety monitoring is also reviewed. Further, the advantages, challenges, and perspectives of MIP-PADs are discussed.

Fluorescence Polarization-Based Bioassays: New Horizons

Fluorescence polarization holds considerable promise for bioanalytical systems because it allows the detection of selective interactions in real time and a choice of fluorophores, the detection of which the biosample matrix does not influence; thus, their choice simplifies and accelerates the preparation of samples. For decades, these possibilities were successfully applied in fluorescence polarization immunoassays based on differences in the polarization of fluorophore emissions excited by plane-polarized light, whether in a free state or as part of an immune complex. However, the results of recent studies demonstrate the efficacy of fluorescence polarization as a detected signal in many bioanalytical methods. This review summarizes and comparatively characterizes these developments. It considers the integration of fluorescence polarization with the use of alternative receptor molecules and various fluorophores; different schemes for the formation of detectable complexes and the amplification of the signals generated by them. New techniques for the detection of metal ions, nucleic acids, and enzymatic reactions based on fluorescence polarization are also considered.

Screening and application of a truncated aptamer for high-sensitive fluorescent detection of metronidazole

Aptamer-based biosensors have been widely constructed and applied to detect diverse targets. Metronidazole is a widely used broad-spectrum antibacterial drug, whose residue has multiple risks to human health. Herein, metronidazole-specific aptamers were selected from a random ssDNA library with the full length of 79 nucleotides (nt) based on DNA library-immobilized magnetic beads SELEX technology. After ten rounds of selection, four aptamers with highly similar secondary structures were selected, among which AP32, with the lowest dissociation constants, was chosen as the optimal aptamer for further optimization. Then a semi-rational post-SELEX truncation was carried out based on the secondary structure analysis and molecular docking, as well as affinity assessment. Redundant nucleotides in AP32 were stepwise removed without the decrease of affinity. Following such strategy, a truncated aptamer AP32-4 with the length of only 15 nt was eventually screened. The dissociation constant of 77.22 ± 11.27 nM is almost equivalent to the original AP32. Furthermore, an aptamer-based fluorescent biosensor for metronidazole was constructed based on AP32-4. With the help of exonuclease-assisted target-recycling amplification, the biosensor exhibits a linear detection range of 25-800 nM, and the detection limit of 10.50 nM. The biosensor was applied to detect metronidazole in honey samples. The results show that not only an efficient strategy for screening robust and practicable aptamers, but also an ultrahigh sensitive detection platform for metronidazole were established.

Molecularly imprinted microspheres based multiplexed fluorescence method for simultaneous detection of benzimidazoles and pyrethroids in meat samples

Two molecularly imprinted microspheres and two fluorescent tracers for benzimidazoles and pyrethroids were synthesized respectively. The two types of microspheres were coated in the wells of conventional microplate simultaneously. Then the sample extracts and the two traces were added for differential competition. The fluorescence intensities at two different emission wavelengths were excited and recorded for quantification of the two classes of drugs respectively. The optimized multiplexed fluorescence method could be used to determine 8 benzimidazoles and 10 pyrethroids in mutton and beef samples simultaneously. The limits of detection of the method for the 18 drugs were in the range of 5.2-17 ng/mL, and the recoveries from the standards fortified blank samples were in the range of 67.7%-109%. From the analysis of 60 real mutton and beef samples, this method could be used for multi-screening the residues of benzimidazoles and pyrethroids in meat samples.

Monitoring pharmaceuticals in the aquatic environment using enzyme-linked immunosorbent assay (ELISA)-a practical overview

The presence of pharmaceuticals, which are considered as contaminants of emerging concern, in natural waters is currently recognized as a widespread problem. Monitoring these contaminants in the environment has been an important field of research since their presence can affect the ecosystems even at very low levels. Several analytical techniques have been developed to detect and quantify trace concentrations of these contaminants in the aquatic environment, namely high-performance liquid chromatography, gas chromatography, and capillary electrophoresis, usually coupled to different types of detectors, which need to be complemented with time-consuming and costly sample cleaning and pre-concentration procedures. Generally, the enzyme-linked immunosorbent assay (ELISA), as other immunoassay methodologies, is mostly used in biological samples (most frequently urine and blood). However, during the last years, the number of studies referring the use of ELISA for the analysis of pharmaceuticals in complex environmental samples has been growing. Therefore, this work aims to present an overview of the application of ELISA for screening and quantification of pharmaceuticals in the aquatic environment, namely in water samples and biological tissues. The experimental procedures together with the main advantages and limitations of the assay are addressed, as well as new incomes related with the application of molecular imprinted polymers to mimic antibodies in similar, but alternative, approaches. Graphical Abstract.

A microtitre chemiluminescence sensor for detection of pyrethroids based on dual-dummy-template molecularly imprinted polymer and computational simulation

The residues of pyrethroids in foods of animal origin are dangerous to the consumers, so this study presented a chemiluminescence sensor for determination of pyrethroids in chicken samples. A dual-dummy-template molecularly imprinted polymer capable of recognizing 10 pyrethroids was synthesized. The results of computation simulation showed that the specific 3D conformations of the templates had important influences on the polymer' recognition ability. The polymer was used to prepare a sensor on conventional 96-well microplates, and the sample solution was added into the wells for direct absorption. The absorbed analytes were initiated with the bis(2,4,6-trichlorophenyl)oxalate-H₂ O₂ -imidazole system, and the chemiluminescence intensity was used for analyte quantification. Results showed that one assay was finished within 12 min, and this sensor could be reused four times. The limits of detection for the 10 analytes were in the range o0.3-6.0 pg/ml, and the recoveries from the standards of fortified blank chicken samples were in the range 70.5-99.7%.

Differential potential ratiometric sensing platform for enantiorecognition of chiral drugs

A versatile, robust and efficient differential potential ratiometric sensing platform was developed for enantioselective recognition of dual chiral targets based on a composite membrane of molecularly imprinted polymers (MIPs) and reduced graphene oxide (rGO) modified glassy carbon electrode (GCE). The functional chitosan-based MIPs and rGO were compatibly immobilized on the GCE with high selectivity and efficient signal amplification. Moreover, via the systematic optimization of series conditions, a distinct potential difference (PD), reaching 135 mV, was obtained between the R-/S-prop based on the MIPs/rGO/GCE. In a controllable concentration range from 50 μM to 1000 μM, different ratios of R-/S-prop were linearly related to the peak potentials (Eps) in the racemic mixture. Using this low-cost reversible electrochemical platform, both Prop enantiomers were simultaneously identified with high repeatability and time-based stability. This novel semi-quantitative electrochemical sensing platform was established to rapidly quantify the ratio of S-/R-prop by Ep for the chiral drug recognition with great potential for practical applications in fields of pharmacological detection and clinical analysis.

Molecular Imprinting of Cyclodextrin Supramolecular Hydrogels Improves Drug Loading and Delivery

Cyclodextrin-based controlled delivery materials have previously been developed for controlled release of different therapeutic drugs. In this study, a supramolecular hydrogel made from cyclodextrin-based macromonomers is subjected to molecular imprinting to investigate the impact on release kinetics and drug loading, when compared with non-imprinted, or alternately imprinted hydrogels. Mild synthesis conditions are used to molecularly imprint three antibiotics-novobiocin, rifampicin, and vancomycin-and to test two different hydrogel chemistries. The release profile and drug loading of the molecularly imprinted hydrogels are characterized using ultraviolet spectroscopy over a period of 35 days and compared to non-imprinted, and alternately imprinted hydrogels. While only modest differences are observed in the release rate of the antibiotics tested, a substantial difference is observed in the total drug-loading amount possible for hydrogels releasing drugs which has been templated by those drugs. Hydrogels releasing drugs which are templated by other drugs do not show improved release or loading. Analysis by FTIR does not show substantial incorporation of drug into the polymer. Lastly, bioactivity assays confirmed long-term stability and release of incorporated antibiotics.

Highly sensitive visual detection of amantadine residues in poultry at the ppb level: A colorimetric immunoassay based on a Fenton reaction and gold nanoparticles aggregation

Colorimetric biosensors for the on-site visual detection of veterinary drug residues are required for food control in developing countries and other resource-constrained areas, where sophisticated instruments may not be available. In this study, we developed a highly sensitive immunoassay for amantadine residues in poultry. By introducing a novel signal generation strategy into an indirect competitive immunoassay, a highly sensitive assay for amantadine residues in chicken was achieved for naked eye readout at the part per billion (ppb) level. Signal amplification was achieved in the designed immunoassay by combining conventional indirect competitive enzyme-linked immunosorbent assay, Fenton reaction-regulated oxidation of cysteine, and gold nanoparticle aggregation. Therefore, the cascade reaction remarkably enhanced the assay sensitivity and led to a pronounced color change from red to dark purple in the solution, which could be easily distinguished with the naked eye even at approximately 1 μg kg^-1 in poultry muscle. Moreover, the color change can be quantitatively assayed with a classic high-throughput plate reader for contaminated poultry samples. The limit of detection (LOD) was 0.51 nM (0.095 ng mL^-1). The recovery rates for spiked chicken samples ranged from 78% to 84% with relative standard deviations <15%. Therefore, we propose that this immunoassay could be generally applicable for on-site detection in the field of food control.