Selection of a DNA Aptamer against Zearalenone and Docking Analysis for Highly Sensitive Rapid Visual Detection with Label-Free Aptasensor

An electrochemical aptasensor for the detection of bisphenol A based on triple signal amplification assisted by gold nanoparticles, hemin/G-quadruplex DNAzyme, and exonuclease I

A triple signal amplified electrochemical aptasensor for the detection of bisphenol A (BPA) was developed for the first time based on gold nanoparticles (AuNPs), hemin/G-quadruplex DNAzyme, and exonuclease I (Exo I) assisted amplification strategies. The BPA aptamer (Apt) hybridized with the capture probe (CP) was fixed on the gold electrode (GE) to form the double-stranded DNA (dsDNA) structure. When BPA was present, the Apt was detached from the GE surface by specific recognition between the BPA and Apt, forming BPA-Apt complexes in solution. The complexes could be selectively digested by Exo I, releasing BPA to participate in the cycle for binding to other Apt in dsDNA. The hybridization of the CP and auxiliary DNA (aDNA) within the detect probe DNA (dpDNA)-AuNP-aDNA nanocomplex allowed the nanocomplex to connect to the GE surface. The dpDNA interacted with K+ and hemin to produce hemin/G-quadruplex DNAzyme, which catalyzed H2O2 reduction, accelerated methylene blue (MB) oxidization, and further amplified the electrochemical signal. The integration of triple signal amplification strategies with aptamer-specific recognition enabled sensitive and specific detection of BPA. Under optimized conditions, the aptasensor exhibited a linear range of 0.1 pM-10 nM, with a low detection limit of 76 fM. Moreover, the designed aptasensor was successfully applied to detect BPA in lake water, fruit juice, and honey samples.

An impedimetric determination of zearalenone on MIP-modified carboceramic electrode

Zearalenone (ZEN) is a mycotoxin that poses significant risks to human and animal health due to its mutagenic, immunosuppressive, and carcinogenic properties. This study presents a novel analytical method for detecting ZEN using electrochemical impedance spectroscopy (EIS) combined with a molecularly imprinted polymer (MIP). ZEN, used as the template molecule, was incorporated into polypyrrole on screen-printed electrodes (SPE), and a ZEN-sensitive MIP sensor was created through template removal. The modified sensor surfaces were characterized by EIS and scanning electron microscopy (SEM). An impedimetric MIP sensor for ZEN was developed, offering a detection range from 1 pM to 500 pM. The method's limit of detection (LOD) was established at 1 pM (0.3 pg/mL) with a signal-to-noise ratio of 3 (S/N = 3). The method demonstrated high precision and accuracy, with a maximum relative standard deviation (RSD) of less than 4.4% at a 95% confidence level, and relative error (RE) values ranging from -0.8% to -2.7%. The selectivity of the developed MIP sensor was evaluated using ochratoxin A, ochratoxin B, and aflatoxin B1, with no significant interference observed. ZEN recovery from spiked samples was between 95% and 105%, indicating that the method was successfully applied to grain samples, including corn, rice, and wheat.

In Silico Analysis of Binding Sites for a Novel ssDNA Aptamer Specific to Verrucarin A and Detection in Dust Extracts

An aptamer is a single-stranded oligonucleotide that serves as a chemical antibody with a high specificity and binding affinity that can recognize a wide range of molecules. Effective modification and truncation of aptamers can enhance their binding affinities to particular targets while also broadening their application for uses, such as biosensors. However, a conventional trial-and-error methodology hinders this process. Herein, we demonstrate an in silico method to elucidate the binding site of single-stranded DNA aptamer specific to verrucarin A, a mycotoxin produced by molds in indoor buildings that causes adverse effects in living organisms. The novel ssDNA aptamer exhibited a binding affinity of 29.5 nM, demonstrating a relatively strong affinity compared to those of previously reported typical aptamers for small molecules. Furthermore, the selected aptamer was highly specific toward verrucarin A among structurally related mycotoxins (i.e., verrucarol and zearalenone). The specific binding site of the aptamer predicted via molecular dynamics and molecular docking simulations was highly consistent with the results observed via truncation, single base mutation, and circular dichroism experiments. The fluorescence assay revealed limits of detection and quantification of 4.1 and 12 nM for the aptamer, respectively. Comparing our developed aptasensor with LC-MS/MS methodology revealed that it could detect verrucarin A levels in phosphate-buffered saline and dust extracts with robust precision and consistency. Our findings provide insight for future studies exploring interaction mechanisms with intended targets and practical sensing applications, such as point-of-care detection of verrucarin A.

Perspectives in Aptasensor-Based Portable Detection for Biotoxins

Biotoxins are pervasive in food and the environment, posing significant risk to human health. The most effective strategy to mitigate the risk arising from biotoxin exposure is through their specific and sensitive detection. Aptasensors have emerged as pivotal tools, leveraging aptamers as biorecognition elements to transduce the specificity of aptamer-target interactions into quantifiable signals for analytical applications, thereby facilitating the meticulous detection of biotoxins. When integrated with readily portable devices such as lateral flow assays (LFAs), personal glucose meters (PGMs), smartphones, and various meters measuring parameters like pH and pressure, aptasensors have significantly advanced the field of biotoxin monitoring. These commercially available devices enable precise, in situ, and real-time analysis, offering great potential for portable biotoxin detection in food and environmental matrices. This review highlights the recent progress in biotoxin monitoring using portable aptasensors, discussing both their potential applications and the challenges encountered. By addressing these impediments, we anticipate that a portable aptasensor-based detection system will open new avenues in biotoxin monitoring in the future.

Magnetic aptamer copper nanoclusters fluorescent biosensor for the visual detection of zearalenone based on docking-aided rational tailoring

To address the food safety issues caused by toxins, we established a fluorescent copper nanocluster biosensor based on magnetic aptamer for the visual and quantitative detection of ZEN. Specifically, we utilized the docking-aided rational tailoring (DART) strategy to analyze intermolecular force and interaction sites between zearalenone (ZEN) and the aptamer, and optimize the long-chain aptamer step by step to enhance the binding affinity by 3.4 times. The magnetic bead-modified aptamer underwent conformational changes when competing with complementary sequences to bind with ZEN. Then, the released complementary sequences will be amplified in template-free mode with the presence of the terminal deoxynucleotidyl transferase (TdT), and generating T-rich sequences as the core sequences for the luminescence of copper nanoclusters. The luminescence could be visualized and quantitatively detected through ultraviolet irradiation. The proposed label-free aptasensor exhibited high sensitivity and specificity, with a low limit of detection (LOD) of 0.1 ng/mL.

A review on magnetic beads-based SELEX technologies: Applications from small to large target molecules

This review summarizes the stepwise strategy and key points for magnetic beads (MBs)-based aptamer selection which is suitable for isolating aptamers against small and large molecules via systematic evolution of ligands by exponential enrichment (SELEX). Particularities, if any, are discussed according to the target size. Examples targeting small molecules (<1000 Da) such as xenobiotics, toxins, pesticides, herbicides, illegal additives, hormones, and large targets such as proteins (biomarkers, pathogens) are discussed and presented in tabular formats. Of special interest are the latest advances in more efficient alternatives, which are based on novel instrumentation, materials or microelectronics, such as fluorescence MBs-SELEX or microfluidic chip system-assisted MBs-SELEX. Limitations and perspectives of MBs-SELEX are also reviewed. Taken together, this review aims to provide practical insights into MBs-SELEX technologies and their ability to screen multiple potential aptamers against targets from small to large molecules.

A smartphone-assisted colorimetric aptasensor based on aptamer and gold nanoparticles for visual, fast and sensitive detection of ZEN in maize

A simple, fast, low cost, sensitive, intuitive, visual, label-free, and smartphone-assisted aptamer sensor based on colorimetric assay for the measurement of zearalenone was constructed. The nucleic acid aptamer of zearalenone was used as the recognition element and gold nanoparticles were used as the indicator. Several factors that could influence sensitivity, including the concentration of aptamer and NaCl, and incubation time, and specificity, have been investigated. The results showed that under the optimal conditions, the signal had a good linear relationship when zearalenone concentration is 5-300 ng/mL. A linear regression equation is Y = 0.0003X + 0.5128 (R2 = 0.9989) and a limit of detection is 5 ng/mL. The specificity of the sensor was good. Zearalenone in maize samples were successfully measured. The recoveries of Zearalenone are 81.3 %-96.4 %. The whole process takes only 15 min to complete. The smartphone assisted colorimetric aptamer sensor can be used for the detection of zearalenone in maize.

A quantum dot aptamer fluorescent sensor based on magnetic graphene oxide for the detection of zearalenone

As an estrogenic mycotoxin found in a wide range of agricultural crops, the toxicity of zearalenone (ZEN) poses a serious risk to human health. Accordingly, to achieve rapid detection of zearalenone in complex samples, an aptamer fluorescence sensor based on magnetic graphene oxide was developed. Compared with traditional methods, this technique has the virtues of simple operation, low cost, and reliable performance. Magnetic graphene oxide (MGO) was synthesized as a fluorescent bursting agent, using a chemical precipitation approach by depositing Fe3O4 on the surface of graphene oxide. As a fluorescent probe, an aptamer coupling with CdTe quantum dots and zearalenone was used. Following the specific binding of zearalenone and the aptamer, the affinity interaction between the fluorescent probe and MGO was weakened, resulting in the recovery of fluorescence and making the qualitative and quantitative analysis of zearalenone available via fluorescence intensity determination. The results indicated that the method's linear range was 5-120 μg L-1 and its detection limit was 2.9 μg L-1. In addition, the recoveries varied from 76.4 to 118.8% for crop samples, with relative standard deviations (RSDs) between 0.8 and 9.5%, which suggests an effective method for the separation and detection of mycotoxins in actual environmental samples.

An immobilization-free electrochemical aptamer-based assay for zearalenone based on target-triggered dissociation of DNA from polydopamine nanospheres with strand displacement amplification

Zearalenone (ZEN), a widespread mycotoxin, can cause great harm to people's health. In order to assay ZEN, an immobilization-free electrochemical sensor has been developed. A multifunctional hairpin DNA has been carefully designed, including three functions: the aptamer for zearalenone (ZEN), primer, and template sequence. This hairpin DNA can anchor on polydopamine nanospheres (PDANSs), which can protect DNA against the digestion of enzymes and prevent the occurrence of strand displacement amplification (SDA). In the presence of ZEN, the hairpin DNA is dissociated from PDANSs due to the interaction between ZEN and the aptamer, and the SDA reaction is initiated with the help of endonuclease and polymerase. During the SDA process, substantial amounts of negatively charged dsDNA are generated. The MB molecules are embedded into the dsDNA grooves to obtain the complex with a negative charge. The confined MB is repelled on the surface of the negatively charged ITO electrode, leading to the decline of the current. This immobilization-free method possesses high sensitivity (LOD of 0.18 pg mL^-1) and good selectivity and can be applied to assay ZEN in corn flour.

A Novel and Label-Free Chemiluminescence Detection of Zearalenone Based on a Truncated Aptamer Conjugated with a G-Quadruplex DNAzyme

Zearalenone (ZEN), one of the most frequently occurring mycotoxin contaminants in foods and feeds, poses considerable threat to human and animal health, owing to its acute and chronic toxicities. Thus, rapid and accurate detection of ZEN has attracted broad research interest. In this work, a novel and label-free chemiluminescence aptasensor based on a ZEN aptamer and a G-quadruplex DNAzyme was constructed. It was established on a competitive assay between ZEN and an auxiliary DNA for the aptamer, leading to activation of the G-quadruplex/hemin DNAzyme and subsequent signal amplification by chemiluminescence generation after substrate addition. To maximize the detection sensitivity, numerous key parameters including truncated aptamers were optimized with molecular docking analysis. Upon optimization, our aptasensor exhibited a perfect linear relationship (R² = 0.9996) for ZEN detection in a concentration range of 1-100 ng/mL (3.14-314.10 nM) within 40 min, achieving a detection limit of 2.85 ng/mL (8.95 nM), which was a 6.7-fold improvement over that before optimization. Most importantly, the aptasensor obtained a satisfactory recovery rate of 92.84-137.27% and 84.90-124.24% for ZEN-spiked wheat and maize samples, respectively. Overall, our label-free chemiluminescence aptasensor displayed simplicity, sensitivity, specificity and practicality in real samples, indicating high application prospects in the food supply chain for rapid detection of ZEN.

Capture-SELEX: Selection Strategy, Aptamer Identification, and Biosensing Application

Small-molecule contaminants, such as antibiotics, pesticides, and plasticizers, have emerged as one of the substances most detrimental to human health and the environment. Therefore, it is crucial to develop low-cost, user-friendly, and portable biosensors capable of rapidly detecting these contaminants. Antibodies have traditionally been used as biorecognition elements. However, aptamers have recently been applied as biorecognition elements in aptamer-based biosensors, also known as aptasensors. The systematic evolution of ligands by exponential enrichment (SELEX) is an in vitro technique used to generate aptamers that bind their targets with high affinity and specificity. Over the past decade, a modified SELEX method known as Capture-SELEX has been widely used to generate DNA or RNA aptamers that bind small molecules. In this review, we summarize the recent strategies used for Capture-SELEX, describe the methods commonly used for detecting and characterizing small-molecule-aptamer interactions, and discuss the development of aptamer-based biosensors for various applications. We also discuss the challenges of the Capture-SELEX platform and biosensor development and the possibilities for their future application.

Systematic bio-fabrication of aptamers and their applications in engineering biology

Aptamers are single-stranded DNA or RNA molecules that have high affinity and selectivity to bind to specific targets. Compared to antibodies, aptamers are easy to in vitro synthesize with low cost, and exhibit excellent thermal stability and programmability. With these features, aptamers have been widely used in biology and medicine-related fields. In the meantime, a variety of systematic evolution of ligands by exponential enrichment (SELEX) technologies have been developed to screen aptamers for various targets. According to the characteristics of targets, customizing appropriate SELEX technology and post-SELEX optimization helps to obtain ideal aptamers with high affinity and specificity. In this review, we first summarize the latest research on the systematic bio-fabrication of aptamers, including various SELEX technologies, post-SELEX optimization, and aptamer modification technology. These procedures not only help to gain the aptamer sequences but also provide insights into the relationship between structure and function of the aptamers. The latter provides a new perspective for the systems bio-fabrication of aptamers. Furthermore, on this basis, we review the applications of aptamers, particularly in the fields of engineering biology, including industrial biotechnology, medical and health engineering, and environmental and food safety monitoring. And the encountered challenges and prospects are discussed, providing an outlook for the future development of aptamers.

Inspirations of Biomimetic Affinity Ligands: A Review

Affinity chromatography is a well-known method dependent on molecular recognition and is used to purify biomolecules by mimicking the specific interactions between the biomolecules and their substrates. Enzyme substrates, cofactors, antigens, and inhibitors are generally utilized as bioligands in affinity chromatography. However, their cost, instability, and leakage problems are the main drawbacks of these bioligands. Biomimetic affinity ligands can recognize their target molecules with high selectivity. Their cost-effectiveness and chemical and biological stabilities make these antibody analogs favorable candidates for affinity chromatography applications. Biomimetics applies to nature and aims to develop nanodevices, processes, and nanomaterials. Today, biomimetics provides a design approach to the biomimetic affinity ligands with the aid of computational methods, rational design, and other approaches to meet the requirements of the bioligands and improve the downstream process. This review highlighted the recent trends in designing biomimetic affinity ligands and summarized their binding interactions with the target molecules with computational approaches.

Evanescent Wave Optical-Fiber Aptasensor for Rapid Detection of Zearalenone in Corn with Unprecedented Sensitivity

Zearalenone (ZEN) is a common mycotoxin pollutant found in agricultural products. Aptamers are attractive recognition biomolecules for the development of mycotoxin biosensors. Even though numerous aptasensors have been reported for the detection of ZEN in recent years, many of them suffer from problems including low sensitivity, low specificity, tedious experimental steps, high-cost, and difficulty of automation. We report here the first evanescent wave optical-fiber aptasensor for the detection of ZEN with unprecedented sensitivity, high specificity, low cost, and easy of automation. In our aptasensor, a 40-nt ZEN-specific aptamer (8Z₃₁) is covalently immobilized on the fiber. The 17-nt fluorophore Cy5.5-labeled complementary DNA strand and ZEN competitively bind with the aptamer immobilized on the fiber, enabling the signal-off fluorescent detection of ZEN. The coating of Tween 80 enhanced both the sensitivity and the reproducibility of the aptasensor. The sensor was able to detect ZEN spiked-in the corn flour extract with a semilog linear detection range of 10 pM-10 nM and a limit of detection (LOD, S/N = 3) of 18.4 ± 4.0 pM (equivalent to 29.3 ± 6.4 ng/kg). The LOD is more than 1000-fold lower than the maximum ZEN residue limits set by China (60 μg/kg) and EU (20 μg/kg). The sensor also has extremely high specificity and showed negligible cross-reactivity to other common mycotoxins. In addition, the sensor was able to be regenerated for 28 times, further decreasing its cost. Our sensor holds great potential for practical applications according to its multiple compelling features.

Effects of Nucleic Acid Structural Heterogeneity on the Electrochemistry of Tethered Redox Molecules

The cation condensation-induced collapse of electrode-bound nucleic acids and the resulting change in the electrochemical signal is a useful tool to predict the structure and redox probe location of heterogeneous structures of surface-tethered DNA probes─a common architecture employed in the development of electrochemical sensors. In this paper, we measure the faradaic current of an appended redox molecule at the 3' position of the nucleic acid using cyclic voltammetry before and after nucleic acid collapse for various nucleic acid architectures and heterogeneous mixtures on the same electrode surface. The voltammetric peak current change with collapse correlates with the proximity of the redox molecules from the surface. For stem-loop probes, the terminal methylene blue is initially held closer to the surface, such that inducing collapse, by reducing the dielectric permittivity of the interrogation solution, results in a ∼30% increase in current. However, when incorporating pseudoknot probes that hold methylene blue further away from the electrode surface, the current change is much larger (∼120%), indicating a larger conformation change. Upon a 50:50 ratio of the two, we observe a change in current that relates to the ratiometric distribution of the probe used to make the surfaces. Additionally, using cyclic voltammetry, we find that the change between diffusion-limited and diffusion-independent peak currents is dependent upon the distinct structural characteristics of DNA probes on the surface (stem-loop or pseudoknot), as well as the ratios of different DNA probes on the surface. Thus, we demonstrate that the heterogeneous nature of DNA probes governs the corresponding electrochemical signals, which can lead to a better understanding on how to predict the structures of functional nucleic acids on electrode surfaces and how this affects surface-to-surface variability and electrochemical response.

Recent advances in the highly sensitive determination of zearalenone residues in water and environmental resources with electrochemical biosensors

Zearalenone (ZEN), a significant class of mycotoxin which is considered as a xenoestrogen, permits, similar to natural estrogens, it's binding to the receptors of estrogen resulting in various reproductive diseases especially, hormonal misbalance. ZEN has toxic effects on human and animal health as a result of its teratogenicity, carcinogenicity, mutagenicity, nephrotoxicity, genotoxicity, and immunotoxicity. To ensure water and environmental resources safety, precise, rapid, sensitive, and reliable analytical and conventional methods can be progressed for the determination of toxins such as ZEN. Different selective nanomaterial-based compounds are used in conjunction with different analytical detection approaches to achieve this goal. The current review demonstrates the state-of-the-art advances of nanomaterial-based electrochemical sensing assays including various sensing, apta-sensing and, immunosensing studies to the highly sensitive determination of various ZEN families. At first, a concise study of the occurrence, structure, toxicity, legislations, and distribution of ZEN in monitoring has been performed. Then, different conventional and clinical techniques and procedures to sensitive and selective sensing techniques have been reviewed and the efficient comparison of them has been thoroughly discussed. This study has also summarized the salient features and the requirements for applying various sensing and biosensing platforms and diverse immobilization techniques in ZEN detection. Finally, we have defined the performance of several electrochemical sensors applying diverse recognition elements couples with nanomaterials fabricated using various recognition elements coupled with nanomaterials (metal NPs, metal oxide nanoparticles (NPs), graphene, and CNT) the issues limiting development, and the forthcoming tasks in successful construction with the applied nanomaterials.

Dual-Enzyme-Based Signal-Amplified Aptasensor for Zearalenone Detection by Using CRISPR-Cas12a and Nt.AlwI

Zearalenone (ZEN) is harmful to animals and human beings, so it is very important to develop a rapid and sensitive method for the detection of ZEN. In this paper, we proposed a novel ZEN-monitoring method using two aptamers as recognition elements and EnGen LbaCas12a and Nt.AlwI nicking endonuclease as signal amplifiers. When ZEN was present, it bound to the aptamer Z0 and, Z1 was released into solution. The solution was then separated and the Nt.AlwI enzyme was added in order to form a nicking-enzyme cycle, thereby producing large amounts of the ssDNA Z3 for 30 min. The Z3 formed a CRISPR-Cas12a-Z3 complex with CRISPR-Cas12a, activated the trans-cleavage ability of Cas12a, cleaved the Quenched Reporter for 20 min, and underwent fluorescence recovery. The aptasensor was able to sensitively detect ZEN in the linear range of 1–1000 pg/mL, with a detection limit as low as 0.213 pg/mL. The detection time lasted for 2 h. Additionally, this detection technology can also be used to monitor other hazards.

A label-free colorimetric aptasensor based on split aptamers-chitosan oligosaccharide-AuNPs nanocomposites for sensitive and selective detection of kanamycin

Herein, the split aptamers, chitosan oligosaccharide, and AuNPs were combined as nanocomposites that present different formations to develop a label-free colorimetric aptasensor for rapid detection of small molecules. Kanamycin was chosen as a model target. Computational studies were performed to assist in the design of orientated immobilization of the split aptamers onto the AuNPs surface. Chitosan oligosaccharide was initially applied as an aggregation inducer of AuNPs, and chitopentaose was screened as the optimal. Under optimized conditions, the proposed aptasensor showed high sensitivity and selectivity, with a limit of detection of 20.58 nM, a linear range of 25-800 nM, and good recoveries of 98.49-104.9% and 85.69-107.0% when employed to detect kanamycin in tap water and milk samples, respectively. Only 55 min was needed for the whole assay. More importantly, this study can serve as a novel and robust reference for the aptasensing detection of other small molecules.

Key criteria for engineering mycotoxin binding aptamers via computational simulations: Aflatoxin B1 as a case study

Due to the difficulties in monoclonal antibody production specific to mycotoxins, aptameric probes have been considered as suitable alternatives. The low efficiency of the SELEX procedure in screening high affinity aptamers for binding mycotoxins as small molecules can be significantly improved through computational techniques. Previously, we designed five new aptamers to aflatoxin B₁ (AFB1) based on a known aptamer sequence (Patent: PCT/CA2010/001 292, Apt1) through a genetic algorithm-based in silico maturation strategy and experimentally measured their affinity to the target toxin. Here, integrated molecular dynamic simulation (MDs) studies with molecular mechanics Poisson-Boltzmann surface area (MM-PBSA) analysis to clarify the binding modes, critical interacting nucleic bases and energy component contributions in the six AFB1-binding aptamers. The aptamer F20, which was selected in the first work, showed the best free binding energy and complex stability compared to other aptamers. The trajectory analysis revealed that AFB1 recognized F20 through the groove binding mode along with precise shape complementarity. The MD simulation results revealed that dynamic water intermediate interactions also play a key role in promoting complex stability. According to the MM-PBSA calculations, van der Waals contacts were identified as dominant energy components in all complexes. Interestingly, a high consistency is observed between the experimentally obtained binding affinities of the six aptamers with their free energy solvation. The computational findings, confirmed via previous experiments, highlighted the binding modes, the dynamic hydration of complex components and the total free interacting energy as the crucial criteria in discovering high functional aptameric probes.

Aptamer-based diagnostic and therapeutic approaches in animals: Current potential and challenges

Fast and precise diagnosis of infectious and non-infectious animal diseases and their targeted treatments are of utmost importance for their clinical management. The existing biochemical, serological and molecular methods of disease diagnosis need improvement in their specificity, sensitivity and cost and, are generally not amenable for being used as points-of-care (POC) device. Further, with dramatic changes in environment and farm management practices, one should also arm ourselves and prepare for emerging and re-emerging animal diseases such as cancer, prion diseases, COVID-19, influenza etc. Aptamer – oligonucleotide or short peptides that can specifically bind to target molecules – have increasingly become popular in developing biosensors for sensitive detection of analytes, pathogens (bacteria, virus, fungus, prions), drug residues, toxins and, cancerous cells. They have also been proven successful in the cellular delivery of drugs and targeted therapy of infectious diseases and physiological disorders. However, the in vivo application of aptamer-mediated biosensing and therapy in animals has been limited. This paper reviews the existing reports on the application of aptamer-based biosensors and targeted therapy in animals. It also dissects the various modifications to aptamers that were found to be successful in in vivo application of the aptamers in diagnostics and therapeutics. Finally, it also highlights major challenges and future directions in the application of aptamers in the field of veterinary medicine.

Investigation on electronic structure, vibrational spectra, NBO analysis, and molecular docking studies of aflatoxins and selected emerging mycotoxins against wild-type androgen receptor

The geometry, frontier molecular orbitals (FMOs), vibrational, NBO analysis, and molecular docking simulations of aflatoxins (B1, B2, M1, M2, G1, G2), zearalenone (ZEA) emodin (EMO), alternariol (AOH), alternariol monoethyl ether (AMME), and tenuazonic acid (TeA) mycotoxins have been extensively theoretically studied and discussed based on quantum density functional theory calculations using Gaussian 16 software package. The theoretical computation for the geometry optimization, NBOs, and the molecular docking interaction was conducted using Density Functional Theory with B3LYP/6-31+G(d,p), NBO program, and AutoDock Vina tools respectively. Charge delocalization patterns and second-order perturbation energies of the most interacting natural bond orbitals (NBOs) of these mycotoxins have also been computed and predicted. Interestingly, among the mycotoxins investigated, aflatoxin G1 is seen to give the strongest stabilization energy while Zearalenone shows the highest tendency to accept electron(s) and emodin, an emerging mycotoxin gave the best binding pose within the androgen receptor pocket with a mean binding affinity of -7.40 kcal/mol.

Aptasensors for mycotoxin detection: A review

Mycotoxins are toxic compounds produced by fungi, which represent a risk to the food and feed supply chain, having an impact on health and economies. A high percentage of feed samples have been reported to be contaminated with more than one type of mycotoxin. Systematic, cost-effective and simple tools for testing are critical to achieve a rapid and accurate screening of food and feed quality. In this review, we describe the various aptamers that have been selected against mycotoxins and their incorporation into optical and electrochemical aptasensors, outlining the strategies exploited, highlighting the advantages and disadvantages of each approach. The review also discusses the different materials used and the immobilization methods employed, with the aim of achieving the highest sensitivity and selectivity.

Capture-SELEX for aptamer selection: A short review

The emerging aptamer, developed through the systematic evolution of ligands by exponential enrichment (SELEX) process, has revolutionized and facilitated the discoveries in basic research. Among all SELEX technology, Capture-SELEX is a variant of the in vitro selection process, which is suitable for isolating aptamers against small molecules. Capture-SELEX library was developed to enable the immobilization of the oligonucleotides instead of the target molecules during the aptamer selection process. The review provides an update on the recent-advances in this new screening method with particular emphasis on key points of capture protocol and its applications. The limitations and the prospects of the Capture-SELEX are also discussed. We hope that present review will inspire more researchers to understand the selection problems from the perspective of Capture-SELEX. Moreover, it will open new pave to improve the efficiency and success of screening to meet the growing demand for aptasensor discovery in small molecules.

In silico approach for Post-SELEX DNA aptamers: A mini-review

Aptamers are short oligonucleotides that possess high specificity and affinity against their target. Generated via Systematic Evolution of Ligands by Exponential Enrichment, (SELEX) in vitro, they were screened and enriched. This review covering the study utilizing bioinformatics tools to analyze primary sequence, secondary and tertiary structure prediction, as well as docking simulation for various aptamers and their ligand interaction. Literature was pooled from Web of Science (WoS) and Scopus databases until December 18, 2020 using specific search string related to DNA aptamers, in silico, structure prediction, and docking simulation. Out of 330 published articles, 38 articles were assessed in the analysis based on the predefined inclusion and exclusion criteria. It was found that Mfold and RNA Composer web server is the most popular tool in secondary and tertiary structure prediction of DNA aptamers, respectively. Meanwhile, in docking simulation, ZDOCK and AutoDock are preferred to analyze binding interaction in the aptamer-ligand complex. This review reports a brief framework of recent developments of in silico approaches that provide predictive structural information of ssDNA aptamer.

Advances in Colorimetric Strategies for Mycotoxins Detection: Toward Rapid Industrial Monitoring

Mycotoxins contamination is a global public health concern. Therefore, highly sensitive and selective techniques are needed for their on-site monitoring. Several approaches are conceivable for mycotoxins analysis, among which colorimetric methods are the most attractive for commercialization purposes thanks to their visual read-out, easy operation, cost-effectiveness, and rapid response. This review covers the latest achievements in the last five years for the development of colorimetric methods specific to mycotoxins analysis, with a particular emphasis on their potential for large-scale applications in food industries. Gathering all types of (bio)receptors, main colorimetric methods are critically discussed, including enzyme-linked assays, lateral flow-assays, microfluidic devices, and homogenous in-solution strategies. This special focus on colorimetry as a versatile transduction method for mycotoxins analysis is comprehensively reviewed for the first time.

An In-Silico Pipeline for Rapid Screening of DNA Aptamers against Mycotoxins: The Case-Study of Fumonisin B1, Aflatoxin B1 and Ochratoxin A

Aptamers are single-stranded oligonucleotides selected by SELEX (Systematic Evolution of Ligands by EXponential Enrichment) able to discriminate target molecules with high affinity and specificity, even in the case of very closely related structures. Aptamers have been produced for several targets including small molecules like mycotoxins; however, the high affinity for their respective target molecules is a critical requirement. In the last decade, the screening through computational methods of aptamers for their affinity against specific targets has greatly increased and is becoming a commonly used procedure due to its convenience and low costs. This paper describes an in-silico approach for rapid screening of ten ssDNA aptamer sequences against fumonisin B1 (FB1, n = 3), aflatoxin B1 (AFB1, n = 2) and ochratoxin A (OTA, n = 5). Theoretical results were compared with those obtained by testing the same aptamers by fluorescent microscale thermophoresis and by magnetic beads assay for their binding affinity (KD) revealing a good agreement.

Recent advances in computational methods for biosensor design

Biosensors are analytical tools with a great application in healthcare, food quality control, and environmental monitoring. They are of considerable interest to be designed by using cost-effective and efficient approaches. Designing biosensors with improved functionality or application in new target detection has been converted to a fast-growing field of biomedicine and biotechnology branches. Experimental efforts have led to valuable successes in the field of biosensor design; however, some deficiencies restrict their utilization for this purpose. Computational design of biosensors is introduced as a promising key to eliminate the gap. A set of reliable structure prediction of the biosensor segments, their stability, and accurate descriptors of molecular interactions are required to computationally design biosensors. In this review, we provide a comprehensive insight into the progress of computational methods to guide the design and development of biosensors, including molecular dynamics simulation, quantum mechanics calculations, molecular docking, virtual screening, and a combination of them as the hybrid methodologies. By relying on the recent advances in the computational methods, an opportunity emerged for them to be complementary or an alternative to the experimental methods in the field of biosensor design.

In silico molecular docking in DNA aptamer development

Aptamers are single-stranded DNA or RNA oligonucleotides generated by SELEX that exhibit binding affinity and specificity against a wide variety of target molecules. Compared to RNA aptamers, DNA aptamers are much more stable and therefore are widely adopted in a number of applications especially in diagnostics. The tediousness and rigor associated with certain steps of the SELEX intensify the efforts to adopt in silico molecular docking approaches together with in vitro SELEX procedures in developing DNA aptamers. Inspired by these endeavors, we carry out an overview of the in silico molecular docking approaches in DNA aptamer generation, by detailing the stepwise procedures as well as shedding some light on the various softwares used. The in silico maturation strategy and the limitations of the in silico approaches are also underscored.

Structure-switching fluorescence aptasensor for sensitive detection of chloramphenicol

The performance of chloramphenicol aptamer, including binding thermodynamics, structure switching, and binding domain, was investigated by isothermal titration calorimetry, circular dichroism, and molecular docking. Then, a new fluorescence aptasensor was developed with signal amplification mediated by exonuclease I-catalyzed reaction and hybridization chain reaction (HCR) for chloramphenicol detection. In this system, the aptamer-binding domain is blocked by the initiator of HCR, the aptamer undergoes structure switching in the presence of chloramphenicol, and DNA dissociation occurs. The released aptamer is subsequently recognized and cleaved by Exo I to set free chloramphenicol. With the Exo I-assisted chloramphenicol recycling, an increasing number of initiators were exposed from the digestion of the initiator-aptamer complex. Then, the chain-like assembly of FAM labeled H1 and H2 through HCR was triggered by the initiator, generating a long DNA polymer. Under optimum conditions, the aptasensor exhibited a log-linear range from 0.001 to 100 nM of chloramphenicol and a detection limit of 0.3 pM. Additionally, the designed biosensing platform was applied to determine chloramphenicol in milk and lake water with high accuracy. The current approach provides a new avenue to develop sensitive aptasensors with the assistance of binding mechanism between aptamer and target compounds. Graphical abstract.

Detection Strategies of Zearalenone for Food Safety: A Review

Zearalenone (ZEN) is a toxic compound produced by the metabolism of fungi (genus Fusarium) that threaten the food and agricultural industry belonging to the in foods and feeds. ZEN has toxic effects on human and animal health due to its mutagenicity, teratogenicity, carcinogenicity, nephrotoxicity, immunotoxicity, and genotoxicity. To ensure food safety, rapid, precise, and reliable analytical methods can be developed for the detection of toxins such as ZEN. Different selective molecular diagnostic elements are used in conjunction with different detection strategies to achieve this goal. In this review, the use of electrochemical, colorimetric, fluorometric, refractometric as well as other strategies were discussed for ZEN detection. The success of the sensors in analytical performance depends on the development of receptors with increased affinity to the target. This requirement has been met with different immunoassays, aptamer-assays, and molecular imprinting techniques. The immobilization techniques and analysis strategies developed with the combination of nanomaterials provided high precision, reliability, and convenience in ZEN detection, in which electrochemical strategies perform the best.

Electrochemical determination of zearalenone using a label-free competitive aptasensor

An electrochemical aptasensor is described for determination of the phytohormone of zearalenone (ZEA). The gold electrode was modified with ZEA via covalent attachment using cysteamine-hydrochloride and 1,4-phenylene diisocyanate linker. A truncated ZEA aptamer with a dissociation constant of 13.4 ± 2.1 nM was used in an aptasensor. The electrochemical property was investigated using square wave voltammetry for monitoring the change in the electron transfer using the ferro/ferricyanide system as redox probe. Under optimal experimental conditions, the response was best measured at a potential of 0.20 V (vs. Ag/AgCl). The signals depended on the competitive mechanism between the immobilised ZEA and free ZEA for the aptamer binding site. The aptasensor works in the range 0.01 to 1000 ng·mL^-1 ZEA concentration, with a detection limit of 0.017 ng·mL^-1. High degree of cross-reactivity with the other analogues of ZEA was observed, whereas none towards other mycotoxins. The aptasensor was further applied for the determination of ZEA in the extract of maize grain and showed good recovery percentages between 87 and 110%. Graphical abstract Schematic representation of the electrochemical determination of zearalenone based on indirect competitive assay. Step a Immobilisation of ZEA on the surface of gold electrode via covalent attachment, b competition for the ZEA aptamer binding site between immobilised and free ZEA, and c current signal of the binding event based on SWV technique.

High affinity truncated aptamers for ultra-sensitive colorimetric detection of bisphenol A with label-free aptasensor

The widespread exposure of bisphenol A (BPA) presents a significant risk to human health. A rapid, ultra-sensitive and label-free colorimetric aptasensor using high affinity truncated aptamers was developed for BPA detection. Truncated 38-mer and 12-mer aptamers specific for BPA were obtained through rationally truncation from 63-mer BPA aptamer. The dissociation constants (K_d) of 38-mer and 12-mer aptamers were determined to be 13.17 nM and 27.05 nM. Then, truncated aptamers were used in label-free colorimetric detection assays based on gold nanoparticles (AuNPs). The limit of detections of aptasensors using 38-mer and 12-mer aptamers were 7.60 pM and 14.41 pM, which were 265-fold and 140-fold lower than that of the aptasensor using 63-mer aptamer, respectively. The recovery rates in milk, orange juice and mineralized water samples were 93.88% to 107.30%. Therefore, the developed BPA colorimetric aptasensor using truncated aptamers has great application prospects in food safety control and environmental monitoring.

Graphene-Based Steganographic Aptasensor for Information Computing and Monitoring Toxins of Biofilm in Food

Fungi-forming biofilm would produce various toxins in food. The toxin contamination will cause great harm to food and human health. Herein, a novel graphene-based steganographic aptasensor was assembled for multifunctional applications, which depended on the specific recognition and information encoding ability of DNA aptamers [mycotoxins, including zearalenone (ZEN) and ochratoxin A (OTA) aptamers, as models] and the selective absorption and fluorescence quenching capacities of graphene oxide (GO). The graphene-based steganographic aptasensor can be regarded as an information encryption and steganographic system using GO as a cover, aptamers for specific target recognition as information carriers and dual targets (ZEN and OTA) as special keys. In our work, the fluorescence of capture probes (Cy3 aptamer and Alexa Fluor 488 aptamer) was quenched by GO to realize information encryption. In the presence of dual targets in the GO-APT solution, Cy3 aptamer (APT1), and Alexa Fluor 488 aptamer (APT2) were released from the surface of GO, decrypting the hidden information. In addition, our work offers a sensor for rapid and sensitive simultaneous fluorescence determination of ZEN and OTA. The detection limit of the aptasensor was 1.797 ng/ml for ZEN and 1.484 ng/ml for OTA. In addition, the graphene-based steganographic aptasensor can be used to construct a molecular logic gate system in which GO, aptamers, and mycotoxins are employed as the input and compounds and fluorescence signals were used as the output. This would be helpful to control the biofilm toxin in the future.

Colorimetric Aptasensor Based on Truncated Aptamer and Trivalent DNAzyme for Vibrio parahemolyticus Determination

In this work, after optimizing the original aptamer sequence by truncation and site-directed mutagenesis, a simple and sensitive colorimetric aptasensor was established for detecting the widespread food-borne pathogen Vibrio parahemolyticus ( V. parahemolyticus). The detection strategy was based on the competition for an V. parahemolyticus specific aptamer between its complementary DNA (cDNA) and V. parahemolyticus. The aptamer-conjugated magnetic nanoparticles (MNPs) were used as capture probes, and the G-quadruplex (G4) DNAzyme was employed as the signal amplifying element. Under optimal conditions, a wide linear detection range (from 10² to 10⁷ cfu/mL) was available, and the detection limit could be as low as 10 cfu/mL. This method was also used to detect V. parahemolyticus in contaminated salmon samples, and the results showed good consistency with those obtained from standard plate counting method. Therefore, this novel aptasensor could be a good candidate for sensitive and selective detection of V. parahemolyticus without complicated operations.