Influence of Nontoxic Magnetic Cellulose Nanofibers on Chitosan Based Edible Nanocoating: A Candidate for Improved Mechanical, Thermal, Optical, and Texture Properties

Bakuchiol nanoemulsion loaded electrospun nanofibers for the treatment of burn wounds

The present work aims to develop and evaluate the wound healing potential of bakuchiol nanoemulsion loaded electrospun scaffolds. Since oxidative stress and microbial burden leads the burn wounds to become chronic and fatal to patients, a phytoconstituent, bakuchiol (BAK), was screened on the basis of antioxidant and antimicrobial potential which also defined its dose. Furthermore, BAK was incorporated into a nanoemulsion to enhance its therapeutic efficacy, reduce its dosage frequency, and maximize its stability. The present study is inclined towards the collaborative interaction of natural products and novel drug delivery systems to develop safe and therapeutically efficient systems for burn wound healing. The optimized nanoemulsion showed excellent antioxidant and antimicrobial potential against wound susceptible pathogens, i.e., Candida albicans and Methicillin-resistant Staphylococcus aureus which was further loaded into gelatin based hydrogel and nanofibrous scaffold system. The mesh structure of scaffolds was chosen as a suitable carrier system for wound healing process not only because it offers resemblance to skin's anatomy but is also capable of providing uniform distribution of wound biomarkers across the skin. The prepared nanofibers were assessed for their analgesic, anti-inflammatory, and wound healing potential which was observed to be significantly better than its gel formulation.

A crosslinked and percolation network alginate coating for litchi prevention

The short shelf life of Litchi is due to its rapid metabolism after being harvested. Refrigeration is not a suitable method for preserving litchi, as the browning process of litchi that has been cryogenic will accelerate when it is brought to room temperature. This study introduces an alginate-based coating as a solution to control the post-harvest metabolism of litchi. The coating achieves this by simultaneously establishing crosslink and percolation networks, both of which act as barriers. The percolation network is created using rod-like cellulose nanocrystals, which possess excellent percolation properties. This network effectively reduces moisture loss. Compared to the control group, the coated litchi exhibited a 38.1 % lower browning index and a 62.5 % lower decay rate. Additionally, the soluble solid content increased by 107.1 %. The inclusion of cellulose nanocrystals and the crosslinking of calcium ions enhanced the mechanical properties of the composite membrane. Specifically, the tensile strength and elongation at break increased by 70 % and 366 % respectively. As all the components in the coating are edible, it is environmentally friendly and safe for human consumption.

Development of antifogging double-layer film using cellulose nanofibers and carboxymethyl chitosan for white Hypsizygus marmoreus preservation

Films with simultaneously excellent mechanical and anti-fog properties are of great importance for food packaging. A novel strategy is described here to prepare long-lasting anti-fog film with antibacterial and antioxidant capabilities via a simple, green approach. The CMC (carboxymethyl chitosan) gel was integrated with CNF/TA (cellulose nanofibers/tannic acid) composite solution based on layer-by-layer assembly to form a membrane with a bilayer structure. The anti-fog performance of the bilayer film could be adjusted by regulating the CNF/TA layer thickness. On the whole, the developed anti-fog film had high mechanical strength and excellent UV shielding properties, as well as good antibacterial and antioxidant properties, and could be non-fogging for a long time under water vapor (40 °C). The effect of double layer anti-fog film (3%CmFT-3) on the fresh-keeping effect of white Hypsizygus marmoreus was compared at room temperature (28 °C) with commercially available anti-fog PVC film. The results showed that the bilayer anti-fog film could effectively prevent the generation of fog, delay the Browning, inhibit mildew, improve the overall acceptability, and effectively extend the shelf life of white Hypsizygus marmoreus. This biomass-based anti-fog film offers great potential for the development of multifunctional green food packaging.

Valorization of wheat straw in food packaging: A source of cellulose

Wheat straw (WS) is one of the abundant categories of agricultural waste, which is usually abandoned and burned yearly, thus creating environmental issues. Traditionally, it is used for low-value purposes, mainly in cattle feeding or agricultural mulch, and the rest is burnt or thrown away. WS is a valuable candidate as raw material for being used as reinforcing fibers to fabricate biocomposites. Among existing strategies, one of the potential strategies to utilize such lignocellulosic biomasses includes the extraction of cellulose as a potential candidate in the fabrication of sustainable packaging. Exploring WS as a valuable source of cellulose could be a key strategy for enabling biopolymers in packaging, which relies on developing tailor-made materials from non-food and low-cost resources. In this regard, the valorization of WSs for packaging can add value to these underutilized residues and successfully contribute to the circular economy concept. The review addresses the valorization of WS as a source of cellulose and its nanostructured forms for food packaging applications. The review also discusses cellulose derivatives extraction using conventional or innovative techniques (microwave-assisted extraction, fractionation, mechanical fibrillation, steam-explosion, microfludization, enzymatic hydrolysis, etc.). The different applications of these extracted biopolymers in the packaging are also summarized.

Using celluloses in different geometries to reinforce collagen-based composites: Effect of cellulose concentration

Cellulose is frequently used to strengthen biocomposite films, but few literature systematically deliberates the effects of concentration of celluloses in different geometries on the reinforcement of these composites. Here we prepared three types of celluloses, including rod-like cellulose nanocrystalline (CNC), long-chain cellulose nanofiber (CNF) and microscopic cellulosic fines (CF). The effect of concentration of the three celluloses was examined on the barrier properties to water and light, thermostability, microstructure, and mechanical properties of collagen (COL) films. The addition of celluloses increased the watertightness and thermostability of composite films. Besides, FTIR showed a increased hydrogen bonding for COL/CNF and COL/CNC composite films, but decrease for COL/CF composites. As the concentration of CF and CNF increased, the strength of composites improved. The TS for COL/CNF (124 MPa) and COL/CF composites (113 MPa) were largely increased, compared with that of collagen ones (90 MPa). Considering the factors of crystallinity, hydrogen bonding, and interfacial tortuosity, COL/CNF composites possessed better mechanical behaviors than that of COL/CF and COL/CNC composites. Furthermore, Halpin-Kardos and Ouali models well predicted the modulus of COL/CNF composites when CNF was below and above percolation threshold (2.7 wt%), respectively.

Nanochitosan functionalized hydrophobic starch/guar gum biocomposite for edible coating application with improved optical, thermal, mechanical, and surface property

The current work demonstrates a unique approach of utilizing nanochitosan (NCS) based edible nanomodifier for functionalizing starch (ST)/guar gum (GG) biocomposite with superior packaging properties targeting stringent edible food packaging on fresh cuts. The effectiveness of NCS in terms of structure-property-performance analysis of ST/GG biocomposites was done. The inclusion of NCS to the biocomposites of ST/GG converts its hydrophilic surface nature to hydrophobic (contact angle of ~114°) by modifying the surface features. The addition of NCS improved the thermal stability, where the observed 10% weight degradation of ST biocomposites were ~79.36, ~80.49, and ~186.89 °C for neat ST, ST/GG biocomposites, and ST/GG/NCS (3% w/v) (ST-GG-NCS3), respectively. The observed transparency of ST, ST-GG, and ST-GG-NCS3 were 21, 8, and 48%, respectively in the visible region suggesting consumer preference for transparent packaging materials. The wt% of O, C and N elements in ST-GG-NCS3 as observed by EDX spectra were ~ 50.2, ~47.6, and ~ 2.2%, respectively, which confirm the safety of the materials. Additionally, it is noteworthy to mention that the storage quality in terms of microbial growth, pH change, color attributes, and weight loss are better preserved when used as an edible coating on cut apple fruits.

Development of antioxidant-rich edible active films and coatings incorporated with de-oiled ethanolic green algae extract: a candidate for prolonging the shelf life of fresh produce

The concept of sustainability and the substitution of non-biodegradable packaging using biodegradable packaging has attracted gigantic interest. The objective of the present study was to revalorize the biowaste "de-oiled green algae biomass (DAB)" of Dunaliella tertiolecta using a green approach and the development of biodegradable chitosan (CS)-based edible active biocomposite films and coatings for prolonging the shelf life of fresh produce. Ultrasound-assisted green extraction was conducted using food-grade solvent ethanol for obtaining the bio-actives, namely "crude algae ethanolic extract (CAEE)" from DAB. The edible films (CS/CAEE) and coating solutions were developed by incorporating CAEE with varying concentrations (0 to 28%). The CAEE was subjected to MALDI-TOF-MS, NMR, and other biochemical analyses, and was found to be rich in DPPH antioxidant activity (∼40%). The CS/CAEE films were fabricated using a solvent casting method and characterized by several biochemical and physicochemical (FESEM, TGA, FTIR, XRD, WVP, UTM, and rheological) characterization techniques. The addition of CAEE into the CS matrix reduced the maximum film transparency (∼20%), water vapor permeability (∼60%); improved the crystallinity (∼24%), tensile strength (∼25%), and antioxidant activity (∼27%); and exhibited UV-Vis blocking properties as compared to the control film. Besides, the developed coating solutions and CAEE showed biocompatibility with BHK-21 fibroblast cells and antimicrobial activity against common food pathogens. The developed coating solution was applied on green chilli using a dipping method and stored at ambient temperature (25 ± 2 °C, 50-70 % RH) for 10 days. The shelf life of chillies was extended without altering the quality as compared to uncoated green chillies. Therefore, the formulated coating could be applicable for prolonging the shelf life of fresh produce.

A Review on Biodegradable Packaging Films from Vegetative and Food Waste

Plastics around the globe have been a matter of grave concern due to the unavoidable habits of human mankind. Taking waste statistics in India for the year 2019-20 into account, the data of 60 major cities show that the generation of plastic waste stands tall at around 26,000 tonnes/day, of which only about 60 % is recycled. A majority of the non-recycled plastic waste is petrochemical-based packaging materials that are non-biodegradable in nature. Vegetative/food waste is another global issue, evidenced by vastly populated countries such as China and India accounting for 91 and 69 tonnes of food wastage, respectively in 2019. The mitigation of plastic packaging issues has led to key scientific developments, one of which is biodegradable materials. However, there is a way that these two waste-related issues can be fronted as the analogy of "taking two shots with the same arrow". The presence of various bio-compounds such as proteins, cellulose, starch, lipids, and waxes, etc., in food and vegetative waste, creates an opportunity for the development of biodegradable packaging films. Although these flexible packaging films have limitations in terms of mechanical, permeation, and moisture absorption characteristics, they can be fine-tuned in order to convert the biobased raw material into a realizable packaging product. These strategies could work in replacing petrochemical-based non-biodegradable packaging plastics which are used in enormous quantities for various household and commercial packaging applications to combat the ever-increasing pollution in highly populated countries. This paper presents a systematic review based on modern scientific tools of the literature available with a major emphasis on the past decade and aims to serve as a standard resource for the development of biodegradable packaging films from food/vegetative waste.

Potential of engineered nanostructured biopolymer based coatings for perishable fruits with Coronavirus safety perspectives

Fresh fruits are prioritized needs in order to fulfill the required health benefits for human beings. However, some essential fruits are highly perishable with very short shelf-life during storage because of microbial growth and infections. Thus improvement of fruits shelf-life is a serious concern for their proper utlization without generation of huge amount of fruit-waste. Among various methods employed in extension of fruits shelf-life, design and fabrication of edible nanocoatings with antimicrobial activities have attracted considerable interest because of their enormous potential, novel functions, eco-friendly nature and good durability. In recent years, scientific communities have payed increased attention in the development of advanced antimicrobial edible coatings to prolong the postharvest shelf-life of fruits using hydrocolloids. In this review, we attempted to highlight the technical breakthrough and recent advancements in development of edible fruit coating by the application of various types of agro-industrial residues and different active nanomaterials incorporated into the coatings and their effects on shelf-life of perishable fruits. Improvements in highly desired functions such as antioxidant/antimicrobial activities and mechanical properties of edible coating to significantly control the gases (O₂/CO₂) permeation by the incorporation of nanoscale natural materials as well as metal nanoparticles are reviewed and discussed. In addition, by compiling recent knowledge, advantages of coatings on fruits for nutritional security during COVID-19 pandemic are also summarized along with the scientific challenges and insights for future developments in fabrication of engineered nanocoatings.

Latest Developments in Edible Coatings on Minimally Processed Fruits and Vegetables: A Review

The food industry nowadays is facing new challenges in terms of sustainability and health implications of packaging and processing techniques. Due to their desire for new and natural products coupled with changes in lifestyle, consumers are looking for food products that have been less processed but possess longer shelf life and maintain nutritional and sensorial proprieties during storage. These requirements represent real challenges when dealing with highly perishable food products, such as fruits and vegetables. Thus, in recent years, edible coatings have been intensively developed and studied because of their capacity to improve the quality, shelf life, safety, and functionality of the treated products. Edible coatings can be applied through different techniques, like dipping, spraying, or coating, in order to control moisture transfer, gas exchange, or oxidative processes. Furthermore, some functional ingredients can be incorporated into an edible matrix and applied on the surface of foods, thus enhancing safety or even nutritional and sensory attributes. In the case of coated fruits and vegetables, their quality parameters, such as color, firmness, microbial load, decay ratio, weight loss, sensorial attributes, and nutritional parameters, which are very specific to the type of products and their storage conditions, should be carefully monitored. This review attempts to summarize recent studies of different edible coatings (polysaccharides, proteins, lipids, and composites) as carriers of functional ingredients (antimicrobials, texture enhancers, and nutraceuticals) applied on different minimally processed fruits and vegetables, highlighting the coating ingredients, the application methods and the effects on food shelf life and quality.

Curcumin doped functionalized cellulose nanofibers based edible chitosan coating on kiwifruits

The developed edible coating with curcumin facilitated iron functionalized cellulose nanofiber (f-CNF) reinforced chitosan (CS) were applied on kiwifruits for maintaining the quality during storage life. The f-CNF was fabricated via anchoring iron particles onto the surface of CNF as evident by FESEM, FETEM, and XRD analysis. The inclusion of f-CNF and curcumin as a component of edible coating can provide a synergistic effect in maintaining the quality of kiwifruits. The f-CNF (1.5 wt%) dispersed CS edible coating assisted by curcumin provided a lamellar and heterogonous surface morphology with a hazy appearance. The used edible coating materials were effective in reducing mass loss, firmness loss, respiration rate, and microbial count of the kiwifruits during storage life (10 days at 10 °C). Additionally, color, and physiological properties of kiwifruits can be modified by using the addressed edible coating materials.

Silk nanodisc based edible chitosan nanocomposite coating for fresh produces: A candidate with superior thermal, hydrophobic, optical, mechanical and food properties

This paper demonstrates the fabrication of silk nanodisc (SND) dispersed chitosan (CS) based new edible coating as a candidate for superior thermal, hydrophobic, optical, mechanical, and physicochemical properties, which further provide remarkable storage quality for banana fruits. Fabrication of SND is attained following acid hydrolysis of silk fibroin (SF), where the successful nanostructures formulations are analyzed by FESEM, FETEM and XRD analysis delivering disc shaped morphology with amplified crystallinity (~95.0%). The SF has been fabricated from waste muga cocoons using the degumming process. The superior thermal stability of SND compared to SF portray a new era in required heat resistant packaging. The effectiveness of SND is investigated on packaging properties of CS biocomposites including thermal, wettability, mechanical, color, surface morphology, and others. Wettability of SND incorporated CS biocomposite enhanced by ~ 10° suggesting improved hydrophobicity. The edible coatings are a new candidate to improve the shelf life of bananas over 7 days at 25 °C for prevailing original weight, optical property, firmness, and others.

Cellulose supported magnetic nanohybrids: Synthesis, physicomagnetic properties and biomedical applications-A review

Cellulose and its forms are widely used in biomedical applications due to their biocompatibility, biodegradability and lack of cytotoxicity. It provides ample opportunities for the functionalization of supported magnetic nanohybrids (CSMNs). Because of the abundance of surface hydroxyl groups, they are surface tunable in either homogeneous or heterogeneous solvents and thus act as a substrate or template for the CSMNs' development. The present review emphasizes on the synthesis of various CSMNs, their physicomagnetic properties, and potential applications such as stimuli-responsive drug delivery systems, MRI, enzyme encapsulation, nucleic acid extraction, wound healing and tissue engineering. The impact of CSMNs on cytotoxicity, magnetic hyperthermia, and folate-conjugates is highlighted in particular, based on their structures, cell viability, and stability. Finally, the review also discussed the challenges and prospects of CSMNs' development. This review is expected to provide CSMNs' development roadmap in the context of 21st-century demands for biomedical therapeutics.

Sustainable nanocomposite films based on SiO2 and biodegradable poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBH) for food packaging

Sustainable nanocomposites with transparent, biodegradable, and enhanced mechanical and barrier properties were prepared by the incorporation of SiO2 into poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBH) films and subsequent solvent casting. The crystallinity of composites could be increased by 67% with appropriate contents of SiO2, which proved that SiO2 were effective nucleating agents for PHBH. And it was worth mentioning that the contributions of SiO2 to the crystallization and thermal stability of composites are proved effectively by Avrami relationship and Horowitz and Metzger method. More importantly, compared with PHBH, it had not only an enhancement about 40% and 60% on the tensile strength and elastic modulus, respectively, but also half the reduction of the moisture and oxygen permeability which were much higher than the values of conventional plastics. The above, in conjunction with the low migration rate measured in food substitutes, illustrated unambiguously that the nanocomposites might be suitable for potential application in food packaging.

Essential Oil Based PVP-CMC-BC-GG Functional Hydrogel Sachet for 'Cheese': Its Shelf Life Confirmed with Anthocyanin (Isolated from Red Cabbage) Bio Stickers

‘Gouda cheese’ is one of the most popular varieties of cheese eaten worldwide. The preservation problem of gouda arises due to microbial contamination and infestation. Therefore, essential oil (EO) based PVP-CMC-BC-GG hydrogel film was prepared to solve the problem and to extend the shelf-life of ‘Gouda cheese’. Anthocyanin (isolated from red cabbage) based pH stickers are integrated into the packaging system to recognize the spoilage of ‘cheese’. EOs (clove and/or cinnamon) are added to PVP-CMC-BC-GG hydrogel film to improve its antimicrobial, physical, mechanical, and thermal properties as well as shelf-life of cheese. The films are assessed based on their physical, structural, and functional properties, real-time assessment on cheese, and biodegradability. The results revealed that although the addition of oils to the PVP-CMC-BC-GG hydrogel films enhanced its mechanical, hydrophobic, and antimicrobial properties, the biodegradability of PVP-CMC-BC-GG films declined with the addition of EOs. The thermal properties remained the same irrespective of the addition of EOs. The shelf life of cheese was extended for more than 10–12 days, inside the PVP-CMC-BC-GG hydrogel sachet compared to the conventional PE packaging system. Hence the use of the PVP-CMC-BC-GG sachet (containing EO or without EO) is recommended for cheese packaging along with the use of PVP-CMC-BC-GG anthocyanin bio stickers for monitoring the quality of cheese.

Hyperbranched Polymers in Modifying Natural Plant Fibers and Their Applications in Polymer Matrix Composites-A Review

Natural plant fibers have been widely used in the agricultural and forest industries, and even in the automobile industry, especially for producing fiber reinforced polymer matrix composites. However, the low mechanical properties of composites remain the key problem in the applications. A hyperbranched polymer has lots of advantages such as low viscosity, high reactivity, and so on. Multireactive end groups of hyperbranched polymers are ideal for modifying natural plant fibers to achieve better interface bonding between a fiber and resin matrix. This manuscript reviews some research advances in hyperbranched-polymer-modified natural plant fibers and summarizes the applications of the modified fibers in polymer matrix composites with a particular focus on the chemical modification of fibers and interface bonding.