Preparation of a Near-Infrared Fluorescent Probe Based on IR-780 for Highly Selective and Sensitive Detection of Bisulfite-Sulfite in Food, Living Cells, and Mice

A near-infrared AIE fluorescent probe for accurate detection of sulfur dioxide derivatives and visualization of fingerprints

In most biophysiological processes, sulfur dioxide (SO2) is an important intracellular signaling molecule that plays an important role. The change of SO2 in cells are closely related to various diseases such as neurological disorders and lung cancer, so it is necessary to develop fluorescent probes with the ability to accurately detect SO2 during physiological processes. In this work, we designed and synthesized a multifunctional fluorescent probe TIS. TIS has excellent properties such as near-infrared emission, large stokes shift, excellent SO2 detection capabilities, low detection limit, high specificity and visualization of color change before and after reaction. Simultaneously, TIS has low cytotoxicity, good biocompatibility, clear cell imaging capability and mitochondrial targeting ability. In addition, the ability of TIS to be applied to different material surfaces for latent fingerprint fluorescence imaging was also explored. TIS provides an excellent method for the accurate detection of SO2 derivatives and shows great potential applications in near-infrared cellular imaging and latent fingerprint fluorescence imaging.

A near infrared fluorescence probe with dual-site for hydrogen sulfide and sulfur dioxide detection

Both hydrogen sulfide (H2S) and sulfur dioxide (SO2) are regarded as double-edged swords. They are toxic gases at high concentration, and at low concentration they are beneficial to the human. Therefore, it is of great significance to develop single chemosensor which enable to detect them with different fluorescence signal changes. In this work, a novel dual-site fluorescence probe (AMN-SSPy) with near infrared emission (675 nm) was designed, which realized quantitative detection for H2S and SO2 by fluorescence enhancement and fluorescence quenching, respectively. AMN-SSPy showed advantages such as excellent selectivity to H2S and SO2, strong anti-interference ability, high sensitivity for H2S (LOD 1.03 µM for H2S and 77.08 µM for SO2) and low toxicity. In addition, AMN-SSPy possessed the capacity to successfully image the endogenous and exogenous H2S, and it was also used to demonstrate that Ca2+ could induce accumulation of H2S in cell and zebrafish. Finally, the rapid detection of SO2 by AMN-SSPy in real samples was also established.

Structure-regulated mitochondrial-targeted fluorescent probe for sensing and imaging SO2in vivo

SO2 and its derivatives play an important role in the antioxidation and anticorrosion of food and medicine. In biological systems, abnormal levels of SO2 lead to the occurrence of many biological diseases. Hence, the development of suitable tools for monitoring SO2 in mitochondria is beneficial for studying the biological effect of SO2 in subcellular organelles. In this research, DHX-1 and DHX-2 are fluorescent probes designed on the basis of dihydroxanthene skeletons. Importantly, DHX-1 (650 nm) and DHX-2 (748 nm) show near-infrared fluorescence response toward endogenous and exogenous SO2, which showed advantages of great selectivity, good sensitivity and low cytotoxicity, and the detection limit is 5.6 μM and 4.08 μM of SO2, respectively. Moreover, DHX-1 and DHX-2 realized SO2 sensing in HeLa cells and zebrafish. Moreover, cell imaging demonstrated that DHX-2 with a thiazole salt structure possesses good mitochondria-targeting ability. Additionally, DHX-2 was perfectly achieved by in situ imaging of SO2 in mice.

Universal Near-Infrared Fluorescent Nanoprobes for Detection and Real-Time Imaging of ATP in Real Food Samples, Living Cells, and Bacteria

Adenosine triphosphate (ATP), an essential metabolite for active microorganisms to maintain life activities, has been widely regarded as a marker of cell activity and an indicator of microbial contamination. Herein, we designed two near-infrared (NIR) fluorescent nanoprobes named CYA@ZIF-90 and CYQ@ZIF-90 by encapsulating the NIR dye CYA/CYQ in ZIF-90 for the rapid detection of ATP. Between them, nanoprobe CYA@ZIF-90 can achieve higher NIR emission (702 nm) and rapid detection (2 min). Based on the superior spatiotemporal resolution imaging of ATP fluctuations in living cells, the applicability of CYA@ZIF-90 for imaging and detection of ATP in living bacteria was explored for the first time. The nanoprobe indirectly realizes the quantitative detection of bacteria, and the detection limit can be as low as 74 CFU mL-1. Therefore, the prepared nanoprobe is expected to become a universal ATP sensing detection tool, which can be further applied to evaluate cell apoptosis, cell proliferation, and food-harmful microbial control.

Visual inspection of acidic pH and bisulfite in white wine using a colorimetric and fluorescent probe

The acidic pH and total amount of SO₂ are both important quality control indexes of wine, but conventional detection techniques depend heavily on specialized instrument and professional staff, thus are not available to general customers. In this paper, a hemicyanine-based colorimetric and fluorescent probe Hcy-Py was designed and synthesized. It responded to bisulfite selectively with a LOD of 0.68 μM and responded to proton with a pKa of 3.78. Upon the treatment of solutions with different pH values and concentrations of bisulfite, the probe-loaded paper strips displayed distinct color changes under both natural light and UV lamp. When a real white wine sample was subjected to the paper strip experiment, pH as well as bisulfite concentration could be determined by naked-eye quickly and conveniently, thus a visual detection of acidic pH and bisulfite in white wine without involving any sophisticated instrument or professional skill was successfully demonstrated.

A red fluorescence probe for reversible detection of HSO3-/H2O2 and its application in food samples and bioimaging

Reducing agent SO₂ and oxidant H₂O₂ are two essential substances in cells, and the balance between them is closely related to the survival of cells. SO₂ derivative HSO₃^- is often used as food additive. Therefore, simultaneous detection of SO₂ and H₂O₂ is of great significance in biology and food safety. In this work, we successfully developed a mitochondria-targeted red fluorescent probe (HBTI), which has excellent selectivity, high sensitivity and large Stokes shift (202 nm). HBTI and HSO₃^-/SO₃^2- undergo Michael addition on the unsaturated C=C bond, and the addition product (HBTI-HSO₃^-) can react with H₂O₂ to restore the conjugated structure. Fluorescence changes from red to non-emissive and then restores to red, and can be detected quickly and visually. In addition, HBTI has been successfully targeted mitochondria, and achieved dynamic reversible response to SO₂/H₂O₂ in living cells, and has been successfully applied to detect SO₂ in food samples.

A near-infrared fluorescent probe for imaging of bisulfite in living animals and its application in food samples

Bisulfite (HSO₃^-) has been widely used as an antioxidant, enzyme inhibitor and antimicrobial agent in foodstuffs, pharmaceutical and beverages industries. It is also a signaling molecular in the cardiovascular and cerebrovascular systems. Nevertheless, a high level of HSO₃^- can cause allergic reactions and asthmatic attacks. Accordingly, the monitoring of HSO₃^- levels possesses momentous significance from the perspectives of biological technology and food security supervision. Herein, a near-infrared fluorescent probe LJ is rationally constructed for sensing HSO₃^-. The fluorescence quenching recognition mechanism was realized by the addition reaction of electron-deficient CC bond in probe LJ and HSO₃^-. Probe LJ revealed multifarious preponderances such as longer wavelength emission (710 nm), low cytotoxicity, larger Stokes shift (215 nm), better selectivity, higher sensitivity (72 nM) and short response time (50 s). Encouragingly, probe LJ can detect HSO₃^- in living zebrafish and mice in vivo by fluorescence imaging techniques. In the meantime, probe LJ was also successfully employed to semi-quantitatively detect HSO₃^- in real foodstuff samples and water samples by the "naked-eye" colorimetry without the help of any special instruments. More importantly, quantitative detection of HSO₃^- in practical food samples was achieved through a smartphone application software. Consequently, probe LJ is expected to provide an effective and convenient way for the detection and monitoring of HSO₃^- in organisms and for food safety detection, which has tremendous application potential.

Development of a responsive probe for colorimetric and fluorescent detection of bisulfite in food and animal serum samples in 100% aqueous solution

Bisulfite (HSO₃^-) has the functions of bleaching, antiseptic, antioxidant, inhibiting bacterial growth, and controlling enzymatic reactions in food. However, long-term consumption of foods containing excessive amounts of bisulfite can be harmful to health. In addition, large doses of sulfur dioxide (SO₂) can cause diarrhea, hypotension, allergic and asthmatic reactions in susceptible individuals. Therefore, it is urgent and essential to explore some rapid, reliable, and convenient tools to detect HSO₃^- in food and SO₂ gas. Herein, we exploited a fluorescent probe, NPO, to detect HSO₃^- in 100 % aqueous solution. The probe has the advantages of easy synthesis, excellent water solubility, significant colorimetric change, good selectivity, high sensitivity, and fast response (within 1 min). Probe NPO was successfully applied for testing strips to visualize the behavior of HSO₃^- and SO₂ gas. Moreover, the probe has been used to monitor the behavior of HSO₃^- in real food samples and animal serum samples.

Carbon dot and silver nanoparticle-based fluorescent probe for the determination of sulfite and bisulfite via inner-filter effect and competitive redox reactions

A new sensitive fluorescent probe (CDs-AgNP/H₂O₂) for detecting sulfite and bisulfite (SO₃^2- and HSO₃^-) based on the inner-filter effect (IFE) between silver nanoparticles (AgNPs) and carbon dots (CDs) was developed. Because of the spectral overlap between the absorption of AgNPs and the excitation of CDs, the fluorescence of CDs can be quenched by AgNPs owing to the IFE. H₂O₂ weakens the IFE and restores the fluorescence due to the oxidation of AgNPs by H₂O₂. However, the existence of SO₃^2-/HSO₃^- can quench the fluorescence again as a result of redox reaction between SO₃^2-/HSO₃^- and H₂O₂. The results showed a broad linear range of 20-200 μM with a low limit of detection (3.02 μM) toward SO₃^2-/HSO₃^-. The combination of IFE and redox reaction led to improvement of the sensitivity and selectivity. The probe was implemented to measure SO₃^2-/HSO₃^- in various agricultural products and foods with acceptable results (80.6 to 118.9% recovery).

Dual-Responsive Benzo-Hemicyanine-Based Fluorescent Probe for Detection of Cyanide and Hydrogen Sulfide: Real-Time Application in Identification of Food Spoilage

Colorimetric and fluorescent probes have received a lot of attention for detecting lethal analytes in realistic systems and in living things. Herein, a dual-approachable Benzo-hemicyaninebased red-emitting fluorescent probe PBiSMe, for distinct and instantaneous detection of CN^- and HS^- was synthesized. The PBiSMe emitted red fluorescence (570 nm) can switch to turn-off (570 nm) and blue fluorescence (465 nm) in response to CN^- and HS^-, respectively. Other nucleophilic reagents, such as reactive sulfur species (RSS) and anions, have no contact or interference with the probe; instead, a unique approach is undertaken to exclusively interact with CN^- and HS^- over a wide pH range. The measured detection limits for CN^- (0.43 μM) and HS^- (0.22 μM) ions are lower than the World Health Organization's (WHO) recommended levels in drinking water. We confirmed 1:1 stoichiometry ratio using Job's plot and observed good quantum yield for both analytes. The probe-coated paper strips were used to detect the H₂S gas produced by food spoilage (such as eggs, raw meat, and fish) via an eye-catching visual response. Moreover, fluorescence bioimaging studies of living cells was done to confirm the probe's potential by monitoring the presence of CN^- and HS^- in a living system.

Recent Advancements in the Design and Development of Near Infrared (NIR) Emitting Fluorescent Probes for Sensing and their Bio-Imaging Applications

Fluorescent bio-imaging will be the future in the medical diagnostic for visualising inner cellular and tissues. Near-infrared (NIR) emitting fluorescent probes serve dynamically for targeted fluorescent imaging of live cells and tissues. NIR imaging is advantageous because of its merits like deep tissue penetration, minimum damage to the tissue, reduced auto fluorescence from the background, and improved resolution in imaging. The Development of the NIR emitting probe was well explored recently and growing drastically. In this review, we summarise recent achievements in NIR probes in between 2018-2021. The merits and future applications have also been discussed in this review.

Small-Molecule Fluorescent Probe for Detection of Sulfite

Sulfite is widely used as an antioxidant additive and preservative in food and beverages. Abnormal levels of sulfite in the body is related to a variety of diseases. There are strict rules for sulfite intake. Therefore, to monitor the sulfite level in physiological and pathological events, there is in urgent need to develop a rapid, accurate, sensitive, and non-invasive approach, which can also be of great significance for the improvement of the corresponding clinical diagnosis. With the development of fluorescent probes, many advantages of fluorescent probes for sulfite detection, such as real time imaging, simple operation, economy, fast response, non-invasive, and so on, have been gradually highlighted. In this review, we enumerated almost all the sulfite fluorescent probes over nearly a decade and summarized their respective characteristics, in order to provide a unified platform for their standardized evaluation. Meanwhile, we tried to systematically review the research progress of sulfite small-molecule fluorescent probes. Logically, we focused on the structures, reaction mechanisms, and applications of sulfite fluorescent probes. We hope that this review will be helpful for the investigators who are interested in sulfite-associated biological procedures.

Selective visualization of cyanide in food, living cells and zebrafish by a mitochondria targeted NIR-emitting fluorescent probe

Cyanide is a highly toxic substance, and the detection of cyanide in the environment and food samples is critical to public health care. Herein, we rationally designed a mitochondria-targeted near-infrared fluorescent probe BTC for ratiometric monitoring of CN^- in water, food, living cells, and zebrafish. BTC exhibits a remarkable colorimetric ratiometric fluorescence response to CN^- with high selectivity, low detection limit (54.3 nM), and large Stokes shift. The cyanide sensing mechanism was demonstrated by NMR and ESI-MS analysis and density functional theory (DFT). More importantly, BTC was used for efficient naked-eye colorimetric detection of CN^- in sprouting potatoes, almonds, and ginkgo fruit samples. Further, the BTC is capable of situ tracking and imaging cyanide in mitochondria of SMMC-7721 cells and in zebrafish via dual emission channels, and was prepared into a kit for convenient and visual on-site sensing of cyanide in food samples.

A mitochondria-targeted near-infrared fluorescent probe for detection and imaging of HSO3- in living cells

Sulfur dioxide, an essential gas signaling molecule mainly produced in mitochondria, plays important roles in many physiological and pathological processes. Herein, a near-infrared fluorescent probe, A1, with good mitochondria targeting ability was developed for colorimetric and fluorescence detection of HSO₃^-. Probe A1 has a conjugated cyanine structure that can selectively react with HSO₃^- through the nucleophilic addition. The reaction with HSO₃^- destroys the conjugated structure of probe A1, resulting in fluorescence quenching, and accompaniedby color change of probe A1 solution from purple-red to colorless. Probe A1 showed high selectivity and good sensitivity to HSO₃^- in PBS. And the limit of detection was calculated to be 1.28 and 0.037 μM for colorimetry and fluorescence spectrophotometry respectively. In addition, probe A1 mainly entered the mitochondria in living cells, and was successfully used for imaging the exogenous/endogenous HSO₃^- in cells. These results suggest the potential applications of probe A1 in biological systems.

A new amine moiety-based near-infrared fluorescence probe for detection of formaldehyde in real food samples and mice

A new amine moiety-based near-infrared fluorescent probe (Probe-NH₂) is developed for detection of formaldehyde in food samples and mice. Probe-NH₂ is constructed and synthesized from the IR-780 via two-step reactions as a hemicyanine skeleton bearing an amino moiety. The response mechanism is based on Schiff base reaction that formaldehyde reacts with amine group to form the corresponding imines. Probe-NH₂ for detection of formaldehyde exhibits excellent analytical performance, including near-infrared fluorescence emission at 708 nm, high selectivity and sensitivity, also provides a response time as low as 30 min with a detection limit of 1.87 μmolL^-1. Notably, we constructed a simple, rapid and visual formaldehyde detection platform based on paper chips in the near-infrared region for the first time. The accurate detection of formaldehyde in real food samples is of great significance, Probe-NH₂ was detected in dried beancurd sticks, endive sprout, frozen shrimp and squid, with good recoveries of 99.60%-112.72%, indicating the reliability of Probe-NH₂ for spiked determination of formaldehyde in contaminated foods. More importantly, Probe-NH₂ has been successfully applied to the detection of endogenous formaldehyde in mice.

A new near-infrared fluorescence probe synthesized from IR-783 for detection and bioimaging of hydrogen peroxide in vitro and in vivo

A new near-infrared fluorescence probe was developed and synthesized for detection of hydrogen peroxide (H₂O₂) in vitro and in vivo. Synthesized from IR-783, the probe DBIS was designed to connect 4-(Bromomethyl)benzeneboronic acid pinacol ester as the recognizing moiety to the stable hemicyanine skeleton. Reaction of probe DBIS with H₂O₂ would result in the oxidation of phenylboronic acid pinacol ester, and thereby release the near-infrared fluorophore HXIS. The background signal of probe DBIS is very low, which is necessary for sensitive detection. Compared with the existing probes for detecting H₂O₂, the proposed probe DBIS shows excellent optical performance in vitro and in vivo, high selectivity, high sensitivity and good water solubility, as well as near-infrared fluorescence emission 708 nm, with a low detection limit of 0.12 μM. Furthermore, probe DBIS is low cytotoxic, cell membrane permeable, and its applicability has been shown to visualize endogenous H₂O₂ in mice. In addition, it is the first time that paper chips have been used as carrier to detect H₂O₂ through fluorescence signals instead of the traditional liquid phase detection mode of fluorescent probes. These superior characteristics of the probe make it have great application potential in biological systems or in vivo related research.

All-in-one: Accurate quantification, on-site detection, and bioimaging of sulfite using a colorimetric and ratiometric fluorescent probe in vitro and in vivo

SO₂ and its derivatives (SO₃^2-/HSO₃^-) are used widely in food, beverages, and pharmaceutical production. However, they could induce multiple diseases in respiratory, nervous, and cardiovascular systems. Although several fluorescent probes have been developed for detecting SO₃^2-/HSO₃^-, reports on rapid fluorescent probes for the on-site detection of SO₂ derivatives are scarce. Herein, a colorimetric and ratiometric fluorescent probe 1 based on the intramolecular charge transfer (ICT) was reported. Probe 1 resulted in a 122 nm blue-shift in fluorescent emission and decrement of absorbance at 500 nm upon the addition of sulfite. Therefore, probe 1 could quantify SO₃^2-/HSO₃^- using both UV-Vis and fluorescent methods (LOD: UV-Vis method 34 nM; fluorescent method 51 nM). Importantly, probe 1 was used for a rapid (60 s) and convenient (1 step, on-site) measurement of the SO₂ derivatives in real samples (LOD: 0.47 µM) using smartphone based on the colorimetric method. The SO₃^2-/HSO₃^--sensing mechanism was confirmed as the Michael addition reaction. Furthermore, the probe was used for the real-time monitoring of SO₃^2-/HSO₃^- in A549 cells and zebrafish. In summary, an all-in-one fluorescent probe was successfully developed for the accurate quantification, on-site detection, and bioimaging of SO₃^2-/HSO₃^-.

Double-site-based a smart fluorescent sensor for logical detecting of sulphides and its imaging evaluation of living organisms

Thiophenol and hydrosulphite are a group of toxic environmental pollutants, which contaminate land, water and food exhibiting a serious risk to human health. Herein, we reported a xanthene dye-based sensor (DSF) with dual well-known response sites for visual detecting PhSH and HSO₃^-. Specifically, when DSF reacted with PhSH firstly, the color of the solution changed to blue with bright red fluorescence emission. After added with HSO₃^-, the color of the solution became yellow, and emitted yellow fluorescence signal. However, DSF was first added with HSO₃^-, the color of the solution changed to purple with no-fluorescence emission, and then PhSH was added, the color of the solution changed to yellow with a bright yellow fluorescence. Notably, DSF exhibited high sensitivity and selectivity for PhSH and HSO₃^- detection with a very low detection limits of 2.27 nM and 22.91 nM, respectively. More importantly, DSF could detect PhSH and HSO₃^- in water, real-food and biological systems. Therefore, the experimental results showed DSF as a robust new logical monitoring tool for the detection of PhSH and HSO₃^- in water, real-food samples and biological systems.

Activity-based NIR fluorescent probes based on the versatile hemicyanine scaffold: design strategy, biomedical applications, and outlook

The discovery of a near-infrared (NIR, 650-900 nm) fluorescent chromophore hemicyanine dye with high structural tailorability is of great significance in the field of detection, bioimaging, and medical therapeutic applications. It exhibits many outstanding advantages including absorption and emission in the NIR region, tunable spectral properties, high photostability as well as a large Stokes shift. These properties are superior to those of conventional fluorogens, such as coumarin, fluorescein, naphthalimides, rhodamine, and cyanine. Researchers have made remarkable progress in developing activity-based multifunctional fluorescent probes based on hemicyanine skeletons for monitoring vital biomolecules in living systems through the output of fluorescence/photoacoustic signals, and integration of diagnosis and treatment of diseases using chemotherapy or photothermal/photodynamic therapy or combination therapy. These achievements prompted researchers to develop more smart fluorescent probes using a hemicyanine fluorogen as a template. In this review, we begin by describing the brief history of the discovery of hemicyanine dyes, synthetic approaches, and design strategies for activity-based functional fluorescent probes. Then, many selected hemicyanine-based probes that can detect ions, small biomolecules, overexpressed enzymes and diagnostic reagents for diseases are systematically highlighted. Finally, potential drawbacks and the outlook for future investigation and clinical medicine transformation of hemicyanine-based activatable functional probes are also discussed.

Optimizing the framework of indolium hemicyanine to detect sulfur dioxide targeting mitochondria

Endogenous sulfur dioxide (SO₂) is mainly produced by the enzymatic reaction of sulfur-containing amino acids in mitochondria, which has unique biological activity in inflammatory reaction, regulating blood pressure and maintaining the homeostasis of biological sulfur. It is more and more common to detect monitor SO₂ levels by fluorescence probe. In recent years, the indolium hemicyanine skeleton based on the D-π-A structure has been widely used in the development of fluorescent sensors for the detection of SO_2. However, subtle changes in the chemical structure of indolium may cause significant differences in SO₂ sensing behavior. In this article, we designed and synthesized two probes with different lipophilicities to further study the relationship between the structure and optical properties of hemicyanine dyes. On the basis of previous studies, the structure of indolium hemicyanine skeleton was optimized by introducing -OH group, so that MC-1 and MC-2 had the best response to SO₃^2- in pure PBS system. In addition, the lipophilicity of MC-2 was better than that of MC-1, which enabled it to respond quickly to SO₃^2- and better target mitochondria for SO₂ detection. Most importantly, the low detection limits of MC-1 and MC-2 conducive to the detection of endogenous SO₂. This work provided an idea for developing SO₂ fluorescent sensors with excellent water solubility and low detection limit.

Hydrogen sulfide detection and zebrafish imaging by a designed sensitive and selective fluorescent probe based on resorufin

A new long-wavelength fluorescent probe 1 that could specifically identify H₂S has been successfully synthesized and applied for imaging H₂S in zebrafish. Probe 1 was readily prepared by featuring nitrobenzene as the recognition unit coupled to resorufin. The fluorescence off-on response is based on the fact that H₂S can reduce the nitro group to an amino group, followed by the 1,6-rearrangement-elimination and the release of resorufin. By evaluating the application abilities of probe 1 in vivo and vitro, it is shown that probe 1 has high sensitivity and selectivity to H₂S, low background fluorescence interference, with a low detection limit of 17.30 μM. Notably, the occurrence of the reaction can be observed by the naked eye, and the color of the solution changes from yellow to pink. More importantly, it is the first time that using paper chips as carrier to detect H₂S, which lays a foundation for the practical application of detecting H₂S. The excellent analysis and application capabilities of probe 1 make it an effective tool for further application in practice.

Naphthalene anhydride triphenylamine as a viscosity-sensitive molecular rotor for liquid safety inspection

Naphthalene anhydride triphenylamine as a viscosity-sensitive rotor was designed for carrying out fluorescence investigations on beverage deterioration.

A new metal-free near-infrared fluorescent probe based on nitrofuran for the detection and bioimaging of carbon monoxide releasing molecule-2 in vivo

As a stable donor for releasing controlled amounts of CO, carbon monoxide releasing molecule-2 (CORM-2) is a new type of therapeutic drug that contributes to exploring the pathophysiological effects of CO. The accurate detection of CORM-2 in biological systems is of great significance for controlling its dosage as a therapeutic drug and elucidating the reaction mechanisms of CO, but currently there is a lack of metal-free near-infrared fluorescent probes. Herein, a new metal-free near-infrared fluorescent probe based on nitrofuran which could selectively identify CORM-2 was designed and it has been successfully applied in living cells, zebrafish and mice. After reacting with CORM-2, both the color and fluorescence signal of the solution are restored, which is ascribed to the reduction of the nitro group. The spectroscopic probe DXPN shows high sensitivity to CORM-2 with a low detection limit of 87 nM and near-infrared fluorescence emission of 712 nm. Notably, this is the first time that paper chips are being used as a carrier to detect CORM-2 through fluorescence signals instead of the traditional liquid phase detection mode of fluorescent probes. These superior properties of the probe make it a promising and reliable tool for exploring the role played by CORM-2 in biological systems.

An NADH-selective and sensitive fluorescence probe to evaluate living cell hypoxic stress

Cellular disease and senescence are often accompanied by an imbalance in the local oxygen supply. Under hypoxia, mitochondrial NADH and FADH₂ cannot be oxidized by the mitochondrial electron transport chain, which leads to the accumulation of reducing equivalents and subsequent reduction stress. Detecting changes in intracellular NADH levels is expected to allow an assessment of stress. We synthesized a red fluorescent probe, DPMQL1, with high selectivity and sensitivity for detecting NADH in living cells. The probe DPMQL1 has strong anti-interference abilities toward various potential biological interferences, such as metal ions, anions, redox species, and other biomolecules. In addition, its detection limit can reach the nanomolar level, meaning it can display small changes in NADH levels in living cells, so as to realize the evaluation of cell-based hypoxic stress.

A near-infrared fluorescent probe targeting mitochondria for sulfite detection and its application in food and biology

Sulfur dioxide (SO2) is the main air pollutant in the environment, causing great harm to human health. Abnormal SO2 levels are usually associated with some respiratory diseases, cardiovascular diseases, and neurological disorders (even brain cancer). Therefore, monitoring SO2 levels is helpful to better understand its special physiological and pathological role. Although many fluorescent probes for SO2 have been reported, many of them were not ideal for in vivo imaging due to the short emission wavelength. In this work, a near-infrared fluorescent probe NIR-BN with emission wavelength of 680 nm was constructed by conjugating the benzopyrylium moiety and 6-hydroxy-2-naphthaldehyde. NIR-BN had high selectivity and rapidity for SO2 detection. In addition, the detection limit of NIR-BN was relatively low, which can be used for the determination of sulfite in different sugar samples with high accuracy. Of course, due to the excellent spectral and structural properties of NIR-BN, we have applied NIR-BN to the detection of SO2 in biological systems.

A colorimetric and far-red fluorescent probe for rapid detection of bisulfite/sulfite in full water-soluble based on biquinolinium and its applications

Bisulfite (HSO₃^-) and sulfite (SO₃^2-) are involved in numerous physiological processes of living systems. However, high levels of these substances are often correlated to many diseases. Herein, we designed and synthesized a simple full water-soluble colorimetric and far-red fluorescent probe (E)-1-methyl-4-(2-(1-methylquinolin-1-ium-3-yl)vinyl)quinolin-1-ium iodide trifluoromethanesulfonate (DQ) for HSO₃^-/SO₃^2- detection by coupling 1,4-dimethylquinolinium with 3-quinolinium carboxaldehyde for the first time. The probe DQ showed high selectivity for HSO₃^- detection via a 1,4-nucleophilic addition reaction with distinct color changes from colorless to purple-red and remarkable far-red fluorescence enhancement in pure aqueous solutions. Specifically, the probe displayed a fast response (<15 s) for bisulfite, which renders it suitable for real time detection of HSO₃^-. Under the optimized conditions, the far-red fluorescence intensity was linear to the concentrations of HSO₃^- in the range from 0 to 25 μM and the detection limit was as low as 0.11 μM. Additionally, the probe could be applied to sense HSO₃^- on paper strips, real sample including vermicelli and sugar and image HSO₃^- in living cells, which indicated that probe DQ has potential application in food samples and living systems.

The recent advance of organic fluorescent probe rapid detection for common substances in beverages

The beverage industry is confronted with tremendous challenges in terms of quality assurance. The allowed contents of common ingredients such as copper ions, hydrogen sulfide, cysteine and caffeine are stipulated by various governing bodies, and the beverage industry must ensure that it meets these requirements. Due to its unique advantages of high sensitivity, low cost and relatively low toxicity over high-performance liquid chromatography, atomic absorption spectrometry and nanomaterials, the use of organic fluorescent probes for the rapid detection of beverage contents has become a hot research topic. This review summarizes the detection of common substances in wine, tea, mineral water, milk and other beverages. Furthermore, the preparation of test paper and simple colour comparison are discussed to display the rapid qualitative capability of designed probes. To improve the current state of beverage safety, future trends and strategies for fast organic fluorescent probe detection in the beverage industry are also discussed.

Detection of Tyrosinase in Real Food Samples and Living Cells by a Novel Near-Infrared Fluorescence Probe

A new near-infrared fluorescence probe was developed and applied to the fluorescence detection of tyrosinase in real food samples and living cells. The probe (E)-2-(2-(6-((3-hydroxybenzyloxy)carbonylamino)-2,3-dihydro-1H-xanthen-4-yl)vinyl)-3,3-dimethyl-1-propyl-3H-indolium (1) was designed and synthesized by coupling 3-hydroxybenzyl alcohol via carbamate bond with an amino hemicyanine skeleton, based on the high anti-interference ability of 3-hydroxybenzyl alcohol to reactive oxygen species and its binding affinity to tyrosinase. Compared with the existing tyrosinase probes, the proposed probe exhibits superior analytical performance, such as high selectivity, high sensitivity, superior spatiotemporal sampling ability, fluorescence signal switching at 706 nm, and low detection limit of 0.36 U mL^-1. More importantly, the probe has been successfully used to monitor tyrosinase in the browning of apple slices for the first time, and the results indicated that the strongest fluorescence intensity could be achieved at 2.5 h to realize precise visual recognition of tyrosinase. Notably, the probe determined tyrosinase in real food samples (apple, banana, cheese, and red wine) with a stable average recovery range of 95.7-108.3% and has been successfully used to monitor tyrosinase in the living B16 cells. The superior properties of the probe make it of great potential use in food nutritional value evaluation and clinical diagnosis of melanin-related diseases.

An efficient hemicyanine dyes-based ratiometric fluorescence probe for sulfur dioxide derivatives in live-cells and seawater

In life systems, sulfurdioxide (SO₂) has very important function in several physiological processes, which can be generated endogenously during the biosynthesis of sulfur-containing amino acids. Herein, a ratiometric fluorescence probe CY carried with the structure of hemicyanine dyes has been developed to track SO₂ derivatives through Michael-addition reaction. The solution of CY shows significant changes from yellow to colorless after adding the SO₃^2-/HSO₃^- in day light within 2 min. Successfully, probe CY can detect SO₂ derivatives in living cells and seawater. Furthermore, probe CY also be used to monitor the change of SO₂ derivatives in seawater. These results give evidence of the potential application of CY in future biomedical diagnosis and marine environment research.

A near-infrared fluorogenic probe with fast response for detecting sodium dithionite in living cells

Developing a reliable fluorescence probe is crucial for accurately monitoring sodium dithionite (Na₂S₂O₄, SDT) in biosystems, but the current reported azo-based ones suffers from short excitation/emission wavelengths and relative slow response speed. To address this issue, we herein present a novel near-infrared emissive fluorescence probe for SDT, namely DCM-MQ, consisting of a dicyanomethylene-benzopyran fluorogenic reporter and a 1-methylquinolinium as recognition moiety. On the basis of the specific reduction mechanism, DCM-MQ exhibited a rapid colorimetric and fluorescent recognition for SDT (less than 3 s) with large Stokes shift (112 nm) and high sensitivity (detection limit was 19 nM). The fluorescence imaging results demonstrate that DCM-MQ is competent for monitoring SDT in living systems.

High-Specific Fluorescence Probe for SO32- Detection and Bioimaging

It is well known that sulfite (SO₃^2-) plays an indispensable role in various physiological processes. Abnormal levels of SO₃^2- can trigger a wide variety of diseases involving respiratory, nervous and cardiovascular systems. Hence, it is necessary to find an efficient approach for detection of SO₃^2-. In this study, a pyrene derivative, (E)-4-(3-oxo-3-(pyren-1-yl)prop-1-en-1-yl)phenyl acrylate (PPA), was designed and synthesized for monitoring SO₃^2-. The probe possessed simple synthetic steps, excellent anti-interference ability and specific response to SO₃^2- in the presence of other substances. The reaction between PPA and SO₃^2- was ascribed to Michael addition and the detection mechanism was confirmed by HRMS spectra analysis and FTIR analysis. Additionally, PPA responded linearly to detect SO₃^2- within the rang of 0-100 μM. The limit of detection was calculated as low as 0.17 μM in accordance with the recommendation of IUPAC (CDL =3sb/m). Notably, PPA was further applied in biological imaging in HepG2 cells, which provided a possibility to monitor SO₃^2- in vivo.

A reversible near-infrared fluorescence probe for the monitoring of HSO3−/H2O2-regulated cycles in vivo

A near-infrared (NIR) fluorescent probe (XC) was constructed for the reversible detection of HSO3−/H2O2 in biosystems. The practical applications of XC were also demonstrated by the quantitative analysis of HSO3− in white wine and sugar samples.

Reaction-Based Ratiometric and Colorimetric Chemosensor for Bioimaging of Biosulfite in Live Cells, Zebrafish, and Food Samples

In this work, a reaction-based ratiometric and colorimetric sensor was designed and synthesized for probing bisulfite (HSO₃^-) by coupling coumarin (CM) with barbituric (BA) moiety. Further tests have shown that CM-BA has high selectivity and sensitivity for the recognition of HSO₃^-, which can be applied for the detection of HSO₃^- in environmental and biological systems very effectively. The fluorescence intensity ratios (F₄₆₂/F₅₆₈) exhibited an outstanding HSO₃^--dependent response with ultrafast response time (within 20 s) and a lower detection limit (105 nM). Meanwhile, the color of the CM-BA solution changed from green to colorless during the recognition process, and its fluorescence changed from green to blue. The mechanism of response is confirmed by the density functional theory (DFT) model. In summary, CM-BA has demonstrated low toxicity and good permeability, which can be applied for imaging HSO₃^- in cells and zebrafish safely and effectively. Besides, this novel sensor CM-BA successfully realized the quantification of the concentration of HSO₃^- in paper strips and food samples.

Red-Emission Probe for Ratiometric Fluorescent Detection of Bisulfite and Its Application in Live Animals and Food Samples

Key roles of bisulfite (HSO3 -) in food quality assurance and human health necessitate a reliable analytical method for rapid, sensitive, and selective detection of HSO3 -. Herein, a new red-emitting ratiometric fluorescence probe, BIQ, is reported for sensitive and selective detection of HSO3 - in food samples and live animals. Probe BIQ recognizes HSO3 - via a 1,4-nucleophilic addition reaction. As a result of this specific reaction, emission intensities at 625 and 475 nm are dramatically changed, allowing the detection of HSO3 - in a ratiometric fluorescence model in an aqueous solution. The obvious changes of solution color from pink to transparent and fluorescence color from rose-red to cyan allow the detection of HSO3 - by naked eyes. Furthermore, probe BIQ has fast response in color and fluorescence (<2 min), excellent selectivity, and a low detection limit (0.29 μM), which enables its application in HSO3 - detection in food samples and live organisms. The practical applications of probe BIQ are then demonstrated by the visualization of HSO3 - in live animals (zebrafish and nude mouse) as well as the determination of HSO3 - in white wine and sugar.

A novel ratiometric fluorescent probe for "naked-eye" detection of sulfite ion: Applications in detection of biological SO32- ions in food and live cells

A new "turn-on" luminescent probe PI has been designed and synthesized for the selective detection of sulfite ions based on the mechanism of nucleophilic addition. The designed probe PI owns naked eye detection, excellent selectivity, sensitivity, rapid response (150 s) and low limits of detection (LOD) of 0.57 μM, which is an agreeable limit by the world wide expert food additive committees. Furthermore, the probe PI was used to recognize the sulfite ions level in realistic samples and live cells.