Combining the Transcorrelated Method with Full Configuration Interaction Quantum Monte Carlo: Application to the Homogeneous Electron Gas

Orbital optimisation in xTC transcorrelated methods

We present a combination of the bi-orthogonal orbital optimisation framework with the recently introduced xTC version of transcorrelation. This allows us to implement non-iterative perturbation based methods on top of the transcorrelated Hamiltonian. Additionally, the orbital optimisation influences results of other truncated methods, such as the distinguishable cluster with singles and doubles. The accuracy of these methods in comparison to standard xTC methods is demonstrated, and the advantages and disadvantages of the orbital optimisation are discussed.

Quantum Information Orbitals (QIO): Unveiling Intrinsic Many-Body Complexity by Compressing Single-Body Triviality

The simultaneous treatment of static and dynamic correlations in strongly correlated electron systems is a critical challenge. In particular, finding a universal scheme for identifying a single-particle orbital basis that minimizes the representational complexity of the many-body wave function is a formidable and longstanding problem. As a contribution toward its solution, we show that the total orbital correlation actually reveals and quantifies the intrinsic complexity of the wave function, once it is minimized via orbital rotations. To demonstrate the power of this concept in practice, an iterative scheme is proposed to optimize the orbitals by minimizing the total orbital correlation calculated by the tailored coupled cluster singles and doubles (TCCSD) ansatz. The optimized orbitals enable the limited TCCSD ansatz to capture more nontrivial information on the many-body wave function, indicated by the improved wave function and energy. An initial application of this scheme shows great improvement of TCCSD in predicting the singlet ground state potential energy curves of the strongly correlated C2 and Cr2 molecule.

Toward Real Chemical Accuracy on Current Quantum Hardware Through the Transcorrelated Method

Quantum computing is emerging as a new computational paradigm with the potential to transform several research fields including quantum chemistry. However, current hardware limitations (including limited coherence times, gate infidelities, and connectivity) hamper the implementation of most quantum algorithms and call for more noise-resilient solutions. We propose an explicitly correlated Ansatz based on the transcorrelated (TC) approach to target these major roadblocks directly. This method transfers, without any approximation, correlations from the wave function directly into the Hamiltonian, thus reducing the resources needed to achieve accurate results with noisy quantum devices. We show that the TC approach allows for shallower circuits and improves the convergence toward the complete basis set limit, providing energies within chemical accuracy to experiment with smaller basis sets and, thus, fewer qubits. We demonstrate our method by computing bond lengths, dissociation energies, and vibrational frequencies close to experimental results for the hydrogen dimer and lithium hydride using two and four qubits, respectively. To demonstrate our approach's current and near-term potential, we perform hardware experiments, where our results confirm that the TC method paves the way toward accurate quantum chemistry calculations already on today's quantum hardware.

Efficient Exploitation of Numerical Quadrature with Distance-Dependent Integral Screening in Explicitly Correlated F12 Theory: Linear Scaling Evaluation of the Most Expensive RI-MP2-F12 Term

We present a linear scaling atomic orbital based algorithm for the computation of the most expensive exchange-type RI-MP2-F12 term by employing numerical quadrature in combination with CABS-RI to avoid six-center-three-electron integrals. Furthermore, a robust distance-dependent integral screening scheme, based on integral partition bounds [Thompson, T. H.; Ochsenfeld, C. J. Chem. Phys. 2019, 150, 044101], is used to drastically reduce the number of the required three-center-one-electron integrals substantially. The accuracy of our numerical quadrature/CABS-RI approach and the corresponding integral screening is thoroughly assessed for interaction and isomerization energies across a variety of numerical integration grids. Our method outperforms the standard density fitting/CABS-RI approach with errors below 1 μEh even for small grid sizes and moderate screening thresholds. The choice of the grid size and screening threshold allows us to tailor our ansatz to a desired accuracy and computational efficiency. We showcase the approach's effectiveness for the chemically relevant system valinomycin, employing a triple-ζ F12 basis set combination (C54H90N6O18, 5757 AO basis functions, 10,266 CABS basis functions, 735,783 grid points). In this context, our ansatz achieves higher accuracy combined with a 135× speedup compared to the classical density fitting based variant, requiring notably less computation time than the corresponding RI-MP2 calculation. Additionally, we demonstrate near-linear scaling through calculations on linear alkanes. We achieved an 817-fold acceleration for C80H162 and an extrapolated 28,765-fold acceleration for C200H402, resulting in a substantially reduced computational time for the latter─from 229 days to just 11.5 min. Our ansatz may also be adapted to the remaining MP2-F12 terms, which will be the subject of future work.

Toward a Stochastic Complete Active Space Second-Order Perturbation Theory

In this work, an internally contracted stochastic complete active space second-order perturbation theory, stochastic-CASPT2, is reported. The method relies on stochastically sampled reduced density matrices (RDMs) up to rank four and contractions thereof with the generalized Fock matrix. A new protocol for calculating higher-order RDMs in full configuration interaction quantum Monte Carlo (FCIQMC) has been designed based on (1) restricting sampling of the corresponding excitations to a deterministic subspace, (2) averaging the RDMs from independent dynamics and (3) projecting them onto the closest positive semi-definite matrix. Our protocol avoids previously encountered numerical conditioning problems in the orthogonalization of the perturber overlap matrix stemming from numerical noise. The chromium dimer CASSCF(12,12)/CASPT2 binding curve is computed as a proof of concept.

Capturing the electron-electron cusp with the coupling-constant averaged exchange-correlation hole: A case study for Hooke's atoms

In density-functional theory, the exchange-correlation (XC) energy can be defined exactly through the coupling-constant (λ) averaged XC hole n̄xc(r,r'), representing the probability depletion of finding an electron at r' due to an electron at r. Accurate knowledge of n̄xc(r,r') has been crucial for developing XC energy density-functional approximations and understanding their performance for molecules and materials. However, there are very few systems for which accurate XC holes have been calculated since this requires evaluating the one- and two-particle reduced density matrices for a reference wave function over a range of λ while the electron density remains fixed at the physical (λ = 1) density. Although the coupled-cluster singles and doubles (CCSD) method can yield exact results for a two-electron system in the complete basis set limit, it cannot capture the electron-electron cusp using finite basis sets. Focusing on Hooke's atom as a two-electron model system for which certain analytic solutions are known, we examine the effect of this cusp error on the XC hole calculated using CCSD. The Lieb functional is calculated at a range of coupling constants to determine the λ-integrated XC hole. Our results indicate that, for Hooke's atoms, the error introduced by the description of the electron-electron cusp using Gaussian basis sets at the CCSD level is negligible compared to the basis set incompleteness error. The system-, angle-, and coupling-constant-averaged XC holes are also calculated and provide a benchmark against which the Perdew-Burke-Ernzerhof and local density approximation XC hole models are assessed.

Highly Accurate Electronic Structure of Metallic Solids from Coupled-Cluster Theory with Nonperturbative Triple Excitations

Coupled-cluster theory with single, double, and perturbative triple excitations (CCSD(T))-often considered the "gold standard" of main-group quantum chemistry-is inapplicable to three-dimensional metals due to an infrared divergence, preventing its application to many important problems in materials science. We study the full, nonperturbative inclusion of triple excitations (CCSDT) and propose a new, iterative method, which we call ring-CCSDT, that resums the essential triple excitations with the same N^{7} run-time scaling as CCSD(T). CCSDT and ring-CCSDT are used to calculate the correlation energy of the uniform electron gas at metallic densities and the structural properties of solid lithium. Inclusion of connected triple excitations is shown to be essential to achieving high accuracy. We also investigate semiempirical CC methods based on spin-component scaling and the distinguishable cluster approximation and find that they enhance the accuracy of their parent ab initio methods.

Galván I, Alavi A, Aleotti F, Aquilante F, Autschbach J, Avagliano D, Baiardi A, Bao JJ, Battaglia S, Birnoschi L, Blanco-González A, Bokarev SI, Broer R, Cacciari R, Calio PB, Carlson RK, Carvalho Couto R, Cerdán L, Chibotaru LF, Chilton NF, Church JR, Conti I, Coriani S, Cuéllar-Zuquin J, Daoud RE, Dattani N, Decleva P, de Graaf C, Delcey M, De Vico L, Dobrautz W, Dong SS, Feng R, Ferré N, Filatov(Gulak) M, Gagliardi L, Garavelli M, González L, Guan Y, Guo M, Hennefarth MR, Hermes MR, Hoyer CE, Huix-Rotllant M, Jaiswal VK, Kaiser A, Kaliakin DS, Khamesian M, King DS, Kochetov V, Krośnicki M, Kumaar AA, Larsson ED, Lehtola S, Lepetit MB, Lischka H, López Ríos P, Lundberg M, Ma D, Mai S, Marquetand P, Merritt ICD, Montorsi F, Mörchen M, Nenov A, Nguyen VHA, Nishimoto Y, Oakley MS, Olivucci M, Oppel M, Padula D, Pandharkar R, Phung QM, Plasser F, Raggi G, Rebolini E, Reiher M, Rivalta I, Roca-Sanjuán D, Romig T, Safari AA, Sánchez-Mansilla A, Sand AM, Schapiro I, Scott TR, Segarra-Martí J, Segatta F, Sergentu DC, Sharma P, Shepard R, Shu Y, Staab JK, Straatsma TP, Sørensen LK, Tenorio BNC, Truhlar DG, Ungur L, Vacher M, Veryazov V, Voß TA, Weser O, Wu D, Yang X, Yarkony D, Zhou C, Zobel JP, Lindh R. The OpenMolcas Web: A Community-Driven Approach to Advancing Computational Chemistry

The developments of the open-source OpenMolcas chemistry software environment since spring 2020 are described, with a focus on novel functionalities accessible in the stable branch of the package or via interfaces with other packages. These developments span a wide range of topics in computational chemistry and are presented in thematic sections: electronic structure theory, electronic spectroscopy simulations, analytic gradients and molecular structure optimizations, ab initio molecular dynamics, and other new features. This report offers an overview of the chemical phenomena and processes OpenMolcas can address, while showing that OpenMolcas is an attractive platform for state-of-the-art atomistic computer simulations.

Transcorrelated selected configuration interaction in a bi-orthonormal basis and with a cheap three-body correlation factor

In this work, we develop a mathematical framework for a selected configuration interaction (SCI) algorithm within a bi-orthogonal basis for transcorrelated (TC) calculations. The bi-orthogonal basis used here serves as the equivalent of the standard Hartree-Fock (HF) orbitals. However, within the context of TC, it leads to distinct orbitals for the left and right vectors. Our findings indicate that the use of such a bi-orthogonal basis allows for a proper definition of the frozen core approximation. In contrast, the use of HF orbitals results in bad error cancellations for ionization potentials and atomization energies (AE). Compared to HF orbitals, the optimized bi-orthogonal basis significantly reduces the positive part of the second-order energy (PT2), thereby facilitating the use of standard extrapolation techniques of hermitian SCI. While we did not observe a significant improvement in the convergence of the SCI algorithm, this is largely due to the use in this work of a simple three-body correlation factor introduced in a recent study. This correlation factor, which depends only on atomic parameters, eliminates the need for re-optimization of the correlation factor for molecular systems, making its use straightforward and user-friendly. Despite the simplicity of this correlation factor, we were able to achieve accurate results on the AE of a series of 14 molecules on a triple-zeta basis. We also successfully broke a double bond until the full dissociation limit while maintaining the size consistency property. This work thus demonstrates the potential of the BiO-TC-SCI approach in handling complex molecular systems.

Studies on the Transcorrelated Method

We investigate the possibility of using a transcorrelated (TC) Hamiltonian to describe electron correlation. A method to obtain TC wavefunctions was developed based on the mathematical framework of the bi-variational principle. This involves the construction of an effective TC Hamiltonian matrix, which can be solved in a self-consistent manner. This was optimized using a method we call second-order-moment minimization and demonstrate that it is possible to obtain highly accurate energies for some closed-shell atoms and helium-like ions. The effects of certain correlator terms on the description of electron-electron and electron-nuclear cusps were also examined graphically, and some TC wavefunctions were compared against near-exact Hylleraas wavefunctions.

Biorthonormal Orbital Optimization with a Cheap Core-Electron-Free Three-Body Correlation Factor for Quantum Monte Carlo and Transcorrelation

We introduce a novel three-body correlation factor that is designed to vanish in the core region around each nucleus and approach a universal two-body correlation factor for valence electrons. The transcorrelated Hamiltonian is used to optimize the orbitals of a single Slater determinant within a biorthonormal framework. The Slater-Jastrow wave function is optimized on a set of atomic and molecular systems containing both second-row elements and 3d transition metal elements. The optimization of the correlation factor and the orbitals, along with an increase in the basis set, results in a systematic lowering of the variational Monte Carlo energy for all systems tested. Importantly, the optimal parameters of the correlation factor obtained for atomic systems can be transferred to molecules. Additionally, the present correlation factor is computationally efficient and uses a mixed analytical-numerical integration scheme that reduces the costly numerical integration from R6 to R3.

Optimizing Jastrow factors for the transcorrelated method

We investigate the optimization of flexible tailored real-space Jastrow factors for use in the transcorrelated (TC) method in combination with highly accurate quantum chemistry methods, such as initiator full configuration interaction quantum Monte Carlo (FCIQMC). Jastrow factors obtained by minimizing the variance of the TC reference energy are found to yield better, more consistent results than those obtained by minimizing the variational energy. We compute all-electron atomization energies for the challenging first-row molecules C2, CN, N2, and O2 and find that the TC method yields chemically accurate results using only the cc-pVTZ basis set, roughly matching the accuracy of non-TC calculations with the much larger cc-pV5Z basis set. We also investigate an approximation in which pure three-body excitations are neglected from the TC-FCIQMC dynamics, saving storage and computational costs, and show that it affects relative energies negligibly. Our results demonstrate that the combination of tailored real-space Jastrow factors with the multi-configurational TC-FCIQMC method provides a route to obtaining chemical accuracy using modest basis sets, obviating the need for basis-set extrapolation and composite techniques.

Toward Compact Selected Configuration Interaction Wave Functions with Quantum Monte Carlo─A Case Study of C2

The ¹Σ_g⁺ ground state of C₂ is investigated using truncated CIPSI-Jastrow CSF wave functions with Hartree-Fock orbitals within the framework of variational and diffusion quantum Monte Carlo. The truncation is performed based on the absolute value of the CI coefficients, and the Jastrow, molecular orbitals, and CI parameters are either partially or fully reoptimized with respect to the variational energy. Excellent absolute as well as bond dissociation energies are obtained at DMC level with very compact, fully optimized wave functions. By studying the expansions in more detail, we observe a change in the CI picture when reoptimizing the antisymmetric part of the CIPSI-Jastrow wave functions. Furthermore, we demonstrate that a decrease in the VMC energy as well as an improvement of the nodal surface quality can be achieved─with the same expansion size─if the CSFs are selected in the presence of a Jastrow correlation function, laying the foundation for a Jastrow selected CI scheme with quantum Monte Carlo.

Ab initio calculation of real solids via neural network ansatz

Neural networks have been applied to tackle many-body electron correlations for small molecules and physical models in recent years. Here we propose an architecture that extends molecular neural networks with the inclusion of periodic boundary conditions to enable ab initio calculation of real solids. The accuracy of our approach is demonstrated in four different types of systems, namely the one-dimensional periodic hydrogen chain, the two-dimensional graphene, the three-dimensional lithium hydride crystal, and the homogeneous electron gas, where the obtained results, e.g. total energies, dissociation curves, and cohesive energies, reach a competitive level with many traditional ab initio methods. Moreover, electron densities of typical systems are also calculated to provide physical intuition of various solids. Our method of extending a molecular neural network to periodic systems can be easily integrated into other neural network structures, highlighting a promising future of ab initio solution of more complex solid systems using neural network ansatz, and more generally endorsing the application of machine learning in materials simulation and condensed matter physics.

General Analytical Nuclear Forces and Molecular Potential Energy Surface from Full Configuration Interaction Quantum Monte Carlo

The full configuration interaction quantum Monte Carlo (FCIQMC) is a state-of-the-art stochastic electronic structure method, providing a methodology to compute FCI-level state energies of molecular systems within a quantum chemical basis. However, especially to probe dynamics at the FCIQMC level, it is necessary to devise more efficient schemes to produce nuclear forces and potential energy surfaces (PES) from FCIQMC. In this work, we derive the general formula for nuclear forces from FCIQMC, and clarify different contributions of the total force. This method to obtain FCIQMC forces eliminates previous restrictions and can be used with frozen core approximation and free selection of orbitals, making it promising for more efficient nuclear forces calculations. After some numerical checks of this procedure on the binding curve of N₂ molecule, we use the FCIQMC energy and force to obtain the full-dimensional ground state PES of the water molecule via Gaussian processes regression. The new water FCIQMC PES can be used as the basis for H₂O ground state nuclear dynamics, structure optimization, and rotation-vibrational spectrum calculation.

Optimization of Large Determinant Expansions in Quantum Monte Carlo

We present a new method for the optimization of large configuration interaction (CI) expansions in the quantum Monte Carlo (QMC) framework. The central idea here is to replace the nonorthogonal variational optimization of CI coefficients performed in usual QMC calculations by an orthogonal non-Hermitian optimization thanks to the so-called transcorrelated (TC) framework, the two methods yielding the same results in the limit of a complete basis set. By rewriting the TC equations as an effective self-consistent Hermitian problem, our approach requires the sampling of a single quantity per Slater determinant, leading to minimal memory requirements in the QMC code. Using analytical quantities obtained from both the TC framework and the usual CI-type calculations, we also propose improved estimators which reduce the statistical fluctuations of the sampled quantities by more than an order of magnitude. We demonstrate the efficiency of this method on wave functions containing 10⁵-10⁶ Slater determinants, using effective core potentials or all-electron calculations. In all the cases, a sub-milli-Hartree convergence is reached within only two or three iterations of optimization.

Perturbation Calculation of the Uniform Electron Gas with a Transcorrelated Hamiltonian

With a transcorrelated Hamiltonian, we perform a many body perturbation (MBPT) calculation on the uniform electron gas in the high density regime. By using a correlation factor optimised for a single determinant Jastrow ansatz, the second order correlation energy is calculated as $\frac{1-\ln2}{\pi^{2}}\ln(r_{s})-0.05075$. This already reproduces the exact logarithmic term of the random phase approximation (RPA) result, while the constant term is roughly $7\%$ larger than the RPA one. The close agreement with the RPA method demonstrates that the transcorrelated method offers a viable and potentially efficient method for treating metallic systems.

Explicitly Correlated Electronic Structure Calculations with Transcorrelated Matrix Product Operators

In this work, we present the first implementation of the transcorrelated electronic Hamiltonian in an optimization procedure for matrix product states by the density matrix renormalization group (DMRG) algorithm. In the transcorrelation ansatz, the electronic Hamiltonian is similarity-transformed with a Jastrow factor to describe the cusp in the wave function at electron-electron coalescence. As a result, the wave function is easier to approximate accurately with the conventional expansion in terms of one-particle basis functions and Slater determinants. The transcorrelated Hamiltonian in first quantization comprises up to three-body interactions, which we deal with in the standard way by applying robust density fitting to two- and three-body integrals entering the second-quantized representation of this Hamiltonian. The lack of hermiticity of the transcorrelated Hamiltonian is taken care of along the lines of the first work on transcorrelated DMRG [ J. Chem. Phys. 2020, 153, 164115] by encoding it as a matrix product operator and optimizing the corresponding ground state wave function with imaginary-time time-dependent DMRG. We demonstrate our quantum chemical transcorrelated DMRG approach at the example of several atoms and first-row diatomic molecules. We show that transcorrelation improves the convergence rate to the complete basis set limit in comparison to conventional DMRG. Moreover, we study extensions of our approach that aim at reducing the cost of handling the matrix product operator representation of the transcorrelated Hamiltonian.

Spin Purification in Full-CI Quantum Monte Carlo via a First-Order Penalty Approach

In this article, we demonstrate that a first-order spin penalty scheme can be efficiently applied to the Slater determinant based Full-CI Quantum Monte Carlo (FCIQMC) algorithm, as a practical route toward spin purification. Two crucial applications are presented to demonstrate the validity and robustness of this scheme: the ¹Δ_g ← ³Σ_g vertical excitation in O₂ and key spin gaps in a [Mn₃^(IV)O₄] cluster. In the absence of a robust spin adaptation/purification technique, both applications would be unattainable by Slater determinant based ground state methods, with any starting wave function collapsing into the higher-spin ground state during the optimization. This strategy can be coupled to other algorithms that use the Slater determinant based FCIQMC algorithm as configuration interaction eigensolver, including the Stochastic Generalized Active Space, the similarity-transformed FCIQMC, the tailored-CC, and second-order perturbation theory approaches. Moreover, in contrast to the GUGA-FCIQMC technique, this strategy features both spin projection and total spin adaptation, making it appealing when solving anisotropic Hamiltonians. It also provides spin-resolved reduced density matrices, important for the investigation of spin-dependent properties in polynuclear transition metal clusters, such as the hyperfine-coupling constants.

Transcorrelated coupled cluster methods

Transcorrelated coupled cluster and distinguishable cluster methods are presented. The Hamiltonian is similarity transformed with a Jastrow factor in the first quantization, which results in up to three-body integrals. The coupled cluster with singles and doubles equations on this transformed Hamiltonian are formulated and implemented. It is demonstrated that the resulting methods have a superior basis set convergence and accuracy to the corresponding conventional and explicitly correlated methods. Additionally, approximations for three-body integrals are suggested and tested.

The Sign Problem in Density Matrix Quantum Monte Carlo

Density matrix quantum Monte Carlo (DMQMC) is a recently developed method for stochastically sampling the N-particle thermal density matrix to obtain exact-on-average energies for model and ab initio systems. We report a systematic numerical study of the sign problem in DMQMC based on simulations of atomic and molecular systems. In DMQMC, the density matrix is written in an outer product basis of Slater determinants. In principle, this means that DMQMC needs to sample a space that scales in the system size, N, as O[(exp(N))²]. In practice, removing the sign problem requires a total walker population that exceeds a system-dependent critical walker population (N_c), imposing limitations on both storage and compute time. We establish that N_c for DMQMC is the square of N_c for FCIQMC. By contrast, the minimum N_c in the interaction picture modification of DMQMC (IP-DMQMC) is only linearly related to the N_c for FCIQMC. We find that this difference originates from the difference in propagation of IP-DMQMC versus canonical DMQMC: the former is asymmetric, whereas the latter is symmetric. When an asymmetric mode of propagation is used in DMQMC, there is a much greater stochastic error and is thus prohibitively expensive for DMQMC without the interaction picture adaptation. Finally, we find that the equivalence between IP-DMQMC and FCIQMC seems to extend to the initiator approximation, which is often required to study larger systems with large basis sets. This suggests that IP-DMQMC offers a way to ameliorate the cost of moving between a Slater determinant space and an outer product basis.

Binding curve of the beryllium dimer using similarity-transformed FCIQMC: Spectroscopic accuracy with triple-zeta basis sets

We demonstrate how similarity-transformed full configuration interaction quantum Monte Carlo (FCIQMC) based on the transcorrelated Hamiltonian can be applied to make highly accurate predictions for the binding curve of the beryllium dimer, marking the first case study of a molecular system with this method. In this context, the non-Hermitian transcorrelated Hamiltonian, resulting from a similarity transformation with a Jastrow factor, serves the purpose to effectively address dynamic correlation beyond the used basis set and thus allows for obtaining energies close to the complete basis set limit from FCIQMC already with moderate basis sets and computational effort. Building on results from other explicitly correlated methods, we discuss the role of the Jastrow factor and its functional form, as well as potential sources for size consistency errors, and arrive at Jastrow forms that allow for high accuracy calculations of the vibrational spectrum of the beryllium dimer.

Dynamical correlation energy of metals in large basis sets from downfolding and composite approaches

Coupled-cluster theory with single and double excitations (CCSD) is a promising ab initio method for the electronic structure of three-dimensional metals, for which second-order perturbation theory (MP2) diverges in the thermodynamic limit. However, due to the high cost and poor convergence of CCSD with respect to basis size, applying CCSD to periodic systems often leads to large basis set errors. In a common "composite" method, MP2 is used to recover the missing dynamical correlation energy through a focal-point correction, but the inadequacy of finite-order perturbation theory for metals raises questions about this approach. Here, we describe how high-energy excitations treated by MP2 can be "downfolded" into a low-energy active space to be treated by CCSD. Comparing how the composite and downfolding approaches perform for the uniform electron gas, we find that the latter converges more quickly with respect to the basis set size. Nonetheless, the composite approach is surprisingly accurate because it removes the problematic MP2 treatment of double excitations near the Fermi surface. Using this method to estimate the CCSD correlation energy in the combined complete basis set and thermodynamic limits, we find that CCSD recovers 85%-90% of the exact correlation energy at r_s = 4. We also test the composite approach with the direct random-phase approximation used in place of MP2, yielding a method that is typically (but not always) more cost effective due to the smaller number of orbitals that need to be included in the more expensive CCSD calculation.

A full configuration interaction quantum Monte Carlo study of ScO, TiO, and VO molecules

Accurate ab initio calculations of 3d transition metal monoxide molecules have attracted extensive attention because of their relevance in physical and chemical science as well as theoretical challenges in treating strong electron correlation. Meanwhile, recent years have witnessed the rapid development of the full configuration interaction quantum Monte Carlo (FCIQMC) method to tackle electron correlation. In this study, we carry out FCIQMC simulations to ScO, TiO, and VO molecules and obtain accurate descriptions of 13 low-lying electronic states (ScO ²Σ⁺, ²Δ, ²Π; TiO ³Δ, ¹Δ, ¹Σ⁺, ³Π, ³Φ; VO ⁴Σ^-, ⁴Φ, ⁴Π, ²Γ, ²Δ), including states that have significant multi-configurational character. The FCIQMC results are used to assess the performance of several other wave function theory and density functional theory methods. Our study highlights the challenging nature of the electronic structure of transition metal oxides and demonstrates FCIQMC as a promising technique going forward to treat more complex transition metal oxide molecules and materials.

The Shape of Full Configuration Interaction to Come

We present a Perspective on what the future holds for full configuration interaction (FCI) theory, with an emphasis on conceptual rather than technical details. Upon revisiting the early history of FCI, a number of its key contemporary approximations are compared on as equal a footing as possible, using a recent blind challenge on the benzene molecule as a testbed [Eriksen et al., J. Phys. Chem. Lett., 2020 11, 8922]. In the process, we review the scope of applications for which FCI continues to prove indispensable, and the required traits in terms of robustness, efficacy, and reliability its modern approximations must satisfy are discussed. We close by conveying a number of general observations on the merits offered by the state-of-the-art alongside some of the challenges still faced to this day. While the field has altogether seen immense progress over the years-the past decade, in particular-it remains clear that our community as a whole has a substantial way to go in enhancing the overall applicability of near-exact electronic structure theory for systems of general composition and increasing size.

Transcorrelated density matrix renormalization group

We introduce the transcorrelated Density Matrix Renormalization Group (tcDMRG) theory for the efficient approximation of the energy for strongly correlated systems. tcDMRG encodes the wave function as a product of a fixed Jastrow or Gutzwiller correlator and a matrix product state. The latter is optimized by applying the imaginary-time variant of time-dependent (TD) DMRG to the non-Hermitian transcorrelated Hamiltonian. We demonstrate the efficiency of tcDMRG with the example of the two-dimensional Fermi-Hubbard Hamiltonian, a notoriously difficult target for the DMRG algorithm, for different sizes, occupation numbers, and interaction strengths. We demonstrate fast energy convergence of tcDMRG, which indicates that tcDMRG could increase the efficiency of standard DMRG beyond quasi-monodimensional systems and provides a generally powerful approach toward the dynamic correlation problem of DMRG.