Chiral Cyclic Aliphatic Linkers as Building Blocks for Selective Dopamine D2 or D3 Receptor Agonists

A bitopic agonist bound to the dopamine 3 receptor reveals a selectivity site

Although aminergic GPCRs are the target for ~25% of approved drugs, developing subtype selective drugs is a major challenge due to the high sequence conservation at their orthosteric binding site. Bitopic ligands are covalently joined orthosteric and allosteric pharmacophores with the potential to boost receptor selectivity and improve current medications by reducing off-target side effects. However, the lack of structural information on their binding mode impedes rational design. Here we determine the cryo-EM structure of the hD3R:GαOβγ complex bound to the D3R selective bitopic agonist FOB02-04A. Structural, functional and computational analyses provide insights into its binding mode and point to a new TM2-ECL1-TM1 region, which requires the N-terminal ordering of TM1, as a major determinant of subtype selectivity in aminergic GPCRs. This region is underexploited in drug development, expands the established secondary binding pocket in aminergic GPCRs and could potentially be used to design novel and subtype selective drugs.

Linkers in Bitopic Agonists Shape Bias Profile among Transducers for the Dopamine D2 and D3 Receptors

Bitopic ligands bind both orthosteric and allosteric or secondary binding sites within the same receptor, often resulting in an improvement of receptor selectivity, potency, and efficacy. In particular, for both agonists and antagonists of the dopamine D2 and D3 receptors (D2R and D3R), the primary therapeutic targets for several neurological and neuropsychiatric disorders, bitopic ligand design has proved advantageous in achieving better pharmacological profiles in vitro. Although the two pharmacophores within a bitopic ligand are typically considered the main drivers of conformational change for a receptor, the role of the linker that connects the two has not yet been systematically studied for its relevance in receptor activity profiles. Here, we present a comprehensive analysis of sumanirole and PF592,379-based indole-containing bitopic compounds in agonist activity at D2R and D3R, with a focus on linker chemical space and stereochemistry through testing six distinct chirally resolved linkers and a simple aliphatic linker. The structure activity relationships (SARs) of these linkers are examined extensively, beyond the conventional level, by characterizing the activation of all putative transducers over a 44 min time course. Our multiparametric analysis reveals previously unappreciated specific linker-dependent effects on primary pharmacophores, receptors, transducer activation kinetics, and bias, highlighting the utility of this comprehensive approach and the significance of the linker type in shaping transducer bias profiles.

Discovery and Optimization of N-Arylated Tetracyclic Dicarboximides That Target Primary Glioma Stem-like Cells

We recently discovered a novel N-aryl tetracyclic dicarboximide MM0299 (1) with robust activity against glioma stem-like cells that potently and selectively inhibits lanosterol synthase leading to the accumulation of the toxic shunt metabolite 24(S),25-epoxycholesterol. Herein, we delineate a systematic and comprehensive SAR study that explores the structural space surrounding the N-aryl tetracyclic dicarboximide scaffold. A series of 100 analogs were synthesized and evaluated for activity against the murine glioma stem-like cell line Mut6 and for metabolic stability in mouse liver S9 fractions. This study led to several analogs with single-digit nanomolar activity in Mut6 glioblastoma cells that were metabolically stable in S9 fractions. In vivo pharmacokinetic analysis of selected analogs identified compound 52a (IC50 = 63 nM; S9 T1/2 > 240 min) which was orally available (39% plasma; 58% brain) and displayed excellent brain exposure. Chronic oral dosing of 52a during a 2-week tolerability study indicated no adverse effect on body weight nor signs of hematologic, liver, or kidney toxicity.

Designing drugs and chemical probes with the dualsteric approach

Traditionally, drugs are monovalent, targeting only one site on the protein surface. This includes orthosteric and allosteric drugs, which bind the protein at orthosteric and allosteric sites, respectively. Orthosteric drugs are good in potency, whereas allosteric drugs have better selectivity and are solutions to classically undruggable targets. However, it would be difficult to simultaneously reach high potency and selectivity when targeting only one site. Also, both kinds of monovalent drugs suffer from mutation-caused drug resistance. To overcome these obstacles, dualsteric modulators have been proposed in the past twenty years. Compared to orthosteric or allosteric drugs, dualsteric modulators are bivalent (or bitopic) with two pharmacophores. Each of the two pharmacophores bind the protein at the orthosteric and an allosteric site, which could bring the modulator with special properties beyond monovalent drugs. In this study, we comprehensively review the current development of dualsteric modulators. Our main effort reason and illustrate the aims to apply the dualsteric approach, including a "double win" of potency and selectivity, overcoming mutation-caused drug resistance, developments of function-biased modulators, and design of partial agonists. Moreover, the strengths of the dualsteric technique also led to its application outside pharmacy, including the design of highly sensitive fluorescent tracers and usage as molecular rulers. Besides, we also introduced drug targets, designing strategies, and validation methods of dualsteric modulators. Finally, we detail the conclusions and perspectives.

Synthesis of bitopic ligands based on fallypride and evaluation of their affinity and selectivity towards dopamine D2 and D3 receptors

The difference in the secondary binding site (SBS) between the dopamine 2 receptor (D2R) and dopamine 3 receptor (D3R) has been used in the design of compounds displaying selectivity for the D3R versus D2R. In the current study, a series of bitopic ligands based on Fallypride were prepared with various secondary binding fragments (SBFs) as a means of improving the selectivity of this benzamide analog for D3R versus D2R. We observed that compounds having a small alkyl group with a heteroatom led to an improvement in D3R versus D2R selectivity. Increasing the steric bulk in the SBF increase the distance between the pyrrolidine N and Asp110, thereby reducing D3R affinity. The best-in-series compound was (2S,4R)-trans-27 which had a modest selectivity for D3R versus D2R and a high potency in the β-arrestin competition assay which provides a measure of the ability of the compound to compete with endogenous dopamine for binding to the D3R. The results of this study identified factors one should consider when designing bitopic ligands based on Fallypride displaying an improved affinity for D3R versus D2R.

Pharmacological and Physicochemical Properties Optimization for Dual-Target Dopamine D3 (D3R) and μ-Opioid (MOR) Receptor Ligands as Potentially Safer Analgesics

A new generation of dual-target μ opioid receptor (MOR) agonist/dopamine D3 receptor (D3R) antagonist/partial agonists with optimized physicochemical properties was designed and synthesized. Combining in vitro cell-based on-target/off-target affinity screening, in silico computer-aided drug design, and BRET functional assays, we identified new structural scaffolds that achieved high affinity and agonist/antagonist potencies for MOR and D3R, respectively, improving the dopamine receptor subtype selectivity (e.g., D3R over D2R) and significantly enhancing central nervous system multiparameter optimization scores for predicted blood-brain barrier permeability. We identified the substituted trans-(2S,4R)-pyrrolidine and trans-phenylcyclopropyl amine as key dopaminergic moieties and tethered these to different opioid scaffolds, derived from the MOR agonists TRV130 (3) or loperamide (6). The lead compounds 46, 84, 114, and 121 have the potential of producing analgesic effects through MOR partial agonism with reduced opioid-misuse liability via D3R antagonism. Moreover, the peripherally limited derivatives could have therapeutic indications for inflammation and neuropathic pain.

Direct Nitration of Vinylcycles with Copper Nitrate

A direct nitration of vinylcyclopropanes is disclosed with Cu(NO₃)₂ and KI in a regio- and stereoselective manner to afford nitroalkenes efficiently, where the cyclopropane skeleton was retained. The given method could be extended to other vinylcycles as well as biomolecule derivatives with wide substrate scope, good functionality tolerance, and efficient synthesis modularity. Further transformations illustrated the obtained products as versatile building blocks in organic synthesis. The proposed ionic pathway could account for the untouched small ring and the effect of KI during the reaction.

Recent advances in dopamine D2 receptor ligands in the treatment of neuropsychiatric disorders

Dopamine is a biologically active amine synthesized in the central and peripheral nervous system. This biogenic monoamine acts by activating five types of dopamine receptors (D_1-5 Rs), which belong to the G protein-coupled receptor family. Antagonists and partial agonists of D₂ Rs are used to treat schizophrenia, Parkinson's disease, depression, and anxiety. The typical pharmacophore with high D₂ R affinity comprises four main areas, namely aromatic moiety, cyclic amine, central linker and aromatic/heteroaromatic lipophilic fragment. From the literature reviewed herein, we can conclude that 4-(2,3-dichlorophenyl), 4-(2-methoxyphenyl)-, 4-(benzo[b]thiophen-4-yl)-1-substituted piperazine, and 4-(6-fluorobenzo[d]isoxazol-3-yl)piperidine moieties are critical for high D₂ R affinity. Four to six atoms chains are optimal for D₂ R affinity with 4-butoxyl as the most pronounced one. The bicyclic aromatic/heteroaromatic systems are most frequently occurring as lipophilic appendages to retain high D₂ R affinity. In this review, we provide a thorough overview of the therapeutic potential of D₂ R modulators in the treatment of the aforementioned disorders. In addition, this review summarizes current knowledge about these diseases, with a focus on the dopaminergic pathway underlying these pathologies. Major attention is paid to the structure, function, and pharmacology of novel D₂ R ligands, which have been developed in the last decade (2010-2021), and belong to the 1,4-disubstituted aromatic cyclic amine group. Due to the abundance of data, allosteric D₂ R ligands and D₂ R modulators from patents are not discussed in this review.

Approach to the specificity and selectivity between D2 and D3 receptors by mutagenesis and binding experiments part I: Expression and characterization of D2 and D3 receptor mutants

D3/D2 sub-specificity is a complex problem to solve. Indeed, in the absence of easy structural biology of the G-protein coupled receptors, and despite key progresses in this area, the systematic knowledge of the ligand/receptor relationship is difficult to obtain. Due to these structural biology limitations concerning membrane proteins, we favored the use of directed mutagenesis to document a rational towards the discovery of markedly specific D3 ligands over D2 ligands together with basic binding experiments. Using our methodology of stable expression of receptors in HEK cells, we constructed the gene encoding for 24 mutants and 4 chimeras of either D2 or D3 receptors and expressed them stably. Those cell lines, expressing a single copy of one receptor mutant each, were stably constructed, selected, amplified and the membranes from them were prepared. Binding data at those receptors were obtained using standard binding conditions for D2 and D3 dopamine receptors. We generated 26 new molecules derived from D2 or D3 ligands. Using 8 reference compounds and those 26 molecules, we characterized their binding at those mutants and chimeras, exemplifying an approach to better understand the difference at the molecular level of the D2 and D3 receptors. Although all the individual results are presented and could be used for minute analyses, the present report does not discuss the differences between D2 and D3 data. It simply shows the feasibility of the approach and its potential.