Use of (Cyclopentadienone)iron Tricarbonyl Complexes for C–N Bond Formation Reactions between Amines and Alcohols

Potent pincer-zinc catalyzed homogeneous α-alkylation and Friedländer quinoline synthesis reaction of secondary alcohols/ketones with primary alcohols

Herein, we describe an air- and moisture-stable, homogeneous zinc catalyst stabilised using an electron deficient N^N^N pincer-type ligand. This ternary, penta-coordinated neutral molecular catalyst [Zn(N^N^N)Cl2] selectively produces α-alkylated ketone derivatives (14 examples) through a one-pot acceptorless dehydrogenative coupling (ADC) reaction between secondary and primary alcohols using the borrowing hydrogen (BH) approach in good to excellent isolated yields (up to 93%). It is worth noting that this catalyst also provides an eco-friendly route for the synthesis of quinoline derivatives (30 examples) using 2-aminobenzyl alcohols as alkylating agents via successive dehydrogenative coupling and N-annulation reactions. This cost effective, easy to synthesize and environmentally benign catalyst shows excellent stability in catalytic cycles under open-air conditions, as evident from its high turnover number (∼104), and is activated by using a catalytic amount of base under milder conditions.

Substituent Effects and Mechanistic Insights on the Catalytic Activities of (Tetraarylcyclopentadienone)iron Carbonyl Compounds in Transfer Hydrogenations and Dehydrogenations

(Cyclopentadienone)iron carbonyl compounds are catalytically active in carbonyl/imine reductions, alcohol oxidations, and borrowing hydrogen reactions, but the effect of cyclopentadienone electronics on their activity is not well established. A series of (tetraarylcyclopentadienone)iron tricarbonyl compounds with varied electron densities on the cyclopentadienone were prepared, and their activities in transfer hydrogenations and dehydrogenations were explored. Additionally, mechanistic studies, including kinetic isotope effect experiments and modifications to substrate electronics, were undertaken to gain insights into catalyst resting states and turnover-limiting steps of these reactions. As the cyclopentadienone electron density increased, both the transfer hydrogenation and dehydrogenation rates increased. A catalytically relevant, trimethylamine-ligated iron compound was isolated and characterized and was observed in solution under both transfer hydrogenation and dehydrogenation conditions. Importantly, it was catalytically active in both reactions. Kinetic isotope effect data and initial rates in transfer hydrogenation reactions with 4'-substituted acetophenones provided evidence that hydrogen transfer from the catalyst to the carbonyl substrate occurred during the turnover-limiting step, and NMR spectroscopy supports the trimethylamine adduct as an off-cycle resting state and the (hydroxycyclopentadienyl)iron hydride as an on-cycle resting state. In transfer dehydrogenations of alcohols, the use of electronically modified benzylic alcohols provided evidence that the turnover-limiting step involves the transfer of hydrogen from the alcohol substrate to the catalyst. The trimethylamine-ligated compound was proposed as the primary catalyst resting state in dehydrogenations.

Ir-Catalyzed Synthesis of Functionalized Pyrrolidines and Piperidines Using the Borrowing Hydrogen Methodology

The Ir(III)-catalyzed synthesis of 3-pyrrolidinols and 4-piperidinols combining 1,2,4-butanetriol or 1,3,5-pentanetriol with primary amines was carried out. This borrowing hydrogen methodology was further extended to the sequential diamination of triols leading to amino-pyrrolidines and amino-piperidines.

N-Alkylation of organonitrogen compounds catalyzed by methylene-linked bis-NHC half-sandwich ruthenium complexes

An efficient ruthenium-catalyzed N-alkylation of amines, amides and sulfonamides has been developed employing novel pentamethylcyclopentadienylruthenium(II) complexes bearing the methylene linked bis(NHC) ligand bis(3-methylimidazol-2-ylidene)methane. The acetonitrile complex 2 has proven particularly effective with a broad range of substrates with low catalyst loading (0.1-2.5 mol%) and high functional group tolerance under mild conditions. A total of 52 N-alkylated organonitrogen compounds including biologically relevant scaffolds were synthesized from (hetero)aromatic and aliphatic amines, amides and sulfonamides using alcohols or diols as alkylating agents in up to 99% isolated yield, even on gram-scale reactions. In the case of sulfonamides, it is the first example of N-alkylation employing a transition-metal complex bearing NHC ligands.

Copper–cobalt coordination polymers and catalytic applications on borrowing hydrogen reactions

A porous copper–cobalt polymer was synthesized and achieved applications for the N-alkylation of sulfonamides with alcohols, and carboxamides with alcohols.

pH-Mediated Selective Synthesis of N-Allylic Alkylation or N-Alkylation Amines with Allylic Alcohols via an Iridium Catalyst in Water

Amination of allylic alcohols is an effective approach in the facile synthesis of N-allylic alkylation or N-alkylation amines. Recently, a series of catalysts were devised to push forward this transformation. However, current synthetic methods are typically limited to achieve either N-allylic alkylation or N-alkylation products via a certain catalyst. In this article, a pH-mediated selective synthesis of N-allylic alkylation or N-alkylation amines with allylic alcohols via an iridium catalyst with water as the environmental benign solvent is revealed, enabling the miscellaneous synthesis of N-allylic alkylation and N-alkylation products in outstanding yields. Furthermore, a gram-scale experiment with low catalyst loading offers the potential to access a distinct entry for the synthesis of the antifungal drug naftifine.

First-Row Transition-Metal Catalyzed Acceptorless Dehydrogenation and Related Reactions: A Personal Account

The development of sustainable catalytic protocols that circumvent the use of expensive and precious metal catalysts and avoid toxic reagents plays a crucial role in organic synthesis. Indeed, the direct employment of simple and abundantly available feedstock chemicals as the starting materials broadens their synthetic application in contemporary research. In particular, the transition metal-catalyzed diversification of alcohols with various nucleophilic partners to construct a wide range of building blocks is a powerful and highly desirable methodology. Moreover, the replacement of precious metal catalysts by non-precious and less toxic metals for selective transformations is one of the main goals and has been paid significant attention to in modern chemistry. In view of this, the first-row transition metal catalysts find extensive applications in various synthetic transformations such as catalytic hydrogenation, dehydrogenation, and related reactions. Herein, we have disclosed our recent developments on the base-metal catalysis such as Mn, Fe, Co, and Ni for the acceptorless dehydrogenation reactions and its application in the C-C and C-N bond formation via hydrogen auto-transfer (HA) and acceptorless dehydrogenation coupling (ADC) reactions. These HA/ADC protocols employ alcohol as alkylating agents and eliminate water and/or hydrogen gas as by-products, representing highly atom-efficient and environmentally benign reactions. Furthermore, diverse simple to complex organic molecules synthesis by C-C and C-N bond formation using feedstock alcohols are also overviewed. Overall, this account deals with the contribution and development of efficient and novel homogeneous as well as heterogeneous base-metal catalysts for sustainable chemical synthesis.

(Cyclopentadienone)iron Complexes: Synthesis, Mechanism and Applications in Organic Synthesis

(Cyclopentadienone)iron tricarbonyl complexes are catalytically active, inexpensive, easily accessible and air-stable that are extensively studied as an active pre-catalyst in homogeneous catalysis. Its versatile catalytic activity arises exclusively due to the presence of a non-innocent ligand, which can trigger its unique redox properties effectively. These complexes have been employed widely in (transfer)hydrogenation (e. g., reduction of polar multiple bonds, Oppenauer-type oxidation of alcohols), C-C and C-N bond formation (e. g., reductive aminations, α-alkylation of ketones) and other synthetic transformations. In this review, we discuss the remarkable advancement of its various synthetic applications along with synthesis and mechanistic studies, until February 2021.

Iron(II)-Catalyzed Aerobic Biomimetic Oxidation of Amines using a Hybrid Hydroquinone/Cobalt Catalyst as Electron Transfer Mediator

Herein we report the first FeII -catalyzed aerobic biomimetic oxidation of amines. This oxidation reaction involves several electron transfer steps and is inspired by biological oxidation in the respiratory chain. The electron transfer from the amine to molecular oxygen is aided by two coupled catalytic redox systems, which lower the energy barrier and improve the selectivity of the oxidation reaction. An iron hydrogen transfer complex was utilized as the substrate-selective dehydrogenation catalyst along with a bifunctional hydroquinone/cobalt Schiff base complex as a hybrid electron transfer mediator. Various primary and secondary amines were oxidized in air to their corresponding aldimines or ketimines in good to excellent yield.

N-Alkylation of Amines with Alcohols Catalyzed by Manganese(II) Chloride or Bromopentacarbonylmanganese(I)

A manganese-catalyzed N-alkylation reaction of amines with alcohols via hydrogen autotransfer strategy has been demonstrated. The developed practical catalytic system including an inexpensive, nontoxic, commercially available MnCl₂ or MnBr(CO)₅ as the metal salt and triphenylphosphine as a ligand provides access to diverse aromatic, heteroaromatic, and aliphatic secondary amines in moderate-to-high yields. In addition, this operationally simple protocol is scalable to the gram level and suitable for synthesizing heterocycles such as indole and resveratrol-derived amines known to be active for Alzheimer's disease.

Organic synthesis with the most abundant transition metal–iron: from rust to multitasking catalysts

The promising aspects of iron in synthetic chemistry are being explored for three-four decades as a green and eco-friendly alternative to late transition metals. This present review unveils these rich iron-chemistry towards different transformations.

Cyclometalated Iridium Complex-Catalyzed N-Alkylation of Amines with Alcohols via Borrowing Hydrogen in Aqueous Media

This paper develops a methodology for cyclometalated iridium complex-catalyzed N-alkylation of amines with alcohols via borrowing hydrogen in the aqueous phase. The cyclometalated iridium catalyst-mediated N-alkylation of amines with alcohols displays high activity (S/C up to 10,000 and yield up to 96%) and ratio of amine/imine (up to >99:1) in a broad range of substrates (up to 46 examples) using water as the green and eco-friendly solvent. Most importantly, this transformation is simple, efficient, and can be performed at a gram scale, showcasing its potential for industrially synthesizing N-alkylamine compounds.

Chromium-Catalyzed Alkylation of Amines by Alcohols

The alkylation of amines by alcohols is a broadly applicable, sustainable, and selective method for the synthesis of alkyl amines, which are important bulk and fine chemicals, pharmaceuticals, and agrochemicals. We show that Cr complexes can catalyze this C-N bond formation reaction. We synthesized and isolated 35 examples of alkylated amines, including 13 previously undisclosed products, and the use of amino alcohols as alkylating agents was demonstrated. The catalyst tolerates numerous functional groups, including hydrogenation-sensitive examples. Compared to many other alcohol-based amine alkylation methods, where a stoichiometric amount of base is required, our Cr-based catalyst system gives yields higher than 90 % for various alkyl amines with a catalytic amount of base. Our study indicates that Cr complexes can catalyze borrowing hydrogen or hydrogen autotransfer reactions and could thus be an alternative to Fe, Co, and Mn, or noble metals in (de)hydrogenation catalysis.

Iron-Catalyzed Acceptorless Dehydrogenative Coupling of Alcohols With Aromatic Diamines: Selective Synthesis of 1,2-Disubstituted Benzimidazoles

Benzimidazoles are important N-heteroaromatic compounds with various biological activities and pharmacological applications. Herein, we present the first iron-catalyzed selective synthesis of 1,2-disubstituted benzimidazoles via acceptorless dehydrogenative coupling of primary alcohols with aromatic diamines. The tricarbonyl (η4-cyclopentadienone) iron complex catalyzed dehydrogenative cyclization, releasing water and hydrogen gas as by-products. The earth abundance and low toxicity of iron metal enable the provision of an eco-friendly and efficient catalytic method for the synthesis of benzimidazoles.

A Simple Iron-Catalyst for Alkenylation of Ketones Using Primary Alcohols

Herein, we developed a simple iron-catalyzed system for the α-alkenylation of ketones using primary alcohols. Such acceptor-less dehydrogenative coupling (ADC) of alcohols resulted in the synthesis of a series of important α,β-unsaturated functionalized ketones, having aryl, heteroaryl, alkyl, nitro, nitrile and trifluoro-methyl, as well as halogen moieties, with excellent yields and selectivity. Initial mechanistic studies, including deuterium labeling experiments, determination of rate and order of the reaction, and quantitative determination of H₂ gas, were performed. The overall transformations produce water and dihydrogen as byproducts.

Iron(II)-Catalyzed Biomimetic Aerobic Oxidation of Alcohols

We report the first FeII -catalyzed biomimetic aerobic oxidation of alcohols. The principle of this oxidation, which involves several electron-transfer steps, is reminiscent of biological oxidation in the respiratory chain. The electron transfer from the alcohol to molecular oxygen occurs with the aid of three coupled catalytic redox systems, leading to a low-energy pathway. An iron transfer-hydrogenation complex was utilized as a substrate-selective dehydrogenation catalyst, along with an electron-rich quinone and an oxygen-activating Co(salen)-type complex as electron-transfer mediators. Various primary and secondary alcohols were oxidized in air to the corresponding aldehydes or ketones with this method in good to excellent yields.

Synthesis of Mono-N-Methyl Aromatic Amines from Nitroso Compounds and Methylboronic Acid

The selective synthesis of mono-N-methyl aromatic amines was achieved by the reaction of aromatic nitroso compounds with methylboronic acid promoted by triethylphosphite under transition metal-free conditions. The target compounds are constructed efficiently without overmethylation, under environmentally benign reaction conditions that do not require bases or reductants and therefore are of interest in pharmaceutical, agricultural, and chemical industries.

Ruthenium and Iron-Catalysed Decarboxylative N-alkylation of Cyclic α-Amino Acids with Alcohols: Sustainable Routes to Pyrrolidine and Piperidine Derivatives

A modular and waste-free strategy for constructing N-substituted cyclic amines via decarboxylative N-alkylation of α-amino acids employing ruthenium- and iron-based catalysts is presented. The reported method allows the synthesis of a wide range of five- and six-membered N-alkylated heterocycles in moderate-to-excellent yields starting from predominantly proline and a broad range of benzyl alcohols, and primary and secondary aliphatic alcohols. Examples using pipecolic acid for the construction of piperidine derivatives, as well as the one-pot synthesis of α-amino nitriles, are also shown.

Iron-Catalysed Reductive Amination of Carbonyl Derivatives with ω-Amino Fatty Acids to Access Cyclic Amines

An efficient method for the reductive amination of carbonyl derivatives with ω-amino fatty acids catalysed by an iron complex Fe(CO)₄ (IMes) [IMes=1,3-bis(2,4,6-trimethylphenyl)imidazol-2-ylidene] by means of hydrosilylation was developed. A variety of pyrrolidines, piperidines and azepanes were selectively synthesised in moderate-to-excellent yields (36 examples, 47-97 % isolated yield) with a good functional group tolerance.

Iron-Catalyzed Borrowing Hydrogen C-Alkylation of Oxindoles with Alcohols

A general and efficient iron-catalyzed C-alkylation of oxindoles has been developed. This borrowing hydrogen approach employing a (cyclopentadienone)iron carbonyl complex (2 mol %) exhibited a broad reaction scope, allowing benzylic and simple primary and secondary aliphatic alcohols to be employed as alkylating agents. A variety of oxindoles underwent selective mono-C3-alkylation in good-to-excellent isolated yields (28 examples, 50-92 % yield, 79 % average yield).

Recent advances in homogeneous borrowing hydrogen catalysis using earth-abundant first row transition metals

The review highlights the recent advances (2013-present) in the use of earth-abundant first row transition metals in homogeneous borrowing hydrogen catalysis. The utility of catalysts based on Mn, Fe, Co, Ni and Cu to promote a diverse array of important C-C and C-N bond forming reactions is described, including discussion on reaction mechanisms, scope and limitations, and future challenges in this burgeoning area of sustainable catalysis.