Fluorescent Lower Rim 1,3-Dibenzooxadiazole Conjugate of Calix[4]arene in Selective Sensing of Fluoride in Solution and in Biological Cells Using Confocal Microscopy

Stable Inner 2H Tautomer of N-Confused-like Porphyrin Embedded with a Carbazole Subunit: Synthesis, Metal Coordination, and Magnetic and Anion Sensing Studies

A new class of N-confused porphyrin 1 embedded with a carbazole subunit was prepared via [3 + 1] acid-catalyzed condensation of appropriate precursors. 1 underwent smooth metal complexation with Pd(II) and Cu(II) salts to provide the corresponding diamagnetic 1-Pd and paramagnetic 1-Cu, respectively. The single-crystal X-ray structure of 1-Pd is evident with a square-planar Pd-center through C-H activation of inverted pyrrole. Superconducting quantum interference device analysis combined with electron paramagnetic resonance (EPR) results provided insights into the paramagnetic nature of 1-Cu. Further, a ratiometric enhancement of near-IR fluorescence at 746 nm was found to be reversible upon adding CN- and F- ions. The solid-state structure of 1-Pd confirms that the anionic species is due to NH deprotonation.

Fluorescent cyclophanes and their applications

With the serendipitous discovery of crown ethers by Pedersen more than half a century ago and the subsequent introduction of host-guest chemistry and supramolecular chemistry by Cram and Lehn, respectively, followed by the design and synthesis of wholly synthetic cyclophanes-in particular, fluorescent cyclophanes, having rich structural characteristics and functions-have been the focus of considerable research activity during the past few decades. Cyclophanes with remarkable emissive properties have been investigated continuously over the years and employed in numerous applications across the field of science and technology. In this Review, we feature the recent developments in the chemistry of fluorescent cyclophanes, along with their design and synthesis. Their host-guest chemistry and applications related to their structure and properties are highlighted.

Anion Binding by Fluorescent Ureido-Hexahomotrioxacalix[3]arene Receptors: An NMR, Absorption and Emission Spectroscopic Study

Fluorescent receptors (4a-4c) based on (thio)ureido-functionalized hexahomotrioxacalix[3]arenes were synthesised and obtained in the partial cone conformation in solution. Naphthyl or pyrenyl fluorogenic units were introduced at the lower rim of the calixarene skeleton via a butyl spacer. The binding of biologically and environmentally relevant anions was studied with NMR, UV-vis absorption, and fluorescence titrations. Fluorescence of the pyrenyl receptor 4c displays both monomer and excimer fluorescence. The thermodynamics of complexation was determined in acetonitrile and was entropy-driven. Computational studies were also performed to bring further insight into the binding process. The data showed that association constants increase with the anion basicity, and AcO-, BzO- and F- were the best bound anions for all receptors. Pyrenylurea 4c is a slightly better receptor than naphthylurea 4a, and both are more efficient than naphthyl thiourea 4b. In addition, ureas 4a and 4c were also tested as ditopic receptors in the recognition of alkylammonium salts.

Selective and Fast Detection of Fluoride-Contaminated Water Based on a Novel Salen-Co-MOF Chemosensor

The development of selective and fast optical sensitive chemosensors for the detection and recognition of different cations and anions in a domain is still a challenge in biological, industrial, and environmental fields. Herein, we report a novel approach for the detection and determination of fluoride ion (F-) sensing based on a salen-cobalt metal-organic framework (Co(II)-MOF). By a simple method, the Co(II)-MOF was synthesized and characterized using several tools to elucidate the structure and morphology. The photoluminescence (PL) spectrum of the Co(II)-MOF (100.0 nM/L) was examined versus different ionic species like F-, Br-, Cl-, I-, SO4 2-, and NO3 - and some cationic species like Mg2+, Ca2+, Na+, and K+. In the case of F- ions, the PL intensity of the Co(II)-MOF was scientifically enhanced with a remarkable red shift. With the increase of F- concentration, the Co(II)-MOF PL emission spectrum was also professionally enhanced. The limit of detection (LOD) for the Co(II)-MOF chemosensor was 0.24 μg/L, while the limit of quantification (LOQ) was 0.72 μg/L. Moreover, a comparison of the Co(II)-MOF optical approach with other published reports was studied, and the mechanism of interaction was also investigated. Additionally, the applicability of the current Co(II)-MOF approach in different real water samples, such as tap water, drinking water, Nile River water, and wastewater, was extended. This easy-to-use future sensor provides reliable detection of F- in everyday applications for nonexpert users, especially in remote rural areas.

Colorimetric and fluorimetric chemosensor based on upper rim-functionalized calix[4]arene for selective detection of fluoride ion

A new colorimetric and fluorescent chemosensor for fluoride anion based on calix [4]arene bearing four sulfonamide-fluorenone subunits on the upper rim was conveniently synthesized. It showed a remarkable color change as well as the fluorescence quenching upon addition of F^- even in the presence of a wide range of anions in DMSO. The binding property of L with F^- was studied by a combination of various spectroscopic techniques, such as absorption and emission titration, Job's plot and ¹H NMR titration. It is anticipated that this design with functional group attached to upper rim of calix[4]arene platform can provide a new approach for the development of F^- chemosensor.

Optical sensing of anions by macrocyclic and interlocked hosts

This review summarises recent developments in the use of macrocyclic and mechanically-interlocked host molecules as optical sensors for anions.

Ultrasensitive, rapid and selective sensing of hazardous fluoride ion in aqueous solution using a zirconium porphyrinic luminescent metal-organic framework

The development of a rapid and sensitive method for the detection of fluoride ion (F^-) in aqueous systems is of great significance for human health and environmental monitoring. In this study, a zirconium porphyrinic luminescent metal-organic framework (LMOF), PCN-222, was employed as a novel fluorescent probe for the ultrasensitive, rapid and selective detection of F^- in water. The PCN-222 probe was prepared by a facile solvothermal method. It exhibited good fluorescence stability and was highly stable in water. The fluorescence emission of PCN-222 could be effectively and selectively quenched by F^- due to the strong coordination affinity of F^- to the zirconium clusters in PCN-222. The proposed fluorescence method for F^- detection based on PCN-222 probe afforded a linear response range of 1-20 μmol/L and a very low detection limit (0.048-0.065 μmol/L) in reference to many reported F^- fluorescent probes. Moreover, a rapid response time (<10 s) was obtained due to the open and uniform pore structure of PCN-222 that allowed the fast diffusion of F^- to interact with the zirconium recognition sites. Finally, the PCN-222 probe was successfully applied for the fluorescence detection of F^- in real water samples. These results highlight the great application potential of LMOF in the sensing fields.

Dual Naked-Eye and Optical Chemosensor for Morphine Detection in Biological Real Samples Based on Cr(III) Metal-Organic Framework Nanoparticles

The analytical detection and quantification of abuse drugs such as morphine (MOR) in biological samples are vital missions and remains to attract challenges for forensic toxicology, law enforcement, world antidoping organization, and social health fields. MOR, a benchmark analgesic drug known as "pain killer", is one of the powerful opioid medications for relieving pain, and overdose of MOR is toxic. In this article, novel promising chromium metal-organic framework nanoparticles [Cr(III)-MOF-NPs] were produced via facile synthesis and characterized using high-resolution transmission electron microscopy, field-emission scanning electron microscopy/energy-dispersive X-ray spectroscopy, mass spectrometry, X-ray photoelectron spectroscopy, elemental analysis, UV-vis, Fourier transform infrared, and thermogravimetry/differential scanning calorimetry, as well as photoluminescence (PL) investigation and magnetic properties. The PL study results revealed that the Cr(III)-MOF-NPs exhibited an emission band at 593 nm. The Cr(III)-MOF-NPs could be used in fast, selective, and sensitive MOR detection and quantification. Under the optimum experimental conditions, with the addition of MOR, a blueshift from 593 to 566 nm occurred with a remarkable PL intensity enhancement, and the color changed from brown to yellow (visually/naked-eye detection). The Cr(III)-MOF-NPs optical chemosensor exhibited a stable response for MOR in a concentration range between 0.1 and 350 nM. The detection and quantification limits were 0.167 and 0.443 nM, respectively, with a correlation coefficient (r 2) of 0.96. The developed PL chemosensor showed high selectivity for MOR over other competing interfering matrices. Moreover, the ultrasensitive chemosensor was extensively used for the determination of MOR spiked in different real samples (serum and urine samples) with acceptable recoveries and satisfactory results.

Dihomooxacalix[4]arene-Based Fluorescent Receptors for Anion and Organic Ion Pair Recognition

Fluorescent dihomooxacalix[4]arene-based receptors 5a-5c, bearing two naphthyl(thio)ureido groups at the lower rim via a butyl spacer, were synthesised and obtained in the cone conformation in solution. The X-ray crystal structures of 1,3- (5a) and 3,4-dinaphthylurea (5b) derivatives are reported. Their binding properties towards several anions of different geometries were assessed by ¹H-NMR, UV-Vis absorption and fluorescence titrations. Structural and energetic insights of the naphthylurea 5a and 5b complexes were also obtained using quantum mechanical calculations. The data showed that all receptors follow the same trend, the association constants increase with the anion basicity, and the strongest complexes were obtained with F^-, followed by the oxoanions AcO^- and BzO^-. Proximal urea 5b is a better anion receptor compared to distal urea 5a, and both are more efficient than thiourea 5c. Compounds 5a and 5b were also investigated as heteroditopic receptors for biologically relevant alkylammonium salts, such as the neurotransmitter γ-aminobutyric acid (GABA·HCl) and the betaine deoxycarnitine·HCl. Chiral recognition towards the guest sec-butylamine·HCl was also tested, and a 5:2 selectivity for (R)-sec-BuNH₃⁺·Cl^- towards (P) or (M) enantiomers of the inherently chiral receptor 5a was shown. Based on DFT calculations, the complex [(S)-sec-BuNH₃⁺·Cl^-/(M)-5a] was indicated as the more stable.

Coumarin-Calix[4]arene Conjugate-Anchored SiO2 Nanoparticles as an Ultrasensor Material for Fe3+ to Work in Water, in Serum, and in Biological Cells

A coumarin-appended calixarene derivative ( CouC4A ) and a hybrid material generated by covalently linking this onto a silica surface ( CouC4A@SiO 2 ) were synthesized and were characterized by various analytical, spectroscopy, and microscopy methods. Both these materials are capable of sensing Fe3+ with greater sensitivity and selectivity. The sensitivity is enhanced by 30,000 fold on going from a simple solution phase to the silica surface with the limit of Fe3+ detection being 1.75 ± 0.4 pM when CouC4A@SiO 2 is used, and the sensing is partially reversible with phosphates, while it is completely reversible with adenosine 5'-triphosphate (ATP). While the calix precursor, CouC4A , has a limitation to work in water, anchoring this onto SiO2 endowed it with the benefit of its use in water as well as in buffer and thereby extends its application toward Fe3+ sensing even in the biorelevant medium such as fetal bovine serum and human serum. The hybrid material is biocompatible and shows ∼90% cell viability in the case of MDA-MB231 and 3T3 cell lines. CouC4A@SiO 2 functions as a reversible sensor for Fe3+ with the use of ATP in vitro as well as in biological cells. Thus, the inorganic-organic hybrid material, such as, CouC4A@SiO 2 , is an indispensable material for sensitive and selective detection of Fe3+ in a picomolar range in solution and in nanomolar to micromolar range in biorelevant fluids and biological cells, respectively.

A simple urea-based multianalyte and multichannel chemosensor for the selective detection of F−, Hg2+ and Cu2+ in solution and cells and the extraction of Hg2+ and Cu2+ from real water sources: a logic gate mimic ensemble

Herein, a hydrazine-based chromogenic, fluorogenic and electrochemical chemosensor BCC [1,5-bis(4-cyanophenyl) carbonohydrazide] was reported.

Physicochemical and Ion-Sensing Properties of Benzofurazan-Appended Calix[4]arene in Solution and on Gold Nanoparticles: Spectroscopy, Microscopy, and DFT Computations in Support of the Species of Recognition

A calix[4]arene conjugate (L) functionalized at the lower rim with a benzofurazan fluorophore (NBD) and at the upper rim with a thioether moiety has been synthesized and characterized by ¹H NMR, ¹³C NMR, and mass spectrometry techniques. Both the absorption and emission spectral data for L in different solvents exhibited progressive changes with an increase in polarity. Ion recognition studies were performed by absorption and fluorescence spectroscopy using 10 different metal ions. Among these, Hg²⁺ exhibited greater changes in these spectra, whereas Cu²⁺ showed only significant changes and all other ions showed no change in the spectral features. Although the Hg²⁺ has dominant influence on the spectral features and provides a detection limit of 56.0 ± 0.6 ppb, the selectivity was hampered because of the presence of the derivatizations present on both the rims of L for ion interaction in solution. Therefore, L was immobilized onto gold nanoparticles (AuNP_L's) so that the upper rim derivatizations anchor onto the gold surface through Au-S interactions, and this leaves out only the lower rim NBD derivatization for interaction with ions selectively. The AuNP_L's were characterized by transmission electron microscopy, scanning electron microscopy, energy-dispersive X-ray spectroscopy, and X-ray photoelectron spectroscopy (XPS) analyses. The surface characteristics were analyzed by contact angle measurements. The AuNP_L's exhibit greater selectivity and enhanced sensitivity for Hg²⁺ ions with a lowest detection limit of 48.0 ± 0.8 ppb. The immobilization of L onto AuNPs was reflected in the corresponding fluorescence lifetime values, and the addition of Hg²⁺ to either L or AuNP_L showed fluorescence quenching. The reversible recognition of Hg²⁺ by L was demonstrated by titrating L or AuNP_L with Hg²⁺ followed by tetra-butyl ammonium iodide for several cycles. The structural features of Hg²⁺-bound species were demonstrated by density functional theory computations and were supported by the XPS data. The Hg²⁺ induces aggregated fibrillar morphology into supramolecular L, as demonstrated by microscopy when Hg²⁺ was added either to L or to AuNP_L, supporting aggregation-caused quenching.