Cyclic Hypervalent Iodine Reagents for Azidation: Safer Reagents and Photoredox-Catalyzed Ring Expansion

Photoinduced Copper-Catalyzed Asymmetric Three-Component Radical 1,2-Azidooxygenation of 1,3-Dienes

Radical-involved multicomponent difunctionalization of 1,3-dienes has recently emerged as a promising strategy for rapid synthesis of valuable allylic compounds in one-pot operation. However, the expansion of radical scope and enantiocontrol remain two major challenges. Herein, we describe an unprecedented photoinduced copper-catalyzed highly enantioselective three-component radical 1,2-azidooxygenation of 1,3-dienes with readily available azidobenziodazolone reagent and carboxylic acids. This mild protocol exhibits a broad substrate scope, high functional group tolerance, and exceptional control over chemo-, regio- and enantioselectivity, providing practical access to diverse valuable azidated chiral allylic esters. Mechanistic studies imply that the chiral copper complex is implicated as a bifunctional catalyst in both the photoredox catalyzed azidyl radical generation and enantioselective radical C-O cross-coupling.

N-(Sulfonio)Sulfilimine Reagents: Non-Oxidizing Sources of Electrophilic Nitrogen Atom for Skeletal Editing

The one-pot synthesis of λ4-dibenzothiophen-5-imino-N-dibenzothiophenium triflate (1) in multigram scale is reported. This compound reacts with Rh2(esp)2 (esp=α,α,α',α'-tetramethyl-1,3-benzenedipropionic acid) generating a Rh-coordinated sulfonitrene species, which is able to transfer the electrophilic nitrene moiety to olefins. When indenes are used as substrates, isoquinolines are obtained in good yields. We assumed that after formation of the corresponding N-sulfonio aziridine, a ring expansion occurs via selective C-C bond cleavage and concomitant elimination of dibenzothiophene. Unexpectedly, a similar protocol transforms 1-arylcyclobutenes into 1-cyano-1-arylcyclopropanes. Our calculations indicate that aziridination is not favored in this case; instead, sulfilimine-substituted cyclobutyl carbocations are initially formed, and these evolve to the isolated cyclopropanes via ring contraction. Both procedures are operationally simple, tolerate a range of functional groups, including oxidation-sensitive alcohols and aldehydes, and enable the convenient preparation of valuable 15N-labelled products. These results demonstrate the potential of 1 to provide alternative pathways for the selective transfer of N-atoms in organic molecules.

Organohypervalent heterocycles

This review summarizes the structural and synthetic aspects of heterocyclic molecules incorporating an atom of a hypervalent main-group element. The term "hypervalent" has been suggested for derivatives of main-group elements with more than eight valence electrons, and the concept of hypervalency is commonly used despite some criticism from theoretical chemists. The significantly higher thermal stability of hypervalent heterocycles compared to their acyclic analogs adds special features to their chemistry, particularly for bromine and iodine. Heterocyclic compounds of elements with double bonds are not categorized as hypervalent molecules owing to the zwitterionic nature of these bonds, resulting in the conventional 8-electron species. This review is focused on hypervalent heterocyclic derivatives of nonmetal main-group elements, such as boron, silicon, nitrogen, carbon, phosphorus, sulfur, selenium, bromine, chlorine, iodine(III) and iodine(V).

Reactivity of α-diazo sulfonium salts: rhodium-catalysed ring expansion of indenes to naphthalenes

In the presence of catalytic amounts of the paddlewheel dirhodium complex Rh2(esp)2, α-diazo dibenzothiophenium salts generate highly electrophilic Rh-coordinated carbenes, which evolve differently depending on their substitution pattern. Keto-moieties directly attached to the azomethinic carbon promote carbene insertion into one of the adjacent C-S bonds, giving rise to highly electrophilic dibenzothiopyrilium salts. This intramolecular pathway is not operative when the carbene carbon bears ester or trifluoromethyl substituents; in fact, these species react with olefins delivering easy to handle cyclopropyl-substituted sulfonium salts. When indenes are the olefins of choice, the initially formed cyclopropyl rings smoothly open with concomitant departure of dibenzothiophene, enabling access to a series of 2-functionalized naphthalenes.

SOMOphilic alkyne vs radical-polar crossover approaches: The full story of the azido-alkynylation of alkenes

We report the detailed background for the discovery and development of the synthesis of homopropargylic azides by the azido-alkynylation of alkenes. Initially, a strategy involving SOMOphilic alkynes was adopted, but only resulted in a 29% yield of the desired product. By switching to a radical-polar crossover approach and after optimization, a high yield (72%) of the homopropargylic azide was reached. Full insights are given about the factors that were essential for the success of the optimization process.

Simple, catalytic C(sp3)-H azidation using the C-H donor as the limiting reagent

C-N bonds play a critical role in pharmaceutical, agrochemical, and materials sciences, necessitating ever-better methods to forge this linkage. Here we report a simple procedure for direct C(sp3)-H azidation using iron or manganese catalysis and a nucleophilic azide source. All reagents are commercially available, the experimental procedure is simple, and we can use the C-H donor substrate as the limiting reagent, a challenge for many C-H azidation methods. Preliminary experiments are consistent with a hydrogen atom transfer (HAT)/radical ligand transfer (RLT) radical cascade mechanism and a wide variety of substrates can be azidated in moderate to high yields.

Azido-alkynylation of alkenes through radical-polar crossover

We report an azido-alkynylation of alkenes allowing a straightforward access to homopropargylic azides by combining hypervalent iodine reagents and alkynyl-trifluoroborate salts. The design of a photocatalytic redox-neutral radical polar crossover process was key to develop this transformation. A variety of homopropargylic azides possessing electron-rich and -poor aryls, heterocycles or ether substituents could be accessed in 34-84% yield. The products are synthetically useful building blocks that could be easily transformed into pyrroles or bioactive amines.

A Domino Radical Amidation/Semipinacol Approach to All-Carbon Quaternary Centers Bearing an Aminomethyl Group

A photoredox-mediated radical amidation ring-expansion sequence that enables the generation of all-carbon quaternary centers bearing a protected aminomethyl substituent is described. The methodology can be applied to both styrene and unactivated alkene substrates generating structurally diverse sp3 -rich amine derivatives in a concise manner.

Photoactive Copper Complexes: Properties and Applications

Photocatalyzed and photosensitized chemical processes have seen growing interest recently and have become among the most active areas of chemical research, notably due to their applications in fields such as medicine, chemical synthesis, material science or environmental chemistry. Among all homogeneous catalytic systems reported to date, photoactive copper(I) complexes have been shown to be especially attractive, not only as alternative to noble metal complexes, and have been extensively studied and utilized recently. They are at the core of this review article which is divided into two main sections. The first one focuses on an exhaustive and comprehensive overview of the structural, photophysical and electrochemical properties of mononuclear copper(I) complexes, typical examples highlighting the most critical structural parameters and their impact on the properties being presented to enlighten future design of photoactive copper(I) complexes. The second section is devoted to their main areas of application (photoredox catalysis of organic reactions and polymerization, hydrogen production, photoreduction of carbon dioxide and dye-sensitized solar cells), illustrating their progression from early systems to the current state-of-the-art and showcasing how some limitations of photoactive copper(I) complexes can be overcome with their high versatility.

Synthese von α-Arylacrylamiden via Lewis Base vermitteltem Aryl/Wasserstoff-Austausch

Hierin stellen wir eine neue Methode für die Synthese von α‐Arylacrylamiden vor. Die Reaktion basiert auf der Nutzung polarer S‐zu‐C Arylwanderungen, induziert durch einen Lewis‐basischen Organokatalysator. Im Unterschied zu zuvor publizierten radikalischen Arylwanderungen von Sulfonylacrylamiden, ermöglicht dieser polare Prozess eine darauffolgende Eliminierung, wodurch in Summe ein formaler Aryl/Wasserstoff‐Austausch unter Ausscheidung von SO2 stattfindet. Die vorgestellte Reaktion ist selektiv für elektronenarme aromatische Gruppen, während eine Vielfalt von Substituenten am Stickstoff und an der β‐Position toleriert werden, und erzeugt nützliche Bausteine für Folgereaktionen wie Zykloadditionen und Zyklisierungen. Der Reaktionsmechanismus wurde mithilfe quantenchemischer Berechnungen erforscht, die die unerwartete Rolle der Lewis Base in mehreren Schlüsselschritten darlegten.

Synthesis of α-Aryl Acrylamides via Lewis-Base-Mediated Aryl/Hydrogen Exchange

Herein we report a method for the synthesis of α-aryl acrylamides leveraging polar S-to-C aryl migrations induced by a Lewis basic organocatalyst. In contrast to previously reported radical aryl migrations of sulfonyl acrylimides, this polar process enables subsequent elimination, ultimately leading to a formal aryl/hydrogen exchange including SO₂ extrusion. This reaction is selective for electron-deficient aromatic groups, while tolerating a variety of substituents on nitrogen and in the β-position, and it delivers useful building blocks for further transformations, including cycloaddition and cyclisation reactions. The mechanism was investigated in detail using quantum chemical calculations, which unexpectedly revealed the Lewis base to be involved in several decisive steps.

Non-Palladium-Catalyzed Oxidative Coupling Reactions Using Hypervalent Iodine Reagents

Transition metal-catalyzed direct oxidative coupling reactions via C–H bond activation have emerged as a straightforward strategy for the construction of complex molecules in organic synthesis. The direct transformation of C–H bonds into carbon–carbon and carbon–heteroatom bonds renders the requirement of prefunctionalization of starting materials and, therefore, represents a more efficient alternative to the traditional cross-coupling reactions. The key to the unprecedented progress made in this area has been the identification of an appropriate oxidant that facilitates oxidation and provides heteroatom ligands at the metal center. In this context, hypervalent iodine compounds have evolved as mainstream reagents particularly because of their excellent oxidizing nature, high electrophilicity, and versatile reactivity. They are environmentally benign reagents, stable, non-toxic, and relatively cheaper than inorganic oxidants. For many years, palladium catalysis has dominated these oxidative coupling reactions, but eventually, other transition metal catalysts such as gold, copper, platinum, iron, etc. were found to be promising alternate catalysts for facilitating such reactions. This review article critically summarizes the recent developments in non-palladium-catalyzed oxidative coupling reactions mediated by hypervalent iodine (III) reagents with significant emphasis on understanding the mechanistic aspects in detail.

N-Terminal Selective C-H Azidation of Proline-Containing Peptides: a Platform for Late-Stage Diversification

A methodology for the C-H azidation of N-terminal proline-containing peptides was developed employing only commercially available reagents. Peptides bearing a broad range of functionalities and containing up to 6 amino acids were selectively azidated at the carbamate-protected N-terminal residue in presence of the numerous other functional groups present on the molecules. Post-functionalizations of the obtained aminal compounds were achieved: cycloaddition reactions or C-C bond formations via a sequence of imine formation/nucleophilic addition were performed, offering an easy access to diversified peptides.

Chemical versatility of azide radical: journey from a transient species to synthetic accessibility in organic transformations

The generation of azide radical (N₃˙) occurs from its precursors primarily via a single electron transfer (SET) process or homolytic cleavage by chemical methods or advanced photoredox/electrochemical methods. This in situ generated transient open-shell species has unique characteristic features that set its reactivity. In the past, the azide radical was widely used for various studies in radiation chemistry as a 1e^- oxidant of biologically important molecules, but now it is being exploited for synthetic applications based on its addition and intermolecular hydrogen atom transfer (HAT) abilities. Due to the significant role of nitrogen-containing molecules in synthesis, drug discovery, biological, and material sciences, the direct addition onto unsaturated bonds for the simultaneous construction of C-N bond with other (C-X) bonds are indeed worth highlighting. Moreover, the ability to generate O- or C-centered radicals by N₃˙ via electron transfer (ET) and intermolecular HAT processes is also well documented. The purpose of controlling the reactivity of this short-lived intermediate in organic transformations drives us to survey: (i) the history of azide radical and its structural properties (thermodynamic, spectroscopic, etc.), (ii) chemical reactivities and kinetics, (iii) methods to produce N₃˙ from various precursors, (iv) several significant azide radical-mediated transformations in the field of functionalization with unsaturated bonds, C-H functionalization via HAT, tandem, and multicomponent reaction with a critical analysis of underlying mechanistic approaches and outcomes, (v) concept of taming the reactivity of azide radicals for potential opportunities, in this review.

Hypervalent Iodine(III) Reagents with Transferable Primary Amines: Structure and Reactivity on the Electrophilic α-Amination of Stabilized Enolates

A new family of hypervalent iodine reagents containing transferable primary amine groups is described. Benziodoxolone-based reagents were synthesized on the gram-scale through operationally simple reactions in up to quantitative yields. These bench-stable solids were characterized by X-ray analysis and successfully employed in the α-amination of indanone-based β-ketoesters in up to 83% yield. Mechanistic studies indicate a substitution mechanism involving an electrophilic amine.

Decatungstate-photocatalysed C(sp3)-H azidation

C–H Azidation is an increasingly important tool for bioconjugation, materials chemistry, and the synthesis of nitrogen-containing natural products. While several approaches have been developed, these often require exotic and energetic...

The Direct Decarboxylative N-Alkylation of Azoles, Sulfonamides, Ureas, and Carbamates with Carboxylic Acids via Photoredox Catalysis

Herein, we describe a method for the direct decarboxylative C-N coupling of carboxylic acids with a range of nitrogen nucleophiles. This platform employs visible-light-mediated photoredox catalysis and an iodine(III) reagent to generate carbocation intermediates directly from aliphatic carboxylic acids via a radical-polar crossover mechanism. A variety of C-N bond-containing products are constructed from a diverse array of nitrogen heterocycles, including pyrazoles, imidazoles, indazoles, and purine bases. Furthermore, sulfonamides, ureas, and carbamates can also be utilized as the nucleophile to generate a selection of N-alkylated products. Notably, a two-step approach to construct free amines directly from carboxylic acids is accomplished using Cbz-protected amine as the nucleophile.

Electrophilic Aminating Agents in Total Synthesis

Classical amination methods involve the reaction of a nitrogen nucleophile with an electrophilic carbon center; however, in recent years, umpoled strategies have gained traction where the nitrogen source acts as an electrophile. A wide range of electrophilic aminating agents are now available, and these underpin a range of powerful C-N bond-forming processes. In this Review, we highlight the strategic use of electrophilic aminating agents in total synthesis.

Selective Azidooxygenation of Alkenes Enabled by Photo-induced Radical Transfer Using Aryl-λ3-azidoiodane Species

The photolytic radical-induced vicinal azidooxygenation of synthetically important and diverse functionalized substrates including unactivated alkenes is reported. The photoredox-catalyst/additive-free protocol enables intermolecular oxyazidation by simultaneously incorporating two new functionalities; C-O and C-N across the C=C double bond in a selective manner. Mechanistic investigations reveal the intermediacy of the azidyl radical facilitated via the photolysis of λ³-azidoiodane species and cascade proceeding to generate an active carbon-centered radical. The late-stage transformations of azido- and oxy-moieties were amply highlighted by assembling high-value drug analogs and bioactive skeletons.

Lactonization with concomitant 1,2-aryl migration and alkoxylation mediated by dialkoxyphenyl iodides generated in situ

A series of alkoxylated isobenzofuranones were conveniently synthesized from the reaction of 2-(1-arylvinyl)benzoic acids with PhI(OR)2, generated in situ from the reaction of iodosobenzene (PhIO) with alkyl alcohols. This hypervalent iodine mediated one-pot transformation is postulated to undergo a cascade reaction involving lactonization, 1,2-aryl migration and alkoxylation processes. The organocatalytic and chiral organoiodine-catalyzed asymmetric reactions of the current transformation were also probed.

Structure and Reactivity of N-Heterocyclic Alkynyl Hypervalent Iodine Reagents

Ethynylbenziodoxol(on)e (EBX) cyclic hypervalent iodine reagents have become popular reagents for the alkynylation of radicals and nucleophiles, but only offer limited possibilities for further structure and reactivity fine-tuning. Herein, the synthesis of new N-heterocyclic hypervalent iodine reagents with increased structural flexibility based on amide, amidine and sulfoximine scaffolds is reported. Solid-state structures of the reagents are reported and the analysis of the I-Calkyne bond lengths allowed assessing the trans-effect of the different substituents. Molecular electrostatic potential (MEP) maps of the reagents, derived from DFT computations, revealed less pronounced σ-hole regions for sulfonamide-based compounds. Most reagents reacted well in the alkynylation of β-ketoesters. The alkynylation of thiols afforded more variable yields, with compounds with a stronger σ-hole reacting better. In metal-mediated transformations, the N-heterocyclic hypervalent iodine reagents gave inferior results when compared to the O-based EBX reagents.

Synthesis of Quinolines via the Metal-free Visible-Light-Mediated Radical Azidation of Cyclopropenes

We report the synthesis of quinolines using cyclopropenes and an azidobenziodazolone (ABZ) hypervalent iodine reagent as an azide radical source under visible-light irradiation. Multisubstituted quinoline products were obtained in 34-81% yield. The reaction was most efficient for 3-trifluoromethylcyclopropenes, affording valuable 4-trifluoromethylquinolines. The transformation probably proceeds through the cyclization of an iminyl radical formed by the addition of the azide radical on the cyclopropene double bond, followed by ring-opening and fragmentation.

5-(Diarylimino)- and 5-(sulfoximido)dibenzothiophenium triflates: syntheses and applications as electrophilic aminating reagents

The one-pot synthesis of well-defined 5-(diarylimino) and 5-(sulfoximido)dibenzothiophenium triflates, respectively from diarylimines or sulfoximines, is reported and the structures of a series of these compounds are elucidated by X-ray crystallography. In analogy to their hypervalent I(iii) analogues, the iminoyl and sulfoximidoyl groups of these compounds can be selectively transferred to organic substrates. Specifically, the uncatalyzed imination of thiols or sulfinates proceeds with good yields, while under the mild reaction conditions offered by visible light photoredox catalysis, the radical amination of hydrazones or the sulfoximidation of benzylic, allylic and propargylic C-H bonds takes place satisfactorily.

A benzene-bridged divanadium complex-early transition metal catalyst for alkene alkylarylation with PhI(O2CR)2via decarboxylation

The synthesis, structure and catalytic activity of a benzene-bridged divanadium complex were comprehensively studied. The reduction of (Nacnac)VCl2 (1) (Nacnac = (2,6-iPr2C6H3NCMe)2HC) supported by β-diketiminate with potassium graphite (KC8) by employing benzene as the solvent allows access to the benzene-bridged inverted-sandwich divanadium complex (μ-η6:η6-C6H6)[V(Nacnac)]2 (2a), which can catalyze alkene alkylarylation with hypervalent iodine(iii) reagents (HIRs) via decarboxylation to generate regioselectively diverse indolinones. Furthermore, the mild nature of this reaction was amenable to a wide range of functionalities on alkenes and HIRs. Mechanistic studies revealed a relay sequence of decarboxylative radical alkylation/radical arylation/oxidative re-aromatization.

Azide Radical Initiated Ring Opening of Cyclopropenes Leading to Alkenyl Nitriles and Polycyclic Aromatic Compounds

We report herein a radical-mediated amination of cyclopropenes. The transformation proceeds through a cleavage of the three-membered ring after the addition of an azide radical on the strained double bond and leads to tetrasubstituted alkenyl nitrile derivatives upon loss of N₂ . With 1,2-diaryl substituted cyclopropenes, this methodology could be extended to a one-pot synthesis of highly functionalized polycyclic aromatic compounds (PACs). This transformation allows the synthesis of nitrile-substituted alkenes and aromatic compounds from rapidly accessed cyclopropenes using only commercially available reagents.

Photoinduced Cross-Coupling of Aryl Iodides with Alkenes

A protocol for photoinduced cross-coupling of aryl iodides having polar π-functional groups or elongated π-conjugation with alkenes has been developed. The radical cascade mechanism involving generation of aryl radicals via C-I bond homolysis of photoexcited aryl iodides and their subsequent addition to alkenes is proposed. The method enables iodide-selective cross-coupling over other halogen leaving groups with functional group compatibility on both arene and alkene motifs.

Biobased Aldehydes from Fatty Epoxides through Thermal Cleavage of β-Hydroxy Hydroperoxides*

The ring-opening of epoxidized methyl oleate by aqueous H₂ O₂ has been studied using tungsten and molybdenum catalysts to form the corresponding fatty β-hydroxy hydroperoxides. It was found that tungstic acid and phosphotungstic acid gave the highest selectivities (92-93 %) towards the formation of the desired products, thus limiting the formation of the corresponding fatty 1,2-diols. The optimized conditions were applied to a range of fatty epoxides to give the corresponding fatty β-hydroxy hydroperoxides with 30-80 % isolated yields (8 examples). These species were fully characterized by ¹ H and ¹³ C NMR spectroscopy and HPLC-HRMS, and their stability was studied by differential scanning calorimetry. The thermal cleavage of the β-hydroxy hydroperoxide derived from methyl oleate was studied both in batch and flow conditions. It was found that the thermal cleavage in flow conditions gave the highest selectivity towards the formation of aldehydes with limited amounts of byproducts. The aldehydes were both formed with 68 % GC yield, and nonanal and methyl 9-oxononanoate were isolated with 57 and 55 % yield, respectively. Advantageously, the overall process does not require large excess of H₂ O₂ and only generates water as a byproduct.

Hypervalent iodine reagent-mediated reactions involving rearrangement processes

Hypervalent iodine reagents have been extensively employed in various types of oxidative organic reactions including oxidative coupling/cyclization, bifunctionalization of olefins and cyclopropane, C-H functionalization, and oxidative rearrangement reactions. In this review, the developments of the exclusive hypervalent iodine-mediated reactions involving oxidative rearrangement processes, including [1,2]-migration, Hofmann rearrangement, Beckmann rearrangement, ring contraction, ring expansion, [3,3]-sigmatropic/iodonium-Claisen rearrangement and some miscellaneous rearrangements, have been summarized.

Recent Synthetic Applications of the Hypervalent Iodine(III) Reagents in Visible-Light-Induced Photoredox Catalysis

The synergistic combination of visible-light-induced photoredox catalysis with hypervalent iodine(III) reagents (HIRs) represents a particularly important achievement in the field of hypervalent iodine chemistry, and numerous notable organic transformations were achieved in a mild and environmentally benign fashion. This account intends to summarize recent synthetic applications of HIRs in visible-light-induced photoredox catalysis, and they are organized in terms of the photochemical roles of HIRs played in reactions.

On the Use of Differential Scanning Calorimetry for Thermal Hazard Assessment of New Chemistry: Avoiding Explosive Mistakes

Differential scanning calorimetry (DSC) is increasingly used as evidence to support a favourable safety profile of novel chemistry, or to highlight the need for caution. DSC enables preliminary assessment of the thermal hazards of a potentially energetic compound. However, unlike other standard characterisation methods, which have well defined formats for reporting data, the current reporting of DSC results for thermal hazard assessment has shown concerning trends. Around half of all results in 2019 did not include experimental details required to replicate the procedure. Furthermore, analysis for thermal hazard assessment is often only conducted in unsealed crucibles, which could lead to misleading results and dangerously incorrect conclusions. We highlight the specific issues with DSC analysis of hazardous compounds currently in the organic chemistry literature and provide simple "best practice" guidelines which will give chemists confidence in reported DSC results and the conclusions drawn from them.

Synthetic Applications of Sulfonium Salts

This minireview aims to cover the developments over the past two decades in the chemistry of sulfonium salts. Specifically, insight is provided into the synthetic strategies available for the preparation of these compounds, the different reactivity patterns that are expected depending on their structural features or the reaction conditions applied, and the diversity of organic scaffolds that can thereby be synthesized. Additionally, the pros and cons derived from the use of sulfonium salts are presented and critically compared, when possible, in relation to reagents not based on sulfur but depicting similar reactivity.