Ketone-Directed Cobalt(III)-Catalyzed Regioselective C2 Amidation of Indoles

Mechanistic Insights into Cobalt-Catalyzed Regioselective C4-Alkenylation of 3-Acetylindole: A Detailed Theoretical Study

A detailed mechanistic study of Co(III)-catalyzed C4-alkenylation of 3-acetylindole (1a) was done based on calculations at density functional theory (DFT) and correlated wave function levels. The whole catalytic cycle consists of four steps: C-H activation, olefin insertion, β-hydride elimination, and regeneration of the catalyst. The theoretical results support olefin insertion as the rate-determining step leading to the experimentally observed regioselectivity of the C4 site over the C2 site. By the analysis of three-dimensional (3D) geometries and the NCl plot, the preference for the C4 site over the C2 site could be attributed to the weaker repulsive interaction between the indole moiety and olefin in the transition states of the olefin insertion step for the former. The reliability of the theoretical mechanistic results is further confirmed through the DFT calculation of other related indole derivatives and olefin substrates.

Directed C-H Functionalization of C3-Aldehyde, Ketone, and Acid/Ester-Substituted Free (NH) Indoles with Iodoarenes via a Palladium Catalyst System

Pd(II)-catalyzed C-H arylations of free (NH) indoles including different carbonyl directing groups on C3-position with aryl iodides are demonstrated. Importantly, the reactions are carried out using the same catalyst system without any additional transient directing group (TDG). In this study, the formyl group as a directing group gave the C4-arylated indoles versus C2-arylation. Using this catalyst system, C-H functionalization of 3-acetylindoles provided domino C4-arylation/3,2-carbonyl migration products. This transformation involves the unusual migration of the acetyl group to the C2-position following C4-arylation in one pot. Meanwhile, migration of the acetyl group could be simply controlled and N-protected 3-acetylindoles afforded C4-arylation products without migration of the acetyl group. Functionalization of indole-3-carboxylic acid (or methyl ester) with aryl iodides using the present Pd(II)-catalyst system resulted in decarboxylation followed by the formation of C2-arylated indoles. Based on the control experiments and the literature, plausible mechanisms are proposed. The synthetic utilities of these acetylindole derivatives have also been demonstrated. Remarkably, C4-arylated acetylindoles have allowed the construction of functionalized pityiacitrin (a natural product).

Recent Advances in the High-Valent Cobalt-Catalyzed C-H Functionalization of N-Heterocycles

Direct functionalization of heterocycles using C-H activation widely relies on the precious metal complexes. In past decade, the use of earth abundant and inexpensive transition metal to functionalize heterocycles has become an attractive alternate strategy. This concept is also interesting due to the unique reactivity pattern of these inexpensive metals. In this context we and other research groups have utilized the high-valent cobalt complexes as an inexpensive and readily available catalyst for the functionalization of heterocycles. In this review, we intend to brief recent progress made in the area of high-valent cobalt complexes catalyzed C-H functionalization of N-containing heterocycles.

Synthesis of Cyclopentenes and Cyclohexenes Via Cobalt(II)-Catalyzed Oxidative Cyclization

A unique method for the synthesis of cyclopentenes and cyclohexenes has been achieved by the coupling of diketones and alkenes under cobalt(II) catalysis and dimethyl sulfoxide involvement. Under optimal conditions, the formation of five- and six-membered rings can be readily controlled by the α-position substitution of styrenes. This process is proposed to proceed through a reaction sequence of oxidative coupling (mediated by K₂S₂O₈), regioselective alkene insertion (promoted by cobalt), and intramolecular attack of the resulting allylcobalt species on the carbonyl group or methyl group in the reactive methylene process.

Ruthenium(ii)-catalyzed regioselective direct C4- and C5-diamidation of indoles and mechanistic studies

A ruthenium(ii)-catalyzed regioselective direct diamidation of 3-carbonylindoles at the C4- and C5-positions using various dioxazolones is described. This novel protocol allows for the effective installation of two amide groups on the benzene ring in indole. A remarkably broad substrate scope, excellent functional group tolerance, and mild reaction conditions are notable features of this protocol. Further explorations reveal that benzo[b]thiophene-3-carboxaldehyde is a viable substrate and affords its corresponding diamidation products. The diamido indoles are further converted into various functionalized products and used as sensors for metal ion detection. Density functional theory studies are also conducted to propose a reaction mechanism and provide a detailed understanding of the regioselectivity observed in the reaction.

Ruthenium(ii)-catalyzed regioselective C4-/C5-diamidation of 3-carbonylindoles is described and a DFT study is conducted to understand the observed regioselectivity and the mechanism.

RuV -Acylimido Intermediate in [RuIV (Por)Cl2 ]-Catalyzed C-N Bond Formation: Spectroscopic Characterization, Reactivity, and Catalytic Reactions

Metal-catalyzed C-N bond formation reactions via acylnitrene transfer have recently attracted much attention, but direct detection of the proposed acylnitrenoid/acylimido M(NCOR) (R=aryl or alkyl) species in these reactions poses a formidable challenge. Herein, we report on Ru(NCOR) intermediates in C-N bond formation catalyzed by [Ru^IV (Por)Cl₂ ]/N₃ COR, a catalytic method applicable to aziridine/oxazoline formation from alkenes, amination of substituted indoles, α-amino ketone formation from silyl enol ethers, amination of C(sp³ )-H bonds, and functionalization of natural products and carbohydrate derivatives (up to 99 % yield). Experimental studies, including HR-ESI-MS and EPR measurements, coupled with DFT calculations, lend evidence for the formulation of the Ru(NCOR) acylnitrenoids as a Ru^V -imido species.

O-Directed C-H functionalization via cobaltacycles: a sustainable approach for C-C and C-heteroatom bond formations

This review focuses on providing comprehensive highlights of the recent advances in the field of cobalt-catalysed C-H functionalization and related synthetic concepts, relying on these through oxygen atom coordination. In recent years, 3d transition metal (Fe, Co, Cu & Ni) catalysed C-H functionalization reactions have received immense attention on account of its higher abundance and low cost, as compared to noble metals such as Ir, Rh, Ru and Pd. Among the first-row transition metals, cobalt is one of the extensively used metals for sustainable synthesis due to its unique reactivity towards the functionalization of inert C-H bonds. The functionalization of the inert C-H bond necessitates a proximal directing group. In this context, strongly coordinating nitrogen atom directed C-H functionalizations have been well explored. Nevertheless, strongly coordinating nitrogen-containing scaffolds, such as pyridine, pyrimidine, and 8-aminoquinoline, have to be installed and removed in a separate process. In contrast, C-H functionalizations through weakly coordinating atoms, such as oxygen, are largely underdeveloped. Since the oxygen atom is a part of many readily available functional groups, such as aldehydes, ketones, carboxylic acids, and esters, it could be used as directing groups for selective C-H functionalization reactions without any modification. Thus, the use of 3d transition metals, such as cobalt, along with weakly coordinating (oxygen) directing groups for C-H functionalization reactions are more sustainable, especially for the large-scale production of pharmaceuticals in industries. During the last decade, notable progress has been made using this concept. Nonetheless, almost all the reports are restricted to the formation of C-C and C-N bond. Therefore, there is a wide scope for developing this area for the formation of other bonds, such as C-X (halogens), C-B, C-S, and C-Se.

Transition metal-catalyzed C–H functionalizations of indoles

This review summarises a wide range of transformations on the indole skeleton, including arylation, alkenylation, alkynylation, acylation, nitration, borylation, and amidation, using transition-metal catalyzed C–H functionalization as the key step.

Rhodium(III)-catalyzed C4-amidation of indole-oximes with dioxazolones via C-H activation

A novel method for the Rh(iii)-catalyzed oxime-directed C-H amidation of indoles with dioxazolones has been developed. This strategy provides an exclusive site selectivity and the directing group can be easily removed. This transformation features a wide substrate scope, good functional group tolerance and excellent yields, and may serve as a significant tool to construct structurally diverse indole derivatives for the screening of potential pharmaceuticals in the future.

Co(III)-Catalyzed C-H Amidation of Nitrogen-Containing Heterocycles with Dioxazolones under Mild Conditions

A cobalt(III)-catalyzed C-8 selective C-H amidation of quinoline N-oxide using dioxazolone as an amidating reagent under mild conditions is disclosed. The reaction proceeds efficiently with excellent functional group compatibility. The utility of the current method is demonstrated by gram scale synthesis of C-8 amide quinoline N-oxide and by converting this amidated product into functionalized quinolines. Furthermore, the developed catalytic method is also applicable for C-7 amidation of N-pyrimidylindolines and ortho-amidation of benzamides.

Revisiting the mechanism of the Fujiwara–Moritani reaction

A new perspective of the Fujiwara–Moritani reaction is presented, including its kinetic profile and catalyst deactivation studies.