Aptamer-Based K(+) Sensor: Process of Aptamer Transforming into G-Quadruplex

Slow G-Quadruplex Conformation Rearrangement and Accessibility Change Induced by Potassium in Human Telomeric Single-Stranded DNA

The guanine-rich telomeric repeats can form G-quadruplexes (G4s) that alter the accessibility of the single-stranded telomeric overhang. In this study, we investigated the effects of Na+ and K+ on G4 folding and accessibility through cation introduction and exchange. We combined differential scanning calorimetry (DSC), circular dichroism (CD), and single molecule Förster resonance energy transfer (smFRET) to monitor the stability, conformational dynamics, and complementary strand binding accessibility of G4 formed by single-stranded telomeric DNA. Our data showed that G4 formed through heating and slow cooling in K+ solution exhibited fewer conformational dynamics than G4 formed in Na+ solution, which is consistent with the higher thermal stability of G4 in K+. Monitoring cation exchange with real time smFRET at room temperature shows that Na+ and K+ can replace each other in G4. When encountering high K+ at room or body temperature, G4 undergoes a slow conformational rearrangement process which is mostly complete by 2 h. The slow conformational rearrangement ends with a stable G4 that is unable to be unfolded by a complementary strand. This study provides new insights into the accessibility of G4 forming sequences at different time points after introduction to a high K+ environment in cells, which may affect how the nascent telomeric overhang interacts with proteins and telomerase.

Complexed Photosensitizer of Hypericin with G-Quadruplex: Structure-Dependent Behavior

Despite the increased interest of visible-light-absorbing compound Hypericin (Hyp) in photodiagnosis, photocatalysis, and photodynamic therapy (PDT) applications, a major obstacle still exists; i.e., the photoactivity is diminished due to the facile aggregation of Hyp in aqueous environment that induces excited-state quenching. Herein, we explore the excited-state property of Hyp bound to the DNA G-quadruplex by combining multiple steady-state and time-resolved spectroscopy. We find that the aggregation-induced quenching effect can be successfully prevented by appropriate G-quadruplex binders that disperse Hyp into monomer. The binding of Hyp/G-quadruplex is selective, however, exhibiting a preferential binding toward parallel G-quadruplexes (c-kit2, C14B1, STAT3, S50, and PS2.M), over antiparallel or hybrid G-quadruplex (Tel22, TBA). The excited-state property of Hyp is highly related to the binding behavior, showing a consistent trend that the better the Hyp/G-quadruplex binding, the longer the triplet 3Hyp* lifetime and the higher the efficiency to produce 1O2. For Hyp/c-kit2, the major binding mode is 5'-end stacking, which offers protection from collisional quenching reactions and ensures a stable photocycle of 3Hyp*-O2 energy transfer forming 1O2, leading to the highest 1O2 quantum yield (0.67) with superior photostability. These findings open possibilities of developing Hyp/G-quadruplex complex as a biocompatible photosensitizer for PDT applications, etc.

Recent advances in aptamer-based biosensors for potassium detection

Maintaining a stable level of potassium is crucial for proper bodily function because even a slight imbalance can result in serious disorders like hyperkalemia and hypokalemia. Therefore, detecting and monitoring potassium ion (K+) levels are of utmost importance. Various biosensors have been developed for rapid K+ detection, with aptamer-based biosensors garnering significant attention due to their high sensitivity and specificity. This review focuses on aptamer-based biosensors for K+ detection, providing an overview of their signal generation strategies, including electrochemical, field-effect transistor, nanopore, colorimetric, and fluorescent systems. The analytical performance of these biosensors is evaluated comprehensively. In addition, factors that affect their efficiency, such as their physicochemical properties, regeneration for reusability, and linkers/spacers, are listed. Lastly, this review examines the major challenges faced by aptamer-based biosensors in K+ detection and discusses potential future developments.

Development of Mn2+-Specific Biosensor Using G-Quadruplex-Based DNA

Metal ions are used in various situations in living organisms and as a part of functional materials. Since the excessive intake of metal ions can cause health hazards and environmental pollution, the development of new molecules that can monitor metal ion concentrations with high sensitivity and selectivity is strongly desired. DNA can form various structures, and these structures and their properties have been used in a wide range of fields, including materials, sensors, and drugs. Guanine-rich sequences respond to metal ions and form G-quadruplex structures and G-wires, which are the self-assembling macromolecules of G-quadruplex structures. Therefore, guanine-rich DNA can be applied to a metal ion-detection sensor and functional materials. In this study, the IRDAptamer library originally designed based on G-quadruplex structures was used to screen for Mn²⁺, which is known to induce neurodegenerative diseases. Circular dichroism and fluorescence analysis using Thioflavin T showed that the identified IRDAptamer sequence designated MnG4C1 forms a non-canonical G-quadruplex structure in response to low concentrations of Mn²⁺. A serum resistance and thermostability analysis revealed that MnG4C1 acquired stability in a Mn²⁺-dependent manner. A Förster resonance energy transfer (FRET) system using fluorescent molecules attached to the termini of MnG4C1 showed that FRET was effectively induced based on Mn²⁺-dependent conformational changes, and the limit of detection (LOD) was 0.76 µM for Mn²⁺. These results suggested that MnG4C1 can be used as a novel DNA-based Mn²⁺-detecting molecule.

Validation of circular dichroic spectroscopy of synthetic oligonucleotide PS2.M for K + concentration measurements

The single-stranded synthetic oligonucleotide PS2.M is known to provide a basis for developing sensors since it tends to fold into structures called G-quadruplexes (G4) having characteristic topology and orientation with probabilities that depend on the chemical environment. The presence and concentration of cation species are among the key factors that determine the outcome of such a process. PS2.M and other aptamers have been used in several applications in conjunction with various probes, such as hemin, at the cost of increased technical complexity and applicability limitations. We instead validated the application limits of Circular Dichroic spectroscopy (CD) as only measurement method to assay PS2.M asK + sensor in a variety of solutions having different chemical complexity. The tested solutions range from simple NaCl and KCl solutions to chemically complex solutions like DMEM-Dulbecco's Modified Eagle Medium-which is widely used in a biological laboratory. PS2.M was also evaluated in solutions of KHCO 3 and D-ribose (K:D-rib), an antioxidant potassium compound, to compare its response to the simple KCl solution case. Our findings show that, within specific concentration applicability ranges, CD spectra can estimate theK + concentration in the examined water solutions even at high Na + concentrations with respect toK + and in the presence of antioxidant molecules.

Supplementary Information

The online version supplementary material available at 10.1140/epjp/s13360-022-02581-2.

Mass Spectrometry of Nucleic Acid Noncovalent Complexes

Nucleic acids have been among the first targets for antitumor drugs and antibiotics. With the unveiling of new biological roles in regulation of gene expression, specific DNA and RNA structures have become very attractive targets, especially when the corresponding proteins are undruggable. Biophysical assays to assess target structure as well as ligand binding stoichiometry, affinity, specificity, and binding modes are part of the drug development process. Mass spectrometry offers unique advantages as a biophysical method owing to its ability to distinguish each stoichiometry present in a mixture. In addition, advanced mass spectrometry approaches (reactive probing, fragmentation techniques, ion mobility spectrometry, ion spectroscopy) provide more detailed information on the complexes. Here, we review the fundamentals of mass spectrometry and all its particularities when studying noncovalent nucleic acid structures, and then review what has been learned thanks to mass spectrometry on nucleic acid structures, self-assemblies (e.g., duplexes or G-quadruplexes), and their complexes with ligands.

Label free structure-switching fluorescence polarization detection of chloramphenicol with truncated aptamer

In this study, the original chloramphenicol aptamer containing 80 bases was truncated to 30 bases with high affinity by the SYBR Green I assay. It was found that the ionic strength and type affect the recognition of aptamers, especially magnesium ion played a vital role in the binding process. Furthermore, the binding performance of aptamer, including binding mode, key binding sites and conformational changes were further investigated by circular dichroism spectroscopy, UV-vis absorption spectrum and molecular docking. Based on these research data, we inferred that chloramphenicol bound to the minor groove region in the aptamer double helix. Finally, the optimized aptamer LLR10 was used to develop a novel label free fluorescence polarization assay to detect chloramphenicol within SYBR Green I as the source of fluorescence polarization signal. Under optimal conditions, the designed method showed a linear detection range of 0.1-10 nM with a detection limit of 0.06 nM. Additionally, the aptasensor exhibited a high accuracy to the detection of chloramphenicol in milk samples with a recovery rate from 93.7% to 98.4%. Therefore, the developed label free fluorescence polarization aptasensor provides a new idea for the rapid, reliable and sensitive detection of chloramphenicol, which can be applied to food safety control.

Highly Selective Detection of K+ Based on a Dimerized G-Quadruplex DNAzyme

Potassium ion (K⁺) plays a crucial role in biological systems, such as maintaining cellular processes and causing diseases. However, specifically, the detection of K⁺ is extremely challenging because of the coexistence of the chemically similar ion of Na⁺ under physiological conditions. In this work, a K⁺ specific biosensor is constructed on the basis of a dimerized G-quadruplex (GQ) DNA, which is promoted by K⁺, and the enzymatic activity of the resulting DNAzyme depends on the concentration of the K⁺. The K⁺ in a 1-200 mM concentration range can be selectively detected by visual color, UV-Vis absorbance or fluorescence even if the concentration of the accompanying Na⁺ is up to 140 mM at an ambient condition up to 45 °C. In addition, this system can also be used to selectively detect NH₄⁺ in a 5-200 mM concentration range. This dimerized DNAzyme offers a new type of biosensor with a potential application in the biological system.

Characterization of intermolecular G-quadruplex formation over intramolecular G-triplex for DNA containing three G-tracts

G-triplex (G3) has been recognized as a popular intermediate during the folding of G-quadruplex (G4). This has raised interest to anticipate the ultimate formation of G3 by shortening the G4-forming oligonucleotides with the remaining three G-tracts. Some G3 structures have been validated and their stability has been found to be affected by the loop sequences similar to G4s. In this work, however, we first found that an intermolecular parallel G4 structure was preferred in K+ for the oligonucleotide 5'-TGGGTAGGGCGGG-3' (DZ3) containing only three G-tracts. We screened auramine O (AO) as the appropriate fluorophore with a molecular rotor feature to target this G4 structure. AO bound with DZ3 in a 1 : 4 ratio, as confirmed by isothermal titration calorimetry experiments, suggesting the formation of a tetramolecular G4 structure (4erG4). The excimer emission from the labelled pyrene and the DNA melting behavior at various pHs in the presence of Ag+ proved the formation of the 4erG4 structure rather than the prevalent intramolecular G3 folding. This work demonstrates that one should be cautious while putatively predicting a G3 structure from an oligonucleotide containing three G-tracts.

Exploration of intramolecular split G-quadruplex and its analytical applications

Distinct from intermolecular split G-quadruplex (Inter-SG), intramolecular split G-quadruplex (Intra-SG) which could be generated in a DNA spacer-inserted G-quadruplex strand has not been systematically explored. Not only is it essential for the purpose of simplicity of DNA-based bioanalytical applications, but also it will give us hints how to design split G-quadruplex-based system. Herein, comprehensive information is provided about influences of spacer length and split mode on the formation of Intra-SG, how to adjust its thermodynamic stability, and selection of optimal Intra-SG for bioanalysis. For instances, non-classical Intra-SG (e.g. 2:10, 4:8 and 5:7) displays lower stability than classical split strands (3:9, 6:6 and 9:3), which is closely related to integrity of consecutive guanine tract; as compared to regular Intra-SG structures, single-thymine capped ones have reduced melting temperature, providing an effective approach to adjustment of stability. It is believed that the disclosed rules in this study will contribute to the effective application of split G-quadruplex in the field of DNA technology in the future.

Loop permutation affects the topology and stability of G-quadruplexes

G-quadruplexes are unusual DNA and RNA secondary structures ubiquitous in a variety of organisms including vertebrates, plants, viruses and bacteria. The folding topology and stability of intramolecular G-quadruplexes are determined to a large extent by their loops. Loop permutation is defined as swapping two or three of these regions so that intramolecular G-quadruplexes only differ in the sequential order of their loops. Over the past two decades, both length and base composition of loops have been studied extensively, but a systematic study on the effect of loop permutation has been missing. In the present work, 99 sequences from 21 groups with different loop permutations were tested. To our surprise, both conformation and thermal stability are greatly dependent on loop permutation. Loop permutation actually matters as much as loop length and base composition on G-quadruplex folding, with effects on T_m as high as 17°C. Sequences containing a longer central loop have a high propensity to adopt a stable non-parallel topology. Conversely, sequences containing a short central loop tend to form a parallel topology of lower stability. In addition, over half of interrogated sequences were found in the genomes of diverse organisms, implicating their potential regulatory roles in the genome or as therapeutic targets. This study illustrates the structural roles of loops in G-quadruplex folding and should help to establish rules to predict the folding pattern and stability of G-quadruplexes.

Facile detection of melamine by a FAM-aptamer-G-quadruplex construct

The development of a novel method for melamine detection that uses a FAM-aptamer-G-quadruplex construct due to the efficient quenching ability of an aptamer-linked G-quadruplex is reported herein. The construct, which is labeled with the fluorescent dye 6-carboxyfluorescein (FAM), consists of two parts: a melamine-binding aptamer and a G-rich sequence that can form a G-quadruplex structure. Because of the specific recognition of melamine by the T-rich aptamer, this aptamer folds into a hairpin structure in the presence of melamine, which draws the G-quadruplex closer to the FAM fluorophore, leading to the quenching of the fluorescence of FAM. Thus, a highly sensitive and selective fluorescence strategy for assaying melamine was established. Under optimal conditions, the fluorescence quenching is proportional to the concentration of melamine within the range 10-90 nM, and the method has a detection limit of 6.32 nM. Further application of the method to plastic cup samples suggested that it permitted recoveries of between 97.15% ± 1.02 and 101.92% ± 2.07. The detected amounts of melamine spiked into the plastic cup samples and the corresponding amounts measured by HPLC were in good accordance, indicating that this fluorescent method is reliable and practical. Owing to its high sensitivity, excellent selectivity, and convenient procedure, this strategy represents a promising alternative method of melamine screening. Graphical abstract.

A rapid fluorometric method for determination of aflatoxin B1 in plant-derived food by using a thioflavin T-based aptasensor

A fluorometric aptamer-based method is described for the determination of aflatoxin B₁ (AFB₁). The fluorescent dye thioflavin T (ThT) forms a complex with the aptamer against AFB₁ (aptamer/ThT), and the fluorescence of the complex is strongly enhanced. On addition of AFB₁, it will bind to the aptamer and release ThT. The fluorescence of free ThT is much weaker. The fluorescence of the system, best measured at excitation/emission wavelengths of 440/487 nm, drops gradually in the AFB₁ concentration range from 0.2 to 200 ng·mL^-1, exhibiting good linearity. The detection limits are 0.2 ng·mL^-1 in buffer solution, and 1 ng·mL^-1 when applied to plant-derived food. The recovery of AFB₁ from spiked foodstuff ranges from 74.7% to 121%. The assay can be performed within 20 min. Graphical abstract Schematic presentation of label-free thioflavin T (ThT)-based fluorescence aptasensor using aflatoxin B₁(AFB₁) aptamer/ThT G-quadruplex complex and the AFB1 aptamer/AFB1 complex fluorescent signal system for the rapid and sensitive detection of AFB1 in soy sauce, spirits, rice, corn and peanuts.

Thioflavin T specifically brightening “Guanine Island” in duplex-DNA: a novel fluorescent probe for single-nucleotide mutation

Here, we found that Thioflavin T (ThT) could specifically bind with a G-GGG unit (named as “Guanine Island”) in double stranded DNA (ds-DNA).

Tuning the Coupling in Single-Molecule Heterostructures: DNA-Programmed and Reconfigurable Carbon Nanotube-Based Nanohybrids

Herein a strategy is presented for the assembly of both static and stimuli-responsive single-molecule heterostructures, where the distance and electronic coupling between an individual functional nanomoiety and a carbon nanostructure are tuned via the use of DNA linkers. As proof of concept, the formation of 1:1 nanohybrids is controlled, where single quantum dots (QDs) are tethered to the ends of individual carbon nanotubes (CNTs) in solution with DNA interconnects of different lengths. Photoluminescence investigations-both in solution and at the single-hybrid level-demonstrate the electronic coupling between the two nanostructures; notably this is observed to progressively scale, with charge transfer becoming the dominant process as the linkers length is reduced. Additionally, stimuli-responsive CNT-QD nanohybrids are assembled, where the distance and hence the electronic coupling between an individual CNT and a single QD are dynamically modulated via the addition and removal of potassium (K+) cations; the system is further found to be sensitive to K+ concentrations from 1 pM to 25 × 10-3 m. The level of control demonstrated here in modulating the electronic coupling of reconfigurable single-molecule heterostructures, comprising an individual functional nanomoiety and a carbon nanoelectrode, is of importance for the development of tunable molecular optoelectronic systems and devices.

A chemiluminescence biosensor for the detection of thrombin based on the aptamer composites

An efficient, rapid, simple and ultrasensitive chemiluminescence (CL) approach was proposed for thrombin detection based on the aptamer-thrombin recognition. The aptamer composites were synthesized in this work using graphene oxide (GO) as the backing material. The thrombin was adsorbed on the aptamer composites based on the aptamer-thrombin recognition. Thus, thrombin could be quantified by the difference value of the CL intensity between supernate of the sample and the mixture which composed of thrombin and coexisted substances. The CL intensity exhibits a stable response to thrombin over a concentration range from 2.5×10^-10 to 1×10^-9mol·L^-1 with a detection limit as low as 8.3×10^-11mol·L^-1, the relative standard deviation (RSD) was found to be 4.9% for 11 determinations of 1.25×10^-9mol·L^-1 thrombin. Finally, the applicability of the method was verified by applying to serum samples. The recoveries were in the range of 90.3-101.0% with RSD of 2.6-3.2%.

Conformational Changes of Enzymes and Aptamers Immobilized on Electrodes

Conformation constitutes a vital property of biomolecules, especially in the cases of enzymes and aptamers, and is essential in defining their molecular recognition ability. When biomolecules are immobilized on electrode surfaces, it is very important to have a control on all the possible conformational changes that may occur, either upon the recognition of their targets or by undesired alterations. Both enzymes and aptamers immobilized on electrodes are susceptible to conformational changes as a response to the nature of the charge of the surface and of the surrounding environment (pH, temperature, ionic strength, etc.). The main goal of this review is to analyze how the conformational changes of enzymes and aptamers immobilized on electrode surfaces have been treated in reports on biosensors and biofuel cells. This topic was selected due to insufficient information found on the actual conformational changes involved in the function of these bioelectrochemical devices despite its importance.