An “Iceberg” Coating Preserves Bulk Hydration Dynamics in Aqueous PEG Solutions

The explicit role of interfacial hydration during polyethylene glycol induced lipid fusion: a THz spectroscopic investigation

While the phenomenon of excipient mediated membrane fusion has been studied widely, the inherent role of interfacial hydration involved in the process has mostly remained unaddressed. Here we report the experimental validation of the fact that PEG-induced membrane fusion is associated with the dehydration of the membrane(s). We explore the explicit hydration behavior at three different lipids (DOPC, POPC and DPPC) membranes with different aliphatic tails as they undergo fusogenic transition in the presence of PEG of average molecular weight of 4000 using THz-FTIR spectroscopy in the frequency window of 1.5-13.5 THz. Dynamic light scattering and electron microscopic measurements confirm the formation of different intermediate steps of the liposomes during the fusion process: bilayer aggregation, destabilization and finally lipid fusion. We observe that membrane hydration follows a systematic trend with the lipid specificity as the fusion process sets in.

Roles of interfacial water states on advanced biomedical material design

When biomedical materials come into contact with body fluids, the first reaction that occurs on the material surface is hydration; proteins are then adsorbed and denatured on the hydrated material surface. The amount and degree of denaturation of adsorbed proteins affect subsequent cell behavior, including cell adhesion, migration, proliferation, and differentiation. Biomolecules are important for understanding the interactions and biological reactions of biomedical materials to elucidate the role of hydration in biomedical materials and their interaction partners. Analysis of the water states of hydrated materials is complicated and remains controversial; however, knowledge about interfacial water is useful for the design and development of advanced biomaterials. Herein, we summarize recent findings on the hydration of synthetic polymers, supramolecular materials, inorganic materials, proteins, and lipid membranes. Furthermore, we present recent advances in our understanding of the classification of interfacial water and advanced polymer biomaterials, based on the intermediate water concept.

Correlating the Local and Global Dynamics of an Enzyme in the Crowded Milieu

Enzymes are dynamic biological macromolecules, with their catalytic function(s) being largely influenced by the changes in local fluctuations of amino acid side chains as well as global structural modulations that the enzyme undergoes. Such local and global motions can be highly affected inside the crowded physiological interior of the cell. Here, we have addressed the role of dynamic structural flexibility in affecting the activation energy barrier of a flexible multidomain enzyme adenylate kinase (AK3L1, UniProtKB: Q9UIJ7). Activation energy profiles of both local (at three different sites along the polypeptide backbone) and global dynamics of the enzyme have been monitored using solvation studies on the subnanosecond time scale and tryptophan quenching studies over the temperature range of 278-323 K, respectively, under crowded conditions (Ficoll 70, Dextran 40, Dextran 70, and PEG 8). This study not only provides the site-specific mapping of dynamics but reveals that the activation energies associated with these local motions undergo a significant decrease in the presence of macromolecular crowders, providing new insights into how crowding affects internal protein dynamics. The crowded scenario also aids in enhancing the coupling between the local and global motions of the enzyme. Moreover, select portions/regions of the enzyme when taken together can well mirror the overall dynamics of the biomolecule, showing possible energy hotspots along the polypeptide backbone.

Hydrogen-Bonded Structure of Water in the Loop of Anchored Polyrotaxane Chain Controlled by Anchoring Density

Hydrogen-bonded network of water surrounding polymers is expected to be one of the most relevant factors affecting biocompatibility, while the specific hydrogen-bonded structure of water responsible for biocompatibility is still under debate. Here we study the hydrogen-bonded structure of water in a loop-shaped poly(ethylene glycol) chain in a polyrotaxane using synchrotron soft X-ray emission spectroscopy. By changing the density of anchoring molecules, hydrogen-bonded structure of water confined in the poly(ethylene glycol) loop was identified. The XES profile of the confined water indicates the absence of the low energy lone-pair peak, probably because the limited space of the polymer loop entropically inhibits the formation of tetrahedrally coordinated water. The volume of the confined water can be changed by the anchoring density, which implies the ability to control the biocompatibility of loop-shaped polymers.

Linear Polyglycerol for N-terminal-selective Modification of Interleukin-4

Polymer conjugation to biologics is of key interest to the pharmaceutical industry for the development of potent and long acting biotherapeutics, with poly(ethylene glycol) (PEG) being the gold standard. Within the last years, unwanted PEG-related side effects (immunological reactions, antibody formation) arose, therefore creating several attempts to establish alternative polymers with similar potential to PEG. In this article, we synthesized N-terminal bioconjugates of the potential therapeutic human interleukin-4 (hIL-4 WT) with linear polyglycerol (LPG) of 10 and 40 kDa and compared it with its PEG analogs of same nominal weights. Polyglycerol is a highly hydrophilic polymer with good biocompatibility and therefore represents an alternative polymer to PEG. Both polymer types resulted in similar conjugation yields, comparable hydrodynamic sizes and an unaltered secondary structure of the protein after modification. LPG- and PEG-bioconjugates remained stable in human plasma, whereas binding to human serum albumin (HSA) decreased after polymer modification. Furthermore, only minor differences in bioactivity were observed between LPG- and PEG-bioconjugates of same nominal weights. The presented findings are promising for future pharmacokinetic evaluation of hIL-4-polymer bioconjugates.

Understanding enzyme behavior in a crowded scenario through modulation in activity, conformation and dynamics

Macromolecular crowding, inside the physiological interior, modulates the energy landscape of biological macromolecules in multiple ways. Amongst these, enzymes occupy a special place and hence understanding the function of the same in the crowded interior is of utmost importance. In this study, we have investigated the manner in which the multidomain enzyme, AK3L1 (PDB ID: 1ZD8), an isoform of adenylate kinase, has its features affected in presence of commonly used crowders (PEG 8, Dextran 40, Dextran 70, and Ficoll 70). Michaelis Menten plots reveal that the crowders in general enhance the activity of the enzyme, with the K_m and V_max values showing significant variations. Ficoll 70, induced the maximum activity for AK3L1 at 100 g/L, beyond which the activity reduced. Ensemble FRET studies were performed to provide insights into the relative domain (LID and CORE) displacements in presence of the crowders. Solvation studies reveal that the protein matrix surrounding the probe CPM (7-diethylamino-3-(4-maleimido-phenyl)-4-methylcoumarin) gets restricted in presence of the crowders, with Ficoll 70 providing the maximum rigidity, the same being linked to the decrease in the activity of the enzyme. Through our multipronged approach, we have observed a distinct correlation between domain displacement, enzyme activity and associated dynamics. Thus, keeping in mind the complex nature of enzyme activity and the surrounding bath of dense soup that the biological entity remains immersed in, indeed more such approaches need to be undertaken to have a better grasp of the "enzymes in the crowd".

Lifetime-Associated Two-Dimensional Infrared Spectroscopy Reveals the Hydrogen-Bond Structure of Supercooled Water in Soft Confinement

We demonstrate a method to address the problem of spectral overlap in multidimensional vibrational spectroscopy and use it to investigate supercooled aqueous sorbitol solutions. The absence of crystallization in these solutions has been attributed to "soft" confinement of water in subnanometer voids in the sorbitol matrix, but the details of the hydrogen-bond structure are still largely unknown. 2D-IR spectroscopy of the OH-stretch mode is an excellent tool to investigate hydrogen bonding, but in this case it seems difficult because of the overlapping water and sorbitol contributions to the 2D-IR spectrum. Using the difference in OH-stretch lifetimes of water and sorbitol we can cleanly separate these contributions. Surprisingly, the separated 2D-IR spectra show that the hydrogen-bond disorder of soft-confined water is independent of temperature and decoupled from its orientational order. We believe the approach we use to separate overlapping 2D-IR spectra will enhance the applicability of 2D-IR spectroscopy to study multicomponent systems.

Direct comparison of amplitude and geometric measures of spectral inhomogeneity using phase-cycled 2D-IR spectroscopy

Two-dimensional infrared (2D-IR) spectroscopy provides access to equilibrium dynamics with the extraction of the frequency-fluctuation correlation function (FFCF) from the measured spectra. Several different methods of obtaining the FFCF from experimental spectra, such as the center line slope (CLS), ellipticity, phase slope, and nodal line slope, all depend on the geometrical nature of the 2D line shape and necessarily require spectral extent in order to achieve a measure of the FFCF. Amplitude measures, on the other hand, such as the inhomogeneity index, rely only on signal amplitudes and can, in principle, be computed using just a single point in a 2D spectrum. With a pulse shaper-based 2D-IR spectrometer, in conjunction with phase cycling, we separate the rephasing and nonrephasing signals used to determine the inhomogeneity index. The same measured data provide the absorptive spectrum, needed for the CLS. Both methods are applied to two model molecular systems: tungsten hexacarbonyl (WCO₆) and methylcyclopentadienyl manganese tricarbonyl [Cp'Mn(CO)₃, MCMT]. The three degenerate IR modes of W(CO)₆ lack coherent modulation or noticeable intramolecular vibrational redistribution (IVR) and are used to establish a baseline comparison. The two bands of the MCMT tripod complex include intraband coherences and IVR as well as likely internal torsional motion on a few-picosecond time scale. We find essentially identical spectral diffusion, but faster, non-equilibrium dynamics lead to differences in the FFCFs extracted with the two methods. The inhomogeneity index offers an advantage in cases where spectra are complex and energy transfer can mimic line shape changes due to frequency fluctuations.

Polyglycerol for Half-Life Extension of Proteins-Alternative to PEGylation?

Since several decades, PEGylation is known to be the clinical standard to enhance pharmacokinetics of biotherapeutics. In this study, we introduce polyglycerol (PG) of different lengths and architectures (linear and hyperbranched) as an alternative polymer platform to poly(ethylene glycol) (PEG) for half-life extension (HLE). We designed site-selective N-terminally modified PG-protein conjugates of the therapeutic protein anakinra (IL-1ra, Kineret) and compared them systematically with PEG analogues of similar molecular weights. Linear PG and PEG conjugates showed comparable hydrodynamic sizes and retained their secondary structure, whereas binding affinity to IL-1 receptor 1 decreased with increasing polymer length, yet remained in the low nanomolar range for all conjugates. The terminal half-life of a 40 kDa linear PG-modified anakinra was extended 4-fold compared to the unmodified protein, close to its PEG analogue. Our results demonstrate similar performances of PEG- and PG-anakinra conjugates and therefore highlight the outstanding potential of polyglycerol as a PEG alternative for half-life extension of biotherapeutics.

Hydrophilic dangling chain interfacial segregation in polyurethane networks at aqueous interfaces and its underlying mechanisms: molecular dynamics simulations

Polymer networks with hydrophilic dangling chains are ideal candidates for many submerged applications, e.g., protein non-adhesive coatings with non-fouling behavior. The dangling chains segregate from the polymer network towards the water and form a brush-like structure at the interface. Several factors such as the polymer network structure, dangling chain length, and water/dangling chain interaction may all affect the interfacial performance of the polymer. Therefore, we employed a Martini based coarse-grained (CG) molecular dynamics (MD) simulation to elucidate the influences of the abovementioned parameters on dangling chain interfacial segregation. We built up several polyurethane (PU) networks based on poly(tetra methylene glycol) (PTMG), as a macrodiol, and methoxy poly(ethylene glycol) (mPEG), as a dangling chain, with varying molecular weights. We found out that the macrodiol/dangling chain length ratio considerably smaller than one impedes the migration of dangling chains towards the water interface, while the dangling chain hydrophilicity and length determine the polymer interfacial layer density/thickness. Then, we artificially changed the dangling chain affinity to water from an intermediate to a very attractive water/dangling chain interaction. We justified that a brush-like structure forms in two consecutive steps: first, a longitudinal, and then a lateral migration of dangling chains in water. The latter step results in a uniform interfacial layer over the polymer interface that mainly occurs in the case of the attractive water/dangling chain interaction.

Structural peculiarities of lysozyme - PLURONIC complexes at the aqueous-air and liquid-liquid interfaces and in the bulk of aqueous solution

Interaction between proteins and synthetic polymers that represent a perspective potential in drug delivery or/and already used in medicine plays a key role in biological functioning of both molecules along with a system as a whole. In present study association between hen egg white lysozyme and Pluronic triblock-copolymers (L121, P123 and F127) in the bulk of the solution as well as at the aqueous-air and liquid-liquid interfaces was analyzed by means of spectroscopic and radiochemical assay. In protein-Pluronic complexes lysozyme keeps the secondary structure (CD and SAXS data results), while fluorescence and UV-analysis indicates changes in the local surrounding of fluorophoric amino acid residues. Radiochemical assay in combination with molecular docking reveals the formation of the complexes, in which proline residues turned to the interface between water and hydrophobic medium.

Formation of molten globule state in horse heart cytochrome c under physiological conditions: Importance of soft interactions and spectroscopic approach in crowded milieu

To understand protein folding problem under physiological condition, usually taken as dilute aqueous buffer at pH 7.0 and 25 °C, knowledge of properties of folding intermediates is important, such as molten globule (MG). We observed that polyethylene glycol 400 Da (PEG 400) induces molten globule state conformation in cytochrome c at pH 7.0 and 25 °C. This PEG-induced MG state has: (i) native tertiary structure partially perturbed, (ii) unperturbed native secondary structure, (iii) newly exposed hydrophobic patches, and (iv) has 1.58 times more hydrodynamic volume than that of the native protein. Isothermal titration calorimetry and docking studies showed specific binding between PEG 400 and cytochrome c. The study delineates that PEG-protein interactions are more complex than the excluded-volume. The soft interactions need to be seriously studied in crowding milieu that leads to destabilization of protein and overcome stabilizing exclusion volume effect. This study not only can help in unraveling the mystery of steps involved in the proper folding of proteins to solve the massively complicated problems of protein folding but also provides novel insights towards importance of structural change in proteins inside cell where intermediate states of protein import-export easily via membranes rather than native form of proteins.

Silicon Nanotubes as Potential Therapeutic Platforms

Silicon nanotubes (SiNTs) with unique well-defined structural morphologies have been successfully fabricated and recognized as a novel architecture in the nanoscale Si family. While the typical dendritic microstructure of mesoporous silicon prepared anodically has been exploited previously for therapeutics and biosensing, our status of utilizing SiNTs in this regard is still in its infancy. In this review, we focus on the fundamental properties of such nanotubes relevant to therapeutic applications, beginning with a description of our ability to sensitively tune the structure of a given SiNT through synthetic control and the associated detailed in vitro dissolution behavior (reflecting biodegradability). Emphasis is also placed here on the range of functional moieties available to attach to the surface of SiNTs through a summary of current studies involving surface functionalization and strategies that facilitate conjugation with molecules of interest for multiple purposes, including cell labeling, nucleotide attachment, and scaffolding of therapeutic metallic nanoparticles. Experiments addressing our ability to load the interior of a given nanotube with species capable of providing magnetic field-assisted drug delivery are also briefly described. Given the range of diverse properties demonstrated to date, we believe the future to be quite promising for employing SiNTs as therapeutic platforms.

On the origin of the extremely different solubilities of polyethers in water

The solubilities of polyethers are surprisingly counter-intuitive. The best-known example is the difference between polyethylene glycol ([-CH₂-CH₂-O-]_n) which is infinitely soluble, and polyoxymethylene ([-CH₂-O-]_n) which is completely insoluble in water, exactly the opposite of what one expects from the C/O ratios of these molecules. Similar anomalies exist for oligomeric and cyclic polyethers. To solve this apparent mystery, we use femtosecond vibrational and GHz dielectric spectroscopy with complementary ab initio calculations and molecular dynamics simulations. We find that the dynamics of water molecules solvating polyethers is fundamentally different depending on their C/O composition. The ab initio calculations and simulations show that this is not because of steric effects (as is commonly believed), but because the partial charge on the O atoms depends on the number of C atoms by which they are separated. Our results thus show that inductive effects can have a major impact on aqueous solubilities.

Solvent Quality Controls Macromolecular Structural Dynamics of a Dendrimeric Hydrogenase Model

We report a spectroscopic investigation of the ultrafast dynamics of the second-generation poly(aryl ether) dendritic hydrogenase model using two-dimensional infrared (2D-IR) spectroscopy to probe the metal carbonyl vibrations of the dendrimer and a reference small molecule, [Fe(μ-S)(CO)₃]₂. We find that the structural dynamics of the dendrimer are reflected in a slow phase of the spectral diffusion, which is absent from [Fe(μ-S)(CO)₃]_2, and we relate the slow phase to the quality of the solvent for poly(aryl ether) dendrimers. We observe a solvent-dependent modulation of the initial phase of vibrational relaxation of the carbonyl groups, which we attribute to an inhibition of solvent assistance in the intramolecular vibrational redistribution process for the dendrimer. There is also a clear solvent dependence of the vibrational frequencies of both the dendrimer and [Fe(μ-S)(CO)₃]₂. Our data represent the first 2D-IR study of a dendritic complex and provide insight into the solvent dependence of molecular conformation in solution and the ultrafast dynamics of moderately sized, conformationally mobile compounds.

Exploring Dynamics and Structure of Biomolecules, Cryoprotectants, and Water Using Molecular Dynamics Simulations: Implications for Biostabilization and Biopreservation

Successful stabilization and preservation of biological materials often utilize low temperatures and dehydration to arrest molecular motion. Cryoprotectants are routinely employed to help the biological entities survive the physicochemical and mechanical stresses induced by cold or dryness. Molecular interactions between biomolecules, cryoprotectants, and water fundamentally determine the outcomes of preservation. The optimization of assays using the empirical approach is often limited in structural and temporal resolution, whereas classical molecular dynamics simulations can provide a cost-effective glimpse into the atomic-level structure and interaction of individual molecules that dictate macroscopic behavior. Computational research on biomolecules, cryoprotectants, and water has provided invaluable insights into the development of new cryoprotectants and the optimization of preservation methods. We describe the rapidly evolving state of the art of molecular simulations of these complex systems, summarize the molecular-scale protective and stabilizing mechanisms, and discuss the challenges that motivate continued innovation in this field.

How Molecular Crowding Differs from Macromolecular Crowding: A Femtosecond Mid-Infrared Pump-Probe Study

Crowding is an inherent property of living systems in which biochemical processes occur in highly concentrated solutions of various finite-sized species of both low (molecular crowding) and high (macromolecular crowding) molecular weights. Is molecular crowding fundamentally different from macromolecular crowding? To answer this question, we use a femtosecond mid-infrared pump-probe technique with three vibrational probes in molecular (diethylene glycol) and macromolecular (polyethylene glycol) solutions. In less crowded media, both molecular and macromolecular crowders fail to affect the dynamics of interstitial bulk-like water molecules and those at the crowder/water interface. In highly crowded media, interstitial water dynamics strongly depends on molecular crowding, but macromolecular crowding does not alter the bulk-like hydration dynamics and has a modest crowding effect on water at the crowder/water interface. The results of this study provide a molecular level understanding of the structural and dynamic changes to water and the water-mediated cross-linking of crowders.

Hydrophobic Collapse in N-Methylacetamide-Water Mixtures

Aqueous N-methylacetamide solutions were investigated by polarization-resolved pump–probe and 2D infrared spectroscopy (2D IR), using the amide I mode as a reporter. The 2D IR results are compared with molecular dynamics simulations and spectral calculations to gain insight into the molecular structures in the mixture. N-Methylacetamide and water molecules tend to form clusters with “frozen” amide I dynamics. This is driven by a hydrophobic collapse as the methyl groups of the N-methylacetamide molecules cluster in the presence of water. Since the studied system can be considered as a simplified model for the backbone of proteins, the present study forms a convenient basis for understanding the structural and vibrational dynamics in proteins. It is particularly interesting to find out that a hydrophobic collapse as the one driving protein folding is observed in such a simple system.

Effect of Osmolytes on the Conformational Behavior of a Macromolecule in a Cytoplasm-like Crowded Environment: A Femtosecond Mid-IR Pump-Probe Spectroscopy Study

Osmolytes found endogenously in almost all living beings play an important role in regulating cell volume under harsh environment. Here, to address the longstanding questions about the underlying mechanism of osmolyte effects, we use femtosecond mid-IR pump-probe spectroscopy with two different IR probes that are the OD stretching mode of HDO and the azido stretching mode of azido-derivatized poly(ethylene glycol) dimethyl ether (PEGDME). Our experimental results show that protecting osmolytes bind strongly with water molecules and dehydrate polymer surface, which results in promoting intramolecular interactions of the polymer. By contrast, urea behaves like water molecules without significantly disrupting water H-bonding network and favors extended and random-coil segments of the polymer chain by directly participating in solvation of the polymer. Our findings highlight the importance of direct interaction between urea and macromolecule, while protecting osmolytes indirectly affect the macromolecule through enhancing the water-osmolyte interaction in a crowded environment, which is the case that is often encountered in real biological systems.