A New Mixing of Nonlocal Exchange and Nonlocal Correlation with Multiconfiguration Pair-Density Functional Theory

Universal Framework for Multiconfigurational DFT

Strong correlation remains a significant challenge for DFT with no satisfying solutions found yet within the standard Kohn-Sham framework. Instead, for decades, a number of different approaches have been suggested to combine the accuracy of multiconfigurational methods with the efficiency of DFT. In this article, we demonstrate that many of these methods are or would be significantly improved by being reformulated as variants of multiconfigurational pair-density functional theory (MC-PDFT). This work presents the first implementation of these methods within the recently proposed variational formulation of MC-PDFT. It also provides for the first time a systematic comparison of their accuracy across representative examples of strongly correlated systems. By analyzing their accuracy and formal properties, we provide design guidelines to inform the development of future functionals.

Automated Multireference Vertical Excitations for Transition-Metal Compounds

Excited states of transition metal complexes are generally strongly correlated due to the near-degeneracy of the metal d orbitals. Consequently, electronic structure calculations of such species often necessitate multireference approaches. However, widespread use of multireference methods is hindered due to the active space selection problem, which has historically required system-specific chemical knowledge and a trial-and-error approach. Here, we address this issue with an automated method combining the approximate pair coefficient (APC) scheme for estimating orbital entropies with the discrete variational selection (DVS) approach for evaluating active space quality. We apply DVS-APC to the calculation of 67 vertical excitations in transition metal diatomics as well as to two larger complexes. We show DVS-APC generated active spaces yield NEVPT2 mean absolute errors of 0.18 eV, in line with previous accuracies obtained for organic systems, but larger than errors achieved with hand-selected active spaces (0.14 eV). If instead of using DVS we identify the best results from our trial wave functions, we find improved performance (mean absolute error of 0.1 eV) over the manually selected results. We highlight this deviation between DVS and hand selected active spaces as a possible measure of bias introduced when hand selecting active spaces. However, we find that multiconfiguration pair-density functional theory (MC-PDFT) using the tPBE and tPBE0 functionals is roughly 0.15 eV less accurate than NEVPT2 across this class of diatomic systems, potentially accounting for the decreased performance of DVS-APC, which uses MC-PDFT energies to select between active spaces. We also showcase an ability to "down-sample" the DVS-APC wave functions using natural orbital occupancies to achieve smaller minimal active spaces which retain the accuracy of the larger starting active spaces. Finally, DVS-APC and tPBE0 are proven to be effective when applied to modeling excited states in two larger transition metal complexes, suggesting that the transition metal diatomics may be a particular outstanding challenge for DVS-APC and MC-PDFT approaches.

A Density Functional Valence Bond Study on the Excited States

The accurate description of excited states is crucial for the development of electronic structure theory. In addition to determining excitation energies, strong state interactions arise when electronic states with the same symmetry are degenerate or nearly degenerate, often requiring a multi-state treatment. These strong correlation effects and state interactions can be effectively handled by the Hamiltonian matrix correction-based density functional valence bond (hc-DFVB) method, a multi-reference density functional theory capable of accurately describing electronic state interactions. In this paper, we explore the low-lying excited states of four isoelectronic systems (C2H, CN, CO+, BO) using valence bond methods, including the valence bond self-consistent field (VBSCF) and hc-DFVB methods. Our results show that the hc-DFVB method provides significantly better excitation energies compared to VBSCF. Furthermore, hc-DFVB can reliably predict the correct ordering of excited states, whereas VBSCF shows some ordering inconsistencies. By categorizing the VB structures into groups based on point group symmetry, we can extract the key structural contributions and bonding pictures of each state from the weight distribution of these groups. Additionally, we study the potential energy curves for lithium fluoride (LiF) and a mixed-valence spiro cation, demonstrating the superior performance of hc-DFVB when applied to the study of near-degenerate excited states in the avoided crossing region.

A hybrid meta on-top functional for multiconfiguration pair-density functional theory

Multiconfiguration pair-density functional theory (MC-PDFT) was proposed a decade ago, but it is still in the early stage of density functional development. MC-PDFT uses functionals that are called on-top functionals; they depend on the density and the on-top pair density. Most MC-PDFT calculations to date have been unoptimized translations of generalized gradient approximations (GGAs) of Kohn-Sham density functional theory (KS-DFT). A hybrid MC-PDFT has also been developed, in which one includes a fraction of the complete active space self-consistent-field wave function energy in the total energy. Meta-GGA functionals, which use kinetic-energy densities in addition to GGA ingredients, have shown higher accuracy than GGAs in KS-DFT, yet the translation of meta-GGAs has not been previously proposed for MC-PDFT. In this paper, we propose a way to include kinetic energy density in a hybrid on-top functional for MC-PDFT, and we optimize the parameters of the resulting functional by training with a database developed as part of the present work that contains a wide variety of systems with diverse characters. The resulting hybrid meta functional is called the MC23 functional. We find that MC23 has improved performance as compared to KS-DFT functionals for both strongly and weakly correlated systems. We recommend MC23 for future MC-PDFT calculations.

DC24: A new density coherence functional for multiconfiguration density-coherence functional theory

In this study, we explored several alternative functional forms to construct more accurate and more physical density coherence (DC) functionals for multiconfiguration density-coherence functional theory. Each functional is parameterized against the same database as used in our previous work. The best DC functional, which is called DC24, has a more physical interpretation, and-as a side benefit-it also has a mean unsigned error of 1.73 kcal/mol, which is a 9% improvement as compared to the previous functional. The article also contains a new definition of the unpaired electron density, which may be useful in other contexts as well.

A cross-entropy corrected hybrid multiconfiguration pair-density functional theory for complex molecular systems

Hybrid density functionals, such as B3LYP and PBE0, have achieved remarkable success by substantially improving over their parent methods, namely Hartree-Fock and the generalized gradient approximation, and generally outperforming the second-order Møller-Plesset perturbation theory (MP2) that is more expensive. Here, we extend the linear scheme of hybrid multiconfiguration pair-density functional theory (HMC-PDFT) by incorporating a cross-entropy ingredient to balance the description of static and dynamic correlation effects, leading to a consistent improvement on both exchange and correlation energies. The B3LYP-like translated on-top functional (tB4LYP) developed along this line not only surpasses the accuracy of its parent methods, the complete active space self-consistent field (CASSCF) and the original MC-PDFT functionals (tBLYP and tB3LYP), but also outperforms the widely used complete active space second-order perturbation theory (CASPT2). Remarkably, while remaining satisfactory for general purpose, tB4LYP shows superior accuracy for challenging cases like the Cr2 dissociation and the associated low-lying vibrational energies, the ethylene torsional rotation and the ethyne diabatic colinear dissociations, with the significantly lower computational cost than CASPT2.

Improving the Accuracy in the Prediction of Transition-Metal Spin-State Energetics Using a Robust Variation-Based Approach: Density Functional Theory, CASPT2 and MC-PDFT Applied to the Case Study of Tris-Diimine Fe(II) Complexes

Designing ligands for transition metal complexes with a specified low-spin, high-spin or spin-crossover behavior is challenging. A major advance was recently made by Phan et al. [J. Am. Chem. Soc. 2017, 139, 6437-6447] who showed that the spin state of a homoleptic tris-diimine Fe(II) complex can be predicted from the N-N distance in the free diimine. They could thus predict the change in magnetic behavior on passing from the complexes of 2,2'-bipyridine (bpy), 2,2'-biimidazole (bim) and 2,2'-bis-2-imidazoline (bimz) ligands to those obtained with the modified analogs 4,5-diazafluoren-9-one (dafo), 1,1'-(α,α'-o-xylyl)-2,2'-bisimidazole (xbim) and 2,3,5,6,8,9-hexahydrodiimidazo[1,2-a:2', 1'-c]pyrazine (etbimz), respectively. Theoretically, the challenge lies in the accurate determination of the HS-LS zero-point energy difference ΔEHL°. The issue can be circumvented by using a variation-based approach, wherein ΔEHL° is not directly evaluated but obtained from the estimate of its variation Δ(ΔEHL°) in series of related systems, which include one whose ΔEHL° is accurately known [Phys. Chem. Chem. Phys. 2013, 15, 3752-3763; J. Phys. Chem. A 2022, 126, 6221-6235]. In this study, density functional theory (DFT), second-order multireference perturbation theory in its CASPT2 formulation, multiconfigurational pair DFT (MC-PDFT) and its hybrid formulation (HMC-PDFT) have been applied to the determination of Δ(ΔEHL°) in the pairs of complexes ( [ F e ( b p y ) 3 ] 2 + , [ F e ( d a f o ) 3 ] 2 + ) , ( [ F e ( b i m ) 3 ] 2 + , [ F e ( x b i m ) 3 ] 2 + ) and ( [ F e ( b i m z ) 3 ] 2 + , [ F e ( e t b i m z ) 3 ] 2 + ) . In DFT, we used several semilocal functionals and their global hybrids, as well as their D2, D3, D3BJ and D4 dispersion-corrected forms; and in MC-PDFT, different translated and fully translated functionals. The results are consistent with one another and in very good agreement with experiments. They show small to vanishing dependence on key details of the methods used: namely, the exact-exchange contribution to global hybrids; the ionization potential-electron affinity shift and basis sets used in the CASPT2 calculations; and the active spaces employed for the CASSCF wave functions used in the MC-PDFT and HMC-PDFT calculations. Insights into the change in the spin-state energetics accompanying the ligand exchanges were gained through a complexation energy analysis. Using the accurate CCSD(T) estimate of the HS-LS adiabatic energy difference in [ F e ( N C H ) 6 ] 2 + [J. Chem. Theory Comput. 2012, 8, 4216-4231], the Δ(ΔEHL°)-approach has been applied to the determination of ΔEHL° in the diimine complexes. The CASPT2 and DFT-D2 methods only give results in agreement with experiments. This suggests for the other methods a limitation in their treatment of dispersion which prevents them from accurately describing the spin-state energetics change accompanying the passing from [ F e ( N C H ) 6 ] 2 + with the tetragonal arrangement of its nitrile ligands to the tris-diimine complexes with the trigonal packing of their bulkier ligands.

A homoleptic Fe(iv) ketimide complex with a low-lying excited state

The reaction of 4 equiv. of Li(N[double bond, length as m-dash]C( t Bu)Ph) with FeIICl2 results in isolation of [Li(Et2O)]2[FeII(N[double bond, length as m-dash]C( t Bu)Ph)4] (1), in good yields. The reaction of 1 with 1 equiv. of I2 leads to formation of [FeIV(N[double bond, length as m-dash]C( t Bu)Ph)4] (2), in moderate yields. 57Fe Mössbauer spectroscopy confirms the Fe(iv) oxidation state of 2, and X-ray crystallography reveals that 2 has a square planar coordination geometry along with several intramolecular H⋯C interactions. Furthermore, SQUID magnetometry indicates a small magnetic moment at room temperature, suggestive of an accessible S = 1 state. Both density functional theory and multiconfigurational calculations were done to elucidate the nature of the ground state. Consistent with the experimental results, the ground state was found to be an S = 0 state with an S = 1 excited state close in energy.

Perspective: multi-configurational methods in bio-inorganic chemistry

Transition metal ions play crucial roles in the structure and function of numerous proteins, contributing to essential biological processes such as catalysis, electron transfer, and oxygen binding. However, accurately modeling the electronic structure and properties of metalloproteins poses significant challenges due to the complex nature of their electronic configurations and strong correlation effects. Multiconfigurational quantum chemistry methods are, in principle, the most appropriate tools for addressing these challenges, offering the capability to capture the inherent multi-reference character and strong electron correlation present in bio-inorganic systems. Yet their computational cost has long hindered wider adoption, making methods such as density functional theory (DFT) the method of choice. However, advancements over the past decade have substantially alleviated this limitation, rendering multiconfigurational quantum chemistry methods more accessible and applicable to a wider range of bio-inorganic systems. In this perspective, we discuss some of these developments and how they have already been used to answer some of the most important questions in bio-inorganic chemistry. We also comment on ongoing developments in the field and how the future of the field may evolve.

Chelate Complexes of 3d Transition Metal Ions─A Challenge for Electronic-Structure Methods?

Different electronic-structure methods were assessed for their ability to predict two important properties of the industrially relevant chelating agent nitrilotriacetic acid (NTA): its selectivity with respect to six different first-row transition metal ions and the spin-state energetics of its complex with Fe(III). The investigated methods encompassed density functional theory (DFT), the random phase approximation (RPA), coupled cluster (CC) theory, and the auxiliary-field quantum Monte Carlo (AFQMC) method, as well as the complete active space self-consistent field (CASSCF) method and the respective on-top methods: second-order N-electron valence state perturbation theory (NEVPT2) and multiconfiguration pair-density functional theory (MC-PDFT). Different strategies for selecting active spaces were explored, and the density matrix renormalization group (DMRG) approach was used to solve the largest active spaces. Despite somewhat ambiguous multi-reference diagnostics, most methods gave relatively good agreement with experimental data for the chemical reactions connected to the selectivity, which only involved transition-metal complexes in their high-spin state. CC methods yielded the highest accuracy followed by range-separated DFT and AFQMC. We discussed in detail that even higher accuracies can be obtained with NEVPT2, under the prerequisite that consistent active spaces along the entire chemical reaction can be selected, which was not the case for reactions involving Fe(III). A bigger challenge for electronic-structure methods was the prediction of the spin-state energetics, which additionally involved lower spin states that exhibited larger multi-reference diagnostics. Conceptually different, typically accurate methods ranging from CC theory via DMRG-NEVPT2 in combination with large active spaces to AFQMC agreed well that the high-spin state is energetically significantly favored over the other spin states. This was in contrast to most DFT functionals and RPA which yielded a smaller stabilization and some common DFT functionals and MC-PDFT even predicting the low-spin state to be energetically most favorable.

Variational Pair-Density Functional Theory: Dealing with Strong Correlation at the Protein Scale

Multiconfigurational pair-density functional theory (MC-PDFT) offers a promising solution to the challenges faced by traditional density functional theory (DFT) in addressing molecular systems containing transition metals, open-shells, or strong correlations in general. By utilizing both the density and on-top pair-density, MC-PDFT can make use of a more flexible multiconfigurational wave function to capture the necessary static correlation, while the pair-density functional also includes the effect of dynamic correlation. So far, MC-PDFT has been used after a multiconfigurational self-consistent field (MCSCF) step, using the orbitals and configuration interaction coefficients from the converged MCSCF wave function to compute PDFT energies and properties. Here, instead, we propose to perform a direct optimization of the wave function using the pair-density functionals, resulting in a variational formulation of MC-PDFT. We derive the expressions for the wave function gradient and illustrate their similarity to standard MCSCF equations. Furthermore, we illustrate the accuracy on a set of singlet-triplet gaps as well as dissociation curves. Our findings highlight one of MC-PDFT's standout features: a reduced dependency on the active space size compared to conventional multiconfigurational wave function methodologies. Additionally, we show that the computational cost of MC-PDFT is potentially lower than MCSCF and often on-par with standard Kohn-Sham DFT, which is demonstrated by performing a MC-PDFT calculation of the entire ferredoxin protein with 1447 atoms and nearly 12 000 basis functions.

Variational Active Space Selection with Multiconfiguration Pair-Density Functional Theory

The selection of an adequate set of active orbitals for modeling strongly correlated electronic states is difficult to automate because it is highly dependent on the states and molecule of interest. Although many approaches have shown some success, no single approach has worked well in all cases. In light of this, we present the "discrete variational selection" (DVS) approach to active space selection, in which one generates multiple trial wave functions from a diverse set of systematically constructed active spaces and then selects between these wave functions variationally. We apply this DVS approach to 207 vertical excitations of small-to-medium-sized organic and inorganic molecules (with 3 to 18 atoms) in the QUESTDB database by (i) constructing various sets of active space orbitals through diagonalization of parametrized operators and (ii) choosing the result with the lowest average energy among the states of interest. This approach proves ineffective when variationally selecting between wave functions using the density matrix renormalization group (DMRG) or complete active space self-consistent field (CASSCF) energy but is able to provide good results when variationally selecting between wave functions using the energy of the translated PBE (tPBE) functional from multiconfiguration pair-density functional theory (MC-PDFT). Applying this DVS-tPBE approach to selection among state-averaged DMRG wave functions, we obtain a mean unsigned error of only 0.17 eV using hybrid MC-PDFT. This result matches that of our previous benchmark without the need to filter out poor active spaces and with no further orbital optimization following active space selection of the SA-DMRG wave functions. Furthermore, we find that DVS-tPBE is able to robustly and effectively select between the new SA-DMRG wave functions and our previous SA-CASSCF results.

Multiconfiguration Pair-Density Functional Theory for Vertical Excitation Energies in Actinide Molecules

Modeling actinides with electronic structure theories is challenging because these systems present a strong ligand field and metal-ligand covalency. We systematically investigate the effectiveness of pair-density functional theory (PDFT) for the calculation of vertical excitation energies in An(III), [AnIIICl6]3-, and [AnVIO2]2+ (An = U, Np, Pu, and Am). We compare the performance of PDFT, hybrid PDFT, and multistate PDFT with traditional active-space methods followed by perturbation theory, like multistate CASPT2, and with experimental data. Overall, multistate PDFT gives quantitative agreement with multistate CASPT2 at a significantly reduced computational cost.

The OpenMolcas Web: A Community-Driven Approach to Advancing Computational Chemistry

The developments of the open-source OpenMolcas chemistry software environment since spring 2020 are described, with a focus on novel functionalities accessible in the stable branch of the package or via interfaces with other packages. These developments span a wide range of topics in computational chemistry and are presented in thematic sections: electronic structure theory, electronic spectroscopy simulations, analytic gradients and molecular structure optimizations, ab initio molecular dynamics, and other new features. This report offers an overview of the chemical phenomena and processes OpenMolcas can address, while showing that OpenMolcas is an attractive platform for state-of-the-art atomistic computer simulations.

An Accurate Density Coherence Functional for Hybrid Multiconfiguration Density Coherence Functional Theory

We present hybrid multiconfiguration density coherence functional theory (HMC-DCFT), and we optimize a density coherence functional by parametrization against a diverse data set of 59 bond energies and 60 barrier heights. We compare the results to calculations on the same data set by CASSCF, CASPT2, six Kohn-Sham and hybrid Kohn-Sham exchange-correlation functionals, and three on-top functionals for pair-density functional theory (PDFT) and hybrid PDFT. The new functional has better accuracy than all compared methods.

Assessment of DFT functionals for a minimal nitrogenase [Fe(SH)4H]- model employing state-of-the-art ab initio methods

We have designed a [Fe(SH)4H]- model with the fifth proton binding either to Fe or S. We show that the energy difference between these two isomers (∆E) is hard to estimate with quantum-mechanical (QM) methods. For example, different density functional theory (DFT) methods give ∆E estimates that vary by almost 140 kJ/mol, mainly depending on the amount of exact Hartree-Fock included (0%-54%). The model is so small that it can be treated by many high-level QM methods, including coupled-cluster (CC) and multiconfigurational perturbation theory approaches. With extrapolated CC series (up to fully connected coupled-cluster calculations with singles, doubles, and triples) and semistochastic heat-bath configuration interaction methods, we obtain results that seem to be converged to full configuration interaction results within 5 kJ/mol. Our best result for ∆E is 101 kJ/mol. With this reference, we show that M06 and B3LYP-D3 give the best results among 35 DFT methods tested for this system. Brueckner doubles coupled cluster with perturbaitve triples seems to be the most accurate coupled-cluster approach with approximate triples. CCSD(T) with Kohn-Sham orbitals gives results within 4-11 kJ/mol of the extrapolated CC results, depending on the DFT method. Single-reference CC calculations seem to be reasonably accurate (giving an error of ∼5 kJ/mol compared to multireference methods), even if the D1 diagnostic is quite high (0.25) for one of the two isomers.

Density Matrix Embedding Using Multiconfiguration Pair-Density Functional Theory

We present a quantum embedding method for ground and excited states of extended systems that uses multiconfiguration pair-density functional theory (MC-PDFT) with densities provided by periodic density matrix embedding theory (pDMET). We compute local excitations in oxygen mono- and divacancies on a magnesium oxide (100) surface and find absolute deviations within 0.05 eV between pDMET using the MC-PDFT, denoted as pDME-PDFT, and the more expensive, nonembedded MC-PDFT approach. We further use pDME-PDFT to calculate local excitations in larger supercells for the monovacancy defect, for which the use of nonembedded MC-PDFT is prohibitively costly.

Linearized Pair-Density Functional Theory

Multiconfiguration pair-density functional theory (MC-PDFT) is a post-SCF multireference method that has been successful at computing ground- and excited-state energies. However, MC-PDFT is a single-state method in which the final MC-PDFT energies do not come from diagonalization of a model-space Hamiltonian matrix, and this can lead to inaccurate topologies of potential energy surfaces near locally avoided crossings and conical intersections. Therefore, in order to perform physically correct ab initio molecular dynamics with electronically excited states or to treat Jahn-Teller instabilities, it is necessary to develop a PDFT method that recovers the correct topology throughout the entire nuclear configuration space. Here we construct an effective Hamiltonian operator, called the linearized PDFT (L-PDFT) Hamiltonian, by expanding the MC-PDFT energy expression to first order in a Taylor series of the wave function density. Diagonalization of the L-PDFT Hamiltonian gives the correct potential energy surface topology near conical intersections and locally avoided crossings for a variety of challenging cases including phenol, methylamine, and the spiro cation. Furthermore, L-PDFT outperforms MC-PDFT and previous multistate PDFT methods for predicting vertical excitations from a variety of representative organic chromophores.

Building on the strengths of a double-hybrid density functional for excitation energies and inverted singlet-triplet energy gaps

It is demonstrated that a double hybrid density functional approximation, ωB88PTPSS, that incorporates equipartition of density functional theory and the non-local correlation, however with a meta-generalized gradient approximation correlation functional, as well as with the range-separated exchange of ωB2PLYP, provides accurate excitation energies for conventional systems, as well as correct prescription of negative singlet-triplet gaps for non-conventional systems with inverted gaps, without any necessity for parametric scaling of the same-spin and opposite-spin non-local correlation energies. Examined over "safe" excitations of the QUESTDB set, ωB88PTPSS performs quite well for open-shell systems, correctly and fairly accurately [relative to equation-of-motion coupled-cluster singles and doubles (EOM-CCSD) reference] predicts negative gaps for 50 systems with inverted singlet-triplet gaps, and is one of the leading performers for intramolecular charge-transfer excitations and achieves near-second-order approximate coupled cluster (CC2) and second-order algebraic diagrammatic construction quality for the Q1 and Q2 subsets. Subsequently, we tested ωB88PTPSS on two sets of real-life examples from recent computational chemistry literature-the low energy bands of chlorophyll a (Chl a) and a set of thermally activated delayed fluorescence (TADF) systems. For Chl a, ωB88PTPSS qualitatively and quantitatively achieves DLPNO-STEOM-CCSD-level performance and provides excellent agreement with experiment. For TADF systems, ωB88PTPSS agrees quite well with spin-component-scaled CC2 (SCS-CC2) excitation energies, as well as experimental values, for the gaps between the S₁ and T₁ excited states.

Large-Scale Benchmarking of Multireference Vertical-Excitation Calculations via Automated Active-Space Selection

We have calculated state-averaged complete-active-space self-consistent-field (SA-CASSCF), multiconfiguration pair-density functional theory (MC-PDFT), hybrid MC-PDFT (HMC-PDFT), and n-electron valence state second-order perturbation theory (NEVPT2) excitation energies with the approximate pair coefficient (APC) automated active-space selection scheme for the QUESTDB benchmark database of 542 vertical excitation energies. We eliminated poor active spaces (20-40% of calculations) by applying a threshold to the SA-CASSCF absolute error. With the remaining calculations, we find that NEVPT2 performance is significantly impacted by the size of the basis set the wave functions are converged in, regardless of the quality of their description, which is a problem absent in MC-PDFT. Additionally, we find that HMC-PDFT is a significant improvement over MC-PDFT with the translated PBE (tPBE) density functional and that it performs about as well as NEVPT2 and second-order coupled cluster on a set of 373 excitations in the QUESTDB database. We optimized the percentage of SA-CASSCF energy to include in HMC-PDFT when using the tPBE on-top functional, and we find the 25% value used in tPBE0 to be optimal. This work is by far the largest benchmarking of MC-PDFT and HMC-PDFT to date, and the data produced in this work are useful as a validation of HMC-PDFT and of the APC active-space selection scheme. We have made all the wave functions produced in this work (orbitals and CI vectors) available to the public and encourage the community to utilize this data as a tool in the development of further multireference model chemistries.

Multiconfiguration Pair-Density Functional Theory for Chromium(IV) Molecular Qubits

Pseudotetrahedral organometallic complexes containing chromium(IV) and aryl ligands have been experimentally identified as promising molecular qubit candidates. Here we present a computational protocol based on multiconfiguration pair-density functional theory for computing singlet-triplet gaps and zero-field splitting (ZFS) parameters in Cr(IV) aryl complexes. We find that two multireference methods, multistate complete active space second-order perturbation theory (MS-CASPT2) and hybrid multistate pair-density functional theory (HMS-PDFT), perform better than Kohn-Sham density functional theory for singlet-triplet gaps. Despite the very small values of the ZFS parameters, both multireference methods performed qualitatively well. MS-CASPT2 and HMS-PDFT performed particularly well for predicting the trend in the ratio of the rhombic and axial ZFS parameters, |E/D|. We have also investigated the dependence and sensitivity of the calculated ZFS parameters on the active space and the molecular geometry. The methodologies outlined here can guide future prediction of ZFS parameters in molecular qubit candidates.

Multireference Study of Optically Addressable Vanadium-Based Molecular Qubit Candidates

Molecular electron spin qubits with optical manipulation schemes are some of the most promising candidates for modern quantum technologies. Key values that determine a compound's viability for optical-spin initialization and readout include its singlet-triplet gap and zero-field splitting (ZFS) parameters. Generally, these values are very small in magnitude and are thus difficult to reproduce with theoretical methods. Here, we study a previously identified optically addressable molecular qubit, (C₆F₅)₃trenVCN^tBu (tren = tris(2-aminoethyl)amine), using the complete active space self-consistent field (CASSCF) and post-CASSCF methods: complete active space second-order perturbation theory (CASPT2), multiconfiguration pair-density functional theory (MC-PDFT), and hybrid MC-PDFT (HMC-PDFT). Of those methods, we successfully reproduce the singlet-triplet gap and ZFS parameters with reasonable accuracy using 0.5 HMC-PDFT and CASPT2. Four additional V³⁺ complexes with differing ligands were also investigated. We found that the ligands have minimal effect on the spin properties of the molecule and propose them to be optically addressable qubit candidates. These potential qubits are further analyzed in terms of ab initio ligand field theory (AILFT) to understand the influence of the ligands on the singlet-triplet gap and ZFS parameters.

Multiconfiguration Pair-Density Functional Theory Calculations of Iron(II) Porphyrin: Effects of Hybrid Pair-Density Functionals and Expanded RAS and DMRG Active Spaces on Spin-State Orderings

Iron(II) porphyrins play critical roles in enzymes and synthetic catalysts. Computationally determining the spin-state ordering for even the unsubstituted iron(II) porphyrin (FeP) is challenging due to its large size. Multiconfiguration pair-density functional theory (MC-PDFT), a method capable of accurately capturing correlation with lower cost than comparably accurate methods, was previously used to predict a triplet ground state for FeP across a wide range of active spaces up to (34e, 35o). The purpose of this present MC-PDFT study is to determine the effects of including nonlocal exchange in the energy calculation and of using a larger active space size [DMRG(40e, 42o) and RAS(40, 2, 2; 16, 6, 20)] on the calculated FeP spin-state ordering. The recently developed hybrid MC-PDFT method, which uses a weighted average of the MC-PDFT energy and the energy expectation value of the reference wave function, is applied with a weight of the reference wave function energy of λ. We find that increasing λ stabilizes the quintet relative to the triplets. The hybrid tPBE0 functional (tPBE with λ set to 0.25) consistently predicts a triplet ground state with the quintet lying above by 0.10-0.16 eV, depending on the reference wave function. These values are particularly interesting in light of tPBE0's very strong performance for a diverse set of other systems.

λ-DFVB(U): A hybrid density functional valence bond method based on unpaired electron density

In this paper, a hybrid density functional valence bond method based on unpaired electron density, called λ-DFVB(U), is presented, which is a combination of the valence bond self-consistent field (VBSCF) method and Kohn–Sham density functional theory. In λ-DFVB(U), the double-counting error of electron correlation is mitigated by a linear decomposition of the electron–electron interaction using a parameter λ, which is a function of an index based on the number of effectively unpaired electrons. In addition, λ-DFVB(U) is based on the approximation that correlation functionals in KS-DFT only cover dynamic correlation and exchange functionals mimic some amount of static correlation. Furthermore, effective spin densities constructed from unpaired density are used to address the symmetry dilemma problem in λ-DFVB(U). The method is applied to test calculations of atomization energies, atomic excitation energies, and reaction barriers. It is shown that the accuracy of λ-DFVB(U) is comparable to that of CASPT2, while its computational cost is approximately the same as VBSCF.

Music Choreography Algorithm Based on Feature Matching and Fragment Segmentation

Choreography is an art form in and of itself. Because music and dance have always appeared at the same time throughout human history, music has had a significant influence on dance arrangement. It is important to arrange appropriate dance movements based on the music pieces chosen by users when creating choreography. This paper proposes a mixed density network-based music choreography algorithm in response to the current state of music choreography. The algorithm should be able to convert motion and music signals into a high-level semantic meaning that is compatible with human cognition, compare the degree of matching, and arrange the dance based on the music and motion segments that match. Furthermore, the consistency and authenticity of the movements in the dance created in this paper have been improved. Users' subjective feedback indicates that the choreography results in this paper are more closely aligned with the music. In the field of music choreography, it has some practical utility.

Electronic structure of strongly correlated systems: recent developments in multiconfiguration pair-density functional theory and multiconfiguration nonclassical-energy functional theory

Strong electron correlation plays an important role in transition-metal and heavy-metal chemistry, magnetic molecules, bond breaking, biradicals, excited states, and many functional materials, but it provides a significant challenge for modern electronic structure theory. The treatment of strongly correlated systems usually requires a multireference method to adequately describe spin densities and near-degeneracy correlation. However, quantitative computation of dynamic correlation with multireference wave functions is often difficult or impractical. Multiconfiguration pair-density functional theory (MC-PDFT) provides a way to blend multiconfiguration wave function theory and density functional theory to quantitatively treat both near-degeneracy correlation and dynamic correlation in strongly correlated systems; it is more affordable than multireference perturbation theory, multireference configuration interaction, or multireference coupled cluster theory and more accurate for many properties than Kohn–Sham density functional theory. This perspective article provides a brief introduction to strongly correlated systems and previously reviewed progress on MC-PDFT followed by a discussion of several recent developments and applications of MC-PDFT and related methods, including localized-active-space MC-PDFT, generalized active-space MC-PDFT, density-matrix-renormalization-group MC-PDFT, hybrid MC-PDFT, multistate MC-PDFT, spin–orbit coupling, analytic gradients, and dipole moments. We also review the more recently introduced multiconfiguration nonclassical-energy functional theory (MC-NEFT), which is like MC-PDFT but allows for other ingredients in the nonclassical-energy functional. We discuss two new kinds of MC-NEFT methods, namely multiconfiguration density coherence functional theory and machine-learned functionals.

This feature article overviews recent work on active spaces, matrix product reference states, treatment of quasidegeneracy, hybrid theory, density-coherence functionals, machine-learned functionals, spin–orbit coupling, gradients, and dipole moments.

Quantum-classical hybrid algorithm for the simulation of all-electron correlation

While chemical systems containing hundreds to thousands of electrons remain beyond the reach of quantum devices, hybrid quantum-classical algorithms present a promising pathway toward a quantum advantage. Hybrid algorithms treat the exponentially scaling part of the calculation-the static correlation-on the quantum computer and the non-exponentially scaling part-the dynamic correlation-on the classical computer. While a variety of algorithms have been proposed, the dependence of many methods on the total wave function limits the development of easy-to-use classical post-processing implementations. Here, we present a novel combination of quantum and classical algorithms, which computes the all-electron energy of a strongly correlated molecular system on the classical computer from the 2-electron reduced density matrix (2-RDM) evaluated on the quantum device. Significantly, we circumvent the wave function in the all-electron calculations by using density matrix methods that only require input of the statically correlated 2-RDM. Although the algorithm is completely general, we test it with two classical density matrix methods, the anti-Hermitian contracted Schrödinger equation (ACSE) and multiconfiguration pair-density functional theories, using the recently developed quantum ACSE method for simulating the statically correlated 2-RDM. We obtain experimental accuracy for the relative energies of all three benzyne isomers and thereby demonstrate the ability of the developed algorithm to achieve chemically relevant and accurate results on noisy intermediate-scale quantum devices.

Dipole Moment Calculations Using Multiconfiguration Pair-Density Functional Theory and Hybrid Multiconfiguration Pair-Density Functional Theory

The dipole moment is the molecular property that most directly indicates molecular polarity. The accuracy of computed dipole moments depends strongly on the quality of the calculated electron density, and the breakdown of single-reference methods for strongly correlated systems can lead to poor predictions of the dipole moments in those cases. Here, we derive the analytical expression for obtaining the electric dipole moment by multiconfiguration pair-density functional theory (MC-PDFT), and we assess the accuracy of MC-PDFT for predicting dipole moments at equilibrium and nonequilibrium geometries. We show that MC-PDFT dipole moment curves have reasonable behavior even for stretched geometries, and they significantly improve upon the CASSCF results by capturing more electron correlation. The analysis of a dataset consisting of 18 first-row transition-metal diatomics and 6 main-group polyatomic molecules with a multireference character suggests that MC-PDFT and its hybrid extension (HMC-PDFT) perform comparably to CASPT2 and MRCISD+Q methods and have a mean unsigned deviation of 0.2-0.3 D with respect to the best available dipole moment reference values. We explored the dependence of the predicted dipole moments upon the choice of the on-top density functional and active space, and we recommend the tPBE and hybrid tPBE0 on-top choices for the functionals combined with the moderate correlated-participating-orbitals scheme for selecting the active space. With these choices, the mean unsigned deviations (in debyes) of the calculated equilibrium dipole moments from the best estimates are 0.77 for CASSCF, 0.29 for MC-PDFT, 0.24 for HMC-PDFT, 0.28 for CASPT2, and 0.25 for MRCISD+Q. These results are encouraging because the computational cost of MC-PDFT or HMC-PDFT is largely reduced compared to the CASPT2 and MRCISD+Q methods.

Assessing challenging intra- and inter-molecular charge-transfer excitations energies with double-hybrid density functionals

We investigate the performance of a set of recently introduced range-separated double-hybrid functionals, namely ωB2-PLYP, ωB2GP-PLYP, RSX-0DH, and RSX-QIDH models for hard-to-calculate excitation energies. We compare with the parent (B2-PLYP, B2GP-PLYP, PBE0-DH, and PBE-QIDH) and other (DSD-PBEP86) double-hybrid models as well as with some of the most widely employed hybrid functionals (B3LYP, PBE0, M06-2X, and ωB97X). For this purpose, we select a number of medium-sized intra- and inter-molecular charge-transfer excitations, which are known to be challenging to calculate using time-dependent density-functional theory (TD-DFT) and for which accurate reference values are available. We assess whether the high accuracy shown by the newest double-hybrid models is also confirmed for those cases too. We find that asymptotically corrected double-hybrid models yield a superior performance, especially for the inter-molecular charge-transfer excitation energies, as compared to standard double-hybrid models. Overall, the PBE-QIDH and its corresponding range-separated RSX-QIDH functional are recommended for general-purpose TD-DFT applications, depending on whether long-range effects are expected to play a significant role.