Super Temporal-Resolved Microscopy (STReM)

Single-Molecule Imaging in Commercial Stationary Phase Particles Using Highly Inclined and Laminated Optical Sheet Microscopy

We resolve the three-dimensional, nanoscale locations of single-molecule analytes within commercial stationary phase materials using highly inclined and laminated optical sheet (HILO) microscopy. Single-molecule fluorescence microscopy of chromatography can reveal the molecular heterogeneities that lead to peak broadening, but past work has focused on surfaces designed to mimic stationary phases, which have different physical and chemical properties than the three-dimensional materials used in real columns and membranes. To extend single-molecule measurements to commercial stationary phases, we immobilize individual stationary phase particles and modify our microscope for imaging at further depths with HILO, a method which was originally developed to resolve single molecules in cells of comparable size to column packing materials (∼5-10 μm). We describe and characterize how to change the angle of incidence to achieve HILO so that other researchers can easily incorporate this method onto their existing epi- or total internal reflection fluorescence microscopes. We show improvements up to a 32% in signal-to-background ratio and 118% in the number of single molecules detected within stationary phase particles when using HILO compared to epifluorescence. By controlling the objective position relative to the sample, we produce three-dimensional maps of molecule locations throughout entire stationary phase particles at nanoscale lateral and axial resolutions. The number of localized molecules remains constant axially throughout isolated stationary phase particles and between different particles, indicating that heterogeneity in a separation would not be caused by such affinity differences at microscales but instead kinetic differences at nanoscales on identifiable and distinct adsorption sites.

Calcite-Assisted Localization and Kinetics (CLocK) Microscopy

Localization-based super-resolution imaging techniques have improved the spatial resolution of optical microscopy well below the diffraction limit, yet encoding additional information into super-resolved images, such as anisotropy and orientation, remains a challenge. Here we introduce calcite-assisted localization and kinetics (CLocK) microscopy, a multiparameter super-resolution imaging technique easily integrated into any existing optical microscope setup at low cost and with straightforward analysis. By placing a rotating calcite crystal in the infinity space of an optical microscope, CLocK microscopy provides immediate polarization and orientation information while maintaining the ability to localize an emitter/scatterer with <10 nm resolution. Further, kinetic information an order of magnitude shorter than the integration time of the camera is encoded in the unique point spread function of a CLocK image, allowing for new mechanistic insight into dynamic processes such as single-nanoparticle dissolution and single-molecule surface-enhanced Raman scattering.

Vibrational Sum-Frequency Generation Hyperspectral Microscopy for Molecular Self-Assembled Systems

In this review, we discuss the recent developments and applications of vibrational sum-frequency generation (VSFG) microscopy. This hyperspectral imaging technique can resolve systems without inversion symmetry, such as surfaces, interfaces and noncentrosymmetric self-assembled materials, in the spatial, temporal, and spectral domains. We discuss two common VSFG microscopy geometries: wide-field and confocal point-scanning. We then introduce the principle of VSFG and the relationships between hyperspectral imaging with traditional spectroscopy, microscopy, and time-resolved measurements. We further highlight crucial applications of VSFG microscopy in self-assembled monolayers, cellulose in plants, collagen fibers, and lattice self-assembled biomimetic materials. In these systems, VSFG microscopy reveals relationships between physical properties that would otherwise be hidden without being spectrally, spatially, and temporally resolved. Lastly, we discuss the recent development of ultrafast transient VSFG microscopy, which can spatially measure the ultrafast vibrational dynamics of self-assembled materials. The review ends with an outlook on the technical challenges of and scientific potential for VSFG microscopy.

Super-resolution Microscopy for Biological Imaging

Studying the ultra-fine structures and functions of the subcellular organelles and exploring the dynamic biological events in depth are the key issues in contemporary biological research. Fluorescence bio-imaging has been used to study cell biology for decades. However, the structures and functions of the subcellular organelles which fall under the diffraction limit are still not explored fully at a nanoscale level. Several super-resolution microscopy (SRM) techniques have been devised over the years which can be utilized to overcome diffraction limit. These techniques have opened a new window in biological research. However, SRM methods are highly vulnerable to the lack of appropriate fluorophores and other sophisticated technical considerations. Therefore, this chapter briefly summarizes the basic principles of various SRM methods which have been frequently utilized in biological imaging. The chapter not only gives an overview of the technical advantages and drawbacks about using different SRM techniques for bio-imaging applications but also briefly articulates the nitty-gritties of selecting a proper fluorescent probe for a specific SRM experiment with biological samples.

Transforming Separation Science with Single-Molecule Methods

Empirical optimization of the multiscale parameters underlying chromatographic and membrane separations leads to enormous resource waste and production costs. A bottom-up approach to understand the physical phenomena underlying challenges in separations is possible with single-molecule observations of solute-stationary phase interactions. We outline single-molecule fluorescence techniques that can identify key interactions under ambient conditions. Next, we describe how studying increasingly complex samples heightens the relevance of single-molecule results to industrial applications. Finally, we illustrate how separation methods that have not been studied at the single-molecule scale can be advanced, using chiral chromatography as an example case. We hope new research directions based on a molecular approach to separations will emerge based on the ideas, technologies, and open scientific questions presented in this Perspective.

Dual-Mode Superresolution Imaging Using Charge Transfer Dynamics in Semiconducting Polymer Dots

In a conjugated polymer-based single-particle heterojunction, stochastic fluctuations of the photogenerated hole population lead to spontaneous fluorescence switching. We found that 405 nm irradiation can induce charge recombination and activate the single-particle emission. Based on these phenomena, we developed a novel class of semiconducting polymer dots that can operate in two superresolution imaging modes. The spontaneous switching mode offers efficient imaging of large areas, with <10 nm localization precision, while the photoactivation/deactivation mode offers slower imaging, with further improved localization precision (ca. 1 nm), showing advantages in resolving small structures that require high spatial resolution. Superresolution imaging of microtubules and clathrin-coated pits was demonstrated, under both modes. The excellent localization precision and versatile imaging options provided by these nanoparticles offer clear advantages for imaging of various biological systems.

Nanoscale optical imaging in chemistry

Single-molecule-level measurements are bringing about a revolution in our understanding of chemical and biochemical processes. Conventional measurements are performed on large ensembles of molecules. Such ensemble-averaged measurements mask molecular-level dynamics and static and dynamic fluctuations in reactivity, which are vital to a holistic understanding of chemical reactions. Watching reactions on the single-molecule level provides access to this otherwise hidden information. Sub-diffraction-limited spatial resolution fluorescence imaging methods, which have been successful in the field of biophysics, have been applied to study chemical processes on single-nanoparticle and single-molecule levels, bringing us new mechanistic insights into physiochemical processes. However, the scope of chemical processes that can be studied using fluorescence imaging is considerably limited; the chemical reaction has to be designed such that it involves fluorophores or fluorogenic probes. In this article, we review optical imaging modalities alternative to fluorescence imaging, which expand greatly the range of chemical processes that can be probed with nanoscale or even single-molecule resolution. First, we show that the luminosity, wavelength, and intermittency of solid-state photoluminescence (PL) can be used to probe chemical transformations on the single-nanoparticle-level. Next, we highlight case studies where localized surface plasmon resonance (LSPR) scattering is used for tracking solid-state, interfacial, and near-field-driven chemical reactions occurring in individual nanoscale locations. Third, we explore the utility of surface- and tip-enhanced Raman scattering to monitor individual bond-dissociation and bond-formation events occurring locally in chemical reactions on surfaces. Each example has yielded some new understanding about molecular mechanisms or location-to-location heterogeneity in chemical activity. The review finishes with new and complementary tools that are expected to further enhance the scope of knowledge attainable through nanometer-scale resolution chemical imaging.

Imaging Switchable Protein Interactions with an Active Porous Polymer Support

Mechanistic details about how local physicochemistry of porous interfaces drives protein transport mechanisms are necessary to optimize biomaterial applications. Cross-linked hydrogels made of stimuli-responsive polymers have potential for active protein capture and release through tunable steric and chemical transformations. Simultaneous monitoring of dynamic changes in both protein transport and interfacial polymer structure is an experimental challenge. We use single-particle tracking (SPT) and fluorescence correlation spectroscopy Super-resolution Optical Fluctuation Imaging (fcsSOFI) to relate the switchable changes in size and structure of a pH-responsive hydrogel to the interfacial transport properties of a model protein, lysozyme. SPT analysis reveals the reversible switching of protein transport dynamics in and at the hydrogel polymer in response to pH changes. fcsSOFI allows us to relate tunable heterogeneity of the hydrogels and pores to reversible changes in the distribution of confined diffusion and adsorption/desorption. We find that physicochemical heterogeneity of the hydrogels dictates protein confinement and desorption dynamics, particularly at pH conditions in which the hydrogels are swollen.

Polymer Free Volume Effects on Protein Dynamics in Polystyrene Revealed by Single-Molecule Spectroscopy

Protein-polymer interactions are critical to applications ranging from biomedical devices to chromatographic separations. The mechanistic relationship between the microstructure of polymer chains and protein interactions is challenging to quantify and not well studied. Here, single-molecule microscopy is used to compare the dynamics of two model proteins, α-lactalbumin and lysozyme, at the interface of uncharged polystyrene with varied molecular weights. The two proteins exhibit different surface interaction mechanisms despite having a similar size and structure. α-Lactalbumin exhibits interfacial adsorption-desorption with residence times that depend on polymer molecular weight. Lysozyme undergoes a continuous time random walk at the polystyrene surface with residence times that also depend on the molecular weight of polystyrene. Single-molecule observables suggest that the hindered continuous time random walk dynamics displayed by lysozyme are determined by the polystyrene free volume, a finding supported by thermal annealing and solvent quality studies. Hindered dynamics are dominated by short-range hydrophobic interactions where the contributions of electrostatic forces are negligible. This work establishes a relationship between the microscale structure (i.e., free volume) of polystyrene polymer chains to nanoscale interfacial protein dynamics.

A mechanistic examination of salting out in protein-polymer membrane interactions

Developing a mechanistic understanding of protein dynamics and conformational changes at polymer interfaces is critical for a range of processes including industrial protein separations. Salting out is one example of a procedure that is ubiquitous in protein separations yet is optimized empirically because there is no mechanistic description of the underlying interactions that would allow predictive modeling. Here, we investigate peak narrowing in a model transferrin-nylon system under salting out conditions using a combination of single-molecule tracking and ensemble separations. Distinct surface transport modes and protein conformational changes at the negatively charged nylon interface are quantified as a function of salt concentration. Single-molecule kinetics relate macroscale improvements in chromatographic peak broadening with microscale distributions of surface interaction mechanisms such as continuous-time random walks and simple adsorption-desorption. Monte Carlo simulations underpinned by the stochastic theory of chromatography are performed using kinetic data extracted from single-molecule observations. Simulations agree with experiment, revealing a decrease in peak broadening as the salt concentration increases. The results suggest that chemical modifications to membranes that decrease the probability of surface random walks could reduce peak broadening in full-scale protein separations. More broadly, this work represents a proof of concept for combining single-molecule experiments and a mechanistic theory to improve costly and time-consuming empirical methods of optimization.

A High-Throughput Image Correlation Method for Rapid Analysis of Fluorophore Photoblinking and Photobleaching Rates

Super-resolution fluorescence imaging based on localization microscopy requires tuning the photoblinking properties of fluorescent dyes employed. Missing is a rapid way to analyze the blinking rates of the fluorophore probes. Herein we present an ensemble autocorrelation technique for rapidly and simultaneously measuring photoblinking and bleaching rate constants from a microscopy image time series of fluorescent probes that is significantly faster than individual single-molecule trajectory analysis approaches. Our method is accurate for probe densities typically encountered in single-molecule studies as well as for higher density systems which cannot be analyzed by standard single-molecule techniques. We also show that we can resolve characteristic blinking times that are faster than camera detector exposure times, which cannot be accessed by threshold-based single-molecule approaches due to aliasing. We confirm this through computer simulation and single-molecule imaging data of DNA-Cy5 complexes. Finally, we demonstrate that with sufficient sampling our technique can accurately recover rates from stochastic optical reconstruction microscopy super-resolution data.

Microscopy and Cell Biology: New Methods and New Questions

Understanding the cellular basis of human health and disease requires the spatial resolution of microscopy and the molecular-level details provided by spectroscopy. This review highlights imaging methods at the intersection of microscopy and spectroscopy with applications in cell biology. Imaging methods are divided into three broad categories: fluorescence microscopy, label-free approaches, and imaging tools that can be applied to multiple imaging modalities. Just as these imaging methods allow researchers to address new biological questions, progress in biological sciences will drive the development of new imaging methods. We highlight four topics in cell biology that illustrate the need for new imaging tools: nanoparticle-cell interactions, intracellular redox chemistry, neuroscience, and the increasing use of spheroids and organoids. Overall, our goal is to provide a brief overview of individual imaging methods and highlight recent advances in the use of microscopy for cell biology.

Generalized method to design phase masks for 3D super-resolution microscopy

Point spread function (PSF) engineering by phase modulation is a novel approach to three-dimensional (3D) super-resolution microscopy, with different point spread functions being proposed for specific applications. It is often not easy to achieve the desired shape of engineered point spread functions because it is challenging to determine the correct phase mask. Additionally, a phase mask can either encode 3D space information or additional time information, but not both simultaneously. A robust algorithm for recovering a phase mask to generate arbitrary point spread functions is needed. In this work, a generalized phase mask design method is introduced by performing an optimization. A stochastic gradient descent algorithm and a Gauss-Newton algorithm are developed and compared for their ability to recover the phase masks for previously reported point spread functions. The new Gauss-Newton algorithm converges to a minimum at much higher speeds. This algorithm is used to design a novel stretching-lobe phase mask to encode temporal and 3D spatial information simultaneously. The stretching-lobe phase mask and other masks are fabricated in-house for proof-of-concept using multi-level light lithography and an optimized commercially sourced stretching-lobe phase mask (PM) is validated experimentally to encode 3D spatial and temporal information. The algorithms' generalizability is further demonstrated by generating a phase mask that comprises four different letters at different depths.

Integrated light-sheet illumination using metallic slit microlenses

Light sheet microscopy (LSM) - also known as selective plane illumination microscopy (SPIM) - enables high-speed, volumetric imaging by illuminating a two-dimensional cross-section of a specimen. Typically, this light sheet is created by table-top optics, which limits the ability to miniaturize the overall SPIM system. Replacing this table-top illumination system with miniature, integrated devices would reduce the cost and footprint of SPIM systems. One important element for a miniature SPIM system is a flat, easily manufactured lens that can form a light sheet. Here we investigate planar metallic lenses as the beam shaping element of an integrated SPIM illuminator. Based on finite difference time domain (FDTD) simulations, we find that diffraction from a single slit can create planar illumination with a higher light throughput than zone plate or plasmonic lenses. Metallic slit microlenses also show broadband operation across the entire visible range and are nearly polarization insensitive. Furthermore, compared to meta-lenses based on sub-wavelength-scale diffractive elements, metallic slit lenses have micron-scale features compatible with low-cost photolithographic manufacturing. These features allow us to create inexpensive integrated devices that generate light-sheet illumination comparable to tabletop microscopy systems. Further miniaturization of this type of integrated SPIM illuminators will open new avenues for flat, implantable photonic devices for in vivo biological imaging.

From a Protein's Perspective: Elution at the Single-Molecule Level

Column chromatography is a widely used analytical technique capable of identifying and isolating a desired chemical species from a more complicated mixture. Despite the method's prevalence, theoretical descriptions have not advanced to accommodate today's common analyte, proteins. Proteins are increasingly used as biologics, a term that refers to biological pharmaceuticals, and present new complexities for chromatographic separation. Large variations in surface charge, chemistry, and structure among protein analytes expose the limits in the current theoretical framework's ability to predict the efficiency of a column without empirical data. The bottleneck created by empirical optimization is a strong motivation for a renewed effort to achieve an in-depth understanding of the range of interactions that occur between a protein analyte and the stationary phase that together enable its selective separation from other constituents of a mixture. The physical and chemical processes that dictate the amount of time an analyte spends in the column are often abstracted by theory and treated as statistical distributions. Until recently, these distributions could not be mapped experimentally as traditional experimental techniques could not reveal underlying heterogeneity in structure, charge, and dynamics. Aligning the latest experimental and theoretical advances is thus a hurdle to be overcome so that significant progress can be made toward a predictive chromatographic theory. In this Account, we detail the work of the Landes Lab in developing single-molecule techniques that refine the stochastic theory of chromatography as a first step toward predictive chromatographic column design. We provide a brief review of the development of stochastic theory and establish a mathematical framework to put the discussed physical chemistry in context. We describe our investigations of three pertinent phenomena: mobile/stationary phase exchange, adsorption/desorption kinetics, and hindered diffusion. We highlight experimental evidence that points to nonuniform behavior. Then, we describe our work in developing single-molecule techniques that can evaluate these effects on a protein-by-protein basis. We highlight two developments: fast imaging via super temporal-resolved microscopy (STReM) and visualizing diffusion within pores via a combination of fluorescence correlation spectroscopy and super-resolution optical fluctuation imaging (fcsSOFI). Both methods offer new ways to study chromatographic elution at the single-protein level. Such methods can identify the rare heterogeneities that prevent efficient separations and advance the field closer to predictively optimized protein separations.

Super-Temporal-Resolved Microscopy Reveals Multistep Desorption Kinetics of α-Lactalbumin from Nylon

Insight into the mechanisms driving protein-polymer interactions is constantly improving due to advances in experimental and computational methods. In this study, we used super-temporal-resolved microscopy (STReM) to study the interfacial kinetics of a globular protein, α-lactalbumin (α-LA), adsorbing at the water-nylon 6,6 interface. The improved temporal resolution of STReM revealed that residence time distributions involve an additional step in the desorption process. Increasing the ionic strength in the bulk solution accelerated the desorption rate of α-LA, attributed to adsorption-induced conformational changes. Ensemble circular dichroism measurements were used to support a consecutive reaction mechanism. Without the improved temporal resolution of STReM, the desorption intermediate was not resolvable, highlighting both STReM's potential to uncover new kinetic mechanisms and the continuing need to push for better time and space resolution.

Enhancing Analytical Separations Using Super-Resolution Microscopy

Super-resolution microscopy is becoming an invaluable tool to investigate structure and dynamics driving protein interactions at interfaces. In this review, we highlight the applications of super-resolution microscopy for quantifying the physics and chemistry that occur between target proteins and stationary-phase supports during chromatographic separations. Our discussion concentrates on the newfound ability of super-resolved single-protein spectroscopy to inform theoretical parameters via quantification of adsorption-desorption dynamics, protein unfolding, and nanoconfined transport.

Photobleaching of YOYO-1 in super-resolution single DNA fluorescence imaging

Super-resolution imaging of single DNA molecules via point accumulation for imaging in nanoscale topography (PAINT) has great potential to visualize fine DNA structures with nanometer resolution. In a typical PAINT video acquisition, dye molecules (YOYO-1) in solution sparsely bind to the target surfaces (DNA) whose locations can be mathematically determined by fitting their fluorescent point spread function. Many YOYO-1 molecules intercalate into DNA and remain there during imaging, and most of them have to be temporarily or permanently fluorescently bleached, often stochastically, to allow for the visualization of a few fluorescent events per DNA per frame of the video. Thus, controlling the fluorescence on-off rate is important in PAINT. In this paper, we study the photobleaching of YOYO-1 and its correlation with the quality of the PAINT images. At a low excitation laser power density, the photobleaching of YOYO-1 is too slow and a minimum required power density was identified, which can be theoretically predicted with the proposed method in this report.

Variable Lysozyme Transport Dynamics on Oxidatively Functionalized Polystyrene Films

Tuning protein adsorption dynamics at polymeric interfaces is of great interest to many biomedical and material applications. Functionalization of polymer surfaces is a common method to introduce application-specific surface chemistries to a polymer interface. In this work, single-molecule fluorescence microscopy is utilized to determine the adsorption dynamics of lysozyme, a well-studied antibacterial protein, at the interface of polystyrene oxidized via UV exposure and oxygen plasma and functionalized by ligand grafting to produce varying degrees of surface hydrophilicity, surface roughness, and induced oxygen content. Single-molecule tracking indicates lysozyme loading capacities, and surface mobility at the polymer interface is hindered as a result of all functionalization techniques. Adsorption dynamics of lysozyme depend on the extent and the specificity of the oxygen functionalities introduced to the polystyrene surface. Hindered adsorption and mobility are dominated by hydrophobic effects attributed to water hydration layer formation at the functionalized polystyrene surfaces.

Single Particle Tracking: From Theory to Biophysical Applications

After three decades of developments, single particle tracking (SPT) has become a powerful tool to interrogate dynamics in a range of materials including live cells and novel catalytic supports because of its ability to reveal dynamics in the structure-function relationships underlying the heterogeneous nature of such systems. In this review, we summarize the algorithms behind, and practical applications of, SPT. We first cover the theoretical background including particle identification, localization, and trajectory reconstruction. General instrumentation and recent developments to achieve two- and three-dimensional subdiffraction localization and SPT are discussed. We then highlight some applications of SPT to study various biological and synthetic materials systems. Finally, we provide our perspective regarding several directions for future advancements in the theory and application of SPT.